APPLICATION SOFTWARE USER MANUAL

Transcription

1 Digital Video Recording System APPLICATION SOFTWARE USER MANUAL TARGET MODEL: XECAP-SERIES/ XED Version All information contained in this manual is subject to change COMART SYSTEM CO., LTD

2 CONTENTS 1 INTRODUCTION BOARD SPECIFICATION BOARD SPECIFICATION (XED SERIES) XECAP BOARD LAYOUT AND DESCRIPTION ADDITIONAL OPTION FOR XECAP PC SPECIFICATION REQUIRED CD DIRECTRORY STRUCTURE GETTING STARTED DRIVER INSTALLATION APPLICATION SOFTWARE INSTALLAION SOFTWARE FUNCTION STARTINHG ND MAIN PROGRAM MAIN APPLICATION LAY OUT INFORMATION APPLICATION SETUP LOGIN SETUP OSD SETTING MONITOR SETTING OTHER OPTION SYSTEM WATCH DOG FUNCTION NETWORK PERMISSION CAMERA COLOR PTZ RECORDING AUDIO DRIVE

3 16.15 SCHEDULE SYSTEM INFORMATION EVENT MOTION DETECTION AUDIO DETECTION CONNECTION SENSOR INPUT ALARM OUTPUT CONNECTION SEARCH EXPORT ZOOM PANORAMA BOOKMARK FUNCTION CELL EDITOR BACKUP MODE BACKUP VIEWER CMS (CONTROL MONITORING SYSTEM) SYSTEM SETUP RECORDING SEARCH MODE CMS PTZ DDNS WATER MARK FUNCTION UNINSTALLATION & UPDATE NEW SOFTWARE

4 1 INTRODUCTION Dear Customer, Firstly, we would like to thank you for purchasing Comart DVR products and applications. At Comart System Co, LTD. We have occurred DVR fields with innovative products as a market leader since 1995 Our dedicated products have been manufactured to meet the highest quality standard. Moreover, Comart always strives to offer premium quality products in order to satisfy customer s needs and demands. Now, we are the one of the fast growing companies in DVR boards market in Korea and Global. As of Feb 2003, more than 300 companies from global have used our DVR boards. The main reason to be successful and catch their attention were as you recognize, we support reliable and excellent DVR solutions to our customers with reasonable price. We wish you have satisfaction with our products. We commit that you will experience the cutting-edge technology with Comart. If you have any queries in relation to price and products, do not hesitate to contact us. We will treat you as our best customer. Comart System Co., Ltd

5 2 BOARD SPECIFICATION MODEL NUMBER XECAP50B XECAP100B XECAP200B MESUREMENT SIZE mm mm mm in in in XECAP Board g / 0.26lbs g / 0.33lbs 158 g / 0.34 lbs WEIGHT 24CH Extension kit NOT SUPPORTED g / 0.38lbs g / 0.39 lbs 32CH Extension kit NOT SUPPORTED g / 0.39lbs g / 0.40 lbs Power Consumption 3.915W 6.3W 8.4 W PCI Interface 33Mhz PCI Rev. 2.2 Compliant BUS Master, 132Mbyte/sec Input number max 16 Max 32 (Default 16ch) VIDEO Input Voltage Input Impedance Format Connection Type No. 1 1V p.p. 75Ω 50Hz PAL, 60Hz NTSC External DVI BNC Cable Internal Molex Cable 1 Channel Full Screen TV-OUT w/ OSD. Different from No.2 TV Out No. 2 Multi-Channel TV-OUT of 13 Division Mode(For Multi-Channel TV-Out, only Xecap 1 Channel Full-screen TV-Out / OSD. 50B and Xecap 100B are supported) Different from No.1 Total Display Frame rate Total Recording Frame rate 60(NTSC), 50(PAL) 120(NTSC), 100(PAL) 240(NTSC), 200(PAL) Recording Frame per channel 16CH 3 FPS 6 FPS 12 FPS 24CH NOT AVAILABLE 4 FPS 8 FPS 32CH NOT AVAILABLE 3 FPS 6 FPS VIDEO TYPE NTSC PAL Supported Resolution CIF CIF CIF S/W Video Codec MJPEG, MPEG4 Input number AUDIO Input Format Sampling Rate Connection Analog Line in 22 KHz External RCA Cable Internal Molex Cable Output Line Output 1, Speaker Output 1-5 -

6 3 BOARD SPECIFICATION (XED SERIES) MODEL NUMBER XED 4010 XED4020 XED 4040 MESUREMENT SIZE mm mm mm in in in WEIGHT XED Board g / 0.37lbs g / 0.37lbs 175 g / 0.37 lbs Power Consumption 8.5W 8.5W 8.5 W PCI Interface 33Mhz PCI Rev. 2.2 Compliant BUS Master, 132Mbyte/sec Input number max 16 VIDEO Input Voltage Input Impedance Format Connection Type No. 1 1V p.p. 75Ω 50Hz PAL, 60Hz NTSC External DVI BNC Cable Internal Molex Cable 1 Channel Full Screen TV-OUT w/ OSD. Different from No.2 TV Out No. 2 Multi-Channel TV-OUT of 13 Division Mode(For Multi-Channel TV-Out, only Xecap 1 Channel Full-screen TV-Out / OSD. 50B and Xecap 100B are supported) Different from No.1 Total Display Frame rate Total Recording Frame rate(ntsc/pal) REAL-LIVE 120/ / /400 Recording Frame per channel 16CH 7/6 FPS 15/12 FPS 30/25 FPS 24CH NOT AVAILABLE NOT AVAILABLE NOT AVAILABLE 32CH NOT AVAILABLE NOT AVAILABLE NOT AVAILABLE VIDEO TYPE NTSC PAL Supported Resolution CIF CIF CIF S/W Video Codec MJPEG, MPEG4 Input number 16 AUDIO Input Format Sampling Rate Connection Analog Line in 22 KHz External RCA Cable Internal Molex Cable Output Line Output 1, Speaker Output 1-6 -

7 In Xecap100B and Xecap200B boards, display channel number can be increased by adding 24 channels. Expansion kit 24 and 32 channel expansion kit. On the other hand, Xecap50B does not support expansion kit, 16 display channels only. In addition, two boards can be used in one system for Xecap100B board. In this case, maximum 64 display channels and 16 audio channels can be supported. Nonetheless, two boards can not be used in one system for Xecap200B due to its bandwidth limit. Hardware Information 1) DIO: DIO GUIDE needs to be purchased separately for sensor input and alarm output. 2) HERA: Since Xecap series support 4 to 16 audio channels as a default, they do not support HERA board. 3) COOLING FAN: Cooling Fan is not needed for Xecap board. Hardware Information for Xecap Series 1) Xecap50B : Board, Reset Cable, DVI-BNC Cable(18P), RCA Cable(8P) 2) Xecap100B : Board, Reset Cable, DVI-BNC Cable (18P), RCA Cable (12P) a. 24 Channel Extension Kit : 24 channel top board, 8 channel camera guide, Molex 8 pin cable (2 units), BNC cable ( 1 unit / 8 channels) b. 32 channel Expansion kit : 32 channel top board, 16 channel camera guide, Molex 8pin cable (4 units), BNC cable ( 2 units / 8 channels) 3) Xecap200B : Board, Reset Cable, DVI-BNC(18P), DVI-RCA Cable (18P) a. 24 channel Expansion kit : 24 channel top board, 8 channel camera guide, Molex 8pin cable (2 units), BNC cable 1 unit (8 channels) b. 32 channel Expansion kit : 32 channel top board, 16 channel camera guide, Molex 8 pin cable (4 units), BNC cable 2 units (8 channels) * In order to use Watchdog function, please connect reset cable to reset pin(s) of Xecap board and main board. If you would like to use reset switches of the PC case, please connect the reset cable of the PC case to the reset pin of the DVR board

8 4 XECAP BOARD LAYOUT AND DESCRIPTION XECAP50B Xecap50B supports 16 video channel and 4 audio channel as a default (Xecap50B does not support display channel upgrade through its expansion kit) 1) External BNC Connector: Video No. 1~16, TV-Out No.1~2 (Total 18 channels) 2) External RCA Connector: Audio No. 1~4, audio speaker output, audio line output (Total 6 channels) 3) Internal Molex Connector: Video No. 5~8 (Total 4 channel) 4) Internal Molex Connector: Video No. 1~4 (Total 4 channel) 5) Internal Molex Connector: Video No. 13~16 (Total 4 channel) 6) Internal Molex Connector: Video No. 9~12 (Total 4 channel) 7) Internal Molex Connector: Super Video output (Multi-channel video output) 8) Internal Molex Connector: Audio No. 1~4 (Total 4 channel) 9) Internal Molex Connector: Audio speaker output, audio line output, TV Out 1, TV Out 2 (Total 4 channel) 10) 75Ω Impedance switcher: Video No. 1~8 11) 75Ω Impedance switcher: Video No. 9~16-8 -

9 12) Reset Connector: Connect to Reset switch of PC case and DVR board 13) Watch-Dog Connector: Connect to Reset pin of the PC main board and DVR board 14) DIO Connector: Connects DIO-0402, DIO-0404 and DIO ** 10, 11) There is a 4pin dip switch on Xecap50B DVR board. This might be switched Off when you receive Xecap DVR board from Comart. Check your Xecap board and please switch No. 2, 3, and 4 off. * 18 channel BNC Cable connection form in the Xecap series (Identical for both Xecap 50B, 100B and 200A) 1~16. Video Input No. 1~ TV OUT 1 : 1 channel video output of full screen mode 18. TV OUT 2 : 1 channel video output of full screen mode or multi-channel video output of 13 division mode. * Xecap50B 8CH RCA cable connector configuration 1. Audio Input No Audio Input No Audio Input No Audio Input No Audio Speaker Output 6. Audio Line Output 7. No use 8. No use - 9 -

10 XECAP100B Xecap100B (Without expansion board, 16 video channel and 8 audio channel support) Xecap100B (With 24 channel board expansion, 24 video channel and 8 audio channel support) Xecap100B (With 32 channel board expansion, 32 video channel and 8 audio channel support)

11 1) External BNC Connector: Video No. 1~16, TV-out No. 1~2 (Total 18 channel) 2) External RCA Connector: Audio No. 1~16, audio speaker output, audio line output (Total 18 channel) 3) Internal Molex Connector: Video No. 1~4 (Total 4 channel) 4) Internal Molex Connector: Video No. 5~8 (Total 4 channel) 5) Internal Molex Connector: Video No. 9~12 (Total 4 channel) 6) Internal Molex Connector: Video No. 13~16 (Total 4 channel) 7) Internal Molex Connector: audio speaker output, audio line output, TV Out 1, TV Out 2 (Total 4 channel) 8) Internal Molex Connector: Audio No. 1~4 (Total 4 channel) 9) Internal Molex Connector: Audio No. 5~8 (Total 4 channel) 10) Internal Molex Connector: Audio No. 9~12 (Total 4 channel) 11) Internal Molex Connector: Audio No. 13~16 (Total 4 channel) 12) 75Ω Impedance switcher: Video No. 1~8 13) 75Ω Impedance switcher: Video No. 9~ ) Video channel expansion Connector: Connect to24 channel or 32 channel expansion board 16) Reset Connector: Connect to Reset switch of PC case and DVR board. 17) Watch-Dog Connector: Connect to Reset pin of PC main board and DVR board 18) DIO Connector: Connect to DIO-0402, DIO-0404 and DIO-0804 ** 12, 13) There is a 4pin dip switch on Xecap50B DVR board. This might be switched Off when you receive Xecap DVR board from Comart. Check your Xecap board and please switch No. 2, 3, and 4 off

12 * Xecap200B 18CH RCA cable connector Configuration 1~16. Audio input No. 1~ Audio line output 18. Audio speaker output Serial number can be found if you look at the back side of each board. If this serial number can not be found and/or is removed, our company is not responsible for free warranty. We guarantee free warranty of our product for 12 months, and each product s serial number starts as follows: Xecap50B : P6-XXXX-XXXX Xecap100B : P12-XXXX-XXXX Xecap200B : P24-XXXX-XXXX

13 5 ADDITIONAL OPTION FOR XECAP Channel Extension Kit (Can be used ONLY in XECAP200B or XECAP100B) Channel Expansion kit (Can be used ONLY in XECAP200B or XECAP100B) ComArt DIO Guide (Can be used in all Xecap series)

14 Comart s new DIO guide of DIO-0402, DIO-0404, DIO-0804 and DIO-1616 are being supported in Xecap series. Please make sure that Comart s old DIO guide named DIO-1604 does not work for Xecap series at all. If DIO-1604 is connected with Xecap series, it may damage the Xecap board connected with a DIO Pin assignments between old and new DIO guides are completely different and the way running them is different as well. The following picture describes the pin assignment of each DIO guide s terminal block: In order to use Comart s new DIO guides with Xecap series, you must provide a power adaptor to DIO guides (DC 12V& Ground). If not, they are not going to work properly. Xecap series contain RS422/485 function and you do not need any additional RS422/485 converter if you have installed any of above Comart new DIO guides. When you use only one Comart s new DIO guide, it is not able to support FULL RS422 function. It can only work for HALF RS485. In RS485 mode, the jumper setting for RS422/485 should be No. 2 (TX + RX) and that is Comart factory s default one. If you use two Comart new DIO guides in any combination as shown in the above referring to the JUMPER-PIN SETTING, then you can use FULL RS422 function. In RS 422 mode, one has to be selected as NO. 1 (TX only) and the other guide has to be selected as NO. 3 (RX only)

15 This combination sample in the below is DIO In order to use two Comart s new DIO guides, you must select which goes to be a master guide and a slave guide for certain. There is no priority to select a master or slave guide between models but they should not have the same master (or slave) mode

16 COMART USB DIO-1616 Comart DIO-1616 is an USB device that contains 16 sensor inputs & 16 alarm outputs, RS422/485 converter, and Real-Time clock. This is an independent device from DVR boards since it is a USB device. Therefore, you can use DIO-1616 not only for Xecap series but for Hicap and MIS series also. DIO 1616 LAYOUT & DESCRIPTION 1 Digital Input Port - Connect 16 sensor inputs to each port. (refer the following picture) Type: Falling Edge Detect Enable (when signal changes High to Low)

17 2 Communication select switch - Select full/half to set RS422/RS485 communication - If you select FULL (RS422) communication mode, you have to connect rx+, rx-, trx+(tx+), trx-(tx-) to each port. - If you select HALF (RS485) communication mode, you have to connect trx+, trx- to each port. 3 Communication Port - You can communicate with RS422/485 from PC to other devices (eg. PTZ Cameras). - Size of communication data : MAX 50 bytes - Baud rate : 2400, 4800, 9600, 19200, (bps) - Parity bit : no, even, odd, mark, space (parity) 4 Digital Output Port - Connect 16 alarm outputs to each port. - Every channel is composed with 3 ports (A, B, C) and when alarm is on, A and C are connected. When alarm is off, then B and C are connected.(please refer to the following picture) 5 Power1 Port - Main power input : DC 12V, 500mA(or above) 6 USB Port - Connect USB-DIO1616 to PC (does not use +5v from USB port) 7 State LED Port - Each LED (D1, D2, D3) displays current state of USB-DIO Board * D1 Red LED ----> ON: main power is supplied successfully. D1 Red LED ----> OFF: no power, all devices do not work. (If there is no error in your adaptor, it requires A/S or repairs.)

18 * D2 Green LED ----> ON: indicates half communication (RS485) is set. D2 Green LED ----> OFF: indicates full communication (RS422) is set. * D3 Yellow LED ----> ON: power2 is supplied successfully. D3 Yellow LED ----> OFF: no power, sensor input and RS422/RS485 communication do not work. (If there is no error in your adaptor, it requires A/S or repairs.) 8 Security Port - You must not use this port (If you remove label (sticker) in this port, you ll not able to get A/S Service from us later on) 9 Power2 Port - Power input for sensor and transceiver part: DC 12V, 500mA(or above)

19 6 PC SPECIFICATION REQUIRED There are slightly different PC specifications for Xecap series depending on board types and whether or not display channel extension kits are being installed. As for the recommended PC specification, please refer to the below. Regarding the recommended CPU and RAM for each board, please refer to the information after the recommended specification. PC MOTHERBOARD Our DVR boards are compatible with Intel a chipset ATX motherboard. I) VIA chipset : We found it works well in our test with some of VIA chipset motherboards. II) SIS chipset : We found it works well in our test with some of SIS chipset motherboards. * If you have a problem with any motherboards with Intel chipset, please contact us. CPU Since we recommend Intel chipset motherboard, we also recommend you to use Intel CPU because Intel does not support AMD CPU with their chipsets. We recommend Intel Pentium IV 2.4 or faster with our application. Please note that there are different minimum CPUs for each Xecap model as follows: 1) Xecap 50B: Pentium 4 and 1.6GHz 2) Xeap 100B: Pentium 4 and 2.0GHz 3) Xecap 200B: Pentium 4 and 2.4GHz VGA We recommend ATI chipset built-on AGP VGA card (on-board VGA card with video memory of 64MB and higher) I) Some customers use other chipset VGA card but we found that ATI VGA card is the one without any problem. II) If you still want to try other chipset VGA card, you need to test and find one at your side. Both ATI and NVDI VGA board types are most widely used, but please note that ATI Rage Pro 128 Model can not be used for our system. RAM We recommend 512MB or more (Dual Channel Memory) for increased speed. O/S and Other Software O/S : Windows 2000, Windows XP Others: DirectX 8.1a or higher version (If there is no display being seen on the screen, please check with DirectX)

20 < The recommended CPU and RAM for each board > The following table is based on ATI Radeon 7000 graphic card in our test. BOARD TYPE CPU RECOMMWNDWD PC REQUIREMENT RAM XECAP 50 XECAP 100B P4 2.0GHz Cel 2.0GHz P4 2.4GHz Cel 2.8GHz 512MB (Min CPU requirement: P4 1.6GHz) 512MB (Min CPU requirement: P4 2.0GHz) XECAP100B 2 P4 3.0 GHZ 512 MB XECAP 200B P4 2.8 GHz 512MB (Min CPU requirement: P4 2.4GHz) We recommend using Serial ATA HDD for fast data access in your system. Hard Disk We recommend minimum 2G free space in the system drive for your system after installing the Xecap software program. Others We recommend turning on the hyper threading function in your system s CMOS if your CPU supports the hyper threading function. Also, it is recommended to use more than two disk partitions for overwrite recording option

21 7 CD DIRECTRORY STRUCTURE On your CD provided, user will find this directory structure as below: Directory List 1. ND driver and software. 2. SDK program 3. Application Manual for users 4. Direct 9X It contains all the necessary software to operate system

22 8 GETTING STARTED Monitor Resolution Our application software is designed for Monitor Resolution 1024 x 768 pixels. If user monitor does not support this resolution, Comart application will not work properly on your system. Therefore, please set your monitor as follow. DIRECT X8.1 or HIGHER VERSION NEEDS TOBE INSTALLED Our Application program is required user s system with DirectX8.1 at least or higher version to be installed. If user has not installed it on the system, please install it from the provided CD. User can easily run the program and it will automatically install DirectX8.1 in the system

23 9 DRIVER INSTALLATION This following step is based on Window XP system. Installation on Window 2000 is same as XP. With the computer being turned off, please insert Xecap board in any vacant PCI slot. On the other hand, we recommend that PIC board should be distant between PCI cards because of heat from Card Power on user computer and start Windows XP. Windows XP will automatically find Xecap board as a new hardware device as follow; Click cancel to continue Then Insert CD in the system to install Xecap driver. It will display below window. Click Driver Install to install Xecap driver automatically

24 Click OK to complete driver installation. And then system will be reboot automatically after installing driver. After driver installation, please check Device Manager in the system. Above picture shown that Xecap driver is installed properly

25 10 APPLICATION SOFTWARE INSTALLAION. In order to install Xecap software in the system, insert provided CD Below window pop up on the screen Complete: Click it to install software fully including Main Server, CMS, Backup Viewer programs Main Server: Click ot just install it without CMS, Backup Viewer programs CMS: Central Monitoring System. Click to install for Multi-Access Main DVRs remotely. Click Complete to install NewDVR software completely

26 Click Next to continue Insert company or user s name then click Next to continue Click Next to continue

27 Click Install to continue Complete Installation

28 After installation, NewDVR shortcut icon will be generated on the screen. The Xecap Application will install M-JPEG and MPEG4 software codec on the system and user do not need to install any other files more. If user cannot see the icon above on the desktop, it means that the installation was not competed properly or user miss required files such a DirectX8.1 or newer version. If user have the same problem or the New DVR program is not run automatically. Please contact your supplier or Comart technical support for any assistance

29 11 SOFTWARE FUNCTION INTERGRATED SETUP PROGRAM XECAP-ND consists of 3 setup programs such as Central monitoring program, Setup Program for all remotes, Local setup for current server in use, and Remote setup for each remotes. 1. CENTRAL MONITORING PROGRAM SETUP: User can set up a remote connection with each remote computers which are installed with our DVR board, and user can monitor all the server in one program 2. LOCAL SETUP: Sets up a local server installed with our DVR board in current use. Setup for General / Camera/ Record/ Schedule/ Event 3. REMOTE SETUP: Sets up a remote which has our DVR board installed. Setup for General/ Camera/ Record/ Schedule/ Event [NOTE: Both LOCAL SETUP menu and REMOTE SETUP menu are the same] GUI and Display Multi-language input and display interface: Korean, English, Russian, Japanese Edition of display division mode: Max. 64CH display. Division mode in which the user editing is possible Easy location monitoring through collecting channel(s) for group monitoring in a drag-and-drop manner. [Index channel] Indicating channel list to the Index and displaying the desired channel (also known as logical channel) for monitoring on the screen after dividing as logical channel and physical camera. Logo support on OEM basis. Note: For user favor, Logo can be changed. In this case, user can t do themselves so forward the logo to Comart then we will put the logo for users. Local and Remote setup through pop-up menu. Displaying camera, recording status, and log-in/out information through log file. Showing motion detection area in the display image. One click setup for live/setup/searching/backup/pan-tilt preset/control/color control/group recording Channel number / motion detection / sensor detection / time display: location / font/ color control Display rotation function: Can set period(s) Display locking function: Can deactivate if needed Recording function during setup process Hidden camera function 2 units of TV OUT Support: 1. All-channel screen mode 2. Screen mode identical to the main screen Automatic re-booting support with watch-dog function in case of system failure Providing dual monitoring system

30 CAMERA Unlimited number of camera input within the network limitation Brightness / Contrast / Sharpness / Hue / Saturation control function for each camera Monitor resolution control for each camera (320x240, 704x240, and 704x480,) Recording Frame (Frame Per Second / Second Per Frame ) (e.g. save as 3 seconds per frame) Automatic frame allotment function for each channel Applying identical codec and resolution to all channels with just one click Various video standard support (NTSC/PAL) Camera signal loss (Video Loss) detection and alarm signal with input sensor detection Simultaneous recording on multiple number of cameras for each event Recording and Drive Max 16 channel support with voice (may vary depending on board type) Scheduling recording function (scheduling, repeat schedule of certain time period(s) on weekly / monthly /annual/once basis ) All-time recording / motion detection / sensor detection / audio detection / recording setup / recording time control of pre/post movement Economical usage of hard drive with event recording function and selected channel recording function. Unlimited upgrade of hard disk storage / Alarm function when hard disk is full MPEG4 / MJPEG recording mode selection Recording quality control function (bit rate / key frame interval / frame number per second, and etc) Searching and Backup Multi-channel searching function in a simultaneous manner (Screen division mode identical to the mainscreen) / Division mode being specifically edited by the user Time-graph searching function on calendar and time period basis (hour / minute / second ) Smart searching (All time / motion detection / sensor / audio detection recording). Simultaneous searching support Support for One Frame (Pre / Post), Recording (Start / End), Move (Unit) function. Recording setup modification during search process / Live-mode support during search process Still Image USB / Save to Floppy drive and print function (BMP) Watermarking function Support for backup process by hour / channel and support for various media for backup process (CD, USB, HDD) Bookmark function to save specific time and channel for user convenient.(refer to page 83) Zoom in & Out while search video data. Panorama function up to 100 divisions display each frame

31 Network and Authorization Maximum client number for network connection / Limitation function for connected port(s) Various authorization setup process for multi-level user, as well as remote setup process Hidden camera and authorization limit function for each group TCP/UDP Video / audio streaming function based on MPEG4 Remote Setup Process Searching for recorded data from remote site(s) and saving function (recorded from remote) Identical display screen for both local server and remote

32 12 STARTINHG ND Once the installation has been completed, as user run the program below window will show up its initializing. Choose screen format either NTSC or PAL depends on the areas. Select a HDD to save video data

33 Adjust the capacity of selected HDD. This is the first step to operate system. NOTE If the software is not operated properly, run ND clear. It will clear all the previous information. If there is DVR setup information or update. Running ND clear is recommended that terminate all the old information

34 13 MAIN PROGRAM There is shortcut icon on the desktop after installation. Click the Icon Then above window will appear on the screen it contains version/ driver information. NOTE: the initial ID/PASSWORD is super/super

35 14 MAIN APPLICATION CENLENDE SHORTCUT Once user run the program, above application will show up on the screen. The UI is designed for user-friendly. Therefore, user can operate the application with ease

36 15 LAY OUT INFORMATION COMPANY LOGO LIVE/ SEARCH SETUP/ BACKUP RECORD/ PTZ LOG IN/ USER INFORMATION WINDOW VIDEO COMPOSITE PANORAMA POWER DATE/ TIME CAMERA DISPLAY DISPLAY AUDIO & SENSOR

37 FULL SCREEN MODE CONTROL BAR FULL SCREEN Click full screen button, then as shown above screen will be displayed. There is control bar which include convenient functions on the bottom of the screen that user can change video division mode, lock the screen, flick different channels and auto switch is possible. If user click lock button, the screen will be locked. Therefore, to operate the application, user has to put password

38 Then user can access all the application again. The function is designed for security reasons. The default ID/PASSWORD is super/super

39 ND software provides drag and drop to exchange channels. Simply drag the channel with mouse where user wants to put. CHANNEL GROUPING User can organize relative channels by dragging and dropping the channel to the section. Please click the channel which user wish to assemble channel range. Grip the channel on the bar and drag it to where user wishes to move

40 PTZ & LOG INFORMATION CLICK THE BUTTON TO HIDE WINDOW To use PTZ, click SCREEN DISPLAY Display live screen while using Pan Tilt Zoom CONTROL STICK Select a channel to implement PTZ

41 16 APPLICATION SETUP Before user start a program, please Click environment. icon on the main application. It will lead user to setup general system There is general system information and driver version is being displayed on the Application Setup

42 16.1 LOGIN SETUP User is able to set up start and end operation. There are four options displayed on the logon setup. 1. Auto log in 2. Setup Auto Login 3. Activate LOGIN window shot down 4. Lock button on start Simply, click the blank box to select the option

43 16.2 OSD SETTING OSD stand for On Screen Display basically, user can display camera number, location, record status, time stamp and able to change color of OSD. Therefore, user can easily recognize that information in one sight. Continuous Recording Motion Detection Recording Manual Recording Audio Recording TV OUT

44 16.3 MONITOR SETTING In monitor section, user organizes monitor functions such a type of VGA, screen division at start up application. If user s VGA can support PCI express, then click the option, otherwise, there may be display error on the screen. Select division mode of screen as application start up Technically, ND software provides dual monitor function. Therefore, display two different type of screen mode is possible through ND software. In order to use this function, user PC should meet the necessary requirement such a CPU etc

45 16.4 OTHER OPTION While recording, user can capture a frame and save it in a folder. In other function mode, user can indicate folder to save capture data and printer to print out the capture. Browse Folder Select a folder to save capture data

46 ND software provides 4 languages. If user changes the language, restart the program because it will not apply to main system straight right. Moreover, ND software allows users to modify all texts used in the software as they want to see. All text files are in a directory named Localization' and modifiable before the program installation. And any special language can be also added and listed in the ND. For example, copy a 'English' folder and name it according to 'Readme' file guides you. (ex. Spanish) Then, change all the texts in Spanish. In the Language list, you will find Spanish' when you run the application. Place translated Language

47 16.5 SYSTEM In system mode, there are watch dog and network setup. If user clicks the blank box below information will appear on the screen its current system information. Display current PC status CPU & MEMORY

48 16.6 Watch Dog Function Firstly, watch dog option it s when error or other unexpected error occurs in the system. WatchDog function will restart or renew the system automatically to prevent from serious matter and protect system. For example, if user click blank box to enable Watch Dog then set the time 1 minute, afterward, if sudden error interfere in a system for certain period, then the system will be restarted automatically

49 16.7 NETWORK To connect through client program, user ought to put right information such a URL. Then it will be connected by remote program it s CMS. It will be illustrated later on the CMS setup

50 16.8 PERMISSION Select permission options not to allow others In permission mode, ND provides different options and authority to other users and can restrict specific functions with user s level. For instance, main administrator can create a new user and allow them to use limited functions in the system. It is designed for user friendly. Therefore, user can deal with setup menu with ease. To create a new user, click ADD on the permission section. Then message will be pop up on the screen then put the necessary information with description of users. In order to control the permission, simply choose the options in authorized list then click to Not Authorized

51 There is account option that user can set other options its Change password on the next Login Unchangeable Password Account Expiration Disable the ID User can give each option to individual users with different terms. Moreover, there is camera permission that if main admin allow other users to watch limited number of cameras, others can see only permitted camera number. So user can determine which cameras to be hidden and shown for each user

52 16.9 CAMERA The general information of camera mode is that user can select output sensor, camera location, and camera capture frame. There is general configuration of Camera information and selectable video type option. In this mode, user can select output sensor, camera location and camera capture frame information

53 Firstly, to activate each cameras, click Use Camera then user put the camera location name in the box and choose camera capture frame. In case of camera loss or cable failure so on, user should set the alarm out function. Then it will notice to user if there is trouble with camera connection or cable problem. However, the alarm is activated for certain period of time. NOTE: Click Enable Camera first otherwise, display

54 Individual camera setting CAMERA LOCATION COLOR ADJUST Brightness: the state or quality of the video image being bright from the selected camera Contrast: The difference in brightness between the light and dark areas of the selected video image. Sharpness: Having clear form and detail of the video image in the menu. Hue: A degree of lightness, darkness and strength of video color. Saturation: The degree of color difference in the video image from a gray of the same lightness or brightness. In addition, if user makes a mistake or return to default value, simply click DEFAULT. Once user set up the value of specific number of camera then it is possible to apply same value by clicking

55 16.10 COLOR User can check and control all the channels easily in the color section

56 16.11 PTZ As shown below, individual PTZ can be organized. Setting protocol, pen tilt speed of each camera and conduct a test should be checked. Initially, protocol ought to be set then user can conduct a pan tilt test in different way by using different speed. Also user should select Baud Rate (communication speed) of the computer port COMPORT from each Camera address. NOTE: to operate PTZ, user must have camera which provide that function

57 16.12 RECORDING In the recording mode, the configuration display camera information such a codec, frame rate and resolution. Whereas, user can set the compressed codec either MJPEC or MPEG4, audio channel, resolution size, recording name, event frame(unit frame and unit time), image quality and recording frame(frame per second and second frame per frame) of each camera as follow; Audio Channel Codec Event Frame Resolution

58 Resolution: ND provides 3 different type of resolution 352X240, 702X240 and 704X480 of each camera Codec: User can select either MPEG$ or MJPEG as a video quality. 1. MJPEG codec is often used as storage format for large files to display with good quality. 2. MPEG4 codec have smaller file size with comparatively lower quality. Audio Channel: user can select audio channel for each camera Image Quality: User can set the video image quality of each camera by using mouse in the menu. It is recommended that set the quality level between 20 and 30 as optimize video quality. Event frame: User can set an event frame for certain period of time when the event occurs. It can be possible to playback and rewind to specific time. Once user set up all the necessary option, click Apply same value to all channel: then all the channels have a same value

59 16.13 AUDIO Demonstrate Audio information. In this mode, user can test the audio channel of the selected camera. As shown below picture, the decibel level (e.g. +96, ,-32,-64,-96) change as the volume level of selected audio level varies during the audio test. To give clear information, the sampling rate of each audio represents ample frequency of the audio accordingly. AUDIO TEST

60 16.14 DRIVE User can figure out the status of each drive, and the alarm will be activated by each sensor if the hard driver is full in the end. The general information will be displayed on Driver mode. As picture shown above, user can control the capacity of HDD space

61 16.15 SCHEDULE Recording User can set camera recording and the period of time for each schedule and set each camera with different schedule. It provides detection functions for each schedules for instance, continuous record, motion detection, audio detection and sensor detection. : Perform continuous recording. : Perform motion detection. : Perform audio detection. : Perform sensor detection. The procedure of setting schedule. Firstly, write down schedule name on the white blank then select a camera user want to organize. Afterward, if see the schedule box it s designed timely with date. Choose detection functions among options then click on the schedule box with mouse. If user click ALL on the box, it will appoint all the date and time

62 Once setting is over, user ought to press to save it. Then below icon will be generated. Even if the setting is done, user can modify the setting information

63 16.16 SYSTEM INFORMATION User can appoint either the system reboot or system shutdown with scheduled time. There are four options Once Everyday Every Week Every Month

64 16.17 EVENT It will display general information of sensitivity of motion detection with individual camera. Moreover, user can adjust the motion sensitivity

65 16.18 Motion Detection Basically, user can decide to select area on the screen of Motion Detection will be caught. If user click the icon, below window appear on the screen. CHOOSE SHAPE SELECT ZONE SENSITIVITY LEVEL In this mode, user can set up sensitivity and type of indication mark and MD zone

66 In order to test MD function, select entire or specific zone then click the button MD TEST SPECIFIC ZONE ENTIRE ZONE Above picture is compare with specific zone MD and entire zone. With specific zone function, user is able to classify important areas and easily recognize which area is occupied. Furthermore, user can enable/disable the night motion detection function. Simply, activate Enable Night Motion. The sensitivity level is from 0 to 100. The higher value indicates the higher sensitivity level of the night motion function during the scheduled time. Connection Individual camera can be connected to each sensor. For instance, if number 1 camera connects into sensor 1&2 it checks movements, then recording will be conducted for selected period if motion is detected in the zone of camera

67 16.19 AUDIO DETECTION In the audio detection mode, user can conduct audio test of each audio channel. Firstly, it will display current location of where audio is installed. TEST AUDIO LOCATION To test the audio, click TEST button. User may recognize where the camera is and the decibel level during the test

68 16.20 Connection CAMERA NUMBER SENSOR NUMBER Above picture illustrates both camera output and sensor output of the selected audio channel for the audio setup. Once the setup is completed, go to main application then press right button of mouse on the specific channel, below message will pop up on the screen Then choose one of recording options. Afterward, audio recording will be operated if there is audio detection in selected channel. Then the camera will send out audio detection signals to selected sensor

69 16.21 SENSOR INPUT The below picture illustrates the camera output and sensor out put of the selected sensor channel for the sensor setup. For instance, if user sets certain time on sensor 2 with camera 3 which is being connected with sensor channel 2, the camera will send out sensor detection signals to sensor 2 then alarm is on for certain period consequently. It will display basic information such a sensor location and signal time

70 16.22 ALARM OUTPUT It demonstrates sensor information; location and output time. User can find out the location of each sensor channel for the alarm output with ease. And can perform a sensor testing on the selected sensor channel to check with the each connected camera, audio and sensor for the possibility of system failure

71 16.23 CONNECTION If user goes to Connection Mode, all the setup will be displayed on the screen. For example, if user set the motion and audio detection on each setup mode. Then go to output mode then user can recognize which sensors connect into which cameras or audios. In other word, user can set the menu with either way that setting individually or setting in output mode

72 17 SEARCH Click this button on the main application or click the colored date on the main screen which means there is video data on that day. It will lead to search mode automatically. Basically, user can search recorded data based on date and time. If there is recorded video data in the HDD, certain date will be indicated with color like above on the calendar. DATE SEARCH: Search recorded image by date. If image data is saved in HDD, the date will be indicated with color circle. Click the date then all the video record data which was recorded on that day will be displayed on the schedule square. There is recorded data on 28th

73 In search mode, ND provides different functions for users such a export, panorama play, digital zoom function and speed play so on. Therefore, the integration of functions is versatile. User can control the playback with below control bar <CONTROL BAR> <ZOOM> <BOOK MARK> <FLICK THE FRAMES> <PLAY SPEED> Video data can be sorted by continue, motion, sensor and audio. Each icon will demonstrate right video data. For instance, if user clicks audio, audio data will be displayed straightaway. There should be different record data with different format. This function will help user to find out right data in short. DIVISION MODE FLICK A CHANNEL PANORAMA

74 17.1 EXPORT AS user look through the search mode and want to take out particular channel. Simply choose a channel and click EXPORT This is export mode as user clicks the button. It will pop up on the screen. In export, user can put Watermark Time Stamp EVENT CAMEAPOSITION This prevents capture shot from being forged. If user clicks EVENT, it will display the record mode on the screen. It will display camera location

75 It will display current time on the screen. CAMERA LOCATION EVENT / WATERMARK COLOR ADJUST CHANNEL NUMBER TIME STAMP To save the images, click to save the image file. The image will be saved as BMP format. User saves the image in specific folder

76 To print out the images, click then connected print will print off the images ZOOM In search mode, ND provides digital zoom function to enlarge the frames. While user play the recorded data and want to see clearly. Simply pause then click button on the control bar. As shown above, when user click zoom button, it displays original size of data with zoom control window. To run zoom function, Use above button to zoom in/out

77 ZOOM IN SCREEN Can be moved with mouse Zoom in screen is being displayed. Green box is being zoomed on the screen

78 17.3 PANORAMA PANORAMA BUTTON ND provides panorama function in order to check the happening clearly in order. While user play video data and want to figure out a process. Press pause then click

79 Full screen of panorama. In pause state, if user clicks the button, user can check individual frame by clicking

80 Capture Order One of the significant functions is while the panorama is on progress, capture the panorama screen is possible. To capture the panorama screen, please press pause button then click the Export then above picture is on. if user press the button, the capture number will be on the screen which is capture order, as shown above picture. Therefore, user can recognize which one is first and last frame easily

81 17.4 BOOKMARK FUNCTION As user search video data from massive channels, bookmark function help user to remember specific time with channel number. After insert bookmark on certain time and channel, user keeps searching the video files and easily back to bookmarked data. BOOKMARK BUTTON While seeking video data, bookmark is needed then presses that button. It will save the time and channels. To play the channel, double click the name on the list Click the button Then list window will pop up on the screen SAVED TIME AND CHANNEEL

82 17.5 CELL EDITOR There is cell editor to design the cell mode and display up to 100 composites on the screen. Press the hammer icon then cell editor mode will be run. To create a new mode, press EDIT Choose Lines Horizon and Vertical. Up to 10 /10 (Horizon/Vertical) can be created. For example, if user choose 10/10, 100 squares will be created

83 In cell editor mode, it is easy to make shape of cells. Simply drag with mouse Afterward, to add in the main menu, drag the cell mode to main option list with mouse. Then go back to main application. Add the edited cell to default mode

84 100 cell mode This is example of 100 mode cell with panorama which means if there is happen; user or inspector is able to analyze exactly how to it happens

85 18 BACKUP MODE In order to backup video data in search mode, press Backup button on the menu. BACKUP STEP 1 Select a menu and time among the list on the window. Then choose the cameras which user wants to backup from. For instance, if user wants to record Camera 1,2,7,8 then take out rest of them from the list. Then press NEXT

86 STEP 2 Choose Storage Format either NE format or AVI. If user prepare to encrypt the data for privacy protection, click the USE PASSWROD Then only it can be opened by input password on Backup Viewer. Moreover, after backup the original data can be deleted by choosing the option USE DELETE AFTER BACKUP Then choose backup folder Select a folder which save the backup data in the PC

87 Once user complete the progress, above message will pop up on the screen that during the backup, all the recording process would be halted. STEP 3 BACKUP PROCESSING

88 STEP 4 It mentions that backup process is completed successfully

89 19 BACKUP VIEWER After backup processing, user is able to check the data with BACKUP VIEWER program. Menu option MAIN SCREEN The main screen is similar with server screen. Therefore, user can easily deal with using the program. FOLDER BROWSE To setup the display module, click

90 We recommend that user should consider VGA Card and select suitable option. And if the VGA Card support PCI Express, click the option otherwise, video data cannot be displayed on the screen. Furthermore, H/W live display such a XED can be displayed with overlay system. Therefore, to display live screen, overlay system can be supported. OPEN DATA FOLDER To open the backup data, click Find out the folder as user backup the data

91 If user encrypt the backup data on the backup process, then below screen appear. User must insert password otherwise, will not be able to open the data

92 20 CMS (Control Monitoring System) ND software provides CMS its Control Monitoring System. Literally, user can access to main server from any where through network available, the limited client number is 250. The remarkable function of CMS is it contains all functions which are used in the main application also the design and layout is completely same with main application. Therefore, user can use the system with ease. Moreover, CMS support function that user setup the main system program from away via CMS. Also simultaneously, recording and search from main server and CMS. MAIN FUNCTIONS LIVE DISPLAY FROM MAIN SERVER RECORDING SEARCH CMS and MAIN SERVER CONTROL MAIN APPLICATION SETUP FROM CMS UP TO 250 USERS CAN ACCESS BACKUP DATA In order to run the CMS, click the icon on the desktop. No connection data If user runs the program for the first time, there is no data screen because setup has been completed. Therefore, to connect to main server, set the information window

93 <Main CMS Screen> The layout is completely same with main application. To connect into the main server, user should organize network setup. Click setup to set network information

94 <APPLICATION SETUP> To create server, click ADD Click the flat button to choose type of connection IP or DDNS Put the all required information to connect to server. There is either way connect to server through IP address or DDNS

95 DDNS Insert URL address, to get the information, register domain name through Moreover, to use DDNS server, user should enable the DDNS on the main application. Enable the option and insert ID/PASSWORD Its DDNS register ID/PASSWORD

96 <MAIN APPLICATION SETUP MODE> NOTE: Refer to the register procedure to get the address. SERVER LIST INFORMATION Once user adds a new server name, it will display the information on the screen. Then click CONNECT Connection Successful Message

97 SERVER INFORMATION Once setup is completed, when user runs the CMS program again next time, it will connect automatically. To display video screen, user have select a camera from the list. Go to camera section. CAMERA LIST ON THE MAIN SERVER

98 Select a camera from the list to supervise through CMS User is able to select a specific camera from the list to supervise present situation on main application. NOTE: Once user connects to server, please select a camera otherwise; it will not display the channels on the screen

99 20.1 SYSTEM SETUP Like main application setup, user can set the login information, OSD, Monitor etc. For more information, please refer to above setup section at beginning. HDD Generally, it shows the capacity of connected HDD and user can adjust the remaining spaces

100 If user select a specific HDD, it provides information that user can recognize how much spaces are used and left to be saved. CMS MAIN DISPLAY SCREEN Display selected cameras on the screen. It shows the current status of main server with OSD its recording type, time and camera number or location, thereby user can see exact main application status

101 Recording Status Main server current status. If someone access to the main server, server show the information who connect into main server There is a list of who access to main server from away with CMS <MAIN SERVER SCREEN>

102 Up to 250 users are able to access to the main server via CMS To cut off the user, simply choose a user then click the disconnection button User can prohibit others connecting server

103 <16 channel live motion> Video Division mode Cell editor Panorama Function Full Screen Mode FULL SCREEN MODE

104 Drag & Drop Function User easily can exchange the channels, simply grip the channel with mouse and drag it to the place. Above picture exemplify process of drag & drop

105 20.2 RECORDING In CMS mode, user can record live display. Click right button of mouse on the screen, then above sub-window will appear. User can select a option that there are ALL CHANNEL RECORD RECORD SELECT CHANNEL FULL SCREEN SETUP APPLICATION To record all channels, choose ALL CHANNEL RECORD on the screen. It will record all the channels

106 R indicate RECORDING In CMS <ALL CHANNEL RECORDING> In order to record individual channel, move mouse to the channel then record selected channels on the menu

107 20.3 SEARCH MODE User can search video data both main server and CMS. It specifics that there is video data on that day. If there is video data on specific day, it will display the date with color number on the calendar. Click the data with mouse, it will lead user to search mode.] NOTE: User should be aware of that the date will be colored as long as there is video data recording in CMS

108 It demonstrates there is video data during the period as shown diagram. CMS supports all the functions of main application especially search mode thereby user can control the system with ease,

109 SEARCH 2 As it mentioned above, user can search video data both system main server and CMS. To surf the main application, press right button of the mouse on the screen. See below; These relate to controlling main application. User can search video data, control PTZ and adjust setup information. Moreover, user can commend to record the main server. For instance, if urgent matter occur on the channel and does not record due to the type of record, user can change the recording type for special occasion

110 21 CMS PTZ User can conduct Pen Tile Zoom function via CMS. Step 1 To conduct PTZ on CMS, user should set the value of PTZ cameras in the main server as shown above. Step 2 <CMS Main Screen>

111 Once the setups is done, operate CMS and as it is shown above, there is PTZ option on the menu. PTZ Control Box As it is shown above, user can control PTZ function through CMS

112 22 DDNS DDNS stand for dynamic DNS. It is system which allows the domain name data held in a name server to be updated in real time. The most common use for this is in allowing an Internet Domain name to be assigned to a computer with varying IP address. This makes it possible for other sites on the Internet to establish connections to machine or main server such a ND connection via CMS without needing to track the IP address. Therefore, domain name is required to be connected. There is DNS hosting service that runs Domain Name system servers. There are free hosting service exist. We also operate DDNS hosting service its free registration. Go to then follow the instruction. Instruction of registering CCTVDDNS If user visit the website, below screen will be shown. If user does not have ID/PWD, register is required

113 Fill out the form on the screen If user complete form and press REGISTER, above message will pop up on the screen After register CCTVDDNS, wait until the account will be approved. DOMAIN NAME

114 Insert URL address on the setup window. NOTE: To connect to server via DDNS. The first step is register in DDNS site to get domain name. Then enable the DDNS option on the main server and set server information on CMS

115 23 WATER MARK FUNCTION If user insert water mark on the specific frame for particular purpose such submitting to police for investigation, to check the frame whether it is forged or not, running water mark viewer. WATER SYMBOL MARK User is able to insert water mark in search mode. If there is vital frame during searching, press EXPORT then click WATER MARK. There is water mark as above screen on the capture screen. Save the file. Select a folder to save the picture

116 To check the file, run water mark viewer on the [START MENU] Screen Layout Tool Bar <Main Screen Water Mark Viewer> File Browser Water View Image Image File List Preview Zoon In/Out Bar In order to open the water viewed file, go to saved file folder then the file will be displayed on the Image file list on the main screen automatically

117 <Zoom In/Out Function> To check whether the image file is forged or modified for particular reason, click then If there is no area forged then message come up on the screen that there is no area falsified

118 Detect falsified area Or if there is area falsified, it detects and indicates with noticeable color then user can recognize which area of file is damaged by force. Water Mark function is designed to prevent the images from being falsified for particular reasons

119 24 UNINSTALLATION & UPDATE NEW SOFTWARE To remove the program, firstly run ND clear. Choose one of option among the list. All information: to delete software fully included setup information, Recorded data and system log. Setup information: to delete all setting value only Recorded Data: to remove all recorded data only System Log: to remove all system log texts crested