Quad QSA 30 Series. High Performance Assemblers. The system that's always more than the sum of its parts. .~!!'. Corporation
|
|
- Pierce Newman
- 5 years ago
- Views:
Transcription
1 Quad QSA 30 Series High Performance Assemblers The system that's always more than the sum of its parts..~!!'. Corporation
2 Excellence Introduction to the QSA- 30 Series Electronics manufacturers face the challenge of consistently producing more complex boards at lower and lower costs. Quad QSA-30 Series Assemblers help manufacturers meet the challenge by providing the best of chip shooter economy and the industry's leading fine pitch component placement capabilities on asingle affordable platform..1. The QSA-30 Series consists of two CE-certified models; the QSA-30ATMand the QSA-30VTM.The QSA-30A utilizes Quad's proprietary QuadAlign in-process alignment technology to achieve high yield chip placement as well as placing IC components at high production speeds. The QSA-30V incorporates an upward vision camera that expands the component range to include ultra-fine pitch QFPs, in addition to full BGA ball inspection. Quad's complete range of component feeders is available to allow manufacturers to meet their changing requirements. These feeders are compatible with the full range of Quad placement systems. A small footprint and full SMEMA compatibility make a QSA-30 Series model or combination the perfect choice for a new or upgraded assembly line. T QSA- 30 Series Benefits The QSA-30 Series Assemblers combine world-class chip shooter economy with IC placer flexibility. Patented QuadAlign in-process alignment technology is integrated with a field-proven three-spindle placement system. The result is an assembly system that manufacturers count on to place chips and ICs at placement rates up to 13,300 CPH. The QSA-30V model comes standard with, and the QSA-30A model is upgradeable in the field to include an upward vision system. The upward vision system expands the component processing range to include 20, 15 and 12 mil lead pitch components, enhances placement accuracy and enables full BGA ball inspection. QSA-30 Series three-spindle placement system The SMEMA-compatible QSA-30 Series models can be integrated with Quad stencil printers and solder reflow ovens to create QuadLine systems that ensure high process compatibility and maximum throughput.
3 Specifications I QSA 30A QSA 30V Board Size Conveyor Direction. Maximum: 450 x 400 x 4.0 mm ( x x inch).. Minimum: 50 x 50 x 0.5 mm (1.968 x x inch).. left to right, right to left. Alignment Unit QuadAlign QuadAlign; Upward Vision Component Range QuadAlign Maximum Size Minimum Size Stand-off Vision Model 35 standard or Model 45* Throughput Chips Tact time (max placement rate) Placement 3 sigma. QFPs Tact time (max placement rate) Placement 3 sigma. Component Feeders Tape Feeders Other Feeder Types Feeder Capacity Facility Requirements Power Clean Dry Air Pressure Maximum flow Overall Dimensions Weight Shipping Net 32 mm (1.259 inch) Square mm (0.025 inch) Pitch (0402). >0.25 mm (>0.010 inch) No minimum Field Upgrade Option available Field Upgrade Option available sec/chip (13,300 cph).. ±0.10 mm (± inch). 32 mm (1.259 inch) Square 0.3 mm (0.012 inch) Pitch 42 mm (1.654 inch) Square 0.5 mm (0.020 inch) Pitch SOP, BGA, Connector, etc sec/qfp with QuadAlign (4,200 cph) sec/qfp with Vision (2,700).. ±0.05 mm (± inch) with QuadAlign.. ±0.04 mm (± inch) with Vision.. 8mm, 12mm, 16mm, 24mm, 32mm, 44mm, 56mm.. Stacking Tube Feeder.. Multi-lane Belt Feeder.. Vibratory Feeder.. Latching JEDEC Tray Holders.. 20 Level Automatic Tray Handler mm Tape Feeders.. 100, 120, 208, 220, 230 and 240 VAC ± 10%.. Single Phase.. 50/60 Hz kva (max) BAR ( PSI)..1501/m (5 SCFM)... Width 1660, Depth 1540, Height 1895 mm.. (Width , Depth , Height inch). Approx. 1,130kg (2,490Ibs). Approx. 1,020kg (2,250Ibs). 'Customer may substitute Model 45 vision system at no additional charge. I
4 Options 8, 12, 16, 24, 32, 44, 56mm Electronic Tape Feeders Latching JEDEC Tray Holders 20-Level Automatic Tray Handler Vibratory Tube Feeder Stacking Tube Feeder Docking Feeder Cart Multi-lane Belt Feeders Model 35 & 45 Upward Vision Field Upgrade Kit for QSA-30A Bulk Cassette Feeders 1.
5 Options 8, 12, 16, 24, 32, 44, 56mm Electronic Tape Feeders Latching JEDEC Tray Holders 20-Level Automatic Tray Handler Vibratory Tube Feeder Stacking Tube Feeder Docking Feeder Cart Multi-lane Belt Feeders Model 35 & 45 Upward Vision Field Upgrade Kit for QSA-30A Bulk Cassette Feeders 1.
6 Features Head Single gantry, triple pickup design with 0.27 sec/ chip tact time provides placement rates up to 13,300 CPH Patented QuadAlign in-process touchless centering of components ranging from 0402 chips through QFP160s Three-head simultaneous component pickup and individual component placement Fiducial correction and reject mark detection Light source and lens module High speed/high accuracy calibration Patented QuadAlign centering system Platform Handles boards from 2" x 2" to 16" x 18" AC Servo motor drive on X, Y and Z axes for high speed and high accuracy performance QSA-30V platform with nozzle changer, feeders and vision system Synchronized drive shaft to ensure high positional accuracy Tape feeder system accommodates up to 76-8mm tape feeders Standard 10-pocket automatic nozzle changer Standard fixed feeder bases with floating feeder sensors Operating System Easy-to-use Windows 95 user interface Programmable board transport flor-~",""t-!ioo 1m: I"'. "0--[ -~. -, -. 1':8I0<:Io-1 -. ~_. -_.,.--_-, ~.. ~'" ~ ~,, Standard placement and sequence optimizer Standard direct board layout download most CAD systems from Off-line programming capability 1~1IIS liiicka-. _ -w.
7 Quad Service and Support Quad Systems Corporation is a leading manufacturer of flexible, high-performance surface mount technology (SMT) and advanced packaging assembly systems. Quad provides support, process expertise and a complete range of equipment, including assemblers, stencil printers and convection reflow ovens. Quad assists companies around the world with resourses to plan and implement comprehensive assembly solutions that enhance operating efficiency and productivity. QuadCare Quad Systems offers a wide variety of maintenance and technical support programs. These QuadCare support programs are available for all Quad screen printers, assemblers, and convection reflow ovens, and are designed to meet any production needs or budget criteria. QuadCare support programs are designed to keep maintenance and repair costs at a low, predictable level while ensuring excellent performance year after year. '!\' Training Training courses for operators, service engineers, and production managers are available at our corporate headquarters in Willow Grove, Pennsylvania and at our wholly-owned subsidiary, Quad Europe, Ltd. Quad Systems Corporation 2405 Maryland Road Willow Grove, PA Fax sales@quad-sys.com Quad Europe, Ltd 6 Century Point, Halifax Road High Wycombe Buckinghamshire HP123SL England +44 (0) Fax +44 (0) /98 Quad Systems Corporation. All specifications are subject to change without notice. The Quad logo is a registered trademark of Quad Systems Corporation. Windows 95 is a registered trademark of Microsoft Corporation. QSA-30,QSA 30A, QSA-30V. QuadAlign, QuadLine and QuadCare are trademarks of Quad Systems Corporation.
A remarkable and economical Pick & Place machine intended for small batches & SMT prototype projects.
FULLY AUTOMATED TABLETOP PICK & PLACE MACHINE Features and Benefits Teledyne DALSA Vision System Two Heads for pick up Static Fixture max size 14"(355mm) 12"(304mm) capable of holding one JEDEC Tray once
More informationQM3000. A remarkable and economical Pick & Place machine intended for small to medium batches & SMT prototype projects.
FULLY AUTOMATED PICK& PLACE MACHINE Features and Benefits Teledyne DALSA Vision System Dual Head for pick up (3 rd head optional) A remarkable and economical Pick & Place machine intended for small to
More informationPLACEMENT SOLUTION RX-6 SERIES. High-Speed Compact Modular Mounter
PLACEMENT SOLUTION RX-6 SERIES High-Speed Compact Modular Mounter RX-6 BASIC FEATURES RX-6 SERIES High-Speed Compact Modular Mounter RX-6 is the perfect solution for high-mix / mid-volume productions with
More informationOptima Plus Line Solutions. Limited Time Offer Valid through July 31, 2004
Optima Plus Line Solutions Limited Time Offer Valid through July 31, 2004 Optima Plus Line Solutions High-end performance...... entry-level price 031504 optima plus limited time offer 2 F F Special Offer
More informationPLACEMENT SOLUTION KE-3020 SERIES KE-3010 SERIES. High-Speed Chip Shooter. High-Speed Flexible Mounter
PLACEMENT SOLUTION KE-3010 SERIES High-Speed Chip Shooter KE-3020 SERIES High-Speed Flexible Mounter HIGH-SPEED FLEXIBLE MOUNTER MEETING VARIOUS EXPECTATIONS From ultra-small components to odd-shaped components
More informationSeries. Specifications. Standard of Mid-class
Standard of Mid-class Specifications Series Model Name Alignment + Fix Camera (Option) + Fix Camera + Fix Camera Standard of Mid-class Number of Spindles 10 Spindes x 2 Gantry 10 Spindes x 1 Gantry 6 Spindes
More informationAM100. Your scalable, cost-effective solution for high mix and new product introduction
AM100 Your scalable, cost-effective solution for high mix and new product introduction Especially suited for high mix and NPI environments Machine layout and supply options Rear left and rear right Fixed
More informationGenesis Platform Solutions. The flexibility you want. The performance you need.
Genesis Platform Solutions The flexibility you want. The performance you need. redefine productivity with Genesis Platform solutions Genesis will energize your high-performance assembly in any production
More informationMC SERIES. Flexible & Precise Automatic SMT Pick and Place Machines. The SMT Source Since Stencil Printer. Pick & Place Machine FOR COMPONENTS :
Stencil Printer Pick & Place Machine MC1300 MC1400 MC384 MC385 MC387 MC391 MC684 The SMT Source Since 1980 MC SERIES Flexible & Precise Automatic SMT Pick and Place Machines FOR COMPONENTS : 0201 0402
More informationX-Series for fast-changing applications Cost-effective Pick & Place for high-mix, small batches
X-Series for fast-changing applications Cost-effective Pick & Place for high-mix, small batches The fastest way from CAD data to first products Lean manufacturing benefits from fast ramp-up of new applications.
More informationGreaterversatility, unparalleled accuracy increased efficiency. NPM-X Series. next-generation platform
Greaterversatility, versatility, Greater unparalleled accuracy accuracy unparalleled andincreased increased efficiency efficiency and NPM-X NPM-X Series Series The for Thenext-generation next-generation
More informationONYX 32 MULTIFUNCTIONAL POSITIONING AND SOLDERING SYSTEM
ONYX MULTIFUNCTIONAL POSITIONING AND SOLDERING SYSTEM MACHINES.0 APPLICATION: SMT ZEVAC-LINE: ONYX The complete ONYX product line documentation is composed of the following data sheets: MACHINES.0 ACCESSORIES.0,.0
More informationKE-1070/2070 KE-1080/2080
Specifications Item Model KE-2070M / KE-2070L / KE-2070E KE-2080M / KE-2080L / KE-2080E Board size Component height Component size Placement speed Placement accuracy Feeder inputs Power supply Apparent
More informationACCURACY, SPEED, RELIABILITY. Turnkey Production for: MEMS. Multi-Chip Modules. Semiconductor Packaging. Microwave Modules.
>> Turnkey Production for: MEMS Multi-Chip Modules Semiconductor Packaging Microwave Modules Flip Chip Photonics Packaging ACCURACY, SPEED, RELIABILITY ULTRA-PRECISION ASSEMBLY WORK CELL Turnkey production
More informationESE US-X SCREEN PRINTER LEADING EDGE AND ADVANCED TECHNOLOGY PRINTER HIGH SPEEDY, STABLY AND RELIABLE PRINTER
ESE US-X SCREEN PRINTER LEADING EDGE AND ADVANCED TECHNOLOGY PRINTER HIGH SPEEDY, STABLY AND RELIABLE PRINTER ESE US-X Printer Model US-2000X US-2000XQ US-7000X US-2000DX US-2000DX7 US-2000DX1 US-8500X
More informationHIGHLY FLEXIBLE SMD PLACEMENT SYSTEM FOR SMALL AND MEDIUM ENTERPRISES
HIGHLY FLEXIBLE SMD PLACEMENT SYSTEM FOR SMALL AND MEDIUM ENTERPRISES Highly flexible SMT placement machine for your production Placement speed: 4 500 cph * Component range: 0201 to 45x45 mm Intelligent
More informationPLACEMENT SOLUTION KE-3010 SERIES KE-3020 SERIES RX-7 SERIES JX-350 SERIES RS-1 SERIES JM-20 SERIES
KE-3010 SERIES KE-3020 SERIES RX-6 SERIES FX-3 SERIES RX-7 SERIES JX-350 SERIES RS-1 SERIES JM-20 SERIES PORTFOLIO highest reliability - broad component range - best price versus performance ratio - mechanical
More informationat surface mount speeds
www.uic.com email: universal@uic.com AMERICAS Tel. 1-800-432-2607 or Tel. +1-607-779-7522 CHINA, SHENZHEN Tel. +86-755-2685-9108 CHINA, SHANGHAI Tel. +86-21-6495-2100 EUROPE Tel. +421-2-4930-96-60 2017
More informationREWORK TECHNIC PC.
Rework Technic pc MARTIN Expert 10.6 Rework for SMT Components REWORK TECHNIC PC www.martin-smt.de Rework Excellence Clear and functional the standard set by MARTIN. With the intuitive and precise functions
More informationFully Automatic Screen Printer H450(ON-LINE SYSTEM)
Fully Automatic Screen Printer Flexible Auto Clamp system. Very stable machined cast structure. Auto conveyor width adjustment. Adjustable width/thickness for stencil frames. User friendly, Windows 7 OS,
More informationMulti-Ways Rework Station MS9000SE
Multi-Ways Rework Station MS9000SE Air & IR heating are Possible Flat Package & Chip Components are Possible (2x2 to 50x50 & 01005(0402) to 0805(2021) All-Reworking Processes is Possible (Removing-Cleaning-Printing-Replacing-Soldering)
More informationAutomated Sl Selective Laser Assembly System
Automated Sl Selective Laser Assembly System Ray Prasad Ray Prasad Consultancy Group President, BeamWorks Inc (2000-2006) Spark 400 Note: BeamWorks Ltd, an Israeli Based Company filed for Liquidation in
More informationMPM. Momentum Series Stencil Printer. A cost-effective printing solution with innovative technology and outstanding capability
A highly reliable printing system that is simple to learn and easy to use, with performance that is unmatched by any other printer in its class. MPM Momentum Series Stencil Printer A cost-effective printing
More informationADVANCED PACKAGE REWORK
ADVANCED PACKAGE REWORK SCORPION PRODUCT TRAINING VER.02-2018 2018 DESCO INDUSTRIES For support issues: www.smarttec.dk Scorpion Product Range Scorpion APR-1100-SRS Single head with vision alignment accuracy
More informationEXPERT Pick + Place. Manual and semiautomatic SMD assembly systems. swiss made
EXPERT Pick + Place Manual and semiautomatic SMD assembly systems swiss made SMD placement systems for prototyping and low volumes Manual and semiautomatic models Smooth gliding arm system Air suspended
More informationThe New LPKF ProtoMat Circuit Board Plotters Enabling the Next Generation of In-House PCB Prototyping
The New LPKF ProtoMat Circuit Board Plotters Enabling the Next Generation of In-House PCB Prototyping Solutions that Evolve with Your Project Needs Circuit board plotters from LPKF Laser & Electronics
More informationScreen- and stencil printers
Screen- and stencil printers manual stencil printer S1 incl. variable rapid tensioning system ( 2 fold ) PCB size: max. 300 x 250 mm manual precision screen and stencil printer S10 table lowering: automatical
More information1414/1818 DISPENSING SYSTEMS
S P E E D L I N E T E C H N O L O G I E S C A M A L O T 1414/1818 DISPENSING SYSTEMS STAND-ALONE SOLDER PASTE AND ADHESIVE DISPENSERS FOR ELECTRONICS, GASKETING AND ASSEMBLY C A M A L O T 1 4 1 4 / 1 8
More informationMS9000SE: 2 Ways Rework Station. Catalogue (Ver.1.06) Overview. Main Features;
MS9000SE: 2 Ways Rework Station. Catalogue (Ver.1.06) Overview MS9000SE is the all-round rework system which almost all SMD can be reworked. And the original ITTS auto profiler system is operates of the
More informationNext Generation In-House PCB Prototyping The New LPKF ProtoMat Circuit Board Plotters
Next Generation In-House PCB Prototyping The New LPKF ProtoMat Circuit Board Plotters Growing With the Job... Quick, accurate and easy to use LPKF circuit board plotters have been meeting these user requirements
More informationNext Generation In-House PCB Prototyping The New LPKF ProtoMat Circuit Board Plotters
Next Generation In-House PCB Prototyping The New LPKF ProtoMat Circuit Board Plotters Growing With the Job... Quick, accurate and easy to use LPKF circuit board plotters have been meeting these user requirements
More informationAMERICAS Tel or Tel ASIA Tel CHINA Tel.
www.uic.com email: universal@uic.com AMERICAS Tel. 1-800-432-2607 or Tel. +1-607-779-7522 ASIA Tel. +65-6281-0991 CHINA Tel. +86-755-2686-0160 EUROPE Tel. +36-23-445500 2007 Universal Instruments Corporation.
More informationReliable Stable High Speed Screen Printer US-X
Reliable Stable High Speed Screen Printer US-X ESE Co., Ltd, with headquarter & facility in South Korea, is a manufacturer of quality screen printers for the semiconductor and SMT assembly markets. Established
More informationERSA Product Range. Page 1
Page 1 The ERSA Complete Product Range Stencil & Screen Printers Reflow Soldering Machines Selective Soldering Machines Wave Soldering Machines SMT / BGA Rework Systems SMT / BGA Inspection Systems Soldering
More informationMomentum Series. Printing System. Electronic Assembly Equipment
Electronic Assembly Equipment Momentum Series Printing System A proven high-performance printing platform - flexible, configurable, and easy to use, with speed and accuracy unmatched by any other printer
More informationPRELIMINARY APPLICATION SPECIFICATION
SEARAY BOARD TO BOARD INTERCONNECT SYSTEM 4970 / 466 SMT Plug Connector (shown with kapton pad for pick and place) 4971 / 467 SMT Receptacle Connector (shown with kapton pad for pick and place) SEARAY
More informationIntegra Series: Model 508.5
Integra Series: Model 508.5 Selective Soldering System for High-Volume, High-Performance Soldering Features and Benefits Five-zone in-line operation with simultaneous fluxing, preheating and up to three
More informationSelective Soldering. from InterSelect Germany. of Selective Soldering Machines. Perfect Service. German Quality.
The new Generation of Selective Soldering Machines Worldwide Network. Innovative Products. Perfect Service. German Quality. Selective Soldering from InterSelect Germany A wide range from a small stand-alone
More informationOver 5,000 products High Performance Adapters and Sockets Many Custom Designs Engineering Electrical and Mechanical ISO9001:2008 Registration
Overview Company Overview Over 5,000 products High Performance Adapters and Sockets Many Custom Designs Engineering Electrical and Mechanical ISO9001:2008 Registration Adapter Technology Overview Pluggable
More informationValue. Scalability. Performance.
www.uic.com email: universal@uic.com AMERICAS Tel. 1-800-432-2607 or Tel. +1-607-779-7522 CHINA, SHENZHEN Tel. +86-755-2685-9108 CHINA, SHANGHAI Tel. +86-21-6495-2100 EUROPE Tel. +421-2-4930-96-60 2017
More informationAdapter Technologies
Adapter Technologies Toll Free: (800) 404-0204 U.S. Only Tel: (952) 229-8200 Fax: (952) 229-8201 email: info@ironwoodelectronics.com Introduction Company Overview Over 5,000 products High Performance Adapters
More informationPROCESSING RECOMMENDATIONS. For Samtec s SEAM8/SEAF8 Vertical Connectors
The method used to solder these high density connectors is the same as that used for many BGA devices even though there are some distinct structural differences. BGA s have spherical solder balls attached
More informationAdvanced BGA Rework Station. Suitable for all kind of reworks on different SMT components
Advanced BGA Rework Station Suitable for all kind of reworks on different SMT components Advanced BGA Rework Station New Key Features Compact and Stable Design Larger Board Holding Capacity One Touch Lock
More informationEMS Plant List 23 rd November 2018 Issue 2.1
EMS Plant List Issue 2.1 Plant List Overview Surface Mount Assembly 2 x fully automated Surface Mount Lines with capacity up of 148,000 CPH and placements down to 01005 Line 1 = 38,000 CPH Line 2 = 110,000
More informationSMD Reflow Soldering Guide. Version 1.2
SMD Reflow Soldering Guide Version 1.2 Copyright Neoway Technology Co., Ltd 2017. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior
More informationTR7700 SIII 3D SERIES
TR7700 SIII 3D SERIES AUTOMATED OPTICAL INSPECTION TR7700 SIII 3D F E A T U R E S Defects TR7700 SIII 3D AOI with Total Inspection Coverage The TR7700 SIII 3D AOI combines the best of 2D and 3D technologies
More informationAgilent s AXI History
Agilent s AXI History Development Overview Throughput Improvement Hardware Differences Software Release Comparison 8.X Software Stream Supportability Comparison Model and Major Change Details Model Differences
More informationPROCESSING RECOMMENDATIONS
PROCESSING RECOMMENDATIONS For Samtec s 0.80mm SEARAY Right Angle (SEAF8-RA) Connectors The method used to solder these high-density connectors is the same as that used for many BGA devices even though
More informationSpectrum S-920N-C Cleanroom Series
Spectrum S-920N-C Cleanroom Series Scalable solutions for high-volume manufacturing and assembly Features and Benefits Third-party certified for Class 100 compliance Stainless steel enclosure has a passivated
More informationMICROPLACEMENT BONDING AUTOMATION ONYX OPTIONS OPTIONS SMT ONYX APPLICATIONS: ZEVAC LINE:
MICROPLACEMENT BONDING AUTOMATION ONYX OPTIONS OPTIONS APPLICATIONS: ZEVAC LINE: 4.301 SMT ONYX OVERVIEW 2 Options for profile and temperature control Options for component / PCB handling Options to apply
More informationVer.1.1. subject to be changed without prior notice
Ver.1.1 subject to be changed without prior notice SMT EUROPE 1. SMT LINE Configuration (External PSA) 8 1 2 3 4 5 6 7 9 N70-e Series Reflow Is developed to realize ultra low energy consumption following
More informationProduct Description. General System Description. Functional Summary. Labeling Capabilities. Product Transport
Product Description Revised - 02/02/2009 General System Description Functional Summary Amistar's DataPlace Model LCL is a CE compliant labeling system that performs automated placement of labels onto a
More informationFYS4260/FYS9260: Microsystems and Electronics Packaging and Interconnect. Production of Printed Circuit Boards
FYS4260/FYS9260: Microsystems and Electronics Packaging and Interconnect Production of Printed Circuit Boards Learning objectives Understand central design and production processes of PCBs Layout principles
More informationAMERICAS Tel or Tel CHINA, SHENZHEN Tel
www.uic.com email: universal@uic.com AMERICAS Tel. -800-432-2607 or Tel. +-607-779-7522 CHINA, SHENZHEN Tel. +86-755-2685-908 CHINA, SHANGHAI Tel. +86-2-6495-200 EUROPE Tel. +36-23-445-500 200 Universal
More information3D AOI system. BF-3Di series NEW. The 3D AOI system that meets every need in the market.
3D AOI system NEW BF-3Di series The 3D AOI system that meets every need in the market. 3D measurement + auto inspection with side cameras + 2D inspection = BF-3Di series The BF-3Di series combines the
More informationFlash Card Test Handler
鴻勁科技 ( 股 ) 公司 HON. TECHNOLOGIES, INC. No. 3, Ln. 128, Sec. 1, Zhongqing Rd., Da Ya Township, Taichung County, Taiwan TEL: 886-4-25608752 FAX: 886-4-25608755 E-mail: tony@hontech.com.tw http://www.hontech.com.tw
More informationELCO Memory Card Components
ELCO Memory Card Components Table of Contents ELCO PCMCIA PC Memory Card Components Host Device Components Introduction... 3 Features & Benefits... 4 PC Memory Card Components Selection Guide...5 Host
More informationSystem Description. FINO Semiautomatic Stencil Printer Version 1.1 July 11 th Modification protocol Version
FINO Semiautomatic Stencil Printer Version 1.1 July 11 th 2012 Modification protocol Version Date Modification 1.00 29.05.2012 Release 1.01 11.07.2012 Dimension Drawings changed Essemtec AG Mosenstrasse
More informationHorizon ix DL RTC. Page 1 Part No Issue 01 April 12. Description
Description This dual lane solution comprises of two dual lane printers configured in series. Each printer has a core cycle time of 4 seconds, with the ability to print boards on one lane, whilst in parallel
More informationAdvance Package Rework Systems. Test Equipment Depot Washington Street Melrose, MA TestEquipmentDepot.
Advance Package Rework Systems Test Equipment Depot - 800.517.8431-99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com T o o l s f o r T e c h n o l o g y OK International has been a leading
More informationTR7700 SIII Plus SERIES AUTOMATED OPTICAL INSPECTION
TR7700 SIII Plus SERIES AUTOMATED OPTICAL INSPECTION TR7700 SIII Plus F E A T U R E S Premium AOI with World Class Performance TR7700 SIII Plus combines advanced high precision camera system and TRI's
More informationThrough-Hole and Surface Mount Equipment
Through-Hole and Surface Mount Equipment 97 Model 9700 XY Surf-Shooter SMT Zierick s family of full and semi-automated throughhole terminal insertion systems simplifies applications, and provides the greatest
More information3 D A O I s y s t e m. BF-3Di. The inspection ability is improved drastically by the height measurement of all parts.
3 D A O I s y s t e m BF-3Di The inspection ability is improved drastically by the height measurement of all parts. The unique optical design enabled all parts 3D inspection BF-3Di enables to measure the
More informationComponents Identification Chart
Components Identification Chart Components with no direct access to the solder joint To this group belong the Ball Grid Array family of devices such as (PBGA, CBGA, CCGA), CSP s or Micro BGA and components
More information,M,R,!iilll""M,:3 MEMS. ~ IliJctanill:5 Pac~ RSI. YSTEMS
,M,R,!iilll""M,:3 U!i!.,TIRAw.'";P,RElCISIONI,F'LEXIBLE W,I!:IIR:I;C,ICELL, MEMS ~ IliJctanill:5 Pac~.... RSI. YSTEMS ULTRA-PRECISION flexible ASSEMBLY WORK CELL Turnkey production for: MEMS Multi-Chip
More informationSOFIX - A fully shielded front IO solution. Product Presentation
- A fully shielded front IO solution Product Presentation Product Description SOFIX is a front IO interconnection system comprised of R/A headers and cable plugs, suitable for the distribution of power
More informationPrecision Cutting of Printed Circuit Boards and Cover Layers UV Laser Cutting with LPKF MicroLine 2000 Systems
Precision Cutting of Printed Circuit Boards and Cover Layers UV Laser Cutting with LPKF MicroLine 2000 Systems Beaming Cutting-Edge Technology LPKF UV laser cutting systems quickly, cleanly, and precisely
More informationFLX2011/2021/2031 SMD Pick&Place
FLX2011/2021/2031 SMD Pick&Place Version 3.1 August, 2009 Essemtec AG Mosenstrasse 20 CH-6287 Aesch/LU Switzerland Phone: +41 (0)41 919 60 60 Fax: +41 (0)41 919 60 50 info@essemtec.com www.essemtec.com
More informationS P E C I F I C AT I O N S
700SERIES Speedprint platforms are the result of years of meticulous materials, manufacturing and process control excellence. Sitting at the top of our product range, the SP700 Series is engineered to
More informationDesign and Assembly Process Implementation for BGAs
ASSOCIATION CONNECTING ELECTRONICS INDUSTRIES Design and Assembly Process Implementation for BGAs Developed by the Device Manufacturers Interface Committee of IPC October 25, 2000 Users of this standard
More informationH610 Fully Automatic Screen Printer
H610 Fully Automatic Screen Printer Description H610 with automatic recognition function of machine vision, using high-precision Servo drive system to achieve fast and accuracy alignment.the precision
More informationManufacturing Notes for RF1602
Manufacturing Notes for RF1602 The information in this publication is believed to be accurate and reliable. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for
More informationIntroduction Overview Of Intel Packaging Technology
1 1.1 Overview Of Intel Packaging Technology As semiconductor devices become significantly more comple, electronics designers are challenged to fully harness their computing power. Transistor count in
More information40-Position BGA/LGA PCBeam Connector for Texas Instruments Series 310 DMD
PCBeam Connector for 40-Position BGA/LGA PCBeam Connector for Texas Instruments Series 310 DMD Neoconix P/N: FBX0040CMFF6AU00 FEATURES High density 0.7424mm area-array pitch Low profile, 1.06mm mated height
More informationDesolder. Lift. Position. SOLDER. WTQB1000 rework system
Desolder. Lift. Position. SOLDER. WTQB1000 rework system 1 Freely positionable arm with exchangeable attachments The arm can be positioned completely freely. Components are positioned using three XYZ control
More informationProducts, Services & Capabilities
Products, Services & Capabilities Toll Free: (800) 404-0204 U.S. Only Tel: (952) 229-8200 Fax: (952) 229-8201 email: info@ironwoodelectronics.com Overview Company Overview Founded 1986 Over 5,000 products
More informationPrecision Advanced Package Rework
Precision Advanced Package Rework The APR-5000 Series Advanced Package Rework Systems incorporate state-of-the-art vision, and closed-loop time, temperature and airflow control. Precision placement and
More informationDRILLING SERIES MULTISTATION EVOLUTION LZ NEW HIGH SPEED MODULAR MICRODRILLING STATION
DRILLING SERIES MULTISTATION NEW HIGH SPEED MODULAR MICRODRILLING STATION ALL AXES WITH LINEAR MOTORS MULTISTATION IS THE MOST SUITABLE UNIT FOR ANY POSSIBLE DRILLING/ROUTING APPLICATION MULTISTATIONO
More informationVFT-orbit. Generating All-Format Lenses Circumvolution Technology. High throughput, compact footprint, moderate weight, easy service access.
Ophthalmic Generating Generating All-Format Lenses Circumvolution Technology High throughput, compact footprint, moderate weight, easy service access. exceptionally accurate and error-free surface quality
More informationApplication Note 5363
Surface Laminar Circuit (SLC) Ball Grid Array (BGA) Lead-free Surface Mount Assembly Application Note 5363 Introduction This document outlines the design and assembly guidelines for surface laminar circuitry
More informationManufacturing Notes for RFPA3809
Manufacturing Notes for RFPA3809 The information in this publication is believed to be accurate and reliable. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for
More informationEDSYN Quality. PHONE: FAX (Sales): FAX (Service): INTERNET:
When your name is on the line in today s electronics universe, precise performance and adaptability count. EDSYN is dedicated to manufacturing the world s finest quality products in accordance to the line
More information4796A/B/R/L High Speed SMC Placement System
Universal Part Number: GS-386-02A Reference Configuration # 46368501 Issued 4/00 4796A/B/R/L 4796A/B/R/L High Speed SMC Placement System 4796A/B/R/L GS-386-02A 4796A/B/R/L Surface Mount Product Line 4796
More informationAssembly Considerations for Linear Technology Module TM BGA Packages. July
Assembly Considerations for Linear Technology Module TM BGA Packages July 2012 Package Construction PCB Design Guidelines Outline Moisture Sensitivity, Pack, Ship & Bake Board Assembly Process Screen Print
More informationReflow Soldering of MEMS Microphones
Reflow Soldering of MEMS Microphones Page 1 of 7 Introduction This application note provides guidance and suggestions for assembling boards with MEMS microphones. Parameter and profile details are presented,
More informationOptiCon X-Line 3D. Combined 3D X-ray and Optical Inspection at Production Line Pace
OptiCon X-Line 3D Combined 3D X-ray and Optical Inspection at Production Line Pace 1470 mm Automated X-Ray Inspection (AXOI) OptiCon X-Line 3D: AXI and AOI teamed up High-Speed X-Ray System for Maximum
More informationEase of Operation. Tooling
Flexible, entry level screen printer The 248 is an entry level unit developed for customers requiring a flexible, semi-automatic machine with high precision and high yield capabilities. The 248 uses precision
More informationRework Technic eco. MARTIN Expert 04.6 Cost Effective Rework for all SMD Components REWORK TECHNIC PC.
Rework Technic eco MARTIN Expert 04.6 Cost Effective Rework for all SMD Components REWORK TECHNIC PC www.martin-smt.de Rework for Improvers Whether for soldering, placement, removal of residual solder
More informationMultiCam 1000 Series CNC Router Feature and Specification Guide. Maximum Flexibility Made Affordable! MultiCam. Ideal for Cutting: Wood
MultiCam 1000 Series CNC Router Feature and Specification Guide Maximum Flexibility Made Affordable! MultiCam accepted the industry challenge to build a rigid, reliable CNC machine platform with excellent
More informationBGA/QFP Rework Systems
BGA/QFP Rework Systems Technical Data ESD WHA 3000P WHA 3000V WQB 4000SOPS Dimensions (B x L x H) mm: 240 x 270 x 170 240 x 270 x 101 630 x 630 x 650 Dimensions (W x L x H) inch: 9,44 x 10,63 x 6,69 9,44
More informationUltrasonic Heavy Wire Bonder M17
PRODUCT-BROCHURE Ultrasonic Heavy Wire Bonder M17 F & K DELVOTEC The Heavy Wire Bonder specialist delivers the perfect solution for any bonding challenge in the IGBT, smart power module and hybrid assemblies
More informationTR7700 SIII 3D SERIES AUTOMATED OPTICAL INSPECTION
TR7700 SIII 3D SERIES AUTOMATED OPTICAL INSPECTION TR7700 SIII 3D F E A T U R E S Defects TR7700 SIII 3D AOI with Total Inspection Coverage The TR7700 SIII 3D AOI combines the best of 2D and 3D technologies
More informationELASTOMERIC CONNECTORS. the smart solution for high-volume interconnections in compact design
ELASTOMERIC CONNECTORS the smart solution for high-volume interconnections in compact design A NICE SIMPLE, RELIABLE CONNECTION How do elastomeric connectors work? STAX elastomers are zero insertion force
More information1. Table of contents History Tools Parts manipulation Soldering Soldering iron or station...
1. TABLE OF CONTENTS 1. Table of contents... 3 2. History... 15 3. Tools... 19 3.1. Parts manipulation... 19 4. Soldering... 23 4.1. Soldering iron or station... 23 4.2. Hot-air rework stations... 24 4.3.
More informationVer Specification. Electronic Component Mounting System. Modular High Speed Placement Machine. Model ID : CM202-DS
Ver. 2005.0201 Specification Electronic Component Mounting System Modular High Speed Placement Machine Model ID : CM201-DS Model No : KXF-E14C Model ID : CM202-DS Model No : KXF-E24C Cautions Regarding
More informationVimercati spa. Electronic R&D Department. Pero, April 1 st, 2013
Vimercati spa Electronic R&D Department Pero, April 1 st, 2013 Via Vincenzo Monti, 38 20016 Pero (MI) - Italy Phone +39 02 381941 Fax +39 02 3538485 www.vimercati.com, info@vimercati.com The Electronic
More informationAutomatic optical inspection
Automatic optical inspection Summary: TV350/TV430/TV600 automatic optical inspection machine mainly includes five parts: 3 axis serve driving system, hardware control system, optical software automatic
More informationZLS Corporation. ZLS Dynamic Meter for Marine Applications EXCELLENCE IN GRAVITY METERS. ZLS Dynamic Meter. Applications
ZLS Corporation EXCELLENCE IN GRAVITY METERS Highest Quality Most Precise Most Rugged Most Reliable Applications Eliminates damper adjustments Eliminates cross-coupling errors Smaller residual imperfection
More informationSaver Series. Model: SS16. Model: SS30 & SS26. Model: SS36 & SS32. Model: SS16-W
CARTS & STATIONS Saver Series Saver Series allows you to store, secure, charge and deploy up to 36 devices and protective cases up to 1 thick. Compatible with Laptop, Chromebook, Ultrabook, Netbook, ipad
More informationTURN-KEY SMT/THT SOLUTION
TURN-KEY SMT/THT SOLUTION INTRODUCTION InterElectronic Hungary Ltd. offers equipments, machines and different materials (ESD) of different production technologies (SMT/THT/LED). Including high quality,
More information