Assembly instructions

Size: px

Start display at page:

Download "Assembly instructions"

Franklin Mosley
5 years ago
Views:

1 Assembly instructions MKG_ENG_Instructions_H-line_V16_ But also...

2 for choosing Thank you

3 Table of Contents GREY YELLOW PINK GREEN PURPLE DARK GREEN LIGHT BLUE ORANGE BROWN BLUE Identification of the Crate 4 Assembly Guidelines 5 Smart, optimized storage 6 Module Color-Coding and Chronology (Example) 7 Connecting Frames 8 Standard Lightbox Module 10 Standard Module - Angled pole 11 Closet Module 12 Storage Module (1m 2 ) and Closet 13 Storage Module (2m 2 ) 14 Shelving Module 15 Multimedia Module 16 Multimedia Module - Touchpad 17 Arch Module 19 Console Module 21 Header Module 23 Signage Module 25 Side Module 26 Counter Module 27 Counter Module (Door) 27 Connection Module 28 Finishing Touches 29 Feet Profile Covers Shelves 30 Universal attachment piece Brochure holder 31 Hanging Rod Free-Standing Shelf 32 LED Lights Power Supply Attachment 33 Graphics 34 3

4 Identification of the Crate H1 CRATE CONNECTORS ACCESSORIES FURNISHINGS H2 CRATE H4 CRATE Use a h-line connector to extract the first frame. 4

Assembly Guidelines 2 5 1 3 4 Do not disassemble the frame or remove the

5 Assembly Guidelines Do not disassemble the frame or remove the graphic Do not place the frame on the ground graphic side down

6 Smart, optimized storage 960 mm Angled pole storage 240 mm 480 mm 480 mm FRAME CONNECTION Console Module Counter Module Header Module Some frames are connected during shipping Standard Module 48 To disconnect the frames, refer to the corresponding modules (see table of contents) Standard Module 96 6

Module Color-Coding and Chronology (Example) 4 23 25 24 6 5 3 15 22 7 2 8 1 Start Here 12 16 13 17 14 21 10 18 11 9 20 19 PINK 1.

7 Module Color-Coding and Chronology (Example) Start Here PINK 1. Find the «Start Here» arrow on your booth rendering Look at module colors on your booth rendering and refer to the corresponding pages BLUE Locate frames in the crate using the numbering system 3. Look at the frame s color 4. Locate the page with the corresponding color in the instructions 5. Assemble your stand following the chronological order 7

8 Connecting Frames 1 Open completely Connector Insert 2 3 Lock 1/4 turn 8

9 Connecting Lightbox Frames Standard frame / lightbox connection Connector Open completely 1/4 turn Insert Lock Lightbox / lightbox connection Connector Open completely Insert 1/4 turn Lock 9

10 Standard Lightbox Module 1 Rotate feet 2 Plug (optional) GREY or 10

11 Standard Module - Angled Pole 1 Identify 2 Attach 3 Connect GREY YELLOW x4 Angled pole 11

12 Closet Module GREY YELLOW PINK 1 Attach the door 2 Connect the frames 3 Position shelves 4 Snap profile covers into place Black inside graphics See storage accessories (p31) x2 x8 x2 Open door Lock door for transport 12

13 Storage Module (1m 2 ) and Closet 1 Attach the door 2 Connect the frames 3 Snap profile covers into place PINK Black inside graphics See storage accessories (p31) x8 x2 Open door Lock door for transport 13

14 Storage Module (2m 2 ) 1 Attach the door 2 Connect the frames 3 Snap profile covers into place PINK Black inside graphics See storage accessories (p31) 2 Open door x2 Lock door for transport 14

15 Shelving Module 1 Rotate feet 2 Insert shelves GREY YELLOW PINK GREEN 3 Adjust level 10kg 15

16 Multimedia Module 1 Rotate feet 2 Attach TV 3 Insert lock PURPLE Side View Rear View TV wires Push lightly on the graphic Location for lock 16

17 Multimedia Module - Touchpad 1 Rotate feet 2 Attach cable to frame and feed through the graphic 3 Insert shelf GREY YELLOW PINK GREEN PURPLE

18 Multimedia Module - Touchpad 4 Fasten tablet holder to tablet 5 Fasten tablet holder to shelf 6 Adjust the angle GREY YELLOW PINK GREEN PURPLE Support the shelf 7 Lock the padlocks 1. The pre-set combination is Push the button A in the direction of the arrow. Hold it until completing the next step. 3. Turn the Dial B to your desired personal combination. 4. Release the Button A. Now the lock will open at the desired combination. A B Ensure it is secure 18

19 Arch Module 1/2 1 Rotate feet 2 Position yourself where the canopy will go 3 Place the canopy frame so that the edge straddles the vertical panel DARK GREEN x2 19

20 Arch Module 2/2 4 Connect 5 Position the arch 6 Snap profile covers into place DARK GREEN Front canopy attachment Rear canopy attachment x2 x4 20

21 Console Module 1/2 1 Disconnect the frames 2 Connect the frames 3 Snap profile covers into place x2 LIGHT BLUE x5 Transport position 21

22 Console Module 2/2 4 Insert console top Attach console top 1 5 Position shelf LIGHT BLUE 2 x5 22

23 Header Module 1/2 1 Disconnect the frames 2 Insert the connection tubes 3 Insert 4 Add ORANGE x6 x8 Transport position 23

24 Header Module 2/2 5 Lock 6 Position 7 Lock 8 Snap ORANGE x8 x4 24

25 Signage Module 1 Connect the attachment bar or GREY YELLOW PINK GREEN PURPLE DARK GREEN LIGHT BLUE ORANGE mm vertical rectangle 1200x480 mm horizontal rectangle 480x480 mm square x4 2 Attach to frame Different attachment positions For the backlit version, refer to page 33 25

26 Side Module 1 Connect 2 Snap Slits for graphic GREY YELLOW PINK Profile covers (see p25) GREEN PURPLE DARK GREEN LIGHT BLUE ORANGE BROWN x2 Left version Right version No corner profile Two-sided graphic 26

27 Counter Module 1 Connect at an angle 2 Position shelf 3 Snap profile covers into place GREY YELLOW PINK GREEN PURPLE DARK GREEN LIGHT BLUE ORANGE BROWN BLUE x4 x6 With door 3b Attach door Snap profile covers into place x4 5 Place countertop Door x4 27

28 Connection module Double straight counter Double corner counter BLUE Connect the two counters to the connection module 1 Connect at an angle 2 Connect the counters 2 Place the countertop 3 Place the countertop 4 Adjust and secure the countertop x4 x6 1/4 turn 1/4 turn 3 Adjust and secure the countertop Lock Lock 28

29 Finishing Touches Single-sided feet Profile covers Snap Closed position for transport Open and locked position Free-standing position Double-sided feet Click Click 29

30 Finishing Touches Shelves 1 Identify Locate pierced areas on graphics Universal attachment piece 1 Fix your object on the universal attachment piece Screw it to the object Or stick it 2 Insert 2 kg 5 cm 1,5 kg 10 cm 1 kg 15 cm 500 g 20 cm 1 kg 5 cm 500 g 10 cm 2 Install it thanks to this universal attachment piece 3 Adjust Load < 10 Kg 30

31 Finishing Touches Brochure holder 1 Identify Locate pierced areas on graphics Hanging rod 1 Insert hanging rod 2 Insert 2 Hang Hangers included Header position 31

32 Finishing Touches Free-standing shelves LED light Assemble 1 2 x4 x4 2 x4 3 32

33 Finishing Touches Power supply attachment for backlit signage module Insert 1/4 turn Lock Open completely Attaches anywhere 33

34 Graphics Multi-panel option For: changing graphics rear graphics or multi-panel options Silicone edge insertion orientation Ensure that your frames are connected and the extremities are free Graphic orientation 1 Position corners 2 Insert silicone edges in the center 3 Repeat at the center of each segment 4 Finish with small pushes 34

35 Demand the original Panoramic is a patented solution available in 35 countries worldwide. Only Panoramic graphics can guarantee adherence to your country s fire-retardant standards. They are designed to block light perfectly and to provide an unparalleled colour rendering.

Assembly Instructions

Assembly Instructions MKG_NA-ENG_Instructions_H-line_V16_20170731 But also... for choosing Thank you, Table of Contents GREY YELLOW PINK GREEN PURPLE DARK GREEN LIGHT BLUE ORANGE BLUE Identification of