Pilot Pollution Analysis

Transcription

1 Pilot Pollution Analysis Based on UE or Scanner test data, Pilot Pollution Analysis is used to analyze the signal strength of serving and neighbor cells for 3/4G network technologies. The function analyzes strong cells or servers that are serving within a given threshold defined by the user for the purpose of identifying potential polluters. Statistics mode: UE, Scanner, and UE+Scanner.

2 Pilot Pollution Analysis The statistics results can be displayed by table and map, and can be exported to Excel format. Display by table Display by map

3 Pilot Pollution Analysis Based on UE or Scanner test data, Pilot Pollution Analysis is used to analyze the signal strength of serving and neighbor cells for 3/4G network technologies. The function analyzes strong cells or servers that are serving within a given threshold defined by the user for the purpose of identifying potential polluters. Choose Analysis > Pilot Pollution Analysis to enter its settings window, where users may set analysis conditions as required. The statistics results can be displayed by table and map, and can be exported to Excel format.

4 Cell Statistics and Analysis Based on test data files and site files, Cell Statistics and Analysis is used to perform parameter, KPI, and event statistics, as well as analysis for the serving cells. 2/3/4 G network technologies are supported.

5 Cell Coverage Analysis Based on UE or Scanner test data, Cell Coverage Analysis is used to analyze the signal strength of serving and neighbor cells. The cell coverage is verified through the statistics and analysis of KPIs such as BSIC, PN, PSC, CPI, and PCI. Three statistics mode: Parameter, TopN, and Serving Neighbor, which can be combined with Filter and Bin functions.

6 Coverage Rate Analysis Users may choose Analysis > Coverage Rate Analysis to perform coverage rate analysis. the detailed coverage information and statistics can be displayed in the table window, and related information can be displayed in the map window.

7 Cell Statistics and Analysis Based on test data files and site files, Cell Statistics and Analysis is used to perform parameter, KPI, and event statistics, as well as analysis on the serving cells. 2/3/4 G network technologies are supported. Choose Analysis > Cell Statistics and Analysis to enter its settings window, where users may set analysis conditions, for example, analysis name, parameters, and events, etc.

8 Cell Coverage Analysis Based on UE or Scanner test data, Cell Coverage Analysis is used to analyze the signal strength of serving and neighbor cells. The cell coverage is verify through the statistics and analysis of KPIs such as BSIC, PN, PSC, CPI, and PCI. There are three statistics mode, including Parameter, TopN, and Serving Neighbor, which can be combined with Filter and Bin functions. The statistics results can be displayed by table and map, and can be exported to *.txt or *.csv format. Choose Analysis > Cell Coverage Analysis to enter its settings window, where users may set analysis conditions, for example, analysis name, Bin, Filter, etc.

9 Cell Coverage Analysis The statistics results can be displayed by table and map, and can be exported to *.txt or *.csv format. Display by table Display by map

10 Cell Coverage Analysis The statistics results can be displayed by table and map, and can be exported to *.txt or *.csv format. Display by chart

11 Indoor Test Management and Statistics Report Indoor test statistics Users may choose Report > Specialized Report > Indoor Measurement Report to generate indoor test statistics reports, which includes summary of the whole building and KPIs of each floor.

12 Statistics Report Function Integrates all statistics report including voice service reports, data service reports (such as traditional and LTE data reports), and other reports (such as KPI report and Benchmarking report). Users may click Report on the menu bar and select required report template to generated related reports.