Wireless LAN and Bluetooth Module Evaluation Board

Size: px

Start display at page:

Download "Wireless LAN and Bluetooth Module Evaluation Board"

Rosalyn Charles
5 years ago
Views:

1 Wireless LAN and Bluetooth Module Evaluation Board This evaluation board is an object for experiment of operation, and does not guarantee quality. Moreover, the conditions of a module of operation are not recommended in the schematic, the parts, the software, etc. currently used for evaluation board. 1/6

2 ATTENTION: This module requires device drivers that are under Japan export control. Depending on the customer s country and application (e.g. weapons), may not be able to provide these drivers to all customers. Please contact your local sales office for additional information. To contact your local sales office and for additional product information, please visit 2/6

3 TABLE OF CONTENTS Introduction...4 Conformity module...4 Accessories...4 Recommendation operation environment...4 The example of connection...4 Evaluation board layout...5 Pin description of evaluation board...5 BOM of evaluation board...6 Schematic of evaluation board...7 Rev. Records 1-Jul.2015> Ver.1.0 Released 15-Sep.2017> Ver.1.1 Update 3/6

4 Introduction This evaluation board is developed for communication test of Wireless LAN and Bluetooth module which TAIYO YUDEN develops and sells. This evaluation board makes it possible to perform easily the communication test of Wireless LAN and Bluetooth module of TAIYO YUDEN. Conformity module WYSAAVDXB Accessories 1 Evaluation Board (TE8586) 1 piece 2 DC Power Cable 1 piece Recommendation operation environment PC with Linux Fedora18 with software development option and SDIO interface(cpu 1000MHz or higher) Attention: PC with SDIO is required. Although SDIO and SD Memory Card have the same slot shape, they are not compatible. WLAN Module and Evaluation Board will not work if they are connected to SD memory card slot. The example of connection 1. SDIO PC SDIO (WLAN/ BT) SDIO IF EV Board (TE8586) DC3.3V Power Supply CN3 4/6

5 Evaluation board layout WLAN and Bluetooth Module JP1: Power supply for VIO (WYSAAVDXB) CN3: DC power supply (3.3V) (Blue: GND) Pin description of evaluation board TE8586 JP1, CN4: Power Supply for VIO (Default Setting: JP1 short.) No. Pin name Direction Description JP1 VIO power supply from VDD3.3. CN4 VIO power supply from external supply. CN3: DC Power Supply No. Pin name Direction Description 1 VCC Input 3.3V input. 2 GND Ground 5/6

6 BOM of evaluation board TE8586 Ref Name Description Value Parts name and standard Supplier U1 IC TPS3808G01 TI or equivalent CN1 CONNECTOR PIN_HEADER_D16 CN2 CONNECTOR 20FZ-SM1-GAN-TB JST or equivalent CN3 CONNECTOR PIN_HEADER_S2 CN4 CONNECTOR S2B-XH-A JST or equivalent CN5 CONNECTOR PIN_HEADER_S2 JP1 CONNECTOR PIN_HEADER_S2 SW1 Switch HP03-15AFKP2 Nikkai or equivalent C1 C2 C3 C4 C5 C6 C7 C8 C9 C10 C11 C12 C13 CAPACITOR 10uF JMK107 BJ106MA-T TAIYO YUDEN or equivalent C14 CAPACITOR 10uF JMK107 BJ106MA-T TAIYO YUDEN or equivalent C15 CAPACITOR 1uF LMK105 BJ105KV-F TAIYO YUDEN or equivalent C16 CAPACITOR 0.1uF LMK105 BJ104KV-F TAIYO YUDEN or equivalent C17 C18 R1 R2 R3 R4 R5 R6 R7 R8 R9 RESISTOR 0ohm CR10-000V HDK or equivalent R10 RESISTOR 0ohm CR10-000V HDK or equivalent R11 RESISTOR 0ohm CR10-000V HDK or equivalent R12 RESISTOR 0ohm CR10-000V HDK or equivalent R13 RESISTOR 20kohm CR10-203JV HDK or equivalent R14 RESISTOR 300kohm CR10-304JV HDK or equivalent R15 RESISTOR 100kohm CR10-104JV HDK or equivalent R16 RESISTOR 0ohm CR10-000V HDK or equivalent R17 RESISTOR 0ohm CR10-000V HDK or equivalent R18 RESISTOR 1kohm CR10-102JV HDK or equivalent R28 PCB PCB PB-TE8586 6/6

Wireless LAN Module Evaluation Board

Wireless LAN Module Evaluation Board WBSAAVDX7 This evaluation board is an object for experiment of operation, and does not guarantee quality. Moreover, the conditions of a module of operation are not