StingRay Series Visual Guide
|
|
|
- Neal Wilkins
- 5 years ago
- Views:
Transcription
1 StingRay Series Visual Guide Covering RigLits and StingShot-Stinger-StingRay Configurations The StingRay series is the latest and most versatile addition to our long line of award-winning camera supports. Completely modular and tool-free in design, the StingRay series is built up with RigLits architecture, a system of support components mounted on industry-standard 15mm rods. The RigLits system allows you to buy our unique, ergonomic components to upgrade 15mm rod systems from other manufacturers, or build your own system from the ground up. Check out this visual guide for detailed information. Master StingRay configuration in exploded view Note: Levers and knobs on actual unit may differ slightly from those shown in this manual
2 Stinger III StingRay Stinger Stinger II StingShot
3 The StingRay series modular support is designed with several attributes in mind: flexibility, compatibility, portability, and reliability. Based on standard 15mm rods, the StingRay series builds up using the RigLits system, which allows you to buy components (RigLits) incrementally to configure own support or add our components to another manufacturer s 15mm rod-based system. There are 5 recommended configurations, all of which are available with the master StingRay system. In other words, if you buy the VZ-StingRay, you can configure it into at least 5 setups (each shown on the previous page), and the entire system breaks down neatly for compact storage and transport without the use of any tools. The StingShot and Stinger I, II, & III are each capable of fewer configurations than the master StingRay, but each system can be purchased as a turnkey product and upgraded through the purchase of RigLits (below): VZ-R1001 Belt/Holster + Suspension Pod + Articulated Pod Socket + Rod Clamp VZ-R1000 Quick-Release Camera Platform + Rod Clamp VZ-R1002 Dual Handle System (telescoping & adjustable) VZ-R1003 Pair 15mm x 8 Rods VZ-R1004 Pivoting Pistol Grip/Shoulder Stock with Rod Clamp VZ-R1005 Padded Shoulder Arch Brace w/ Pivoting Counterweight VZ-R1006 Padded Shoulder Brace w/ Pivoting Counterweight + Pivoting Pistol Grip/Shoulder Stock
4 WARNINGS: 1) Always tighten all locking knobs and attach rod endcap screws before operating the unit failure to do so could result in accidental separation of components and damage to your camera. 2) Always tighten the locking knobs on the suspension pod when storing and handling. Only unlock the knobs when the suspension pod has been properly mounted into the belt holster and the articulated socket on the fully assembled StingRay/Stinger camera support. Also make sure the endcap screw is attached to the short mounting rod on the articulated socket. Setup and Configuration The RigLit system allows for great flexibility in how your support can be configured and adjusted. We recommend using the systems in one of the 5 configurations depicted in this manual. You should be able to assemble the system by using this manual as a visual guide. If you are using one of our RigLits to upgrade a support from another manufacturer, please make sure you continue to adhere to any warnings or special instructions given by the manufacturer.
5 StingShot Assembly
6 Stinger Assembly
7 Stinger II Assembly
8 Stinger III Assembly
9 StingRay Assembly Warranty: 2 years for parts and labor, covering defects in manufacturing or workmanship. Warranty does not cover lost or damaged parts If you have questions or comments, please feel free to contact us!
Zero Gravity Rig Operating Instructions
Welcome to our new top-of-the-line shoulder support system for cameras up to 15 lbs - the ZG Rig. In addition to its totally unique vertical balancing mechanism, this system is designed to be configurable
INSTRUCTION MANUAL EN
CS-CHRONOS HDSLR/DV SUPPORT SYSTEMS INSTRUCTION MANUAL EN Please read this manual carefully before using the Cambo CS rig! CAMBO WHERE TRADITION MEETS VISION MADE IN THE NETHERLANDS Thank you for purchasing
INSTRUCTION MANUAL EN
CS-ERIS HDSLR/DV SUPPORT SYSTEMS INSTRUCTION MANUAL EN Please read this manual carefully before using the Cambo CS rig! CAMBO WHERE TRADITION MEETS VISION MADE IN THE NETHERLANDS Thank you for purchasing
DSLR Camera Cage Shoulder Rig Kit
DSLR Camera Cage Shoulder Rig Kit I N S T R U C T I O N M A N U A L All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,
POWER DSLR Camera Cage Shoulder Rig Kit
FILMCITY POWER SHOULDER RIG 1 POWER DSLR Camera Cage Shoulder Rig Kit I N S T R U C T I O N M A N U A L All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or
POWER DSLR Camera Cage Shoulder Rig Kit
FILMCITY POWER SHOULDER RIG 1 POWER DSLR Camera Cage Shoulder Rig Kit I N S T R U C T I O N M A N U A L All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or
Shoulder Support System
SR-500 Video Shoulder Support System Thank you for choosing Revo and congratulations on your purchase of the Revo SR-500 Video Shoulder Support System. The Revo Video Shoulder Support System is a lightweight,
DSLR Camera Cage Shoulder Rig Kit (FC-03)
FILMCITY DSLR Camera Cage Shoulder Rig Kit 1 DSLR Camera Cage Shoulder Rig Kit (FC-03) I N S T R U C T I O N M A N U A L All rights reserved. No part of this document may be reproduced, stored in a retrieval
FlowPod Stabilizer / MonoPod / Low Mode
FlowPod Stabilizer / MonoPod / Low Mode FlowPod Operating Manual Thank you for purchasing the versatile FlowPod, our patented stabilizer/support. The FlowPod offers several shooting options that will help
DSLR Camera Cage Carbon Fiber Shoulder Rig Kit ( FC-02-CF )
FILMCITY DSLR Camera Cage Carbon Fiber Shoulder Rig Kit 1 DSLR Camera Cage Carbon Fiber Shoulder Rig Kit ( FC-02-CF ) I N S T R U C T I O N M A N U A L All rights reserved. No part of this document may
VZ-SnapCrane-12 Professional Modular Camera Crane Instruction Manuall
VZ-SnapCrane-12 Professional Modular Camera Crane Instruction Manuall WEIGHTS NOT INCLUDED STANDARD 1 -HOLE BARBELL WEIGHTS ARE AVAILABLE AT MOST SPORTING GOODS STORES For a video tutorial SnapCrane Build,
Advanced Camcorder Support System. Instruction Manual
Advanced Camcorder Support System Instruction Manual PAG ORBITOR Advanced Camcorder Support System Instruction Manual CONTENTS SECTION PAGE 1 SAFETY 2 2 ASSEMBLY & OPERATION 3 3 PARTS AND ASSEMBLIES 9
VZ-SnapCrane-16 Professional Modular Camera Crane Instruction Manuall
VZ-SnapCrane-16 Professional Modular Camera Crane Instruction Manuall WEIGHTS NOT INCLUDED STANDARD 1 -HOLE BARBELL WEIGHTS ARE AVAILABLE AT MOST SPORTING GOODS STORES For a video tutorial SnapCrane Build,
Assembly and Usage Instructions. Product # Instruction # Revision A
Assembly and Usage Instructions Product #488029 Instruction #1046698 Revision A Read these instructions in their entirety before using this product. Failure to follow this warning could result in property
SF Studio Series Set-Up Instructions
SF Studio Series Set-Up Instructions Teleprompter Parts Step #1 Remove the quick-release plate from your tripod head. Set the plate on a flat surface (table, desk, etc) with anti-skid pads on top & camera
DSLR Video Shoulder Mount Rig (FC-55)
DSLR Video Shoulder Mount Rig (FC-55) INSTRUCTION MANUAL All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic,
Shop Fox Fence Kit Installation Instructions:
Shop Fox Fence Kit Installation Instructions: Please note this installation kit is designed solely for installation on a Shop Fox Classic Fence. Accurate Technology manufactures kits for other saw fences
StealthyPro Instructions
StealthyPro Instructions 3-point Shooter Mode / Handheld Mode / Monopod Mode Place the black piece between the handle and the silver ring (as pictured). Stabilizer Mode In stabilizer mode, thread the handle
DSLR Camera Cage Shoulder Rig Kit
DSLR Camera Cage Shoulder Rig Kit I N S T R U C T I O N M A N U A L For de monstratio n only All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or transmitted
PD Way Pan/Tilt Head. You re on steady ground
PD-117 3-Way Pan/Tilt Head You re on steady ground 1 Introduction Thank You for choosing Oben! This sturdy Oben PD-117 3-Way Pan and Tilt Head offers precise, smooth operation, with independent control
BA Series. Single Action Ballhead. You re on steady ground 1
BA Series Single Action Ballhead You re on steady ground 1 INTRODUCTION Thank You for choosing Oben! This Oben BA Series ballhead is a compact and lightweight head that provides nimble, reliable operation.
MBX INSTRUCTION MANUAL. Please read this manual carefully before using the MBX! Mid-range studio stand
MBX Mid-range studio stand INSTRUCTION MANUAL EN Please read this manual carefully before using the MBX! CAMBO Thank you for purchasing a Cambo product. This new classed Mid-range studio stand will suit
INSTRUCTION MANUAL EN
CS-CILIX HDSLR/DV SUPPORT SYSTEMS INSTRUCTION MANUAL EN Please read this manual carefully before using the Cambo CS rig! CAMBO WHERE TRADITION MEETS VISION MADE IN THE NETHERLANDS Thank you for purchasing
3500 Series Tripod Kit
3500 Series Tripod Kit You re on steady ground 1 INTRODUCTION Thank You for choosing Oben! This versatile and durable Oben tripod and ballhead is a compact and lightweight kit that sets up quickly, folds
RS-600AF-V2 RS-850AF-V2. Camera. Track Slider. with Adjustable Feet
RS-600AF-V RS-850AF-V Camera Track Slider with Adjustable Feet Warnings Please read and follow these instructions, and keep this manual in a safe place. Handle the unit with care. The camera sliding rail
BE Series. Dual Action Ballhead. You re on steady ground
BE Series Dual Action Ballhead You re on steady ground 1 Introduction Thank You for choosing Oben! This sturdy Oben BE Series Dual-Action ballhead provides smooth, effortless operation. Two locks provide
DSLR Filmmaking Kit 6-CF
DSLR Filmmaking Kit 6-CF INSTRUCTION MANUAL All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical,
Sit-to-Stand Workstation
Sit-to-Stand Workstation Product ID: ARMSTS This sit-to-stand workstation lets you change your working position throughout the day, to enhance your comfort and productivity. Go from sit to stand, with
GH-30. Gimbal Head. You re on steady ground
GH-30 Gimbal Head You re on steady ground 1 INTRODUCTION Thank You for choosing Oben! The Oben GH-30 is a gimbal-type tripod head designed to balance a lens along its vertical and horizontal axes. The
Gripper Campod Suction Car Mount (G-51)
Gripper Campod Suction Car Mount (G-51) I NSTRUC TI ON MANUA L All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,
Set up dual monitors, side by side or stacked
Dual-Monitor Arm - One-Touch Height Adjustment - Stackable StarTech ID: ARMDUAL30 The ARMDUAL30 Dual-Monitor Arm lets you customize your workspace like never before. Increase your comfort and productivity
Go from sit to stand, with one touch
Sit-to-Stand Workstation StarTech ID: ARMSTS This sit-to-stand workstation lets you change your working position throughout the day, to enhance your comfort and productivity. Go from sit to stand, with
DSLR SHOULDER RIG I N S T R U C T I O N M A N U A L. For Demonstration only
DSLR SHOULDER RIG I N S T R U C T I O N M A N U A L For Demonstration only All rights reserved No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by
Desk-Mount Dual Monitor Arm - Full Motion - Articulating - Stackable - Tool-less Assembly
Desk-Mount Dual Monitor Arm - Full Motion - Articulating - Stackable - Tool-less Assembly Product ID: ARMDUAL30 The ARMDUAL30 Dual-Monitor Arm lets you customize your workspace like never before. Increase
Biesemeyer Fence Kit Installation Instructions:
Biesemeyer Fence Kit Installation Instructions: Please note this installation kit is designed solely for installation on a Biesemeyer Commercial Fence. Accurate Technology manufactures kits for other saw
DX-M. Owner s Manual. Photo Tripod
DX-M Owner s Manual Photo Tripod Thank you for choosing Magnus. Congratulations on the purchase of your new Magnus tripod. This tripod features a rapid center column that detaches to serve as an adjustable
Curve-N-Line Camera Video Slider with Motion Control System (P-CNL-3MC)
Curve-N-Line Camera Video Slider with Motion Control System (P-CNL-3MC) I N STRUC TI ON MANUAL All rights reserved No part of this document may be reproduced, stored in a retrieval system, or transmitted
Camera Shoulder Mount Kit 201. (C-Kit-201)
Camera Shoulder Mount Kit 201 (C-Kit-201) I N S T R U C T I O N M A N U A L All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or
Universal Tablet Mount Accessory for Flex TechBridge
Assembly Instructions Universal Tablet Mount Accessory for Flex TechBridge Universal Tablet Mount Accessory Universal Tablet Mount Accessory mounted on Flex Arm CONTENTS Important User Information...........................2
Universal Desktop and Monitor Stand
Universal Desktop and Monitor Stand Installation Instructions Kit P/N: 114-6013 Kit Contents Kit Contents: (1) Stand Assembly (1) VESA Monitor Bracket (1) Bottom Bracket (1) Top Bracket (1) Clamp Bracket
artemis Cine Broadcast
1 artemis Cine Broadcast USER MANUAL Date 29. Jan. 2018 2 Imprint Imprint Copyright 2018 Arnold & Richter Cine Technik GmbH & Co. Betriebs KG. All rights reserved. No parts of this document may be reproduced
VIDEO Camera Cage WITH MATTE BOX FC-65-N
VIDEO Camera Cage WITH MATTE BOX FC-65-N I N S T R U C T I O N M A N U A L All rights reserved No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by
CTT Section Carbon-Fiber Tabletop Tripod. You re on steady ground 1
CTT-1000 3-Section Carbon-Fiber Tabletop Tripod You re on steady ground 1 INTRODUCTION Thank you for choosing Oben! The Oben CTT tripod is a sturdy and high-quality carbon-fiber tabletop tripod that provides
Belly Cruzer DSLR Steady Camera Rig FC-BC-DSR-P
FILMCITY Belly Cruzer-DSLR Steady Camera Rig (FC-BC-DSR-P) 1 Belly Cruzer DSLR Steady Camera Rig FC-BC-DSR-P I N S T R U C T I O N M A N U A L All rights reserved No part of this document may be reproduced,
FG-02 FG-02 LR PICTURED
FG-02 Fluid-Gimbal Head FG-02 LR PICTURED FG-02 Fluid-Gimbal Head VERTICAL ARM HORIZONTAL BAR SPECIFICATIONS: FG-02 Load Capacity...50 pounds (23kg) Damped Load Capacity...15 pounds (6.8kg) Pan & Tilt
All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,
Gripper Car Sucti on Mount G-10 I NSTRUC TI ON MANUA L All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic,
PORTA-JIB EXPLORER. Jib Arm details and assembly instructions
Our lightest, most versatile Jib for camera systems with front weight of 22 lbs (10 kg.) or less. Canon 7D Camera with matte box, follow focus, external battery, Marshall monitor, balanced monitor bracket,
JIB EPT USER MANUAL. Please read this manual carefully before using the Alphatron JIB ETP unit! JIB & MOTORISED PAN AND TILT UNIT
JIB EPT JIB & MOTORISED PAN AND TILT UNIT USER MANUAL EN Please read this manual carefully before using the Alphatron JIB ETP unit! Thank you for purchasing a Alphatron product The EPT head is developed
SAVE THESE INSTRUCTIONS
and Height Mounts Assembly, Installation and Operating Instructions Model Nos. QL, QLA, ARM250, QLM6 and QLAM6 NOTE: Check all parts for shipping damage. In case of shipping damage, DO NOT use. Contact
CLIMB2 DUAL MONITOR SIT/STAND WORKSTATION
CLIMB2 DUAL MONITOR SIT/STAND WORKSTATION CLIMB2 Rev A 3/17 Model CLIMB2-SLV ASSEMBLY AND ADJUSTMENT CLIMB2 PARTS AND TOOLS PLEASE REVIEW these instructions before beginning the assembly and adjustment
User Manual. Setup and Adjustment
User Manual Setup and Adjustment Easyrig 3 with Gimbal Rig Specifications Model of Easyrig 1/4 in. screw-holder Suspension line Camera hook Serial no. Side support adjustment Support arm Adjustment knobs
PV Series. Owner s Manual. Photo Tripod
PV Series Owner s Manual Photo Tripod Thank you for choosing Magnus. Congratulations on the purchase of your new Magnus tripod. This tripod features an adjustable center column for smooth and precise camera
PROFESSIONAL CAMERA SUPPORT
PROFESSIONAL CAMERA SUPPORT CARTONI / All rights reserved User Manual Version: 2.1 Issue date: Feb 2017 CARTONI S.p.A. Via di Portonaccio, 33/B 00159 - Rome (Italy) phone. +39 06 4382002 fax. +39 06 43588293
BELLY CRUZER DSLR Steady Camera Rig (FC-BC-DSR)
BELLY CRUZER DSLR Steady Camera Rig (FC-BC-DSR) Setup and Operational Manual All rights reserved No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or
RS-600AF RS-850AF RS-1200AF. Camera. Track Slider. With Adjustable Feet
Camera Track Slider With Adjustable Feet RS-600AF RS-850AF RS-00AF Congratulations on your purchase of the Revo Camera Track Slider. Revo s camera track slider is a sturdy, portable, and lightweight mini
Model 7035 Clamp-On Half Rails OPERATOR S MANUAL
Model 7035 Clamp-On Half Rails OPERATOR S MANUAL NOTE: Check ALL parts for shipping damage. If shipping damage is noted, DO NOT use. Contact medical equipment provider for further instruction. Index 1.
R e f U S U S E R M A N U A L
TROLLEY UNIT R e f. 7 5. 4 1. 0 3 0 U S U S E R M A N U A L Ref: 99.34.11US rev.01 Last update May 2010 CAUTION: Federal law (USA) restricts this device to sale by or on the order of physician Copyright
EVOLVE1-M MONITOR ARM
EVOLVE1-M MONITOR ARM EVOLVE1-M Rev A 2/17 Model EVOLVE1-M-SLV Model EVOLVE1-M-BLK Model EVOLVE1-M-WHT ASSEMBLY AND ADJUSTMENT EVOLVE1-M MONITOR ARM PARTS AND TOOLS PLEASE REVIEW these instructions before
BC Series. Dual Action Ballhead. You re on steady ground
BC Series Dual Action Ballhead You re on steady ground 1 Introduction Thank You for choosing Oben! This sturdy Oben BC Series Dual-Action ballhead provides smooth, precise operation. Two locks provide
CAMTREE HUNT GRAND DSLR CAMERA CAGE (CH-GRND-C) INSTRUCTION MANUAL
CAMTREE HUNT GRAND DSLR CAMERA CAGE (CH-GRND-C) INSTRUCTION MANUAL All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,
Orion Deluxe Off-Axis Guider
instruction Manual Orion Deluxe Off-Axis Guider #5521 Providing Exceptional Consumer Optical Products Since 1975 Customer Support (800) 676-1343 E-mail: support@telescope.com OrionTelescopes.com Corporate
PROFESSIONAL CAMERA SUPPORT
PROFESSIONAL CAMERA SUPPORT CARTONI / All rights reserved User Manual Version: 2.1 Issue date: Feb 2017 CARTONI S.p.A. Via di Portonaccio, 33/B 00159 - Rome (Italy) phone. +39 06 4382002 fax. +39 06 43588293
DSLR KIT-3 BONUS PRO ZOOM SET UP AND OPERATION MANUAL
DSLR KIT-3 BONUS PRO ZOOM SET UP AND OPERATION MANUAL All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic,
PROFESSIONAL CAMERA SUPPORT
PROFESSIONAL CAMERA SUPPORT CARTONI / All rights reserved User Manual Version: 2.0 Issue date: May 2016 CARTONI S.p.A. Via di Portonaccio, 33/B 00159 - Rome (Italy) phone. +39 06 4382002 fax. +39 06 43588293
Instruction Manuall. Flowcam Series. Professional dual-arm Camera Stabilizer System 5-15 lbs
Flowcam Series Professional dual-arm Camera Stabilizer System 5-15 lbs Instruction Manuall Please read the instruction manual thoroughly before operating your aviator stabilizer for the first time to avoid
Sit-Stand Monitor Arm
Sit-Stand Monitor Arm Product ID: ARMSTSCP1 This sit-stand monitor arm transforms your desk or tabletop into an ergonomic workstation. The monitor arm features a keyboard tray and easy height adjustment
NEW_genus_8pp_A4_V2:0 25/10/10 15:07 Page 1 GL GMKULT/DSLR GL G-SFOCDSLR GL GMKKULT/3 GL GMKDEL/3 GL GMKDSLR GL G-BFOCS GL G-SFOCS
NEW_genus_8pp_A4_V2:0 25/10/10 15:07 Page 1 GL GCSMK Camera Shoulder Mount System Kit GL GMKBAS Matte Box Basic Kit GL GMKSUP Matte Box Superior Kit GL GMKDEL/3 Matte Box Delux Kit GL GMKKULT/3 Matte Box
24KO VARIO INSTRUCTION FOR MOBILE PROJECTION SCREENS VARIO 32 AND VARIO 64
24KO VARIO INSTRUCTION FOR MOBILE PROJECTION SCREENS VARIO 32 AND VARIO 64 CENTRE SUPPORT Consists of plug in elements with interlocking and safety bolts. Adaptable to any frame size FOLDABLE LEGS Standard
Advanced Camcorder Support System
Balanced and stable shooting platform Reduces fatigue on long shoots Camera feels weightless, control is effortless Allows a wide range of professional shooting techniques Advanced Camcorder Support System
GLIDECAM CAMCRANE 200TM. Set-up and Operations Guide
GLIDECAM CAMCRANE 200TM Set-up and Operations Guide Glidecam Industries, Inc. 23 Joseph Street, Kingston, MA 02364 Customer Service Line (781) 585-7900 Manufactured in the U.S.A. COPYRIGHT 2000-2008 GLIDECAM
TH ST N OAK PARK HEIGHTS, MN P F
12430 55 TH ST N OAK PARK HEIGHTS, MN 55082 P 651-342-1756 F 651-342-1293 INFO@DIACRO.COM SAFETY INFORMATION PG. 3 TECHNICAL DATA PG. 3 FORMING CIRCLES PG. 4 SHAPING METAL PG. 5 #24 ROLLER BREAKDOWN AND
USB-FC-110 LYNX USB FOCUS CONTROLLER USER MANUAL
USB-FC-110 LYNX USB FOCUS CONTROLLER USER MANUAL 2 INTRODUCTION Thank you for choosing the Elvid Lynx USB Focus Controller. The Elvid Lynx gives you remote control over focus and exposure (including shutter
Power Series Camera Support
Power Series Camera Support Power Jib Power Column Power Dolly Power Series Camera Support Equipment Assembly Manual Remark: Before assemble the jib, please check the inventory and read this manual carefully
MK-2000 MASONRY ELECTRIC SAW SERIES OWNER'S MANUAL, OPERATING INSTRUCTION, & PARTS LIST
www.mkdiamond.com MODELS PART # MK-2001SV 11195 MK-2002 150598 MK-2002-1 150598-1 MK-2000 MASONRY ELECTRIC SAW SERIES OWNER'S MANUAL, OPERATING INSTRUCTION, & PARTS LIST Revision 301 07.2018 Manual Part
PSA200 User s Manual
2011 Visionary Solutions, Inc. All rights reserved. Please visit the support section of our website at www.vsicam.com for manuals, other documentation, and software downloads. Visionary Solutions, Inc.
C-pan arm USERS INSTRUCTIONS
C-pan arm USERS INSTRUCTIONS Designed 1 of 12 and made in Denmark Thanks for purchasing a 9.Solutions product. With great passion, we design our products to be as versatile as possible. We hope that our
Camera support for DSLR cameras and handheld camcorders
Camera Support Camera support for DSLR cameras and handheld camcorders > Provides stability, balance and support > Distributes the weight of the camera set-up evenly across the body > Reduces fatigue on
MK-101 TILE SAW OWNER S MANUAL, PARTS LIST & OPERATING INSTRUCTIONS
www.mkdiamond.com MK-101 TILE SAW OWNER S MANUAL, PARTS LIST & OPERATING INSTRUCTIONS Part # 151991 Revision 113 02.2018 Manual Part# 153754 Caution: Read all safety and operating instructions before using
MD-BD13B / DUAL SEGMENT TWIN-ARM. For (33-69 cm) LCD desktop computer monitors. User Manual
MD-BD13B / DUAL SEGMENT TWIN-ARM MONITOR mount For 13 27 (33-69 cm) LCD desktop computer monitors User Manual Thank you for choosing Gabor. The Gabor MD-BD13B mounts two 13 27 (33 69 cm) LCD computer monitors
MK-101 TILE SAW OWNER'S MANUAL, PARTS LIST & OPERATING INSTRUCTIONS
www.mkdiamond.com MK-101 TILE SAW OWNER'S MANUAL, PARTS LIST & OPERATING INSTRUCTIONS MK-101 Part # 167979 Part # 151991-SP Revision 116 08.2018 Manual Part No. 168237 Caution: Read all safety and operating
GH-50. Gimbal Head. You re on steady ground
GH-50 Gimbal Head You re on steady ground 1 INTRODUCTION Thank You for choosing Oben! The Oben GH-50 is a gimbal-type tripod head designed to balance a lens along its vertical and horizontal axes. Ideal
Boxer HD-2X Motorized Pan Tilt Head (P-BXR-HD-2X)
Boxer HD-2X Motorized Pan Tilt Head (P-BXR-HD-2X) I N STR UC TI ON MANUAL All rights reserved No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by
STEDDIEPOD. Instruction Booklet
STEDDIEPOD Instruction Booklet The STEDDIEPOD is easy to setup and use, this booklet is your guide to help you get started so you can get those fantastic shots right now! Ph. 818-982-7775 BarberTVP.com
operating instructions
operating instructions contents INTRODUCTION Legal Notice 02 CE Mark 02 Included in Box 02 Introduction 03 Safety Notes 03 UNIT OVERVIEW Unit Overview 04/05 OPERATION Power Options 06 Operation 07 SPECIFICATIONS
The Ridgeview Tripod. Your Ridgeview TM tripod is a mid-size field-packing tripod with a ball head for fast operation. Quick-Release Plate
The Ridgeview Tripod Your Ridgeview TM tripod is a mid-size field-packing tripod with a ball head for fast operation. Plate Center Column Collar Compact Ball Head Bubble Level Compass Foam Padding Leg
MK-MANTA III OWNER S MANUAL PARTS LIST & OPERATING INSTRUCTIONS
www.mkdiamond.com MK-MANTA III OWNER S MANUAL PARTS LIST & OPERATING INSTRUCTIONS Revision 202 08.2012 Manual Part# 161117 Caution: Read all safety and operating instructions before using this equipment.
Flycam Flowline Steady Camera Support Rig 1. Instruction Manual FLOWLINE STEADY CAMERA SUPPORT RIG (FLCM-FLN)
Flycam Flowline Steady Camera Support Rig 1 Instruction Manual FLOWLINE STEADY CAMERA SUPPORT RIG (FLCM-FLN) All rights reserved No part of this document may be reproduced, stored in a retrieval system,
Paoloni Rip Kit Installation Instructions
Paoloni Rip Kit Installation Instructions Please note this installation kit is designed for installation only on Paoloni P150, P260, P300 Sliding Table Saws, rip fence. Accurate Technology manufactures
MD-BSL15W / SPRING-LOADED TWIN-ARM. For ( cm) LCD desktop computer. User Manual
MD-BSL15W / SPRING-LOADED TWIN-ARM MONITOR mount For 15 27 (38.1 68.6 cm) LCD desktop computer User Manual Thank you for choosing Gabor. The Gabor MD-BSL15W mounts two 15 27 (38.1 68.6 cm) LCD computer
Meet the New and Improved GorillaPod Line! In 2006, JOBY revolu2onized crea2vity with the first ever flexible tripod, the GorillaPod.
Meet the New and Improved GorillaPod Line! In 2006, JOBY revolu2onized crea2vity with the first ever flexible tripod, the GorillaPod. Now, with over 10 million sold, we ve made them even beier with new
Holz-Her Sliding Table Saw Kit Installation Instructions: For 1243 Rip Kits
Holz-Her Sliding Table Saw Kit Installation Instructions: For 1243 Rip Kits Please note this installation kit is designed solely for installation on Holz-Her Sliding Panel Saws, Model 1243 (may also fit
Dual Monitor Sit-to-stand Workstation
Dual Monitor Sit-to-stand Workstation Product ID: BNDSTSDUAL This dual-monitor sit-to-stand workstation lets you enhance your productivity and comfort, by giving you a dual-display work space that s easy
Feed Screeners. Model 90 Screener: Model 108 Screener: Model 125 Screener: Manufactured until 3/2002
Back Home FLEX-AUGER Repair Parts Model 90 Screener: 25895 Model 108 Screener: 34347 Model 125 Screener: 25712 Manufactured until 3/2002 25895 34347 25712 25895 34347 25712 Model 90 Model 108 Model 125
Breeze Film Shooting Equipment (P-W5P-BRZ) I N STR UC TI ON MANUAL
Breeze Film Shooting Equipment (P-W5P-BRZ) I N STR UC TI ON MANUAL All rights reserved No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,
Go from sit to stand, with one touch. Dual Monitor Sit-to-stand Workstation. StarTech ID: BNDSTSDUAL
Dual Monitor Sit-to-stand Workstation StarTech ID: BNDSTSDUAL This dual-monitor sit-to-stand workstation lets you enhance your productivity and comfort, by giving you a dualdisplay work space that s easy
LIGHTWEIGHT TRIPOD 190D, 190CL, 190PRO, 190NAT3, 190MF3, 190MF4 SUGGESTED HEADS. Ball Head. Two way Head. Three Way Head. Geared Head 390RC2 460MG
Harry De Zitter LIGHTWEIGHT TRIPOD 190D, 190CL, 190PRO, 190NAT3, 190MF3, 190MF4 SUGGESTED HEADS Ball Head Three Way Head Geared Head Two way Head 484 460MG 410 390RC2 484RC2 056 390RC2NAT 486 115 700RC2
Owner s Manual Dual Vertical Flat Screen Desk or Clamp Mount
Owner s Manual Dual Vertical Flat Screen Desk or Clamp Mount MODEL: DDR1527SDC CAUTION: DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY. SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR! 75 x 75 100 x 100 27 MAX
If you are missing any of the following items, please contact Stanton Video immediately (602)
RIGHT ANGLE FOCUS Jan 03 If you are missing any of the following items, please contact Stanton Video immediately (602) 493-9505 1. Right Angle Focus Servo 2. Servo End Cap 3. Lens Gears (32 pitch, 48 pitch,.6
MK-101 TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS SERIAL NUMBER:
MK-0 TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS CAUTION: Read all safety and operating instructions before using this equipment Enter the Serial Number of your new saw in the space below. The Serial
MK-MANTA III OWNER S MANUAL PARTS LIST & OPERATING INSTRUCTIONS
www.mkdiamond.com MK-MANTA III OWNER S MANUAL PARTS LIST & OPERATING INSTRUCTIONS Revision 07.07 Manual Part# 67 Caution: Read all safety and operating instructions before using this equipment. This parts