Picture Rail. Designed for any space where artworks go on walls, from galleries and public buildings to offices, shops, and residences.

Transcription

1 The Picture Rail lineup for buildings of many types: commercial facilities, public facilities, museums, galleries, and residences. Versatile solutions for displaying pictures beautifully on walls without making screw hole. A simple design that easily adapts to any type of interior space and promises high safety. Can be selected a Picture Rail that slides up and down for picture display at any height.

2 Picture Rail consists of three parts: a rail, hook, and hanger (a combination of a hanger hook and wire). Pictures can be mounted on wall surfaces nondestructively with dedicated hangers. Designed for any space where artworks go on walls, from galleries and public buildings to offices, shops, and residences. Basic Construction of Picture Rail (One-touch type) Rail (Standard type) Rails Two basic rail types are available: one for ceiling attachment and one for wall attachment. Either type can be embedded in a ceiling or wall as a prefabricated rail or attached to an existing ceiling or wall as a retrofitted rail. Available in many variations to suit the size and weight of the artworks and type of Picture Rail mounting selected. Special mounting brackets should be used according to the assembly conditions. s The hooks come in many different designs. The before-fitted hook slides from the end of the rail before the end-cap is attached. The after-fitted hook is pushed into the rail groove after the rail is installed. The fixed type is fixed to the rail with the built-in screw on the hook body. The hooked type simply hooks to the rail. The one-touch type connects directly with the hanger. The Carabiner-fitted type has a drop-prevention function. Select the hook best suited to the Picture Rail you are installing. Select the best type for the intended usage and the weight of the article to be hung, from heavy to lightweight. Two mounting methods are available: standard type and one-touch type. Standard Type When using a standard-type hook, catch the loop part of the hanger on the hook as shown in the illustration. The carabiner-fitted type safeguards against falling articles when earthquakes strike. This is a recommended feature for public buildings or any other space visited by large numbers of people. (Body) One-touch Type When using a one-touch hook, insert the straight hanger from the insertion hole of the hook as shown in the illustration until the tip of the wire hits the top of the hook. To unplug the wire, push the button and pull the wire out. Position of the *Pass the wire end through the hole at the bottom of the. While pushing the button Slide the hanger hook up and down while depressing the hanger hook button. Before hanging the picture, confirm that the hook is locked and *The hook can move up even when locked. 2

3 Precautions for Installation If the wire comes into contact with hanging articles or building elements such as walls or pillars, it may become damaged or lose strength after many years of use. Take steps to stop the wire from directly contacting wall surfaces, hanging artworks, etc. Precautions for Use Periodically make sure that the hanger is free of damage. If the wire is frequently bent or twisted, the strands of the Yanking the wire or handling it carelessly with your bare hands can cause unexpected finger injuries. Always be If the hanger hook button ceases to push in smoothly after many years of use, accumulated dust or rust might be interfering with the Do not let children play freely around these products. If a hook or wire is yanked or rocked deliberately, it could damage the hanging These products are designed for hanging artworks or other articles for display. Never let children dangle themselves or pets with the Wire strands at the tips of frayed wire may pierce fingertips or other body parts. Pay attention when handling to avoid unexpected injury. Button 3

4 The Concept of Allowable Load When using Picture Rail T-1 allowable load: wall attachment 20 kg (44 lb), ceiling attachment *Allowable load depends on the product and construction method. *Install the product to suit the load and other conditions for wall and ceiling attachment. CASE 0 1 If hanging more than one article with one hanger, the combined allowable load is. CASE 0 2 If using more than one hanger to hang an article, hang with no more than two hangers and do not exceed a load of. in the same way.) Correct Wrong Correct Wrong T 30A T 30A T 30A T 30A T 30A T 30A T 30A 20kg 20 kg 10 kg 20 kg Hang with no more than two hangers]] [Hanging one picture with three hangers can be dangerous: deviations in the hanging position can disrupt balance and case pictures to fall.] CASE 0 3 If system components (rail, hook, etc.) with different allowable loads are used in combination, the smallest allowable load applies. CASE 0 4 If installing Rail T-1 on a wall attachment, the allowable load is 20 kg (44 lb). Correct Wrong Wrong T 30A 15 ( / 33 lb) T 30A 15 ( / 33 lb) T 30B (30kg / 66 lb) 20 kg (44 lb) [Different allowable loads for system components used in combination: rails and hooks each, hangers.] [Wall attachment of the Rail T-1] CASE 0 5 When using plural hooks and hangers: if the total allowable load is within and the interval T 30A T 30A T 30A T 30A 10 kg (22 lb) Correct 10 kg (22 lb) Wrong 10 kg (22 lb) 10 kg (22 lb) 20 kg (44 lb) 4 prevent picture frames from colliding with each other during earthquakes, etc.

5 CASE 0 6 Never install the rail at a tilted angle. For even higher safety and security. Wrong Ideal exhibition T 30A (30kg / 66 lb) G 70A (70 kg / 154 lb) G + (70 kg / 154 lb) 20 kg (44 lb) 70 kg (154 lb) CASE 0 7 The specifications for a curved rail are the same as those for a straight rail. T 30A (30kg / 66 lb) Correct Enhance the safety of your exhibition Even when hanging an article from two hangers, the maximum allowable load is 70 kg (154 lb). If unexpected trouble arises when hanging an article, the whole load may tilt to one side and cause a large accident. Never hang an article heavier than the allowable load of a single hanger, even when using two hangers. Appropriate exhibition intervals When hanging plural articles side by side, consider how they may shake during an earthquake. We recommend hanging more than more than 5

6 Combination Table of Picture Rail Components Allowable Load Product Series Picture Rails For heavy-weight articles For middle-weight articles Galleries/Commercial facilities/educational facilities/medical facilities 70 kg (154 lb) G SERIES T SERIES G-1 T-1 T-4N G-2 G-3 T-2N T-3N T-5 TC-10 Residences L SERIES L-1 L-3 L-5 6 Halls The G series hangs large articles of up to 70 kg (154 lb) in halls with high ceilings. Offices Available for installation on curved surfaces such as pillars. High-spec Picture Rail with an allowable load of up to.

7 Corresponding components (s, Roller s, s) are listed for each type of rail. See the list of product choices. *If using a hook and hanger with different allowable loads in combination, the smaller allowable load is the maximum allowable load. *The allowable load may change, depending on the type of structural reinforcement. : Recommended combination products s, Components s G 70A (with carabiner) 70 kg *No available for G-3 (154 lb) G 70B (with carabiner) 70 kg *No available for G-1 and G-2 (154 lb) G (Body) 70 kg (154 lb) Wire for G T 30A T 30B T 30C T/TC 30F T/TC 30G (with carabiner) T/TC 30H (with carabiner) 15 *No available for TC-10 *No available for T-4N and TC-10 *No available for TC-10 *No available for T-4N T Roller 30A T Roller 30B L 15A L 15B L 15C L 15D A *No available for TC-10 *No available for T-4N and TC-10 *No available for TC-10 *No available for T-4N and TC-10 *No available for TC-10 *No available for T-4N and TC-10 T/TC One-touch 30A T/TC One-touch 30B Straight *No available for T-4N *Available for T/TC One-touch only L 15A L 15B L 15C L 15D 15 Galleries For a lease contract with a gallery, shop, or medical facility, the high-spec Picture Rail T series with an allowable load of is recommended. Halls T Series, for hanging plural articles with one hanger. 7

8 Picture Rail G Series G-1 / G-2 / G-3 Perfect display-dedicated rails for large exhibitions at spaces such as of artworks on display. Product Lineup G Series G-1 G-2 G-2 () + G 70A (Add-on rail for wall) + G 70B Rail Section G Series 17.6 mm 13.6 mm G-1 G-2 30 mm 30 mm 30 mm 11 mm 17.6 mm 22 mm 17.6 mm 8

9 Unique Features G Series Rails Attaches to a wall and ceiling via dedicated metal fittings or other types of metal fittings. Add-on rail for wall Attaches to a wall in its existing condition. Product Name G-1 G-2 G-3 Color s Two types for G series. G 70A (ceiling attachment) G 70B (wall attachment) with a built-in drop-prevention mechanism (carabiner). The hook attached with fall prevention function (carabiner). Suitable for use in public facilities where stringent measures are Suitable to use in public facilities by taking measures against fall required to prevent falling articles during earthquakes. prevention in the earthquake. Side view Front view Side view Front view 16 mm ( 70 kg (154 lb) 70 kg (154 lb) 16 mm ( 30 mm 23 mm 53 mm 10 mm 5.5 mm 16 mm 39 mm 23 mm 10 mm 5.5 mm *Not available fo G-1 and G-2. for G series. easy to be set and removed. Available in combination with the G (Body). G (Body) Side view Front view 10.5 mm (.41 5 mm (.20 2m 35 mm 59 mm *Optional 21 mm (.83 *Allowable load is 70 kg (154 lb). *This hanger type can be used in pairs to hang single articles. *Please order the number of G (Body) you will require. *Allowable load is 70 kg (154 lb). *Equipped with a carabiner. *This hanger type can be used in pairs to hang single articles. Ideal exhibition G 70A (70 kg / 154 lb) G + (70 kg / 154 lb) For even higher safety and security. To enhance the safety of your artworks allowable load must never exceed 70 kg (154 lb). the whole load may tilt to one side and cause a large accident. Appropriate space between pictures arthquakes. We recommend hanging articles at intervals of at least 70 kg (154 lb) more than more than 9

10 Allowable Load G Series Picture Rails s and Product Allowable Load Product Allowable Load G-1 G-2 G-3 70 kg (154 lb) 70 kg (154 lb) 70 kg (154 lb) G 70A G 70B G + for ceiling attachment for wall attachment for ceiling attachment for wall attachment 70 kg (154 lb) 70 kg (154 lb) 70 kg (154 lb) 70 kg (154 lb) Materials and Finishes G Series Product Color Material Finish Picture Rail G-1, G-2, G-3 G 70A 70B Body Body End Stop G-1, G-2, G-3 Aluminum alloy extrusion material SUS 303 SUS 304 Brass SUS 304 Aluminum alloy Alumite Satin finishing Satin finishing G Wire for G Product Color Material Finish Body Wire SUS 303 SUS 630 Stainless wire (SUS 304) Satin finishing Installation Dimensions and Installation Example G Series G-1 G- M8 anchor bolt Bracket mm Plug for concrete mm 30 mm Bracket mm ( Stud IT mm Bracket mm 30 mm 10

11 G-1 G- Joint bolt 100 Plug for concrete M8 Bracket mm (.87 7 mm Stud IT mm Stud Hanging bolt Bracket mm 30 mm steel 450 mm or less G-1 G- Add-on rail for wall Plug for concrete (separately) Plug for concrete (separately) 17.6 mm 30 mm 17.6 mm 30 mm 11

12 Picture Rail T Series T-1 / T-2N / T-3N / T-4N / T-5 / TC-10 Dedicated rails for display use. Allowable load. A simple design with two color variations to harmonize the aesthetics of your space. Recommended for displaying paintings and panels in commercial spaces. Product Lineup T Series T-1 T-2N T-3N T-1 T-2N T-3N T-4N T-5 TC-10 T-4N T-5 TC-10 T-1 (Add-on rail for wall) + T/TC 30F T-1 () + T/TC 30F T-3N () + T/TC 30F TC-10 () + T/TC One-touch 30A 12

13 Rail Section T Series T-1 T-2N T-3N 2 mm 2 mm 14.7 mm 29.5 mm 9.5 mm 5 mm 26.5 mm 9.5 mm T-2N T-3N 2 mm 5 mm 12.5 mm 12.5 mm 29.5 mm 2 mm 26.5 mm 2 mm T-4N T-5 TC mm 22 mm 3m 9.5 mm 3 mm 14.5 mm 28.3 mm 3 mm 16.9 mm 20.9 mm 9.5 mm 5.1 mm 14.6 mm TC mm 12.5 mm 14.6 mm 20.9 mm 13

14 Unique Features T Series Rails Two types of rail are available, retrofitted and prefabricated. Each type comes in two color variations. Add-on rail The type to be attached to existing wall or ceiling surfaces. Built-in rail Embeds in a wall or ceiling surface. *Available in two thicknesses to match the thickness of the wall board, Product Name Color T-1 T-5 T-2N Also used as a ceiling cornice. T-3N T-4N Also used as a ceiling cornice with a projecting bracket. TC-10 s Six types of hook are available in the dedicated T series. T 30A (ceiling attachment) *1 T 30B (wall attachment) *2 Fixed, add-on type, For T-1, T-2N, T-3N, T-4N and T-5 ed, add-on type, For T-1, T-2N, T-3N and T-5 Side view Front view Side view Front view 7.5 mm (, *Not availavle for TC mm ( (.47, *Not availavle for T-4N and TC-10. (.47 T 30C (ceiling attachment) *2 ed, built-in type, (66lb) For T-1, T-2N, T-3N, T-4N and T-5 T /TC 30F ( The hook can be used as both a ceiling and wall attachment. ed, add-on type, (66lb) For T-1, T-2N, T-3N, T-4N, T-5 and TC-10 Side view of ceiling attachment Front view of ceiling attachment Side view, *Not availavle for TC-10. Front view Side view of wall attachment Front view of wall attachment ( (.39, *The hook part is silver. (.24 ( T/TC 30G (ceiling attachment) T/TC 30H (wall attachment) Fitted with a fall-prevention mechanism (carabiner). Safeguarded by anti-earthquake mechanisms suitable for use in public facilities. ed, add-on type, ed, add-on type, For T-1, T-2N, T-3N, T-4N, T-5 and TC-10 For T-1, T-2N, T-3N, T-4N, T-5 and TC-10 Side view Front view Side view Front view (.24 (.24, *The hook part is silver., *The hook part is silver. 14 *T series s cannot be used for the Picture Rail L series. *1: Fix the hook firmly by turning the root of the hook. *2: The hook can be fixed by the weight of the hanging article (load). *L series s can be used for the Picture Rail T series. Note, however, that the allowable load is limited to.

15 Roller s Two types of Roller are available in the dedicated T series. T Roller 30A (ceiling attachment) T Roller 30B (wall attachment) Movable, built-in type, For T-1, T-2N, T-3N, T-4N and T-5 Side view Front view 26.5 mm ( Movable, built-in type, For T-1, T-2N, T-3N and T-5 Side view Front view 3m 49 mm, *Not availavle for TC m, *Not availavle for T-4N and TC *The hook can be moved when the hanging article is removed. The T and TC Series can also be used as dedicated hangers. Attached drop-prevention mechanism (carabiner). (1000, 1500, 2000, 2500 and 3000) Plural s can be attached on one wire of or Straight (optional). Fitted with a drop-prevention mechanism (carabiner). (Body) For T series Button Wire 69 mm *Allowable load:. *Cannot be used with the L. *Press in the button of the hook part while sliding the hanger up and down. *Dedicated component for and Straight. Cannot be used with other hangers or wires. One-touch s Use in combination with Straight (optional). T/TC One-touch 30A (ceiling attachment) T/TC One-touch 30B (wall attachment) ed, add-on type, For T-1, T-2N, T-3N, T-4N, T-5 and TC-10 ed, add-on type, For T-1, T-2N, T-3N, T-5 and TC-10 The wire insert type, not only simple-looking but effectively prevents falling articles. Side view Front view Side view 11 mm Front view 31 mm 23 mm Straight Use in combination with the T/TC One-touch 30A/30B (optional). Button Wire 15

16 Installation Interval and Allowable Load T Series (in the case of T-4N, use the bracket 35/55/80.) At least three mounting screws should be attached (more than 2-pitch) at Allowable Load of Picture Rails (Table 1) Within Within Within Rail Plural hooks can be used when the total allowable load is less than and the interval between hooks See the allowable load for the Rail / / (Tables 1 and 2). Within *Plural hooks can be hung when the total allowable load is within and the *Even when hanging a picture with two hangers, the allowable load is at maximum. If unexpected trouble occurs during installation, the whole load may tilt to one side and cause a major accident. Remember that the maximum allowable load for a single hanger applies even when hanging a picture with two hangers. *While more than one picture can be hung, we recommend that you allow a sufficient frames during earthquakes, etc. Notes on installation Picture Rails should be installed on wall surfaces with firm structural support. The allowable load for Picture Rail depends on the product and installation method. (Table 1) (Table 1) shows the allowable load when Picture Rail is If Picture Rail is attached to a lightweight ceiling material such as a double ceiling joist (t = 0.5 mm) or lightweight ), the allowable load is 10 kg (22 lb). The allowable loads for the Picture Rail, hook, and hanger differ. When using them in combination, follow the specs shown in Table 2. Add-on rail Built-in rail T-2N T-3N Product Name T-1 T-5 T-1 T-4N TC-10 Allowable Load of s and s (Table 2) T T/TC 30G for ceiling attachment s 30H for wall attachment T Roller 30A for ceiling attachment 30B for wall attachment T/TC 30A for ceiling attachment One-touch 30B for wall attachment A s E 15 30A for ceiling attachment 30B for wall attachment Installation Method Wall Attachment Ceiling Attachment 20 kg (44 lb) *1 *1 20 kg (44 lb) *1 *1 *2 *1 *3 (optional) and wing nut (optional). load is 10 kg (22 lb). Product Name Allowable Load Weight limit when used in combination with Picture Rai 20 kg (44 lb) or less, if using for T-1. 30C for ceiling attachment 30F for ceiling and wall attachment common 20 kg (44 lb) or less,if used for wall attachment. 20 kg (44 lb) or less, if using for T kg (44 lb) or less, if using for T kg (44 lb) or less, if using for T kg (44 lb) or less, if used for wall attachment of T-1. Materials and Finishes T Series Product Color Material Finish Picture Rail T-1, T-2N, T-3N, T-4N, T-5, TC-10 T 30A 30B 30C T/TC 30F 30G 30H Wheel T Roller 30A 30B Wheel T/TC One-touch 30A, 30B Body Body Wheel Wheel Aluminum alloy extrusion material Brass SUS 304 Brass SUS 304 Brass SUS 304 Brass SUS 304 Brass Steel Brass Steel Brass SUS 304 SUS 304 Alumite Alumite white Nickel plating Nickel plating Nickel plating Satin finishing nickel plating Product Color Material Finish End Stop Polyethylene T-1 End Stop TC-10 End Stop L-1 Polypropylene Polyacetal End Stop Aluminum alloy T-2N, T-3N, T-4N, T Straight Body Wire Wire SUS 304 SUS 304 (SUS 304) (SUS 304) 16

17 Installation Dimensions and Installation Example T Series T- wall / Add-on rail for wall part part depth: or more 450 mm or less Light gauge steel wall / Add-on rail for wall Stud wall / Add-on rail for ceiling part part depth: 450 mm or less wall / part Add-on rail for ceiling Add-on rail for ceiling Plug for concrete (separately) part depth: 450 mm or less 450 mm or less wall / part Light gauge steel wall / Stud part depth: or more 29.5 mm 29.5 mm 9.5 mm 29.5 mm (Using reinforcement plate) C shape steel + bolt / C shape steel (separately) 29.5 mm Reinforcement plate 29.5 mm 29.5 mm 1.6 mm wall / part Light gauge steel wall / Stud part depth: 15 mm 29.5 mm 29.5 mm 12.5 mm 29.5 mm (Using reinforcement plate) C shape steel + bolt / C shape steel (separately) 29.5 mm Reinforcement plate 29.5 mm 29.5 mm 1.6 mm 17

18 wall / part Light gauge steel wall / Stud part depth: or more 9.5 mm 5 mm (Using reinforcement plate) C shape steel + bolt / C shape steel (separately) 2 mm 5 mm Reinforcement plate 2 mm 5 mm 2 mm 5 mm 1.6 mm wall / part Light gauge steel wall / Stud part depth: or more 12.5 mm 2 mm (Using reinforcement plate) C shape steel + bolt / C shape steel (separately) 18 T-4N 2 mm 5 mm (Bracket 55) M8 anchor bolt 57 mm ( mm 0 40 mm (0 1.6 T-4N Dedicate Bracket Bracket mm ( mm (.87 3m (1.3 Reinforcement plate 27 mm (1.1 3 mm ( mm (.47 2 mm 5 mm Bracket 35 Bracket 55 Bracket 80 [Bracket slide range] *[Bracket slide range] Adjustable from the wall up to 12 mm 57 mm 32 mm 9 mm ( mm 2.9 mm ( mm 1 *[Bracket slide range] Adjustable from the wall up to 31 mm 57 mm 32 mm 9 mm ( mm 2.9 mm ( mm 36 mm (1.4 *[Bracket slide range] Adjustable from the wall up to 56 mm 2 mm 5 mm 57 mm 32 mm 9 mm ( mm 5 mm ( mm 60 mm ( mm C shape steel 27 mm (1.1 3 mm ( mm ( mm (.87 3m (1.3 *Depending on the wall finish, the mount position is adjustable by sliding each bracket. Slide range

19 wall / Add-on rail for wall Light gauge steel wall / Add-on rail for wall wall / Add-on rail for ceiling Add-on rail for ceiling Add-on rail for ceiling part part depth: or more 28.5 mm ( or less Stud 28.5 mm ( mm part 28.5 mm (1.1 part depth: or more 14.5 mm Double clip 14.5 mm 28.5 mm ( mm (1.1 Plug for concrete 14.5 mm wall / (Both collars) Joist foundation / (One side collar) Joist foundation / (Both collars) Stud / (One side collar) part part depth: or more 16.9 mm ( mm ( mm 16.9 mm ( mm ( mm 20.9 mm ( mm ( mm ( mm ( mm ( mm (.82 wall / (Both collars) part part depth: or more 2.1 mm 16.9 mm ( mm ( mm ( mm ( mm Joist foundation / (One side collar) 16.9 mm ( mm (.82 Joist foundation / (Both collars) 16.9 mm ( mm (.82 Stud / (One side collar) 16.9 mm ( mm (.82 T 30A T 30B T 30C T/TC 30F (for ceiling attachment) T/TC 30F (for wall attachment) T/TC 30G 40 mm 21 mm ( mm (.91 (.83 (.75 (.83 (.91 (.91 T/TC 30H 8.1 mm (.32 T Roller 30A T Roller 30B 7 mm (.28 T/TC One-touch 30A T/TC One-touch 30B 11 mm (.43 1 ( mm 3m 1 (.71 2m (.94 1 ( mm ( mm (1.2 5 mm (.20 1m (.55 5 mm ( mm (.91 19

20 L-1 / L-3 / L-5 Most suitable Picture Rail for Simple design, easily to be adapted itself to the interior space. Recommended to display such as paintings, photographs, clock, etc. in the residence. Rail Section 2 mm 3 mm 2 mm 2 mm 3 mm 2 mm 28.3 mm 14.5 mm 26.5 mm 26.5 mm 2 mm 14.5 mm 3 mm

21 Unique Features Rails Two types of rail are available, retrofitted and prefabricated. Add-on rail The type to be attached to existing wall or ceiling surfaces. Built-in rail Embeds in a wall or ceiling surface. *To match the thickness of wall board, available two thickness types L-1 L-5 L-3 Product Name Also used as a ceiling cornice. Color s Fixed, add-on type, Side view Front view 12 mm Fixed, add-on type, Side view 15 mm Front view 13 mm 5 mm ( mm 30 mm 5 mm ( mm (.41 1m 21 mm m 3.5 mm (.41 1m m ed, built-in type, Side view Front view 12 mm ed, built-in type, Side view 6 mm Front view 12 mm 5 mm ( mm 30 mm 5 mm ( mm (.41 1m m 3.5 mm (.41 1m m 21 mm *Can not be used to A / E. Available dedicated hanger. dismounting. Available for additions. Attachable plural hooks on one wire. 35 mm 9 mm Not avilable for other hangers and wires..

22 Installation Interval and Allowable Load L Series At least three mounting screws should be attached (more than 2-pitch) Within Within Within Rail Plural hooks can be used when the total allowable load is less than and the interval between hooks See the allowable load for the Rail / / (Tables 1 and 2). Within *Plural hooks can be hung when the total allowable load is within and the *Even when hanging a picture with two hangers, the allowable load is at maximum. If unexpected trouble occurs during installation, the whole load may tilt to one side and cause a major accident. Remember that the maximum allowable load for a single hanger applies even when hanging a picture with two hangers. *While more than one picture can be hung, we recommend that you allow a sufficient frames during earthquakes, etc. Notes on installation Picture Rails should be installed on wall surfaces with firm structural support. The allowable load for Picture Rail depends on the product and installation method. (Table 1) (Table 1) shows the allowable load when Picture Rail is If Picture Rail is attached to a lightweight ceiling material such as a double ceiling joist (t = 0.5 mm) or lightweight partition material (stud t = 0.), the allowable load is 10 kg (22 lb). The allowable loads for the Picture Rail, hook, and hanger differ. When using them in combination, follow the specs shown in Table 2. Allowable Load of Picture Rails (Table 1) L-3 *1: furring strips, with concrete reinforcement. If installed on a lightweight partition material (stud t = 0.8 *2: load is 10 kg (22 lb). Allowable Load of s and s (Table 2) s Product Name L-1 L-5 L 15 Product Name A B C D Installation Method Wall Attachment *1 Ceiling Attachment *2 for ceiling attachment for wall attachment for ceiling attachment for wall attachment Allowable Load s 15 Materials and Finishes L Series Product Color Material Finish Picture Rail L-1, L-3, L-5 Aluminum alloy extrusion material Alumite white Product Color Material Finish End Stop L-1 Polyacetal 15A Body Zinc die cast ABS resin End Stop T-1 End Stop T-3N, T-5 Polypropylene Aluminum alloy L 15B Body Zinc die cast ABS resin 15 Wire Stainless wire (SUS 304) 15C Body Zinc die cast Zinc die cast 15D Body Zinc die cast 15 (Body) Zinc die cast 22

23 Installation Dimensions and Installation Example L Series L-1 wall / Add-on rail for wall Light gauge steel wall / Add-on rail for wall wall / Add-on rail for ceiling Add-on rail for ceiling wall / Add-on rail for wall part Stud part part depth: part part depth: or more or less 14.5 mm Ceileng surface part depth: or more or less wall / part part depth: or more wall / or less Light gauge steel wall / Stud Light gauge steel wall / 2 mm 5 mm part part depth: or more or less Stud 2 mm 5 mm L-5 wall / Add-on rail for wall Light gauge steel wall / Add-on rail for wall wall / Add-on rail for ceiling Add-on rail for ceiling part Stud part part depth: part depth: or more 28.5 mm 28.5 mm 28.5 mm or less L 15A L 15B L 15C L 15D 28.5 mm 30 mm 41 mm 30 mm 41 mm 1m 21 mm 3.5 mm ( 1m 3.5 mm ( 1m 21 mm 3.5 mm ( 1m 3.5 mm ( 23

24 Picture Rail Parts Product Name Rail Length Color G Series G-1 G-2 G-3 T-1 T-2N T Series T-3N T-4N T-5 TC-10 L-1 L Series L-3 L-5 Product Code G-1 3 m G-2 3 m G-3 3 m T-1 with screw holes 3 m without screw holes 3 m T-2N / with screw holes T-2N / 12.5 mm with screw holes T-3N / with screw holes Picture Rails T-3N / 12.5 mm without screw holes with screw holes without screw holes T-4N with screw holes T-5 with screw holes TC-10 / with screw holes 3 m TC-10 / 12.5 mm with screw holes 3 m L-1 with screw holes 3 m without screw holes L-3 / with screw holes without screw holes L-3 / 12.5 mm with screw holes without screw holes WhIte L-5 with screw holes

25 Product Name Color G Series G-1 G-2 G-3 T-1 T-2N T Series T-3N T-4N T-5 TC-10 L-1 L Series L-3 L-5 Product Code G-1 Usable right and left commonly. * With 2 screws. * G-2 Usable right and left commonly. * With 2 screws. * G-3 Usable right and left commonly. * With 2 screws. * T Usable right and left commonly. * T-2N Usable right and left commonly. * T-2N (12.5 mm/ Usable right and left commonly. * T-3N Right * T-3N Left * End Stops T-3N (12.5 mm/ Right * T-3N (12.5 mm/ Left * T-4N Right * T-4N Left * T-5 Right * T-5 Left * TC-10 Usable right and left commonly. * TC-10 (12.5 mm/ Usable right and left commonly. * L-1 * Usable right and left commonly. Can be fixed by one screw. *

26 Product Name Color G Series G-1 G-2 G-3 T-1 T-2N T Series T-3N T-4N T-5 TC-10 L-1 L Series L-3 L-5 Product Code Bracket Bracket Bracket Bracket Bracket Brackets Splice Bolt Corner Splice Corner Splice for T-4N Splice Splice for T-4N Reinforcement Plate Set

27 and Parts Product Name Color G Series G-1 G-2 G-3 T-1 T-2N T Series T-3N T-4N T-5 TC-10 L-1 L Series L-3 L-5 Product Code G 70A with Carabiner * G 70B with Carabiner * Wire for G G with Carabiner * T 30A T 30B T 30C T/TC 30F Ceiling and wall attachment common * T/TC 30G with Carabiner * T/TC 30H with Carabiner * T Roller 30A T Roller 30B T/TC One-touch 30A T/TC One-touch 30B

28 Product Name Color G Series G-1 G-2 G-3 T-1 T-2N T Series T-3N T-4N T-5 TC-10 L-1 L Series L-3 L-5 Product Code Straight (Body) L 15A L 15B L 15C L 15D (Body) E