GENERAL DE SELLOS GENERAL MECHANICAL SEAL LIST TYPE 771D. Presión (pressure): Vacuum to 300 psig (20 bar)
|
|
- Joshua Evelyn Cook
- 5 years ago
- Views:
Transcription
1 GENERAL DE SELLOS GENERAL MECHANICAL SEAL LIST TYPE 771D SELLO DOBLE PARA TRABAJO PESADO HEAVY DUTY DOUBLE SEAL -20ºF to 450ºF (-29ºC up to 232ºC) dependiendo del material del o`ring 6000 fpm (30 m/s) 1
2 TYPE 650 SELLO SENCILLO UNIDIRECCIONAL SINGLE DIRECTIONAL SEAL Vacuum to 150 psig (10 bar) 3940 fpm (20 m/s) TYPE 580 SELLO ESPECIAL PARA BOMBAS FLYGT FLYGT PUMP SEAL Vacuum to 145 psig (10 bar) -22ºF to 392ºF (-30ºC to 200ºC) 980 fpm (5 m/s) TYPE 600 SELLO SENCILLO UNIDIRECCIONAL SINGLE DIRECTIONAL SEAL Vacuum to 150 psig (10 bar) 3940 fpm (20 m/s) TYPE 535 SELLO CARTUCHO PARA BOMBAS ANSI ROTARY SIMPLE CARTRIDGE SEAL 4000 fpm (20 m/s) TYPE 530 SELLO ROTATORIO PARA TRABAJO PESADO HEAVY DUTY ROTARY CARTRIDGE SEAL 4000 fpm (20 m/s) TYPE 521 SELLO PARA LA INDUSTRIA TEXTILERA TEXTILE INDUSTRY SEAL Up to 406 psig (28 bar) -22ºF to 392ºF (-30ºC to 200ºC) 2560 fpm (13 m/s) 2 TYPE 505 SELLO PARTIDO PARA BOMBAS Y AGITADORES SPLIT SEAL FOR PUMPS AND MIXERS Up to 200 psig (14 bar) Up to 250ºF (121ºC) 1 7/16 to 2 5/ Rpm 2 3/4 to 5 1/ Rpm
3 TYPE 500 SELLO PARA SERVICIO GENERAL GENERAL SERVICE ROTARY SEAL 4500 fpm (23 m/s) TYPE 500 ALI SELLO PARA TRABAJO PESADO EN MEDIOS MUY ABRASIVOS MECHANICAL SEAL FOR HEAVY WORK WITH SLURRIES 4500 fpm (23 m/s) TYPE 500 AL SELLO PARA SERVICIO GENERAL / GENERAL SERVICE SEAL 4500 fpm (23 m/s) TYPE 482 SELLO DOBLE CON RODAMIENTOS PARA MEZCLADORES Y AGITADORES DUAL SEAL WITH BEARINGS FOR MIXERS AND AGITATORS -22ºF to 600ºF (-30ºC to 315ºC) 1575 fpm (8 m/s) TYPE 481 SELLO CARTUCHO DOBLE PARA MOLINOS DOUBLE CARTRIDGE SEAL FOR MILLS -22ºF to 600ºF (-30ºC to 315ºC) 1575 fpm (8 m/s) TYPE 424 SELLO EXTERNO PARA ABRASIVOS EXTERNAL SEAL FOR SLURRIES -20 F up to 450 F (-29 C up to 232 C) 2950 fpm (15m/s) TYPE 422 SELLO DOBLE PARA MANEJO DE PULPA Y LODO PESADO DOUBLE CARTRIDGE SEAL FOR HEAVY MUDS -20 F up to 450 F (-29 C up to 232 C) 3
4 TYPE 421 SELLO A PRUEBA DE ATASCAMIENTO NO CLOGGING SEAL -20ºF to 400ºF (-29ºC to 204ºC) TYPE 414 SELLO DOBLE BALANCEADO CARTUCHO CARTRIDGE BALANCED DOUBLE SEAL TYPE 350 SELLO BALANCEADO / BALANCED ROTARY SEAL Vacuum to 450 psig (31 bar) 4000 fpm (20 m/s) TYPE 400 SELLO SIMPLE ROTATORIO SIMPLE ROTARY SEAL Vacuum to 250 psig (17 bar) 3600 fpm (18 m/s) TYPE 420 SELLO CONCENTRICO DOBLE CONCENTRIC DOUBLE SEAL Vacuum to 250 psig (17 bar) -20 F up to 450 F (-29 C up to 232 C) 5000 fpm (25m/s) TYPE 350 DIN SELLO ROTATORIO BALANCEADO. NORMA BALANCED ROTATORY SEAL. DIN Vacuum to 370 psig (25 bar) 4000 fpm (20 m/s) TYPE 340 SELLO ROTATORIO PARA ESPACIOS REDUCIDOS ROTARY SEAL FOR SHORT SPACES Vacuum to 250 psig (17 bar) 3600 fpm (18 m/s) TYPE 300 SELLO ROTATORIO BALANCEADO BALANCED ROTARY SEAL Vacuum to 450 psig (31 bar) 4000 fpm (20 m/s) 4 TYPE 250 SELLO ESTACIONARIO CARTUCHO PARA TRABAJO PESADO / HEAVY DUTY STATIONARY CARTRIDGE SEAL TYPE 220 SELLO ESTACIONARIO CARTUCHO PARA SERVICIO GENERAL / GENERAL SERVICE STATIONARY CARTRIDGE SEAL
5 TYPE 220A SELLO CARTUCHO ESTACIONARIO AUTOAJUSTABLE ADJUSTABLE CARTRIDGE STATIONARY SEAL TYPE 180 SELLO DOBLE CARTUCHO PARA LA INDUSTRIA PETROQUIMICA DUAL SEAL CARTRIDGE FOR PETROCHEMICAL INDUSTRY Vacuum to 360 psig (25 bar) -100 F a 800 F (-75 C a 425 C) TYPE 151 SELLO PARA ALTA TEMPERATURA HIGH TEMPERATURE BELLOW SEAL WITH DRIVE LUGS -100ºF to 800ºF (-75ºC to 425ºC) TYPE 100 SELLO DE FUELLE METÁLICO METAL BELLOW SEAL Vacuum to 360 psig (25 bar) -40ºF to 500ºF (-40ºC to 260ºC) TYPE 150 SELLO PARA ALTA TEMPERATURA HIGH TEMPERATURE BELLOW SEAL Vacuum to 360 psig (25 bar) -100ºF to 800ºF (-75ºC to 425ºC) SELLO CAZUELA PRESS FIT SEAL Up to 90 psig (6 bar) -22ºF to 220ºF (-30ºC to 104ºC) 2950 fpm (15 m/s) TYPE 68 TYPE 42 SELLO SIN CARAS DE CONTACTO SEAL WITHOUT CONTACT FACES Up to 300ºF (150ºC) 3000 fpm (15 m/s) without ambiental control with ambiental control TYPE 21 SELLO DE FUELLE ELASTOMERICO ELASTOMER BELLOW SEAL Up to 180 psig (12 bar) Up to 212ºF (100ºC)for buna Up to 392ºF (200ºC)for viton 2950 fpm (15 m/s) TYPE 6 SELLO RESORTE CORTO COMPACT SINGLE SPRING SEAL Vacuum to 145 psig (10 bar) Up to 217ºF (103ºC) 2362fpm (12 m/s) TYPE 6S SELLO DE RESORTE COMPACTO COMPACT SINGLE SPRING SEAL Vaccum to 145 psig (10 bar) Up to 212ºF (100ºC) for buna Up to 392ºF (204ºC) for viton 2362 fpm (12 m/s) 5
6 TYPE 2 SELLO DE FUELLE ELASTOMERICO PARA APLICACIÓN GENERAL ELASTOMERIC BELLOWS SEAL FOR GENERAL APPLICATION Up to 200 psig (14 bar) -40 F to 392 F (-40 C to 200 C) 3543 fpm (18 m/s) TYPE 1 SELLO DE FUELLE ELASTOMERICO PARA TRABAJO PESADO ELASTOMERIC BELLOWS SEAL HEAVY DUTY Up to 200 psig (14 bar) -40 F to 392 F (-40 C to 200 C) 3543 fpm (18 m/s) TYPE M SELLO DE RESORTE CONICO SINGLE CONICAL SPRING SEAL Up to 145 psig (10 bar) -22ºF to 220ºF (-30ºC to 104ºC) 2950 fpm (15 m/s) SELLO DE FUELLE COMPACTO COMPACT BELLOW SEAL Up to 90 psig (6 bar) -22ºF to 392ºF (-30ºC to 200ºC) 1970 fpm (10 m/s) TYPE N SELLO SIMPLE ROTATORIO SINGLE ROTARY SEAL Up to 217 psig (15 bar) -22 F to 392 F (-30 C to 200 C) 2362 fpm (12 m/s) TYPE MG1 SELLO SIMPLE ROTATORIO SINGLE ROTARY SEAL Up to 217 psig (15 bar) -22 F to 392 F (-30 C to 200 C) 2362 fpm (12 m/s) TYPE MG12 TYPE M7N SELLO CON ARANDELA ONDULADA WAVE SPRING MECHANICAL SEAL Vacuum to 250 psig (17 bar) -20ºF to 450ºF (-29ºC to 232ºC) TYPE M3N SELLO SENCILLO UNIDIRECCIONAL DIN SEAL CONICAL SPRING DIN Vacuum to 150 psig (10 bar) 3940 fpm (20 m/s) Nota: Reemplaza al sello 600 / Replaces the Type 600 seal. TYPE M32N SELLO UNIDIRECCIONAL NO BALANCEADO UNBALACE MECHANICAL SEAL Up to 150 psig (10 bar) -20ºF to 450ºF (-29ºC up to 232ºC) 3940 fpm (20 m/s) Nota: Reemplaza al sello 600 / Replaces the Type 600 seal. TYPE GRUNDFOS H SELLO CARTUCHO PARA BOMBAS GRUNDFOS CARTRIDGE MECHANICAL SEAL FOR GRUNDFOS PUMPS -74ºF to 500ºF (-59ºC to 260ºC) 3600 fpm (18 m/s) 6
7 Nota / Note El diámetro interior de las estacionarias HT, copa, O.M,O.M J.C es aproximadamente de más que el eje. Inside diameter only for seats type cushion, cup gasket,o`ring mounted JC and o`ring mounted is equal to shaft diameter aproximately. 7
8 El diámetro interior de la estacionaria varía entre 1.0mm y 1.5mm según el tamaño del eje. Inside diameter for each seat is shaft size + 1.0mm up to 1.5mm according shaft size. REV0001/
Mini Bellows Pumps. 180 Hines Ave. Bellville, OH PH: FAX:
Mini Bellows Pumps Mini Bellows models are ideal for low flow, low pressure metering applications. The pump is constructed entirely of plastic and utilizes GRI s time-proven bellows technology to provide
More informationCompact Bellows Pumps
Compact Bellows Pumps Compact Bellows Metering Pumps were specifically designed for metering applications requiring low discharge pressures. Compact pumps have been successfully applied in photo, X-ray
More informationStandard Bellows Metering Pumps
Standard Bellows Metering Pumps Bellows Metering Pumps operate on a positive displacement principle. Pumps are designed to displace both corrosive and noncorrosive fluids. Accurate to ± 0.5% from stroke
More informationA3b.2 September, 2014 Supercedes October, 2013 INLINE CENTRIFUGAL PUMPS REPLACEMENT PARTS GUIDE VL, VLC, VLS, VLSC
INLINE CENTRIFUGAL PUMPS REPLACEMENT PARTS GUIDE VL, VLC, VLS, VLSC This guide is valid for all PACO brand products beginning with product codes 16, 17 and Grundfos prodcut codes 26 and 27 only. See back
More informationSense it! Connect it! Bus it! Solve it! ENCODERS
Sense it! Connect it! Bus it! Solve it! ENCODERS Incremental encoders Incremental encoders use electrical pulses to measure rotation speed or position. The dual-channel incremental encoders of the Ri series,
More informationbidirectionally as well as the rotation sense of shafts. With absolute encoders instead, each incremental
and draw-wire sensors Spot-on and trailblazing technology measure rotation speed, sense, position, angle and length. For this purpose, they convert mechanical motion in electrical signals. There are incremental
More informationLCC Pump Series - Wear Resistant, High Performance Slurry Pumps
LCC Pump Series - Wear Resistant, High Performance Slurry Pumps 02 LCC Pump Series Solutions for the most Abrasive and Corrosive Slurry Applications With High Performance Wear Resistance, the GIW Minerals
More informationH Precitech, Inc. Microfinish ϑ 300 CNC ASPHERIC LENS POLISHING MACHINE MACHINE SPECIFICATION REVISION 6. Page 1 of 5
H05941 Microfinish ϑ 300 CNC ASPHERIC LENS POLISHING MACHINE MACHINE SPECIFICATION REVISION 6 Page 1 of 5 1 MACHINE DESCRIPTION The Microfinish 300 is a CNC machine designed for the rapid polishing and
More information8 Submersible Motors Hi-Temp 75
Applications These motors are built for dependable operation in vertical 8 diameter or larger wells, in applications with higher temperature, higher thrust or low flow. Basic Features Able to operate in
More informationType A. Rubber O.D., metal insert, sprung single lip type. shaft seal
B A R N W E L L R O T Rubber O.D., metal insert, sprung single lip type shaft seal Rubber O.D., metal insert, sprung single lip type shaft seal A R Y Type A Type A This is by far the most commonly used
More informationTrue Union PVC Ball Valves Industrial Grade, Full Port Design 1/2 to 4 inch Pipe
True Union PVC Ball Valves Industrial Grade, Full Port Design 1/2 to 4 inch Pipe SERIES Features Pressure rated 232 PSI (16 Bar) at 73 F (23 C) Full Port design for unrestricted flow Energized PTFE ball
More informationHOW TO ORDER SWIVEL JOINTS
HOW TO ORDER SWIVEL JOINTS Emco Wheaton offers a wide variety of swivel joints to fit almost any application. In order to assist you in ordering the Correct swivel joint, we have developed a guideline
More informationDial Thermometer. Particularities. Brief description. Technical data. Page 1/6. Data Sheet
Dial Thermometer Data Sheet 608202 Page 1/6 - discontinued - Particularities Temperature indicator for panel mounting Class 2 IP53 front protection Housing sizes: 52 mm and 60 mm dia. Bezel: 48x48 mm,
More information1.2 Z 014-A LUG TYPE BUTTERFLY VALVE Z 014-A TECHNICAL DATA
UG TYPE BUTTERFY VAVE Z 04-A ug type butterfly valve with threaded holes. This type enables the one-sided lugging of pipes. TECNICA DATA Nominal diameter: 00 ( only PN0/) Face-to-face: EN Series (DIN T
More informationData Sheet for Angle Sensors
Shaft encoder for variable applications Parametrisable via DIP switches Angle 0..20 to 0..360 free configurable Sense of rotation selectable (CW / CCW) Supply voltage: 5 V / 3.3 V (switchable), 24 V Analog
More informationBelts. Features. 121 CPT 2010 issue 3 (15.10)
Belts Features V and Wedge Belts comply with ISO, BS, DIN and RMA standards Factory complies with ISO 9001 standards High quality polyester cords used to ensure minimum stretch Wide range of international
More informationSYSTEM COMPONENT SERIES. Ultra-High Purity Check Valves (CB/CVV) Ultra-High Purity Check Valve (2048) Ultra-High Purity Vacuum Generators (2028)
SYSTEM COMPONENT SERIES Ultra-High Purity Check Valves (CB/CVV) Ultra-High Purity Check Valve (2048) Ultra-High Purity Vacuum Generators (2028) CB SERIES The CB stainless steel check valve series is intended
More informationGrifería & Hidroterapia. Moon
Moon Grifería & Hidroterapia 135 107 máx. 45 20º 52 Monomando lavabo Cr 2410101 Single-lever basin mixer Ma 2410105 Latiguillos mm 3/8 certificados AENOR Flexible hoses mm 3/8 AENOR certificates Con Ecosystem
More informationTECHNICAL DATASHEET Absolute Encoder AC 58 - SUCOnet
Compact design SUCOnet or Hengstler-G1-Protocol Parameterizable: preset, direction, scaling factor, resolution PC communication via RS 485 with Hengstler-G1-Protocol Clamping flange TECHNICAL DATA mechanical
More informationEnvolventes Enclosures
Envolventes Enclosures Wall mounted enclosures Flush and wall mounted enclosures IP40 Flush and wall mounted enclosures IP40 in accordance with REBT 2002 rules Cajas modulares ICP Wall mounted enclosures
More informationIdeal Vacuum Products 5910 Midway Park NE, Albuquerque, NM Our products develop tomorrow s technologies
Our products develop tomorrow s technologies We are proud of our Ideal Vacuum Super-Seal bellows valves as they are manufactured to meet the highest standards. Our bellows valve design includes a hermetically
More informationWEDGE BELTS VECO 200 DYNAM SYSTEM DETERMINING THE TRANSMISSION - ST - ISO DIN BS /
1000-1 / 6 Estimating corrected power : Use the above correction coefficients on the basis of the operating rating, the type of machine to be driven and the nature of the drive force. The corrected power
More informationZMD ZMDV. AXIALLY SPLIT, ONE-STAGE, BETWEEN-BEARINGS PUMPS 50/60 Hz. High reliability and efficiency. Wide range of material options
AXIALLY SPLIT, ONE-STAGE, BETWEEN-BEARINGS PUMPS 0/ Hz ZMD ZMDV High reliability and efficiency Wide range of material options Excellent suction capability due to low NPSH Simple installation and maintenance
More informationSECTION FIVE - SANITARY - MANHOLES
Sealtight & 4 Lug Assemblies* ITEM # DESCRIPTION PART # 1 2 3 4 6 7 8 9 10 DUST COVER VENT (not shown) STAINLESS STEEL DUST COVER HINGE PIN (3/ SEALTIGHT) HINGE PIN (/8 4 LUG) STUD (3/ SEALTIGHT) STUD
More information1.1 Z 011-A WAFER TYPE BUTTERFLY VALVE Z 011-A TECHNICAL DATA
WAFER TYPE BUTTERFY VAVE Z 0-A TECNICA DATA A universally applicable wafer type valve acc. to EN 3. The large variety of basic materials allows applications in different industries. Nominal diameter: (
More informationYOUR COMPLETE SOURCE FOR. Gear Reducers Couplings & Linear Mount Products. Product Range. GAM Can.
YOUR COMPLETE SOURCE FOR Gear Reducers Couplings & Product Range Linear Mount Products GAM Can. YOUR COMPLETE SOURCE FOR GEAR REDUCERS, COUPLINGS & LINEAR MOUNT PRODUCTS Product Selection Guide Gear Reducers
More informationWAFER TYPE BUTTERFLY VALVE Z 011-A
WAFER TYPE BUTTERFY VAVE Z 0-A TECNICA DATA Nominal diameter: Face-to-face: EN Series (DIN 0 T3 ) ISO Series API 0 Table BS Series Flange accommodation: DIN PN // ANSI B., Class MSS SP Class AWWA C AS
More informationClose-coupled centrifugal pumps
CombiBloc Close-coupled centrifugal pumps CombiBloc CombiBloc is the premier solution for pumping clean thin liquids in a very cost-effective way. The pump is part of Johnson Pump s Combi-system, a modular
More informationWAFER PATTERN BUTTERFLY TYP Z 011-A
WAFER PATTERN BUTTERFY TYP Z 0-A TECNICA DATA A universally applicable wafer type valve acc. to EN 3. The large variety of basic materials allows applications in different industries. Nominal diameter:
More informationRTD insertion temperature probes
Data sheet 902350 Page 1/6 for temperatures from -50... +260 C Steam-tight and pressure-resistant High mechanical strength For use in the food industry Available with multiple measurement points Due to
More informationGrifería & Hidroterapia. Tarqus
Tarqus Grifería & Hidroterapia 148 107 20º 52 Monomando lavabo Cr 3140101 Single-lever basin mixer Latiguillos mm 3/8 certificados AENOR Flexible hoses mm 3/8 AENOR certificates Con Ecosystem Cr 3140101-E
More informationVickers Service Data Vane Pumps ThruĆDrive Vane Type Pump (F3)-45VT*(M)-**A(M)2-**-*-22 Rev 2/98 I-3151-S
Vickers Vane Pumps MODEL VTA VTB VTBP VTC ADAPTER PLATE 584936 584922 ADAPTER 941296 941297 581833 941298 FOR BP MODELS AN ADAPTER AND SPACER IS REQUIRED. SPACER 02-136817 RETAINING COUPLING COUPLING RING
More informationTECHNICAL DATASHEET Absolute Motorfeedback Series AD 34
For brushless servo motors Light duty encoder Unique mounting concept: Save installation time and cost Mounting Depth: 25 mm (ST), 34 mm (MT) Up to 9 Bit ST - resolution + 2 Bit MT - resolution +20 C operating
More informationAccessories. Page 1/
Table of contents Page Programming software Ezturn 302 SSI-Display Type 570 303 Multifunction display Type 571 304 Fixing components for encoders Flange adapters, square, round, angle 305 Fastening eccentrics
More informationtemperature rise for easy conversion to F1, F2, F3 washdown duty enclosure both brackets for increased
W Series 56/56C, 3 Phase - TEFC Cast Construction Single Phase : RF - Removable Feet EI Lightweight High Performance Cast Frames. Features Include: MG1-Part 31 inverter duty 15:1 constant torque, 20:1
More informationSSW06. Soft Starters.
The is WEG s third generation Soft Starter line. The keypad, with dual display, has red LED digits which provide visibility and make programming easier. Integral bypass contacts eliminate heat dissipation
More informationWCK Cleaning Pigs. Features
Sizes: 6- through 14-inch Bulletin No: 3000.002.03 Date: May 2010 Cross Indexing No: n/a Supersedes: 3000.002.02 (1/07) Options WCK3 Cleaning Pig WCK-12 and WCK-3 Pigs are available in sizes 6" (0 mm)
More informationSSI GENERAL INFORMATION ABSOLUT AND PROGRAMMABLE ABSOLUT SSI ENCODERS
GENERAL INFORMA SSI ABSOLUT AND PROGRAMMABLE ABSOLUT SSI ENCODERS In many cases, the data transmitted from one system to another are subjected to magnetic fields and noise, by using standard interfaces,
More information1.7 Z 414-A LUG TYPE BUTTERFLY VALVE Z 414-A.
LUG TYPE BUTTERFLY VALVE -A TECHNICAL DATA Nominal diameter: da ( ) - da ( ) (SDR ) da ( ) - da ( ) (SDR (SDR / SDR, / SDR ) Face-to-face: EN 55 Series (DIN 32 T3 K1) ISO 5 Series API 09 Table 1 BS 55
More informationRPS-2300 Ultrasonic Sensor Controller with Remote Sensing Head
Features Various Sensing Ranges Narrow Sensing Beam High Frequency 2-Way Power Operation Sealed Remote Transducer Adjustable Delay Controls 2 Independant Range Adjustments LED Indicators Isolated Form
More informationInsertion RTD temperature probe
Data sheet 902350 Page 1/6 For temperatures between -50 and +260 C Steam-tight and pressure-resistant High mechanical strength For use in the food industry Available with multiple measuring points Due
More informationOptical Encoders. Sold & Serviced By: Toll Free Phone: Toll Free Fax:
SERVO-TEK SERVO-TEK PRODUCTS COMPANY, INC. Optical Encoders www.servotek.com Toll Free Phone: 877-378-0240 sales@servo2go.com RC-800 Summary Hollow Shaft Encoders ST50 Series High Performance Rotary Incremental
More informationn Measuring range 0... ± 0,02 Nm to 0... ± 1000 Nm n Low linearity deviation of ± 0.05 % F.S. n Intelligent operating state indicator
Precision Torque Sensor Non-contact transmission for rotating applications Optional measurement of angle and speed Model 8661 Code: Delivery: Warranty: 2-3 weeks 24 months Optional: USB interface Dual
More informationMAX FLUID TEMPERATURE
Centrifugal pumps are designed to transfer both corrosive and non-corrosive fluids at maximum hydraulic efficiencies. Centrifugal pumps are not self-priming and must be used in applications where flooded
More informationUPort TM 200/400 Series Quick Installation Guide
UPort TM 200/400 Series Quick Installation Guide Edition 4.0, November 2016 Technical Support Contact Information www.moxa.com/support Moxa Americas: Toll-free: 1-888-669-2872 Tel: 1-714-528-6777 Fax:
More informationCool Drawer Dual Sensor
The Cool Drawer Dual Sensor is designed for use in critical processes where it is desirable to have a second crystal in the vacuum chamber. Water cooled, cast stainless steel sensor body, two Cool Drawer
More informationVane wheel probe BFA25 for flow measurement of gases and liquids with integrated, configurable transducer UFA in Ex-d housing
Vane wheel probe BFA25 for flow measurement of gases and liquids with egrated, configurable transducer UFA in Ex-d housing Drawing 5 Vane wheel flow probe BFA25 (Dimensions see Page 3) Measurable variables
More informationSSW06. Soft Starters. Applications. Standard Features. Pumps Fans Blowers Compressors Crushers Saws Grinders Mixers.
General Information CFW10 CFW100 CFW08 CFW500 CFW700 CFW701 CFW11 EDP11 CFW11M SSW05 SSW07 GPH2 TPH2 The is WEG s third generation Soft Starter line. The keypad, with dual display, has red LED digits which
More informationSPECIFICATION SHEETS REV:12 / APRIL 10
SPECIFICATION SHEETS REV:12 / APRIL 10 2 BT Soldering stations PAG.4 BD Soldering stations 5 CD-A Soldering stations 6 CF-A Soldering feed stations 7 CP-A Micro tweezer Station 8 CS/CV Desoldering stations
More informationFront Load Dual Sensor
INFICON Front Load Dual crystal sensors offer proven reliability and durability and have the best thermal stability of any sensor head on the market. The dual sensor provides a backup crystal and is essential
More informationIntroduction. Available materials. Aluminum Carbon Steel Stainless Steel Ductile Iron Special Materials on Application
VALVES & CONTROLS VAREC 00B/00B The Varec 00B/00B protects tanks from damage or deformation, and minimizes emissions to the environment, as well as loss of product due to evaporation. Introduction 00B
More informationL P Linn-Pumpen GmbH. Electric-gear-pumps series FKM
Electric-gear-pumps series FKM Construction Self-priming electric-gear-pumps, bellhousing with foot-flange, pump-casing in cast iron. Gear-pumps series FKM with motor-power up to 1,5. Suction- and -ports
More informationDispersers. designed. to work perfectly
Dispersers designed to work perfectly 1 T-series Innovative solutions for dispersion technology T-series range of dispersers are designed for mixing and dispersing of products with a wide range of viscosities.
More informationStainless steel hygienic butterfly valves. F250 for imperial tubing. F251 for metric tubing.
Stainless steel hygienic butterfly valves. F for imperial tubing. F for metric tubing. Features Keystone technology. Quarter turn operation. Isolation or regulation control. Equal percentage characteristics.
More informationElectrical Rotary Drive
Stellantriebe Electrical Rotary Drive www.arisactuators.com Synchronous motor technology (AC) or direct current motor () The permanent magnets built into the synchronous motor ensure a high holding torque
More informationType. Facts. 441, 442 Full nozzle DIN. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441, 442 DIN Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 468.01-E DIN, ANSI 40 Cap H2 19 Lock nut 18 Adjusting screw with bushing 16 Upper spring plate 12
More informationABSOLUTE ROTARY ENCODER PROFIBUS-DP
Main Features - Compact and heavy-duty industrial model - Certified: By Profibus Trade Org., CE - Interface: Profibus-DP - DPV2-Functionality - Housing: 58 mm - Full or hollow shaft: 6 or 10 mm / 15 mm
More information2CP. Centrifugal twin-impeller pumps
CP Centrifugal twin-impeller pumps Clean water Domestic use Civil use Industrial use PERFORMANCE RANGE Flow rate up to l/min (7 m³/h) Head up to m APPLICATION LIMITS Manometric suction lift up to 7 m Liquid
More informationCustomised Solutions. grundfos industry
Customised Solutions grundfos industry NBG/NKG PUMPS Mix and match to create the ideal for the job at hand 22 2 Motors Grundfos Blueflux technology represents the best from Grundfos within energy efficient
More informationFrame, End Brackets, & Conduit Box With Heavy Gauge Steel Fanguard and Non-sparking Fan, for Severe
W Series 143T-447T - TEFC Heavy Duty Construction Frame, End Brackets, & Conduit Box With Heavy Gauge Steel Fanguard and Non-sparking Fan, for Severe Single Phase 56/56C : RF - Removable Feet TM - Thermistors
More informationGrifería & Hidroterapia. Studio
Studio 190 125 25º máx. 40 105 Monomando lavabo Cr 2510101 Single-lever basin mixer Ni 2510106 Latiguillos mm 3/8 certificados AENOR Flexible hoses mm 3/8 AENOR certificates Caño giratorio 90º Swivel spout
More informationPARALLEL GENERAL INFORMATION PARALLEL AND PARALLEL PROGRAMMABLE ABSOLUT ENCODERS. BCD Code 2nd decade 1st decade. Dec Binary Code Gray Code
GENERAL INFORMA PARALLEL PARALLEL AND PARALLEL PROGRAMMABLE ABSOLUT ENCODERS The absolut encoders are widely employed throughout industry. Unlike incremental measurement systems, absolut encoders always
More informationFrank Ruiz, Ruiz & Associates Steve Doe, Parker Hannifin Corporation. IFPAC SM Fifteenth International Forum Process Analytical Chemistry SM
Frank Ruiz, Ruiz & Associates Steve Doe, Parker Hannifin Corporation IFPAC SM - 00 Fifteenth International Forum Process Analytical Chemistry SM January -, 00, Amelia Island, Florida, U.S.A Instrumentation
More informationSIZES FROM 1, ,000 Nm BACKLASH FREE, TORSIONALLY STIFF METALLIC BELLOWS COUPLINGS
BX ZA SIZES FROM 1,500-100,000 Nm BAKLASH FREE, TORSIONALLY STIFF METALLI BELLOWS OUPLINGS BELLOWS OUPLINGS BX ZA Optional: GENERAL INFORMATION ABOUT R+W BELLOWS OUPLINGS: SERVIE LIFE R+W bellows couplings
More information1.4 F 012-A DOUBLE FLANGED BUTTERFLY VALVE F 012-A TECHNICAL DATA
DOUBE FANGED BUTTERFY VAVE F 01-A TS-version (through-going shaft) TECNICA DATA Nominal diameter: 0 1 Face-to-face: EN Series ISO Series API 0 Table C BS 1 short NF E -30.1 Flange accommodation: DIN 01
More informationABSOLUTE ROTARY ENCODER INTERBUS LOOP2
Main Features - Compact and heavy duty industrial model - Interface: INTERBUS Loop2 (Local-Bus) - ENCOM-Profile: K (programmable) - Housing: 58 mm - Resolution: max. 25 Bit =,554,42 steps over 4,096 revolutions
More informationData Sheet for Angle Sensors
ETS25 - R ETS25 - F Serial micro controller interface (SER) or Serial Peripheral Interface (SPI) available Versatile electrical connections on demand: Solder- or clamping terminals, flat ribbon or round
More informationQuality Since 1935 SERIES EXPANSION JOINTS WON T
1-00-25-00 Quality Since 135 SERIES 0EZ EXPANSION JOINTS THEY PERFORM LIKE WON T YOU BELIEVE THE EVOLUTION OF ELASTOMERIC EXPANSION JOINT STYLES Standard Arch (The 130 s) Flowing Arch (The 170 s) Wide
More informationABSOLUTE ROTARY ENCODER ETHERNET/IP
Main Features - Compact and heavy duty industrial model - Interface: EtherNet/IP - Conformance tested by ODVA - Housing: 58 mm - Full shaft: 6 or 10 mm / hollow shaft15 mm - Resolution: max. 30 Bit = 1,073,741,824
More informationPUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...
PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Series 800 Vertical
More informationK1F006ALH cam switch - 6-pole A - screw mounting
Characteristics cam switch - 6-pole - 45-12 A - screw mounting Complementary Main Range of product Product or component type Component name [Ith] conventional free air thermal current Product mounting
More informationPenny & Giles Technical Information JC8000
Penny & Giles Technical Information JC8000 Extremely robust design for arduous applications Center detent for enhanced return-to-center performance Under panel depth has been minimized to 78mm Pivot-point
More informationFlex Operators Operador flexible Opérateur flexible
s Flex Operators Operador flexible Opérateur flexible Installation Instructions / Instructivo de Instalación Item: MFKE _ MFKE MFKE _ MFKE MFKE _ For Use With Frame EG Para Usar Con Caja Base EG Hazardous
More informationCLAVIJAS, BASES Y ADAPTADORES PLUGS, SOCKETS AND ADAPTORS
CLAVIJAS, BASES Y ADAPTADORES PLUGS, SOCKETS AND ADAPTORS 3 148 Nuestras clavijas, bases y adaptadores son seguros, resistentes y de fácil instalación en entornos residenciales e industriales, y están
More informationMotion & Manipulation Drives motion & manipulation
Motion & Manipulation Drives 5.0 5.0 motion & manipulation 5.0 Index 5.0 motion & manipulation Rotary Motion Feedthroughs Linear Motion Feedthroughs Mini z Manipulator Z compact single Axis X-Y Motion
More informationEncoders Draw wire encoders Magnetic measurement system Limes Connection technology Accessories. Sensor technology Rotary and linear encoders
Encoders Draw wire encoders Magnetic measurement system Limes Connection technology Accessories Sensor technology Rotary and linear encoders Integrated Components Off-the-Shelf Systems Kübler's claim is
More informationData Sheet for Panel Encoders
eries V6 With flatband cable V2 older pin s backside V5 older pin s frontside Very compact design, ideal for small installation spaces Choice of different operational torques for bearing Choice of different
More informationAbsolute encoders - modular bus covers
BMMH 58 flexible with blind hollow shaft Features Encoder single- or multiturn / bus cover Robust magnetic sensing Resolution: singleturn bit, multiturn 8 bit Modular fieldbus interfaces CANopen /DeviceNet/EtherCAT/EtherNet-IP
More informationMAS Monitoring system for pumps. Reliable operation Low LCC Easy handling
MAS 711 - Monitoring system for pumps Reliable operation Low LCC Easy handling 1 19 August 2005 MAS 711 - Monitoring system for pumps Protection of one pump Stop of pump (A-alarm) Early warning (B-alarm)
More informationE SERIES CIRCULATORS
E SERIES CIRCULATORS CAST IRON BODY CONSTRUCTION BRONZE BODY CONSTRUCTION Part No. Part No. Model 120V Motor 240V Motor List Price Wt (lbs) Model 120V Motor 240V Motor List Price Wt (lbs) E7 180200-643
More informationProduct Overview. Product Overview. How To Order. Flange Input - Shaft Output Right Hand Output. Flange Input - Shaft Output.
Product Overview Product Overview Flange Input - Shaft Right Hand Flange Input - Shaft Double End Shaft Input - Shaft Left Hand How To Order 5:1-60:1 ratios sizes 1.33-3.25 One piece # Fc20 all cast iron
More informationABSOLUTE ROTARY ENCODER PROFIBUS-DP
PROCESS FIELD BUS Main Features - Compact and Heavy-Duty Industrial Model - Certified: By Profibus Trade Org., CE - Interface: Profibus-DP - DPV2-Functionality - Housing: 58 mm - Full or Hub Shaft: 6 or
More informationMOUNTING STYLE. A - Axial (end) R - Radial (side) See Chart Below CONNECTOR CHANNEL A, B, C, D, R, T, U, 2, 3, 7, W E, F, G, H, J, K, M, N B, E 5 E
Encoder Instructions VTRON ENCODERS Nidec Industrial Solutions Makes the Most Reliable Encoders in the World 8901 E. PLEASANT VALLEY ROAD INDEPENDENCE, OHIO 44131-5508 TELEPHONE: (1) 216-642-1230 FAX:
More informationFLS F3.00 PADDLEWHEEL FLOW SENSOR APPLICATIONS MAIN FEATURES
FLS F3.00 PADDLEWHEEL FLOW SENSOR APPLICATIONS The simple and reliable paddlewheel flow sensor type F3.00 is designed for use with every kind of solid-free liquids. The sensor can measure flow from 0.15
More informationEncoders without bearings - incremental Magnetic sensing, through hollow shaft max. ø180 mm pulses or 128 sinewave cycles per turn
Features Sinewave or square-wave signals Robust and wearless High protection through fully encapsulated electronics Large tolerances: axial ±3 mm, radial max. 2.2 mm Very compact dimensions Simple mounting,
More informationULTRASONIC TRANSIT TIME FLOWMETERS TTFM100 SERIES
The Transit Time Flow Meter of TTFM100 NEW GENERATION (NG) series measures flow rate by calculating the spreading time of an ultrasonic wave in a liquid, going upstream and downstream into a pipe. This
More informationSputtering Sensor ADVANTAGES
The INFICON is specifically designed for use in any sputtering process. The sensor body and cooling tubes are gold plated beryllium copper for maximum cooling efficiency in the sputtering environment.
More informationGrifería & Hidroterapia. Bret
Bret Grifería & Hidroterapia 148 110 36º 52 Monomando lavabo 3160101 Single-lever basin mixer Latiguillos mm 3/8 certificados AENOR Flexible hoses mm 3/8 AENOR certificates Con Ecosystem 3160101-E 148
More informationInductive Cylinder Position Sensors
Inductive Cylinder Position Sensors 4-Wire DC (NPN and PNP) 2-Wire AC/DC Weld immune 250, 000, and 3000 psi designs C-Series F-Series Rating (psi) Probe Diameter Inductive Cylinder Position Sensors Pepperl+Fuchs
More informationHANKIA. DSV type. Single stage,vertical Axially split case double suction pump
DSV type Single stage,vertical Axially split case double suction pump High efficiency and low pulsation Wind performance range with up to 280m head Stable service and low maintenance Heavy duty design
More informationOptical Absolute Encoder Singleturn or Multiturn with hollow shaft Profibus-DP, CAN, CANopen, DeviceNet GX, G1, G2AMH / GX, G1, G2MMH
TM Optical Absolute Encoder Singleturn or Multiturn with hollow shaft,, open, GX, G1, G2AMH / GX, G1, G2MMH Features Interfaces:,, open, Resolution: 13 bit singleturn, 29 bit multiturn Parameterizable
More informationAvailable with actuator function: POWER OPEN - POWER CLOSE FAILSAFE MODULATING FAILSAFE MODULATING. Overview
59in.lbs Smart Electric Valve Actuator Feature rich multi-voltage smart electric actuator with LED status light and function conversion kits. JC-S5 +DPS +BSR Overview The JC-S5 multi-voltage smart electric
More informationElectric Actuated Ball Valves 2-way Stainless Steel, Full Port 1/4 to 2 NPT
1/4 to 2 NPT Features Direct mount ISO5211 Full Port 316 stainless steel ball valve 1000 PSI working pressure at 100 F (38 C) Highly visual dome style valve position indicator Rugged aluminum Type 4X weatherproof
More informationThe 221 Series is designed to provide emergency venting of low pressure storage tanks and vessels.
Varec Series The Series is designed to provide emergency venting of low pressure storage tanks and vessels. Introduction When the tank is exposed to abnormal internal pressure or vacuum beyond the capability
More informationSHAKERS MIXERS MILLS BATH CRYOSTATS THERMOSTATIC BATHS
SHAKERS MIXERS MILLS BATH CRYOSTATS THERMOSTATIC BATHS SHAKERS AND MIXERS - Orbital Max. load (Kg) Amplitude (mm) Resolution (rpm) Timer (min) Useful surface (mm) OM10E 10000-01024 10 10 0-400 0-120 30
More informationABSOLUTE ROTARY ENCODER SINGLE-TURN BIT PARALLEL
ABSOUTE ROTARY ENCODER Main Features - Compact and Heavy-Duty Industrial Model - Interface: Bit-parallel, Push Pull Short Circuit Proof - Housing: 58 mm - Shaft: 6 or 10 mm, Hub- 15 mm - Resolution: max.
More informationIncremental encoders Solid shaft with clamping or synchro flange pulses per revolution
GI55, GI56 Features Encoder with solid shaft ø mm or ø6 mm Max. 6000 pulses per revolution Optical sensing method Clamping or synchro flange Industrial standard High rotation speed up to 000 rpm Optional
More informationContact Dial Thermometers
Data sheet 6852 Page 1/11 Contact Dial Thermometers FL 21 Special features Class 1.5 Display range -4 C to +6 C Temperature controller with actual value display as built-in or add-on device in a stainless
More informationTECHNICAL DATASHEET Absolute Encoder AC 58 - Profibus
Diagnostic LED Cable or M12 connector Output of speed, acceleration Programmable: Resolution, Preset, Direction, Operation time Option: Display "tico" Address via interface parameterizable (optional) hubshaft
More informationPressure switch KP. Data sheet
Data sheet Pressure switch KP The KP pressure switches can be used as safety switches against too low a suction pressure and / or too high a discharge pressure in refrigeration and air conditioning systems.
More information