Data Sheet for Angle Sensors
|
|
|
- Felicia Knight
- 5 years ago
- Views:
Transcription
1 Shaft encoder for variable applications Parametrisable via DIP switches Angle to free configurable Sense of rotation selectable (CW / CCW) Supply voltage: 5 V / 3.3 V (switchable), 24 V Analog output: 0..5 V / V (ratiom.), V High life expectancy >100 mio. shaft revolutions Small housing case (ø25 mm) Power save mode < 1 ma on request Only one sensor for different applications. User friendly to program. This saves money and time and simplifies the logistics. In combination with the long life expectancy ETA25PS offers an outstanding price performance relationship. Electrical Data Effective electrical angle of rotation 1.) to Independent linearity (best straight line) 1.) ± Absolute Linearity 1.) ± Output signal V ratiometric V ratiometric V Resolution 0.08 Update rate 150 µs Supply voltage 3.3 V ± 10 % 5V ± 10 % V Supply current (no load) 8 ma 8 ma 10 ma Output load 5 kohm Insulation resistance 1.) VDC, 1 min Insulation voltage 1.) Hz, 1 min Maximum amount of configuration cycles With DIP-Switch: 1x (OTP) Mechanical and Environmental Data Mechanical angle 1.) Lifetime 2.) Bearing Max. operational speed Operational torque without / with X-Ring Operating temperature range Endless > 100 mio. revolutions (in dependence of application) Tested under room temperature +20 C, with radial load 1N, without sealing ring Sleeve bearing Storage temperature range C Protection grade front side (IEC 60529) Standard Protection grade rear side (IEC 60529) 100 rpm (800 rpm within short time) 0.1 M 0.6 Ncm / 0.3 M 1.3 Ncm (@ RT, 10 rev./min) C (cabling fixed installed) IP40 IP40 (solder pads excluded) Page: 1 of 6
2 Mechanical and Environmental Data Vibration (IEC , Test Fc) ±1.5 mm / 20 g / 10 bis 2000 Hz / 16 frequency cycles (3x4 h) Mechanical shock (IEC 68-27, Test Ea) Max. radial load Mass (product with option ST1) Fastening parts included in delivery Fastening torque mounting nut Material shaft Material housing 50 g / 11 ms / halfsine (3x6 shocks) 1 N Approx. 26 g Hex nut (AF14) and tooth washer, if option D is ordered then an additional O-Ring is part of delivery as sealing between mounting panel and rotary encoder. 3 Nm Stainless steel Plastic / Bronze Immunity EN ESD EN RF sine wave EN Conducted sine wave EN Power frequency magnetic fields Class B Class A Class A Class A 1.) According IEC ) Determined by climatic conditions according to IEC 68-1, para without load collectives Page: 2 of 6
3 Order Code Description User parametrisable angle sensor: - Electrical rotation angle until Sense of rotation CW or CCW - OTP (1x) programmable via DIP switches Selection: standard=black/bold, possible options=grey/cursive Shaft diameter, shaft length: Shaft diameter Ø 6 mm, shaft length 22 mm Option: Shaft diameter Ø 6.35 mm, shaft length 22 mm Option: User defined shaft dimensions [mm] Ø 6.35mm Supply voltage / Output signal: VSUP=5 V ( V) / OUT=0...5 V (ratiometric) or VSUP=3.3V (3.0V...3.6V) / OUT= V (ratiometric) (VSUP 5V or 3.3V can be selected by DIP switch integrated in sensor housing) VSUP=24 V ( V) / OUT= V Shaft sealing (standard without shaft sealing): Option: D with shaft sealing Electrical connection, cable length, anti rotation pin (according drawing): Standards: Solder pads (anti rotation pin compatible to former series MAB25A, anti rotation pin A) Electrical connection, cable length, anti rotation pin (according drawing): Options: Electrical connection: Option: solder pads Option: clamping terminals Anti rotation pin: Option: anti rotation pin A (anti rotation pin compatible to former series MAB25A) Option: anti rotation pin B (anti rotation pin compatible to former series ENA22A) ETA25PS 6x22 6,35x22 XxXX D L K LA A B Order example ETA25PS Requirement: Shaft Ø 6.00 mm, shaft length 22 mm, VSUP=5V/OUT=0...5V, no shaft sealing, solder pads, anti rotation pin A Example for order code: ETA25PS 6x LA Page: 3 of 6
4 Additional options For higher quantities or on-going demand, additional options are available as described below For example: Modified shaft shape Clamping terminal, special cable design Output signal 0,5...4,5 V Output signal 5 V PWM (10-90 % Duty-Cycle) Ultra Low Power (ULP) / Ultra Low Speed (ULS) version Page: 4 of 6
5 Drawing Standard L 19 ±0,50 22 ±0,50 Mounting Surface M10x0,75 1,20 +0, ,30-0 0,03 6 ±0, ,03 Standard shaft dimensions Shaft length A 22 mm Shaft diameter D 6 mm 1 1,50 ±0,20 11,55 ±0,30 1,55 ±0,25 25 ±0,50 CW 2-0 0,20 12,80 ±0,50 21 ±0,40 6 ±0, ±0,10 Page: 5 of 6
6 Drawing Option K Picture 4 Connector Phönix: MCV0,5-5-G2,5 FK-MC0,5-5-St2, ,8 ±1 Cable and pin assignment Function Option L, K and ST1 VSUP PIN 1 OUT PIN 2 GND PIN 3 n.c. PIN 4 n.c. PIN 5 16 ±0,30 Page: 6 of 6
Data Sheet for Angle Sensors
ETS25 - R ETS25 - F Serial micro controller interface (SER) or Serial Peripheral Interface (SPI) available Versatile electrical connections on demand: Solder- or clamping terminals, flat ribbon or round
Data Sheet for Panel Encoders
eries V6 With flatband cable V2 older pin s backside V5 older pin s frontside Very compact design, ideal for small installation spaces Choice of different operational torques for bearing Choice of different
NOVOTURN Multiturn-Sensor non-contacting. Series RSM2800 digital SSI, SPI
NOVOTURN Multiturn-Sensor non-contacting Series RSM2800 digital SSI, SPI Special features True Power On System: counts turns even when not powered. Patented non-volatile technology does not require gears
ABSOLUTE ROTARY ENCODER INTERBUS
Main Features - Compact and heavy duty industrial model - Interface: Remote-Bus - ENCOM-Profile: K (programmable) - Housing: 58 mm - Shaft: 6 or 10 mm, hollow- 15 mm - Resolution: max. 25 Bit =,554,42
ABSOLUTE ROTARY ENCODER ETHERNET/IP
Main Features - Compact and heavy duty industrial model - Interface: EtherNet/IP - Conformance tested by ODVA - Housing: 58 mm - Full shaft: 6 or 10 mm / hollow shaft15 mm - Resolution: max. 30 Bit = 1,073,741,824
NOVOHALL Rotary Sensor non-contacting. Series RSC2800 digital SSI, SPI, Incremental
NOVOHALL Rotary Sensor non-contacting Series RSC2800 digital SSI, SPI, Incremental The contactless sensor utilizes the orientation of a magnetic field for the determination of the measurement angle. The
NOVOTURN Multiturn Sensor non-contacting Series RSM2800 analog
NOVOTURN Multiturn Sensor non-contacting Series RSM2800 analog Special features non-contacting, magnetic long life electr. angle 720 up to 5760 in 360 -steps available (equates 2... 16 turns) continuous
NOVOHALL Rotary Sensor non-contacting. Series RSX-7900
NOVOHALL Rotary Sensor non-contacting Series RSX-7900 Special features very robust design to extreme environmental conditions high shaft load 300 N non-contacting, magnetic measuring angles up to 360 in
SERIE 59. Rear clamp. Frontal clamp HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS
HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 50.000 pulses per turn External diameter 58 mm Hollow shaft from Ø 10 to 14 mm Protection class IP67 according
Incremental encoders Solid shaft with clamping or synchro flange pulses per revolution
GI55, GI56 Features Encoder with solid shaft ø mm or ø6 mm Max. 6000 pulses per revolution Optical sensing method Clamping or synchro flange Industrial standard High rotation speed up to 000 rpm Optional
ABSOLUTE ROTARY ENCODER INTERBUS
Main Features - Compact and heavy duty industrial model - Interface: Remote-Bus - ENCOM-Profile: K3 (programmable) - Housing: 58 mm - Shaft: 6 or 10 mm, hollow- 15 mm - Resolution: max. 25 Bit = 33,554,432
Absolute encoders - modular bus covers Solid shaft with clamping or synchro flange Optical single and multiturn encoders 13 bit ST / 16 bit MT
Features Encoder single- or multiturn / bus cover Optical sensing method Resolution: singleturn 13 bit, multiturn 16 bit Clamping or synchro flange CANopen /DeviceNet/EtherCAT/EtherNet-IP SAEJ1939/PROFINET/POWERLINK/Profibus/SSI
ENC-IQ58S-H-PROG-ZCW-4-06-A-L1
IQ58/ IQ58S/ CKQ58 Hollow Shaft Magnetic Encoder Series FEATURES Programmable Incremental Encoder Resolution from 1 to 16384 PPR Selectable Index length 90 or 180 el. Push-Pull and Line Driver Compatible
Absolute encoders - modular bus covers
BMMH 58 flexible with blind hollow shaft Features Encoder single- or multiturn / bus cover Robust magnetic sensing Resolution: singleturn bit, multiturn 8 bit Modular fieldbus interfaces CANopen /DeviceNet/EtherCAT/EtherNet-IP
ENC-CKP58-H-PROG-ZCW-4-06-A-L1
IP58/IP58S/CKP58 Programmable Incremental Encoders FEATURES Programmable Incremental Encoder Resolution from 1 to 65536 PPR Voltage 5 VDC or 10-30 VDC Push-Pull and Line Driver Compatible Output IP 65
Incremental encoders Solid shaft with EURO flange B pulses per revolution
Solid shaft with EURO flange B 0 5000 pulses per revolution EIL580 - EURO flange B - OptoPulse Features Size ø58 mm Precise optical sensing Output signal level TTL or HTL EURO flange B Connection axial,
Multiturn absolute encoder
Release date: 207-0-2 :0 Date of issue: 207-0-2 t79_eng.xml Model Number Features Industrial standard housing Ø58 mm PROFINET IRT 0 Bit multiturn Servo or clamping flange Network loop through by means
MULTI ROTARY SWITCH MR50
MAIN FEATURES 1 / 2 " SELECTOR SWITCH Dimensions Ø ½ (12.7 mm) Switching mode: Shorting or non-shorting 10, 12 and 16 selector switch positions Switching torque up to 6 Ncm Gold plated contacts Rugged
Absolute encoders - bus interfaces
Features Absolute encoder multiturn Optical sensing method Max. resolution: singleturn 18 bit, multiturn 16 bit LED status indicator PROFINET IO Maximum resistant against magnetic fields Optional EAL580
Encoder WDGA 58F PROFINET-IO (cov)
Encoder WDGA 58F PROFINET-IO (cov) www.wachendorff-automation.com/wdga58fpnb Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard
TECHNICAL DATASHEET Absolute Encoder AC 58 - SUCOnet
Compact design SUCOnet or Hengstler-G1-Protocol Parameterizable: preset, direction, scaling factor, resolution PC communication via RS 485 with Hengstler-G1-Protocol Clamping flange TECHNICAL DATA mechanical
ABSOLUTE ROTARY ENCODER INTERBUS LOOP2
Main Features - Compact and heavy duty industrial model - Interface: INTERBUS Loop2 (Local-Bus) - ENCOM-Profile: K (programmable) - Housing: 58 mm - Resolution: max. 25 Bit =,554,42 steps over 4,096 revolutions
TECHNICAL DATASHEET Absolute Encoder AC 58 - CANlayer2
Diagnostic LED Poll and auto mode Programmable: Direction, limit values Option: Display "tico" Clamping flange TECHNICAL DATA mechanical Housing diameter 58 mm Shaft diameter 6 mm / 10 mm (Solid shaft)
Absolute Encoders Multiturn
The multiturn encoders 6 and 8, with interface and combined optical and magnetic sensor technology, offer a maximum resolution of 5 bits. These encoders are programmable via the Ezturn software. The hollow
Incremental Encoder with Hollow Shaft
Incremental Encoder Type RI 36-H n miniature industry encoder for high number of pulses n short mounting length n easy mounting procedure n Application e.g.: - Motors - Machine tools - Packaging Machines
Encoder WDGA 58A PROFINET-IO (cov)
Encoder WDGA 58A PROFINET-IO (cov) www.wachendorff-automation.com/wdga58apnb Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard
ABSOLUTE ROTARY ENCODER PROFIBUS-DP
Main Features - Compact and heavy-duty industrial model - Certified: By Profibus Trade Org., CE - Interface: Profibus-DP - DPV2-Functionality - Housing: 58 mm - Full or hollow shaft: 6 or 10 mm / 15 mm
Rotary Measuring Technology Absolute encoders, Singleturn, Profibus-DP
Safety-Lock TM High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable Increased ability
Rotary Measuring Technology Absolute encoders, Multiturn, Profibus-DP
Mechanical drive Safety-Lock TM High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable
Delivery. Connection. C. AA+BB Helicoidal cable 2. Radial M12 8p CCW. 3. Radial M23 12p CCW
PROGRAMMABLE INCREMENTAL HOLLOW SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS Programmable incremental optical encoder from 1 to 65.536 pulses per rotation Programmable via USB, without an additional programming
Encoders Absolute Singleturn Encoder Types A58CS8
Types A58CS8 Sturdy design with hardened bearings High rotation speed -40...+80 C/-40...+76 F operating temperature range High shock and vibration resistance Magnetic field proof also available as explosion
TECHNICAL DATASHEET Absolute Encoder AC 58 - Profibus
Diagnostic LED Cable or M12 connector Output of speed, acceleration Programmable: Resolution, Preset, Direction, Operation time Option: Display "tico" Address via interface parameterizable (optional) hubshaft
Encoder WDGA 58B SSI.
Encoder WDGA 58B SSI www.wachendorff-automation.com/wdga58bssi Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer
Absolute encoders - bus interfaces Solid shaft with clamping or synchro flange Magnetic single- or multiturn encoders 14 bit ST / 18 bit MT
Features Encoder single- or multiturn / CANopen Precise magnetic sensing Angular accuracy up to ±0.15 Additional incremental signals High protection up to IP 67 High resistance to shock and vibrations
ABSOLUTE ROTARY ENCODER SINGLE-TURN BIT PARALLEL
ABSOUTE ROTARY ENCODER Main Features - Compact and Heavy-Duty Industrial Model - Interface: Bit-parallel, Push Pull Short Circuit Proof - Housing: 58 mm - Shaft: 6 or 10 mm, Hub- 15 mm - Resolution: max.
HD25A. Absolute Industrial Rugged Metal Optical Encoder Absolute Industrial Rugged Metal Optical Encoder, Page 1 of 5. Description.
Description HD25A, Page 1 of 5 The HD25A is a NEMA 25 sized absolute encoder designed for industrial applications. The HD25A optical encoder is a 12-bit absolute rotary position sensor, which reports a
RoHS. High shaft load capacity. Shock / vibration resistant
Due to their sturdy bearing construction in Safety-Lock Design, the Sendix 5000 and 5020 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up
Type SCA94DD. Wind Power / Direct Drive
Wind Power / Direct Drive Type SCA94DD Specifically made for measurement of Speed and Position on slow revolving Direct Drive Generators on Wind Turbines High Resolution of Speed and Position High Update
Rotary Measurement Technology Absolute Encoders, Multiturn
-40 to 80 C IP Mechanical drive Safety-LockTM High rotational speed Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection
Rotary Measuring Technology
Multiturn Type 8 Profibus-DP Very compact (only 87.8 mm installation depth); Ideal for dynamic applications thanks to its non-contact multiturn stage Solid shaft or blind hollow shaft Long service life
EAM 58 B / C - 63 A / D / E BIT PARALLEL - SSI
EAM 58 B / C - 63 A / D / E BIT PARALLEL - SSI SOLID SHAFT MULTITURN ABSOLUTE ENCODER MAIN FEATURES Industry standard multiturn absolute encoder for factory automation applications. Optical sensor technology
Rotary Measurement Technology Absolute Encoders, Singleturn
-40 to 80 C IP Safety-LockTM High rotational speed Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable
Technical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 130 a at 40 C Mission Time (T M ) L 10
Model Number Features Solid shaft 0 Bit multiturn Free of wear magnetic sampling High resolution and accuracy Mechanical compatibility with all major encoders with fieldbus interface Status LEDs Description
Multiturn absolute encoder
Model Number Features Industrial standard housing Ø58 mm 30 Bit multiturn Galvanically isolated CAN interface DSP 406, CLASS 1 and 2 Servo or clamping flange 2 limit switches Description In addition to
MULTI ROTARY SWITCH MR50
MAIN FEATURES 1 / 2 " SELECTOR SWITCH Dimensions Ø ½ (12.7 mm) Switching mode: Shorting or non-shorting Selector switch positions up to 16 Switching torque up to 6 Ncm Gold plated contacts Rugged design
Encoder WDGA 58E PROFINET-IO (cov)
Encoder WDGA 58E PROFINET-IO (cov) www.wachendorff-automation.com/wdga58epnb Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard
HMG 11. Features. Optional Additional incremental output (TTL / HTL) HMG 11. Technical data - mechanical design. Technical data - electrical ratings
Features Multiturn / SSI / Profibus / CANopen / DeviceNet / PROFINET Optical sensing method Singleturn 1 bit, multiturn 1 bit / 16 bit Blind or through hollow shaft or cone shaft ø16-0 mm Multiturn sensing
ABSOLUTE ROTARY ENCODER MIDI CANOPEN
Main Features - Compact and heavy-duty industrial design - Interface: CANopen / CAN - Housing: 58 mm Ø - Solid / hollow shaft: 6 or 10 mm Ø / 15 mm Ø - Max. 6556 steps per revolution (16 Bit) - Code: Binary
ABSOLUTE OPTICAL ROTARY ENCODER SINGLETURN BIT PARALLEL
Main Features - Compact and Heavy-Duty Industrial Model - Interface: Bit Parallel, Push Pull, Short Circuit Proof Housing: 58 mm - Shaft: 6 or 10 mm hollow- 15 mm - Resolution: Max. 16 Bit = 65,56 Steps
Encoder WDGA 58B CANopen
Encoder WDGA 58B CANopen www.wachendorff-automation.com/wdga58bcan Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and
Rotary Position Technology Absolute Encoders, Singleturn
-20 to 85 C High rotational speed Temperature Shock/vibration resistant Short-circuit proof Reverse polarity protection Optical sensor Magnetic field proof Rugged Highest shock resistance on the market:
Speed switches Programmable, digital speed switch With incremental encoder HOG 10
Features Freely programmable on and off switching speed Operation via included software (RS485 interface) Additional incremental signals (HTL/TTL) Combination with end shaft ø16 mm DSL.R: 3 outputs speed
Position Transducers Pivot head mounting potentiometric up to 300 mm, IP54 Series TEX
Position Transducers Pivot head mounting potentiometric up to 300 mm, IP54 Series TEX Special features compact dimensions protection class IP54 mountable over back-lash free pivot heads with a large angle
ENCODER. Profibus Multiturn. Series , Key-Features:
ENCODER Profibus Multiturn Series 8.5868, 8.5888 Key-Features: Content: Order Code Technical Data Profibus Interface Connection Technical Drawing......3...4...4...5 - Solid shaft: maximum diameter 0 mm
PROFIsafe over PROFINET
PROFIsafe over PROFINET Specifications Contactless, wear-free sensor system according to the Hall principle High vibration and shock resistance thanks to the robust mechanical design SIL2 and Performance
Rotary Position Technology Incremental Encoders
-40 to 85 C IP Bearing-Lock High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit protected Reverse polarity protection Optical
NOVOHALL Rotary Sensor non-contacting. Series RSB-3600 Series RMB-3600
NOVOHALL Rotary Sensor non-contacting Series RSB-3600 Series RMB-3600 Special features Non-contacting, hall technology Measuring range up to 5760 Single- and multiturn True-power-on system: counts turns
PRELIMINARY EAMH 58 B / C - 63 A / D / E BIT PARALLEL - SSI SOLID SHAFT MULTITURN ABSOLUTE ENCODER ORDERING CODE BIT PARALLEL
EAMH 58 B / C - 63 A / D / E BIT PARALLEL - SSI SOLID SHAFT MULTITURN ABSOLUTE ENCODER MAIN FEATURES Industry standard multiturn absolute encoder for factory automation applications. Optical sensor technology
Encoder WDGA 58A CANopen
Encoder WDGA 58A CANopen www.wachendorff-automation.com/wdga58acan Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and
Mechanical accessories
Bearing box Part no. 01209010, 01209029 Part no. 01209010 01209029 Shaft size Ø 15 mm Ø 10 mm Shaft load max Radial: 250 N, Axial: 150 N Speed max 4000 rpm Protection class IP 64 according to IEC 60529
ABSOLUTE ROTARY ENCODER SSI PROGRAMMABLE
Main Features - Compact and heavy-duty industrial model - Interface: Synchronous-serial (RS422/485) - Housing: 58 mm - Shaft: 6 or 10 mm - Resolution: Max. 25 Bit =,554,42 steps over 4,096 revolutions
bidirectionally as well as the rotation sense of shafts. With absolute encoders instead, each incremental
and draw-wire sensors Spot-on and trailblazing technology measure rotation speed, sense, position, angle and length. For this purpose, they convert mechanical motion in electrical signals. There are incremental
Absolute encoders - bus interfaces Solid shaft with clamping or synchro flange Optical multiturn encoders 13 bit ST / 12 bit MT, RS485
Optical multiturn encoders 1 bit ST / 12 bit MT, RS485 Features Encoder multiturn / RS485 Optical sensing method Resolution: singleturn 1 bit, multiturn 12 bit Clamping or synchro flange Fieldbus protocol
AMG 11. Features. Optional. Additional incremental output (TTL / HTL) AMG 11. Technical data - mechanical design. Technical data - electrical ratings
Features Multiturn SSI / Profibus / CANopen / DeviceNet / PROFINET Optical sensing method Singleturn 1 bit, multiturn 1 bit / 16 bit EURO-flange B10 / solid shaft ø11 mm Multiturn sensing with microgen
Encoder WDGA 36A SSI.
Encoder WDGA 36A SSI www.wachendorff-automation.com/wdga36assi Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer
Absolute encoders - bus interfaces Solid shaft with synchro flange Magnetic single- or multiturn encoders 14 bit ST / 18 bit MT
EAM60 - solid shaft CANopen - MAGRES Features Encoder single- or multiturn / CANopen Precise magnetic sensing Angular accuracy up to ±0.1 Additional incremental signals High protection up to IP 67 High
Rotary Measuring Technology Absolute singleturn encoder shaft version
Highest shock resistance on the market ( 2500 m/s 2, 6 ms acc. to DIN IEC 68-2-27) SSI, parallel or current (4... 20 ma) interface Divisions: up to 16384 (14 bits), singleturn Housing Ø 58 mm IP 65 Various
Technical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 480 a at 40 C Mission Time (T M ) L 10
Model Number Features Solid shaft Up to 31 bit overall resolution CANopen interface Free of wear magnetic sampling High resolution and accuracy Highly shock / vibration and soiling resistant Sturdy construction
ED-22 Analog Output Series Magnetic Encoder
SPECIFICATIONS Analog voltage output Low profile Standard industry package size Sleeve bearing The ED-22 series magnetic encoder can be used to replace a conventional potentiometer. This product offers
Data Sheet for Linear Sensors
MDCG MDCL MDCT-Plug MDCT-Cable With integrated electronics Probe, ball joints, loose push rod (loose core) Measuring strokes from 2 to 0 mm Cable or plug connection Supply voltage ± 1 V or 24 V Output
Encoder WDGA 36A CAN SAE J1939
Encoder WDGA 36A CAN SAE J1939 www.wachendorff-automation.com/wdga36asaej1939 Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard
TECHNICAL DATASHEET Heavy Duty - Absolute Encoder AR 62/63
AR 6 Single and Multi turn: Resolution up to 8 Bit Wearless electronic multi turn: contact -and battery less, self-energetic 300 N axial and radial load 00 g shock resistance/ 0 g vibration resistance
Encoders without bearings - incremental Magnetic sensing, through hollow shaft max. ø180 mm pulses or 128 sinewave cycles per turn
Features Sinewave or square-wave signals Robust and wearless High protection through fully encapsulated electronics Large tolerances: axial ±3 mm, radial max. 2.2 mm Very compact dimensions Simple mounting,
Position Transducers Pivot head mounting potentiometric up to 300 mm, IP54 Series TEX
Position Transducers Pivot head mounting potentiometric up to 300 mm, IP54 Series TEX Special features compact dimensions protection class IP54 mountable over back-lash free pivot heads with a large angle
Rotary Measurement Technology Absolute Encoders, Multiturn
-40 to 80 C IP Mechanical drive Safety-LockTM High rotational speed Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection
DATA SHEET ABSOLUTE OPTICAL ROTARY ENCODER ETHERNET POWERLINK
Main Features - Compact Industrial Model - Communication via Ethernet Powerlink V2 - Interface: Ethernet - Housing: 58 mm - Full or hollow shaft: 6 or 10 mm / 15 mm - Max. 65536 Steps per Revolution (16
ABSOLUTE ROTARY ENCODER MODBUS/TCP
Main Features - Compact and Heavy-Duty Industrial Model - Communication via Standard Protocols - Integrated Web Server - Interface: Modbus/TCP - Housing: 58 mm - Full shaft: 6 or 10 mm / Hub Shaft 15 mm
MHK5 SERIES PROFINET ABSOLUTE MULTI -TURN ENCODER
MHK5 SERIES PROFINET ABSOLUTE MULTI -TURN ENCODER Features Robust and compact design Blind shaft version. 15mm standard ID with options down to 6mm ID Precision ball bearings with sealing flange High temperature
Technical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 480 a at 40 C Mission Time (T M ) L 10
Model Number Features Very small housing Up to 31 bit overall resolution CANopen interface Free of wear magnetic sampling High resolution and accuracy Description This absolute rotary encoder provides
DATASHEET ABSOLUTE MAGNETIC ROTARY ENCODER CANOPEN
Robust rotary sensor based on reliable magnetic technology. Stainless steel housing capable to withstand extreme environmental conditions. Ideal suited for outdoor applications. Sturdy ball bearings for
Rotary Position Technology Incremental Encoders
-40 to 85 C IP Safety-Lock High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Optical sensor
Accessories. Page 1/
Table of contents Page Programming software Ezturn 302 SSI-Display Type 570 303 Multifunction display Type 571 304 Fixing components for encoders Flange adapters, square, round, angle 305 Fastening eccentrics
DATA SHEET ABSOLUTE MAGNETIC ROTARY ENCODER HEAVY DUTY SAE J1939
POSITAL absolute magnetic rotary encoders are available with interface. These heavy duty encoders are designed for mobile machinery and other demanding environments. An IP69K environmental rating results
Encoder WDGA 36A CANopen
Encoder WDGA 36A CANopen www.wachendorff-automation.com/wdga36acan Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and
Absolute encoder TBD/TRD with PROFIBUS-DP interface
with PROFIBUS-DP interface Document no.: TRD 11868 LE Date: 15.02.2016 Singleturn and multiturn versions Contactless, wear-free sensor system according to the Hall principle High vibration and shock resistance
ABSOLUTE ROTARY ENCODER PROFIBUS-DP
PROCESS FIELD BUS Main Features - Compact and Heavy-Duty Industrial Model - Certified: By Profibus Trade Org., CE - Interface: Profibus-DP - DPV2-Functionality - Housing: 58 mm - Full or Hub Shaft: 6 or
Rotary Measuring Technology Absolute encoders, Multiturn, DeviceNet
High IP High shaft load capacity Shock/vibration resistant Short-circuit proof Reverse polarity protection Compact and Rugged: Minimal installation depth High shock and vibration values Very compact (only
TECHNICAL DATASHEET Incremental Encoder RI 58-F
Incremental hollow shaft encoder Up to 10 000 ppr Through hollow shaft and hubshaft up to 12 mm (14 mm optional) Optimized stator coupling Applications: Feedback for asynchronous motors, industrial applications
Speed switches Programmable, digital speed switch With incremental encoder POG 10
Features Freely programmable on and off switching speed Operation via included software (RS485 interface) Additional incremental signals (HTL/TTL) EURO-flange B10 / shaft ø11 mm DSL.R: 3 outputs speed
DATA SHEET ABSOLUTE ROTARY ENCODER SSI
Main Features - Compact and Robust Industrial Model - Synchronous Serial Interface SSI (RS-422 / TTL) - Optional Incremental Output RS-422 or Push-Pull (TTL, HTL compatible) - Standard 59 mm Housing -
Absolute multiturn encoder TRK/S3 with EtherCAT FSoE interface
Absolute multiturn encoder TRK/S3 with EtherCAT FSoE interface Document no.: TRK 13348 BE Date: 13.11.2015 Contactless, wear-free sensor system according to the Hall principle High vibration and shock
The pages in this document have been extracted from a larger document and as such any page numbers are relevant only to the original document.
The pages in this document have been extracted from a larger document and as such any page numbers are relevant only to the original document. Rotary Encoder Solutions Limited Dutton Road Redwither Business
Absolute encoders - SSI
Features Encoder multiturn / SSI Optical sensing Resolution: singleturn 14 bit, multiturn 12 bit Compact design Cost-efficient mounting High reliability by self-diagnostics Counting direction input Available
ABSOLUTE ROTARY ENCODER PROFIBUS-DP
PROCESS FIELD BUS Main Features - Compact and heavy-duty industrial model - Certified: By Profibus Trade Org., CE - Interface: Profibus-DP - DPV2-Functionality - Housing: 58 mm - Full or hollow shaft:
Selector Switch Type 04
Selector Switch Type 0 Very robust and versatile positions multi wafer selector switch 5,000 switching cycles with up to 0 Ncm switching torque Gold plated contacts: micron Optional IP68 front panel sealing
Material: Weight: Shaft Loads: Cable: Connector:
Absolute Encoder Type 2RMHF-SSI Absolute Encoder - Ø 24 mm Blind Hollow Shaft - Ø 3 mm to Ø 1/4 inch Singleturn or Multiturn SSI Interface Binary or Gray Code Preset of Zero Position Choice of Counting
ABSOLUTE ROTARY ENCODER PROFIBUS-DP
PROCESS FIELD BUS Main Features - Compact and heavy-duty industrial model - Certified: By Profibus Trade Org., CE - Interface: Profibus-DP - DPV2-Functionality - Housing: 58 mm - Full or hollow shaft:
Absolute encoders multiturn
PROFIBUS P The multiturn encoders Sendix 5868 and 5888 with Profibus interface and optical sensor technology are the ideal solution for all Profibus applications. With a maximum resolution of 8 bits these
Absolute Encoders Multiturn
The Sendix multiturn encoders 5868 and 5888 with CANopen or CANlift interface and optical sensor technology are the right encoders for all CANopen or CANlift applications. With a maximum resolution of
SYSTEMS ELECTRONICS GROUP
SYSTEMS ELECTRONICS GROUP SYSTEMS M4500 MACHINE COMPONENTS RSV34-MS1 RESOLVER with MS CONNECTOR Brushless, Single-turn Resolver Rated to 3,000 RPM Rotary Position Transducer for M4500, M4020, M4040, M4041,