ENGLISH?????????? WHAT'S NEW PRODUCTS SOLUTIONS DESIGN APPNOTES SUPPORT BUY COMPANY MEMBERS Maxim > P roducts > Display Drivers and Display Power ICM7211, ICM7212 Four Digit Display Decoder/Drivers QuickView

DALLAS DS1816. Econo Reset BOTTOM VIEW TO-92 PACKAGE. See Mech. Drawings Section On Website SOT-23

www.maxim-ic.com FEATURES Automatically restarts a microprocessor after power failure Maintains reset for 150ms after V CC returns to an in-tolerance condition Reduces need for discrete components Precision

DS1232 MicroMonitor Chip

DS1232 MicroMonitor Chip www.maxim-ic.com FEATURES Halts and restarts an out-of-control microprocessor Holds microprocessor in check during power transients Automatically restarts microprocessor after

DS1834/A/D Dual EconoReset with Pushbutton

DS1834/A/D Dual EconoReset with Pushbutton www.dalsemi.com FEATURES 5V power-on reset 3.3V power-on reset Internal power is drawn from higher of either the 5V IN input or the 3.3V IN input Excellent for

No. of Receivers Active in Shutdown. No. of RS-232 Receivers. Maxim Integrated Products 1

19-0065; Rev 6; 10/03 +5V, RS-232 Transceivers with 0.1µF External Capacitors General Description The MAX200 MAX211/MAX213 transceivers are designed for RS-232 and V.28 communication interfaces where ±12V

DS1833 5V EconoReset

Maxim > Products > [Supervisors, Voltage Monitors, Sequencers] 5V EconoReset Description The is pin-compatible with the DS1233 and similar in function to the DS1233D but with an active high reset. It is

USB 2.0 High-Speed, Fault-Tolerant 3:1, 4:1 Multiplexers

19-616; Rev ; 7/6 EVALUATION KIT AVAILABLE USB 2. High-Speed, Fault-Tolerant 3:1, 4:1 General Description The analog multiplexers combine the low on-capacitance (C ON ) and low on-resistance (R ON ) necessary

DS1813 5V EconoReset with Pushbutton

Maxim > Products > [Supervisors, Voltage Monitors, Sequencers] 5V EconoReset with Pushbutton Description The (5V) and DS1818 (3.3V) EconoResets are simple three-pin voltage monitors and power-on resets

TOP VIEW CLOCK GENERATOR A1 A2 GND CPU SPEED SELECT

Rev 0; 6/04 9-Bit I 2 C Nonvolatile General Description The is a 9-bit nonvolatile (NV) I/O expander with 64 bytes of NV user memory controlled by an I 2 C TM - compatible serial interface. The offers

+2.5 V Low Power Precision Voltage Reference REF43

+2.5 V Low Power Precision Voltage Reference REF43 FEATURES PIN CONFIGURATION GENERAL DESCRIPTION The REF43 is a low power precision reference providing a stable 2.5 V output independent of variations

TLC2543C, TLC2543I, TLC2543M 12-BIT ANALOG-TO-DIGITAL CONVERTERS WITH SERIAL CONTROL AND 11 ANALOG INPUTS

2-Bit-Resolution A/D Converter 0-µs Conversion Time Over Operating Temperature Analog Input Channels Built-In Self-Test Modes Inherent Sample-and-Hold Function Linearity Error... ± LSB Max On-Chip System

Using the Multi-Axis g-select Evaluation Boards

Freescale Semiconductor Application Note Rev 2, 10/2006 Using the Multi-Axis g-select Evaluation Boards by: Michelle Clifford and John Young Applications Engineers Tempe, AZ INTRODUCTION This application

ORDERING INFORMATION # of Ports Pressure Type Device Name

Freescale Semiconductor Data Sheet: Technical Data High Temperature Accuracy Integrated Silicon Pressure Sensor for Measuring Absolute Pressure, On-Chip Signal Conditioned, Temperature Compensated and

ABRIDGED DATA SHEET. DeepCover Secure Authenticator. Benefits and Features. General Description. Applications

EALUATION KIT AAILABLE General Description The is a secure authenticator that provides a core set of cryptographic tools derived from integrated asymmetric (ECC-P256) and symmetric (SHA-256) security functions.

MPXH6300A, 20 to 300 kpa, Absolute, Integrated, Pressure Sensor

Freescale Semiconductor Document Number: Data Sheet: Technical Data Rev. 6.0, 09/2015, 20 to 300 kpa, Absolute, Integrated, Pressure Sensor Freescale's series sensor integrates on-chip, bipolar op amp

Freescale Semiconductor Data Sheet: Technical Data

Freescale Semiconductor Data Sheet: Technical Data High Temperature Accuracy Integrated Silicon Pressure Sensor for Measuring Absolute Pressure, On-Chip Signal Conditioned, Temperature Compensated and

CM1293A-04SO. 4-Channel Low Capacitance ESD Protection Array

CM1293A-04SO 4-Channel Low Capacitance ESD Protection Array Product Description CM1293A 04SO has been designed to provide ESD protection for electronic components or subsystems requiring minimal capacitive

ASM5P2308A. 3.3 V Zero-Delay Buffer

3.3 V Zero-Delay Buffer Description ASM5P2308A is a versatile, 3.3 V zero delay buffer designed to distribute high speed clocks. It is available in a 16 pin package. The part has an on chip PLL which locks

DS2118M Ultra3 LVD/SE SCSI Terminator

Ultra3 LVD/SE SCSI Terminator www.maxim-ic.com FEATURES Fully Compliant with SCSI SPI-2, SPI-3, SPI-4, Ultra160, and Ultra320 Provides Multimode Low-Voltage Differential/Single-Ended (LVD/SE) Termination

Digital Thermometer and Thermostat

General Description The DS75LV low-voltage (1.7V to 3.7V) digital thermometer and thermostat provides 9, 10, 11, or 12-bit digital temperature readings over a -55 C to +125 C range with ±2 C accuracy over

MAX14653/MAX14654/ MAX14655/MAX High-Current Overvoltage Protectors with Adjustable OVLO

EVALUATION KIT AVAILABLE MAX14653/MAX14654/ General Description The MAX14653/MAX14654/ overvoltage protection devices feature a low 38mΩ (typ) R ON internal FET and protect low-voltage systems against

CD STAGE FREQUENCY DIVIDER

The B types are supplied in 16-lead dual-in-line plastic packages (E suffix), 16-lead small-outline packages (M, M96, MT, and NSR suffixes), and 16-lead thin shrink small-outline packages (PW and PWR suffixes).

DS75 Digital Thermometer and Thermostat

www.maxim-ic.com FEATURES Temperature Measurements Require No External Components Measures Temperatures from -55 C to +125 C (-67 F to +257 F) 2 C Accuracy Over a -25 C to +100 C Range Thermometer Resolution

Copyright 2008, 2009 Grandad s Electronics Seattle, Washington, USA. INSTRUCTION MANUAL Model XTAL1. XTAL1 (assembled)

Copyright 2008, 2009 Grandad s Electronics Seattle, Washington, USA INSTRUCTION MANUAL Model XTAL1 XTAL1 (assembled) 1 XTAL1 Manual, 12/23/2008 Assembly Instructions This kit assumes that the purchaser

Data sheet acquired from Harris Semiconductor SCHS020C Revised October 2003

Data sheet acquired from Harris Semiconductor SCHS020C Revised October 2003 The CD4009UB and CD4010B types are supplied in 16-lead hermetic dual-in-line ceramic packages (F3A suffix), 16-lead dual-in-line

CM1692. Praetorian L-C LCD and Camera EMI Filter Array with ESD Protection

Praetorian -C CD and Camera EMI Filter rray with ESD Protection Features Four, Six and Eight Channels of EMI Filtering with Integrated ESD Protection Pi Style EMI Filters in a Capacitor Inductor Capacitor

Integrated Circuits. Package Information. Tape and Reel Information A separate 'Tape and Reel' document is also available from the CML website

Integrated ircuits ackage Information ape and Reel Information separate 'ape and Reel' document is also available from the M website ublication No: //astardly/publications/gs/acks.indd - Issue 20 - March

FOILCONNECT. Quick Start Guide. Starting out. Create new job. Account

Starting out Create new job This button creates a new job, starting a new calculation of your foil usage. To actually start a job you need a pdf file with the stamping-areas, which are used for the calculation.

APPLICATION NOTE 3601 Troubleshooting Windows Plug-and-Play and USB for Maxim Evaluation Kits

Maxim > App Notes > MICROPROCESSOR SUPERVISOR CIRCUITS Keywords: CMAXQUSB interface board, CMODUSB interface board, CMOD232 interface board, CMAXQUSB ev kit, CMODUSB evkit, CMOD232 evaluation kit Sep 23,

NB2304A. 3.3V Zero Delay Clock Buffer

3.3V Zero Delay Clock Buffer The NB304A is a versatile, 3.3 V zero delay buffer designed to distribute high speed clocks in PC, workstation, datacom, telecom and other high performance applications. It

NUF4107FCT1G. Four Channel EMI Pi Filter Array with Full USB Filter

NUF47FC Four Channel EMI PiFilter rray with Full USB Filter This device is a fourchannel EMI filter array for data lines. Greater than 35 db attenuation is obtained at frequencies from 8 MHz to 2.2 GHz.

General Description. Applications. Typical Operating Circuit

General Description The MAX14631/MAX14633 are USB charger adapter emulators with automatic host-charger identification circuitry for USB-dedicated chargers. The devices allow USB wall adapters, travel

UM3221E/UM3222E/UM3232E

General Description UM3221E/UM3222E/UM3232E Fail-Safe, Single Supply RS-232 Transceivers UM3221E/UM3222E/UM3232E The UM3221E/UM3222E/UM3232E series are 3.3V powered RS-232 transceivers intended for portable

DS1624 Digital Thermometer and Memory

Digital Thermometer and Memory FEATURES Temperature Measurements Require No External Components Measures Temperatures from -55 C to +125 C in 0.0625 C Increments Temperature is Read as a 12-Bit Value (2-Byte

MHz BAW Filter

Applications S-Band For high-selectivity applications Product Features Usable bandwidth 30 MHz Low loss High selectivity Single-ended operation Ceramic chip-scale Package (CSP) Small Size Hermetic RoHS

Applications +5V V CC V S EN SYNCH0, SYNCV0 SDA0, SCL0 RED SYNCH1, SYNCV1 SDA1, SCL1 MAX14895E BLU GND

19-5819; Rev ; 3/11 E V A L U A T I O N K I T A V A I L A B L E MAX14895E General Description The MAX14895E integrates level-translating buffers and features RED, GRN, and BLU (RGB) port protection for

ABRIDGED DATA SHEET. Automotive High-Current Step-Down Converter with USB Protection/Host Charger Adapter Emulator. Benefits and Features

EVALUATION KIT AVAILABLE General Description The combines a 5V automotive-grade stepdown converter capable of driving up to 2.5A, a USB host charger adapter emulator, and USB protection switches for automotive

NUP4114UCW1T2G. Transient Voltage Suppressors. ESD Protection Diodes with Low Clamping Voltage

Transient Voltage Suppressors ESD Protection Diodes with Low Clamping Voltage The NUP4114UCW1 transient voltage suppressor is designed to protect high speed data lines from ESD. Ultra low capacitance and

CM DE. 4-Channel LCD and Camera EMI Filter Array with ESD Protection

CM1408-04DE 4-Channel LCD and Camera EMI Filter Array with ESD Protection Features Four Channels of EMI Filtering with Integrated ESD Protection Pi Style EMI Filters in a Capacitor Resistor Capacitor (C

Enhanced 1:2 VGA Mux with Monitor Detection and Priority Port Logic

EVALUATION KIT AVAILABLE MAX14983E General Description The MAX14983E integrates high-bandwidth analog switches, level-translating buffers, and 5V power switches to implement a complete 1: multiplexer for

and 8 Open-Drain I/Os

EVALUATION KIT AVAILABLE MAX7325 General Description The MAX7325 2-wire serial-interfaced peripheral features 16 I/O ports. Ports are divided into eight push-pull outputs and eight I/Os with selectable

Freescale Semiconductor, I

MOTOROLA SEMICONDUCTOR TECHNICAL DATA nc. Order number: Rev 3, 08/2004 3.3 V Zero Delay Buffer The is a 3.3 V Zero Delay Buffer designed to distribute high-speed clocks in PC, workstation, datacom, telecom

V DD Power supply voltage V. V I Voltage on any input -0.3 T ST T OP. PIN Input power (50Ω) 30 dbm V ESD

Product Description The PE4239 UltraCMOS RF switch is designed to cover a broad range of applications from DC through 3. GHz. This reflective switch integrates on-board CMOS control logic with a low voltage

EnerChip CBC012. Rechargeable Solid State Energy Storage: 12µAh, 3.8V

EnerChip CBC012 Rechargeable Solid State Energy Storage: 12µAh, 3.8V Features All Solid State Construction SMT Package and Process Lead-Free Reflow Tolerant Thousands of Recharge Cycles Low Self-Discharge

CM1621. LCD and Camera EMI Filter Array with ESD Protection

LCD and Camera EMI Filter Array with ESD Protection Features Six Channels of EMI Filtering with Integrated ESD Protection Pi Style EMI Filters in a Capacitor Resistor Capacitor (C R C) Network ±15 kv ESD

CBC-EVAL-06. EnerChip CC Real-Time Clock Evaluation Kit. Product Discontinued - Not for New Designs

System Features and Overview CBC-EVAL-06 is a demonstration kit featuring the Cymbet EnerChip CBC3112 backup power and battery management circuit coupled with the Micro Crystal low power RV-2123 real-time

Is Now Part of To learn more about ON Semiconductor, please visit our website at

Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC

Technical Note DDR2 Package Sizes and Layout Requirements

echnical ote 2 ackage Sizes and ayout equirements -47-08: 2 ackage Sizes and ayout equirements Introduction Introduction 2 breaks new ground in many areas, including its creativity in packaging solutions

4.5V to 36V Dual Relay/Valve/Motor Driver

EVALUATION KIT AVAILABLE MAX14874 General Description The MAX14874 dual push-pull driver provides a small and simple solution for driving and controlling relays and valves with voltages between 4.5V and

Overvoltage Protection in Automotive Systems

HOME PRODUCTS SOLUTIONS DESIGN APPNOTES SUPPORT BUY COMPANY MEMBERS App Notes > CIRCUIT PROTECTION SENSOR SIGNAL CONDITIONERS APP 760: Jun 18, 2001 Keywords: overvoltage, over voltage, protection, automotive,

Features µp Compatible Inputs Adjustable Current Limit Thresholds External Sense Resistor Flag Signal to Indicate Output Status.

The CS312 is a bipolar microprocessor interface IC designed to drive an IGBT (or logic level MOSFETs) powering large inductive loads in harsh operating environments. The IC s dynamic current limit function

DS1626/DS1726 High-Precision 3-Wire Digital Thermometer and Thermostat

www.maxim-ic.com DESCRIPTION The DS1626 and DS1726 digital thermometers/thermostats provide temperature measurements and stand-alone thermostat capability over a -55 C to +125 C range. The DS1626 offers

ELECTRICAL SPECIFICATIONS**

REV A Hybrid Couplers 3 db, 90 Description The 1P503AS Pico Xinger is a low profile, high performance 3dB hybrid coupler in an easy to use manufacturing friendly surface mount package. It is designed for

36V-Capable Overvoltage Protector with Regulated Output Voltage

19-5570; Rev 1; 8/11 36V-Capable Overvoltage Protector with General Description The protects valuable consumer circuits against voltage faults of up to +36V. This robust protection is implemented in a

MM3ZxxxT1G Series, SZMM3ZxxxT1G Series. Zener Voltage Regulators. 300 mw SOD 323 Surface Mount

MM3ZxxxT1G Series, SZMM3ZxxxT1G Series Zener Voltage Regulators 3 mw Surface Mount This series of Zener diodes is packaged in a surface mount package that has a power dissipation of 3 mw. They are designed

ASM330LHH. Automotive 6-axis inertial module: 3D accelerometer and 3D gyroscope. Data brief. Features. Applications. Description

Data brief Automotive 6-axis inertial module: 3D accelerometer and 3D gyroscope Features LGA-14L Typ: (2.5 x 3.0 x 0.83 mm³) AEC-Q100 qualified Extended temperature range from -40 to +105 C Embedded compensation

SGM2020 Low Power, Low Dropout, RF - Linear Regulators

GENERAL DESCRIPTION The series low-power, low-noise, low-dropout, CMOS linear voltage regulators operate from a 2.5V to 5.5V input voltage. They are the perfect choice for low voltage, low power applications.

EMC2113. RPM-Based Fan Controller with Multiple Temperature Zones & Hardware Thermal Shutdown PRODUCT FEATURES. General Description.

EMC2113 RPM-Based Fan Controller with Multiple Temperature Zones & Hardware Thermal Shutdown PRODUCT FEATURES Data Brief General Description The EMC2113 is an SMBus compliant fan controller. The fan driver

24AA16/24LC16B. 16K I 2 C Serial EEPROM. Device Selection Table. Description: Features: Package Types. Block Diagram. Temp. Ranges.

6K I C Serial EEPROM Device Selection Table Part Number Features: Vcc Range Max. Clock Frequency Temp. Ranges A6.7-. 00 khz () I LC6B.-. 00 khz I, E Note : 00 khz for

Archer Connectors. Archer Kontrol. 1.27mm (.050") PITCH

rcher onnectors mm (.050") PITH The rcher range from Harwin is a series of mm (0.05 ) pitch connectors, offering single and double row options at half the P footprint of a 2.54mm (0.1 ) pitch connector.

1mm Pitch Double Rows Low Profile Wire-to-Board Connectors

mm Pitch Double Rows Low Profile Wire-to-Board Connectors DF series Features. Contact Pitch mm contact pitch allows reliable solder and cable termination.. Reliable electrical connection wipe Effective

Data sheet acquired from Harris Semiconductor SCHS041D Revised October 2003

Data sheet acquired from Harris Semiconductor SCHS041D Revised October 2003 The CD4043B and CD4044B types are supplied in 16-lead hermetic dual-in-line ceramic packages (F3A suffix), 16-lead dual-in-line

AS8C803625A AS8C801825A

256K X 36, 512K X 18 3.3V Synchronous ZBT TM SRAMs 3.3V I/O, Burst Counter Flow-Through Outputs AS8C803625A AS8C801825A Features 256K x 36, 512K x 18 memory configuration Supports high performance system

CM1409. LCD and Camera EMI Filter Array with ESD Protection

LCD and Camera EMI Filter Array with ESD Protection Product Description The CM1409 is a family of pi style EMI filter arrays with ESD protection, which integrates either six or eight filters (C R C) in

CM1418 Praetorian L-C EMI Filter with ESD Protection for Headset Speakers

Praetorian L-C EMI Filter with ESD Protection for Headset Speakers Product Description The CM1418 is an L C EMI filter array with ESD protection that integrates two Pi filters (C L C) for a headset speaker.

NP0080TA Series. Low Capacitance Protector

Low Capacitance Protector The NP series of low voltage/low capacitance overvoltage protection devices protect high speed xdsl line drivers and chipsets from both Lightning Surge and ESD events. The devices

MPXHZ6400A. Freescale Semiconductor Technical Data. MPXHZ6400A Rev 0, 08/2005

Freescale Semiconductor Technical Data Media Resistant and High Temperature Accuracy Integrated Silicon Pressure Sensor for Measuring Absolute Pressure, On-Chip Signal Conditioned, Temperature Compensated

CM1461. Praetorian C-L-C LCD and Camera EMI Filter Array with ESD Protection

Praetorian C-L-C LCD and Camera EMI Filter Array with ESD Protection Product Description The CM1461 is a family of pi style EMI filter arrays with ESD protection, which integrates four, six and eight filters

MHz SAW Filter

Applications For ISM applications Bluetooth Product Features Functional Block Diagram Top view Usable bandwidth 83.5 MHz High Attenuation Singleended operation Ceramic Surface Mount Package (SMP) No Impedance

YM12S05 DC-DC Converter Data Sheet VDC Input; VDC 5A

The Products: Y-Series Applications Intermediate Bus Architectures Distributed Power Architectures Data communications Telecommunications Servers, workstations Benefits High efficiency no heat sink required

Digital Thermometer and Thermostat in SOT23

General Description The digital thermometer and thermostat provides temperature readings that indicate the device s temperature. Thermostat settings and temperature readings are all communicated to/from

1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors

ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

Mechanical Differences Between the 196-pin MAP-BGA and 196-pin PBGA Packages

Freescale Semiconductor Engineering Bulletin EB360 Rev. 1, 10/2005 Mechanical Differences Between the 196-pin MAP-BGA and 196-pin PBGA Packages This document describes the differences between the 196-pin

PACKAGE OPTION ADDENDUM

PACKAGE OPTION ADDENDUM www.ti.com 4-Jun-2007 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3) SN54LS375J

Getting Started with Keil's µvision2

Maxim > App Notes > MICROCONTROLLERS Keywords: Programming in C for the DS80C400 May 10, 2004 APPLICATION NOTE 3048 Programming in C for the DS80C400 Abstract: This article starts with a C implementation

I 2 C Port Expander with Eight Inputs. Features

EVALUATION KIT AVAILABLE MAX7319 General Description The MAX7319 2-wire serial-interfaced peripheral fea-tures eight input ports with selectable internal pullups, overvoltage protection to +6V, and transition

1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors

ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

Obsolete. Product Specification PE4210. Product Description. SPDT UltraCMOS RF Switch 10 MHz - 3 GHz Features Single 3-volt power supply

Product Description The PE421 UltraCMOS RF Switch is designed to cover a broad range of applications from 1 MHz to 3 GHz. This singlesupply switch integrates on-board CMOS control logic driven by a simple,

MAX5591 Evaluation Kit/Evaluation System

19-3366; Rev 2; 4/06 MAX5591 Evaluation Kit/Evaluation System General Description The MAX5591 evaluation system (EV system) (MAX5591EVCMOD2) is a complete 8-channel, 12-bit data-generation system consisting

Rechargeable Solid State Energy Storage: 50µAh, 3.8V. 1 V+ 4 V- 2,3 NIC 5-16 NIC Note: NIC = No Internal Connection CBC050 Schematic - Top View

Product Discontinued - Not for New Designs EnerChip CBC050 Rechargeable Solid State Energy Storage: 50µAh, 3.8V Features All Solid State Construction SMT Package and Process Lead-Free Reflow Tolerant Thousands

KIT34901EFEVB Evaluation Board

Freescale Semiconductor, Inc. User s Guide Document Number: KT34901UG Rev. 1.0, 2/2014 KIT34901EFEVB Evaluation Board Featuring the MC34901 High Speed CAN Transceiver Contents Figure 1. KIT34901EFEVB Evaluation

ELECTRICAL SPECIFICATIONS**

ico Xinger 1dB Directional Coupler Description The 161 ico Xinger is a low profile, miniature 1dB directional coupler in an easy to use surface mount package designed for MMDS and WLAN applications. The

Digital Thermometer and Thermostat

General Description The DS75 digital thermometer and thermostat provides 9, 10, 11, or 12-bit digital temperature readings over a -55 C to +125 C range with ±2 C accuracy over a -25 C to +100 C range.

12 Push-Pull Outputs and 4 Inputs

EVALUATION KIT AVAILABLE MAX7326 General Description The MAX7326 2-wire serial-interfaced peripheral features 16 I/O ports. The ports are divided into 12 push-pull outputs and four input ports with selectable

Obsolete Parameter Conditions Minimum Typical Maximum Units

Product Description The PE4242 UltraCMOS RF Switch is designed to cover a broad range of applications from 1 MHz through 3 GHz. This reflective switch integrates on-board CMOS control logic with a low

Study Guide Microsoft Office Word

Study Guide Microsoft Office Word Sep 13, 2013 Book Description. Demonstrate your expertise with Microsoft Office! Designed to help you practice and prepare for the 2013 Word Expert Microsoft Office Oct

Features. Ordering Information. Selector Guide. Applications. Pin Configurations. I 2 C Port Expander with 8 Open-Drain I/Os

General Description The MAX7321 2-wire serial-interfaced peripheral features eight open-drain I/O ports with selectable internal pullups and transition detection. Any port may be used as a logic input

INSTALL.EXE. Maxim Integrated Products 1

9-258; Rev 0; 9/02 MAX06 Evaluation Kit General Description The MAX06 evaluation kit (EV kit) is designed to evaluate the MAX06. The MAX06 is an 8-bit four-channel (two-differential-channel) ADC with a

CM1219. Low Capacitance Transient Voltage Suppressors / ESD Protectors

Low Capacitance Transient Voltage Suppressors / ESD Protectors Description The family of devices features transient voltage suppressor arrays that provide a very high level of protection for sensitive

SGM2019 Low Power, Low Dropout, RF - Linear Regulators

GENERAL DESCRIPTION The SGM219 series low-power, low-noise, low-dropout, CMOS linear voltage regulators operate from a 2.5V to 5.5V input voltage. They are the perfect choice for low voltage, low power

System family AP. Safety switch CET.-AP- With guard locking

System family P Safety switch ET.-P- With guard locking at. 4 PLe Safety switch with guard locking Locking force up to 600 N Metal housing Diagnostics via 4 LEDs Notice The device is only allowed to be

DS2120 Ultra3 LVD SCSI Terminator

Ultra3 LVD SCSI Terminator www.maxim-ic.com FEATURES Fully Compliant with Ultra3, Ultra160, Ultra320, and Ultra2 (LVD only) SCSI Provides Low-Voltage Differential (LVD) Termination for Nine Signal Line

SGM2019 Low Power, Low Dropout, RF-Linear Regulators

GENERAL DESCRIPTION The SGM2019 series low-power, low-noise, low-dropout, CMOS linear voltage regulators operate from a 2.5V to 5.5V input voltage. They are the perfect choice for low voltage, low power

MAX1168 Evaluation Kit/Evaluation System

9-299; Rev ; /07 MAX68 Evaluation Kit/Evaluation System General Description The MAX68 evaluation system (EV system) is a complete 8-channel, 6-bit data-acquisition system that is comprised of a MAX68 evaluation

ESD5Z2.5T1G Series, SZESD5Z2.5T1G Series. Transient Voltage Suppressors. Micro Packaged Diodes for ESD Protection

ESD5Z2.5T1G Series, SZESD5Z2.5T1G Series Transient Voltage Suppressors Micro Packaged Diodes for ESD Protection The ESD5Z Series is designed to protect voltage sensitive components from ESD and transient

for Xilinx UltraScale KCU1250 and VCU1287 Evaluation Boards

for Xilinx UltraScale KCU1250 and VCU1287 Evaluation Boards Features The is a proven application circuit design that provides the MGTAVCCAUX, MGTAVCC, and MGTAVTT rails for Xilinx s Ultra- Scale Virtex

1000 MHz 2000 MHz 1000 MHz 2000 MHz 1000 MHz 2000 MHz 1000 MHz 2000 MHz ON Switching Time CTRL to 0.1 db final value, 2 GHz 200 ns

Product Description The PE4245 RF Switch is designed to cover a broad range of applications from near DC to 4 MHz. This switch integrates on-board CMOS control logic with a low voltage CMOS compatible

MAXSANTAFEEVSYS User Manual

MAXSANTAFEEVSYS User Manual Rev 0; 5/14 For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim Integrated s website at www.maximintegrated.com. Maxim

Product Specification PE95421

Product Description The PE95421 is an RF SPDT switch available in a hermetically sealed ceramic package and also available in die. It covers a broad range of applications from 1-to-8500 MHz and has been

Optically-Isolated Multilink BDM Interface for the S08/S12 Microcontrollers by Michael A. Steffen

Freescale Semiconductor Application Note AN3589 Rev. 0, 02/2008 Optically-Isolated Multilink BDM Interface for the S08/S12 Microcontrollers by Michael A. Steffen 1 Introduction This application note explains