MODEL: CND. Multiplex Transmission System
|
|
|
- Gyles Flynn
- 5 years ago
- Views:
Transcription
1 POW RUN SA1 SA2 MODEL: CND Multiplex Transmission System ADAPTOR CONNECTOR Functions & Features Simplifies wiring wk between multiplex transmission units (DLA1) and 10-RACK, 15-RACK and signal conditioner modules 88: E2 (Di 16 / Do 16) YOKOGAWA card** ST2 ( cable) 89: C1 (Do 32) YOKOGAWA card** ST2 / ST3 ( cable) 8A: A1 (Di 32) YOKOGAWA card** ST7 ( cable) 8B: C1 (Do 32) YOKOGAWA card** ST6 ( cable) *FUJITSU type connect (model: -36xP040-AU) **M-System guarantees the connecting section RELATED PRODUCTS Standard rack (f 10/15/18-Rack) Connect terminal block (model: CNT) Special cable with 40-pin connect (model: ) MODEL: CND [1] ORDERING INFORMATION Code number: CND-[1] Specify a code from below f [1] (e.g. CND-11) [1] CONNECTOR (DLA1 I/O model suffix code connected equipment) 11: G1 (Ai 32) 10/18-Rack* M1 (Ao 32) 10/18-Rack* 12: R1 (Ai 16 / Ao 16) 10/18-Rack* 21: G1 (Ai 32) 15-Rack* M1 (Ao 32) 15-Rack* 22: R1 (Ai 16 / Ao 16) 15-Rack* 31: A1, A2, C1, C2, C3, C4, E1, E2, G1, M1, P1, R1, S1 Connect Terminal Block (CNT)* 71: C1 (Do 32) OMRON I/O relay terminal** (f G7TC-OC16 output) 72: C2 (Do 32) OMRON I/O relay terminal** (f G7TC-OC16 output) 81: M1 (Ao 32) YOKOGAWA card** VM1 x 2 ( cable) 82: R1 (Ai 16 / Ao 16) YOKOGAWA card** VM2 x 2 ( cable) 83: A2 (Di 64) C3 (Do 64) YOKOGAWA card** ST5 / ST6 / ST7 ( cable) 84: R1 (Ai 16 / Ao 16) YOKOGAWA card** VM4, VM1 ( cable) 86: C2 (Do 32) YOKOGAWA card** ST2 / ST3 ( cable) 87: A1 (Di 32) YOKOGAWA card** ST2 / ST4 ( cable) GENERAL SPECIFICATIONS Construction: Metal plates assembly Material: SPCC Coating: Melamine resin Col: Black INSTALLATION Operating temperature: -5 to +55 C (23 to 131 F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Attached to the front of DLA1 unit Weight Standard: 450 g (0.99 lbs) CND-83: 250 g (0.55 lbs) PERFORMANCE Insulation resistance: 100 MΩ with 500 V DC Dielectric strength: 1000 V 1 minute (I/O connect to metal housing) CND SPECIFICATIONS ES-6689 Rev.2 Page 1/7
2 CONNECTOR PIN ASSIGNMENT CONNECTORS 10-Rack, 15-Rack 18-Rack modules can be linked directly via 40-pin connect cable (model: ). CND-11 DLA1-xG1, xm1 10/18-Rack DLA1 TERM. 10/ I/O NO A1 A16 Aio, ch.1 (+) 16 (+) A1 A16 Aio, ch.1 (+) 16 (+) CND-12 10/18-Rack DLA1 TERM. 10/ I/O NO A1 A16 Ai, ch.1 (+) 16 (+) 17, 18 NC NC No connection 19, 20 B1 B20 B1 B20 Ai, ch.1 ( ) 16 ( ) A1 A16 Ao, ch.1 (+) 16 (+) 37, 38 NC NC No connection 39, 40 B1 B20 B1 B20 Ao, ch.1 ( ) 16 ( ) CND-21 DLA1-xG1, xm1 15-Rack DLA1 TERM. 15-RACK I/O NO. 1 A1 Aio, ch. 1 (+) 2 B1 Aio, ch. 2 (+) 3 A2 Aio, ch. 3 (+) 4 B2 Aio, ch. 4 (+) 5 A3 Aio, ch. 5 (+) 6 B3 Aio, ch. 6 (+) 7 A4 Aio, ch. 7 (+) 8 B4 Aio, ch. 8 (+) 9 A5 Aio, ch. 9 (+) 10 B5 Aio, ch.10 (+) 11 A6 Aio, ch.11 (+) 12 B6 Aio, ch.12 (+) 13 A7 Aio, ch.13 (+) 14 B7 Aio, ch.14 (+) 15 A8 Aio, ch.15 (+) 16 B8 Aio, ch.16 (+) 17 A9 Aio, ch.17 (+) 18 B9 Aio, ch.18 (+) 19 A10 Aio, ch.19 (+) 20 B10 Aio, ch.20 (+) 21 A11 Aio, ch.21 (+) 22 B11 Aio, ch.22 (+) 23 A12 Aio, ch.23 (+) 24 B12 Aio, ch.24 (+) 25 A13 Aio, ch.25 (+) 26 B13 Aio, ch.26 (+) 27 A14 Aio, ch.27 (+) 28 B14 Aio, ch.28 (+) 29 A15 Aio, ch.29 (+) 30 B15 Aio, ch.30 (+) 31 A16 Aio, ch.31 (+) 32 B16 Aio, ch.32 (+) CND Rack DLA1 TERM. 15-RACK I/O NO. 1 A1 Ai, ch. 1 (+) 2 B1 Ai, ch. 2 (+) 3 A2 Ai, ch. 3 (+) 4 B2 Ai, ch. 4 (+) 5 A3 Ai, ch. 5 (+) 6 B3 Ai, ch. 6 (+) 7 A4 Ai, ch. 7 (+) 8 B4 Ai, ch. 8 (+) 9 A5 Ai, ch. 9 (+) 10 B5 Ai, ch.10 (+) 11 A6 Ai, ch.11 (+) 12 B6 Ai, ch.12 (+) 13 A7 Ai, ch.13 (+) 14 B7 Ai, ch.14 (+) 15 A8 Ai, ch.15 (+) 16 B8 Ai, ch.16 (+) 17, 18 A17, B17 Ai, ch.1 ( ) 16 ( ) 19, 20 NC No connection 21 A9 Ao, ch. 1 (+) 22 B9 Ao, ch. 2 (+) 23 A10 Ao, ch. 3 (+) 24 B10 Ao, ch. 4 (+) 25 A11 Ao, ch. 5 (+) 26 B11 Ao, ch. 6 (+) 27 A12 Ao, ch. 7 (+) 28 B12 Ao, ch. 8 (+) 29 A13 Ao, ch. 9 (+) 30 B13 Ao, ch.10 (+) 31 A14 Ao, ch.11 (+) 32 B14 Ao, ch.12 (+) 33 A15 Ao, ch.13 (+) 34 B15 Ao, ch.14 (+) 35 A16 Ao, ch.15 (+) 36 B16 Ao, ch.16 (+) NC No connection CND-31 DLA1 I/O unit CNT-S, -M DLA1 TERM A1 A20 B1 B A17, B17 Aio ch.1 ( ) 32 ( ) CND SPECIFICATIONS ES-6689 Rev.2 Page 2/7
3 CONNECTORS CND-71 Output of DLA1- x Input of G7TC-OC16 Di ch.1 ch.16 Input of G7TC-OC16 Di ch.1 ch.16 CND-72 Output of DLA1- x Input of G7TC-OC16 Di ch.1 ch.16 Input of G7TC-OC16 Di ch.1 ch.16 CND-81 Output of DLA1-x Input of VM1 Ai ch.1 ch.16 Input of VM1 Ai ch.1 ch.16 CND-82 Output of DLA1- xr1 Ai 1 Ao 1 Ai 9 Ao 9 I/O of VM2 Ao ch.1 Ai ch.1 ch.8 ch.8 I/O of VM2 Ao ch.1 Ai ch.1 ch.8 ch.8 CND-83 Input of DLA1-x Output of ST7 Do ch.1 ch.32 Do ch.1 ch.32 Output of DLA1- x Input of ST6 Di ch.1 ch.32 Di ch.1 ch.32 CND-84 I/O of DLA1-x Output of VM4 Ao ch.1 ch.16 Input of VM1 Ai ch.1 ch.16 CND-86 Output of DLA1-x Input of ST3 Di ch.1 ch.16 Di ch.1 ch.16 CND-87 Input of DLA1-x Output of ST4 Do ch.1 ch.16 Do ch.1 ch.16 CND-88 I/O of DLA1-x I/O of ST2 Do ch.1 ch.16 Di ch.1 ch.16 CND-89 Output of DLA1-x Input of ST3 Di ch.1 ch.16 Di ch.1 ch.16 CND-8A Input of Di 1 Di 32 Output of ST7 Do ch.1 ch.32 CND-8B Output of Do 1 Do 32 Input of ST6 Di ch.1 ch.32 DIMENSIONS unit: mm (inch) STANDARD TYPE CND (7.28) 206 (8.11) 206 (8.11) 31 (1.22) 1 (.04) 18 (.71) 47 (1.85) 47 (1.85) 247 (9.72) 247 (9.72) CND SPECIFICATIONS ES-6689 Rev.2 Page 3/7
4 SYSTEM CONFIGURATION EXAMPLES / 15 / DLA1 VM1 (analog input 16 ch. x 2) Sens VM1 Sens DLA1-xG1 + CND-11* DLA1-xM1 + CND-81 VM1 *Use CND-21 f 15-RACK. DLA1-xG1 INPUT : Ai 1 Ai 16 : Ai 17 Ai 32 VM1 INPUT (DLA1-xM1 OUTPUT) : Ch. 1 Ch. 16 : Ch. 1 Ch / 15 / DLA1 VM2 (analog I/O each 8 ch. x 2) Sens VM2 Control Coutput + CND-12** + CND-82 VM2 *Use CND-22 f 15-RACK. I/O : Ai 1 Ai 16 : Ao 1 Ao 16 VM2 I/O ( I/O) : Ai Ch. 1 Ch. 8 Ao Ch. 1 Ch. 8 : Ai Ch. 1 Ch. 8 Ao Ch. 1 Ch CONTACT INPUT DLA1 ST3 (contact input 16 ch. x 2) DLA1-xC2 + CND-86 ST3 INPUT Di 1 Di 32 ST3 INPUT (DLA1-xC2 OUTPUT) : Ch. 1 Ch. 16 : Ch. 1 Ch CND SPECIFICATIONS ES-6689 Rev.2 Page 4/7
5 4. CONTACT OUTPUT DLA1 ST4 (contact output 16 ch. x 2) Contact Output LOAD + CND-87 ST4 OUTPUT Do 1 Do 32 ST4 OUTPUT ( INPUT) : Ch. 1 Ch. 16 : Ch. 1 Ch CONTACT I/O DLA1 ST2 (contact I/O each 16 ch.) Contact I/O LOAD DLA1-xE1 DLA1-xE2 + CND-88 ST2 DLA1-xE1 I/O Di 1 Di 16 Do 1 Do 16 ST2 I/O (DLA1-xE1 I/O) : Do Ch. 1 Ch. 16 : Di Ch. 1 Ch CONTACT INPUT DLA1 ST3 (contact input 16 ch. x 2) + CND-89 ST3 INPUT Di 1 Di 32 ST3 INPUT ( OUTPUT) : Ch. 1 Ch. 16 : Ch. 1 Ch CONTACT INPUT DLA1 OMRON I/O RELAY TERMINAL **G79 G7TC-OC16 + CND-71* **G79 G7TC-OC16 *Use CND-72 with DLA1-xC2 unit. **Use G79-xC (OMRON). INPUT Di 1 Di 32 G7TC-OC16 INPUT ( OUTPUT) : Ch. 1 Ch. 16 : Ch. 1 Ch. 16 Common negative are separated by the relay terminal. CND SPECIFICATIONS ES-6689 Rev.2 Page 5/7
6 8. CONTACT INPUT DLA1 ST6 (contact input 32 ch. x 2) 64 points DLA1-xA2 DLA1-xC3 + CND-83 ST6 DLA1-xA2 INPUT : Ch. 1 Ch. 32 : Ch. 33 Ch. 64 ST6 INPUT (DLA1-xC3 OUTPUT) : Ch. 1 Ch. 32 : Ch. 1 Ch CONTACT OUTPUT DLA1 ST7 (contact output 32 ch.) Contact Output LOAD + CND-8A ST7 OUTPUT Do 1 Do 32 ST7 OUTPUT ( INPUT) : Ch. 1 Ch CONTACT INPUT DLA1 ST6 (contact input 32 ch. x 2) + CND-8B ST6 INPUT Di 1 to Di 32 ST6 INPUT ( OUTPUT) : Ch. 1 to Ch / 15 / DLA1 VM1 (analog input 16 ch.) VM4 (analog output 16 ch.) Sens VM4 Control Coutput + CND-12* + CND-84 VM1 *Use CND-22 f 15-RACK. I/O : Ai 1 to Ai 16 : Ao 1 to Ao 16 VM4 OUTPUT ( INPUT) VM1 INPUT ( OUTPUT) : Ch. 1 to Ch. 16 : Ch. 1 to Ch CND SPECIFICATIONS ES-6689 Rev.2 Page 6/7
7 Specifications are subject to change without notice. CND SPECIFICATIONS ES-6689 Rev.2 Page 7/7
MODEL: R1M-D1. PC Recorders R1M Series. SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.)
PC Recorders R1M Series PC RECORDER (contact output, 32 points) Functions & Features Industrial recorder on PC 32-point open collector outputs Easy system expansion via Modbus RTU Recorded data exportable
MODEL: R1M-A1. PC Recorders R1M Series. SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.)
PC Recorders R1M Series PC RECORDER (contact input, 32 points) Functions & Features Industrial recorder on PC 32-point dry contact inputs Easy system expansion via Modbus RTU Recorded data exportable to
MODEL: R1M-P4. PC Recorders R1M Series. SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.)
PC Recorders Series PC RECORDER (4 totalized counter inputs, 8 contact inputs and outputs) Functions & Features Industrial recorder on PC Totalized counter inputs Counts stored in E 2 PROM Easy system
R: Red Y: Amber G: Green B: Blue W: White. R: Red Y: Amber G: Green B: Blue W: White. R: Red Y: Amber G: Green B: Blue W: White.
Tower Light Series CC-Link TOWER LIGHT (0 mm dia., layers) Functions & Features Lighting, blinking and buzzing are controllable with PLC. Bi-color lighting available in fourth layer Separable tension clamp
DLS-E2 TELEMETERING UNIT BEFORE USE... POINTS OF CAUTION INSTRUCTION MANUAL MODEL. (16 contact inputs & 16 open collector outputs)
INSTRUCTION MANUAL TELEMETERING UNIT ( contact inputs & open collector outputs) MODEL DLS-qE DLS-E BEFORE USE... Thank you for choosing M-System. Before use, please check contents of the package you received
MODEL: M8BS-16. [3] OPTIONS blank: none /Q: With options (specify the specification)
![MODEL: M8BS-16. [3] OPTIONS blank: none /Q: With options (specify the specification)](/thumbs/93/112321482.jpg "MODEL: M8BS-16. [3] OPTIONS blank: none /Q: With options (specify the specification)")
MOEL: M8S-6 ual Output Super-mini Signal onditioners Pico-M Series INSTLLTION SE (6 positions) Functions & Features Holding up to 6 modules of Pico-M series signal conditioners Power supplied through printed
DAL4 REPEATER MODEL. (SIN-NET, M-Bus use) MODEL & SUFFIX CODE SELECTION DAL4 TRANSMISSION ORDERING INFORMATION RELATED PRODUCTS GENERAL SPECIFICATIONS
REPETER (SIN-NET, M-us use) MODEL DL MODEL & SUFFIX CODE SELECTION MODEL CLE & PORT TYPE : Twisted-pair cable, ports : Fiber optics (PCF), ports Twisted-pair cable, port 5 : Fiber optics (I-50 nm), port
MODEL: M1EXV. OUTPUT Field-selectable DC Output Current output: 0-20 ma DC Voltage output: V DC Voltage output: V DC
MODEL: M1EX 2 Channel Super-mini Signal Conditioners with Display M1E Series SIGNAL TRANSMITTER (2 channels, PC programmable) Functions & Features Converts DC input from a sensor into a standard process
MODEL: R1M-GH. PC Recorders R1M Series
PC Recorders Series PC RECORDER (thermocouple or DC input, 16 points) Functions & Features Industrial recorder on PC 16-point thermocouple or DC inputs Easy system expansion via Modbus RTU Recorded data
MODEL: R3-NFL1. SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) Remote I/O R3 Series
Remote I/O R3 Series FL-net INTERFACE MODULE (OPCN-2, Ver.2. supported) Functions & Features FL-net (OPCN-2), Ethernet based, controller level network, compatible remote I/O 1 Mbps/1 Mbps cyclic transmission
MODEL: M1EXM. OUTPUT Field-selectable DC Output Current output: 0-20 ma DC Voltage output: V DC Voltage output: V DC
2 Channel Super-mini Signal Conditioners with Display M1E Series POTENTIOMETER TRANSMITTER (2 channels, PC programmable) Functions & Features Potentiometer s zero/span points can be captured by onsite
MODEL: M5DY SEN TRONIC AG CURRENT LOOP SUPPLY. [2] POWER INPUT AC Power M: V AC (Operational voltage range V, Hz)
![MODEL: M5DY SEN TRONIC AG CURRENT LOOP SUPPLY. [2] POWER INPUT AC Power M: V AC (Operational voltage range V, Hz)](/thumbs/90/103899684.jpg "MODEL: M5DY SEN TRONIC AG CURRENT LOOP SUPPLY. [2] POWER INPUT AC Power M: V AC (Operational voltage range V, Hz)")
Super-mini Terminal Block Signal Conditioners M5-UNIT CURRENT LOOP SUPPLY Functions & Features Powering a 0 ma DC current loop Applicable to smart transmitters Isolation between the input and output Fast
R3-NE1 ETHERNET INTERFACE MODULE MODEL. Remote I/O R3 Series. (Modbus/TCP)
Remote I/O R Series ETHERNET INTERFACE MODULE (Modbus/TCP) MODEL R-NE MODEL & SUFFIX CODE SELECTION R NE MODEL POWER INPUT K : V AC L : V AC R : V DC N : No power supply * *. Choose N (no power supply)
MODEL: SC100. Single Loop Controller Series. MULTI-FUNCTION PID CONTROLLER (color LCD with touch-panel) MODEL: SC100 [1]0 [2][3]
![MODEL: SC100. Single Loop Controller Series. MULTI-FUNCTION PID CONTROLLER (color LCD with touch-panel) MODEL: SC100 [1]0 [2][3]](/thumbs/79/79163563.jpg "MODEL: SC100. Single Loop Controller Series. MULTI-FUNCTION PID CONTROLLER (color LCD with touch-panel) MODEL: SC100 [1]0 [2][3]")
Single Loop Controller Series MULTI-FUNCTION PID CONTROLLER (color LCD with touch-panel) 44 (5.67) 7 (.83) * mm (inch) *Selectable with option code /4: 400 mm /6: 600 mm Language blank: Japanese /E: English
Digital I/O Units Compatible with MULTIPLE I/O TERMINAL
Digital I/O Units T-@D(-)/@DMX(-)/@DML(-)/@DML(-)/@DDS(-) Digital I/O Units Compatible with MULTIPLE I/O TERMAL Terminal block, connector, and high-density connector models are available. The circuit block
R1M-GH THERMOCOUPLE & DC INPUT MODULE MODEL. Remote I/O R1M Series. (16 points)
Remote I/O R1M Series THERMOCOUPLE & DC INPUT MODULE (16 points) MODEL MODEL & SUFFIX CODE SELECTION R1MGH2T MODEL Modbus protocol I/O TYPE GH2 : Thermocouple or DC input, 16 points FIELD TERMINAL TYPE
MODEL: R3-NL1. RELATED PRODUCTS XIF File (Device Interface File) XIF file is used to define a LonWorks device when programmed on LonMaker.
MODEL: R-NL Remote I/O R Series LonWorks INTERFACE MODULE (analog I/O points, discrete I/O 8 points) 7. (.08) 0 (.) 09 (.9) mm (inch) MODEL: R NL [][] ORDERING INFORMATI Code number: R-NL-[][] Specify
MODEL: R2K-1 SEN TRONIC AG. R2K Series
1 MODEL: R2K-1 R2K Series /RS-485 CONVERTER Functions & Features Bidirectional converter between and RS-485 used when connecting Modbus RS-485 devices to a PC CE marking Standard: Conforms to, EIA Transmission
MODEL: IT40SW2. Tower Light Series. [2] LAMP 1 COLOR (1st layer from the top) R: Red Y: Amber G: Green B: Blue W: White
![MODEL: IT40SW2. Tower Light Series. [2] LAMP 1 COLOR (1st layer from the top) R: Red Y: Amber G: Green B: Blue W: White](/thumbs/87/96191417.jpg "MODEL: IT40SW2. Tower Light Series. [2] LAMP 1 COLOR (1st layer from the top) R: Red Y: Amber G: Green B: Blue W: White")
MODEL: IT0SW Tower Light Series WIRELESS LAN TOWER LIGHT (small size, 0 mm dia., Modbus/TCP, access point, - layers) Functions & Features Lighting, blinking and buzzing available with contact input or
MODEL: GR8-EM. Communication Adaptor GR8 Series
Communication Adaptor GR8 Series Ethernet/RS-485 Adaptor (Modbus use) Functions & Features Bidirectional protocol converter for Modbus/TCP (Ethernet) and Modbus RTU (RS-485) Fast response time thanks to
MODEL: MAKF. Lightning Surge Protectors for Electronics Equipment M-RESTER
MODEL: Lightning Surge Protectors for Electronics Equipment M-RESTER OE-PORT SURE PROTECTOR FOR POWER SUPPLY USE Functions & Features Designed to protect electronics equipment from induced lightning surges
MODEL: R3-NE1. Remote I/O R3 Series. ETHERNET INTERFACE MODULE (Modbus/TCP) 27.5 (1.08)
MODEL: R-NE Remote I/O R Series ETHERNET INTERFACE MODULE (Modbus/TCP) 7. (.8) 9 (.9) (.) mm (inch) MODEL: R-NE-[][] ORDERING INFORMATION Code number: R-NE-[][] Specify a code from below for each [] and
MODEL: R3-NL2. RELATED PRODUCTS XIF File (Device Interface File) XIF file is used to define a LonWorks device when programmed on LonMaker.
MODEL: R-NL Remote I/O R Series LonWorks INTERFACE MODULE (I/O points) 7. (.08) 0 (.) 09 (.9) mm (inch) MODEL: R NL [][] ORDERING INFORMATION Code number: R-NL-[][] Specify a code from below for each []
MODEL: WL40EW2F. Wireless I/O WL40F Series
Wireless I/O WL40F Series WIRELESS GATEWAY Modbus/TCP (Ethernet), Modbus-RTU Transparent 900MHz Band Wireless Device (parent device) 60 (2.36) FUTIONS & FEATURES This unit Incorporates 900MHz band wireless
Product Discontinuation Notices. Discontinuation Notice of Compact proximity sensor TL-M series (for china area only)
PRODUCT NEWS Product Discontinuation Notices August 1, 2011 Proximity Sensors No. 2011248E-2 Discontinuation Notice of Compact proximity sensor (for china area only) Product Discontinuation Recommended
MODEL: MDCAT. Lightning Surge Protectors for Electronics Equipment M-RESTER
Lightning Surge Protectors for Electronics Equipment M-RESTER LIHTNIN SURE PROTECTOR FOR ETHERNET (PoE / 10 BASE-T / 100 BASE-TX / 1000 BASE-T) Functions & Features Designed specifically for Ethernet network
General Specifications
General Specifications LN90 Interface Adapter GENERAL This General Specification (GS) describes the specification for Interface Adapter. This product is a RS-485 signal relay and power supply for the Field
SystempaK (Digital/File Type) Dual Input Arithmetic Relay Module Model J-SCM 92/97
No.SS2-2320-0950 (Rev. 1) SystempaK (Digital/File Type) Dual Input Arithmetic Relay Module Model J-SCM 92/97 Introduction The Dual Input Arithmetic Relay Module is an advanced arithmetic module that can
MODEL: MD7ST. [3] LOOP DISCONNECT FUSE 0: Without 1: With (CENELEC/ATEX approval Not selectable)
![MODEL: MD7ST. [3] LOOP DISCONNECT FUSE 0: Without 1: With (CENELEC/ATEX approval Not selectable)](/thumbs/75/72960218.jpg "MODEL: MD7ST. [3] LOOP DISCONNECT FUSE 0: Without 1: With (CENELEC/ATEX approval Not selectable)")
MODEL: MDST Lightning Surge Protectors for Electronics Equipment M-RESTER LIGHTNING SURGE PROTECTOR FOR STANDARD SIGNAL LINE (ultra-slim) Functions & Features High discharge current capacity 0 ka ( / 0μs),
Pin plunger D2JW-011 D2JW-011-MD. Short hinge lever D2JW-01K1A1 D2JW-01K1A1-MD. Hinge lever D2JW-01K11 D2JW-01K11-MD
Sealed Snap ction Switch DJW Immersion-Proof Subminiature Snap ction Switch Ultra-small and highly sealed Water-tight housing conforming to IEC IP67 Wide range of operating temperature from -40 to 85 C
MODEL: M2EXM. Super-mini Signal Conditioners with Display Mini-M M2E Series
MODEL: MEXM Super-mini Signal Conditioners with Mini-M ME Series POTENTIOMETER TRANSMITTER (PC programmable) Functions & Features Provides a DC output proportional to a potentiometer or slidewire position
POE084824B. PoE 54V/8x0,3A/4x7Ah PoE buffer power supply for up to 8 IP camera. v.1.1 EN* Edition: 7 from
POE084824B v.1.1 PoE 54V/8x0,3A/4x7Ah PoE buffer power supply for up to 8 IP camera. EN* Edition: 7 from 15.11.2017 Supersedes the edition: 6 from 22.11.2016 GREEN POWER CCTV PoE PSU features: DC 54V uninterruptible
Contact form. Operating Force. SPDT 100g Unsealed Solder / 187 Quick Connect. SPDT 200g Unsealed Solder / 187 Quick Connect
V Miniature Snap Action Switch Industry standard design with 10/15 Amp ratings Long mechanical life of 50,000,000 operations minimum Available in either thermoplastic or thermosetting resin Can be used
MODEL: 43AL1. Digital Panel Meters 43 Series
Digital Panel Meters 43 Series LOOP POWERED DIGITAL PANEL METER (process meter) Functions & Features Loop powered -1999 to 9999 compact digital meter Scaling function Screwless spring terminal 24 (.94)
Self-Powered Counters H7EC
Self-Powered Counters Subminiature Count Totalizers Require No External Power Supply Subminiature 8 x mm (1.89 x.9 in) Improved noise immunity Screw terminal and wire-wrap types available AC, DC, and no-voltage
Cylindrical Proximity Sensor
Cylindrical Proximity Sensor A New Series of Easy-to-use and Tough Models with a Yellow Indicator New series of TL-X2C1-GE models with improved performance over the previous TL-X-E models. Also, in addition
XW3B. Connector Terminal Boxes. Ratings and Specifications. Compatible Connectors. Materials and Finish
es XWB Series Includes New Lightweight, Low-profile Connector Terminal Boxes for Use Outside of Control Boxes to Centralize I/O with Reduced Labor and Greater Environmental Resistance Tough model with
SA1E: Photoelectric Switches. Polarized Retroreflective Type. Through-beam Type
SAE: Photoelectric Simple, compact design for world-wide usage. Key features of the SAE photoelectric sensor include: Four sensing methods Cable types and M8 connector types available NPN output, PNP output,
MODEL: 47LYV. Digital Panel Meters 47 Series
Digital Panel Meters 47 Series DC INPUT DIGITAL PANEL METER (4 1/2 digit, process meter, LED display type) Functions & Features 4 ½ digit DC input digital panel meter 1/8 DIN size Moving average function
Inductive Proximity Sensor
Inductive Proximity Sensor Miniature, Slim-styled Proximity Sensor Space-saving Sensor ideal for timing cam and dog detection. Four mounting holes provided: two each mounting from side or rear of the housing.
Contact form. Operating Force. SPDT 25g Unsealed Solder / 187 Quick Connect. SPDT 50g Unsealed Solder / 187 Quick Connect
VX Miniature Snap Action Switch Compact snap action switch with low force operation Internal mechanism assures outstanding contact reliability Models available for micro load up through 5 Amps ROHS Compliant
R1M-GH BEFORE USE... POINTS OF CAUTION INSTRUCTION MANUAL PC RECORDER MODEL. (thermocouple or DC input, 16 points)
INSTRUCTION MANUAL PC RECORDER (thermocouple or DC input, points) MODEL RM-GH BEFORE USE... Thank you for choosing M-System. Before use, please check contents of the package you received as outlined below.
masterelectronics.com onlinecomponents.com
Basic Switch MINIATURE Watertight Miniature Basic Switch High-quality watertight, high-precision miniature basic switch meets IP67 requirements (IEC 529) Monoblock construction assures high sealing capability
General Specifications
General Specifications GS 32Q06L20-31E Terminal Boards/ Relay Boards (for ProSafe-RS) GENERAL This GS describes the hardware specifications of the terminal boards used for the ProSafe-RS system. STANDARD
Ordering Information. Snap Action Switch V. Model Number Legend V General Purpose Snap Action Switch. Snap Action Switch V 121
Snap ction Switch V General Purpose Snap ction Switch Industry standard design with switching currents of 10 to 21 Widely used for applications where long life expectancy and high reliability is required.
Thread length (overall length) material
Cylindrical Proximity Sensor for Mobile Usage Designed and tested to keep your machines moving IP69k tested and certified for highest water resistance e1 type approval (according to automotive directive
RE48ATM12MW on-delay timing relay s..300 h V AC - 2 OC
Characteristics on-delay timing relay - 0.02 s..300 h - 24..240 V AC - 2 OC Complementary Product front plate size Control type Housing material Main Range of product Product or component type Electrical
DIO-0808RN-USB. N Series for USB Isolated Digital I/O Unit(8ch Relay Output, 8ch DI) DIO-0808RN-USB 1. Ver.1.02
N Series for USB Isolated Digital I/O Unit(8ch Relay Output, 8ch DI) DIO-0808RN-USB *The above photograph is DIO-1616HN-USB. * Specifications, color and design of the products are subject to change without
Basic Switch. Pin plunger Short hinge Hinge lever Long hinge lever Simulated hinge Short hinge Hinge roller lever lever roller lever lever
Basic Switch MINIATURE Watertight Miniature Basic Switch High-quality watertight, high-precision miniature basic switch meets IP67 requirements IEC 529 (lead wire type) Monoblock construction assures high
must Operate Voltage (V)
force-guided relays g7sa G7SA compact, Slim relays conforming to en Standards Relays with forcibly guided contacts (EN50205 Class A, certifi ed by VDE) Supports the CE marking of machinery (Machinery Directive)
MODEL: 6DV-B. [2] TERMINAL BLOCK 0: None (Euro terminal block at the rear of indicator module)
![MODEL: 6DV-B. [2] TERMINAL BLOCK 0: None (Euro terminal block at the rear of indicator module)](/thumbs/95/126294523.jpg "MODEL: 6DV-B. [2] TERMINAL BLOCK 0: None (Euro terminal block at the rear of indicator module)")
Field-mounted Two-wire Signal Conditioners 6-UNIT -DIGIT LOOP POWERED INDICATOR (outdoor enclosure, intrinsically safe/explosion-proof) Functions & Features -digit LED display No external power source
MODEL: 40DN. Digital Panel Meters 40 Series
Digital Panel Meters 40 Series LOOP POWERED DIGITAL PANEL METER (4 digits, process meter) Functions & Features 4 digit (±9999) loop powered panel meter No external power source needed Scaling function
MODEL: DL8. POWER INPUT DC power R: 24 V DC (Operational voltage range: ±10 %; ripple 10 %p-p max.) Web Data Logger DL8
Web Data Logger DL8 WEB-ENABLED REMOTE TERMINAL UNIT Functions and features Remote monitoring of equipment and plants by using modern communication infrastructure Monitoring and logging of a wide variety
R6-NC1 BEFORE USE... POINTS OF CAUTION. INSTRUCTION MANUAL CC-Link INTERFACE MODULE MODEL. (CC-Link Ver.1.10; for 16-point analog signals)
INSTRUCTION MANUAL CC-Link INTERFACE MODULE (CC-Link Ver..; for -point analog signals) MODEL R-NC BEFORE USE... Thank you for choosing M-System. Before use, please check contents of the package you received
4 mm. 8 mm. Proximity Sensor. Sensing head Sensing distance Output configuration Part Number M18 Shielded 4 mm DC 3-wire PNP-NO E2EZ-X4B1 M30
Sensing distance Supply voltage Output 4 mm 8 mm 12 to 24 VDC 100 to 220 VAC 200 ma max. 100 ma max. Proximity Sensor Detects Objects without Being Influenced by Aluminum and Cast Iron Cut Chips Sense
MODEL: MAT3. [2] ALARM OUTPUT A: With Y: Without. Lightning Surge Protectors for Electronics Equipment M-RESTER
![MODEL: MAT3. [2] ALARM OUTPUT A: With Y: Without. Lightning Surge Protectors for Electronics Equipment M-RESTER](/thumbs/85/93017198.jpg "MODEL: MAT3. [2] ALARM OUTPUT A: With Y: Without. Lightning Surge Protectors for Electronics Equipment M-RESTER")
MODEL: MAT Lightning Surge Protectors for Electronics Equipment M-RESTER LIHTI SURE PROTETOR FOR THREE-PHASE POWER SUPPLY Functions & Features onnected in parallel between the power and earth lines regardless
PRCMT18-5DO PRCMT18-5DC PRCMT18-5DO-I PRCMT18-5DC-I
PRCM Series Cylindrical Connector Type Proximity Sensor Features Improved the noise immunity with dedicated IC Built-in reverse polarity protection circuit (DC -wire type) Built-in surge protection circuit
HIGH POWER CONTACT ELECTRICAL SPECIFICATIONS
HIGH POWER CONTACT ELECTRICAL SPECIFICATIONS 11.12.438 8.83.348 5.72.225 8.83.348 11.12.438 12.70.500 Receiver Contact Part # 610 149 101 38.48 1.515 36.20 1.425 12.70.500 ITA Contact Part # 610 150 101
HIGH PERFORMANCE MINIATURE SWITCHES WITH WIDE RANGE
HIGH PERFORMANCE MINIATURE SWITCHES WITH WIDE RANGE NV (AH7) SWITCHES FEATURES Extra long-life spring mechanism More than 10 7 mechanical operations, 10 electrical High contact rating of 1 Amps with an
DPST-NO None 2 channels Auto-reset Inverse (+/-) 24 VAC/VDC 4 G9SB-2002-A 1 channel or 2
Safety Relay Unit Ultra Slim Safety Relay Unit 17.5 mm wide models available with 2 or 3 poles. 22.5 mm wide 3 pole models also available EN Standards (TÜV approval) DIN-track mounting possible Ordering
iologik 4000 Series (M) Modules
iologik 4000 Series (M) s Remote I/O modules Features and Benefits I/O expansion without a backplane Active communication with MX-AOPC UA Server Supports SNMP v1/v2c Easy configuration with Modular ioadmin
Actuator Terminal Model
Sealed Snap ction Switch D2VW Watertight Miniature Snap ction Switch High-quality watertight, high-precision miniature Snap ction switch. Switch Body meets IP67 requirements Use of epoxy resin assures
PWR. Power Module Slots
INSTRUCTION MANUAL ETHERNET INTERFACE MODULE (Modbus/TCP) MODEL BEFORE USE... Thank you for choosing M-System. Before use, please check the contents of the package you received as outlined below. If you
IST ULTRASTAB Power Supply for high precision transducers
IST ULTRASTAB Power Supply for high precision transducers High performance 6-channel power supply for multi-channel laboratory measurement applications. Features Current output or ±0 V voltage output (see
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment
Artisan Technology roup is your source for quality new and certified-used/pre-owned equipment FAST SHIPPIN AND DELIERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED
Solid-state Timer H3FA. Model Number Structure. DIP Model Timer for PC Board Use Provides Contact and Solid-state Output
Solid-state Timer H3FA Please read and understand this catalog before purchasing the products. Please consult OMRON representative if you have any questions or comments. Refer to Warranty and Application
CONTENTS 1. BEFORE USE GENERAL DESCRIPTION POINTS OF CAUTION HARDWARE SPECIFICATIONS... 4
INSTRUCTION MANUAL COMMUNICATION CONTROLLER (DeviceNet) MODEL M2BD CONTENTS 1. BEFORE USE... 2 2. GENERAL DESCRIPTION... 2 3. POINTS OF CAUTION... 3 4. HARDWARE SPECIFICATIONS... 4 4.1. M2BD-x1 (suffix
E4PA. Ultrasonic Displacement Sensor. Ordering Information
Ultrasonic Displacement Sensor Ideal for controlling liquid level. Long sensing distance and high-resolution analog output. High-precision detection with a wide range of measurements Four types of Sensors
MCX08M2 Programmable controller
Data sheet MCX08M2 Programmable controller MCX08M2 is an electronic controller that holds all the typical functionalities of MCX controllers in the compact size of 8 DIN modules: programmability connection
10-Port Industrial USB 3.0 Hub - ESD and Surge Protection. StarTech ID: ST1030USBM
10-Port Industrial USB 3.0 Hub - ESD and Surge Protection StarTech ID: ST1030USBM This 10-port USB 3.0 hub gives you the scalability you need in harsh industrial environments. It s designed to meet the
Temperature Controller E5C4
Temperature Controller 1/16 DIN Sized, Digital-Set Controller Features Easy-to-Read LED Display Proportional-derivative (PD) control or ON/OFF control models Front panel offset adjustment on PD controllers
ES1 Infrared Temperature Sensors Were Discontinued; Replace with ES1-N Series Coming September 2017
NO: TC-087 PRODUCT: ES1 Infrared Temperature Sensors DATE: June 2017 TYPE: Discontinuation Notice Update ES1 Infrared Temperature Sensors Were Discontinued; Replace with ES1-N Series Coming September 2017
MODEL: 40DR SEN TRONIC AG. Digital Panel Meters 40 Series
Digital Panel Meters 40 Series RTD INPUT DIGITA PANE METER (4 digits, process meter) Functions & Features 4 digit (±9999) panel meter functions igh visible, 0.8" (20.3mm) high and bright ED 48 (1.89) mm
Miniature Basic Switch
Miniature Basic Switch Reliable and Safe Basic Switch Self-cleaning contacts. Best-seller Switches with switching currents of 10 to 21 A. Can be used for shutting down current in doors. Widely used for
Special-purpose Basic Switch
Special-purpose Basic Switch DPDT Basic Switch for Two Independent Circuit Control Incorporates two completely independent built-in switches. Ideal for switching the circuits operating on two different
I-7520: RS-232 to RS-485. Input: RS-232 protocol Output:RS-485/RS-422 Speed: Self Tuner 'inside, auto switching baud rate, 300~ BPS
I-7520 RS-232 to RS-485 Converter I-7510 RS-485 Repeater RS-232 RS-485 I-7000 SERIES Common Specifications Isolation voltage: 3000VDC Speed: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115000 Dual watchdog
MODEL: MD7TC. Lightning Surge Protectors for Electronics Equipment M-RESTER
MODEL: MDTC Lightning Surge Protectors for Electronics Equipment M-RESTER LIGHTNING SURGE PROTECTOR FOR THERMOCOUPLE USE (ultra-slim) Functions & Features High discharge current capacity 0 ka ( / 0 μs),
MODEL: MDCAT. Lightning Surge Protectors for Electronics Equipment M-RESTER
Lightning Surge Protectors for Electronics Equipment M-RESTER LIHTNIN SURE PROTECTOR FOR ETHERNET (PoE / 10 BASE-T / 100 BASE-TX / 1000 BASE-T) Functions & Features Designed specifically for Ethernet network
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Basic Switch SUBMINIATURE Subminiature Basic Switch Economical, subminiature
D2VW. Sealed Miniature Basic Switch. Ordering Information Model Number Legend D2VW- -
Sealed Miniature Basic Switch Sealed Miniature Basic Switch Conforms to IP67 (Molded Lead Wire Type Only) Use of epoxy resin assures stable sealing, making this switch ideal for places subject to water
16 g SS-01GL-FD SS-01GL-F SS-01GL-FT 50 g SS-01GLD SS-01GLD1 SS-01GLD2 SS-01GL SS-01GLT Simulated roller lever
Snap Action Switch SS Subminiature Snap Action Switch Economical, subminiature snap action switch offers long service life (30 million operations minimum) All models are free from overtravel restrictions,
Oil-resistive, Long-range Photoelectric Sensor with Metal Housing
Oil-resistive, Long-range with Metal Housing ES-C Water- and Oil-resistive with Metal Housing Used for Long-range Sensing Satisfies the water- and oil-resistive requirements and safe enough for use in
Sensing method Appearance Connection method Sensing distance Part number NPN output PNP output Through-beam Prewired (2 m) E3Z-T61A E3Z-T81A 10 m
Through-Beam Sensor with Visible Red LED Visible Beam Allows Visual Confirmation of the Detection Spot, for Easy Installation and Maintenance Built-in amplifier Mutual interference protection filter included
XH2. Half-pitch Board-to-Board Connectors
Half-pitch Board-to-Board Connectors XH2 Allows High-density Mounting for Electronic Devices. A Half-Pitch Connector with a 1.27-mm Pitch for Compactness. A pitch of 1.27 mm for high-density mounting of
Combine Relays and P7TF Block Bases to match your application requirements. Use the table below to configure Relay Blocks.
9 Relay I/O Block Reduces Wiring within the Control Panel and Reduces Installation Time 1 Compact 16-pt models: 182 W l 85 D l 68 H mm; 8-pt block width is 102 mm 1 Can be connected to the PLC with a connecting
Switching Power Supply
Switching Power Supply Miniature, Thin Power Supply to Be Built into Equipment Half the size of OMRON s conventional power supply. PCB-type and connector-type models available. UL, CSA approved. Conforming
BNC08128C. BNC 13,8V/8x1A/17Ah. Switch mode buffer power supply unit for CCTV. v.1.0 EN** Edition: 3 from
BNC08128C v.1.0 BNC 13,8V/8x1A/17Ah Switch mode buffer power supply unit for CCTV. EN** Edition: 3 from 15.05.2014 Supersedes the edition: 2 from 25.03.2014 GREEN POWER CCTV BNC PSU features: DC 13,8V/8x1A
Redundant System Redundant System P9-1-1
.. P-- Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - P-- idcs-8830/idcs-8830r - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
SYSMAC Remote Transistor Module
9 SYSMAC Remote Transistor Module Ultra-compact Remote I/O Modules to Match Most Applications 1 4-point, 8-point and 16-point models 1 4-point models measure 82 W x 32 D x 64.5 H mm; 8- and 16-point models
onlinecomponents.com
0.9 For FPC FPC connectors (0.3mm pitch) Back lock Y3B Series New FEATURES 1. Slim and low profile design (Pitch: 0.3 mm) The use of a back lock mechanism enables a 3.15 mm (with lever) low profile design.
Installation Sensing distance Connection Output configuration Operation mode NO Operation mode NC
Standard (thin shape) Inductive Proximity Sensor Thin shape for space saving surface mounting Direct side wall mounting for bracket-less installation Ordering Information DC 3-wire Models Installation
IOC4T. Input / output card. » From the Vibro-Meter product line» Signal interface card with 6 channels, for the MPC4 machinery protection card
FEATURES» From the Vibro-Meter product line» Signal interface card with 6 channels, for the MPC4 machinery protection card» Screw terminal strip (48 terminals) for all input / output connections» Contains
R6-NE1 BEFORE USE... POINTS OF CAUTION INSTRUCTION MANUAL ETHERNET INTERFACE MODULE MODEL. (Modbus/TCP, for 32-point analog signals)
INSTRUCTION MANUAL ETHERNET INTERFACE MODULE (Modbus/TCP, for 32-point analog signals) MODEL R6-NE1 BEFORE USE... Thank you for choosing M-System. Before use, please check contents of the package you received
R1M-GH BEFORE USE... POINTS OF CAUTION INSTRUCTION MANUAL PC RECORDER MODEL. (thermocouple or DC input, 16 points)
INSTRUCTION MANUAL PC RECORDER (thermocouple or DC input, points) MODEL BEFORE USE... Thank you for choosing M-System. Before use, please check contents of the package you received as outlined below. If
EXPANSION PERIPHERAL CVM-R10 C. (Code ) INSTRUCTION MANUAL ( M / 00 A ) (c) CIRCUTOR S.A.
EXPANSION PERIPHERAL CVM-R10 C (Code 7 70 217 ) INSTRUCTION MANUAL ( M 981 170 / 00 A ) (c) CIRCUTOR S.A. ------ CVM-R10 C Peripheral --------------- Pag. 1 CVM-R10C EXPANSION PERIPHERAL 1.- DESCRIPTION
D2SW-3L1HS D2SW-01L1HS
Sealed Snap Action Switch D2SW Watertight Miniature Snap Action Switch High-quality watertight miniature Snap Action switch. Switch Body meets IP67 (IEC 529) requirements Monoblock construction assures
Ferrous metal (The sensing distance decreases with non-ferrous metal.) Power supply voltage (operating voltage range)
Description The sensors provide excellent results even with difficult-to-detect objects, e.g. small or thin parts, wires or bright metals. A variety of types cover a wide range of individual requirements
CJ1W-PTS/PDC/PH41U/AD04U
CJ-series Process Analog I/O Unit A Single Unit Handling All Types of Inputs such as Temperature Sensor Inputs and Analog Signal Inputs (e.g., 4 to 20 ma or 1 to 5 V) A Unit supports four input channels,
Signal Connections CHAPTER
2 CHAPTER 3 Signal Connections This chapter provides useful information on how to connect input and output signals to the USB-4704 via the I/O connectors. Sections include: Overview I/O Connectors Analog
E3S-A. Built-in Amplifier Photoelectric Sensor (Medium Size) Ordering Information. Built-in Amplifier Photoelectric Sensors. Horizontal. 7 m.
Built-in Amplifier (Medium Size) ES-A Be sure to read Safety Precautions on page 0. Ordering Information Built-in Amplifier s Red light Infrared light Sensing method Appearance Connection method Sensing