Call for ideas & GEMCO Work Plan

Transcription

1 Call for ideas & GEMCO Work Plan Euromed GNSS II project/medusa GEMCO Launching Event, Tunis, 23 October

2 Index Call for ideas Work Plan Next steps Conclusions GEMCO Launching Event, Tunis, 23 October

3 Call for ideas - objectives To gather concrete ideas for feeding GEMCO Work Plan To ensure the involvement of all countries (invitation sent out to MEDUSA list of contacts) GEMCO Launching Event, Tunis, 23 October

4 Call for ideas - results (1) 30 ideas + 2 additional, 5 countries Various multiple ideas A bit vague in a few cases (to be further investigated) Out of scope in a few cases Too ambitious in a few cases (and cannot be implementable in the frame of MEDUSA assistance action, e.g. not really a small project, generally the subject of a procurement contract, however interesting as providing inputs to learn about needs) Common ideas from different countries especially for civil aviation In some cases repetition of actions already done in METIS or planned in MEDUSA (e.g. trainings and workshops) All ideas will be further investigated by MEDUSA, also to probe the interest/commitment of the originator GEMCO Launching Event, Tunis, 23 October

5 Call for ideas - results (2) GEMCO Launching Event, Tunis, 23 October

6 Call for ideas - results (3) GEMCO Launching Event, Tunis, 23 October

7 Call for ideas - by-product Interest stimulated Themes of interest per country gathered Countries not yet represented in the Euromed GNSS WG involved (i.e. Egypt) METIS assessment for region priorities confirmed Interested and committed stakeholders identified (e.g. research entities, universities, institutions with operational/technical capability, small enterprises/start-up) and relevant heritages Attention of EU stakeholders raised GEMCO Launching Event, Tunis, 23 October

8 Call for ideas - elaboration steps Evaluation by a committee of 3 independent experts (EC, GSA and a consultant) Further analysis by MEDUSA, also contacting/involving the originator Conveying the idea into an assistance action, firstly proposed to the originator and then to EC for comments/approval (iterations) Implementation GEMCO Work Plan consists of various assistance actions: National Sub-regional Regional Covering all countries Involving GEMCO in the implementation Within MEDUSA time frame GEMCO Launching Event, Tunis, 23 October

9 Call for ideas - assistance action (1) Rationale: Answering to needs Further to a submitted idea, or vis-à-vis discussions in occasion of the national workshops, sub-regional common motivations, specific country(ies) request for assistance in the decision-making process, etc. EC s specific requests addressing the Euromed region Objective: well focused objective and clear/tangible outcomes Tasks: involving MEDUSA s experts, further support (if needed) Timing: within MEDUSA Possible follow-up: generating opportunities for GEMCO s long-term perspectives Mandatory condition: active participation/contribution of the originator/country GEMCO Launching Event, Tunis, 23 October

10 Call for ideas - assistance action (2) The outcomes will be publicly available (on GEMCO elibrary) for: Follow-up (involved countries) Interest stimulation (other countries) EC s use Where we are now: Some assistance actions have been already launched Others are under finalization All ideas will be analysed and considered for being possibly turned into assistance actions (some ideas chased for today s event) The submission of further ideas can always be possible GEMCO Launching Event, Tunis, 23 October

11 EGNOS service demonstration for Civil Aviation (1) Flight validation of RNAV APCH for Monastir airport RNAV APCH procedures design for RWY 07 (currently ILS) and RWY 25 (currently NPA) FAS data blocks codification Airborne data bases generation 2 validation flight trials for RWY 07 & for RWY 25 Safety Case Business Assessment Installation and operation of a GPS/EGNOS receiver for GNSS performance monitoring List of to-dos for the operational introduction/procedures publication Technical assistance to start the process for procedures publication GEMCO Launching Event, Tunis, 23 October

12 EGNOS service demonstration for Civil Aviation (2) Generated additional assistance actions: October 2013: sub-regional technical workshop on LPV operational implementation May 2014: final workshop open to the civil aviation community of all Euromed countries (in Tunisi hosted by GEMCO) On-going: elaboration of a methodology for the implementation of the ICAO s recommendation regarding GNSS data recording and monitoring, concerning its implementation and practical aspects GEMCO Launching Event, Tunis, 23 October

13 Support to EC EC s planning for the deployment of the infrastructures necessary to extend the EGNOS service coverage across the Euromed area Identification of priority airdromes with favourable conditions for the implementation of SBAS based APCH procedures in each country Definition of the suitable institutional and regulatory frame for EGNOS operational implementation in civil aviation information about decision-makers and process for PBN procedure approval/publication analysis of agreement for civil aviation safety harmonisation/regulatory equivalence between the States and Single European Sky relevant regulations Contribution from countries Involvement of ESSP (next step) GEMCO Launching Event, Tunis, 23 October

14 RNAV APCH procedures Development of RNAV APCH procedures including safety case and business assessment in two concrete cases/airports purposely selected: Bejaia (Algeria) Beirut (Lebanon) GEMCO Launching Event, Tunis, 23 October

15 Imparting a deeper understanding on EGNOS EGNOS Bulletin and Performance Reports (e.g. monthly, yearly) Accessing/using EDAS Using PEGASUS (and other tools) Integrating/connecting the GPS/EGNOS receiver in Tunisia (operated by GEMCO) to the EDCN network GEMCO Launching Event, Tunis, 23 October

16 EGNOS service demonstration for freight transport/intermodality Tracking & tracing intermodal containers on a real business case Shipment from Jordan (Aqaba port) Best practice launch/operational introduction Final workshop open to the interested communities of all Euromed countries (in Amman, to be confirmed) GEMCO Launching Event, Tunis, 23 October

17 Others Hosting thematic meetings/workshops, e.g. Euromed ANSPs meetings MoU/agreements Exploring/pursuing synergy and cross-fertilization with other initiatives (e.g. Horizon2020) for the long-term perspective GEMCO legal entity GEMCO Launching Event, Tunis, 23 October

18 GEMCO Web page and elibrary Accessible via MEDUSA Web page on the Euromed Transport Web Site Under the section Other Activities in EN and FR Web library Web library GEMCO GEMCO Launching Event, Tunis, 23 October

19 GEMCO elibrary Information package on EGNOS (general and various markets) Promotion and communication material for awareness Training material (produced in MEDUSA) Material of the assistance actions 1. EGNOS Applications 2. European GNSS EGNOS 3. European GNSS Evolution 1. EGNOS Applications 1.1 High precise Positioning Geodesy Multi GNSS, High precision, Urban Mapping 4. European GNSS Galileo 5. GNSS fundamentals 6. Integrity 7. Market Researches 8. Miscellaneous 1.2 Research 1.3 Transport Civil Aviation Freights and logistics Maritime Rail Road 9. Work Plan Assistance action 1 name Assistance action 2 name GEMCO Launching Event, Tunis, 23 October

20 Next steps Evaluating remaining ideas/discussion with originators Gathering further ideas Finalizing/launching the already identified/elaborated assistance actions GEMCO Launching Event, Tunis, 23 October

21 Conclusions GEMCO is an opportunity It is fundamental to think to a long-term perspective, from now MEDUSA s aid is ensured EC s support is needed (also for the long-term) Euromed countries commitment is required GEMCO contact: gemco.medusa@outlook.com GEMCO Launching Event, Tunis, 23 October

22 GEMCO Launching Event, Tunis, 23 October