Electrical Specifications Typical Characteristics, on 72 x 50 mm PCB. Center Frequency fₒ (GHz) Feed Point Impedance
|
|
|
- Juniper Hopkins
- 5 years ago
- Views:
Transcription
1 Part No GPS/GLONASS/Beidou/Galileo FR4 (On/Off Ground) 1.561, 1.575, GHz Supports: Tracking, Smart Home, Agriculture, Automotive, Healthcare, Digital Signage, Wearables, Industrial Devices DATASHEET Part No Product: GNSS Patch Ethertronics antennas deliver on the key needs of device designers for higher functionality and performance in smaller/thinner designs. These innovative antennas provide compelling advantages for GHz enabled handheld devices, media players and other mobile devices. Real-World Performance and Implementation s may look alike on the outside, but the important difference is inside. Other antennas may contain simple PIFA or monopole designs that interact with their surroundings, complicating layout or changing performance with use position. Ethertronics antennas utilize patented Isolated Magnetic Dipole (IMD) technology to deliver a unique size and performance combination. GPS / GLONASS / Beidou / Galileo FR GHz Greater Flexibility Ethertronics IMD technology enables the advance antenna design that delivers superior performance in reception critical applications is capable for off-ground and on-ground (over metal) environments. Electrical Specifications Typical Characteristics, on 72 x 50 mm PCB Frequency (GHz) KEY BENEFITS Stay-in-Tune IMD antenna technology provides superior RF field containment, resulting in less interaction with surrounding components. Quicker Time-to-Market By optimizing antenna size, performance and emissions, customer and regulatory specifications are more easily met. Reliability Products are the latest RoHS version compliant. Embedded design Cellular, Headsets, Tablets Gateway, Access Point Handheld Telematics Tracking Healthcare M2M, Industrial devices Smart Grid OBD-II Mounting Mechanical Specifications & Ordering Part Number APPLICATIONS Ordering Part Number Size (mm) 22.0 x 3.2 x 3.3 Mounting Surface mounted to the PCB Weight (grams) 0.45 Packaging Off Ground / On Ground GNSS Bands Beidou GPS Galileo Glonass Peak Gain (dbi) 0.96 / / / / Efficiency (%) 72 / / / / 41 Center Frequency fₒ (GHz) VSWR 1.5:1 / 2.5:1 Feed Point Impedance 50 Ω unbalanced Tape & Reel Demo Board /8/2018 Proprietary
2 1.575 GHz Ethertronics Embedded Specifications. Dimensions Typical antenna dimensions (mm) Part Number A (mm) B (mm) C (mm) ± ± ± 0.3 A Via B Top View C Height Pin Descriptions Pin# Description 1 Feed 2 Dummy Pad 3 Dummy Pad 4 Dummy Pad Pin #4 Pin #3 Pin #2 Pin #1 Via Bottom View
3 VSWR (:1) Efficiency (%) DATASHEET Part No GHz Ethertronics Embedded Specifications. VSWR and Efficiency Plots (Off-Ground) Typical Performances on 72 x 50 mm PCB VSWR Efficiency Radiation Patterns (Off-Ground) Typical Performances on 72 x 50 mm PCB GHz Z X Y
4 1.575 GHz Ethertronics Embedded Specifications. Layout (Off-Ground) Typical layout dimensions (mm) Pin #4 Pin #3 Pin #2 Pin #1 * VIAS: Diam. 0.2mm, (no vias on transmission lines). Via holes must be covered by solder mask Pin Descriptions Pin# Description 1 Feed 2 Dummy Pad 3 Dummy Pad 4 Dummy Pad Matching Pi Network (Demo Board) Component Value Tolerance DNI N/A 4.3pF ±0.25pF 1pF ±0.5pF 0Ω N/A *Actual matching values depend on customer design 50ohm
5 VSWR (:1) Efficiency (%) DATASHEET Part No GHz Ethertronics Embedded Specifications. VSWR and Efficiency Plots (On-Ground) Typical Performances on 72 x 50 mm PCB VSWR Efficiency Radiation Patterns (On-Ground) Typical Performances on 50 x 72 mm PCB GHz Z X Y
6 1.575 GHz Ethertronics Embedded Specifications. Layout (On-Ground) Typical layout dimensions (mm) Pin #4 Pin #3 Pin #2 Pin #1 * VIAS: Diam. 0.2mm, (no vias on transmission lines). Via holes must be covered by solder mask Pin Descriptions Pin# Description 1 Feed 2 Dummy Pad 3 Dummy Pad 4 Dummy Pad Matching Pi Network (Demo Board) Component Value Tolerance 2.4pF ±0.1pF 0Ω N/A DNI N/A 0Ω N/A *Actual matching values depend on customer design 50ohm
7 1.575 GHz Ethertronics Embedded Specifications. Demo Board Off-Ground Part Number A (mm) B (mm) C (mm) A A C B
Electrical Specifications Typical Characteristics, on 50 x 70 mm PCB. Mechanical Specifications & Ordering Part Number
DATASHEET Part No. 1001013 Product: 2.4 GHz FR4 Part No. 1001013 Wi-Fi / BT SMD On Ground / Off Ground 2400-2485 MHz Supports: Wi-Fi applications, Agriculture, Automotive, Bluetooth, Zigbee, WLAN, Smart
Part No Stamped Metal Wi-Fi / BT Embedded Antenna
Part No. 1002298 Wi-Fi / BT Dual Band Stamped Metal Embedded Antenna 2.4 / 5 GHz Supports: Wi-Fi applications, Agriculture, Automotive, Bluetooth, igbee, WLAN, Smart Home, Healthcare, Digital Signage DATASHEET
Mechanical Specifications & Ordering Part Number
DATASHEET Part No. 1000146 Product: Wi-Fi / BT / WLAN / Zigbee Embedded Stamped Metal Part No. 1000146 WLAN / BT / Zigbee Embedded Stamped Metal 2.4 / 4.9 / 5.2 / 5.8 GHz (802.11 a/b/g/n/c + Japan) Supports:
ACA-5036-A2-CC-S Specification
1. APPLICATION: WLAN, 802.11b/g, Bluetooth, etc ACA-5036-A2-CC-S Specification 2. Explanation of part number : AC A _ 5036 _ A2 _ CC _ S (1) (2) (3) (4) (5) (6) (7) (1) Product Type:Chip Antenna (2) Center
"High Frequency Ceramic Solutions"
Designed for: BAN, Bluetooth, 802.11, WLAN, igbee, Propietary Protocol, ISM, Smart Energy, WiMax Page 1 of 9 General Specifications Part Number Operating Frequency (MHz) Impedance Operating Temperature
SPECIFICATION. : Pantheon Antenna 4in1 MA760 Screw-Mount (Permanent Mount) 4G/3G/2G MIMO LTE, GPS/GLONASS/GALILEO, Wi-Fi 2.4/5GHz
SPECIFICATION Part No. : MA760.A.ABIC.003 Product Name : Pantheon Antenna 4in1 MA760 Screw-Mount (Permanent Mount) 4G/3G/2G MIMO LTE, GPS/GLONASS/GALILEO, Wi-Fi 2.4/5GHz Feature : 2 x Cellular (4G/3G/2G)
"High Frequency Ceramic Solutions"
Page 1 of 5 This filter is associated with Intel Reference Desing Platform: IRE220 General Specifications Part Number 5697CR45A0360 Operating Passband Freq. 5490-5850 MHz Top View Insertion loss (5490-5670MHz)
Hybrid Couplers 3dB, 90º Type PC2025A2100AT00
GENERAL DESCRIPTION The PC2025A2100AT00 is a RoHS compliant low profile wideband 3dB hybrid coupler which can support mobile applications, including PCS and DCS applications. The power coupler series of
SPECIFICATION. : Pantheon Antenna 3in1 MA.710 Screw-Mount (Permanent Mount) 2 x 2G/3G/4G LTE MIMO Cellular Antenna 1 x GPS/GLONASS Antenna
SPECIFICATION Part No. : MA710.A.ABI.001 Product Name : Pantheon Antenna 3in1 MA.710 Screw-Mount (Permanent Mount) 2 x 2G/3G/4G LTE MIMO Cellular Antenna 1 x GPS/GLONASS Antenna Feature : 2 x Cellular
SPECIFICATION : MA750.A.ABICG.003. : Pantheon Antenna 5in1 MA.750 Screw-Mount (Permanent Mount) 2G/3G/4G MIMO/ GPS/GLONASS/ 2.
SPECIFICATION Part No. Product Name Feature : MA750.A.ABICG.003 : Pantheon Antenna 5in1 MA.750 Screw-Mount (Permanent Mount) 2G/3G/4G MIMO/ GPS/GLONASS/ 2.4/5GHz MIMO : 2 x cellular (2G/3G/4G) Antennas
ELECTRICAL SPECIFICATIONS** Frequency. Power Handling. Directivity. .064±.013 [1.64±0.33] Pin ±.004 [3.05±0.10] Pin 3
![ELECTRICAL SPECIFICATIONS** Frequency. Power Handling. Directivity. .064±.013 [1.64±0.33] Pin ±.004 [3.05±0.10] Pin 3](/thumbs/89/100344529.jpg "ELECTRICAL SPECIFICATIONS** Frequency. Power Handling. Directivity. .064±.013 [1.64±0.33] Pin ±.004 [3.05±0.10] Pin 3")
Pico Xinger 20dB Directional Coupler Description The 1P620 Pico Xinger is a low profile, miniature 20dB directional coupler in an easy to use surface mount package designed for MMDS and WLAN applications.
SPECIFICATION : MA700.A.ABC.001. : Pantheon Antenna 3in1 MA.700 Screw-Mount (Permanent Mount) GPS / LTE Cellular / 2.4GHz / 5GHz Combination Antenna
SPECIFICATION Part No. : MA7.A.ABC.1 Product Name : Pantheon Antenna 3in1 MA.7 Screw-Mount (Permanent Mount) GPS / LTE Cellular / 2.4GHz / 5GHz Combination Antenna Features : Highest Efficiency/Peak Gain
SPECIFICATION : MA700.W.A.ABC.001
SPECIFICATION Part No. : MA7.W.A.ABC.1 Product Name : Pantheon Antenna 3in1 MA7.W Screw-Mount (Permanent Mount) White Version GPS/GLONASS/GALILEO / LTE Cellular / 2.4GHz / GHz Combination Antenna Features
Specification. Pantheon MA750.W.A.ABICG.003. Part No. MA750.W.A.ABICG.003
Pantheon MA7.W.A.ABICG.3 Specification Part No. MA7.W.A.ABICG.3 Product Name Pantheon Antenna in1 MA.7 Screw-Mount (Permanent Mount) 2G/3G/4G (MIMO) GPS-GLONASS 2.4/GHz (MIMO) White Housing Features 2
ELECTRICAL SPECIFICATIONS**
REV A Hybrid Couplers 3 db, 90 Description The 1P503AS Pico Xinger is a low profile, high performance 3dB hybrid coupler in an easy to use manufacturing friendly surface mount package. It is designed for
Echo 12. Specification Document 2. MEASUREMENT Appearance and Dimensions 2. MEASUREMENT. L(Length) W(Width) 5.5. H(Height) 4.
1. SPECIFICATIONS 1.1. Electrical Specifications ITEM GSM850 GSM 900 DCS PCS UMTS Frequency [MHz] 824~894 880~960 1710~1880 1850~1990 1920~2170 Peak Gain [dbi] 0.67 1.56 5.25 5.00 5.52 Eff.[%] @Min 53%
2.4 GHz ISM Band Working Frequency
MULTILER CERMIC NTENN RoHS Compliance 2.4 GHz ISM Band Working Frequency P/N: RFNT95201200T *Contents in this sheet are subject to change without prior notice. Page 1 of 8 SC_RFNT95201200T_V02 pr. 2010
TransferJet RF Coupler Part No. SR4T014 lamiiant Product Specification
TransferJet RF Coupler lamiiant Product Specification 1. Features Coupler for TransferJet applications Short range coupling device for secure data transfer Point to point connectivity SMD mounting Small
GHz db Min db Max Max: Phase Balance. .053±.011 [1.35±0.27] Pin ±.004 [3.05±0.10] Pin 3
![GHz db Min db Max Max: Phase Balance. .053±.011 [1.35±0.27] Pin ±.004 [3.05±0.10] Pin 3](/thumbs/81/84156060.jpg "GHz db Min db Max Max: Phase Balance. .053±.011 [1.35±0.27] Pin ±.004 [3.05±0.10] Pin 3")
` Model 1P603S Hybrid Coupler 3 db, 90 Features: 2.3 2.7 GHz. W-LAN and MMDS Low Loss High Isolation 90 o Quadrature Surface Mountable Tape And Reel Available in Lead-Free (as illustrated) or Tin- Lead
SPECIFICATION PATENTED
SPECIFICATION PATENTED Part No. : TG.30.8112W Product Name : Apex White Right Angle TG.30 Ultra-Wideband 4G LTE Antenna Feature : LTE / GSM / CDMA /DCS /PCS / WCDMA / UMTS / HSDPA / GPRS / EDGE /GPS /Wi-Fi
FX5767 FX GHz DPDT Switch Module. Features. Description. Block Diagram. Application. Broadband support GHz. Compatible with 3G/LTE
FX5767 0.7-3.0GHz DPDT Switch Module Description The FX5767 is a DPDT (Double-pole double-throw) switch module, designed for multimode broadband 3G/LTE cellular applications, supporting from 700MHz to
ASSOCIATED PRODUCTS AND RESOURCES
TE Connectivity Antenna Benefits High performance and innovative products High reliability: high performance and isolation High efficiency: optimized throughput, minimal losses In-house testing and validation
ULL0402FC05C. Description. Mechanical characteristics PIN CONFIGURATION. SMART Phones Portable Electronics SMART Cards
LOW CAPACITANCE unbumped flip chip tvs array Description The ULLC0402FC05C Flip Chip employs advanced silicon P/N junction technology for unmatched board-level transient voltage protection against Electrostatic
Control Devices Surface Mount Input-Limiting Diode Element
GC4212-6LP Datasheet Control Devices Surface Mount Input-Limiting Diode Element Released December 2017 Contents 1 Revision History... 1 1.1 Revision 1.0... 1 2 Product Overview... 2 2.1 Applications...
RClamp5011ZA. Ultra Small RClamp 1-Line, 5V ESD Protection. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics
- RailClamp Description RClamp TVS diodes are designed to protect sensitive electronics from damage or latch-up due to ESD. They are designed to replace 21 size multilayer varistors (MLVs) in portable
TQQ MHz LTE Band 3 Uplink BAW Filter
Applications LTE Band 3 Uplink Infrastructure Base Station General Purpose Wireless 6 Pin 3x3 mm leadless SMT Package Product Features Functional Block Diagram 75 MHz Bandwidth High Attenuation Low Loss
Datasheet DFBM-NQ62X-DT0R. A Bluetooth Low Energy System On Chip Module. Proprietary Information and Specifications are Subject to Change
1 Datasheet DFBM-NQ62X-DT0R A Bluetooth Low Energy System On Chip Module. Preliminary Data Sheet Sheet 1 of 18 Aug. 16, 2016 Contents 1. Features... 3 1-1. General... 3 1-2. Bluetooth... 3 2. Model No.
ELECTRICAL SPECIFICATIONS**
ico Xinger 1dB Directional Coupler Description The 161 ico Xinger is a low profile, miniature 1dB directional coupler in an easy to use surface mount package designed for MMDS and WLAN applications. The
AMOTECH Antenna division ANTENNA
AMOTECH Antenna division ANTENNA ANTENNA LINE-UP 1,559~1,609MHz GPS / GLONASS / BEIDOU / GALILEO 2,450 MHz Bluetooth 10.579 MHz NFMI 13.56 MHz 850, 900 MHz 1,710~2,170 MHz GSM (GSM, DCS, PCS, UMTS) 2,450
Specification. Part No. : MA9908.A.001. Product Name : GuardianX 1M 8in1 1*Active GNSS 4*LTE MIMO. Features : Low-profile Housing with Wall Mount
Specification Part No. : MA9908.A.001 Product Name : Guardian 1M 8in1 1*Active GNSS 4*LTE MIMO 3*WiFi MIMO Features : Low-profile Housing with Wall Mount 4* LTE MIMO 698 to 960MHz/1710 to 2170MHz/ 2490
MHz MHz. dbi MHz MHz MHz MHz MHz MHz
Husky - Pro Series 11 in 1 Antenna MIMO LTE, MIMO Dual Band Wi-Fi, and GPS External IP67 Antenna Product Description Parsec s Husky Series PTA PRO11H 4LTE 6WIFI GPS is a low profile eleven-in-one double
TQM4M9073 Through Line
Applications General Purpose Wireless RF bypass paths Microwave Radio Test & Measurement Scientific Instruments 16-pin 3x3mm leadless SMT package Product Features Functional Block Diagram DC 6 GHz 50 ohm
TQQ0041T. Band 41 Tx/Rx Filter. Product Overview. Key Features. Functional Block Diagram. Applications. Ordering Information.
Product Overview The TQQ0041T is a high-performance Bulk Acoustic Wave (BAW) Tx / Rx filter designed to meet the strict LTE rejection requirements for use in B41. TQQ0041T is specifically designed to meet
QPQ MHz Band 41 BAW Filter Product Overview Key Features Functional Block Diagram Applications Pin Configuration Pin No.
1 MHz Product Overview The is an ultrahigh performance Bulk Acoustic Wave (BAW) filter that provides 1 MHz bandwidth for uplink / downlink applications in Band 41. With low passband insertion loss and
11N Wall Mount Access Point / WDS AP / Universal Repeater. Features. Fully compatible with IEEE b/g/n devices
EAP9550-KZ is a powerful and multi-functioned 11n Indoor Access Point and it can act three modes AP/WDS/Universal Repeater. Smoke detector appearance will minimize visibility. So this model can work properly
SPECIFICATION. Patent Pending
SPECIFICATION Patent Pending Part No. : FUB71.A.07.C.001 Product Name : Embedded Flexible 4G LTE MIMO 2*2 Antenna with 150mm 1.37 IPE MHFI (U.FL) 698 MHz to 3GHz Features : Worldwide LTE Functionality
RClamp3328P. Low Capacitance RClamp. 8-Line Protection PRELIMINARY
PROTECTION PRODUCTS - RailClamp Description The RClamp provides low voltage ESD protection for high-speed ports. It features a high maximum ESD withstand voltage of ±25kV contact and ±3kV air discharge
SPECIFICATION. Part No. : MA741.A.BI.001. Product Name : Pantheon Antenna 2in1 MA.741 Screw-Mount (Permanent Mount) LTE Cellular 4G/3G/2G 2*2 MIMO
SPECIFICATION Part No. : MA741.A.BI.001 Product Name : Pantheon Antenna 2in1 MA.741 Screw-Mount (Permanent Mount) LTE Cellular 4G/3G/2G 2*2 MIMO Feature : 2 x LTE Cellular (4G/3G/2G) Antennas (MIMO) Works
SPECIFICATION PATENT PENDING. Embedded Flexible 4G LTE Wide Band Antenna MHz, MHz. Covers worldwide 2G/3G/4G Bands
SPECIFICATION PATENT PENDING Part No: Product Name: FXUB65.07.0180C Minima Embedded Flexible 4G LTE Wide Band Antenna 700-960MHz, 1700-2700MHz Features: Flexible Wideband Antenna Covers worldwide 2G/3G/4G
SECTION 1 IMP / UMP R107
1 SECTION 1 / UMP R107 Contents Introduction... 1-4 to 1-6 Characteristics...1-7 Board to board connectors...1-8 Receptacle packaging...1-9 Assembly instructions... 1-9 to 1-10 UMP Characteristics...1-11
RClamp3346P. Low Capacitance RClamp 6-Line ESD Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
Low Capacitance RClamp 6-Line ESD Protection PROTECTION PRODUCTS Description The RClamp provides ESD protection for highspeed data interfaces. It features a high maximum ESD withstand voltage of ±17kV
SKY LF: 0.7 to 6.0 GHz High-Isolation (Single-Bit-Control) SPDT Switch
DATA SHEET SKY13522-6LF: 0.7 to 6.0 GHz High-Isolation (Single-Bit-Control) SPDT Switch Applications GSM/DCS/PCS/CDMA/WCDMA/TD-SCDMA single-ended filter switching Features Broadband frequency range: 0.7
RClamp7524T. Low Capacitance RClamp 4-Line ESD Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
Low Capacitance RClamp 4-Line ESD Protection PROTECTION PRODUCTS Description RailClamp TVS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series
MPS4101-6LP Datasheet 50 MHz 25 GHz RoHS-Compliant Control Device QFN SPST PIN
MPS4101-6LP Datasheet 50 MHz 25 GHz RoHS-Compliant Control Device QFN SPST PIN Microsemi Corporate Headquarters One Enterprise, Aliso Viejo, CA 92656 USA Within the USA: +1 (800) 713-4113 Outside the USA:
Model XDL S Rev A
Delay Line DESCRIPTION The XDL15-3-030S can be used in amplifier linearization applications from 135 2700Mhz. Small form factor of XDL15-3-030S is ideal for cascading to obtain longer delay. The Xinger
RClamp7528T. Ultra Low Capacitance TVS Array. PRELIMINARY Features. PROTECTION PRODUCTS - RailClamp Description. Mechanical Characteristics
- RailClamp Description RailClamp TVS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive
Miniature 2.4 GHz Vertical-Mount PCBA Antenna
Miniature 2.4 GHz Vertical-Mount PCBA Antenna Product Description Parsec s PTA2.4-V is a miniature 2.4 GHz antenna for Bluetooth, ZigBee, and Wi-Fi with 6.4 x 15.05 x 0.15 mm ( H x W x thickness) dimensions.
SPECIFICATION. Description : Shockwave 698~960/ /1710~2700MHz Permanent Mount External Antenna N Type(M) connector
SPECIFICATION Part No. : TLS.01.1F11 Description : Shockwave 698~960/1575.42/1710~2700MHz Permanent Mount External Antenna N Type(M) connector Features : Applicable for 2G/3G/4G cellular bands and GPS
for Bluetooth/Wimax Application
ANTENNA PRODUCTS Sept., 2008 V8 Tommy Chen Page 1 sheet 190-1 A4 for Bluetooth/Wimax Application Quick Reference Data Centre Frequency Bandwidth VSWR Polarization Azimuth Beamwidth Peak Gain Impedance
6 Channel EMI Filter Array with ESD Protection
6 Channel EMI Filter Array with ESD Protection Features Six channels of EMI filtering for data ports Pi-style EMI filters in a capacitor-resistor-capacitor (C-R-C) network Greater than 32dB attenuation
LTCC Hybrid Coupler
1 / 11 1. Description 1-1. Part number: 1-. Features - Hybrid Coupler 3dB, 90 - Surface mount type - Suitable for operation frequency 1150 ~ 1650MHz - RoHS compliance - High stability in temperature and
2 Channel Headset EMI Filter with ESD Protection
2 Channel Headset EMI Filter with ESD Protection Features Two channels of EMI filtering, one for a microphone and one for an earpiece speaker Pi-style EMI filters in a capacitor-resistor-capacitor (C-R-C)
LM823 WiFi b/g/n Module with IPEX Receptical Host Controller Interface (HCI) via USB Interface
WiFi 802.11 b/g/n Module with IPEX Receptical Revised 13/MAR/2018 Datasheet Version XP OSX Vista 7 8 10 IoT CE 6 1.1 CE 7 Also available with Onboard Antenna. (LM822) Features WiFi 802.11 b/g/n RoHS, REACH
GC4701-6LP Datasheet RoHS-Compliant Control Devices DC 15 GHz Surface Mount Limiter PIN Diode
GC4701-6LP Datasheet RoHS-Compliant Control Devices DC 15 GHz Surface Mount Limiter PIN Diode Microsemi Corporate Headquarters One Enterprise, Aliso Viejo, CA 92656 USA Within the USA: +1 (800) 713-4113
SKYA21003: 0.1 to 6.0 GHz SPDT Switch
DATA SHEET SKYA213:.1 to 6. GHz SPDT Switch Automotive Applications Infotainment Telematics Remote keyless entry Automated toll systems Automotive smart home control systems In-cabin wireless systems GPS/Navigation
SKYA21001: 20 MHz to 3.0 GHz SPDT Switch
DATA SHEET SKYA21001: 20 MHz to 3.0 GHz SPDT Switch Automotive Applications Infotainment Automated toll systems Garage door opener 802.11 b/g/n WLAN, Bluetooth systems Wireless control systems Outdoor
Application Suggestions for X2Y Technology
Application Suggestions for X2Y Technology The following slides show applications that would benefit from balanced, low inductance X2Y devices. X2Y devices can offer a significant performance improvement
Common Mode Noise Filter. LCFE Series. Description. Features. Applications. 1210mm Size. Source Meter. LCR Meter (3GHz) Source Meter.
Description This specification covers the engineering requirements for both Common Mode Noise Filter (CMF) and ESD Protection, especially high speed differential serial interfaces, such as USB 3., USB
R R : R packaged in reel of 2000 couplers SMT HYBRID COUPLER GHZ Series : Coupler TECHNICAL DATA SHEET 1 / 5
TECHNICAL DATA SHEET 1 / 5 R41.211.502 R41.211.502 : R41.211.500 packaged in reel of 2000 couplers All dimensions are in mm. TECHNICAL DATA SHEET 2 / 5 R41.211.502 ELECTRICAL CHARACTERISTICS Specified
Features. Case Material: Molded Plastic, Green Molding Compound. Computers and Peripheral
LOW CAPACITANCE BIDIRECTIONAL TVS DIODE Product Summary V BR (Min) I PP (Max) C T (Typ) 15V 9A 2pF Description This new generation TVS is designed to protect sensitive electronics from the damage due to
AQ1003 Series - 30pF 30kV Unidirectional Discrete TVS
General Purpose ESD Protection - SP003 AQ003 Series AQ003 Series - 30pF 30kV Unidirectional Discrete TVS RoHS Pb GREEN Description This diode is fabricated in a proprietary silicon avalanche technology
SPECIFICATION. IS MHz Hercules ISM Band Antenna. Product Name : 915 MHz Hercules ISM Band Antenna Screw-mount (Permanent mount)
SPECIFICATION IS.05 915MHz Hercules ISM Band Antenna Part No. : IS.05.B.301111 Product Name : 915 MHz Hercules ISM Band Antenna Screw-mount (Permanent mount) Features : Low profile-height 29mm and diameter
Products Mobile Devices. Mobile Devices
Products Mobile Devices Amphenol provides a broad range of components with content on the majority of the world s mobile devices produced each year. Amphenol designs and manufactures a full range of electro-mechanical
SPECIFICATION. IS MHz Hercules ISM Band Antenna. Product Name : 868MHz Hercules ISM Band Antenna Screw-mount (Permanent mount)
SPECIFICATION IS.04 868MHz Hercules ISM Band Antenna Part No. : IS.04.B.301111 Product Name : 868MHz Hercules ISM Band Antenna Screw-mount (Permanent mount) Features : Low profile-height 29mm and diameter
Typical Performance 1. 2 OIP3 _ measured with two tones at an output of 0 dbm per tone separated by 1 MHz. RFout
Device Features 3 ~ 3.3V supply No Dropping Resistor Required No matching circuit needed Lead-free/Green/RoHS compliant SOT-343 package Product Description BeRex s BGS6 is a high SiGe HBT MMIC amplifier,
SKY LF: 0.7 to 3.0 GHz High Isolation SP4T Switch
DATA SHEET SKY13524-639LF: 0.7 to 3.0 GHz High Isolation SP4T Switch Applications CDMA/WCDMA/TD-SCDMA/LTE single-ended filter switching Features Broadband frequency range: 0.7 to 3.0 GHz High isolation:
SKY LF: 2.4 to 2.5 GHz SP3T Switch
DATA SHEET SKY13586-678LF: 2.4 to 2.5 GHz SP3T Switch Applications 802.11 a/b/g/n/ac WLAN networks Bluetooth systems Smartphones Connectivity modules RF1 RF2 RFC Features Positive low voltage control:
Omnidirectional Microphone with Bottom Port and Analog Output ADMP401
FEATURES 4.72 mm 3.76 mm 1.0 mm surface-mount package High SNR of 62 dba Sensitivity of 42 dbv Flat frequency response from 100 Hz to 15 khz Low current consumption of
Your antenna solutions partner!
www.roswin.com Your antenna solutions partner! Ceramic Chip Antenna Bluetooth / GPS / WLAN / Wi-Fi ROSWIN s Part Number : RCA3015B1A, RCA3015G1A, RCA3015BM1A RCA5220BM1A, RCA2012B1A Features Surface Mounted
Skywire GPRS Embedded Cellular Modem Datasheet
Skywire GPRS Embedded Cellular Modem Datasheet NimbeLink Corp Updated: October 2017 PN 30007 rev 6 NimbeLink Corp. 2017. All rights reserved. 1 Table of Contents Table of Contents 2 Introduction 3 Orderable
SPECIFICATION. IS MHz Hercules ISM Band Antenna. Product Name : 915MHz Hercules ISM Band Antenna Screw-mount (Permanent mount)
SPECIFICATION IS.05 915MHz Hercules ISM Band Antenna Part No. : IS.05.B.301111 Product Name : 915MHz Hercules ISM Band Antenna Screw-mount (Permanent mount) Features : Low Profile Height: 29mm, Diameter:
G IP3=38. P1dB= Single. Units
Product Description SG0 SG0 is a high performance InGaP HBT amplifier utilizing a Darlington configuration with an active bias network. The active bias network provides stable current over temperature
LM821 WiFi b/g/n Module with IPEX Receptical Host Controller Interface (HCI) via USB Interface
WiFi 802.11 b/g/n Module with IPEX Receptical Revised 30/NOV/2018 Datasheet Version OSX XP Vista 7 8 10 CE 6 1.3 CE 7 Also available with Onboard Antenna. (LM820) Features WiFi 802.11 b/g/n RoHS, REACH
ZETA Series 2G/3G/4G Modems with GPS Option
Key Features 2G/3G/4G versions AT command driven Industrial grade RoHS compliant Extended temperature range Extended RF sensitivity Embedded TCP / IP stack 5-42V DC supply 5 x GPIO 1 x ADC Additional Features
Skywire 2G 1xRTT Embedded Cellular Modem Datasheet
Skywire 2G 1xRTT Embedded Cellular Modem Datasheet NimbeLink Corp Updated: October 2017 PN 30003 rev 8 NimbeLink Corp. 2017. All rights reserved. 1 Table of Contents Table of Contents 2 Introduction 3
SKY LF: 20 MHz to 6.0 GHz GaAs SPDT Switch
DATA SHEET SKY13587-378LF: 2 MHz to 6. GHz GaAs SPDT Switch Applications WLAN 82.11 a/b/g/n networks Low power transmit/receive systems INPUT Industrial IoT Lighting OUTPUT1 OUTPUT2 Smart energy Connected
MHz SAW Filter
Applications For ISM applications Bluetooth Product Features Functional Block Diagram Top view Usable bandwidth 83.5 MHz High Attenuation Singleended operation Ceramic Surface Mount Package (SMP) No Impedance
SKY LF: 2.4 to 2.5 GHz SP3T Switch
DATA SHEET SKY13586-678LF: 2.4 to 2.5 GHz SP3T Switch Applications 802.11 a/b/g/n/ac WLAN networks Bluetooth systems Smartphones Connectivity modules RF1 RF2 RFC Features Positive low voltage control:
Radiocrafts Embedded Wireless Solutions
Gateway Radio Module for RIIoT ADVAE INFORMATION This document contains information on a new product. Specifications and information herein are subject to change without notice. Product Description The
CENTIGRID SURFACE MOUNT COMMERCIAL RELAYS DPDT
Series S172 DPDT Non-Latching Commercial Electromechanical Relay CENTIGRID SURFACE MOUNT COMMERCIAL RELAYS DPDT SERIES S172 S172D RELAY TYPE DPDT basic relay DPDT relay with internal diode for coil transient
SKY LF: 0.1 to 6.0 GHz SP3T Switch
DATA SHEET SKY13588-460LF: 0.1 to 6.0 GHz SP3T Switch Applications WCDMA band and mode switching Antenna switch for multimode systems J3 802.11a/b/g/n WLANs Industrial IoT Lighting Smart energy Connected
SPECIFICATION. Product Name : Gemini 2*LTE 4G MIMO Magnetic Antenna
SPECIFICATION Part No. : LMA101.A.BI.001 Product Name : Gemini 2*LTE 4G MIMO Magnetic Antenna Features : Best solution for 2*LTE MIMO Worldwide applications Covers Fallback 3G/2G Frequencies (HSPA/UMTS/WCDMA/GSM/GPRS)
RClamp3324T PRELIMINARY. PROTECTION PRODUCTS Absolute Maximum Rating. Electrical Characteristics (T=25 o C Unless Otherwise Specified) I PP V R
- RailClamp Description The RClamp 3324T provides ESD protection for USB3., HDMI.3/.4, and other high-speed ports. It features a high maximum ESD withstand voltage of ±25kV contact and ±3kV air discharge
CBL Starter Cable Kit for DuraNAV System
Technical Datasheet Td0008 CBL-1010-00 Starter Cable Kit for DuraNAV System Overview The CBL-1010-00 Cable Kit is designed to allow users of the DuraNAV to rapidly start developing and testing software,
GBLC03 - GBLC24C. Ethernet 10/100/1000 Base T SMART Phones Handheld - Wireless Systems USB Interface
ultra LOW CAPACITANCE TVS ARRAY Description The GBLCxx and GBLCxxC Series are ultra low capacitance transient voltage suppressor arrays, designed to protect applications such as portable electronics and
SKYA21013: 0.1 to 6.0 GHz SPDT Switch
DATA SHEET SKYA21013: 0.1 to 6.0 GHz SPDT Switch Automotive Applications Infotainment RF1 Automated toll systems Garage door opener RF3 RF2 802.11 b/g/n WLAN, Bluetooth systems Wireless control systems
Obsolete. Product Specification PE4210. Product Description. SPDT UltraCMOS RF Switch 10 MHz - 3 GHz Features Single 3-volt power supply
Product Description The PE421 UltraCMOS RF Switch is designed to cover a broad range of applications from 1 MHz to 3 GHz. This singlesupply switch integrates on-board CMOS control logic driven by a simple,
Specification For LTCC 4-Phased Antenna Feeder (Quadrifilar)
Specification For LTCC 4-Phased Antenna Feeder (Quadrifilar) Model Name : Customer : Title: Name : APPROVED By Date : Signature : RN Technologies co., Ltd. Issued Date : Designed : Approved : / 11 1. Description
SMD Power Inductors CATALOGUE.
SMD Power Inductors CATALOGUE www.lairdtech.com 1 ABOUT LAIRD TECHNOLOGIES Laird Technologies designs and manufactures customized, performancecritical products for wireless and other advanced electronics
LM820 WiFi b/g/n Module with IC Antenna Host Controller Interface (HCI) via USB Interface
WiFi 802.11 b/g/n Module with IC Antenna Revised 11/JAN/2018 Datasheet Version OSX XP Vista 7 8 10 CE 6 CE 7 Also available with IPEX Receptical (LM821) Features WiFi 802.11 b/g/n Operates in 2.4 GHz Frequency
BROADBAND HIGH REPEATABILITY TO-5 RELAY SPDT DC 8 GHz
BROADBAND HIGH REPEATABILITY TO-5 RELAY SPDT DC 8 GHz SERIES RF311 RF331 SERIES DESIGNATION RF311 RF331 RELAY TYPE SPDT RF TO-5 relay Sensitive, SPDT RF TO-5 relay INTERNAL CONSTRUCTION UNI-FRAME ARMATURE
SFC ChipClamp ΤΜ Flip Chip TVS Diode with T-Filter PRELIMINARY Features
Description The SFC2282-50 is a low pass T-filter with integrated TVS diodes. It is designed to provide bidirectional filtering of EMI/RFI signals and electrostatic discharge (ESD) protection in portable
Obsolete Parameter Conditions Minimum Typical Maximum Units
Product Description The PE4242 UltraCMOS RF Switch is designed to cover a broad range of applications from 1 MHz through 3 GHz. This reflective switch integrates on-board CMOS control logic with a low
SP pF SOT23-6L 4 Channels Diode Array
SP319.3pF SOT23-6L 4 Channels Diode Array RoHS Pb GREEN Description 4 5 6 3 2 1 SP312-3UTG Pinout *Pins 6, 7, 9, 1 are not internally connected but should be connected to the trace. 6 7 8 9 1 5 4 3 2 1
Preliminary Product Overview
Preliminary Product Overview Features 1.0 A per channel / 3.0 A Total Current Maximum Voltage (AC or DC): +150 V Low On-State Resistance < 1.0 Ω 10 GΩ Input to Output Isolation < 10us Switching Time High
2.6 GHz capable, 10 W carrying power (at 2.6 GHz), 50Ω/75Ω impedance and 1 Form C relays
.6 GHz capable, W carrying power (at.6 GHz), 5Ω/75Ω impedance and Form C relays RE RELAYS (ARE)..44..44 mm inch FEATURES Excellent high frequency characteristics (to.6ghz) Surface-mount type also available
CANdoISO Module Datasheet
Datasheet NET50006/1 CANdoISO Module Datasheet 1 Overview The CANdoISO Module is an isolated USB to CAN bus interface in a format suitable for SMT or through hole PCB mounting. The module is based on the
Board Mount Connector Footprint Design Process
Board Mount Connector Footprint Design Process STEP 1: Connector Selection Series Force to Engage (Max) Max SB LD FD Freq. SMP 2.0 lbs 10 lbs 15 lbs 40 GHz SMPM 3.5 lbs N/A 8.0 lbs 65 GHz SMPS 3.0 lbs
SRV05-4. ultra low capacitance steering diode/tvs array. Description. sot-23-6 package. applications
ultra low capacitance steering diode/tvs array Description The is a dual USB port protection array that features ultra low capacitance. This device can be used in applications such as video cards, SMART
SKY LF: 0.1 to 6.0 GHz SP3T Switch
DATA SHEET SKY13373-46LF:.1 to 6. GHz SP3T Switch Applications WCDMA band and mode switching Antenna switch for multimode systems 82.11a/b/g/n WLANs J3 Features Broadband frequency range:.1 to 6. GHz Low