"High Frequency Ceramic Solutions"
|
|
|
- Dulcie Marshall
- 6 years ago
- Views:
Transcription
1 Designed for: BAN, Bluetooth, , WLAN, igbee, Propietary Protocol, ISM, Smart Energy, WiMax Page 1 of 9 General Specifications Part Number Operating Frequency (MHz) Impedance Operating Temperature Return Loss ( GHz) Peak 2.38GHz Average 2.38GHz Peak 2.45GHz Average 2.45GHz Peak 2.60GHz Average 2.60GHz 2500AT44M Ω -40 to +85 C 9.5 db min. 2.0 dbi typ. (-V) 0.0 dbi typ. (-V) 2.5 dbi typ. (-V) 0.5 dbi typ. (-V) 2.0 dbi typ. (-V) 0.0 dbi typ. (-V) Quantity per Reel 1,000 Recommneded Storage Conditions +5 ~ +35 C, Humidity 45~75%RH Mechanical Specifications Terminal Configuration In mm No. Function L ± ± 0.20 W 1 Feeding Point W ± ± 0.20 L a1 2 NC T ± ± 0.20 a ± ± 0.20 T 2 1 a ± ± 0.20 a2 Mounting Considerations - Layout #1 Mount these devices with brown mark facing up. Units: mm *Line width should be designed to provide 50 Ω impedance matching characteristics. 50Ω Feed line GND 1 pf 2.7n GND 1 Metal Clearance area 1 7 No Ground 1 1. It is recommended that the designer leave available slots for a "pi" (or shunt-series-shunt) network. The antenna matching network values are used when antenna is monted on Johanson's evaluation board. The matching values on clinet's PCB will be different. Go to: and see how to obtain the new values. If you need further help, contact our RF Applications Eng Team at: /en/ask-a-technical-question.html 4001 Calle Tecate Camarillo, CA TEL FA
2 Designed for: BAN, Bluetooth, , WLAN, igbee, Propietary Protocol, ISM, Smart Energy, WiMax Page 2 of 9 Layout #1 example (units in mm) Matching circuits Antenna 20 Ground 50Ω Feed line (can be shortened as No Ground Orderable EVB p/n: 2500AT44M0400-EB1SMA Return Loss - with Matching Circuits 4001 Calle Tecate Camarillo, CA TEL FA
3 Designed for: BAN, Bluetooth, , WLAN, igbee, Propietary Protocol, ISM, Smart Energy, WiMax Page 3 of 9 Typical Radiation 2.38GHz - Layout #1 Typical Radiation Patterns - Layout #1 -V/-H 27 -cut scanning direction -V/-H 27 -cut scanning direction -V/-H 27 -cut scanning direction 4001 Calle Tecate Camarillo, CA TEL FA
4 Designed for: BAN, Bluetooth, , WLAN, igbee, Propietary Protocol, ISM, Smart Energy, WiMax Page 4 of 9 Typical Radiation 2.45GHz - Layout #1 Typical Radiation Patterns - Layout #1 -V/-H 27 -cut scanning direction -V/-H 27 -cut scanning direction -V/-H 27 -cut scanning direction 4001 Calle Tecate Camarillo, CA TEL FA
5 Designed for: BAN, Bluetooth, , WLAN, igbee, Propietary Protocol, ISM, Smart Energy, WiMax Page 5 of 9 Typical Radiation 2.6GHz - Layout #1 Typical Radiation Patterns - Layout #1 -V/-H 27 -cut scanning direction -V/-H 27 -cut scanning direction -V/-H 27 -cut scanning direction 4001 Calle Tecate Camarillo, CA TEL FA
6 2.38GHz / 2.45GHz / 2.6GHz Wideband SMD Chip Antenna P/N 2500AT44M0400 Designed for: BAN, Bluetooth, , WLAN, igbee, Propietary Protocol, ISM, Smart Energy, WiMax Page 6 of 9 Alternate layout - Layout #2 Mount these devices with brown mark facing up. Units: mm *Line width should be designed to provide 50 Ω impedance matching characteristics. Layout #2 example (units in mm)** It is recommended that the designer leave available slots for a "pi" (or shunt-seriesshunt) network. The antenna matching network values are used when antenna is monted on Johanson's evaluation board. The matching values on clinet's PCB will be different. Go to: and see how to obtain the new values. If you need further help, contact our RF Applications Eng Team at: /en/ask-a-technical-question.html **Bandwidth is about 190MHz in this configuration 4001 Calle Tecate Camarillo, CA TEL FA
7 Designed for: BAN, Bluetooth, , WLAN, igbee, Propietary Protocol, ISM, Smart Energy, WiMax Page 7 of 9 Typical Electrical Characteristics (T=25 C) Test Board - Layout #2 (units in mm) Return Loss - with Matching Circuits 4001 Calle Tecate Camarillo, CA TEL FA
8 Designed for: BAN, Bluetooth, , WLAN, igbee, Propietary Protocol, ISM, Smart Energy, WiMax Page 8 of 9 Typical Radiation 2.45GHz - Layout #2 Typical Radiation Patterns - Layout #2 -V/-H 27 -cut scanning direction -V/-H 27 -cut scanning direction -V/-H 27 -cut scanning direction 4001 Calle Tecate Camarillo, CA TEL FA
9 Designed for: BAN, Bluetooth, , WLAN, igbee, Propietary Protocol, ISM, Smart Energy, WiMax Page 9 of 9 Additional Info Part Number Explanation P/N Suffix Packing Style Bulk Suffix = S eg. 2500AT44M0400S T & R Suffix = T eg. 2500AT44M0400E Evaluation Board SMA Suffix = -EB1SMA eg. 2500AT44M0400-EB1SMA Tape& Reel Specifications Soldering Profile Calle Tecate Camarillo, CA TEL FA
"High Frequency Ceramic Solutions"
Page 1 of 5 This filter is associated with Intel Reference Desing Platform: IRE220 General Specifications Part Number 5697CR45A0360 Operating Passband Freq. 5490-5850 MHz Top View Insertion loss (5490-5670MHz)
ACA-5036-A2-CC-S Specification
1. APPLICATION: WLAN, 802.11b/g, Bluetooth, etc ACA-5036-A2-CC-S Specification 2. Explanation of part number : AC A _ 5036 _ A2 _ CC _ S (1) (2) (3) (4) (5) (6) (7) (1) Product Type:Chip Antenna (2) Center
Part No Stamped Metal Wi-Fi / BT Embedded Antenna
Part No. 1002298 Wi-Fi / BT Dual Band Stamped Metal Embedded Antenna 2.4 / 5 GHz Supports: Wi-Fi applications, Agriculture, Automotive, Bluetooth, igbee, WLAN, Smart Home, Healthcare, Digital Signage DATASHEET
Electrical Specifications Typical Characteristics, on 50 x 70 mm PCB. Mechanical Specifications & Ordering Part Number
DATASHEET Part No. 1001013 Product: 2.4 GHz FR4 Part No. 1001013 Wi-Fi / BT SMD On Ground / Off Ground 2400-2485 MHz Supports: Wi-Fi applications, Agriculture, Automotive, Bluetooth, Zigbee, WLAN, Smart
Echo 12. Specification Document 2. MEASUREMENT Appearance and Dimensions 2. MEASUREMENT. L(Length) W(Width) 5.5. H(Height) 4.
1. SPECIFICATIONS 1.1. Electrical Specifications ITEM GSM850 GSM 900 DCS PCS UMTS Frequency [MHz] 824~894 880~960 1710~1880 1850~1990 1920~2170 Peak Gain [dbi] 0.67 1.56 5.25 5.00 5.52 Eff.[%] @Min 53%
Mechanical Specifications & Ordering Part Number
DATASHEET Part No. 1000146 Product: Wi-Fi / BT / WLAN / Zigbee Embedded Stamped Metal Part No. 1000146 WLAN / BT / Zigbee Embedded Stamped Metal 2.4 / 4.9 / 5.2 / 5.8 GHz (802.11 a/b/g/n/c + Japan) Supports:
2.4 GHz ISM Band Working Frequency
MULTILER CERMIC NTENN RoHS Compliance 2.4 GHz ISM Band Working Frequency P/N: RFNT95201200T *Contents in this sheet are subject to change without prior notice. Page 1 of 8 SC_RFNT95201200T_V02 pr. 2010
Electrical Specifications Typical Characteristics, on 72 x 50 mm PCB. Center Frequency fₒ (GHz) Feed Point Impedance
Part No. 1001011 GPS/GLONASS/Beidou/Galileo FR4 (On/Off Ground) 1.561, 1.575, 1.603 GHz Supports: Tracking, Smart Home, Agriculture, Automotive, Healthcare, Digital Signage, Wearables, Industrial Devices
TransferJet RF Coupler Part No. SR4T014 lamiiant Product Specification
TransferJet RF Coupler lamiiant Product Specification 1. Features Coupler for TransferJet applications Short range coupling device for secure data transfer Point to point connectivity SMD mounting Small
Impedance (Ω) at DC Resistance
Type BMB-A Series Key Features Effective EMI Protection Wide Frequency Characteristics High soldering Heat Resistance Various Package Sizes Available Suited to a Variety of Applications Terminal finish
for Bluetooth/Wimax Application
ANTENNA PRODUCTS Sept., 2008 V8 Tommy Chen Page 1 sheet 190-1 A4 for Bluetooth/Wimax Application Quick Reference Data Centre Frequency Bandwidth VSWR Polarization Azimuth Beamwidth Peak Gain Impedance
Your antenna solutions partner!
www.roswin.com Your antenna solutions partner! Ceramic Chip Antenna Bluetooth / GPS / WLAN / Wi-Fi ROSWIN s Part Number : RCA3015B1A, RCA3015G1A, RCA3015BM1A RCA5220BM1A, RCA2012B1A Features Surface Mounted
AMOTECH Antenna division ANTENNA
AMOTECH Antenna division ANTENNA ANTENNA LINE-UP 1,559~1,609MHz GPS / GLONASS / BEIDOU / GALILEO 2,450 MHz Bluetooth 10.579 MHz NFMI 13.56 MHz 850, 900 MHz 1,710~2,170 MHz GSM (GSM, DCS, PCS, UMTS) 2,450
BLUE bean. Data sheet
Data sheet is a high performance and ultra low power surface mount USB radio combining single-stream 11ac Wave2 Wi-Fi and Bluetooth 5.0 in a very small form factor is IEEE 802.11b/g/n/a/ac Wave2 dual-band
Common Mode Noise Filter. LCFE Series. Description. Features. Applications. 1210mm Size. Source Meter. LCR Meter (3GHz) Source Meter.
Description This specification covers the engineering requirements for both Common Mode Noise Filter (CMF) and ESD Protection, especially high speed differential serial interfaces, such as USB 3., USB
Product Specification
Product Specification Product Name: M904S Bluetooth SiP Module -BT 4.0 LE Version: 1.04 Doc No: Date: Nov 25 th, 2016 MtM Technology Corporation 8F, 178 MinQuan East Road Section 3, Taipei, Taiwan (R.O.C.)
Miniature 2.4 GHz Vertical-Mount PCBA Antenna
Miniature 2.4 GHz Vertical-Mount PCBA Antenna Product Description Parsec s PTA2.4-V is a miniature 2.4 GHz antenna for Bluetooth, ZigBee, and Wi-Fi with 6.4 x 15.05 x 0.15 mm ( H x W x thickness) dimensions.
CDDFN P - Surface Mount TVS Diode Array
*RoHS COMPLIANT Features n RoHS compliant* n Low capacitance -.4 pf (I/O to I/O) n ESD protection to IEC 61-4-2 (Level 4) Applications n HDMI 1.3, 1.4 and 2. n DisplayPort n Digital Visual Interface (DVI)
APPLICATIONS Computers and peripheral equipment Consumer products High speed circuits Suitable for circuits with unstable ground PART NUMBERING SYSTEM
The ferrite beads have been developed to pass signal frequencies from 1MHz to 1MHz while exhibiting high impedance characteristics to reduce EMI noise above these specific frequencies. FEATURES Designed
Specification of Analog MEMS Microphone
Specification of Analog MEMS Microphone RoHS Compliance & Halogen Free Model: SA11BA383-Y21 Eng.No:SA1602007 Designed By: Ester 02.22 Checked By: Richard 02.22 Approved By: Nina 02.22 Customer: P/N of
Typical Applications Base Stations C MHz 700 MHz. Reference Frequency. Parameter Min Typ Max Units Condition
FX-401 Frequency Controlled Crystal Oscillator Features Reflow Process Compatible Surface Mount Package Low Phase Noise Build in PLL-Circuit Typical Applications Base Stations Previous Vectron Model Number
CDDFN P - Surface Mount TVS Diode Array
*RoHS COMPLIANT Features n RoHS compliant* n Low capacitance -. pf (I/O to I/O) n ESD protection to IEC -- (Level ) Applications n USB 3. n USB 3. CDDFN-5P - Surface Mount TVS Diode Array General Information
Gain Equalizers EQY-SERIES. Microwave. The Big Deal
Microwave Gain Equalizers 50Ω DC to 6 GHz EQY-SERIES The Big Deal Excellent Return Loss, 20dB typ. Wide bandwidth, DC - 6 GHz Small Size, 2 mm x 2 mm CASE STYLE: MC1631-1 Product Overview EQY series of
TVU1240R1A Engineering Specification
Part : TVU1240R1A Version : A6 Page : 1 / 10 SCOPE TVU1240R1A Engineering Specification This specification is applied to protect sensitive electronic circuits from the threat of electrostatic discharge
Specification of Analog MEMS Microphone
Specification of Analog MEMS Microphone RoHS Compliance & Halogen Free Waterproof MEMS Microphone Model: SA04BA383-V21 Eng.No:SA1602011 Designed By: A a r o n 0 7. 0 2 Checked By: E s t e r 0 7. 0 2 Approved
6 Channel EMI Filter Array with ESD Protection
6 Channel EMI Filter Array with ESD Protection Features Six channels of EMI filtering for data ports Pi-style EMI filters in a capacitor-resistor-capacitor (C-R-C) network Greater than 32dB attenuation
INPAQ Global RF/Component Solutions
EGA10201V00A3 Specification Product Name Series Part No ESD Guard TM EGA Series EGA10201V00A3 Size EIA 0201 EGA10201V00A3 Engineering Specification 1. Scope This specification is applied to electrostatic
INPAQ Global RF/Component Solutions
TVU1240R1A Specification Product Name Series Part No ESD Guard TM Array TVU Series TVU1240R1A Size EIA 1004 TVU1240R1A Product Engineering Specification 1. Scope This specification is applied to protect
RP-M110 Datasheet (VER.1.3)
() REVISION HISTORY Version Date Description VER.1.0 2009.05.6 First Version Release VER.1.1 2009.7.28 VER.1.2 2009.8.28 Section 1.6 - Terminal 1~4 BBA output deleted. Section 1.3/1.4/3.1/3.2 -Change temperature
April Common Mode Filters. With built-in ESD protection element type. TCE series. * Dimensions Code JIS[EIA]
![April Common Mode Filters. With built-in ESD protection element type. TCE series. * Dimensions Code JIS[EIA]](/thumbs/86/94868463.jpg "April Common Mode Filters. With built-in ESD protection element type. TCE series. * Dimensions Code JIS[EIA]")
E M C C o m p o n e n t s April 204 Common Mode Filters With built-in ESD protection element type TCE series TCE0806G TCE0806S TCE608G [0302 inch]* [0302 inch] [0603 inch] * Dimensions Code JIS[EIA] (2/4)
Omnidirectional Microphone with Bottom Port and Analog Output ADMP401
FEATURES 4.72 mm 3.76 mm 1.0 mm surface-mount package High SNR of 62 dba Sensitivity of 42 dbv Flat frequency response from 100 Hz to 15 khz Low current consumption of
Features. High RF Shielding. Easy Opening/Closing of lid. EMI filters on all Data and DC lines. Easily customizable to meet various test needs
TC-5915A Shield Box Features High RF Shielding Easy Opening/Closing of lid EMI s on all Data and DC lines Easily customizable to meet various test needs Shock absorber on lid Specifications Mechanical
Power Splitter/Combiner 2 Way-90 50Ω 5 to 11 GHz
MMIC Surface Mount Power Splitter/Combiner 2 Way-90 50Ω 5 to 11 GHz The Big Deal Wideband (5-11 GHz) Good Isolation and Return Loss Highly repeatable performance (GaAs based design) No external termination
EM8D-100L EMI FILTER/TVS ARRAY DESCRIPTION DFN-16 PACKAGE FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS CIRCUIT DIAGRAM & PIN CONFIGURATION
EMI FILTER/TVS ARRAY DESCRIPTION The is a DFN-16, 8 line low pass filter array with integrated TVS diodes. The is designed to suppress unwanted EMI/RFI signals and provide ESD protection for high-speed
TCE0806S Type. Common Mode Filters. Caution. TCE Series. With built-in ESD protection element type. June May 18, Mar.
E M C C o m p o n e n t s June 2017 Common Mode Filters With built-in ESD protection element type TCE Series TCE0806S [0302 inch]* * Dimensions Code JIS[EIA] Caution May 18, 2017 Mar. 29, 2019 Sep. 30,
Features wideband, 10 to 4200 MHz low insertion loss, 0.6 db typ. feed through terminal per DC port
Coaxial Bias-Tee 50Ω Wideband 10 to 4200 MHz Maximum Ratings Operating Temperature -55 C to 100 C Storage Temperature -55 C to 100 C RF Power Voltage at DC port Input Current DC resistance from DC to RF&DC
MPS4101-6LP Datasheet 50 MHz 25 GHz RoHS-Compliant Control Device QFN SPST PIN
MPS4101-6LP Datasheet 50 MHz 25 GHz RoHS-Compliant Control Device QFN SPST PIN Microsemi Corporate Headquarters One Enterprise, Aliso Viejo, CA 92656 USA Within the USA: +1 (800) 713-4113 Outside the USA:
Features. High RF Shielding. Easy Opening/Closing of lid. EMI filters on all Data and DC lines. Easily customizable to meet various test needs
TC-5915A Shield Box Features High RF Shielding Easy Opening/Closing of lid EMI filters on all Data and DC lines Easily customizable to meet various test needs Shock absorber on lid Specifications Mechanical
Product Code Type Operating Force Product Height and Push Plate Color. Travel Type Middle Push Travel Short Push Travel
4.7 mm 3.5 mm SMD Light Touch Switches Type: /EVQP9/EVQ3P2 Features External dimensions : 4.7 mm 3.5 mm, Height : Middle Push Travel 2.5 mm ShortPushTravel2.1mm,2.5mm High operating force and long operational
CDMSP M Surface Mount TVS Diode Array
*RoHS COMPLIANT Features RoHS compliant* Protects four I/O lines Ultra-low capacitance ~.55 pf ESD protection > kv Surge protection Applications High Definition Multimedia Interface (HDMI) Digital Visual
MHz BAW Filter
Applications S-Band For high-selectivity applications Product Features Usable bandwidth 30 MHz Low loss High selectivity Single-ended operation Ceramic chip-scale Package (CSP) Small Size Hermetic RoHS
CSR Bluetooth Modules MBC05-CAR-AT
CSR Bluetooth Modules MBC05-CAR-AT Specification Version 0.1 25-Aug-2009 Product No.: MBC05-CAR-AT Product Description: Bluetooth v2.1 EDR Class 2 BT Stereo Module Issue Date: 2009/08/25 Release Version:
CDDFN P - Surface Mount TVS Diode Array
Features n RoHS compliant* n Low capacitance -.4 pf (I/O to I/O) n ESD protection to IEC 61-4-2 (Level 4) Applications n HDMI 1.3, 1.4 and 2. n DisplayPort n Digital Visual Interface (DVI) n SATA and esata
2 Channel Headset EMI Filter with ESD Protection
2 Channel Headset EMI Filter with ESD Protection Features Two channels of EMI filtering, one for a microphone and one for an earpiece speaker Pi-style EMI filters in a capacitor-resistor-capacitor (C-R-C)
Enables prolonged battery life. Saves DC power consumption when it is not reguired.
Ultra Low Noise, Low Current, Shutdown Monolithic Amplifier 50Ω 10 to 13 GHz The Big Deal Ultra-low noise figure, 1.3 db Low Current, 13 ma at 3V and 29mA at 5V Excellent ESD protection, Class 1C Small
ESD Protective Device: IMSA A
ESD Protective Device: IMSA-683-1A Features - Ultra low capacitance - Extremely fast response time - Low Peak voltage - High withstanding - Bi-directional SMD package - Lead (Pb) free, RoHS compliant PACKAGE
RClamp7524T. Low Capacitance RClamp 4-Line ESD Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
Low Capacitance RClamp 4-Line ESD Protection PROTECTION PRODUCTS Description RailClamp TVS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series
INPAQ Global RF/Component Solutions
EGA10402V05B0 Specification Product Name Series Part No ESD Guard TM EGA Series EGA10402V05B0 Size EIA 0402 EGA10402V05B0 Engineering Specification 1. Scope This specification is applied to electrostatic
TVU1240R1A Product Engineering Specification
TVU1240R1A Product Engineering Specification 1. Scope This specification is applied to protect sensitive electronic circuits from the threat of electrostatic discharge (ESD). The function meets with the
SG B b/g/n Wireless USB Module
SG901-1059B 802.11 b/g/n Wireless USB Module Overview The SG901-1059B is a high speed module supporting all data rates of the latest standards including Wi-Fi 802.11B/G/N using a USB 2.0 interface. This
Typical Performance 1. 2 OIP3 _ measured with two tones at an output of 0 dbm per tone separated by 1 MHz. RFout
Device Features 3 ~ 3.3V supply No Dropping Resistor Required No matching circuit needed Lead-free/Green/RoHS compliant SOT-343 package Product Description BeRex s BGS6 is a high SiGe HBT MMIC amplifier,
SPECIFICATION : MA700.A.ABC.001. : Pantheon Antenna 3in1 MA.700 Screw-Mount (Permanent Mount) GPS / LTE Cellular / 2.4GHz / 5GHz Combination Antenna
SPECIFICATION Part No. : MA7.A.ABC.1 Product Name : Pantheon Antenna 3in1 MA.7 Screw-Mount (Permanent Mount) GPS / LTE Cellular / 2.4GHz / 5GHz Combination Antenna Features : Highest Efficiency/Peak Gain
INPAQ. Specification TEA10402V15A0. Product Name. ESD Guard TM TEA Series (Thin Film Air Gap) Size EIA Global RF/Component Solutions
TEA10402V15A0 Specification Product Name Series Part No ESD Guard TM TEA Series (Thin Film Air Gap) TEA10402V15A0 Size EIA 0402 TEA10402V15A0 Engineering Specification 1. Scope TEA series is designed to
ALPW-BLEM103 Datasheet 1.0 Bluetooth Low Energy HCI
ALPW-BLEM103 Datasheet 1.0 Bluetooth Low Energy HCI FEATURES Ready-to-use Bluetooth Low Energy HCI module Ultra Small form factor 12mm x 12mm Ultra Low Power consumption EM Microelectronic Bluetooth Low
RFSA2023TR7. Voltage Controlled Attenuator. Product Overview. Key Features. Functional Block Diagram Applications. Ordering Information
Product Overview Qorvo's is a fully monolithic analog voltage control attenuator (VCA) featuring exceptional linearity over 30dB adjustment range with on-chip temperature compensation. incorporates a revolutionary
MHz SAW Filter
Applications For ISM applications Bluetooth Product Features Functional Block Diagram Top view Usable bandwidth 83.5 MHz High Attenuation Singleended operation Ceramic Surface Mount Package (SMP) No Impedance
HK NATER TECH LIMITED
HK NATER TECH LIMITED NT-AR1021X-PA Specification Customer: Description: NT-USB-AR1021X-5.8G-PA Customer P/N: Date: Customer Approve Auditing Admit Provider Approve Auditing Admit Customer: Add: Tel: Fax:
Control Devices Surface Mount Input-Limiting Diode Element
GC4212-6LP Datasheet Control Devices Surface Mount Input-Limiting Diode Element Released December 2017 Contents 1 Revision History... 1 1.1 Revision 1.0... 1 2 Product Overview... 2 2.1 Applications...
PLATINUM SERIES R PART NUMBER SELECTION. High performance SPDT up to 40 GHz. Our Most Important Connection is with You. SMA - SMA 2.
PART NUMBER SELECTION Frequency Range: 3: SMA up to 6 GHz 4: SMA up to 20 GHz F: SMA up to 26.5 GHz 8: SMA 2.9 up to 40 GHz Type: 3: Latching (1) 4: Latching + I.C. (1) 5: Latching + S.C.O. (1) 6: Latching
SKY LF: 0.1 to 3.0 GHz GaAs SPDT Switch
DATA SHEET SKY13319-374LF:.1 to 3. GHz GaAs SPDT Switch Applications Two-way radios WiMAX WLANs J2 J1 Features Broadband frequency range:.1 to 3. GHz Low insertion loss:.4 @ 1 GHz High isolation: 25 @
Stadium Antennas.
2017 Stadium Antennas www.mars-antennas.com MA-CQ26-1X 380 MHz-6 Multi Band Omni Antenna MARS Multi Band Omni Antenna covers all the bands for 2G, 2.5G and 3G cellular, as well as ISM, WLAN, UNII, Bluetooth,
LCD and Camera EMI Filter Array with ESD Protection
LCD and Camera EMI Filter Array with ESD Protection Features Six and eight channels of EMI filtering with integrated ESD protection 0.4mm pitch, 15-bump, 2.360mm x 1.053mm footprint Chip Scale Package
SKY LF: GHz, 20 db Variable Voltage Attenuator
DATA SHEET SKY12146-321LF: 3.0 3.8 GHz, 20 Variable Voltage Attenuator Applications WLANs WiMAX systems Features Power control for 3.5 GHz fixed wireless applications Typical attenuation: 20 Control voltage:0
RClamp3328P. Low Capacitance RClamp. 8-Line Protection PRELIMINARY
PROTECTION PRODUCTS - RailClamp Description The RClamp provides low voltage ESD protection for high-speed ports. It features a high maximum ESD withstand voltage of ±25kV contact and ±3kV air discharge
EGA10201V05A0 Product Engineering Specification
RoHS Pb EGA10201V05A0 Product Engineering 1. Scope This specification is applied to electrostatic discharge (ESD) protection. It is designed to protect the high-speed data lines against ESD transients.
[Type here] M904S. Bluetooth 4.0 SiP Module - BT 4.0 LE
![[Type here] M904S. Bluetooth 4.0 SiP Module - BT 4.0 LE](/thumbs/78/78761520.jpg "[Type here] M904S. Bluetooth 4.0 SiP Module - BT 4.0 LE")
[Type here] M904S Bluetooth 4.0 SiP Module - BT 4.0 LE Preliminary DATASHEET 26 th March, 2018 Table of Contents 1 Product Brief... 1 2 Features and Applications... 2 3 Block Diagram... 3 4 Technical Specifications...
RClamp7528T. Ultra Low Capacitance TVS Array. PRELIMINARY Features. PROTECTION PRODUCTS - RailClamp Description. Mechanical Characteristics
- RailClamp Description RailClamp TVS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive
SPECIFICATION. Part No. : MA741.A.BI.001. Product Name : Pantheon Antenna 2in1 MA.741 Screw-Mount (Permanent Mount) LTE Cellular 4G/3G/2G 2*2 MIMO
SPECIFICATION Part No. : MA741.A.BI.001 Product Name : Pantheon Antenna 2in1 MA.741 Screw-Mount (Permanent Mount) LTE Cellular 4G/3G/2G 2*2 MIMO Feature : 2 x LTE Cellular (4G/3G/2G) Antennas (MIMO) Works
Product Engineering Specification TVH SP0
Part : TVH020101SP0 Version : A1 Page : 1 / 9 SCOPE Product Engineering Specification TVH 0201 01 SP0 TVH 0201 01 SP0 is a TVS diode designed to protect one power/control line or one signal line from overvoltage
RClamp3346P. Low Capacitance RClamp 6-Line ESD Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
Low Capacitance RClamp 6-Line ESD Protection PROTECTION PRODUCTS Description The RClamp provides ESD protection for highspeed data interfaces. It features a high maximum ESD withstand voltage of ±17kV
Hybrid Couplers 3dB, 90º Type PC2025A2100AT00
GENERAL DESCRIPTION The PC2025A2100AT00 is a RoHS compliant low profile wideband 3dB hybrid coupler which can support mobile applications, including PCS and DCS applications. The power coupler series of
SKY LF: 0.01 to 6.0 GHz GaAs SPDT Switch
DATA SHEET SKY1335-385LF:.1 to 6. GHz GaAs SPDT Switch Applications WLAN 82.11 a/b/g networks INPUT WLAN repeaters ISM band radios OUTPUT1 OUTPUT2 Low power transmit receive systems Features Positive voltage
SFC ChipClamp ΤΜ Flip Chip TVS Diode with T-Filter PRELIMINARY Features
Description The SFC2282-50 is a low pass T-filter with integrated TVS diodes. It is designed to provide bidirectional filtering of EMI/RFI signals and electrostatic discharge (ESD) protection in portable
Mobile Antennas.
2017 Mobile Antennas www.mars-antennas.com MA-VMB-5 698 MHz 6.5 GHz Multi Band Blade Antenna for Mobile Applications MARS Blade Antenna is a ruggedized, aerodynamic antenna, for use in mobile applications
INPAQ Global RF/Component Solutions
TVN 0201 01 SP0 Specification Product Name Series Part No Transient Voltage Suppressor TVS Series TVN 0201 01 SP0 Size EIA 0201 TVN 0201 01 SP0 Engineering Specification 1. Scope TVN 0201 01 SP0 is a TVS
GO1555 Voltage Controlled Oscillator
GO1555 Voltage Controlled Oscillator GO1555 Data Sheet Key Features Generates 1.485GHz or 1.485/1.001GHz signal for Gennum ICs Low power 20mW less than GO1525 50Ω output impedance Operates from a single
SKY LF: 2.4 to 2.5 GHz SP3T Switch
DATA SHEET SKY13586-678LF: 2.4 to 2.5 GHz SP3T Switch Applications 802.11 a/b/g/n/ac WLAN networks Bluetooth systems Smartphones Connectivity modules RF1 RF2 RFC Features Positive low voltage control:
Thin-Film Directional Couplers
42 High Directivity LGA Termination GENERAL DESCRIPTION ITF (Integrated Thin-Film) TECHNOLOGY The ITF High Directivity LGA Coupler is based on thin-film multilayer technology. The technology provides a
NxtG-V Install Manual
NxtG-V Install Manual 1. Product Overview 1.1. Check Parts List Before starting, check whether all the following items have been included with your NxtG-V. If anything is missing, please contact your supplier.
SKY LF: 0.1 to 6.0 GHz GaAs SPDT Switch
DATA SHEET SKY13446-374LF:.1 to 6. GHz GaAs SPDT Switch Applications Dual-band WLAN systems 82.11 a/b/g/n transmit/receive systems ANT Features Positive low voltage control: and 3. V Low insertion loss:.4
Wirewound Chip Inductors
FEATURES CERAMIC BODY, WIRE WOUND CHIP INDUCTOR SIZES K (0402) HIGH CURRENT AND LOW DCR *See Part Number System for Details REFLOW SOLDERING APPLICABLE TAPE & REEL PACKAGING FOR AUTOMATIC PICK-PLACE Specifications
SPECIFICATION PATENTED
SPECIFICATION PATENTED Part No. : TG.30.8112W Product Name : Apex White Right Angle TG.30 Ultra-Wideband 4G LTE Antenna Feature : LTE / GSM / CDMA /DCS /PCS / WCDMA / UMTS / HSDPA / GPRS / EDGE /GPS /Wi-Fi
DAGM-S1613-L0R DAGM-S1613-L0R
GPS/AGPS Module Multi-carrier,Multi-standard Cellular handsets. W-CDMA,GSM/EDGE,UMTS,PDC CDMA,etc. Telematics,Navigation/Security and Gaming/Tracking. FEATURES Supports GPS L1band C/A code The GSC3f is
*Note: Operation beyond this range is possible, but has not been characterized. PART. Maxim Integrated Products 1
19-8; Rev ; 2/ EVALUATION KIT AVAILABLE 8MHz to MHz Variable-Gain General Description The MAX6 general-purpose, high-performance variable-gain amplifier (VGA) is designed to operate in the 8MHz to MHz
Best practices for EMI filtering and IC bypass/decoupling applications
X2Y Component Connection and PCB Layout Guidelines Best practices for EMI filtering and IC bypass/decoupling applications X2Y Attenuators, LLC 1 Common X2Y Circuit Uses EMI FILTERING Conducted and Radiated
1000 MHz 2000 MHz 1000 MHz 2000 MHz 1000 MHz 2000 MHz 1000 MHz 2000 MHz ON Switching Time CTRL to 0.1 db final value, 2 GHz 200 ns
Product Description The PE4245 RF Switch is designed to cover a broad range of applications from near DC to 4 MHz. This switch integrates on-board CMOS control logic with a low voltage CMOS compatible
SPECIFICATION. : Pantheon Antenna 3in1 MA.710 Screw-Mount (Permanent Mount) 2 x 2G/3G/4G LTE MIMO Cellular Antenna 1 x GPS/GLONASS Antenna
SPECIFICATION Part No. : MA710.A.ABI.001 Product Name : Pantheon Antenna 3in1 MA.710 Screw-Mount (Permanent Mount) 2 x 2G/3G/4G LTE MIMO Cellular Antenna 1 x GPS/GLONASS Antenna Feature : 2 x Cellular
Multilayer Chip Antennas
FEATURES LIGHT WEIGHT, COMPACT WIDE BANDWIDTH LOW COST LTCC CONSTRUCTION SURFACE MOUNTABLE CONSTRUCTION TAPED AND REELED FOR AUTOMATIC INSERTION RoHS Compliant includes all homogeneous materials *See System
V DD Power supply voltage V. V I Voltage on any input -0.3 T ST T OP. PIN Input power (50Ω) 30 dbm V ESD
Product Description The PE4239 UltraCMOS RF switch is designed to cover a broad range of applications from DC through 3. GHz. This reflective switch integrates on-board CMOS control logic with a low voltage
SKY : 2.4 GHz Low-Noise Amplifier
DATA SHEET SKY65405-21: 2.4 GHz Low-Noise Amplifier Applications 802.11b/g/n PC cards, NICs, and USB dongles 802.11b/g/n tablets 802.11b/g/n access points, routers, and gateways 2.4 GHz ISM radios V_ENABLE
SECTION 1 IMP / UMP R107
1 SECTION 1 / UMP R107 Contents Introduction... 1-4 to 1-6 Characteristics...1-7 Board to board connectors...1-8 Receptacle packaging...1-9 Assembly instructions... 1-9 to 1-10 UMP Characteristics...1-11
SKY LF: 0.1 to 3.0 GHz GaAs SPDT Switch
DATA SHEET SKY13323-378LF:.1 to 3. GHz GaAs SPDT Switch Applications WLAN 82.11 b/g networks WLAN repeaters INPUT ISM band radios Low power transmit receive systems OUTPUT1 OUTPUT2 Features Positive voltage
SPECIFICATION PATENT PENDING. Embedded Flexible 4G LTE Wide Band Antenna MHz, MHz. Covers worldwide 2G/3G/4G Bands
SPECIFICATION PATENT PENDING Part No: Product Name: FXUB65.07.0180C Minima Embedded Flexible 4G LTE Wide Band Antenna 700-960MHz, 1700-2700MHz Features: Flexible Wideband Antenna Covers worldwide 2G/3G/4G
SKY LF: 20 MHz to 6.0 GHz GaAs SPDT Switch
DATA SHEET SKY13587-378LF: 2 MHz to 6. GHz GaAs SPDT Switch Applications WLAN 82.11 a/b/g/n networks Low power transmit/receive systems INPUT Industrial IoT Lighting OUTPUT1 OUTPUT2 Smart energy Connected
AOZ8102. Ultra-Low Capacitance TVS Diode Array. Features. General Description. Applications. Typical Application
Ultra-Low Capacitance TS Diode Array General Description The is a transient voltage suppressor array designed to protect high speed data lines from SD and lightning. This device incorporates eight surge
RClamp5011ZA. Ultra Small RClamp 1-Line, 5V ESD Protection. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics
- RailClamp Description RClamp TVS diodes are designed to protect sensitive electronics from damage or latch-up due to ESD. They are designed to replace 21 size multilayer varistors (MLVs) in portable
1, 2, 4 and 8-Channel Very Low Capacitance ESD Protectors
1, 2, 4 and 8-Channel Very Low Capacitance ESD Protectors CM1210 Features 1,2,4 and 8 channels of ESD protection Very low loading capacitance (1.0pF typical) ±6 kv ESD protection per channel (IEC 61000-4-2
HSP line ESD protection for high speed lines. Applications. Description. Features. µqfn 4 leads. Benefits. Complies with following standards
2-line ESD protection for high speed lines Datasheet - production data Benefits High ESD robustness of the equipment Suitable for high density boards Complies with following standards MIL-STD 883G Method
Part Number Order Number Package Marking Supplying Form
DESCRIPTION SP3T SWITCH FOR Bluetooth TM AND 802.11b/g GaAs INTEGRATED CIRCUIT PG2150T5L The PG2150T5L is a GaAs MMIC SP3T switch which was developed for Bluetooth and wireless LAN. This device can operate
Obsolete. Product Specification PE4210. Product Description. SPDT UltraCMOS RF Switch 10 MHz - 3 GHz Features Single 3-volt power supply
Product Description The PE421 UltraCMOS RF Switch is designed to cover a broad range of applications from 1 MHz to 3 GHz. This singlesupply switch integrates on-board CMOS control logic driven by a simple,