APPROVAL SHEET RJ45 1X1 DIP TAP DOWN GIGA WITH LED G/F3S. Address : Dongshan Industrial District, Nankang,Ganzhou Jiangxi

Size: px

Start display at page:

Download "APPROVAL SHEET RJ45 1X1 DIP TAP DOWN GIGA WITH LED G/F3S. Address : Dongshan Industrial District, Nankang,Ganzhou Jiangxi"

Roland Pearson
5 years ago
Views:

1 APPROVAL SHEET Customer Customer P/N Greenconn P/N Description 130-D309503C6H RJ45 1X1 DIP TAP DOWN GIGA WITH LED G/F3S Customer approval Supplier Supervisor Eric Engineer Tank GREENCONN TECHNOLOGY (GANZHOU) CO., LTD. Address : Dongshan Industrial District, Nankang,Ganzhou Jiangxi Division : RJ45 Project Dept. Contact Person : TEL No.: FAX No.: 1/9

2 1. MECHANICAL DIMENSION 1.1 Product Dimension and PCB Layout 2/9

3 1.2 Standard RJ45 Plug Specification All dimensions follow : FCC subpart F, 68,500, Figure (C)(2)(i) & (C)(2)(ii) & (C)(3)(i) IEC All plugs must be meeting the requirements of plug Go & No-Go gauge. Gauge follow : FCC subpart F, 68,500, Figure (C)(4)(i) & (C)(5)(i) There must be no damage to Housing and Locking Latch There must be no nicks and cuts in cable Durability : 750 cycles generally 3/9

4 2. REQUIREMENTS 2.1 Application Scope This specification apply to Greenconn RJ45 product. 2.2 Application Environment Operating Temperature Range -40 ~ Operating Humidity Range 20%~80% Storage /Temperature Range -45 ~ Storage Humidity Range 20%~80% 2.3 Material Housing: LCP,UL94V-0,Color:BLACK; RJ45 terminal:phosphor BRONZE. Plating:G/F Plated on contact area,80u"~160u" TIN plated on solder area,50u"~100u" NI under plated overall, PHY terminal:brass Plating: 50u" NICKEL Min. Under plated:all over 100u" TIN Min. Plated all over Shell: Stainless steel 4/9

5 2.5 RJ45 specifications Insulation Resistance : 500MΩ min Insertion force with the latch depressed: 22N max Removal force with the latch depressed: 44N max Locking Force of Plug Latch: 50N 60+/-5 sec 2.4 Performance and Test Description Product is designed to meet electrical, mechanical and environmental performance requirements specified in below table. All tests are performed at ambient environmental conditions per MIL-STD-1344A and EIA-364 unless otherwise specified. 2.5 Packaging and Packing All parts shall be packaged and packed to protect against physical damage corrosion and deterioration during shipment and storage. 5/9

6 3.ELECTRICAL CHARACTERISTICS 3.1 Schematic 1CT : 1CT P 2 J 1 PC BOARD CONNECTIONS P 3 J 2 1CT : 1CT P 4 J 3 P 5 J 6 1CT : 1CT P 6 J 4 P 7 J 5 1CT : 1CT P 8 J 7 RJ45 CONNECTIONS P 9 P 1 P 10 J 8 L2 L1 6/9

7 3.2 Transmitter filter & Receiver filter Type : Balance low pass 100Ω impedance Test Seq. Test Parameter Requirements HI POT P2-P3TO J1-J2 1500VAC/1mA/1M P4-P5TO J3-J6 1500VAC/1mA/1M P6-P7TO J4-J5 1500VAC/1mA/1M P8-P9TO J7-J8 1500VAC/1mA/1M Insertion loss Insertion Loss:@ MHz -1.0dB Max Return 1-30 MHz -18dB Min.LOAD MHz -16dB Min. LOAD MHz -12dB Min. LOAD MHz -10dB Min. LOAD 100 Ω Common mode to common mode rejection CARR@ MHz -30dB Min Crosstalk Cross Talk:@ MHz -30dB Min Inductance 350uH 8mA DC Bias. 7/9

8 4.ORDERING INFORMATION L1+/L2- L1-/L2+ L3+/L4- L3-/L4+ P9+/P10- P9-/P10+ P11+/P12- P11-/P12+ Tap Down P11+/P12- P11-/P12+ P13+/P14- P13-/P14+ W/O W/O W/O W/O GREEN YELLOW GREEN YELLOW YELLOW GREEN 8/9

9 5.RECOMMEND WAVE SOLDERING PROFILE PARAMETER PREHEAT TEMPERATURE GRADIENT REFERENCE LEAD FREE SPECIFICATION +1~4 /sec PREHEAT TIME t sec PREHEAT TEMPERATURE T1 >100 SOLDER POT TEMPERATURE T PEAK 265 ±5 DWELL TIME t2 5sec TYP PEAK BOARD TOP TEMPERATURE 190 COOLING TEMPERATURE GRADIENT -6 /sec Max. 9/9

RH R13. Description: USB 3.0 Over RJ45 Through Hole 10/100/1000 Base-T Contact Area : 30μ Gold LED:L-Green/Orange;R-Yellow

RH R13. Description: USB 3.0 Over RJ45 Through Hole 10/100/1000 Base-T Contact Area : 30μ Gold LED:L-Green/Orange;R-Yellow To: Customer P/N: UDE P/N: Description: USB 3.0 Over RJ45 Through Hole 10/100/1000 Base-T Contact Area : 30μ Gold LED:L-Green/Orange;R-Yellow Spec No. RH20006-00 Update Date 2014/8/27 Revision C Approved