SASY 60i Busbar System. SASY 60i Busbar System

Transcription

1 Table of Contents SASY 60i Busbar System System up to 630 A for flat busbars System up to 1250, 1600 A for profile busbars Covers for 630, 1250 and 1600 A systems Feeder circuit adapters for 630, 1250 and 1600 A systems Terminals for 630, 1250 and 1600 A systems Lengthwise busbar connections for 630, 1250 and 1600 A systems Busbar adaptors as single devices Busbar adaptors as complete units Slide fuse equipment, 3-pole Multi-layer copper band, insulated Line supports Page xx Page xx Page xx Page xx Page xx Page xx Page xx Page xx Page xx Page xx Page xx 1

2 SASY 60i Busbar System Components now also conforming to UL-standards for control systems 60 mm spacing between busbars 630, 1250 and 1600 A rated current Adapter technology for NZM1 to 3 Adapter technology for xstart Slide fuse equipment Connection technique Technical data as of page xx. VT20106 VT20406 VT20706 VT

3 Systems up to 630 A for Flat Busbars Poles Max. Special Features Utilisation Designation Notes Units per Rated Oper- Article No. Package ational Current Number Ie (A) VT12706 IEC Busbar Support With snap-in slide 12 x 5/10 BBS-3/FL With pre- 10 units for adapting 15 x 5/ drilled holes to the respective 20 x 5/10 inside for size of the bar 25 x 5/10 screw-fixing 30 x 5/10 VT12806 UL Busbar Support With snap-in slide 12 x 5/10 BBS-3/FL-NA With pre- 10 units for adapting to 20 x 5/ drilled holes the respective 30 x 5/10 inside for size of the bar screw-fixing If used in feeder circuits according to UL 508A up to 600 V, it is necessary use the BBC-BT-NA base plate in addition. VT14006 End Cover To ES-BBS-3/FL 10 units cover the busbar ends for BBS-3/FL and BBS-3/FL-NA VT19806 UL Base Plate To be used when Necessary BBC-BT-NA 1100 mm 2 units the air gap between for UL support long fully equipped BBS-3/FL-NA busbar systems and mounting plate is insufficient VT13006 PE/N Earth/Neutral Busbar Support With snap-in slide 12 x 5/10 BBS-2/FL can be 10 units for adapting to the 15 x 5/ mounted respective size of 20 x 5/10 individually the bar 25 x 5/10 30 x 5/10 VT With snap-in slide 12 x 5/10 BBS-1/FL can be 10 units for adapting to the 15 x 5/ mounted respective size of 20 x 5/10 individually the bar 25 x 5/10 30 x 5/10 3

4 Poles Max. Rated Special Features Utilisation Designation Notes Units Operational Article No. per Package Current Number Ie (A) VT19706 Busbar Covers 12 x 5 BBC-FL x5 10 units 15 x mm 20 x 5 long 25 x 5 30 x 5 VT x 10 BBC-FL x10 10 units 15 x mm 20 x 10 long 25 x x 10 Max. Rated Dimension Length Designation Notes Units Operational (mm x mm) (mm) Article No. per Package Current Ie (A) wa_vt00408 wa_vt00308 Copper Flat Rails x CU12X5 tinned 10 units CU12X tinned 10 units x CU20X5 tinned 10 units CU20X tinned 10 units x CU20X10 tinned 10 units CU20X tinned 10 units x CU30X10 untreatedly 10 units

5 Systems up to 1250, 1600 A for Profile Bars Poles Max. Special Features Utilisation Designation Notes Units per Rated Oper- Article No. Package ational Current Number Ie (A) VT12906 Busbar Support Double-T-Profile Suitable as Double-T- BBS-3/PR With pre-drilled 3 units lateral and central Profile holes inside support for screwfixing VT Suitable for Double-T- BBS-1/PR With pre-drilled 10 units setting up a Profile holes inside PE or for scew- N bar fixing VT13906 End Cover For the ES-BBS-3/PR 4 units BBS-3/PR support VT19806 VT19206 UL Base Plate To be used when For BBC-BT-NA 1100 mm 2 units the air gap UL508A long between fully systems equipped busbar necessarily systems and the mounting plate is insufficient Double-T-Profile Busbar ) Tin-plated For CU-BAR-500/T2400 mm 1 unit Cross-section BBS-3/PR long 500 mm 2 and BBS-1/PR supports VT ) Tin-plated For CU-BAR-720/T 2400 mm 1 unit Cross-section BBS-3/PR long 720 mm 2 and BBS-1/PR supports VT19506 Busbar Cover Fór BBC-CU-BAR/PR 1000 mm 5 units double-t long profile 1) At a busbar temperature of 87.5 C and an ambient temperature of 35 C, please refer to the current load diagram in the Technical Data section for further values. 5

6 Covers for 630, 1250 and 1600 A Systems Utilisation Designation Notes Units per Package Article No. VT19306 Spare Section Cover - Modular To cover BBC-RCOV mm long. 2 units the front of To be used with the 60 mm system BBC-MRCOV1 support only VT17006 Support for Spare Section Cover Suits any thickness BBC-MRCOV1 To be used with 10 units of bars spare section cover BBC-RCOV1 only VT12006 Cover complete For BBC-CS1 228 mm long 1 unit 3-pole systems VT12006 BBC-CS2-T/B BBC-CS2-F System Cover - Kit Cover Profile - Front For BBC-CS2-F 1100 mm long 1 unit 3-pole systems Cover Profile - Top/Bottom BBC-CS2-T/B 1100 mm long 2 units BBC-MCS2 Support Set for Cover Profile For BBC-MCS2 1 set 1 unit 3-pole includes a systems right and left side support Single covers VT19006 VT18906 SG13506 Compartment Section Double-T For 3-pole BBC-CS48/PR 48 mm high 1 unit systems with mm long BBS-3/PR To be fixed at the (profile) bar support For 3-pole BBC-CS76/PR 76 mm high 1 unit systems with mm long BBS-3/PR To be fixed at the (profile) bar support Front Plate Cover for front plate cut-out Cover module AM-195/54 54 mm width 15 units for cut-out Height = 195 mm 6

7 Feeder Circuit Adapters for 630, 1250 and 1600 A Systems Poles Max. Type of Conductor 1) Utilisation Designation Notes Units per Rated Oper- Article No. Package ational Current Number Ie (A) VT05207 Connecting Terminal Plates mm 2 12x5/10 BBA-TP3/16 20 mm wide. 1 unit AWG 16-15x5/ With spring-type AWG 6. 20x5/10 terminal technology. 25x5/10 30x5/10 Double-T-Profile VT mm 2 12x5/10 BBA-TP3/50 54 mm wide. 1 unit AWG 10-15x5/ Terminals can be AWG 2/0. 20x5/10 removed 25x5/10 for connecting 30x5/10 non-cut 6x9x0.8 Double-T-Profile conductors. Looping them through is possible. VT mm 2 12x5/10 BBA-TP3/ mm wide. 1 unit AWG 2-15x5/ Terminals can be MCM x5/10 removed 25x5/10 for connecting 30x5/10 non-cut 10x16x0.8 Double-T-Profile conductors Looping them through is possible. 1) Round conductor, single-wired Round conductor, fine-wired with expertly pressed wire end ferrule Round conductor, multi-wired Sector conductor, single-wired Sector conductor, multi-wired Cu-Band Cu-Bar 7

8 Feeder Circuit Adapters for 630, 1250 and 1600 A Systems Poles Max. Type of Conductor 1) Utilisation Designation Notes Units per Rated Oper- Article No. Package ational Current Number Ie (A) VT19606 VT12006 VT19606 VT12006 Connecting Set with Cover 3 x mm 2 20x5/10 BBA-TP3/ mm wide. 1 unit MCM300-25x5/ Clearance between MCM x5/10 poles can be adjusted Double-T-Profile as required. To be fixed directly on top of the busbar terminal. Incl. cover cap in flexible width. 1 set includes 3 pole elements. Looping through is possible. 3 x Up to 20x5/10 BBA-TP3/CU-BAND mm wide. 1 unit 10x32x1 25x5/ Clearance between 30x25 30x5/10 poles can be Double-T-Profile adjusted as required. To be fixed directly on top of the busbar terminal. Incl. cover cap in flexible width. 1 set includes 3 pole elements. Looping through is possible. VT09408 VT x Up to 30x10 BBA-TP3/ mm wide. 1 unit (2x)10x50x1 Double-T-Profile Co-ordinated up Up to for Moeller NZM4. (2x)50x10 To be fixed directly on top of the busbar terminal. Incl. cover cap. 1 set includes 3 pole elements. Looping through is possible. 1) Round conductor, single-wired Round conductor, fine-wired with expertly pressed wire end ferrule Round conductor, multi-wired Sector conductor, single-wired Sector conductor, multi-wired Cu-Band Cu-Bar 8

9 Terminals for 630, 1250 and 1600 A Systems Max. Type of 1) Special Features Utilisation Designation Notes Units Rated Oper- Conductor Article No. per Package ational Current Ie (A) VT13306 Brace Terminals mm 2, Connection method 20x5/10 AKS185 Contacting of 6 units AWG3/0 - to busbars 25x5/ wire and busbar MCM350. without drilling 30x5/10 via a directy Double-T-Profile cable bed terminated, VT mm 2, Connection method 20x5/10 AKS300 Contacting of 3 units MCM300 - to busbars 25x5/ wire and busbar MCM600. without drilling 30x5/10 via a directly Double-T-Profile cable bed terminated, VT Connection method 20x5/10 AKS-CU-BAND Contacting of 3 units 3x20x1 to busbars 25x5/ wire and busbar to without drilling 30x5/10 via 2x(10x32x1) Double-T-Profile a contacting block 32x25 VT Up to Connection method 20x5/10 AKS1000 Contacting of 3 units (2x)10x50x1 to busbars 25x5/ wire and busbar Up to without drilling 30x5/10 via (2x)50x10 Double-T-Profile a contacting block VT17906 Profile Terminals 2) mm 2, Connection method Double-T- AKP800 In case of 3 units Termination to busbars Profile parallel connection space without drilling of multi-layer 41 x copper bars, please place spacers in between VT mm 2, Connection method Double-T- AKP1000 In case of 3 units Termination to busbars Profile parallel connection space without drilling of two multi-layer 51 x copper bars, please place spacers in between 1) Round conductor, single-wired Round conductor, fine-wired with expertly pressed wire end ferrule Round conductor, multi-wired Sector conductor, single-wired Sector conductor, multi-wired Cu-Band Cu-Bar 2) For a UL508A system with profile terminals you need to use the UL base plate BBC-BT-NA and the busbar cover BBC-CU-BAR/PR. 9

10 Terminals for 630, 1250 and 1600 A Systems Max. Type of Conductor 1) Special Features Utilisation Designation Units Rated Oper- Article No. per Package ational Current Ie (A) VT18406 Universal Conductor Terminal 5 mm mm 2, With integrated All flat AKU16/5 100 units AWG 14 - retaining spring, busbars of AWG 6. captive terminal a thickness directly screw of 5 mm terminated, 8x6x0.5 VT mm 2, With integrated All flat AKU35/5 50 units AWG 10 - retaining spring, busbars of AWG 2. captive terminal a thickness directly screw of 5 mm terminated, 3x9x0.8 or 6x9x0.8 VT mm 2, With integrated All flat AKU70/5 25 units AWG 4 - retaining spring, busbars of AWG 2/0. captive terminal a thickness directly screw of 5 mm terminated, 2x(3x9x0.8) or 6x9x0.8 VT mm 2, With integrated All flat AKU120/5 25 units AWG 4 - retaining spring, busbars of MCM 250. captive terminal a thickness directly screw of 5 mm terminated, 4x16x0.8 or 6x16x0.8 or 10x16x0.8 1) Round conductor, single-wired Round conductor, fine-wired with expertly pressed wire end ferrule Round conductor, multi-wired Sector conductor, single-wired Sector conductor, multi-wired Cu-Band Cu-Bar 10

11 Terminals for 630, 1250 and 1600 A Systems Max. Type of Conductor 1) Special Features Utilisation Designation Units Rated Oper- Article No. per Package ational Current Ie (A) VT13806 Universal Connection Terminal 10 mm mm 2, With integrated All flat busbars AKU16/ units AWG 14 - retaining spring, of a thickness AWG 6. captive terminal of 10 mm directly screw terminated, 8x6x0.5 VT mm 2, With integrated All flat busbars AKU35/10 50 units AWG 10 - retaining spring, of a thickness AWG 2. captive terminal of 10 mm directly screw terminated, 3x9x0.8 or 6x9x0.8 VT mm 2, With integrated All flat busbars AKU70/10 25 units AWG 4 - retaining spring, of a thickness AWG 2/0. captive terminal of 10 mm, directly screw double-t-profile terminated, 2x(3x9x0.8) or 6x9x0.8 VT mm 2, With integrated All flat busbars AKU120/10 25 units AWG 4 - retaining spring, of a thickness MCM 250. captive terminal of 10 mm, directly screw double-t-profile terminated, 4x16x0.8 or 6x16x0.8 or 10x16x0.8 1) Round conductor, single-wired Round conductor, fine-wired with expertly pressed wire end ferrule Round conductor, multi-wired Sector conductor, single-wired Sector conductor, multi-wired Cu-Band Cu-Bar 11

12 Lengthwise Bar Connections for 630, 1250 and 1600 A Systems Max. Length Special Features Utilisation Designation Notes Units per Rated Oper- Article No. Package ational Current Ie (A) (mm) VT18506 Busbar Connecting Terminals For identically 12 x 5/10 BBT-CU12-20X5/ Spacing 3 units shaped, flat 15 x 5/ between systems copper bars 20 x 5/10 up to 110 mm VT For identically 20 x 5/10 BBT-CU20-30X5/10-95 Spacing 3 units shaped, flat 25 x 5/ between systems copper bars 30 x 5/ mm. Max. permissible mis-alignment of bars is 5 mm VT For identically 20 x 5/10 BBT-CU20-30X5/ Spacing 3 units shaped, flat 25 x 5/ between systems copper bars 30 x 5/ mm. Max. permissible mis-alignment of bars is 5 mm VT For different Double-T- BBT-CU-BAR500/ Spacing 6 units and identical profile between systems types of double mm. T-profile bars Max. permissible mis-alignment of bars is 2 mm VT For different Double-T- BBT-CU-BAR500/ Spacing 3 units and identical profile between systems types of double mm. T-profile bars Max. permissible mis-alignment of bars is 5 mm 12

13 NZM Busbar Adapter, 3-pole 1), for Copper Bars x 5/10, Double-T-Profile Max. Rated Adapter Adapter Special Features Utili- Designation Notes Units Rated Operational Width Length sation Article No. per Package Oper. Current Voltage Ie (A) Ue (V) (mm) (mm) VT16206 VT17706 VT04008, VT17706 Busbar Adapter NZM For connecting NZM1 NZM1-XAD160 For 1 unit to the system PN switches at the top through N1 with standard fixed connection NS1 connection bars included in the frame-type scope of delivery 2) terminals. To be snapped onto the busbar by means of a combi-base For connecting NZM2 NZM2-XAD250 Use only in 1 unit to the system PN combinatiion at the top/bottom N2 with through a tube- NS2 auxiliary type type of connection (+)NZM2-XKR4. at the rear. To be screwed Tube included in the onto the scope of delivery. busbar by means of a claw-type of clamp For connecting NZM3 NZM3-XAD630 Use only in 1 unit to the system PN combination at the top/bottom N3 with through a tube- auxiliary type type of connection (+)NZM3-XKR13. at the rear. To be screwed Tube included in the onto the scope of delivery. busbar by means of a claw-type of clamp. VT18806 VT18706 Terminal for device adadpter NZM To cover the NZM2 NZM2-XKR4 For device 1 unit connection PN combination to the system N2 NZM2 use at the top/bottom NS2 with auxiliary type +NZM2-XKR4O or +NZM2-XKR4U To cover the NZM3 NZM3-XKR13 For device 1 unit connection PN combination to the system N3 NZM3 at the top/bottom use with auxiliary type +NZM3-XKR13O or +NZM3-XKR13U 1) To be snapped onto the voltage-free busbar. 2) Thanks to the combi-base it can be adjusted to a bar width of both 5 and 10 mm, cross-section of conductor 6 x 9 x

14 xstart Busbar Adaptor, 3-pole 1) Max. Rated Wire Adapter Adapter Support Utilisation Designation Notes Units Rated Oper- Operational Cross Width Length Rails Article No. per ational Current Voltage Section Package Ie (A) Ue (V) (mm) (mm) VT15906 VT14306 xstart Busbar Adaptor 25 A AWG PKZM0+ BBA0-25 Direct 4 units Contactor DIL M starter Contactor DIL M 9 set Contactor DIL M 12 PKZM0-XDM12 Contactor DIL M 15 MSC-D-0.25-M7 to MSC-D-16-M AWG PKZM0+ BBA0R-25 Reversing 2 units 2x Contactor DIL M starter 2x Contactor DIL M 9-01 set 2x Contactor DIL M PKZM0-XRM12 MSC-R-0.25-M7... to MSC-R-12-M12 VT15306 xstart Busbar Adaptor 25 A, Universal Type AWG Support rail BBA0-25/2TS 4 units adjustable on the 1.25 mm grid VT15706 xstart Busbar Adaptor 32 A AWG PKZM0+ BBA0-32 Electrical 4 units Contactor DIL M contact Contactor DIL M 25 module Contactor DIL M 32 PKZM0-XM32 DE MSC-D-16-M17... to MSC-D-32-M32 VT AWG PKZM0+ BBA0R-32 Electrical 2 units 2x Contactor DIL M contact 2x Contactor DIL M module 2x Contactor DIL M PKZM0-XM32 DE MSC-R-16-M17... Reverse to wiring set MSC-R-32-M32 DILM32-XRL wa_vt00608 xstart Busbar Adaptor 32 A, for Spring-type Terminal Support rail BBA0-32/2TS-C With 4 units adjustable on spring-type the 1.25 mm terminal grid technology, up to mm 2. For example for 1-phase applikations. 1) Can be used with all busbars in a 60 mm system. Thanks to the combi-base it is suitable for both 5 mm and 10 mm thickness of the bar as well as for double-t-profile bars. To be snapped onto the voltage-free busbar. 14

15 xstart Busbar Adaptor, 3-pole 1) Max. Rated Wire Adapter Adapter Support Utilisation Designation Notes Units Rated Oper- Operational Cross Width Length Rails Article No. per ational Current Voltage Section Package Ie (A) Ue (V) (mm) (mm) VT16406 xstart Busbar Adaptor 63 A AWG PKZ2+ BBA2L-63 2 units Contactor DIL M Contactor DIL M 9 Contactor DIL M 12 Contactor DIL M 17 Contactor DIL M 25 Contactor DIL M 32 Contactor DIL M AWG PKZ2 BBA units VT AWG PKZ2+ BBA2-63/2TS 4 units Contactor DILM7 - DILM15 DILM17 - DILM38 DILM40 - DILM 65 Switch drive SE1A-PKZ2 and S-PKZ2 in connection with clipsplate C-PKZ AWG PKZM4+ BBA4L-63 Electrical 4 units Contactor DIL M connector Contactor DIL M 25 for Contactor DIL M 32 PKZM4+DILM40 65: Contactor DIL M 40 PKZM4-XM65 DE Contactor DIL M 50 Contactor DIL M AWG PKZM4 BBA units xstart Busbar Adaptor 80 A universal BBA2-80/2TS-S with screw- 4 units type terminal technology up to AWG6, for example for 1-phase applications (not UL/CSA compatible without an additional component) 1) Can be used with all busbars in a 60 mm system. Thanks to the combi-base it is suitable for both 5 mm and 10 mm thickness of the bar as well as for double-t-profile bars. To be snapped onto the voltage-free busbar. 15

16 xstart Busbar Adaptor, 3-pole 1) Max. Rated Wire Adapter Adapter Support Utilisation Designation Notes Units Rated Oper- Operational Cross Width Length Rails Article No. per ational Current Voltage Section Package Ie (A) Ue (V) (mm) (mm) VT16106 VT16806 xstart Busbar Adaptor, Universal Type Support rail BBA0/2TS-L Without 4 units adjustable on electrical the 1.25 mm contacting, grid auxiliary to BBA for the setup of reversing starters, for example Support rail BBA4/2TS-L Without 4 units adjustable on electrical the 1.25 mm contacting, grid auxiliary to BBA for the setup of reversing starters, for example VT16906 Side Module BBA-XSM Can be 10 units placed on both sides of BBA, to increase the add-on width Accessories Width (mm) Notes Type Designation Article No. Units per package wa_vt00508 Support rail 45 Used for 54 BBA adapter Connecting cable Used for BBA with screw-type or spring-type terminals Double adapter Z-SS-60-ADD/6 Cross section 6 mm 2 - I e = 35 A PKZM0-XMR units PKZM0-XMR units PKZM0-XMR units BBA-XLT units BBA-XLT units Width (mm) / MU / Cross section Type Designation Article No. Units per package wa_sg / 2,5 / 6mm 2 54 / 3 / 6mm 2 72 / 4 / 6mm 2 81 / 4,5 / 6mm 2 Z-SS-60-ADD/ / 10 units Z-SS-60-ADD/ / 10 units Z-SS-60-ADD/ / 10 units Z-SS-60-ADD/ / 10 units 1) Can be used with all busbars in a 60 mm system. Thanks to the combi-base it is suitable for both 5 mm and 10 mm thickness of the bar as well as for double-t-profile bars. To be snapped onto the voltage-free busbar. 16

17 xstart-busbar Adaptor, 3-pole 1), MSC-D /BBA Motorstarter Motorstarter Betätigungsspannung Betätigungsspannung 230 V 50 Hz 24 V DC Motor data Rated Rated Components Designation Units Designation Units Oper- Oper- Article No. per Article No. per ational ational Package Package Power Current AC3 400 V 380 V 400 V 415 V P (kw) Ie (A) VT04608 Symbol photo *) PKZM0-0,25 MSC-D-0,25-M7(230V50Hz)/BBA 1 unit MSC-D-0,25-M7(24VDC)/BBA 1 unit +DILM PKZM0-XDM12 +BBA PKZM0-0,4 MSC-D-0,4-M7(230V50Hz)/BBA 1 unit MSC-D-0,4-M7(24VDC)/BBA 1 unit +DILM PKZM0-XDM12 +BBA PKZM0-0,63 MSC-D-0,63-M7(230V50Hz)/BBA 1 unit MSC-D-0,63-M7(24VDC)/BBA 1 unit DILM PKZM0-XDM12 +BBA PKZM0-1 MSC-D-1-M7(230V50Hz)/BBA 1 unit MSC-D-1-M7(24VDC)/BBA 1 unit +DILM PKZM0-XDM12 +BBA PKZM0-1,6 MSC-D-1,6-M7(230V50Hz)/BBA1 unit MSC-D-1,6-M7(24VDC)/BBA 1 unit DILM PKZM0-XDM12 +BBA PKZM0-2,5 MSC-D-2,5-M7(230V50Hz)/BBA1 unit MSC-D-2,5-M7(24VDC)/BBA 1 unit +DILM PKZM0-XDM12 +BBA PKZM0-4 MSC-D-4-M7(230V50Hz)/BBA 1 unit MSC-D-4-M7(24VDC)/BBA 1 unit DILM PKZM0-XDM12 +BBA PKZM0-6,3 MSC-D-6,3-M7(230V50Hz)/BBA1 unit MSC-D-6,3-M7(24VDC)/BBA 1 unit +DILM PKZM0-XDM12 +BBA PKZM0-10 MSC-D-10-M7(230V50Hz)/BBA 1 unit MSC-D-10-M7(24VDC)/BBA 1 unit +DILM PKZM0-XDM12 +BBA PKZM0-10 MSC-D-10-M9(230V50Hz)/BBA 1 unit MSC-D-10-M9(24VDC)/BBA 1 unit +DILM PKZM0-XDM12 +BBA PKZM0-12 MSC-D-12-M12(230V50Hz)/BBA 1 unit MSC-D-12-M12(24VDC)/BBA 1 unit +DILM PKZM0-XDM12 +BBA PKZM0-16 MSC-D-16-M17(230V50Hz)/BBA 1 unit MSC-D-16-M17(24VDC)/BBA 1 unit +DILM PKZM0-XM32 +BBA PKZM0-25 MSC-D-25-M25(230V50Hz)/BBA 1 unit MSC-D-25-M25(24VDC)/BBA 1 unit +DILM PKZM0-XM32 +BBA PKZM0-32 MSC-D-32-M32(230V50Hz)/BBA 1 unit MSC-D-32-M32(24VDC)/BBA 1 unit +DILM PKZM0-XM32 +BBA0-32 *) Technical details see Moeller main catalogue Industrial Switch Gear 1) Can be used with all busbars in a 60 mm system. Thanks to the combi-base it is suitable for both 5 mm and 10 mm thickness of the bar as well as for double-t-profile bars. To be snapped onto the voltage-free busbar. 17

18 xstart-busbar Adaptor, 3-pole 1), MSC-R /BBA Motorstarter Motorstarter Betätigungsspannung Betätigungsspannung 230 V 50 Hz 24 V DC Motor data Rated Rated Components Designation Units Designation Units Oper- Oper- Article No. per Article No. per ational ational Package Package Power Current AC3 400 V 380 V 400 V 415 V P (kw) Ie (A) VT04508 Symbol photo *) PKZM0-0,25 MSC-R-0,25-M7(230V50Hz)/BBA 1 unit MSC-R-0,25-M7(24VDC)/BBA 1 unit +2xDILM PKZM0-XMR12 +BBA0R PKZM0-0,4 MSC-R-0,4-M7(230V50Hz)/BBA 1 unit MSC-R-0,4-M7(24VDC)/BBA 1 unit +2xDILM PKZM0-XMR12 +BBA0R PKZM0-0,63 MSC-R-0,63-M7(230V50Hz)/BBA 1 unit MSC-R-0,63-M7(24VDC)/BBA 1 unit xDILM PKZM0-XMR12 +BBA0R PKZM0-1 MSC-R-1-M7(230V50Hz)/BBA 1 unit MSC-R-1-M7(24VDC)/BBA 1 unit +2xDILM PKZM0-XMR12 +BBA0R PKZM0-1,6 MSC-R-1,6-M7(230V50Hz)/BBA 1 unit MSC-R-1,6-M7(24VDC)/BBA 1 unit xDILM PKZM0-XMR12 +BBA0R PKZM0-2,5 MSC-R-2,5-M7(230V50Hz)/BBA 1 unit MSC-R-2,5-M7(24VDC)/BBA 1 unit +2xDILM PKZM0-XMR12 +BBA0R PKZM0-4 MSC-R-4-M7(230V50Hz)/BBA 1 unit MSC-R-4-M7(24VDC)/BBA 1 unit xDILM PKZM0-XMR12 +BBA0R PKZM0-6,3 MSC-R-6,3-M7(230V50Hz)/BBA 1 unit MSC-R-6,3-M7(24VDC)/BBA 1 unit +2xDILM PKZM0-XMR12 +BBA0R PKZM0-10 MSC-R-10-M7(230V50Hz)/BBA 1 unit MSC-R-10-M7(24VDC)/BBA 1 unit +2xDILM PKZM0-XMR12 +BBA0R PKZM0-10 MSC-R-10-M9(230V50Hz)/BBA 1 unit MSC-R-10-M9(24VDC)/BBA 1 unit +2xDILM PKZM0-XMR12 +BBA0R PKZM0-12 MSC-R-12-M12(230V50Hz)/BBA 1 unit MSC-R-12-M12(24VDC)/BBA 1 unit +2xDILM PKZM0-XMR12 +BBA0R PKZM0-16 MSC-R-16-M17(230V50Hz)/BBA 1 unit MSC-R-16-M17(24VDC)/BBA 1 unit +2xDILM PKZM0-XMR32 +DILM32-XRL PKZM0-25 MSC-R-25-M25(230V50Hz)/BBA 1 unit MSC-R-25-M25(24VDC)/BBA 1 unit +2xDILM PKZM0-XMR32 +DILM32-XRL PKZM0-32 MSC-R-32-M32(230V50Hz)/BBA 1 unit MSC-R-32-M32(24VDC)/BBA 1 unit +2xDILM PKZM0-XMR32 +DILM32-XRL *) Technical details see Moeller main catalogue Industrial Switch Gear 1) Can be used with all busbars in a 60 mm system. Thanks to the combi-base it is suitable for both 5 mm and 10 mm thickness of the bar as well as for double-t-profile bars. To be snapped onto the voltage-free busbar. 18

19 Slide Fuse Equipment, 3-pole Max. Rated Component Width Utilisation Designation Notes Units Rated Oper- Voltage Size Article No. per Package ational Current Ie (A) Ue (V AC) SG15007 D-Type Slide Fuse-Base Incl. shock hazard protection cover with front and bottom plate and marking label Delivered empty, without screw caps E18, D x 5/10 D02-SO/63/3-R-27 Cartridge-ring 10 units 20 x 5/ adapter insert 25 x 5/ x 5/10 Z-D02/R/3-36 Cartridge-ring 60 units Double-T adapter insert 54 Z-D02/R/3-54 Cartridge-ring 40 units adapter insert SG E27, D II x 5/10 DII-SO/25/3-R Gauge ring 10 units 20 x 5/ x 5/10 30 x 5/10 Double-T DII-SO/25/3-R-PS Screw-in 10 units gauge ring SG E33, D III x 5/10 DIII-SO/63/3-R Gauge ring 10 units 20 x 5/ x 5/10 30 x 5/10 Double-T DIII-SO/63/3-R-PS Screw-in 10 units gauge ring SG15205 Covers Set for covering busbar support 36 D02 Z-D02-S-AB-SET Suitable for 10 units D02-SO/63/3-R-27 SG04407 Side cover DII. SBS-RS60 Suitable for 10 units DII.-SO/.../3-R SG11205 Wa_sg02502 Screw Caps E18, D02 D02-SO... Z-D02/SK 20/ E27, D II DII-SO... Z-DII/SK 50/ E33, D III DIII-SO... Z-DIII/SK 30/ E33, D III DIII-SO... Z-DIII/SK Adapter Spring to accommodate D01 fuse-links in Z-D02/SK screw caps 16 D02-D01 Z-D02/SIKA-HF 50/ Accessories: For fuse-links, cartridge-ring adapter inserts, gauge rings and screw-in gauge rings see chapter Accessories Fuse Devices 19

20 Slide Fuse Equipment, 3-pole Max. Rated Component Width Utilisation Designation Notes Units Rated Oper- Voltage Size Article No. per Package ational Current Ie (A) Ue (V AC) SG18705 D02 Switch-Disconnector-Fuse Incl. shock hazard protection cover with front and bottom plate Delivered empty, without screw caps E18, D x 5/10 D02-S/63/3-RS Cartridge-ring 10 units 30 x 5/ adapter insert Double-T SG11205 Screw Cap E18, D02 D02-SO... Z-D02/SK 20/ Wa_sg02502 Adapter Spring to accommodate D01 fuse-links in Z-D02/SK screw caps 16 D02-D01 Z-D02/SIKA-HF 50/ Accessories: For fuse-links, cartridge-ring adapter inserts see chapter Accessories Fuse Devices SG16007 D02 Switch-Disconnector-Fuse with visual tripping indicator Visiual tripping indicator is flashing Delivered empty, without cartridge-ring adapter inserts and fuse-links Delivered with adapter springs for D01-fuse-links or cylindrical fuse-links 10x38 Contact position indicator red - green Plug-in technique without screw caps All-pole and hand independent switching of load Version D02-LTS/63/3-R-HK with incorporated auxliliary switch seal- and lockable E18, D x 5/10 D02-LTS/63/3-R Cartridge-ring 3 units C 10x38 15 x 5/ adapter insert 20 x 5/10 without auxiliary 25 x 5/10 switch 30 x 5/10 Double-T D02-LTS/63/3-R-HK Cartridge-ring 3 units adapter insert with auxiliary switch Accessories for D02-LTS/63/3-R.. D0 fuse-links Z-D0./SE-... Cartridge-ring adapter inserts D01: Z-D02-D01/PE-... D02: Z-D02/PE-... Adapter spring Z-D02-LTS-HF (scope of delivery) C fuse-links Z-C10/SE-... Adapter spring Z-D02-LTS-HF (scope of delivery) See chapter Accessories Fuse Devices SG18907 Adapter Spring to accommodate D01 fuse-links or cylindrical fuse-links 10x38 in the switch-disconnector-fuse D02-LTS/ D02-D01 Z-D02-LTS-HF 12 / C 10x Accessories: For fuse-links, cartridge-ring adapter inserts see chapter Accessories Fuse Devices 20

21 Slide Fuse Equipment, 3-pole Max. Max. Component Utilisation Designation Notes Units Rated Oper- Fuse-link Size Article No. per ational Current 500V 690V Package Ie (A) (A) (A) SG10006 NH-Fuse-Switch-Disconnector Incl. shock hazard protection at the top and bottom (except with GST AOU) Drill-free mounting NH x 5/10 LTS-100/C00/3-R Width 1 unit 30 x 5/ mm. Double-T Connection at the bottom. Lift terminal mm 2 SG NH00 20 x 5/10 GST AOU Connection 1 unit 25 x 5/ at the top 30 x 5/10 or bottom. Double-T Lift Terminal mm 2 No shock hazard For ordering information on shock hazard protection BS-SET-GST00 see Accessories protection. SG NH1 20 x 5/10 GST1-AO Connection 1 unit 25 x 5/ at the top. 30 x 5/10 Screw M10. Double-T GST1-AU Connection 1 unit at the bottom. Screw M10. SG NH2 20 x 5/10 GST2-AO Connection 1 unit 25 x 5/ at the top. 30 x 5/10 Screw M10 Double-T GST2-AU Connection 1 unit at the bottom. Screw M10. SG NH3 20 x 5/10 GST3-AO Connection 1 unit 25 x 5/ at the top. 30 x 5/10 Screw M10. Double-T GST3-AU Connection 1 unit at the bottom. Screw M10. Accessories for NH-Fuse-Switch-Disconnector SG10206 Shock Hazard Protection Set GST00 GST00... BS-SET-GST00 1 set 1 unit includes shock hazard protection at the top and bottom. For NH-fuse-links Z-NH... and solid-links Z-NH-../TR see chapter Accessories Fuse Devices. 21

22 s Slide Fuse Equipment, 3-pole Rated Oper- Component Utilisation Designation Notes Units ational Voltage Size Article No. per Package SG12906 Switch cover with Fuse Monitoring for NH-Fuse-Switch-Disconnector Operating indication 1 green LED Error indication 3 red LEDs (F1, F2, F3) Error indication via relay contacts (potential-free) 1 NO + 1 NC contact AC15: 24 V / 4 A, 230 V / 3 A AC13: 24 V / 1 A, 220 V / 0.5 A Terminal capacity: mm V / Hz 00 GST00... GST00-DSI 1 unit GST1... GST1-DSI 1 unit GST2... GST2-DSI 1 unit GST3... GST3-DSI 1 unit Terminal Capacity Utilisation Designation Notes Units Article No. per Package wa_vt00406 Set of Prism Terminals mm 2 GST1... PSK1 One set includes 1 unit prism terminals mm 2 GST2... PSK2 One set includes 1 unit prism terminals mm 2 GST3 PSK3 One set includes 1 unit prism terminals wa_vt00506 wa_vt00306 Set of Double-Prism Terminals 2x(70-95) mm 2 GST1... PSK12 One set includes 1 unit doubleprism terminals 2x( ) mm 2 GST2... PSK22 One set includes 1 unit doubleprism terminals 2x( ) mm 2 GST3 PSK32 One set includes 1 unit doubleprism terminals Clamp-Type Terminal mm 2 GST1... SK1-GS 3 units Cu-Band 6 x 16 x 0.8 mm mm 2 GST2... SK2-GS 3 units Cu-Band 10 x 16 x 0.8 mm mm 2 GST3 SK3-GS 3 units Cu-Band 11 x 21 x 1 mm

23 s Slide Fuse Equipment, 3-pole Max. Max. Component Utilisation Designation Notes Units Rated Oper- Fuse-link Size Article No. per ational Current 400V 690V Package Ie (A) (A) (A) SG00406 NH-Vertical Fuse-Switch-Disconnector Incl. cover for termination space Drill-free mounting Clamp straps included in the delivery Without fuse monitoring x 5/10 NH-SLS-00/ Connection 1 / x 5/ at the 25 x 5/10 top or 30 x 5/10 bottom Double-T With fuse monitoring x 5/10 NH-SLS-00/ SI Connection 1 / x 5/ at the 25 x 5/10 top or 30 x 5/10 bottom Double-T SG00606 Teminal Cover/Size Compensation for GST... For NH-SLS-00/ Z-NH-SLS-KA 2 units For NH-fuse-links Z-NH/00... and solid-links Z-NH-00/TR see chapter Accessories Fuse Devices Coordination Table Combinations possible without bending the copper busbar Device GST AOU LTS-100/C00/3-R D02-S/63/3-RS D02-LTS/63/3-R(-HK) D02-SO/63/3-R-27 DII-SO/25/3-R(-PS) DIII-SO/63/3-R(-PS) Z-D02/R/3-.. Accessory BS-SET-GST00 SBS-RS60 SBS-RS60 Cu 12x5/10 X X X X 20x5/10 X X X X X X X 25x5/10 X X X X X 30x5/10 X X X X X X X Double-T X X X X X X X 23

24 Max. Dimensions Cross Section Designation Notes Units Rated (Number of layers Article No. per Package Operational x width Current x thickness of layers) Ie (A) (mm) (mm 2 ) wa_vt04807 Multi-layer Copper Band, insulated E-Cu conductor, tin-plated Rated voltage 690 V AC UL-listed for max. 600 V AC Breakdown voltage 20 kv/mm Insulating material heat resistant up to +105 Celsius Self-extinguishing according to UL94VO 2000 mm long x 9 x CU-BAND3X9X0,8-BK black 20 units x 9 x CU-BAND3X9X0,8-BU blue 20 units x 9 x CU-BAND3X9X0,8-GNYE green/yellow 20 units x 9 x CU-BAND6X9X0,8-BK black 10 units x 9 x CU-BAND6X9X0,8-BU blue 10 units x 9 x CU-BAND6X9X0,8-GNYE green/yellow 10 units x 9 x CU-BAND9X9X0,8-BK black 10 units x 9 x CU-BAND9X9X0,8-BU blue 10 units x 9 x CU-BAND9X9X0,8-GNYE green/yellow 10 units x 16 x CU-BAND6X16X0,8-BK black 10 units x 16 x CU-BAND6X16X0,8-BU blue 10 units x 16 x CU-BAND6X16X0,8-GNYE green/yellow 10 units x 16 x CU-BAND10X16X0,8-BK black 5 units x 16 x CU-BAND10X16X0,8-BU blue 5 units x 16 x CU-BAND10X16X0,8-GNYE green/yellow 5 units x 24 x CU-BAND5X24X1-BK black 5 units x 21 x CU-BAND11X21X1-BK black 5 units x 21 x CU-BAND11X21X1-BU blue 5 units x 21 x CU-BAND11X21X1-GNYE green/yellow 5 units x 24 x CU-BAND8X24X1-BK black 5 units x 24 x CU-BAND10X24X1-BK black 5 units x 32 x CU-BAND5X32X1-BK black 5 units x 32 x CU-BAND10X32X1-BK black 3 units x 40 x CU-BAND10X40X1-BK black 3 units x 50 x CU-BAND10X50X1-BK black 2 units x 80 x CU-BAND10X80X1-BK black 1 unit

25 Used for Designation Notes Units Article No. per Package VT04808 Line supports (Short-circuit strength diagrams see Technical Datas) Profile ledge Clamp clips BZ units VT06008 Clamp clips 3 x 9 x 0.8 BZ units 6 x 9 x x 16 x 0.8 BZ units 6 x 16 x x 16 x x 21 x 1 BZ units