Accreditation from Quality Council of India for ITI s - User Manual

Transcription

1 Accreditation from Quality Council of India for ITI s - User Manual Version 1 September, NABET. All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of NABET.

2 The information contained in this manual is exclusively for the use only by the ITI s of different States of India. It must not be given to or used by any other person or organization without the express written permission of the NABET. No part of this manual may be reproduced in any form or by any means electronic, mechanical, photocopying, recording or otherwise for any purpose without the express permission of NABET. Every effort has been made to make available current information as far as possible. The examples and screens shown in this manual are done to explain the complete flow of the application. All amendments issued from time to time are deemed as incorporated within five working days from the day an amendment is issued. Users are encouraged to forward their suggestions for improving the content of the manual as well as the application so that we make all the efforts to improve the usability of the application.

3 PREFACE Purpose of This Document This user manual aims to familiarize you with tasks and processes that need to be carried out during the use of the application. The document contains the description of each screen of the application and its functionality Intended Audience This document intended for users of the NABET, State ITI process owners who are familiar with the basic tasks and terminology of the application. It will enable you to understand the details of the tasks/activities to be performed for the use of the online application.

4 Table of Contents 1 Introduction User and Password Creation New user creation Forgot Password Entry of institute details to create user name and password Main page with Documents to upload Grant of affiliation for new and existing ITI s For the grant of affiliation for new ITI s General Information of the Institute Organisation details Trades for which affiliation sought now Manpower - Non-technical and Technical staff Non-technical and Technical staff details Education qualification of Non-technical and Technical staff Education qualification of Non-technical and Technical staff Technical staff details instructor wise Educational qualification of technical staff instructor wise Experience of technical staff instructor wise Manpower-Administrative and Supportive staff Administrative and Supportive staff details Education qualifications of Administrative and Supportive staff Experience details of Administrative and Supportive staff Infrastructure of Institute Details of land and building of the institute Power Supply Tools, equipments and machineries Industry partnership Quality management system Declaration... 39

5 4.9 Report For the grant of affiliation for Existing ITI s General information of institute Organisation Details Cases Trades for which affiliation sought now Previously granted affiliated Trades Trade Shifting within premises Manpower - Non-technical and Technical staff Non-technical and Technical staff details Education qualification of Non-technical and Technical staff Education qualification of Non-technical and Technical staff Technical staff details instructor wise Educational qualification of technical staff instructor wise Experience of technical staff instructor wise Manpower-Administrative and Supportive staff Administrative and Supportive staff details Education qualifications of Administrative and Supportive staff Experience details of Administrative and Supportive staff Infrastructure of Institute Details of land and building of the institute Power Supply Tools, equipments and machineries Tools, equipments and machineries costing above Rs. 10,000/ Industry partnership Standard of Training Coverage of syllabus for each trade as on date of submission No. Of tests conducted for each trade as on date of submission No. Of trainees enrolled in each NCVT affiliated trade... 73

6 5.12 Total amount spent on raw material against each trade wise for the batch Average amount spent on raw materials trade per month per trainee of the batch No. of units of electricity consumed per month/trainee from the date of commencement of training classes Result of all India trade test Quality management system Declaration Report... 82

7 1 Introduction The purpose of this study is to collect information pertaining to the exisiting resources available with the ITIs. The study is not going to focus on performance of a particular ITI but it will enable the State Government to prepare its policy guidelines for providing adequate support and resources to the ITIs. The objective will be to create World Class Institutes with best benchmarks and to promote the Zeal for Excellence in the state. This will ensure that the graduates of the ITIs will not only be acceptable in domestic market but also in the International job markets. ITIs have to provide required details in the online application. The details of how to use the application is defined in this manual. This manual contains all the screen shots along with description of each form in the online application. The document also mentiones the basic requirment which needs to be in place so to access the application and enter the data.

8 Basic Requirement - The ITI should have internet connectivity and a computer which has IE or Google Chrome browser installed for accessing the application. The URL to be accessed and click on the Accreditation criteria for government and private industrial training institutes 2 User and Password Creation Browse the above site/url and on clicking the accreditation criteria for government and private industrial training institutes under notifications, a popup with PDF forms pertianing to the norms along with a link to fill the online application appears and in the same pop up drill down to 13 th point to click the link to view the loginpage. Click on Create New User Existing user can fill the online application by entering the their user name and password, In case a new user to enter or access the application for the first time, s/he has an option of creating the user name and password selecting the new user option.

9 2.1 New user creation Enter the requisite sub-district name Click the icon to view the pop up to enter the name * mark indicates mandatory feild. The user would provide the details against all the fields. In case User is not able to find the requisite district and sub-district in the respective dropdown lists, select the option provided adjacent to district and sub-district dropdowns to enter the requisite district and subdistrict/tehsil names and save the record as shown in the above screenshot. Please make sure to mention correct address. After saving the district and sub-district name, User has to select the saved name from the dropdown list. Select save option to save the entered details and a mail with the user ID and password will auto dispatches to saved -id and can access the application with immediate effect by entering the saved username and password. User would access the application to drill down further and provide the details to fill the complete application. The subsequent screens will appear only on entering the correct Username and Password.

10 2.3 Forgot Password Click on Forgot password User not able to provide correct details as entered during the user name creation, user has an option to click on forgot password. User must click on the forgot password option and pop up appears as shown in the above screenshot User would provide the User ID and password in the provided field to login the application. The subsequent screens will appear only on entering the correct Username and Password. Provide the correct Details User has to select the same question and enter the same answer as saved during the user name creation to access the application. The password is retrieved and displays the same, a mail with user ID and password will be dispatched to the provided ID.

11 2.4 Entry of institute details to create user name and password User enters the requisite details in the provided fields to get the username. Selects save option to view the user name and system generates username and unique to the particular ITI. User would enter the generated username and password as saved then select log in option to access the further application.

12 2.5 Main page with Documents to upload User logs in into application and view the main page. The main page contains details of the documents to be uploaded for new and existing institute for affiliation. User has to go through the provide information then accordingly has to provide the details to complete application form. Select next option after thorough check of the details to provide.

13 3. Grant of affiliation for new and existing ITI s User would select the option of new and existing industrial training centre based on select the application runs through the requisite pages. For the new institute, user would select new industrial training institute option to access the requisite forms for new establishment. Whereas for existing institutes user would select existing industrial training institute option to access the forms of existing institute. Select save option to save the selection as record and further access of the requisite forms. Click next option to access the general information form page as per selection.

14 4. For the grant of affiliation for new ITI s General Information of the Institute Please select special status if any as mentioned in DDL Special location like J&K and northeast states Select option to confirm the centre of excellence status in any trade Select option to confirm the institute belongs to trust/society The new user would enter the details of general information about ITI institute. Few fields data by default would appear in the provided fields from the user creation form. Rest of the fields to be filled as required. Details of Specail status, special location should be filled by eligible insttitutes. Special location details would be filled by the institue of Jummu & kashmir and North east states of India. Incase of institute having center of excellence status would select yes option from dropdown list otherwise no option is selected.

15 Institute is run by trust/ society user would select yes option and would provided other details as requested. Select save option after entering the requiste details to save the record. Click next option to access the organisation details form Organisation details Enter the other institute name under same organisation if exists Upload the document of trust/society only if the option is enabled The user would provide details of organization to which the ITI institute belongs. If the institute belongs to trust/society as saved under general information, user has to provide the legal document of the trust/society deed. If there are multiple institutes under the organization, please mention the institute name, its address, DGET reference no., trades affiliation with and no. of units under each trade & total students under each trade. User has to provide details by institute name and trade wise. Enter the details of institute name, address, DGET reference file no., trade names, units and students in the fields then select add option to add the entered details in the grid. To edit the

16 saved details double click on the required trade name in the grid, all the details would displayed in the above fields and edit saved details. Select save option after entering the requisite details in the fields to save the record and then click on next option to access the details of court cases filed by the institute page. Select back option to access the general information form. To select the required file To upload the selected file Click show option to view the uploaded file Click to delete the uploaded file User would upload the legal documents of trust/society deed by clicking on upload/ show file option and select the document by clicking the choose file option and then uploads the selected file by clicking upload all option. Uploaded file name is displays. Click show option to view the details in the attached file and delete option to delete the saved file. User can upload multiple files as required in the same process as mentioned.

17 4.2 Trades for which affiliation sought now Enter the first few letters of the trade and the list of trades starting with these letters would appear and select the required trade User would enter the requisite new trades sought for affiliation. User would select requisite trade from the trade s field. User has to enter the first few letters of the trade sought for then the trades starting with that letters would displayed then select the requisite trade. Select required no. of units shift wise and enter requisite no. in the fields then select the month and year to start the session of the course. Select save option to save the record in the grid. To edit the saved record double click on required trade from the grid. The details would be displayed in the above fields then edit the details in the required fields. Select save option to save the edited details. Select delete option to delete the record. Continue the same process for all the requisite trades and then click on close option to access the technical staff details as per NCVT norms with actual staff.

18 4.3 Manpower - Non-technical and Technical staff Actual no. of posts is less then no. of posts as per NCVT norms is displayed in colour code User would enter actual no. of post against the no. of post as per NCVT norms of technical staff. No. of post as per NCVT norms are displayed and user would enter the details of actual staff in the field provided against the designation. In case the actual staff post no. is less then no. of post as per NCVT norms, the field against that particular designation would displayed in colour code to differentiate the inadequacy. Select save option to save the entered details. Select next option to access Manpower technical staff page.

19 4.3.1 Non-technical and Technical staff details For other designations apart from NCVT norms would click on other option to enter and save the record. Once the file is uploaded the view option colour code, changes, it indicates file uploaded Click choose file option to the select the required file Use would enter the details of Manpower technical staff, user select the staff from designation dropdown list as per the NCVT norms. Institutes having designations other than saved in dropdown list as per NCVT norms, user would select others option and enter the designation name and saves it. Select the designation as required from dropdown list then enter the name of the person and other details as per fields. To upload the voter ID card, photograph and resume click the respective choose file options to choose the required file and select upload option to upload and save the file. Click view option to view the upload file against respective uploads. Any upload done, the view option would display in colour code. Select save option to save the entered details as record. To edit the saved record double click on required designation in the grid and the details would displayed in the respective fields and edit the required fields and then click save option to save the edited record. Select delete option to delete the saved record. Click next option to access Education qualifications details of technical staff page and back option to access technical staff posts as per NCVT norms and actual staff present page.

20 4.3.2 Education qualification of Non-technical and Technical staff User would enter the education qualification details of saved technical staff. Select the saved designation from the dropdown list then the name, qualification from respective dropdown lists. Enter the certificate no. and year of passing details against the selected designation, name and qualification. Clicks choose file option to select the file to upload and then click the upload option to save the file. Select the view option to view the details. View option s colour code changes once the file is uploading. Select save option to save the enter details as record in the grid. To edit the saved record double click on the required qualification of the staff then the details would displayed in the respective fields to edit the details. Click the save option to save the edited details of the record. Select delete option to delete the record. Select next option to access the technical staff experience details and back option to access the technical staff details.

21 4.3.3 Education qualification of Non-technical and Technical staff User can view the attachment made during entry of the education qualification details User would enter the details of technical staff. Select the designation, name of the person and higher educational qualification from the dropdown list and then enter the details of certificate no., year of passing, previous organization name, total years of experience, salary, bank name, branch name and account no. Click save option to save the entered details in the grid. To edit the saved details double click on the required designation in the grid, the saved details displayed in the fields above the grid. Edit the required field details then select save option to save the edited record. Select delete option to delete the saved record. During the selection of the trade, instructor and higher educational qualification and entering other details, user could view the saved higher education qualification certificate uploaded in the educational qualification page, as it is indicate in colour code at the time of details entry. Experience less than approved norms of NCVT, it is indicated in colour code. Click next option to access the Manpower technical staff instructors page and back option to access education qualification of technical staff page.

22 4.3.4 Technical staff details instructor wise Click on the required designation to edit the saved details in the fields above the grid. User would enter the details of the technical staff instructor trade wise. Select the trade name and designation from the respective dropdown lists then enters the name of the person and other details as per the fields. Clicks choose file option to select the required file to upload and then click on upload option to upload the file. Click view option to view the attached file and View option s colour code changes once the file is upload. Select save option to save the enter details as record in the grid. To edit the saved record double click on the required designation then the details would displayed in the respective fields to edit the details. Click the save option to save the edited details of the record. Select delete option to delete the record. Select next option to access the technical staff instructor s education qualifications details page and back option to access the technical staff education qualifications details page.

23 4.3.5 Educational qualification of technical staff instructor wise Click on the required qualification to edit the details in the fields above the grid User would enter the education qualification details of saved technical staff instructors trade wise. Select the saved designation from the dropdown list then the name, qualification from respective dropdown lists. Enter the certificate no. and year of passing details against the selected designation, name and qualification. Clicks choose file option to select the file to upload and then click the upload option to save the file. Select the view option to view the details. View option s colour code changes as the file is uploaded. Select save option to save the enter details as record in the grid. To edit the saved record double click on the required qualification of the staff then the details would displayed in the respective fields to edit the details. Click the save option to save the edited details of the record. Select delete option to delete the record. Select next option to access the technical staff experience details and back option to access the technical staff details.

24 4.3.7 Experience of technical staff instructor wise Click on the required trade to edit the saved details in the fields above the grid. User would enter the details of technical staff instructors trade wise. Select the trade name, instructor type, name of the person and higher educational qualification from the dropdown list and then enter the details of certificate no., year of passing, previous organization name, total years of experience, salary, bank name, branch name and account no. Click save option to save the entered details in the grid. To edit the saved details double click on the required designation in the grid, the saved details displayed in the fields above the grid. Edit the required field details then select save option to save the edited record. Select delete option to delete the saved record. During the selection of the trade, instructor and higher educational qualification and entering other details, user could view the saved higher education qualification certificate uploaded in the educational qualification page, as it is indicate in colour code at the time of details entry. Experience less than approved norms of NCVT, it is indicated in colour code. Select next option to access the technical staff experience details and back option to access the technical staff details.

25 4.3.8 Manpower-Administrative and Supportive staff User would enter actual no. of post against the no. of post as per NCVT norms of technical staff. No. of post as per NCVT norms are displayed and user would enter the details of actual staff in the field provided against the designation. In case the actual staff post no. is less then no. of post as per NCVT norms, the field against that particular designation would displayed in colour code to differentiate the inadequacy. Select save option to save the entered details. Select next option to access Manpower administrative and supportive staff details page and back option to access technical staff- instructors experience page. Actual No. of posts less than approved norms of NCVT, it is indicated in colour code.

26 4.3.9 Administrative and Supportive staff details User would enter the details of the administrative and supportive staff. Select the staff type and designation from the respective dropdown lists then enters the name of the person and other details as per the fields. Clicks choose file option to select the required file to upload and then click on upload option to upload the file. Click view option to view the attached file and View option s colour code changes once the file is upload. Select save option to save the enter details as record in the grid. To edit the saved record double click on the required designation then the details would displayed in the respective fields to edit the details. Click the save option to save the edited details of the record. Select delete option to delete the record. Click next option to access Education qualifications details of administrative and supportive staff page and back option to access administrative and supportive staff posts as per NCVT norms and actual staff present page.

27 Education qualifications of Administrative and Supportive staff User would enter the education qualification details of saved administrative and supportive staff. Select the saved staff type, designation, name of the person, qualification from respective dropdown lists. Enter the certificate no. and year of passing details against the selected designation, name and qualification. Clicks choose file option to select the file to upload and then click the upload option to save the file. Select the view option to view the details. View option s colour code changes as the file is uploaded. Select save option to save the enter details as record in the grid. To edit the saved record double click on the required qualification of the staff then the details would displayed in the respective fields to edit the details. Click the save option to save the edited details of the record. Select delete option to delete the record. Select next option to access the technical staff experience details and back option to access the technical staff details.

28 Experience details of Administrative and Supportive staff Click on the required designation to edit the saved details in the fields above the grid. User would enter the details of technical staff instructors trade wise. Select the trade name, instructor type, name of the person and higher educational qualification from the dropdown list and then enter the details of certificate no., year of passing, previous organization name, total years of experience, salary, bank name, branch name and account no. Click save option to save the entered details in the grid. To edit the saved details double click on the required designation in the grid, the saved details displayed in the fields above the grid. Edit the required field details then select save option to save the edited record. Select delete option to delete the saved record. During the selection of the trade, instructor and higher educational qualification and entering other details, user could view the saved higher education qualification certificate uploaded in the educational qualification page, as it is indicate in colour code at the time of details entry. Select next option to access the land building details of the institute and back option to access the administrative and supportive experience staff details.

29 4.4 Infrastructure of Institute Details of land and building of the institute Date of expiry of the lease agreement If the proposed building is on rent, the user has to mention years of lease and upload the relevant documents Site plan in No. and upload the same site plans as documents User would provide details of land and building measurement in actual and as per NCVT norms in the fields provided. User enters area details as per the fields as the total build up area as per NCVT norms then enters the actual built up area for accommodation and the total land available for institute. User would enter the ownership details of the building along with documentary proof. First enter the building type details from the dropdown and attaches upload file, enter the date of occupation. In case of lease, user would enter the lease documents as attachment and mentions no. of years of lease and expiry date of agreement in the provided fields. Apart from the providing the above details, user have to provide the no. of relevant site plan institute is having and upload the site map as required. Along with the site maps, the user should enter the name of architecture along with registration no. in the provided fields and upload relevant document. Select save option to save the enter details. Click next option access the other details of the land and building of the institute.

30 User would enter the other details pertain to land and building. User would enter the details of no. of floors, if more than 3 floors mentioned then user have to provide details of lift any exists. Upload photographs of front view of the building, each classroom and workshops and other details in the respective fields. Select save option to save the record of entered details. Click next option to access the office building details.

31 User would provide the total no. of systems required in all workshops as per the norms as mentioned User would provide the total no. of systems physically present in all the workshops User would enter the details of office requirements as per the provided fields. User would enter the details as per both the norms and actual available area. For IT Lab the NCVT norms is minimum 10 systems/ workstation and For each additional unit accredited/ affiliated, two computers / workstation must be added. Select save option to save the entered details. Click next option to access area available in the institute for workshops and classrooms.

32 User would enter the details of area available for workshops and classrooms in the institute. Selects the trade name and enters maximum no. of units and other details in the respective fields. Select save option to save the entered details. Select delete option to delete the saved record. Click the next option to access the power supply details and back option to access the office building details. Workshop area less than approved norms of NCVT, it is indicated in colour code.

33 4.4.2 Power Supply User would enter the details of powersupply. Enter the name under which connectioned issued and other details as per the fields. Meter seal no document to be uploaded. If diesel generator available user would select available option and enter further details otherwise selects unavailable. Select save option to save the entered details as record. Click the next option to access the power supply details for new trades page and back option to access the workshop and classroom area details page.

34 By default maximum no of units are displayed and user has to confirm the same otherwise has to make relevant change in no. of units in the affiliation sought for page User would enter the details of power supply required each new trade. The no. of units against the selected trade displayed as per the selection of units in the affiliation sought for page. User has to just the retrieved details are correct. Select save option to save the record. Select close option to access tools, equipments and machineries page and back option to access the power supply details of institute.

35 4.5 Tools, equipments and machineries Actual no. of total tools is less then no. of total tools as per NCVT norms is displayed in colour code. User would enter the details of tools, equipments and machineries as required and physically available in the centre. Select the trade and tools from the respective dropdown list, the shift wise units and tools as per norms of NCVT display by default, user of new institutes seeking for affiliation have to enter tools in the field against tools for which affiliation sought for and enter the total cost of tool. Physical availability of the tools is less than NCVT norms would indicate in colour code. Select save option to save the entered details as record and delete option to delete the saved record. Click next option to access tools, equipments and machineries costing above Rs. 10,000 page. Total no. of individual tool/item less than approved norms of NCVT, it is indicated in colour code.

36 User would enter the details pertains to purchase made of item/tool more than Rs. 10,000/-. Select the trade and tools and equipments from respective dropdown list then enter the make and year of manufacture of the tool/equipment, vendor name, bill no., bill date, tin no., vat no. and identification no. punched details of the tool/item. Items/tools having cost price more than Rs.10, 000/- only will appear in the dropdown list. Bill details and photograph of tool with principal to be upload respectively. Select save option to save the entered details and to edit the saved details double click the required tool name details are displays in the above fields and edit the saved details. Select save option to save the edited record against the required tools. Click the next option to access the industry partnership page and back option to tools, equipments and machineries page.

37 4.6 Industry partnership User would enter the industry interface details for various trades. Enter the details of industry name and partnership type with the industry and uploads the documents of partnership if any. Select the add option to save the entered industry partnership details. Click close option to access the instructor-training page and closes the industry partnership page and back option to access tools, equipments and machinery costing above Rs 10,000/- page.

38 4.7 Quality management system Upload the quality management manual User would upload quality management manual and select yes option against all the points whichever institute is in compliance. Select save option to save the enter details as record. Click close option to access Declaration form and back option to access industry partnership.

39 4.8 Declaration User clicks on declaration from, a pop with the all the forms would be displayed as shown in the above screenshot. User has to click on the form name where the data is not filled implies and to access the particular form page and enter the details in that particular form. User has to save the details in the same form. Select the declaration form again to access the popup to enter the details in another form. User can access directly relevant form and enter the details. User has to enter the details in all the forms and make sure all forms have details to be furnished. Then the pop up would not appear user can enter other details in the declaration form.

40 User would enter the details of the payment made through demand draft/cheque (Delhi only) with cheque no., amount and date of the cheque to deposit. In case if the user would like to make the payment online, clicks on the link option For online payment, please click here. User would enter the name of the responsible person and designation, the name of the institute and date would by default displays in the provided fields. Before submission of application, select print declaration option to take the print of the declaration form and signs the declaration form. Click the upload option to upload the scanned signed declaration form as document. Select show report option to view and check the correctness of all the entered details in a report format. Clicks submit option to save the entered application and submit for assessment.

41 User can make payment through online banking. The accounts details furnished in the pop up.

42 4.9 Report User would able to view the all the entered details in the report format. Before submission user can go through all the entered details and can make rectification as desired. Once the user submits the application cannot make any changes.

43 5 For the grant of affiliation for Existing ITI s 5.1 General information of institute Select yes option to enter registry details Select Yes option to enter ownership details User would access the general information form to enter the general details. Enters the details as per the fields and then saves the record. Enter the details in the mandatory fields to save the record. On the left pane of the screen, one can see list of forms. These forms will appear in a set order in the right pane of the screen and user has to enter the details accordingly. Many forms may have more than one page to fill select next option to access the next page and select close option to close the particular form at the last page of particular form. User has to provide the details of ownership, select No option if the institute does not belong to trust/society and save the record, as subsequent fields will be in read only format. In case institute belongs to trust/society the user has to select yes option then should provided the details of registry of the trust/society. If the trust/society is registered, select yes option and enter year of registration and its validity in the subsequent fields otherwise select No option then save the record as subsequent fields will be read only format Select save option to save the record and then select next option to access the Organizational details form.

44 5.1.2 Organisation Details Enter the requisite district name Select to upload file and view the attachment Select save option to save the enter district name Click the name of institute to view and edit the details Saved details of associated ITIs under same organization User would enter the organizational details in the provided fields. User has to enter all requisite details, in case user not able to select the requisite district and tehsil from dropdown list. User can select the option provided adjacent to both district and tehsil fields to enter the required district and tehsil in the popup as shown in the screenshot. Select save option to save the entered details in the pop up, then select the saved district and tehsil from the dropdown list. User has to provide the legal document pertain to registry of trust/society as opted in the general information page. Select the upload/show file option to upload and view the saved document. Lastly, user has to enter the details of any other ITI institute affiliated under the same group. Select yes option to enter further details like name of the institute, address, trades affiliated, DGET reference no. & date, no. of units and no. of students. Select add option to save the entered details in the provided grid. Select name of institute in the grid to edit the saved details. Save the details for all the associated ITI institutes under the same organization. Select save option to save the entered details and then select next option to access the next page of General Information form. Select back option to access the general information page.

45 5.1.3 Cases Provide details only if there are cases present against the selection otherwise simply save and close the page User has to enter the details pertains to court cases filed against DGE&T, NCVT, DGE&T officials and NABET officials. Select from dropdown list cases filed against then enter the case no. & court name in the provided field and select the status of the case. Select save option to save the record, saved details appears in the provided grid. Select back option to access the organization detail page and select close option to close the general information form and to access the Affiliation sought for form.

46 5.2 Trades for which affiliation sought now User would enter the requisite new trades sought now for affiliation. User would select requisite trade from the trade s field. User has to enter the first few letters of the trade sought for then the trades starting with that letters would displayed then select the requisite trade. Select required no. of units shift wise and enter requisite no. in the fields then select the month and year to start the session of the course. Select save option to save the record in the grid. To edit the saved record double click on required trade from the grid. The details would be displayed in the above fields then edit the details in the required fields. Select save option to save the edited details. Select delete option to delete the saved record. Click next option to access the previously granted affiliation in any trade page.

47 5.2.1 Previously granted affiliated Trades User would enter the affiliated trade details. User would enter first few letters of affiliated trade and then select the required trade name from the list of trades displayed starting with enter letters in the trade s field. Enter affiliated no. of units shift wise then select the month and year to start the session of the course. Select save option to save the record in the grid. To edit the saved record double click on required trade from the grid. The details would be displayed in the above fields then edit the details in the required fields. Select save option to save the edited details. Select delete option to delete the saved record. Continue the same process for all the affiliated trades and then click on close option to access the technical staff details as per NCVT norms with actual staff.

48 5.2.3 Trade Shifting within premises User would enter the details of shifting of trades and its units within the institute premises. Any shift in the trade and in its units user select the option yes to enter further details otherwise with the selection of option no all fields will be in read only format. User cannot enter any details User selects yes option to enter further details of trade being surrendered with its no. of units and the trade being opened with its unit s details would be entered. Select save option to save the entered details as record. Click the name of trade being surrendered to edit the saved details. Select save option after editing the details in required fields above the grid to save as record. Click close option to close the affiliation of trades details and to access the manpower details.

49 5.3 Manpower - Non-technical and Technical staff User would enter actual no. of post against the no. of post as per NCVT norms of technical staff. No. of post as per NCVT norms are displayed and user would enter the details of actual staff in the field provided against the designation. In case the actual staff post no. is less then no. of post as per NCVT norms, the field against that particular designation would displayed in colour code to differentiate the inadequacy. Select save option to save the entered details. Select next option to access Manpower technical staff page.

50 5.3.1 Non-technical and Technical staff details For other designations apart from NCVT norms would click on other option to enter and save the record Once the file is uploaded the view option colour code, changes, it indicates file uploaded Click choose file option to the select the required file Use would enter the details of Manpower technical staff, user select the staff from designation dropdown list as per the NCVT norms. Institutes having designations other than saved in dropdown list as per NCVT norms, user would select others option and enter the designation name and saves it. Select the designation as required from dropdown list then enter the name of the person and other details as per fields. To upload the voter ID card, photograph and resume click the respective choose file options to choose the required file and select upload option to upload and save the file. Click view option to view the upload file against respective uploads. Any upload done, the view option would display in colour code. Select save option to save the entered details as record. To edit the saved record double click on required designation in the grid and the details would displayed in the respective fields and edit the required fields and then click save option to save the edited record. Select delete option to delete the saved record. Click next option to access Education qualifications details of technical staff page and back option to access technical staff posts as per NCVT norms and actual staff present page.

51 5.3.2 Education qualification of Non-technical and Technical staff User would enter the education qualification details of saved technical staff. Select the saved designation from the dropdown list then the name, qualification from respective dropdown lists. Enter the certificate no. and year of passing details against the selected designation, name and qualification. Clicks choose file option to select the file to upload and then click the upload option to save the file. Select the view option to view the details. View option s colour code changes once the file is uploading. Select save option to save the enter details as record in the grid. To edit the saved record double click on the required qualification of the staff then the details would displayed in the respective fields to edit the details. Click the save option to save the edited details of the record. Select delete option to delete the record. Select next option to access the technical staff experience details and back option to access the technical staff details.

52 5.3.3 Education qualification of Non-technical and Technical staff User can view the attachment made during entry of the education qualification details User would enter the details of technical staff. Select the designation, name of the person and higher educational qualification from the dropdown list and then enter the details of certificate no., year of passing, previous organization name, total years of experience, salary, bank name, branch name and account no. Click save option to save the entered details in the grid. To edit the saved details double click on the required designation in the grid, the saved details displayed in the fields above the grid. Edit the required field details then select save option to save the edited record. Select delete option to delete the saved record. During the selection of the trade, instructor and higher educational qualification and entering other details, user could view the saved higher education qualification certificate uploaded in the educational qualification page, as it is indicate in colour code at the time of details entry. Experience less than approved norms of NCVT, it is indicated in colour code. Click next option to access the Manpower technical staff instructors page and back option to access education qualification of technical staff page.

53 5.3.4 Technical staff details instructor wise Click on the required designation to edit the saved details in the fields above the grid. User would enter the details of the technical staff instructor trade wise. Select the trade name and designation from the respective dropdown lists then enters the name of the person and other details as per the fields. Clicks choose file option to select the required file to upload and then click on upload option to upload the file. Click view option to view the attached file and View option s colour code changes once the file is upload. Select save option to save the enter details as record in the grid. To edit the saved record double click on the required designation then the details would displayed in the respective fields to edit the details. Click the save option to save the edited details of the record. Select delete option to delete the record. Select next option to access the technical staff instructor s education qualifications details page and back option to access the technical staff education qualifications details page.

54 5.3.5 Educational qualification of technical staff instructor wise Click on the required qualification to edit the details in the fields above the grid User would enter the education qualification details of saved technical staff instructors trade wise. Select the saved designation from the dropdown list then the name, qualification from respective dropdown lists. Enter the certificate no. and year of passing details against the selected designation, name and qualification. Clicks choose file option to select the file to upload and then click the upload option to save the file. Select the view option to view the details. View option s colour code changes as the file is uploaded. Select save option to save the enter details as record in the grid. To edit the saved record double click on the required qualification of the staff then the details would displayed in the respective fields to edit the details. Click the save option to save the edited details of the record. Select delete option to delete the record. Select next option to access the technical staff experience details and back option to access the technical staff details.

55 5.3.7 Experience of technical staff instructor wise Click on the required trade to edit the saved details in the fields above the grid. User would enter the details of technical staff instructors trade wise. Select the trade name, instructor type, name of the person and higher educational qualification from the dropdown list and then enter the details of certificate no., year of passing, previous organization name, total years of experience, salary, bank name, branch name and account no. Click save option to save the entered details in the grid. To edit the saved details double click on the required designation in the grid, the saved details displayed in the fields above the grid. Edit the required field details then select save option to save the edited record. Select delete option to delete the saved record. During the selection of the trade, instructor and higher educational qualification and entering other details, user could view the saved higher education qualification certificate uploaded in the educational qualification page, as it is indicate in colour code at the time of details entry. Experience less than approved norms of NCVT, it is indicated in colour code. Select next option to access the technical staff experience details and back option to access the technical staff details.

56 5.3.8 Manpower-Administrative and Supportive staff User would enter actual no. of post against the no. of post as per NCVT norms of technical staff. No. of post as per NCVT norms are displayed and user would enter the details of actual staff in the field provided against the designation. In case the actual staff post no. is less then no. of post as per NCVT norms, the field against that particular designation would displayed in colour code to differentiate the inadequacy. Select save option to save the entered details. Select next option to access Manpower administrative and supportive staff details page and back option to access technical staff- instructors experience page. Actual No. of posts less than approved norms of NCVT, it is indicated in colour code.

57 5.3.9 Administrative and Supportive staff details User would enter the details of the administrative and supportive staff. Select the staff type and designation from the respective dropdown lists then enters the name of the person and other details as per the fields. Clicks choose file option to select the required file to upload and then click on upload option to upload the file. Click view option to view the attached file and View option s colour code changes once the file is upload. Select save option to save the enter details as record in the grid. To edit the saved record double click on the required designation then the details would displayed in the respective fields to edit the details. Click the save option to save the edited details of the record. Select delete option to delete the record. Click next option to access Education qualifications details of administrative and supportive staff page and back option to access administrative and supportive staff posts as per NCVT norms and actual staff present page.

58 Education qualifications of Administrative and Supportive staff User would enter the education qualification details of saved administrative and supportive staff. Select the saved staff type, designation, name of the person, qualification from respective dropdown lists. Enter the certificate no. and year of passing details against the selected designation, name and qualification. Clicks choose file option to select the file to upload and then click the upload option to save the file. Select the view option to view the details. View option s colour code changes as the file is uploaded. Select save option to save the enter details as record in the grid. To edit the saved record double click on the required qualification of the staff then the details would displayed in the respective fields to edit the details. Click the save option to save the edited details of the record. Select delete option to delete the record. Select next option to access the technical staff experience details and back option to access the technical staff details.

59 Experience details of Administrative and Supportive staff Click on the required designation to edit the saved details in the fields above the grid. User would enter the details of technical staff instructors trade wise. Select the trade name, instructor type, name of the person and higher educational qualification from the dropdown list and then enter the details of certificate no., year of passing, previous organization name, total years of experience, salary, bank name, branch name and account no. Click save option to save the entered details in the grid. To edit the saved details double click on the required designation in the grid, the saved details displayed in the fields above the grid. Edit the required field details then select save option to save the edited record. Select delete option to delete the saved record. During the selection of the trade, instructor and higher educational qualification and entering other details, user could view the saved higher education qualification certificate uploaded in the educational qualification page, as it is indicate in colour code at the time of details entry. Select next option to access the land building details of the institute and back option to access the administrative and supportive experience staff details.

60 5.4 Infrastructure of Institute Details of land and building of the institute Date of expiry of the lease agreement If the proposed building is on rent, the user has to mention years of lease and upload the relevant documents Site plan in No. and upload the same site plans as documents User would provide details of land and building measurement in actual and as per NCVT norms in the fields provided. User enters area details as per the fields as the total build up area as per NCVT norms then enters the actual built up area for accommodation and the total land available for institute. User would enter the ownership details of the building along with documentary proof. First enter the building type details from the dropdown and attaches upload file, enter the date of occupation. In case of lease, user would enter the lease documents as attachment and mentions no. of years of lease and expiry date of agreement in the provided fields. Apart from the providing the above details, user have to provide the no. of relevant site plan institute is having and upload the site map as required. Along with the site maps, the user should enter the name of architecture along with registration no. in the provided fields and upload relevant document. Select save option to save the enter details. Click next option access the other details of the land and building of the institute.

61 User would enter the other details pertain to land and building. User would enter the details of no. of floors, if more than 3 floors mentioned then user have to provide details of lift any exists. Upload photographs of front view of the building, each classroom and workshops and other details in the respective fields. Select save option to save the record of entered details. Click next option to access the office building details.

62 User would provide the total no. of systems required in all workshops as per the norms as mentioned User would provide the total no. of systems physically present in all the workshops User would enter the details of office requirements as per the provided fields. User would enter the details as per both the norms and actual available area. For IT Lab the NCVT norms is minimum 10 systems/ workstation and For each additional unit accredited/ affiliated, two computers / workstation must be added. Select save option to save the entered details. Click next option to access area available in the institute for workshops and classrooms.

63 User would enter the details of area available for workshops and classrooms in the institute. Selects the trade name and enters maximum no. of units and other details in the respective fields. Select save option to save the entered details. Select delete option to delete the saved record. Click the next option to access the power supply details and back option to access the office building details. Workshop area less than approved norms of NCVT, it is indicated in colour code.

64 5.4.2 Power Supply User would enter the details of powersupply. Enter the name under which connectioned issued and other details as per the fields. Meter seal no document to be uploaded. If diesel generator available user would select available option and enter further details otherwise selects unavailable. Select save option to save the entered details as record. Click the next option to access the power supply details for new trades page and back option to access the workshop and classroom area details page.

65 By default maximum no of units are displayed and user has to confirm the same otherwise has to make relevant change in no. of units in the affiliation sought for page User would enter the details of power supply required each new trade. The no. of units against the selected trade displayed as per the selection of units in the affiliation sought for page. User has to just the retrieved details are correct. Select save option to save the record. Select close option to access tools, equipments and machineries page and back option to access the power supply details of institute.

66 5.5 Tools, equipments and machineries Actual no. of total tools is less then no. of total tools as per NCVT norms is displayed in colour code. User would enter the details of tools, equipments and machineries as required and physically available in the centre. Select the trade and tools from the respective dropdown list, the shift wise units and tools as per norms of NCVT display by default, user of new institutes seeking for affiliation have to enter tools in the field against tools for which affiliation sought for and enter the total cost of tool. Physical availability of the tools is less than NCVT norms would indicate in colour code. Select save option to save the entered details as record and delete option to delete the saved record. Click next option to access tools, equipments and machineries costing above Rs. 10,000 page. Total no. of individual tool/item less than approved norms of NCVT, it is indicated in colour code.

67 5.5.1 Tools, equipments and machineries costing above Rs. 10,000/- Click the required tool name to edit the save details User would enter the details pertains to purchase made of item/tool more than Rs. 10,000/-. Select the trade and tools and equipments from respective dropdown list then enter the make and year of manufacture of the tool/equipment, vendor name, bill no., bill date, tin no., vat no. and identification no. punched details of the tool/item. Items/tools having cost price more than Rs.10, 000/- only will appear in the dropdown list. Bill details and photograph of tool with principal to be upload respectively. Select save option to save the entered details and to edit the saved details double click the required tool name details are displays in the above fields and edit the saved details. Select save option to save the edited record against the required tools. Click the next option to access the industry partnership page and back option to tools, equipments and machineries page.

68 5.6 Industry partnership Click the required name of industry to edit the save details User would enter the industry interface details for various trades. Enter the details of industry name and partnership type with the industry and uploads the documents of partnership if any. Select the add option to save the entered industry partnership details. Click on required name of industry to edit the saved details and click on add option to save the edited details. Click close option to access the instructor-training page and closes the industry partnership page and back option to access tools, equipments and machinery costing above Rs 10,000/- page.

69 5.7 Standard of Training User would enter the details starting of a session, advertisement/ notice issued against the commencement of courses, last date of receipt of application as per the notice, No. of application received details, admission criteria, date by which admissions were completed and classes started in the respective fields. User has to upload the criteria for admission of trainees, copy of prospectus and CCE (continuous and comprehensive evaluation evidence) to be uploaded. Select upload option against each parameter. Select save option to save the entered details as record. User can update the details in any field and clicks save option to update. Click next option to access the trade wise no. of trainees enrolled page and back option to access industry partnership page.

70 User would provide the details of no. Of students/trainees enrolled against each affiliated courses. Select save option to save the entered details against each trade. Any update can be done in any field and then click the save option to save the update. Click next option to access coverage of syllabus for each trade as on date of submission page and back option to access standard of training admission page.

71 5.8 Coverage of syllabus for each trade as on date of submission User has to fill the data in respective fields User would enter the details of syllabus covered against the select trade from the dropdown of affiliated trades. User has to enter the details in the fields provided based on the duration of course. In case of mechanic (motor vehicle) trade, course duration is 2 years and entry should in the fields of 2 years. System will not allow entering in other fields other than in the appropriate fields. Select save option to save the entered details in the appropriate fields. Any update can be done in any field and then click the save option to save the update. Click next option to access no. of tests conducted for each trade as on date of submission and back option to access standard of training enrolment against each trade page.

72 5.10 No. Of tests conducted for each trade as on date of submission User has to fill the data in respective fields User has to enter the details of no. of tests conducted for each trade till the date of submission. User has to enter the details in the fields provided based on the duration of course. In case of mechanic (motor vehicle) trade, course duration is 2 years and entry should in the fields of 2 years. System will not allow entering in other fields other than in the appropriate fields. Select save option to save the entered details in the appropriate fields. Any update can be done in any field and then click the save option to save the update. Click next option to access no. of trainees enrolled in each NCVT affiliated trade page and back option to access the coverage of syllabus for each trade as on date of submission page.

73 5.11 No. Of trainees enrolled in each NCVT affiliated trade User has to enter the details of no. of trainees enrolled in each trade. Progress card one student/trainee must upload then enter the details of trainees enrolled in unit wise in shifts and no. of trainees in each shift against the affiliated trades. Select save option to save the entered details in the appropriate fields. Any update can be done in any field and then click the save option to save the update. Click next option to access Total amount spent on raw material against each trade wise for the batch page and back option to access no. of tests conducted for each trade as on date of submission page.

74 5.12 Total amount spent on raw material against each trade wise for the batch Click on the required raw material to edit the saved record Upload VAT and ST letters of supplier Upload bill receipt with details of the materials furnished User has to enter the details of total amount spent on raw materials purchased trade wise for the batch undergoing training. Select the required trade from dropdown list then enter the raw material purchased with quantity, supplier name, supplier address, supplier telephone no., and other details in the respective fields. User has to upload the supplier details with VAT and ST numbers in a single upload. All the raw materials purchased for the selected trade has to upload the bill no. with other details in bill receipt. All the materials entered should be available in the uploaded bill receipt. User has to enter the details bill wise against the selected trade. Multiple bills are available against trade then same no. of times has to enter the details and save accordingly. Click on save option to save the entered details. Click on required raw material in the grid to edit the saved details against the raw material. Select delete option against the save raw material to delete the saved record.

75 Click next option to access Average amount spent on raw materials trade per month per trainee of the batch page and back option to access no. of trainees enrolled in each NCVT affiliated trade page Average amount spent on raw materials trade per month per trainee of the batch User has to enter the details of average amount spent on raw materials trade wise per month per trainee. Select the trade name from the dropdown list of affiliated trades then enter the amount spent, no. of trainees and system will calculate average per trainee. Select save option to save the entered details as record. Click on the required trade name to edit the saved details in the above fields. Click save option to save the edited details. Click next option to access No. of units of electricity consumed per month/trainee from the date of commencement of training classes page and back option Total amount spent on raw material against each trade wise for the batch page.

76 5.14 No. of units of electricity consumed per month/trainee from the date of commencement of training classes User has to enter details of no. of units of electricity consumed per month per trainee from the date of commencement of training classes. Enter the no. of units of power consumed, power factor and bill amount for the first six months from the month of commencement of the training classes in the respective fields. User will enter the total no. of students and system generates consumption per month per trainee against the no. of units consumed, power factor and bill amount respectively and is displayed in the provided fields. Select save option to save the entered details. Edit the details in the respective fields to update the edited details. Click next option to access Result of all India trade test page and back option Average amount spent on raw materials trade per month per trainee of the batch page.

77 5.15 Result of all India trade test User would enter the results of all india trades test. Select trade name from the dropload list then enter the month and tear of conductinfg the test, No of trainees appeared, no. of students passed out and other details in the respective fields. Upoad the cerficates issued to the trainees. Select save option to save the entered details as record. Click on the required tarde in the grid to edit the saved record then select save option to update the record. Click next option to access Quality management system page and back option no. of units of electricity consumed per month/trainee from the date of commencement of training classes page.

78 5.16 Quality management system User would upload quality management manual and select yes option against all the points whichever institute is in compliance otherwise selects no option. Select save option to save the enter details as record. Click close option to access Declaration form page and back option to access Result of all India trade test page.

79 5.17 Declaration User clicks on declaration from, a pop with the all the forms would be displayed as shown in the above screenshot. User has to click on the form name where the data is not filled implies and to access the particular form page and enter the details in that particular form. User has to save the details in the same form. Select the declaration form again to access the popup to enter the details in another form. User can access directly relevant form and enter the details. User has to enter the details in all the forms and make sure all forms have details to be furnished. Then the pop up would not appear user can enter other details in the declaration form.

80 User would enter the details of the payment made through demand draft/cheque (Delhi only) with cheque no., amount and date of the cheque to deposit. In case if the user would like to make the payment online, clicks on the link option For online payment, please click here. User would enter the name of the responsible person and designation, the name of the institute and date would by default displays in the provided fields. Before submission of application, select print declaration option to take the print of the declaration form and signs the declaration form. Click the upload option to upload the scanned signed declaration form as document. Select show report option to view and check the correctness of all the entered details in a report format. Clicks submit option to save the entered application and submit for assessment.

81 User can make payment through online banking. The accounts details furnished in the pop up.

82 5.18 Report User would able to view the all the entered details in the report format. Before submission user can go through all the entered details and can make rectification as desired. Once the user submits the application cannot make any changes.