SELFONE WIRELESS PRINT STATION MODEL D90-WIFI-1 USER GUIDE VER 1.5

Transcription

1 SELFONE WIRELESS PRINT STATION MODEL D90-WIFI-1 USER GUIDE VER 1.5

2 CONTENTS Assembly/Parts List Workflow Wi-Fi Setup Android ios Fun Print Service Easy Print Service EasyPrint1 EasyPrint2 Administrator settings Menu Structure Log in Start Menu Setting Access Frame/Layout Setup Wizard TOP Menu 1. Print Info 2. Printer Info 3. System Info Statistic Application Info Error Info Setting Menus 4. HotFolder Setting 5. Print Setting 6. Service Setting 6.1 Web Print Setting Easy Print 1, Easy Print 2 Fun Print> 6.2 Print Limit Setting 6.3 Layout Setting (for Fun Print) 6.4. Screen Setting 7. System Setting Internal Wi-Fi Client mode Bridge Mode External Wi-Fi (USB) AP mode External Wi-Fi (USB) Client mode External Wi-Fi (LAN) AP mode External Wi-Fi (LAN) Client mode 8. Additional Setting 9. Maintenance Fun Print Layout setting - Layout position - size chart Frame image details for Fun Print (Underlaid frame) HotFolder setting Layout position - size chart Frame image details for Easy Print and Overlayed frame for FunPrint Wi-fi Print System Software Update Procedure List of Print Media vs. Print Sizes Frequently Asked Questions (FAQ) Troubleshooting

3 ASSEMBLY / PARTS LIST How to attach your CP-D90DW Printer to the NUC 1. Attach metal plate to the back of the D90 printer using (2) silver screws. (Note: Make sure to point arrow up on metal plate) 2. Attach black screw to the back of the NUC. 3. Insert NUC with attached screws to the metal plate on the back of the D90 printer. 4. Connect USB Cable to the D90 printer and power adapter to the NUC. 5. Plug NUC to an outlet and press power button on the NUC. *Make sure D90 Printer power is on before powering up the NUC. ame and use new admin/user password Parts List Contents Qty. Description NUC 1 Ft. USB Cable Power Adapter Metal Plate Black Screws Silver Screws Washer Installation Set-up Guide Manual Wireless device Connection to D90 printer Connection to power Attaches to the NUC Screw hooks to for the NUC Screws for metal plate Washers for metal plate QRef Manual Intel Manual 1. Washers Silver Screws 2. Back Screws Metal Plate NUC USB connection Type B Power Adapter USB connection Type A Power Button Wi-Fi Setup Warning: Connect Smart Phone/Tablet to the Selfone Wireless Print Station TM application. Do not unplug the power of the NUC without shutting down the system. Do not uplug USB cable from the NUC to the printer w/o properly shutting down the system. Proper shutdown; press the NUC's power button or perform a shutdown from the web program thru the admin user. 3

4 Simple Setup Workflow FunPrint basic setup workflow is as follows; 1) Wi-Fi connection to the PC box from a mobile device. Select SSID for the PC Box at Wi-fi setup menu of your mobile device 2) Start Application Tap "Start Application" button. For Android, manually open Chrome browser. For ios10.3.x, manually open Safari. 3) Move to Setup Log in screen Go to 4) Log in as Admin Default password is " admin " 5) Tap "Stop Service" button. 6) Tap "Frame/Layout Setup", and "2. FunPrint Layout 7) Follow Layout Setting Setup steps 1/7-7/7 8) Close setting screens and go back to "Start" screen 9) Tap "Start Service" button After Starting service, put "a.jp" (as an example) in the URL windows of a browser to redirect to FunPrint service screen. 4

5 OPERATION Wi-Fi SETUP Wi-Fi Setup <Android> 1. Open Smart Phone/Tablet Wi-Fi setting. Connect to: SSID of PC BOX 1) If Notification area shows Wi-Fi connection, Swipe down to access the notification area at top of screen. 2) Touch "Sign into Wi-Fi network" 2. Open Android browser (Chrome is recommended) and start application. *If a web page is not automatically redirected, type "a.jp" at URL window. 3. The application starts on a browser ) 2) [Note] Depending on a device, the above screen No.2 and /or Notification 1),2) does not appear. 5

6 OPERATION Wi-Fi SETUP <ios 9, 10, 11.2> 1. Open Smart Phone/Tablet Wi-Fi setting. Connect to: SSID of PC BOX 3. The application starts automatically on Safari browser. 2. Welcome screen automatically pops up. Tap "Start application" <ios > 1. Open Smart Phone/Tablet Wi-Fi setting. Connect to: SSID of PC BOX 3. Tap "Done" at the top right to close this screen. 2. Welcome screen automatically pops up. Tap "Start application"

7 OPERATION Wi-Fi SETUP <ios > (continued) 4. The application starts automatically on Safari browser. 4. <ios 10.3.x> 1. Open Smart Phone/Tablet Wi-Fi setting. Connect to: SSID of PC BOX Welcome screen automatically pops up. Tap "Start application" 3. Close the window by tapping Done button. 4. Manually open Safari browser to start the service. *If a web page is not automatically redirected, type "a.jp" at URL window Then, tap "Yes, I Agree to Terms and Conditions" at the bottom. 7

8 OPERATION FUN PRINT SERVICE Fun Print Service Fun Print allows selection of up to 6 images from your mobile device and place them in a pre-format template. Can preview and edit each image before printing. The feature and functions are: Customized screen colors with a capability of showing any shop or campaign logo Easy Layout/Frame setting wizard Configurable up to 6 images per print Users can edit each image (size, angle, position and add decoration icons) Overlaid frame can be set ( Import the frame image from Easy print setup menu) Copies are selectable by end-users End-users can preview image(s) before sending it for printing 1. Choose a template design (No. 1-6). Note: When only one template is activated, this screen won't appear Tap on the square to place the photo in that location. 3. Optional: To edit the photo, touch the photo and hold, to show the edit menu. *Adjust size, position and angle or re-select image (center icon). 4. Optional: click Stamp to show Select Stamp screen. Choose a stamp and select a stamp size. Touch image to stamp

9 OPERATION FUN PRINT SERVICE 5. "Print Confirmed" screen will come up Set number of copies. 7. Tap "Print". Image will be uploaded to the system. 8. "Print Complete" screen with Print number and SSID of the system will come up

10 OPERATION EASY PRINT SERVICE Easy Print Service Easy Print provides a quick and easy way of printing stored images from mobile phones and tablets (ios and Android). This service feature and functions are: Quick print service One image per print Users can select an image from their photo library or take a photo and send it directly for printing thru Wi-Fi connection Easy Print 1 1. Press "Yes, I Agree to Terms and Conditions" Take photo or pick an image from Photo Library. 3. The image will be immediately uploaded to the system. Printing will begin shortly. 4. "Complete" screen with Print number and SSID of the system will come up

11 OPERATION EASY PRINT SERVICE Easy Print 2 1. Press "Yes, I Agree to Terms and Conditions" Take photo or pick an image from Photo Library. 3. "Print Confirm" screen will come up. Press "Back" to re-select photo. 4. Press "Print" to up load image immediately. Printing will begin shortly. 5. "Complete" screen with Print number and SSID of the system will come up

12 SETTINGS Administrator Settings Menu structure Top Menu Frame/Layout Setup Start Service Stop Service Reboot Shutdown 1. Print Info 2. Printer Info 3. System Info 3-1. Statistics 3-2. Application Info 3-3. Error Info 4. HotFolder Setting 4-1 ID 101, Print Setting 6-1. Web Print 6. Service Setting 6.2 Print Limit Setting 7. System Setting 8. Additional Setting (Not Available) 9. Maintenance 10.1 FunPrint Frame Import 10.2 FunPrint Layout setting 6-3.Layout Setting 6-4. Screen Setting Items highlighted by Yellow are functions that "User "privilege can NOT access. Log In Access the setting menu at following URL; Defaults ; ID : Admin PW : Admin ID : user PW: user 12

13 SETTINGS Start menu Unique hardware number System version number Ready : Print service is active Stopped: Print service is stopped Error: Error occurs in application or a printer, or a printer is not connected. Currently available service Hotfolder and Print Size information is available for EasyPrint only. D90 print mode : available for EasyPrint only D90 print finish : available for EasyPrint only Setting Access Settings that are greyed out cannot be accessed when the print service is active. 13

14 SETTINGS To access Settings, tap Stop service on the start screen and select OK. Go to Top Menu to access settings or Frame/Layout Setup for easy setup wizard for Funprint. All setting menu FunPrint Setup Wizard When Error occurs, eg. during auto archiving, Error dialog in red is shown. Tap the dialog to see Error details. 14

15 SETTINGS - SETUP WIZARD Frame/Layout Setup Wizard Follow steps to setup FunPrint settings. 1. FunPrint Frame Import Import: Store frame image(s) - png format - in the following directory in the USB: Fun Print: /(USB)/Smartp/funprint/frame/ 2. Funprint Layout Setting 1/7 Max. 6 different frame/layout designs can be set. Tap a layout to modify. Set Enable at lest 1 layout. 2/7 1) Customize Layout Name - max 15letter. 2) Select Print Size from drop down menu. 3/7 1) Select Layout type from drop down menu. 2) Enable or disable Auto Rotate. 15

16 SETTINGS - SETUP WIZARD Refer to 4. HotFolder Setting for available function names. 4/7 Select a thumbnail of Frame Design. 5/7 When Caption option is set Enable, Caption setting screen appears. 1) Select type of caption. When selecting "Free", input a free caption or a function name. When Index number is used for a caption, set the start number. 2) Set Font, Color and layout of the caption 6/7 Adjust Caption position by arrow buttons. A part of caption may be cut off if set at too close to top / bottom end. 7/7 Setup summary is shown Tap Finish or back to change setting. 16

17 SETTINGS - INFO TOP Menu 1. Print Info Print Info Print data sent from mobile devices are shown. [Note] "Validate" for a pending print job is effective when "Validation" at Hotfolder setting is enabled. "Reprint is effective for a print job of which Status is shown as "Completed". 2. Printer Info Print Number will be shown on a user's device. You can input the order number and search. Select Validate to print photo or Reprint. [Note] When "Auto Delete" at System setting is enabled, Print Info will disappear after printing is completed. Printer Info Connected printer information Printer status Media size Media remaining count [Note] In case of 13x18(5x7"), 15x20(6x8") and 15x23(6x9") media, twice the number of remaining ink sheet is displayed. System Info - Statistics - Application info - Error Info 17

18 SETTINGS - INFO 3. System Info Statistics 2 tyeps of statistics data will be stored in the following folder. (USB)/(System ID)/ OrderList_YYYYMMDD_yyyy mmdd.csv OrderTotal_YYYYMMDD_yyyy mmdd.csv YYYYMMDD: "from" Date yyyymmdd: "to" Date Tap Show to display statistics data. Insert a USB flash drive to the USB slot and tap Save for exporting statistics data in csv format. Application Info Error Info Insert a USB flash drive to the USB slot and tap Save for exporting Error info. 18

19 SETTINGS Setting Menus 4. HotFolder Setting ID : Easy Print settings (Print quality/finish/size, copies, Layout, Overlaid Frame, Text, validation, etc.) ID : Fun Print settings (Print quality/finish, Overlaid Frame, validation) 5. Print Setting Gamma, Color, Sharpness setting for each Print Mode (Auto, Ultrafine, fine) 6. Service Setting 6-1. Web Print Setting Easy Print1, Easy Print2 : HotFolder selection, Import Frame Fun Print : 6-3. Layout Setting 4-4. Screen Setting Import Frame 6-2. Print Limit Setting Print Limit ON/OFF Max / Expiration time settings 7. System Setting Login Settings admin, user ID, password Wi-Fi Settings SSID, password, Channel External Wi-Fi (USB, LAN)) Valid Domain, Bridge Mode Auto Start, Auto Delete, Auto Archive Language, Date &Time 8. Additional Setting Future option (Not available) 9. Maintenance Export Photo data (Original/Finished Photo) Service Reset Clear (Print Limit, Print Limit User) Export / Import Settings (Service / Service&System) 19

20 SETTINGS 4. HotFolder Setting HotFolders ID are used for Easy Print Service 1 &2. To choose a HotFolder for Easy Print, go to: Service Setting > Web Print Setting HotFolders ID are used for Fun Print Service. Select a Preset Print Size from drop down menu. i.e. 10x15(4x6 ) Choose a Preset Layout from drop down menu. i.e. 10x15_Type2 *Make sure to select the same layout size specified in Print Size Layout: i.e.10x15_type2 Different frames will appear according to the number of times it is set to appear in the Freq (frequency) setting. Refer to Easy Print Layout and Frame Chart for more Details When "Variable" is selected for Layout, positions (x,y) and size (W,H) of image can be set. None, Frame select or Frame Rotation When Frame select is chosen, available frames are listed in the drop down menu. Be sure to Set to save settings. When Frame Rotation is chosen, Rotation Edit menu appears here. 20

21 SETTINGS Text > Edit Add text or a function name: {S_DATE} Photo shooting date {S_TIME} Photo shooting time {P_DATE} Print date {P_TIME} Print time {INDEX} Index number {N_ORDER} Photo number [Note] {S_DATE}, {S_TIME} are not available for HEIF formatted image x, y: Text position in pixel W,H: Text box size Font size will vary depending on the text box size 21

22 SETTINGS 5. Print Setting Auto resume after recovery from an error state. Select Auto, UltraFine or Fine for setting parameters below. Gamma+1.cpd, Gamma+2.cpd or Gamma+3.cpd are selectable to adjust brightness of image. Level of Brightness by Gamma Table setting None < Gamma+1.cpd < Gamma+2.cpd < Gamma+3.cpd ( Normal) (Brighter) Be sure to Set to save settings. Print mode for each service must be set in HotFolder Setting menu > Quality. Auto Fine UltraFine Image quality parameters can be set for each Print Mode. For example: Adjust sharpness settings for Fine mode and Auto mode. 22

23 SETTINGS 6. Service Setting 6.1 Web Print Setting <Easy Print 1, Easy Print 2> Select Easy Print1 or Easy Print 2 Select a user defined HotFolder set by 4. HotFolder Setting Import additional Frame(s) if available or Delete unnecessary Frame(s). Be sure to Set to save settings. Easy Print uses an overlay frame on to a photo image with a transparent window. The window shape can be quadrangle, round or any shape. Store following directory for Easy frame image: /(USB)/Smartp/easyprint/frame/***.png <Fun print> Select Easy Print1 or Easy Print 2 See 6-3. Layout Setting (Note) See 6-4. Screen Setting Import additional Frame(s) if available or Delete unnecessary Frame(s). (Note) Be sure to Set to save settings. [Note] Layout Setting and Frame import are available at "Frame/Layout Setup" also. Store following directory for FunPrint underlaid frame image. /(USB)/Smartp/funprint/frame/***.png 23

24 SETTINGS <About Frames for Fun Print> The basic fame for Fun Print is Underlaid of the image, and image shape is always quadrangle. Frame/Layout Setup wizard for FunPrint allows to use the underlaid frame only. However, if Hotfolder setting for # is used, Overlay frame can be used for Fun Print also. The overlay frame can be a full size frame design with a transparent window for a photo image or overlay design like a logo or a character with a full size transparent canvas. [Import] Overlayed frame for Fun Print must be imported from Service Setting - Easy Print1 or 2 - Frame Setting - Import Store following directory for Overlayed frame image: /(USB)/Smartp/easyprint/frame/***.png [Note] The overlayed frame will not be displayed on Fun Print Service screen on user's mobile device, but added on a print. Overlayed [Use of frame] HotFolder Setting - ID 201, , corresponding to Layout number of Funprint from 1 to 6 - Frame - Frame select / Frame 6.2 Print Limit Setting Underlaid Max Print Count setting per system Max Print Count setting per device The above max count will be reset after the expiration time. System - Max Print Count Print service will stop when the total print reaches the setting value. i.e. If 1000 is set, the service stops when the number of prints reaches User - Max Print Count Sets max print count & timer for the user. Each device is allowed to print until each total print reaches the setting value. Print limit is reset after expiration time has passed. i.e. If 1 hour is set for Expiration Time, each mobile device can print up to 10 copies per hour. Another 10 copies on the next hour. 24

25 SETTINGS 6.3 Layout Setting (for Fun Print) - Advanced For easy setting, use Frame/Layout Setup wizard from the Start menu. Customize Layout Name. - max 15letter Select a Preset Print Size from drop down menu. i.e. 10x15(4x6 ) Choose a Preset Layout from drop down menu. i.e. 10x15_Type2 *Make sure to select the same layout size specified in Print Size Layout: i.e.10x15_type2 Refer to Fun Print Layout and Frame Chart for more Details When Variable is chosen for Layout, number of image(s) - up to 6, positions (x,y) and size (W,H) for each image can be defined. Available Frames are listed in the drop down menu. Be sure to Set to save settings. 25

26 SETTINGS 6.4. Screen Setting (for Fun Print and Welcome screen ) Note: When Easy Print1 or 2 service is active, these settings reflects Welcome screen only Preview image is shown. (example) Customization of color for the Welcome screen and FunPrint screens: Color of Background, Title Bar, Button and Text Import Logo image from USB drive. Delete Logo image Select Logo image Be sure to Set to save settings. Logo Image data requirements Logo file type : png format Logo file size : 1000 x 1000 pixels or less (Size of the sample logo file is 900 x 400 pixels) Store logo images in the following folder; /(USB)/Smartp/theme/***.png Use Alphabet and number for a logo file name. Do not include space in the name. 26

27 SETTINGS 7. System Setting No remedy for forgetting password. Make a note of new password(s) if changed. Login Password setting admin password user password SSID Wi-Fi password Internal Wi-Fi setting for PC Box SSID, Password and Channel setting as Access Point mode *Internal Wi-Fi setting is always ON regardless of External Wi-Fi ON/OFF setting Internal Wi-Fi setting for PC Box Client mode ON/OFF External Wi-Fi (USB) ON/OFF External Wi-Fi (LAN) ON/OFF Valid domain setting for internet connection Bridge mode ON/OFF Automatically start up at Power ON, when enabled. Automatically delete photo data after printing, when enabled. Automatically copy photo data to a designated device, SD card or USB Auto Archive will copy photo data to the following folder; Be sure to Set to save settings. /(USB or SD )/SmartpImages/****(systemID)/OrderData /PrintData * System ID is shown on Setup Start menu. *"Auto Delete" must be disabled for activating Auto Archive. *When SD card is used, insert or remove a SD card while the PC box is powered off. Time Zone and Date, Time settings [Note] Do not connect more than one USB drive to the PC Box at the same time. [Note] Be sure to reboot the PC after change of System Setting item(s). 27

28 SETTINGS Internal Wi-Fi Client mode * Set SSID and password for Wi-Fi router (Master router) that PC Box accesses. Set necessary network parameters by disabling DHCP, as needed. *Client mode allows Internet access when Master router has Internet connection. Bridge Mode Mobile devices lose Internet connection while connected to the system via Wi-Fi. Using Client mode and Bridge Mode, such mobile devices can access Internet, eg. photo storage in icloud. Internal Wi-fi (Client) : Enable Bridge Mode : Enable Set necessary valid domain name(s) Bridge Mode : Internet access (Valid domain only) through PC Box Internet AP (Master) Client (Slave) Client (Slave) Network1 No Internet access AP (Master) Network2 Internet access 28

29 SETTINGS External Wi-Fi (USB) AP mode Set SSID and password for PC External Wi-Fi (USB) setting for AP mode 1. Connect USB Wi-Fi adapter to a PC box. - Make sure to plug the USB port of the PC box before setting. 2. Apply External Wi-Fi (USB) settings 3. Reboot the system - Some USB Wi-Fi adapter may not be compatible. External Wi-Fi (USB) Client mode * External Wi-Fi (LAN) AP mode External Wi-Fi (LAN) Client mode * Set SSID and password for Wi-Fi router (Master router) that PC Box accesses. Set necessary network parameters by disabling DHCP, as needed. *Client mode allows Internet access when Master router has Internet connection. External Wi-Fi (LAN) Setting for AP mode 1. Set access point settings as follows: Mode: Access point mode Access point name: any SSID Wired LAN setting: IP Address setting: Fixed IP Address: Subnet mask: DHCP server: Disabled - Name of setting may differ depending on model - See operational manual of access point device for detail 2. Connect the Wi-Fi access point with LAN cable to the LAN port of apc box 3. Apply External Wi-Fi (LAN) settings 4. Reboot the system Set necessary network parameters by disabling DHCP, as needed. 29

30 SETTINGS 8. Additional Setting (Not Available : Future option) 9. Maintenance Original Photo data or Finished Photo data with a frame etc. or both can be manually exported to a USB Flash drive as a zip file. "Auto Delete" at 7. System Setting must be disabled for use of this service. *If "Auto Archive" at 7. System Setting is enabled, both data in JPEG format are automatically stored in a designated device. * Max Print Count See 6.2 Print Limit setting Export Photo data 1) Select Original Photo, Finished Photo or All. 2) Insert USB Flash Drive to the system. 3) Tap Export 4) Wait until a dialog "Successfully completed!" is shown. Delete All image data and print Info data. (Statistics data is not deleted.) Clear Max Print count Limit per system * Clear Max Print count Limit per each device * Service setting : System setting items like SSID, password are not included. Service & System setting : System setting items like SSID, password are included. Export Service Setting 1) Select Service setting or Service & System setting. 2) Insert USB Flash Drive to the system. 3) Tap Export 4) Wait until a dialog "Successfully completed!" is shown. 5) Remove the USB drive Import Service Setting 1) Insert USB Flash Drive including Export file to the system. 3) Tap Import 4) Tap OK on "Successfully completed!" dialog 5) Remove the USB drive and reboot the system. Note: Both systems for Export and Import must have the same software version. 30

31 FRAME SPECIFICATIONS - FUN PRINT Fun Print Layout setting Layout position - size chart Preset No. 1 Layout image Print size Setting values [pixel] Preset Print size Setting values [pixel] Image Layout image Image Inch (cm) X Y W H No. Inch (cm) X Y W H 9x13(3.5x5") x13(3.5x5") Image1 Image1 10x15(4x6") x15(4x6") x13(3.5x5") x 8.9(6x3.5") Image Image1 10x15(4x6") *Post card media is not applicable - 9x13(3.5x5") Image x15(4x6") Image x13(3.5x5") 13x18(5x7") Image x20(6x8") Image x23(6x9") Image Image x11(6x4.3") Image x15(4x6") 15x21(6x8.3") Image x15(6x6") Image x13(5x5") x13(3.5x5") Image x15(4x6") x13(3.5x5") Image x18(5x7") Image x20(6x8") Image x23(6x9") Image x15(4x6") Image x11(6x4.3") Image x21(6x8.3") x15(6x6") x13(5x5") x13(3.5x5") Image Image1 10x15(4x6") x 8.9(6x3.5") Image Image *Post card media is not - applicable x13(3.5x5") Image Image1 10x15(4x6") Image x13(3.5x5") Image Image Image Image x15(4x6") Image Image x13(3.5x5") Image Image1 10x15(4x6") x13(3.5x5") Image x15(4x6") Image Image Image Image x13(3.5x5") Image1 1 10x15(4x6") x15(2x6") Image *Post card media is not - applicable 9x13(3.5x5") Image Image1 10x15(4x6") Image x15(2x6") 2 Image Image *Post card media is not - applicable [Caution] While Post card media is installed, do not set No. 11, 23, 26 and 27, or variable. The error state will continue if a photo with those print settings is sent to a printer. ( You cannot stop service even after reboot the PC.) [Method of recovery from the continued error state] 1. Press and hold the power button of PC to shutdown. 2. Power off Printer. 3. Turn on PC. 4. Log in with Admin, stop the service and go to Maintenance menu. 5. Tap "Clear all" to delete print jobs. ( All photo data will be deleted.) 6. Power on Printer. or, load CK-D746, D768, D868 or D769 media (both ribbon and paper). The pending job will be printed. 31

32 FRAME SPECIFICATIONS - FUN PRINT Preset No. Layout image Print size Inch (cm) Image Setting values [pixel] X Y W H x13(3.5x5") Image1 10x15(4x6") x13(3.5x5") x15(4x6") x18(5x7") A 15x20(6x8") x23(6x9") Image x11(6x4.3") x21(6x8.3") x15(6x6") x13(5x5") Image x15(4x6") 5x15(2x6") x2 *Post card media is not applicable 10x15(4x6") 5x15(2x6") x2 *Post card media is not applicable Image Image Image Image Image Image Image Image Image Image Image Image Image Image Image Image Image Image Image x13(3.5x5") x15(4x6") x18(5x7") x20(6x8") x23(6x9") A 15x8.5(6x3.3") Image1 15x8.9(6x3.5") x11(6x4.3") x21(6x8.3") x15(6x6") x13(5x5") x15(2x6") x13(3.5x5") x15(4x6") x18(5x7") x20(6x8") x23(6x9") A 15x8.5(6x3.3") Image1 15x8.9(6x3.5") x11(6x4.3") x21(6x8.3") x15(6x6") x13(5x5") x15(2x6")

33 FRAME SPECIFICATIONS - FUN PRINT Frame image details for Fun Print (Underlaid frame) 1. Frame image specifications Service Image pixels Image format Frame file name Example Refer to the Print pixels Any file name. Fun Print PNG file 5x15_frame1.png chart A part of the file name is not shown if the file name is long. 2. Procedure of creating Frame image *Please note that approx. 4mm (40 dots) from the edge of image data will be trimmed off when printing for full-bleed. (ex) Frame for 10x15 (2x6 ) (x,y) = (0, 0) (x,y) = (87, 71) (x,y) = (87, 527) (x,y) = (87, 982) (1) Prepare image data fits to a print size. 3. Layout parameters setting (2) Design contents of the frame. 625 (3) Specify a position and size of area where photo image is to be fit. *Transparent background is not necessary for each image position. Locate Service Setting - Fun Photo - Layout Edit (1) Set Layout Variable (2) Set Canvas ( Portrait for this example) (3) Set position (x,y) and size (W,H) parameters for each Image. In this example Image 1: x =87, y=71, W=451, H=361 Image 2: z=87, y=527, W=451, H=361 Image 3: z=87, y=982, W=451, H=361 (4) Click Set Print size Print pixels W [pixel] H[pixel] L(9 x 13) L(13 x 18) KG(10 x 15) A5(15 x 20) A5W(15 x 23) x x x x x x x

34 FRAME SPECIFICATIONS - EASY PRINT HotFolder setting Layout position - size chart Type Image Print size Unit [pixel] Type Image Print size Unit [pixel] X Y W H X Y W H Variable Variable L (9 x 13) L (9 x 13) L (13 x 18) L (13 x 18) KG (10 x 15) KG (10 x 15) A5 (15 x 20) A5 (15 x 20) A5W (15 x 23) A5W (15 x 23) x x x x x x x x x x x x x 15 5 x Variable Variable L (9 x 13) L (9 x 13) L (13 x 18) L (13 x 18) KG (10 x 15) KG (10 x 15) A5 (15 x 20) A5 (15 x 20) A5W (15 x 23) A5W (15 x 23) x x x x x x x x x x x x x x Variable Variable L (9 x 13) L (9 x 13) L (13 x 18) L (13 x 18) KG (10 x 15) KG (10 x 15) A5 (15 x 20) A5 (15 x 20) A5W (15 x 23) A5W (15 x 23) x x x x x x x x x x x x x x Variable Variable L (9 x 13) L (9 x 13) L (13 x 18) L (13 x 18) KG (10 x 15) KG (10 x 15) A5 (15 x 20) A5 (15 x 20) A5W (15 x 23) A5W (15 x 23) x x x x x x x x x x x x x x Variable Variable L (9 x 13) L (9 x 13) L (13 x 18) L (13 x 18) KG (10 x 15) KG (10 x 15) A5 (15 x 20) A5 (15 x 20) A5W (15 x 23) A5W (15 x 23) x x A A A A A A 15 x x x x x x x x x x x x Variable L (9 x 13) L (13 x 18) KG (10 x 15) A5 (15 x 20) A5W (15 x 23) x x x x x x x A A A A A

35 FRAME SPECIFICATIONS - EASY PRINT Frame image details for Easy Print and Overlayed frame for FunPrint 1. Frame image specifications Service Image pixels EasyPrint Refer to the Print pixels FunPrint chart Image format PNG file Frame file name Any file name. A part of the file name is not shown if the file name is long. Example 10x15_frame1.png 2. Procedure of creating Frame image (1) Prepare image data fits to a print size. *Please note that approx. 4mm (40 dots) from the edge of image data will be trimmed off when printing for full-bleed. (ex.) Frame for 10x15(4x6") size 1852pixel Print size CP-D90DW Print pixels Print pixels W [pixel] H[pixel] L(9 x 13) L(13 x 18) KG(10 x 15) A5(15 x 20) A5W(15 x 23) x x x x x x x (2) Design contents of the frame. <Example of Fun Print Overlayed Frame> Logo (3) Specify a position and size of area where photo image is to be fit. * The photo fitting area must be a transparent background. If not, only frame image will be printed, even if a photo data is sent to the system through wi-fi. (x, y) = (675, 62) (x, y) = (0, 0) W = 1102 Transparent background [Note] The overlayed frame will not be displayed on Fun Print Service screen on user's mobile device, but added on a print. Overlayed frame design H = 1102 Transparent 透過処理 back ground HotFolder Setting 3. Setting of Photo fitting position by application Open HotFolder setting of Maintenance menu, 1) set Layout "Variable" 2) set the image position and size at x, y, W, H setting window. (for this example, x = 675, y = 62, W = 1102, H = 1102) 3) Click "Set" button

36 UPDATE Wi-fi Print System Software Update Procedure 1. Log in the maintenance mode and make sure that the current System Version is the update applicable version designated by a release note Software update is valid for System ver or later versions. <Update for > Applicable versions Ver.1.1, 1.2, 1.3, 1.4 It takes about 20 minutes. Delete print (order) data from Maintenance - Clear All. (Save data first as necessary) 2. Shutdown the system. 3. Using Windows PC, create "SmartpUpdate" folder at the root directory of a USB flash drive and copy the update file "KT_V****.zip" in the folder. /(USB)/SmartpUpdate/KT_V****.zip 4. Insert the USB flash drive to a USB port of the system. 5. Power On the PC. The software update starts automatically. * Do not unplug the USB flash drive while updating. * Refer to a release note for approx. time to complete the update. 6. After the update, the PC will soon reboot automatically. There is no obvious sign showing the timing of automatic reboot. Check wi-fi SSID by a smart phone or other wireless device. If the Wi-Fi SSID of your system stably appears, the system is already rebooted. 7. Log in the Start menu and confirm that the System version is updated. 36

37 List of Print Media vs. Print Sizes Paper Ink Ribbon set Media Name displayed at Print Applicable print sizes Model Size Info screen Print size W, H value [pixel] CK-D735 9x13(3.5x5") 9x13(3.5x5") 9x13(3.5x5") - Variable 1550 x (625~1076) 10x15(4x6") - 15x8.5(6x3.3") - CK-D746 10x15(4x6") 10x15(4x6") 15x8.9(6x3.5") - 5x15(2x6") - (5x15)x 2((2x6")x2) - Variable 1852 x (625~1226) 9x13(3.5x5") - CK-D757 13x18(5x7") 13x18(5x7") 13x18(5x7") - 13x13(5x5") - Variable 1550 x (625~2128) 10x15(4x6") - 15x20(6x8") - 15x8.5(6x3.3") - 15x8.9(6x3.5") - CK-D768 15x20(6x8") 15x20(6x8") 15x11(6x4.3") - CK-D868 15x15(2x6") - 5x15(2x6") - (5x15)x 2((2x6")x2) - Variable 1852 x (625~2488) 10x15(4x6") - 15x20(6x8") - 15x23(6x9") - 15x8.5(6x3.3") - 15x8.9(6x3.5") - CK-D769 15x23(6x9") 15x23(6x9") 15x11(6x4.3") - 15x21(6x8.5") - 15x15(6x6") - 5x15(2x6") - (5x15)x 2((2x6")x2) - Variable 1852 x (625~2729) 10x15(4x6") - 15x8.5(6x3.3") - CK-D746-PF42 10x15(4x6") 15x8.9(6x3.5") - 10x15(4x6") Perforated 5x15(2x6") - (5x15)x 2((2x6")x2) - Variable 1852 x (625~1226) CK-D946PST Postcard 10x15(4x6") 10x15(4x6") - 37

38 FAQ How to import and set custom frame for Easy Print. 1. Set Wi-Fi connection to:.selfone_wi-fi_print 2. Go to: 3. Log in as an Admin & Stop service 4. Go to Top Menu > Service Setting > Web Print Setting a. Select Mode - Easy Print1/Easy Print 2 b. Select HotFolder: i.e. UserFolder_1 c. To add a custom frame, go to: Frame Setting > Import (i.e. 10x15_Type2.png) i. Insert the USB storage device and click OK Note: Custom frame is selected in HotFolder Settings > User Folder_1 d. Press Set to save Web Print Setting 5. Go to Top Menu > HotFolder Setting and set print specifications: i.e. UserFolder_1 a. Set Print Size: i.e. 10x15 (4x6") b. Set Layout: i.e. 10x15_Type2 (Illustration of layout is shown) i. Refer to Easy Print Layout and Frame Chart for more details c. To add a frame, select Frame: Frame Select > Choose the custom frame previously uploaded from the drop down menu: i.e. *10x15_Type2.png d. To add text, select Text: Edit i. Enable the Text Setting feature and add text. ii. Press Set to save Text Setting e. Press Set to save HotFolder Setting 6. Go to Start page and Start Service 7. To verify setting changes, review Service Info in Start Page a. Make sure to refresh the browser window to load revised settings. How to import and set custom frame for Fun Print. 1. Set Wi-Fi connection to:.selfone_wi-fi_print 2. Go to: 3. Log in as an Admin & Stop service 4. Go to Top Menu > Service Setting > Web Print Setting a. Select Mode - Fun Print b. To add a custom frame, go to: Frame Setting > Import i. Insert the USB storage device click OK Note: Custom frame is selected within Fun Print > Layout Setting > Edit c. Select Layout Setting: Edit i. Set Print Size: i.e. 5x15 ii. Set Layout: i.e. 5x15_Type26 (Illustration of layout is shown) iii. To add a frame, select Frame: Choose the custom frame previously uploaded from the drop down menu: i.e. *5x15_Type26.png iv. Press Set to save Layout Setting d. Press Set to save Web Print Setting 5. Go to Start page and Start Service 6. To verify setting changes, review Service Info in Start Page a. Make sure to refresh the browser window to load revised settings. How to re-name the Wi-Fi (SSID) and reset admin/user password 1. Set Wi-Fi connection to:.selfone_wi-fi_print 2. Go to: 3. Log in as an Admin & Stop service 4. Go to Top Menu > System Settings a. Login Setting: Type in new admin/user login password b. Wi-Fi setting: Type in new SSID name c. Press Set to save System Settings 5. Go to Start page and Reboot 6. After restarting, connect to new SSID name and use new admin/user password IMPORTANT: Make sure to structure your USB drive with following folder layout. For D90-WIFI-1 to recognize the custom frame, the.png file must be in a folder structure starting at the root directory: \smartp\easyprint\frame\filename.png. easyprint frame PNG 10x15_Type2.png USB DRIVE smartp funprint frame PNG 5x15_Type26.png 38

39 TROUBLE SHOOTING Always start out by turning the smart phone or tablet off and back on again to see the issue persists. How to properly shut down the system: 1. Press the NUC's power button. 2. or using the application, go to maintenance login: log in as an administrator. On the start screen, tap Shutdown. Warning: Do not unplug NUC from the power outlet w/o properly shutting down the system. Do not uplug USB cable from the NUC to the printer w/o properly shutting down the system. If the App isn't responding: 1. If the app is having issues, acting slow or giving problems, reload the browser screen. 2. If reloading the screen does not work, check Wi-Fi connection and make sure you are connected to.selfone_wifi_print If the Printer is not responding: Note: When logged in as an administrator, the start screen will show System: Error 1. Make sure your printer is plugged in and power is on. 2. Make sure that USB connection between the printer (Type B) and NUC (Type A) is secure. 3. Printer is out of paper and/or ink. a. Properly shut down the system and replace paper and/or ink, then power it back on and re-connect to the Wi-Fi. If the NUC is not responding: 1. Make sure the NUC is plugged in and power is on. 2. Make sure that USB connection between the NUC (Type A) and printer (Type B) is secure. Wi-Fi is a trademark of the wi-fi alliance. Intel and Intel NUC are registered trademarks of Intel Corporation in the U.S. and other countries. ios, iphone and Safari are registered trademarks of Apple Inc., registered in the U.S. and other countries. Android is a registered trademark of Google Inc., in the U.S. and other countries. Canon and EOS are registered trademarks of Canon Inc. All information contained herein is subject to change without prior notice. Other brand, product, and service names are trademarks or registered trademarks of their respective companies. Product appearance in this manual does not imply that Mitsubishi Electric Corporation intends to make it available in all countries where the company and its subsidiaries operate. Photographs are simulated images. USA/Latin America MITSUBISHI ELECTRIC VISUAL IMAGING SYSTEMS Professional Product Sales Phone: Canada MITSUBISHI ELECTRIC SALES CANADA, INC. Display & Imaging Solutions Division Phone: