Integrated Management System S-NET mini Buttons

Transcription

1 Buttons LAN connection Data transfer Error indication Speaker Menu button Software keyboard Lock button Power/LCD ON/OFF button

2 Connectors RS232 LAN RS485 Contact input Power input Reset button SD card slot (S/W upgrade) USB (device) USB (host) 2

3 Installation Wiring () Interface Module Polarized! MIM-B3B Max. 6 MIM-B3D Individual mode only! (MAIN address-based) MIM-B3D 3

4 Installation Wiring (2) Interface Module K4:OFF Polarized! C2 C R2 R ` ` ` ` 220VAC 0 MIM-B3B/B3D K4:OFF Max. 6 MIM-B04A 0 Individual mode only! (MAIN address-based) Max. 6 C2 C R2 R ` ` ` ` 220VAC To interface modules 4

5 Installation Wiring (3) DMS When using S-NET Mini with DMS2, communication can only be done via LAN DMS2 K4:OFF C2 C R2 R ` ` 220VAC 0 Network switch LAN cable Ethernet DMS2 C2 C R2 R ` ` K4:OFF 220VAC 5 MIM-B3B/B3D Max. 6

6 Tracking With Interface Module Connection 3 Press System management Press Tracking Select Centralized controller & Transmitter Select Transmitter

7 Tracking With Interface Module transmitter (MIM-B3A/B/D/E). From the main menu, press System Management 2. Under the Communication Setup tab, select Centralized Controller & Transmitter and then press Apply 3. When prompted for a password, enter: 0000 (this is the default password) 4. On main menu, press Tracking 5. Select Transmitter then press Apply. 6. Select Group or Individual mode, then press Tracking Start. When prompted enter SNET Mini default password: Once tracking has completed without error, press OK 7

8 Tracking With Centralized Controller Connection 3 Press System management Press Tracking Select Centralized controller & Transmitter Select Centralized controller

9 Tracking With Centralized Controller Connection (MCM-A202A/B). From the main menu, press System Management 2. Under the Communication Setup tab, select Centralized Controller & Transmitter and then press Apply 3. When prompted for a password, enter: 0000 (this is the default password) 4. On main menu, press Tracking 5. Select Centralized Controller then press Apply. 6. Select Group or Individual mode, then press Tracking Start. When prompted enter SNET Mini default password: Once tracking has completed without error, press OK Note: In the Centralized Controller, make sure dip switch 4 is set to the OFF position 9

10 Tracking With DMS Connection 3 Press System management Press H/W setup Select DMS, then press Apply and then Menu IP setup, enter IP information then press Menu

11 Tracking With DMS Connection If using a static IP address, the designated IP address for the SNET Mini must be unique on the network (no overlap with other network devices)

12 Tracking With DMS Connection DMS IP setup ( DMS IP Setup tab) Default : Authorization, enter DMS password of 234 Group / Individual mode Individual: tracking based on MAIN address Group: based on RMC address

13 Tracking With DMS Connection steps. From the main menu, press System Management 2. Under the Communication Setup tab, select DMS and then press Apply 3. When prompted for a password, enter: 0000 (this is the default password) 4. From the main menu press H/W Setup 5. Under the IP Setup tab, enter the IP information for the SNET mini. This IP address needs to be unique on the network. Press Apply. 6. From the main menu press System Management 7. Under the DMS IP Setup & Update Data tab enter the IP address of the DMS2 on the network along with the password to the DMS2. If a message appears regarding a password error, retry with password: Press Connect & Update. When prompted, enter default SNET Mini password: Once the SNET Mini has located the DMS2, press the menu button (right of the touchscreen). 0. On main menu, press Tracking. Select Group or Individual mode, then press Tracking Start. When prompted enter SNET Mini default password: Once tracking has completed without error, press OK 3