Releasenotes for Océ Color Copy/Océ Copy Easy Version 8.7 (Build ) compared to Version 8.6 (Build )

Transcription

1 Releasenotes for Océ Color Copy/Océ Copy Easy Version 8.7 (Build ) compared to Version 8.6 (Build ) Printers: Océ CS2424 Océ CS2436 HP DesignJet 620 HP DesignJet 770 HP DesignJet T1200 Epson Stylus Pro 7700 Epson Stylus Pro 9700 New Features (numbers refer to our internal database): Colorwave600: Folding enforces deposit to back Colorwave600: Disable automatic title block detection Folding was always set back to OFF Improved quality with Epson Stylus Pro 7450/9450 (updated Epson HTM) Additional media types for Colorwave Additional media and profiles for Oce CS Performance improvement with Contex Scanners and OEMs. The original is released before all data has been transmitted Differentiate jp2 and jpk file format Add invert option to greyscale filter editor Fixed problems (numbers refer to our internal database): Lineart printmode was producing monochrome output only on HP800 with most recent printer firmware The roll config dialogue was stumbling over a quotation mark in the printer panel display Possible access violation with large monitors resolution or dual monitor configuration Output placement with folding adjusted Error with saving pallete files from Editor Multi Copy Nesting with multi roll printers Improved automated deskew The delay when typing IP adress is fixed Set printing via the subsystem is now working LFM425 Colored 80 and LFM340 Lightblock are recognised - Colorwave600: The problem with unfolded documents go to back is fixed - Print Perfect are displayed as Oce Matte Photopaper is fixed - The Problem with Smart Dry 240g loaded and Smart Dry 190g is displayed is resolved Panel display message in Printerdialog now complete Updated media list for Oce Colorwave Setup.exe is signed with an SCP signature

2 Releasenotes for Océ Color Copy/Océ Copy Easy Version 8.6 (Build ) compared to Version 8.5 (Build ) Printers: Canon ipf 650 Canon ipf 655 Canon ipf 750 Canon ipf 755 Scanners: New Features (numbers refer to our internal database): Epson Stylus Pro 7900/9900: Single sheet feeder now supported The Load File Dialogue of the Editor now offers vector formats such as PDF, DWF, etc Enable borderless printing with Epson Stylus Pro 7900/9900 and The scanner settings allow to define the width of a hanging strip, i.e. the leading edge of the document will not be scanned/copied Updated versions of Quick Reference Cards Download Version of Copy Easy has been reduced in file size Copy Easy to support 1bit monochrome scan-to-file Quality improvements for 1bit monochrome filters Lines&Text, Grays&Lines, Transparent Now supporting Maya IFF format Use of gray filters for 1-bit scanning (CopyEasy) possible. Fixed problems (numbers refer to our internal database): Folding is now switched off when printing calibration targets The Canon printers (and OEMs) do not allow borderless printing for single sheets. This is now reflected in the printer option More intuitve handling of extension when saving the file with cost tracking information to CSV The Checkbox to inquire the printer status was missing for some Canon Printers Some listboxes with scrollbars were showing a black background after use of the scrollbars The nesting function has been optimized regarding the paper use A problem with printing calibration targets on user defined medias with Oce CS printers has been fixed Borderless printing caused an error message on the printer when printing images smaller than roll width Borderless printing in combination with tiling leaves a white margin at the top The misleading hint shown when using single sheet input has been corrected Width detection of CS4236 adjusted Problem with gamma warning when changing brightness fixed Width detection of CopyEasy and ColorCopy adjusted Resolution mismatch in zoom window of filter editor corrected Folding A2 using turntable corrected. Releasenotes for Océ Color Copy/Océ Copy Easy Version 8.5 (Build ) compared to Version 8.4 (Build ) Version (Build )

3 Printers: Epson Stylus PRO 7900 Epson Stylus PRO 9900 HP DesignJet 4020 HP DesignJet 4520 HP DesignJet T1120 Scanners: Oce CS4244S New Features and fixed problems (numbers refer to our internal database) Job Editor: A problem with paneling option in combination with non-printable files has been fixed Avoid all occurrences of accent in name Oce Scanner waking up from sleep mode did require a restart of the software A problem with roll width tolerance and auto rotation has been fixed Error message when canceling opening of the hardware dialogue under certain conditions Addition in the PDF/a header for compliance ISO b By using the option Load To Editor and opening the editor from the menu the user could produce two conflicting spy windows Job Editor: sorting after name was regarding not only the file name but also the path the files originated from Prepared for Polish localization As in Copy Easy, allow to switch folding on and off from main UI in Oce Color Copy Editor: Show the zoom level in status bar also in Panning mode Omit settings for Scanner Power save since they are overwritten by Oce Scan Agent In Job Editor the Column dimensions should show the original document size disregarding the scaling and the AOI Scan-to-file: Feature the product name in PDF header under creator S2F: Change URL in PDF properties from to Folding with the Colorwave and TCS was not working in Copy Easy Back channeling was not working when printing via Windows queue with limited user rights Error in Subsystem under Vista due to file access restrictions With monochrome prints the color mode switch is set correctly in the OJT Error message in Filter Editor with extreme tiny files CD does no longer contain and install the Contex software components Filter Editor: Heap overflow error with demo scanner in Synchro Cut mode when selecting a zoom area out of the image area Delay with initialization of CIS scanners Install Scanner user documentation and create shortcut in start menu Support Kodak 1200i as Non-Oce-Inkjet The grey filter for adaptively setting black/white point (found in the filter editor under the tab "adaptive") now lets the user enter the radius value in mm; was pixel User management: User names sorted alphabetically In simple filter editor the brightness slider was not labeled Printer status request for Colorwave fixed TCS/Colorwave: Force to right aligend position when folding Unclear situation regarding media profiles has been resolved The functions for adjustment of the width detection have been named more intuitively in order to avoid confusing them with the document alignment Problem with Access rights under Windows Vista Avoid TCP/IP timeout for Network printers Polish GUI localization When printer status inquire fails a message will inform the operator The settings for the document alignment in scanner were confusing and inconsistent for face-down and face-up scanners When a patch is applied Oce Copy Easy now can be used with dongle and key code

4 30483 The patch for the use of Oce Copy Easy with dongle has been placed on the Copy Easy DVD in the subfolder \\donglepatch The Default for the top margin for new Contex-Scanners will be changed to 0mm The default for the width add-on in the width detection will be set to 0mm TCS/TDS/Colorwave: The Default for roll width tolerance will be set to 2mm The Default print mode in OCC for the Colorwave should be Oce Print Assistant, as in Copy Easy The default compression for PDF has been changed to LZW; for PDF/a unpacked has been choosen as default In some cases backchannelling mght not work, if ColorWave or TDS/TCS printers and ColorCopy or CopyEasy are located in different subnets. In these cases a warning will be displayed The width detection for Contex CIS scanners has been improved In the scanner options the range for the settings for paper edge adjustment has been corrected In the main UI the tolerance for display of standard formats has been increased. Thereby the display of "Custom size" after a standrad size has been selcted could be avoided Limitations in print mode settings for halftoning options are eliminated QRCs as provided on Apr21, 2009 are included Copy Easy: Gamma warning when using the brightness slider has been eliminated - The information field 'Size of roll' is to be read as 'size of widest roll available' for multi-roll printers. It does not specify the size of the roll that will be used. - The default scan resolution for copying using ColorWave 600 is 300dpi in Copy Easy, but 600 dpi in Color Copy. This results in less default scan speed in Color Copy. Set to the same resolution there will be no difference in scanspeed. Releasenotes for Océ Color Copy/Océ Copy Easy Version 8.4 (Build ) Version (Build ) compared to Version 8.3 (Build ) Printers: Océ CS 2024 (Only Copy Easy) Océ CS 2124 (Only Copy Easy) Océ CS 2224 Océ CS 2236 (Only Color Copy) Océ CS 2344 (v8.4.1) Océ TCS 300 (Only Copy Easy) Océ TCS 400 (Only Copy Easy) Océ TCS 500 (Only Copy Easy) Océ TDS 300/320 (Only Copy Easy) Océ TDS 400/450 (Only Copy Easy) Océ Colorwave 600 HP DesignJet T610 24" (Only Color Copy) HP DesignJet T610 44" (Only Color Copy) HP DesignJet T " (Only Color Copy) HP DesignJet T " (Only Color Copy) HP DesignJet Z " (Only Color Copy) HP DesignJet Z " (Only Color Copy) HP DesignJet Z " (Only Color Copy) HP DesignJet Z " (Only Color Copy) HP DesignJet Z " (Only Color Copy) HP DesignJet Z " (Only Color Copy)

5 Scanners: Océ CS4236 Océ CS4336 Océ CS4336 Q Océ CS4336 S Océ CS4336 QS Océ CS4342 S Océ CS4342 QS Océ CS4354 S (v8.4.1) New Features (numbers refer to our internal database) - Added copy profiles for typical japanese media for the Océ CS New sharp smooth filters are added for the new Contex HD scanners - Océ Color Copy Ultra Lite is discontinued - Updated contex software suite (v8.4.1) - Copy profiles from Copy Easy also in Color Copy (v8.4.1) - Folding ON/OFF configurable for Copy Easy (v8.4.1) 3842 Writing of DWF in Scan-To-File When Océ Copy Easy or Color Copy is installed, instances of Océ Scanner Agent, Scan Test and Scanner Maintenance are installed as well The About window now shows the serial number of the connected scanner In Océ Color Copy the ESTE folder is now supported for Océ TCS400, TCS500 and ColorWave Océ Copy Easy supports multi roll printers now Océ Copy Easy works without dongle. You cannot enter a key code New copy profiles added for the TCS400 and TCS500 in Océ Copy Easy Due to the introduction of multi roll printers in Océ Copy Easy, a media selection box was added to the main UI The splash screens at program start for Color Copy and Copy Easy have been updated Océ Colour Copy changed to Océ Color Copy Media request for TCS300/400/500, ColorWave600 and TDS printers Océ TCS printers are now using RGB 24bit contone print modes as simple modes (and per default in Océ Copy Easy) Contex Software SCANTest is installed with Océ Software If the user chooses an uncalibrated medium or the (single roll) printer reports an uncalibrated medium a message box pops up that leads to the corresponding calibration dialogue Scanner width detection: The default for the width addon is reduced to 3mm (v8.4.1) Autorotation must be off for Copy Easy as the user cannot switch it off manually in case a folder is connected to the printer Limitation to 300dpi for CS4236 (v8.4.1) Avoid accent in App_data path (v8.4.1) Fixed Problems (numbers refer to our internal database) Improved accuracy of width detection for Contex camera scanners Enhanced filename entry for Scan-To-File The problem when mirroring in Scan-To-File mode is resolved A problem with the roll width tolerance was leading to error 'Output size too large' Backchanneling for TCS400 working correctly now When setting an AOI the software can now print while scanning even when automatic size detection is active Backchanneling for TCS400 works correctly now Automatic start of profiling wizzard

6 21664 Auto width detection for CS4236 (planned for v8.4.1) Preview in High Resolution mode faster (v8.4.1)