SOP of Advantech CODESYS RTE Runtime Package

Transcription

1 SOP of Advantech CODESYS RTE Runtime Package

2 About this document This document describes the steps of the CODESYS RTE runtime package for the Advantech X86 series products. Please perform the following steps. Step1: Check BIOS setting Some CPU configurations at BIOS menu maybe affect the real-time system efficacy. Please check the following settings have being enable/disabled. For APAX-5580: 1. Select Save & Exit tab, enable CoDeSys Support 2. Exit with saving For Advantech TPC series: Please check the following settings at BIOS configuration. (Setting names may be different, please look for similar names.) BIOS Setup Menu Advanced CPU Configuration Hyper-threading Disabled EIST Disabled Turbo Mode Disabled CPU C states Disabled Step2: Check operating system Currently the CODESYS RTE runtime only support Windows 7 with 32-bit operation system. Please check the following items. 1. Check operation system is 32-bit Windows Embedded Standard

3 2. If the operation system is not 32-bit Windows Embedded Standard (maybe win7 pro. version), please install Advantech EC driver, network driver etc. Step3: Install CODESYS key 1. Install Advantech_CodesysKeyGen_Win32_V1_00_02.msi 2. Check if there are 3 files at C:\Program Files\3S CODESYS\CODESYS Control

4 RTE3\lic Note: Please stick the license label. Step4: Install APAX-5580 Win32 I/O Driver (Option) If APAX-5580 plug the APAX-5402 series interface (2 expansion slots with APAX Bus), please install the following driver package. 1. Install APAX5580_IODRV_WIN32_V2_01.msi

5 2. Select Install this driver software anyway Step5: Install Advantech CODESYS RTE Runtime 1. Install Setup_CODESYSControlRTEV3.5SP6Patch2.exe

6 2. The CODESYS runtime package will install specific CODESYS LAN driver, please select Install this driver software anyway.

7 3. The CODESYS runtime package will install idoor CAN open driver, please select Install this driver software anyway. 4. The system will shut down after install the RTE runtime package. Please restart system.

8 Step6: Verify that the system correctly 1. Verify the CODESYS RTE runtime package version is correct. Go to the Control Panel\Programs\Programs and Features and check the version info. 2. Check the PLC status is running and licensed. You can check the status from this icon.

9 Icon PLC status License status Running Licensed Running Not licensed Stopped n/a 3. If PLC status is Stopped, please confirm the following steps Right click Computer at start menu and select Manage item.

10 3.2. Select Services and Applications Services

11 3.3. Check the following services have been installed. Otherwise, please uninstall and install the Advantech CODESYS RTE Runtime package. 4. Confirm LAN driver has been replaced successfully (For INTEL Ethernet Connection I210 Family) 4.1. Right click Computer at start menu and select Manage item.

12 4.2. Select Device Manager. Find out Network adapters and check the driver name has change to CoDeSys EtherExpress GBit PCI Ethernet Adapter.

13 4.3. Otherwise, please install LAN driver manually. (See Appendix A) Appendix A. Install LAN driver manually. 1. Uninstall the previous LAN driver. Right click the LAN driver name and select Uninstall.

14 2. Enable Delete the driver software for this device and click OK button.

15 3. Refresh device manager, find out Other devices Ethernet Controller. Right click Ethernet Controller and select Update Driver Software 4. Choose the Browse my computer for driver software.

16 5. Choose Let me pick from a list of device drivers on my computer.

17 6. Click Next button. 7. Click Have Disk button.

18 8. Click Browse button

19 9. Goto C:\Program Files\3S CODESYS\CODESYS Control RTE3\CmpEt1000MPD Select the nex541ex.inf. 10. Select CoDeSys EtherExpress GBit PCI Ethernet Adapter and click Next botton.

20 11. Choose Install this driver software anyway

21 12. Install successfully, please shut down and reboot the system.