R8xxx Upgrade or to READ THIS FIRST
|
|
|
- Peregrine Cornelius Reynolds
- 6 years ago
- Views:
Transcription
1 1 OF 14 RED THIS FIRST The procedure for updating the firmware on the R8000 and R8100 has changed significantly. Please read through the following procedure carefully before attempting to upgrade firmware. This upgrade requires the use of a 4 GB (minimum) or 8 GB (recommended) USB drive. The drive will be completely overwritten; all data on the USB drive will be lost. *** Tech support (903) Option 2, 2 *** Purpose This procedure upgrades the communications system analyzer software to The update may be applied only to systems with the following system version: or This procedure must be performed in its entirety for the update to apply correctly. This upgrade requires the use of a 4 GB (minimum) or 8 GB (recommended) USB drive. The drive will be completely overwritten; all data on the USB drive will be lost. This procedure uses a third-party, open-source utility, Rufus (v.2.17), to write the downloaded drive image (ISO file) onto the USB drive. Information about this tool is available at This software is released under the GNU General Public License (GPL) version 3. copy of the executable is included in the downloaded ZIP file. Upgrade Procedure Overview USB Drive Setup on PC o Download ZIP file and extract contents to PC o Open Rufus utility, configure and burn ISO image to USB drive o Verify upgrade USB drive readiness and eject from PC Instrument Upgrade o Start R8xxx upgrade process o Boot from USB drive to install upgrade o Remove USB drive; finish upgrade and cleanup
2 2 OF 14 Conventions Used Soft Key Vertical and horizontal buttons along the edge of the communications system analyzer LCD screen. WRNING PERFORM THESE STEPS WITH THE COMMUNICTION SYSTEM NLYZER POWERED BY N UNINTERRUPTBLE POWER SUPPLY (UPS). IF POWER IS LOST DURING N UPDTE, IT IS POSSIBLE TO DMGE THE NLYZER IN MNNER THT REQUIRES FCTORY REPIR. WRNING THIS PROCEDURE REQUIRES USB THUMB DRIVE WITH CERTIN SECURITY FETURES DISBLED (FOR EXMPLE, PSSWORD PROTECTION). THE COMMUNICTION SYSTEM NLYZER IS NOT CONFIGURED TO SUPPORT SUCH SECURITY FETURES. NOTE THESE INSTRUCTIONS CONCERN UNPCKING.ZIP FILE USING WINDOWS BUILT IN ZIP FILE EXTRCTION. IF OTHER TOOLS RE USED TO UNPCK.ZIP FILES, CERTIN PORTIONS OF THE PROCEDURE MY NEED TO BE LTERED. WRNING WHEN REMOVING USB DRIVE FROM COMPUTER, IT IS USULLY CRITICL TO USE SFELY REMOVE HRDWRE FETURE TO PREVENT CORRUPTION OF FILES COPIED TO THE DEVICE.
3 3 OF 14 USB Drive Setup on PC STEP 1: Download and Extract the USB Files Download: From the FREEDOM website upgrades page click the link labeled R8100/R8000 update to to begin the download of the following ZIP file: R8000_Update_ _ zip Extract: See ppendix for help extracting the contents of the ZIP archive file. The ZIP file contains two files: R8000_Update_ _ iso (drive image for the USB) Rufus-2.17.exe (Utility to burn the ISO file to the USB drive) Copy or extract these two files to a location of your choice on the PC and navigate to that location. *** DO NOT PLCE THESE FILES ON THE USB DRIVE *** STEP 2: Burn the ISO File to the USB Drive. NOTE: The Rufus utility will only run on Microsoft Windows. If you are using a different operating system, you will need to find and use an equivalent tool to burn the ISO file to the USB drive. Open: Double-click on the Rufus-2.17 file to start the Rufus utility. Depending on your operating system, you may be asked to allow the utility to run or to let it check for updates.
4 4 OF 14 The following window will appear: Configure: Device: Select the USB Drive you want to use for the upgrade Partition scheme and target system type: Select MBR partition scheme for BIOS or EUFI-CSM
5 5 OF 14 File system: Select FT32 Cluster size: Select Default (The size may vary based on drive size) New volume label: This can be anything you want Format Options: o [Unchecked] Check Device for Bad Blocks o [Checked] Quick Format o [Checked] Create a bootable disk using ISO Image Click the disk icon and select the file R8000_Update_ _ iso o [Checked] Create extended label and icon files Your Rufus application window should look like the image above. Burn: fter verifying all settings are correct, click Start to burn the ISO image onto the USB drive. You will be prompted to confirm you want to erase all files on the USB drive and replaced them with the upgrade files. In Progress Complete. Click Close to exit Rufus utility.
6 6 OF 14 STEP 3: Verify the Update USB Drive and Eject. Verify: Open the USB drive in File Explorer to view its contents. The USB drive root directory should look like the following image: Eject: Use Safely Remove Hardware controls to when ready to remove the USB drive from the computer. Details on how to do this vary by operating system and desktop configuration. For non-windows operating systems, this is sometimes referred to as unmounting or ejecting the media. Refer to ppendix B for some examples how to Safely Remove Hardware on a PC that has one of several Microsoft Windows operating systems installed. Unplug the USB drive from the PC. USB drive preparation is complete. Proceed with instrument upgrade. CUTION: In this state, the USB drive is a bootable drive that should only be used to upgrade an R8000 or R8100. DO NOT boot from this drive on a PC. This may result in data loss on the PC. fter use, this USB drive should be formatted to make it non bootable and safe to use for other purposes.
7 7 OF 14 Instrument Upgrade 1. Power up the analyzer using the green power button. 2. Wait approximately one minute for the analyzer boot sequence to complete. While the product is booting a Loading Configuration File Please Wait message is shown in the product display status bar. Do not proceed to the next step until the message disappears from the status bar. 3. Insert a USB drive prepared using the USB Drive Setup on PC procedure into an available USB port located on the front or side of the analyzer. 4. Wait about 30 seconds to allow the analyzer to identify the USB drive. If the USB drive has a light on it, several seconds after insertion, the light blinks rapidly for a short period of time. Depending on the USB drive type, the system indicates that identification is complete by either extinguishing the light or by transitioning it from a rapid blink to a slow, periodic blink pattern. 5. Press the blue <Settings> button located on the analyzer front panel. 6. Press the bout soft key. 7. Verify that the current System version is or Press the Search for Updates soft key. a. n IMMEDITE CTION REQUIRED message panel is shown. If the message panel is not shown, either the analyzer does not recognize that the USB drive is installed, or the USB drive preparation described in the USB Drive Setup on PC section was not successful. In some cases, using a different brand or model of USB drive may be helpful. b. Press the Continue soft key to proceed with the update process. c. Wait for a second IMMEDITE CTION REQUIRED message panel to be shown after the update files have transferred from the USB drive to the analyzer. During this time, the standard operating menu is visible. While it may appear that the system is not processing the update, there is no need to navigate away from the settings screen or to press additional controls. IMPORTNT: USB drive light activity ceases prior to completion of the transfer. Do not assume that the transfer has failed if the second panel does not appear immediately after the drive appears inactive. If the panel fails to appear, a file on the USB drive is corrupt, or could not be processed, a red status bar : code = <x> message appears.
8 8 OF 14 The update procedure must be restarted if the transfer fails. It may be sufficient to re-run the USB Drive Setup on PC procedure using files previously obtained from the web site, but it may be necessary to download the files again if they are corrupted. In some cases, use of a different brand or model of USB drive may be helpful. d. Unplug all USB devices from the analyzer. e. Press the Continue soft key to apply the update. 9. Wait for the system software upgrade to begin. The analyzer automatically reboots twice and then displays an Upgrade in progress message. The following section is new in this upgrade. Please proceed step-by-step to avoid confusion or errors. 10. prompt appears requesting that the USB drive be reinserted. n Ok button is displayed. Press the ENTER key on the front of the unit to continue. 11. The unit will reboot into Linux and copy the update to the unit. 12. prompt will appear indicating the USB drive should be removed. The unit will detect that the USB drive is gone and will reboot. 13. The screen will display an Upgrade in progress message. 14. Wait for the system software upgrade to complete. The unit will reboot four (4) times during this process. When the upgrade is complete, the analyzer displays the standard user interface and resumes normal operation. This concludes the new instructions. The unit should be fully upgraded. Proceed to verification. 15. Verify that the product has finished rebooting. While the product is booting a Loading Configuration File Please Wait message is shown in the product display status bar. Do not proceed to the next step until the message disappears from the status bar. 16. Press the blue <Settings> button. 17. Press the bout soft key. 18. Verify that the System version has changed to
9 9 OF Press the Versions soft-key and review the list of versions. Note: Your BIOS and PCB numbers may vary based on instrument hardware NOTE: If any version number is , an additional reboot may be required to return the unit to normal operation. 20. The upgrade is complete. 21. You may use the USB to upgrade multiple instruments. 22. Once you are done with the USB drive, place it in the PC, right click the drive, and format it. This step will allow you to use the drive for other purposes. If you should need technical assistance before, during, or after this upgrade, please call out Technical Support hotline at (903) and select Option 2 Product Support followed by Option 2 Technical Support. (Option 1 will connect you with our Service Department if you need calibration or repair services.) For urgent support: West: Doyle Wofford (602) East: Chuck Cox (903) sia: Keith Yeo +65 (9155) 1168 Latin merica: Luis Riano (954)
10 10 OF 14 ppendix : Extracting Files from a ZIP rchive The procedure for extracting files from the.zip file varies from system to system, particularly when a third-party archive/unarchive tool is installed, but, for reference, a number of.zip extraction scenarios for using a built-in Windows file extraction tool are documented below: Windows 10 / Windows 8.1 Select R8000_Update_ _to_ zip by clicking it once. Compressed Folder Tools Extract menu ribbon should appear, but if it is not shown ( Extract all is not visible), click the Extract menu tab to reveal it. Click Extract all in the Extract menu ribbon. When an Extract Compressed (Zipped) Folders pop-up appears, modify the path that appears in an edit box below Files will be extracted to this folder. Select a folder location on the PC where the files will be used in the next step. Check Show extracted files when complete, then click the Extract button at the bottom of the pop-up window. Windows 7 Either right-click R8000_Update_ _to_ zip and select Extract all, or, double-click the.zip file and click Extract all files on the task ribbon beneath the title bar. lternatively, use File Extract all from the command menu next to the title bar. The <lt> key toggles visibility of the command menu. When an Extract Compressed (Zipped) Folders pop-up appears, modify the path that appears in an edit box below Files will be extracted to this folder. Select a folder location on the PC where the files will be used in the next step. Check Show extracted files when complete, then click the Extract button at the bottom of the pop-up window. Windows XP Double-click R8000_Update_ _to_ zip to reveal Folder Tasks in the explorer window. If Folder Tasks appears, click "Extract all files". File Extract ll... from the command menu. lternatively, use
11 11 OF 14 When the Compressed Folders Extraction Wizard appears, click the Next button. In the window called Extraction Wizard, click the Browse button and select a folder location on the PC where the files will be used in the next step. Press the OK button. Press Next (to extract the files to the USB drive). Ensure that the Show extracted files checkbox is checked. Press the Finish button.
12 12 OF 14 ppendix B: Safely Remove Hardware Examples Examples of safe removal of USB storage are provided below, but the procedure can vary significantly per installed operating system and desktop configuration. Windows 10 s needed, move the mouse pointer over a Show hidden icons widget, then click the icon to expose the Safely Remove Hardware and Eject Media icon. Move the mouse pointer over the Eject USB Mass Storage Device widget for the drive letter of the USB media, then click it. Wait for a Safe To Remove Hardware notification near the Safely Remove Hardware and Eject Media icon.
13 13 OF 14 Windows 8.1 On Windows 8.1, extra steps are sometimes needed to show the start bar where the system tray is found. Either use the keyboard Windows key to select a desktop with a start bar, or, swipe the mouse pointer to the lower left corner of the desktop to reveal a Windows button that, when clicked, acts like the Windows keyboard key. Windows 7 / 8.1 s needed, move the mouse pointer over a Show hidden icons widget, then click the icon to expose the Safely Remove Hardware and Eject Media icon. Move the mouse pointer over the Safely Remove Hardware and Eject Media icon, click it to expose an Eject USB Mass Storage Device widget. Move the mouse pointer over the Eject USB Mass Storage Device widget for the drive letter of the USB media, then click it.
14 14 OF 14 Wait for a Safe To Remove Hardware notification near the Safely Remove Hardware and Eject Media icon. Windows XP s needed, move the mouse pointer over a Show hidden icons widget, then click the icon to expose the Safely Remove Hardware icon. Move the mouse pointer over the Safely remove Hardware icon, click it to expose a Safely remove USB Mass Storage Device widget. Move the mouse pointer over the Safely remove USB Mass Storage Device widget that mentions the drive letter of the USB media, then click it. Wait for a Safe to Remove Hardware notification near the Safely remove Hardware icon. Initial Release Rev C. Cox 10/23/17. Parker 10/23/17 Change/Rev. No. Revised By Date pproved By Date ECO#
R8xxx Upgrade to
1 OF 10 Purpose This procedure upgrades the communications system analyzer software to 3.2.0.0. The update may be applied only to systems with the following system version: 3.1.0.0 This procedure must
R8xxx Upgrade to
1 OF 9 Purpose This procedure upgrades the communications system analyzer software to 2.1.1.0. The update may be applied only to systems with the following system version: 2.0.0.0 This procedure must be
R8xxx Upgrade Standard Procedure
1 OF 12 Purpose This procedure upgrades the communications system analyzer software utilizing the Standard upgrade procedure. R8xxx updates may be applied only to systems that match the version number
R8000 Upgrade to
1 OF 5 Purpose This procedure upgrades the communications system analyzer software to 1.13.0.0. The update may be applied only to systems with the following system version: 1.12.3.0 This procedure must
Computer Essentials Session 1 Lesson Plan
Note: Completing the Mouse Tutorial and Mousercise exercise which are available on the Class Resources webpage constitutes the first part of this lesson. ABOUT PROGRAMS AND OPERATING SYSTEMS Any time a
Instructions for Installing FlashUpdate and Downloading Updates for NPRT 2200 Noise Power Ratio Test Set
Instructions for Installing FlashUpdate and Downloading Updates for NPRT 2200 Noise Power Ratio Test Set Updates to the instrument firmware are available from the Applied Instruments website. Requirements
Super USB. User Manual. 2007, March
Super USB User Manual 2007, March Windows98 Driver Install/Uninstall Driver Install: 1. Execute Win 98 UFD driver, then restart PC. 2. Plug Super USB into an available USB port. A new Removable Disk drive
INSTALLING THE PS3 XBOX READY SOFTWARE:
INSTALLING THE PS3 XBOX READY SOFTWARE: 1. Insert the Installation CD to CD-ROM drive and execute Ready_Setup.exe NOTE: If it is the first time for the target USB disk using under this software, the software
User s Manual. Rev July 29,
User s Manual Rev. 3.3.0.75 July 29, 2009 www.comsol.com.au Contents 1. Introduction...2 1.1 System Requirements... 2 1.2 Multilingual Support... 2 1.3 Disk Partitioning... 2 1.4 Note... 3 2. Icon Descriptions...4
NEC Versa 4200 Windows 98 Upgrade Information
NEC Versa 4200 Windows 98 Upgrade Information Follow the instructions provided in this document to upgrade your NEC Versa 4200 system to Microsoft Windows 98. Please read these notes in their entirety.
Flash USB Drive. HwaZu Disk User Manual. Product Image File
Flash USB Drive HwaZu Disk User Manual Product Image File Version 1.33 Table of Contents Introduction System Requirements Functions I. Install II. Formatting II-1 When Formatting II-2 Do Formatting III.
Contents. Getting Started...1. Managing Your Drives...9. Backing Up & Restoring Folders Synchronizing Folders...52
Contents Getting Started.....................................................1 Installing the Software...........................................1 Using the Maxtor System Tray Icon................................6
Making a Bootable Linux USB Flash Drive with the Universal USB Installer.
Making a Bootable Linux USB Flash Drive with the Universal USB Installer. Insert the target USB flash drive into the USB port before starting the installer program. This is the start up screen for the
Tutorial How to upgrade firmware on Phison S8 controller MyDigitalSSD using a Windows PE environment
Tutorial How to upgrade firmware on Phison S8 controller MyDigitalSSD using a Windows PE environment Version 8.1 This tutorial will walk you through how to create a bootable USB drive to enter into a WINPE
TSM800 / TSM1330 Update Instructions
TSM800 / TSM1330 Update Instructions Contents Contents... 1 Automatic Updates... 1 Manual Update to the Latest Version of N2KView... 2 Manual Update of the Complete Operating System... 3 Automatic Updates
NEC Versa 500D/550D Windows 98 Upgrade Information
NEC Versa 500D/550D Windows 98 Upgrade Information Follow the instructions provided in this document to upgrade your NEC Versa 500D/550D system to Microsoft Windows 98. Please read these notes in their
Tutorial - How to upgrade firmware on Phison S9 controller MyDigitalSSD using a Windows PE environment
Tutorial - How to upgrade firmware on Phison S9 controller MyDigitalSSD using a Windows PE environment Version 1.9 This tutorial will walk you through how to create a bootable USB drive to enter into a
Sun VirtualBox Installation Tutorial
Sun VirtualBox Installation Tutorial Installing Linux Mint 5 LTS Guest OS By Dennis Berry Welcome to the world of virtualization and Linux. This tutorial is intended to help users who are new to the world
GV Director Restoring USB Image / Frame and Panel Installation
IMPORTANT NOTE: If you have already been provided this update package via USB by a Grass Valley service representative, please skip ahead and begin on page 4. Requirements: 16 GB USB FLASH OR LARGER Mouse
Physical Imaging Rapid Recovery - Bare Metal Restore
Physical Imaging Rapid Recovery - Bare Metal Restore Applicable Products These instructions apply to the following products: - MSP Overview Bare Metal Recovery (BMR) allows you to restore a physical image
MBB100 / DSM800 Update Instructions
MBB100 / DSM800 Update Instructions Contents Contents... 1 Automatic Updates... 1 Manual Update to the Latest Version of N2KView... 2 Manual Update of the Complete Operating System... 3 Automatic Updates
Tutorial How to upgrade firmware on Phison S5 controller MyDigitalSSD.
Tutorial How to upgrade firmware on Phison S5 controller MyDigitalSSD. Version 1.0 This tutorial will walk you through how to create a DOS bootable USB drive and how to apply the newest firmware S5FAM012
Tutorial How to upgrade firmware on Phison S9 controller MyDigitalSSD using a Windows PE environment
Tutorial How to upgrade firmware on Phison S9 controller MyDigitalSSD using a Windows PE environment Version 1.6 This tutorial will walk you through how to create a bootable USB drive to enter into a WINPE
M2GO & M1 Operating System Installation
M2GO & M1 Operating System Installation Download USB Flash preparation Installation Supplied by: Author Kris Van Hullebusch July 10, 2012 Date Martin M2GO & M1 OS installation (Rev. A) Revision History
OS Installer. Installation Instructions
OS Installer These instructions are only relative to Digital X Bus X.200 owners needing to completely clean out their internal hard drive and re-install the entire operating system and the latest Digital
Instructions for Installing FlashUpdate and Downloading Updates for Super Buddy Satellite Meter
Instructions for Installing FlashUpdate and Downloading Updates for Super Buddy Satellite Meter Updates to the Field Guide and to the instrument firmware are available from the Applied Instruments website.
Instrument Software Update Instructions. X-Series Multi-touch instruments
Purpose Instrument Software Update Instructions X-Series Multi-touch instruments The purpose of this document is to outline the instrument software update procedure for the touchscreen or B model instrument
Contents. 1 Drobo 5C Online User Guide Before You Begin Product Features at a Glance Checking Box Contents...
Drobo 5C User Guide Contents 1 Drobo 5C Online User Guide... 6 1.1 Before You Begin... 7 1.1.1 Product Features at a Glance... 8 1.1.2 Checking Box Contents... 10 1.1.3 Checking System Requirements...
HOW TO: Perform a Hardware Independent Restore (HIR)
Document ID:00000184 Last Modified:12/12/2008 HOW TO: Perform a Hardware Independent Restore (HIR) Key Words: How to, HIR, Hardware independent restore, recovery Situation: The purpose of this document
LENOVO THINKSTATION P520C, P520, P720, & P920 WINDOWS 10 INSTALLATION
LENOVO THINKSTATION P520C, P520, P720, & P920 WINDOWS 10 INSTALLATION Contents OVERVIEW SECTION 1 BIOS & PRE-INSTALLATION STEPS SECTION 2 WINDOWS 10 INSTALLATION SECTION 3 WINDOWS 10 UPGRADE USING MEDIA
Image Backup and Recovery Procedures For Windows 7
Image Backup and Recovery Procedures For Windows 7 Thank you for purchasing a Fujitsu computer. Fujitsu is committed to bringing you the best computing experience with your new system. It is very important
remember where it is, My Documents or to the Desktop are good locations. If you do not have an extract option, you can usually just COPY and PASTE the
How do I install USB drivers? This FAQ topic covers how to install your USB drivers. Step 1: Unzipping the Drivers When you download the drivers they are in a zip file. This is a type of file which allows
Peerless Drive System User's Manual
Peerless Drive System User's Manual Copyright 2001 Iomega Corporation Iomega, the stylized "i" logo, Peerless, and the Peerless brand block are either registered trademarks or trademarks of Iomega Corporation
INSIGHT Installation Instructions
This is the New Icon that will appear on your computer screen after the INSIGHT v8.1 software is installed. IMPORTANT: These instructions pertain to version 8.1.29. INSIGHT v8.1.29 requires Windows 8,
Instrument Software Update Instructions
Purpose Instrument Software Update Instructions Keysight X-Series Signal Analyzers, Non-Touch (N9000A, N9010A, N9020A, N9030A) With either WES7 or Windows 10 operating systems The purpose of this document
TouchKit Touch Panel User manual for WindowsNT4 Version: 3.1.4
TouchKit Touch Panel User manual for WindowsNT4 Version: 3.1.4 TouchKit Touch Panel v3.1.4 0 CONTENT CHAPTER 1. TOUCH PANEL CONTROLLER...2 1.1 CONTROLLER...2 1.2 SPECIFICATIONS AND FEATURES...3 CHAPTER
TouchKit Touch Panel User manual for WindowsNT4 Version: 3.1.4
TouchKit Touch Panel User manual for WindowsNT4 Version: 3.1.4 TouchKit Touch Panel v3.1.4 0 CONTENT CHAPTER 1. TOUCH PANEL CONTROLLER... 2 1.1 CONTROLLER... 2 1.2 SPECIFICATIONS AND FEATURES... 3 CHAPTER
X35 Apollo System Upgrading Monitor Software & ECU Firmware Version
X35 Apollo System Upgrading Monitor Software & ECU Firmware Version 4.01.509 New X35 equipped tanks and drills for 2018 will require software and firmware as listed below. If software and firmware are
X35 Apollo System Upgrading Monitor Software & ECU Firmware Version
X35 Apollo System Upgrading Monitor Software & ECU Firmware Version 4.01.508 4.01.508 http://download.bourgault.com 4.01.508 1. Download zip file attachment to a folder on your computer. File name will
How to install the software of ZNS8022
How to install the software of ZNS8022 1. Please connect ZNS8022 to your PC after finished assembly. 2. Insert Installation CD to your CD-ROM drive and initiate the auto-run program. The wizard will run
MAXTOR ONETOUCH III MINI EDITION. User s Guide
MAXTOR ONETOUCH III MINI EDITION User s Guide MAXTOR ONETOUCH III MINI EDITION USER S GUIDE Contents Windows Installation Introduction.................................................... 1 About this Guide...............................................
Instruction Sheet Updating SmartPAC 2 Firmware
Instruction Sheet Updating SmartPAC 2 Firmware This document shows you how to update SmartPAC 2 firmware, using a USB disk, and load SmartPAC 2 firmware installed on a replacement Compact Flash (CF) card.
Fiery proserver User Guide
Fiery proserver User Guide Congratulations on your purchase of the EFI Fiery proserver, a powerful production solution for your printer. Before you begin Make sure that you have: About this document Installed
Overview of USB Flash Drive Based Install Instructions
Overview of USB Flash Drive Based Install Instructions WARNING: Installing any Image completely wipes out ALL data and settings including printer drivers which must be re-installed. SAVE ALL DATA BEFORE
Storing Your Exercise Files
Storing Your Exercise Files This appendix contains an overview for using this book with various file storage media, such as a USB flash drive or hard drive. Detailed instructions for downloading and unzipping
Installation of fi-4110cu Scanner under Windows 2000
Installation of fi-4110cu Scanner under Windows 2000 Connect the scanner to the PC. Turn on the scanner and then the PC Log into Windows Note: The user must log in with administrator authority. For information
Install and setup TrueCrypt
Install and setup TrueCrypt Install and setup TrueCrypt This guide is for organisations and individuals who wish to use TrueCrypt to secure their computer(s) and/or portable USB drives. It explains how
LENOVO THINKSTATION P520C, P520, P720, & P920 WINDOWS 7 INSTALLATION
LENOVO THINKSTATION P520C, P520, P720, & P920 WINDOWS 7 INSTALLATION Contents OVERVIEW SECTION 1 BIOS & PRE-INSTALLATION STEPS SECTION 2 WINDOWS 7 DRIVER SLIPSTREAM SETUP SECTION 3 WINDOWS 7 INSTALLATION
Public Software Patch Release Notes
Public Software Patch Release Notes Software version: 2.1.9945 Released on: 13 July 2012 Supersedes version: 2.1.9596 Released on: 7 May 2012 Software Release Notification Application installation packages
Procedures to Install Eye Com's ImageMouse and ImageMouse Plus using Windows XP platform
Procedures to Install Eye Com's ImageMouse and ImageMouse Plus using Windows XP platform 8-08-2005 The ImageMouse runs on the XP platform provided it is set up using NTFS, has the latest XP service pack
Product Instruction. Drew3 Control Assay Data File Internet Download and Installation Instructions
Product Instruction Drew3 Drew3 Control Assay Data File Internet Download and Installation Instructions Purpose: This document provides instructions for the Internet download and installation of the Drew3
U-Storage User s Manual. Version 2.3
U-Storage User s Manual Version 2.3 Introduction Thank you for purchasing the U-Storage device. The manual explains how to use the U-Storage software bundled with the device. Safety Precautions Please
Where Did My Files Go? How to find your files using Windows 10
Where Did My Files Go? How to find your files using Windows 10 Have you just upgraded to Windows 10? Are you finding it difficult to find your files? Are you asking yourself Where did My Computer or My
Exporting a VM to a USB Mass Storage Device
Exporting a VM to a USB Mass Storage Device Version 5.1.0 March 26, 2014 Table of Contents About this Guide...3 Export a Virtual Machine using XenClient Enterprise Synchronizer...3 About VM Image Assignment...
EaseUS Disk Copy User Guide
EaseUS Disk Copy User Guide Table of contents Welcome... - 1 - Glossary... - 1 - Getting Started... - 1 - Hardware Requirements... - 1 - System Requirements... - 1 - File System Supported... - 2 - Devices
Computer Basics. Hardware. This class is designed to cover the following basics:
Computer Basics This class is designed to cover the following basics: computer hardware software computer s operating system different kinds of storage devices you can use to save files using a mouse what
MCS-TOUCHSCREEN Auto Disk Clean up
APP093 - MCS-Touchscreen Error 16 Auto Diskcleanup Procedure Micro Control Systems APPLICATION NOTE APP-093 MCS-TOUCHSCREEN Auto Disk Clean up Revision History Date Author Revision Description 07/31/2014
EZ Drive USB Flash Disk
EZ Drive USB Flash Disk User Manual Version 2.33 2002/10/31 Version: 2.33 TABLE OF CONTENTS 1 Introduction... 04 1.1 Features... 04 1.2 Specification... 04 1.3 Accessories... 05 2 Safe Precautions... 05
Serial ATA PCI RAID Quick Installation Guide
Serial ATA PCI RAID Quick Installation Guide Introducing the Serial ATA PCI RAID The Serial ATA PCI RAID is an ultra high-speed two channel Serial ATA controller board for use in Pentium-class computers.
Manual Format Flash Drive Ntfs Windows Xp
Manual Format Flash Drive Ntfs Windows Xp Windows XP, NTFS, Flash Drive, Format I am given the option of formatting the flash drive when I right-click on it, but I am not given any options, just drop.
HOW TO: Upgrade Windows XP to Windows 7 with Windows Easy Transfer
HOW TO: Upgrade Windows XP to Windows 7 with Windows Easy Transfer Upgrade Windows XP to Windows 7 with Windows Easy Transfer Upgrade option for XP users like Windows Vista. In addition, if you completely
Getting Started. Here's how to get started using your Zip 250 drive: 1. Unpack the Zip 250 drive and accessories.
Getting Started IMPORTANT! Before installing or using your Zip 250 drive, read and follow the USB guidelines to ensure reliable performance of your USB devices. Here's how to get started using your Zip
Basic Software Maintenance. Ham Station Ultra Software Package
1 Carl Skip Glover, Jr. K1SPG Custom Software & Hardware Solutions 4 Valley of Industry Boscawen, NH 03303 (603) 369-7015 Email: pctech.skip@gmail.com Email: k1spg@arrl.net Basic Software Maintenance Ham
Windows Xp Installation User Manually Create Bootable Usb Flash Drive
Windows Xp Installation User Manually Create Bootable Usb Flash Drive To create a bootable USB drive manually, we will use the Command Prompt as by step to create a bootable USB drive as the Windows installation
Imaging your Classmate (Veteran Image
Imaging your Classmate (Veteran Image Download) This document describes the procedure for creating a bootable USB drive to restore the 2017 FRC image on a Classmate computer. Note that Veteran teams are
TouchKit Touch Panel User manual for Windows9X/ME Version: 3.1.4
TouchKit Touch Panel User manual for Windows9X/ME Version: 3.1.4 TouchKit Touch Panel v3.1.4 0 CONTENT CHAPTER 1. TOUCH PANEL CONTROLLER... 2 1.1 CONTROLLER... 2 1.2 SPECIFICATIONS AND FEATURES... 3 CHAPTER
Intelligent Tiered Storage Acceleration Software for Windows 10
for Windows 10 QUICK START GUIDE April 2018 2018 Advanced Micro Devices, Inc. All rights reserved. AMD, the AMD logo, Ryzen, Threadripper, and combinations thereof are trademarks are of Advanced Micro
INSTALLING WINDOWS ON YOUR MAC USING BOOT CAMP C188 TUTORIAL Fall, 2016
INSTALLING WINDOWS ON YOUR MAC USING BOOT CAMP C188 TUTORIAL Fall, 2016 1. Back up your computer to an external drive, and plug in your computer. You will also need a blank USB drive of at least 16GB in
Drobo 5D3 User Guide
Drobo 5D3 User Guide 1 Drobo 5D3 User Guide... 6 2 Before You Begin... 7 2.1 Product Features at a Glance... 7 2.2 Checking Box Contents... 8 2.3 Checking System Requirements... 9 2.3.1 Operating Systems
3 USING NERO BURNING ROM
3 USING NERO BURNING ROM Nero Burning ROM gives you the maximum amount of flexibility and options for burning data to create different types of CDs and DVDs, such as bootable CDs or Super Video CDs. Until
Serial ATA PCI RAID Quick Installation Guide
Serial ATA PCI RAID Quick Installation Guide Introducing the Serial ATA PCI RAID The Serial ATA PCI RAID is an ultra high-speed two channel Serial ATA controller board for use in Pentium-class computers.
Macrorit Partition Expert 4.3.5
Content Macrorit Partition Expert 4.3.5... 1 User Manual... 1 Welcome... 1 About Macrorit Partition Expert... 1 Main Features... 1 Advanced Features... 1 Tools... 2 Unique Technology... 2 System Requirements:...
SOHOTANK ST4-TB User Manual
SOHOTANK ST4-TB User Manual Introduction SOHOTANK ST4-TB User Manual Thank you for purchasing STARDOM products. This manual will introduce the ST4 Series. Before using your ST4, please read this manual
2. install windows vista
2. install windows vista Windows Vista comes preloaded on many brand-new PCs. If you already have a computer with Windows Vista installed, you can go directly to Chapter 3, Move from another PC. If you
USB SERIAL ADAPTOR COM PORT INSTRUCTIONS
USB SERIAL ADAPTOR COM PORT INSTRUCTIONS No part of this work covered by the copyright hereon may be reproduced, copied, transferred or distributed in any form or by any means -- graphic, electronic, or
VMware Workstation 4 What s New Requirements Installation Guest OS Installation Documentation Troubleshooting Prev Contents Last Next Installing VMware Tools The following sections describe how to install
Agilent 971-FP. Software Installation Instructions
Software Installation Instructions This document contains installation and upgrade procedure for the Agilent 971-FP Flash Purification Software v3.2. Introduction This document describes how to install
Zebra ET5X Windows 10 Upgrade Instructions: Contents. Version 3.0
Zebra ET5X Windows 10 Upgrade Instructions: Contents Introduction... 2 Creating Installation USB Stick... 2 Using ET5X Comm Cradle... 3 Using USB Hub... 4 Updating OS... 4 Checking the versions... 121
TouchKit TouchScreen Controller User Manual for Windows NT4 Version: 3.4.0
TouchKit TouchScreen Controller User Manual for Windows NT4 Version: 3.4.0 1 CONTENT CHAPTER 1. TOUCH PANEL CONTROLLER 2 1.1 Controller 2 1.2 Specifications and Features 3 CHAPTER 2. INSTALLING TOUCHKIT
IRONKEY D300S SECURE USB 3.0 FLASH DRIVE
IRONKEY D300S SECURE USB 3.0 FLASH DRIVE User Guide Document No. 48000130-001.A01 D300S Page 1 of 27 Table of Contents About This Manual... 3 System Requirements...3 Recommendations...3 Setup (Windows
Imaging your Classmate (Veteran/Rookie Image
Imaging your Classmate (Veteran/Rookie Image Download) This document describes the procedure for creating a bootable USB drive to restore the 2014 FRC image on a Classmate computer. Note that Veteran teams
L AB: W I N D O W S 7 V I R T U A L I Z A T I O N
Revision Date: 5/31/2013 Time 1.0 Hours O V E R V IEW In this lab, you will set up a Virtual PC Environment that you can configure at home to complete the lab activities in this course. L AB ACTIVIT IES
Lionstracs Groove X-R
Lionstracs Groove X-R Groove OS version 5.3 Installation & Upgrade Guide 31 October 2011 English Language documentation prepared by Corcyra Global in consultation with Lionstracs Table of Contents Warning
A. Windows 7 and USB driver installation
DE173 First Edition October 2016 A. Windows 7 and USB driver installation Based on the chipset specification, your system requires the USB driver to be preloaded in order to use USB keyboard/mouse during
User Manual. AOMEI Partition Assistant 6.0
AOMEI Partition Assistant 6.0 User Manual Welcome... 3 About AOMEI Partition Assistant... 3 Working Computer Configuration... 4 Product Main Window... 5 Partition Operation Properties... 5 Partition Operations...
Instructions for MX350 Firmware Upload
Instructions for MX350 Firmware Upload MX350 Document AN10048 Page 1 of 39 Contents Section Description Page 1 Requirements 3 2 Install MX350 Setup Software 3 3 Download MX350 Firmware 4 4 Connect MX350
USBest Technology Inc.
UT163 USB2.0 Flash Disk Controller Mass Production Tool User Manual Version 1.1 DECEMBER 25, 2006 Technical Marketing Dept. Page 1 of 13 Copyright by, all rights reserved. System Requirements: 1. OS: Windows
Quick Guide. Full Install on Hog 4 OS Consoles Jan 4, 2017
Quick Guide High End Systems Full Install on Hog 4 OS Consoles Jan 4, 2017 Rev C PAGE 1/5 You may occasionally need to do a full install of the Hog 4OS on your console. A full install is not typically
TouchKit TouchScreen Controller User Guide for Windows NT4 Version: 3.2.1
TouchKit TouchScreen Controller User Guide for Windows NT4 Version: 3.2.1 TouchKit Guide for WinNT4 v3.2.1 0 CONTENT CHAPTER 1. TOUCH PANEL CONTROLLER... 2 1.1 CONTROLLER... 2 1.2 SPECIFICATIONS AND FEATURES...
USER MANUAL TOUGH DRIVE EXTERNAL MOBILE HARD DRIVE / 2.5" / USB 2.0. Rev. 848
USER MANUAL TOUGH DRIVE EXTERNAL MOBILE HARD DRIVE / 2.5" / USB 2.0 Win & Mac Rev. 848 Freecom ToughDrive Dear user! Thank you for choosing the Freecom ToughDrive as an external hard drive. For optimal
Dell EMC Repository Manager Version 3.1. Troubleshooting Guide
Dell EMC Repository Manager Version 3.1 Troubleshooting Guide Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION
JetFlash User s Manual
JetFlash User s Manual ( Version 1.0 ) Table of Contents INTRODUCTION...1 PACKAGE CONTENTS...1 FEATURES...1 SYSTEM REQUIREMENTS...1 DRIVER INSTALLATION...2 DRIVER INSTALLATION FOR WINDOWS 98SE...2 DRIVER
NOTE: This update is not approved for Case IH users. This update is only valid if using ROS 2.x and higher. If updating from ROS
VIPER 4 SOFTWARE UPDATE DOWNLOAD INSTRUCTIONS NOTE: This update is not approved for Case IH users. This update is only valid if using ROS 2.x and higher. If updating from ROS 1.x or older, first update
Wavestore VMS v6 Installation Instructions
Wavestore VMS v6 Installation Instructions Updated January 2019 at Version 6.14 Page 1 Table of Contents 1. Introduction... 3 2. Upgrading from a previous V6 version to a later V6 version... 4 2.1 Checking
Predator Revision Update Instructions PREP:
Predator Revision Update Instructions (for Trinity, please see Trinity Update Instructions): PREP: You Need USB/Serial Cable and Power Source #U7778 OR Serial/Serial Cable and Power Source #U7777 (For
Tutorial How to upgrade firmware on Phison S8 controller MyDigitalSSD
Tutorial How to upgrade firmware on Phison S8 controller MyDigitalSSD Version 1.4 This tutorial will walk you through how to create a bootable USB drive and how to apply the newest firmware 4.6 to your
Installation. Installation 1
Installation 1 Installation The SP35 printer is easy to install and use. It is also flexible; you can connect and use it in many different ways. Most often, one printer is connected to one PC. However,
TouchKit TouchScreen Controller User Guide for Windows 2000 / XP Version: 3.2.4
TouchKit TouchScreen Controller User Guide for Windows 2000 / XP Version: 3.2.4 TouchKit Guide for Win2000/XP v3.2.4 0 CONTENT CHAPTER 1. TOUCH PANEL CONTROLLER...2 1.1 CONTROLLER...2 1.2 SPECIFICATIONS
FuzeDrive. User Guide. for Microsoft Windows 10 x64. Version Date: June 20, 2018
for Microsoft Windows 10 x64 User Guide Version 1.3.4 Date: June 20, 2018 2018 Enmotus, Inc. All rights reserved. FuzeDrive, FuzeRAM and vssd are a trademarks of Enmotus, Inc. All other trademarks and
Technical Tip How to Perform a System Recovery
Technical Tip How to Perform a System Recovery Revision 2.08.2017 Technical Tip: How to Perform a System Recovery Page 1 Table of Contents 1.0 INTRODUCTION... 3 2.0 UNDERSTANDING THE DIGIOP CHASSIS GENERATIONS...