Installation Manual EEEC. Segment Design Tool Authorizations. Distribution. Manual. Emerson Export Engineering Centre

Transcription

1 Revision P3 08-Oct-14 Page 1 of 14 Installation Manual EEEC End Customer: End Customer Reference Number: Document File Name: Document Status: SDT5.4.0_Installation_Manual.docx Approved Authorizations Name Function Signature Developed By: Gaurav Jirapure GJ Reviewed By: Nitin Patankar NP Released By: Distribution Name Company Name Company

2 Revision P3 08-Oct-14 Page 2 of 14 Emerson Process Management All rights reserved. Unauthorized duplication, in whole or in part, is prohibited. Trademarks identified in this document are owned by one of the Emerson Process Management group of companies. Unless otherwise agreed to in writing by the parties, any information provided in this document is confidential or proprietary and may not be used or disclosed without the expressed written permission of Emerson Process Management. Emerson Process Management Process Systems and Solutions Emerson Tower, Matrix Complex, Near College of Engineering Pune, Shivajinagar, Pune, India T +91 (20) F +91 (20) Emerson Process Management Internal and Proprietary

3 Revision P3 08-Oct-14 Page 3 of 14 Revision History Rev Status Description Date Developed By Reviewed By 1 P1 Preliminary document 02-Jun-14 Gaurav Jirapure 2 P2 Modified Library Setup version 15-sep-14 Gaurav Jirapure 3 P3 Modified Library Setup version 08-Oct-14 Bibek Mohanty

4 Revision P3 08-Oct-14 Page 4 of 14 Contents 1 Introduction Purpose Scope Terminology Prerequisites Hardware prerequisites Software prerequisites Installation / Configuration steps for prerequisites Installation Procedure Contents of installation package Installation package execution steps Uninstall procedure Instructions / steps... 14

5 Revision P3 08-Oct-14 Page 5 of 14 1 INTRODUCTION 1.1 Purpose 1.2 Scope With this new release of the SDT 5.4.0, the SDT Component Library is decoupled from the main SDT application. Hence there are two different setup files available for the complete SDT installation. One installation file for the main SDT application and second installation file for the SDT Component Library. This de-coupling of the setups is for ease of release management of Library Components without impacting the main SDT application. This document will guide through the installation process of both the setups. This manual contains information concerning the installation, un-installation of the two setups i.e. the main setup of the and setup to install the library components of the. To ensure proper installation or uninstallation of the tool; the instructions given in this manual should be thoroughly understood and followed. 1.3 Terminology SDT SDT Library or SDT Component Library - Component Library

6 Revision P3 08-Oct-14 Page 6 of 14 2 PREREQUISITES 2.1 Hardware prerequisites Component Computer / processor Memory (RAM) Operating System Requirement Intel Pentium 4 (or equivalent ) and above 2 GB RAM and above Windows XP or Windows7 (32-bit & 64-bit Machine) 2.2 Software Prerequisites Important: In case of Windows XP operating system it is mandatory to have.net Framework version 2.0 installed on the computer. How to check that the.net Framework version 2.0 is installed on the Windows XP operating system computer? Please refer process below: 1) Click on Start 2) Click on Control Panel 3) Double Click on Add and Remove Programs 4) Check for the entry highlighted in the below bitmap. Figure 1 -.NET Framework version 2.

7 Revision P3 08-Oct-14 Page 7 of 14 In case if the user proceeds with the SDT setup installation without.net Framework version 2.0 installed on the computer then the installation process will prompt the below message and will stop the installation. Figure 2 -.NET Framework version Installation / Configuration steps for prerequisites If there is any older version of the is present on the computer then before installing the new version of the tool first uninstall the older version of. To do this, follow the instructions mentioned in the "Uninstalling Procedure section below in this document. Important: It is very important to un-install the older version of the SDT (if present) before installing the new version of the SDT. How to check that the earlier version of SDT is installed on computer? Please refer process below: 1) Click on Start 2) Click on Control Panel 3) Double Click on Add or Remove Programs 4) Check for the entry highlighted in the below bitmap. Figure 3 Installed on machine.

8 Revision P3 08-Oct-14 Page 8 of 14 In case if the user proceeds with the new version installation of the tool without uninstalling the older version of the SDT then the installation process will prompt the below warning message and will stop the installation process. Figure 4 - Remove prior version of SDT from computer, if present.

9 Revision P3 08-Oct-14 Page 9 of 14 3 INSTALLATION PROCEDURE 3.1 Contents of installation package To download the installation package, visit the below web site. Installation package link is provided on the right top corner of the web page. The installation package consists of two setup files. Main setup Component Library setup file Download both the setup (msi) files.

10 Revision P3 08-Oct-14 Page 10 of Installation package execution steps It is mandatory to install the Main setup before the segment design tool component library setup. Below warning message will be pop-up in case if the Component Library is getting installed prior to the SDT main setup installation. Figure 5 Warning during installation of SDT Component Library prior to the installation of main SDT Setup. Installation steps for Main segment Design Tool setup Step1 Double Click setup file from V5.4.0 Step2 Click on Next to Proceed with the installation. l Figure 6 Welcome Screen of SDT

11 Revision P3 08-Oct-14 Page 11 of 14 Step 3 Read and Accept Software License Agreement and Click Next. Figure 7 Software License Agreement Screen. Step 4 Select Installation Folder and Click Next Figure 8 Installation Folder Screen.

12 Revision P3 08-Oct-14 Page 12 of 14 Step 5 Click on Install button to proceed with the installation process. Figure 9 Ready to installation Screen. Step 6 Please Wait, while installing the Figure 10 Installation progress is in process screen.

13 Revision P3 08-Oct-14 Page 13 of 14 Step 7 Click Finish to complete the Installation process. Figure 11 Click on Finish to complete Installation. Step 8 After successful installation of main setup, it is mandatory to install Component Library as well. o To install the same; double Click on the SDTComponentLibrary1.0.2.msi file and wait till the installation process of Component Library completes. Figure 12 Installation of SDT Component Library screen.

14 Revision P3 08-Oct-14 Page 14 of 14 4 UNINSTALL PROCEDURE 4.1 Instructions / steps The easiest way to uninstall is using Programs and Features option from the windows control panel. Click the Start button For windows 7 o Select Control Panel -> Programs -> Programs and Features. For Windows XP o Select Control Panel -> Add or Remove Programs. Click View installed updates. Click and then click Uninstall. Uninstallation of will also remove Segment Design Tool Component Library from the computer (if exist).