NetBrain Consultant Edition (CE)

Transcription

1 NetBrain Consultant Edition (CE) Quick Start Guide NetBrain Technologies, Inc All rights reserved

2 Contents 1. Introduction 1) Install NetBrain Workstation Consultant Edition 2) Start Workspace Wizard 3) Tune Discovery Results 4) NetBrain User Interfaces 5) Common Workflow 2. Dynamic Documentation 1) Map around a device 2) View and Annotate Design Details 3) Create Visio Map Instantly 4) Find relevant maps instantly 5) Map L2 Connection for an IP 6) Map L2 Connections of a LAN segment 7) Define and Map a Dynamic Device Group 8) Auto Update Maps 9) One Click Word Document From the Map 10) Create an Asset Report 3. Visual Network Analysis 1) Visualize L3 Design 2) Visualize L2 Design 3) Configuration Analysis 4) Routing Analysis 5) Batch Compare Configurations and Routings 6) Login to a network device 2

3 1.1 Setup NetBrain Workstation 1.1 Install NetBrain Workstation Consultant Edition a) Download the software to your computer a) Run the setup file and follow the setup wizard Download the NetBrain software here. Unzip the file. For Windows 7/2008, we recommend that you right click on the setup file and select the Run as Administrator option.. c) Activate your license Launch NetBrain Workstation Consultant Edition. The Welcome to NetBrain window opens. For trial license (POC user): Click on the Activate Trial License button. Fill in your and Password in the Register for Trial License window. (The Password has been sent to you in the Proof of Concept ) For permanent license (Customer): Click on the Activate Permanent License button. Fill in your License ID, password, name, and address in the Activate License window and then click on the Activate Online button. (The license ID and password have been sent to you in the order delivery ) Note: If your license server is NOT connected to the Internet, please and we will send you instructions on how to activate the license offline. 3

4 1.2 Start Workspace Wizard Wizard Step 1: Define Telnet/SSH/SNMP credentials and proxy When you start NetBrain Workstation for the first time, the Workspace Wizard automatically starts up. For the first step, 1. Click the Telnet/SSH login tag. 2. Click the Add button. 3. Enter the corresponding values. 4. Repeat step 2 and 3 to add all possible Telnet/SSH login credentials. 5. Click the other tabs in this window to add Privilege Password, SNMP community, Network Server and Jumpbox. 6. Click the Next button to go to the next step of wizard. Note: If Workstation can access your network directly, then you do NOT need set a Jumpbox. Otherwise you do need set a Jumpbox so that the Workstation can access the live network. 4

5 1.2 Start Workspace Wizard Wizard Step 2: Discover your network from a seed router 1. Click the Telnet and SNMP field and select how system accesses your live network from the drop down menu. If you are not sure, select Telnet/SSH and SNMP safely. 2. Enter the IP address of a seed router. 3. Click the Start Discovery button. 4. Select an entry to view the log. 5. View the discovery statistics and summary here. Note: This discovery process includes two steps: discover the network devices and retrieves the live data from your live network; build L3/L2 topology. Depending on your live network, the time for each step varies, from a few minutes to 20 minutes. 6. Click the Finish button to exit the Wizard. Note: The discovery statistics are updated and displayed at. If you fail to discover some devices in your network, first make sure that you enter all possible live network settings at step 1 Define Telnet/SSH/SNMP Credentials and Proxies and then you can try different seed routers. 5

6 1.3 Tune Discovery Results a) Rediscover unknown IP 1. Go to the Workspace menu tab, click on the Manager icon. 2. Select Unknown IP at the left pane and then Username/Password Mismatch. At the right pane, the system lists all IP addresses discovered as the neighbor IP address in the discovery process but was not accessible due to the fact that none of the defined username/password pairs worked. 3. Click the Rediscover button at the top right. Add the username/password pairs at the Live Network Settings window. 4. Close the Live Network Settings window and click the Start Discovery button in the Live Network Discovery window. Note: Using a similar approach, you can also resolve unknown IPs due to Privilege Password Mismatch or others. b) Rediscover devices that were discovered only by SNMP 1. Go to the Workspace menu tab, click on the Manager icon. 2. Select Discovered by SNMP at the left pane. At the right pane the system lists all devices discovered by SNMP but not accessible by Telnet/SSH. 3. Right click a device and select Live Access Log menu to view why the system could not telnet/ssh to the device. If the Telnet/SSH login credentials were missing, click Workspace menu tag from the menu bar and then the Settings icon for Live Network Settings to add the credentials. 4. Select one or multiple devices (press the Shift or Ctrl key to select multiple devices) and from the right click menu select Discover Selected Devices. 6

7 1.4 NetBrain User Interface 1 Ribbon menu: e.g., enter any IP, hostname or string to search the workspace data and maps. 2 Search results pane: e.g., create a dynamic Q-map or open Visio maps. 3 Map area: e.g., extend neighbors to draw more devices. 4 Map floating menu: launch operations to analyze or troubleshoot a network here. 5 Operation pane: e.g., drag and drop an entry to a map and manage your maps in Map Center. 7

8 1.5 Common Workflow All-in-one Search Mapping Analyze From Map Search NetBrain workspace, database and Visio maps on your PC using: IP address or device hostname Text inside maps Configuration keywords Model, serial number, MAC, etc. From the search results, Create a dynamic Q-map (L3 and L2) instantly View the relevant Visio diagrams Directly from the map, Visualize the network design Monitor Analyze configurations and routing Compare the historical data 1. Search Enter a keyword such as IP address, configuration keyword or model in the Search box and press the Enter key. Tip: check the Exact Match Only option or put double quotes around the keyword for exact matching. 2. Map the searched results 3. Analyze from the map Mouse over a search result such as an end system. Select L2 Page and click on the map to create a dynamic Q-map. Click on the blank space, a device or a path on the map and select the various operations from the map floating menu.

9 2.1 Map around a Device Map L3 connections around a device Troubleshoot a problematic router BGP neighbors are down 1. Search the device Enter the IP address or device name in the Search field and press the Enter key. Tip: check the Exact Match Only option or put the double quotation around the key word for the exact matching. 2. Map the searched result Mouse over a device in the searched result. Click the View Larger Map link. 3. View the neighbors Click on the red plus sign to open the neighbor window. 4. Draw the neighbors Double click on all neighbors or one specific neighbor to draw the neighbor(s) in the map. 5. Draw the neighbor(s) of the neighbor(s) Repeat steps 3 and 4 for more neighbors till all neighbor devices you are interested in are drawn in the map. 9

10 2.2 View and Annotate Design Details Zoom in the map to view details Browse and annotate the design Create a design map for routing, multicasting, etc 1. Zoom in the map Scroll the wheel of mouse forward. 2. View the configurations of a network object Mouse over a network object such as routing protocol, interface, or ACL. 3. Annotate a network design Click on the Display in the Map button. 10

11 2.3 Create Visio Map Instantly Export NetBrain Q-map to Visio format Share a map with someone without access to a NetBrain Workstation Generate static Visio maps for inventory or compliance reasons 1. Create a Visio map Click on the Export to Visio button in the map floating menu. Note: There is a limitation on the trial license for this feature. You can only export a map with 50 or fewer devices to Visio. 11

12 2.4 Find Relevant Maps Instantly Manage thousands of maps in the map center Find the Visio or dynamic maps by keywords instantly Quickly pull out the Visio maps when you need 1. Search the maps via any text in the map, device name or IP address 2. Open the maps inside NetBrain 3. Find the relevant maps for a dynamic Q-map Enter the text, hostname or IP address in the Search field. Check the Map option. Click the Search button. Double click a map (Visio or dynamic) to open it inside NetBrain. Click the search button in the map floating menu. Note: when NetBrain Workstation starts, it automatically scan and index your local disk for Visio and Q-maps. 12

13 2.5 Map L2 Connection for an IP Find the switch port connected to an IP address and map out the connection Block the traffic from a virus affected server 1. Search the IP address Enter the IP address in the Search field and press the Enter key. 2. Create the L2 map from the searched results 3. Draw other switch neighbors Move over a device in the searched results pane. Click on L2 Page 1. Click the View Full Map link. Click on the red plus sign of the switch to extend its neighbors. 13

14 2.6 Map L2 Connections of a LAN Segment Map the L2 connections for a site Document a data center 1. Search the LAN segment 2. Create L2 map from the searched results 3. Highlight the LAN segment Enter the LAN segment subnet address (e.g., /24 ) in the search field and press the Enter key. In the searched result pane, mouse over a network segment. Click on L2 Page 1. Click the View Larger Map link. Click the blank space of the map and select Highlight >> Highlight LAN Segment from the map floating menu. 14

15 2.7 Define and Map a Dynamic Device Group Define device groups dynamically so that their devices and maps can be automatically updated Share and auto update the maps for network sites 1. Create a new device group 2. Select devices dynamically 3. Define the search criteria In the Workspace pane, right click on the Local node under Device Group and select the New Device Group option. Click on the Dynamic button in the Device Group Properties window. Define search criteria according to the device type, hostname, IP address, etc. 4. Search the devices Click on the Search button. 5. Map the device group Right click on the device group and select the Topology Map option. 15

16 2.8 Auto Update Maps Validate a map against the current network state Auto update NetBrain maps and Visio maps Automatically create and update maps for data centers 1. Validate the map against the current baseline Open an old map. Click on the Map > Validate > Highlight Changes in the menu. 2. Regenerate the map Click on the Regenerate Map button to update the map. 3. Schedule Map Update Click on the Schedule button to setup a schedule to update the maps 16

17 2.9 One-Click Word Document From the Map Create a Word document instantly from a map Create inventory, design, or troubleshooting documents 1. Open the Network Documentation window Click on the Word button in the map floating menu. 2. Select the data to export Select a template and click on the Advanced button to select which data to export. 3. Select a target file Select a target file 4. Create the Word Document Click on the Finish button Note: There is a limitation on the trial license for this feature. You can only create a Word Document for a map with 50 or fewer devices. 17

18 2.10 Create an Asset Report Create a Asset report for some devices instantly Create inventory report. 1. Open the Asset Report opens lick the Asset Report button within the Export group 2. Select the data to export Select the devices by selecting a site, a device group or a device type/subtype. 3. Customize the asset report Click the Create Asset Report button, Choose options to customize the asset report. 4. Create the Asset Report Click on the Start button 18

19 3.1 Visualize L3 Design Visualize the network design such as routing, MPLS VRF, and multicasting Analyze the configurations of a network design Visualize the routing design for a core network Determine if a network is QoS/VoIP ready 1. Highlight routing protocols Select Highlight > Routing Protocols from the map floating menu. 2. Open Design Reader pane From the menu under the Home tag click the Design Reader option. 3. View the configurations of two devices such as BGP neighbors 4. Select a design filter such as All BGP Configuration Select two devices in the map and their configurations will be displayed at the bottom. Select a design filter in the lower left pane. 19

20 3.2 Visualize L2 Design Highlight the VLAN, the STP blocked ports, or voice VLAN View L2 port configuration Understand the L2 design 1. Highlight LAN segment Click on the Highlight > Highlight LAN Segment option from the map floating menu 2. View the port configuration 3. Annotate the configuration in the map Mouse over the port and the configuration will be displayed in the tip window Click on the Display in Current Map button 20

21 3.3 Configuration Analysis View the current and historical configurations Compare the current and historical configurations Identify configuration changes before and after implementing a network design Identify recent configuration changes during troubleshooting 1. View the configurations Select a device in the map and click on the Config > Config option in the map floating menu. 2. Select a source such as the current baseline or a historical benchmarked data By default the configurations used to draw the map (usually the current baseline) will be displayed. Select another source here. 3. Search the configurations Click on the Search button. 4. Compare two configurations Click on the Compare button and select two sources. 21

22 3.4 Routing Analysis View the route table and find the route to a destination quickly. Find out how a route is propagated Discover a flapping route Find out how a route is propagated 1. View the route table Select a device and click on Route Table >> Route Table in context menu. 2. Sort the route entries Click on a parameter to sort route entries by this parameter. E.g., sort the routes by Age in ascending order to find the flapping route. 3.. Find the route for a destination Enter the destination IP address or subnet into the Filter field of the Route Table pane, then press the Enter key. 4. Map the route in the map Create a new map and drag and drop a route entry to the Q-map. 5. Find how route is propagated Click Go To Next Hop button to discover how this subnet is routed in the next hop device. Continue this process till the destination is reached. 22

23 3.5 Batch Compare Configurations and Routings Compare configurations and routings for all devices in the map Find out any missing routes after implementing a network change Find out when a routing loop was introduced 1. Compare configurations and routings for all devices in the map From the map floating menu, click on Compare > Compare Config & Routing. 2. Select two data sources Select two DataFolders and click on the Compare button. 3. View the routing change statistics and the routing changes Double click an entry in the Batch Compare Routing Tables pane to view the route changes for a router. 4. View the configuration changes Double click an entry in the Batch Compare Config pane to check the configuration change details for a device. Note: You can select the local DataFolder as well as the server DataFolder, which begins with ::. The server DataFolder is automatically created by the benchmark tasks on the server. 23

24 3.6 Login to a Network Device Work on the old CLI window and the map side by side. Disable a switch port connected to the a virus affected server View the output of BGP routing table of a router and its topology map side by side 1. Search the device Enter the device hostname at the search field and press the Enter key 2. Create the Q-map around this device Mouse over a device in the searched results and click View Larger Map link. 3. Login to the device Select a device in the map and click CLI >> Telnet/SSH from the map floating menu. 24