Installation Guide. (Version ) Midland Valley Exploration Ltd 2 West Regent Street Glasgow G2 1RW United Kingdom

Transcription

1 Installation Guide (Version ) Midland Valley Exploration Ltd 2 West Regent Street Glasgow G2 1RW United Kingdom Tel: +44 (0) Fax: +44 (0)

2 Table of Contents 1. Move2014 Software and Supporting Documentation... 3 Contents: System Requirements... 4 Operating Systems... 4 Graphics Card... 4 Hardware... 5 Workstation/Desktop... 5 Laptop/Notebook... 5 Screen/Monitor Installing Move... 6 Installing on Windows... 6 License Agreement... 6 Installation Folder... 6 License Manager Components... 7 Uninstalling Move on Windows... 7 Uninstalling Licensing Service on Windows... 7 Using Windows Remote Desktop... 8 Installing on Linux... 9 Extracting the software... 9 Running the setup scripts... 9 License Agreement License Manager Components Uninstalling Move on Linux Uninstalling Licensing Service on Linux Configuring OpenGL on Linux Installing on MacOS X License Manager Component Uninstalling Move on MacOS X Move licensing Move Link for Petrel v System Requirements Software Operating System Installation Move Link for OpenWorks R

3 Introduction Software Operating System Installation (client) Contacting Midland Valley... 17

4 1. Move2014 Software and Supporting Documentation Contents: Move installer MoveViewer installer FieldMove installer Midland Valley Licence Manager (FLEXnet 11.11) software Move Link for Petrel installer Move2014 Software Installers Move /Windows64 Move /Linux64 Move /Mac64 Installers for Windows (64-bit) Archive for Linux (64-bit) Installers for Mac (64-bit) FieldMove2014 Software Installers Move /Windows64 Move /Mac64 Installers for Windows (64-bit) Installers for Mac (64-bit) MoveViewer 2014 Software Installers Move /Windows64 Move /Linux64 Move /Mac64 Installers for Windows (64-bit) Archive for Linux (64-bit) Installers for Mac (64-bit) License Manager Software LicenseManager/FLEXnet11.11/Windows64 LicenseManager/FLEXnet11.11/Linux64 Licence Manager for Windows (64-bit) Licence Manager for Linux (64-bit) LicenseManager/FLEXnet11.11/Mac64 Licence Manager for Mac (64-bit) LicenseManager/FLEXnet11.11/docs License Manager Documentation Move documentation The following documents are provided with Move2014 and also can be found in the Client section of our website ( Move2014 Release Notes Move2014 Installation Guide Move2014 Licensing Guide Move2014 Tutorials MoveViewer 2014 Installation Guide FieldMove2014 Installation Guide 3

5 2. System Requirements Operating Systems Please check to ensure you have at least the minimum specification before installing: Windows: 64-bit versions of Windows Vista, Windows 7 or Windows 8 Windows requires.net Framework 4.0 or higher. Recommend Windows 7 64-bit, SP1, Enterprise or Ultimate editions. Linux: Linux Red Hat Enterprise 5 and 6 (64-bit only). Move may run on other distributions of Linux however, these have not been tested. For optimal video performance with OpenGL when using an NVIDIA video card under Linux, it is recommended that you use the accelerated drivers provided by NVIDIA on their website Mac: OS X 10.7 and up (64-bit only). Using Move in a virtual machine (with Mac OSX as guest) is not supported. Graphics Card Move is a graphics intensive application and takes advantage of modern hardware GPUs in order to speed up 3D rendering. In some algorithmic operations Move also offloads parallel operations to the GPU to deliver faster computational results. The more memory on the graphics card the better Move will handle larger DEM and Image/Seismic data. Graphics Card requirements (Notebook or Workstation): 1GB of RAM Graphics card drivers fully up to date Run pixel shader 2 or later Be OpenGL compatible Workstation Graphics Card Recommended: NVIDIA with 2GB RAM Workstation Graphics Card Preferred: NVIDIA with > 2GB RAM - Quadro 6000, K5000, 4000, 2000 Notebook Graphics Card Recommended: NVIDIA with 1GB RAM Notebook Graphics Card Preferred: NVIDIA with > 2GB RAM - Quadro M series, NVIDIA Geforce GTX/GT M series 4

6 Move will take advantage of standard GPU processing on the graphics card for 3D rendering. The Move Sediment Modelling module will optionally run a CUDA GPU version for maximum speed depending on the hardware available. See the Sediment Modelling section in the Release Notes for further information. Hardware The following list of is provided as a general guide only. If your system configuration is different and you are unsure of its capability then please us: support@mve.com with your system details for further information. The hardware requirements greatly depend on the size of data sets you are using. If you are working with large data sets and utilising Move applications simultaneously then we would strongly suggest the following recommendations. Workstation/Desktop For example, Dell Precision T7610/T5610/T3610;Apple imac, Apple Mac Pro. Specification Recommended Minimum Recommended Ideal CPU Single 2.0 GHz Dual core CPU One or Two 2.5+ GHz or faster CPUs Each CPU Dual/Quad/Six-core Memory 4 GB 8-32GB+ Laptop/Notebook For example Dell Precision M , M , M ; Apple Macbook Pro 15. Specification Recommended Minimum Recommended Ideal CPU 1.8 GHz Dual-core CPU 1.8 GHz+ Dual/Quad/Six core CPU Memory 4 GB 4-16 GB Screen/Monitor Minimum screen resolution is a single monitor/screen with 1280x1024 pixels. Move is a graphics intensive application supporting multiple simultaneous views of your data model, and we recommend as much screen space as you can afford in order to maximise your experience and attention to detail. Move will support dual monitors which are recommended at 24 in size and above. Move supports the Macbook Pro Retina display, which is recommended. 5

7 3. Installing Move Windows, Linux and Mac have different installation instructions. Please refer to the appropriate section below. Installing on Windows We recommend that you should be a power/administrator user on Windows to install or with UAC elevated to administrator to install on Windows Vista and Windows 7. To begin the installation process you must browse to the installer file, for example: USB-Drive:\Move2014.2\Windows64\move_2014_1_windows_64-bit.exe License Agreement To continue with installation please accept the terms of the agreement and click Next. Installation Folder Select the folder in which you wish to install Move. You may select your own location by clicking Choose or by typing the explicit location in the input box. You may accept the default location if Move if installed is: C:\Program Files\Midland Valley\Move otherwise it is: C:\Program Files\Midland Valley\Move

8 License Manager Components The Move installer will install a FLEXnet License Manager Windows Service as part of the post-install process. This service MUST be installed. If you wish to run Move from a network drive location, or copy/script a custom Move set-up, then please contact Midland Valley for further instructions. Upon successful installation you should see something like this in the Windows Services via the Administration Tool: Uninstalling Move on Windows Please use the Control Panel to uninstall Move. Uninstalling Licensing Service on Windows Upon successful installation you should see something like this in the Windows Services via the Administration Tool. You can remove the Windows Service using the above tool. Alternatively you can remove the FLEXnet service via a Command Console: C:\ sc delete "FLEXnet Licensing Service 64" C:\ sc delete "FLEXnet Licensing Service" 7

9 Using Windows Remote Desktop When connecting to a remote system using Microsoft s Remote Desktop Services you may experience issues when using larger models. This is due to limitations with the software OpenGL driver that is used when using the remote connection. There are several ways to work around such issues: Use another remote display application that uses the hardware capabilities of the host machine. Start Move on the host machine BEFORE connecting to it. This requires physical access to the host system. Use the alternate software OpenGL drivers provided with Move. These are located in the bin/mesa3d folder inside the location where Move was installed. When Move senses that it is running remotely then it will prompt the user that the software drivers are being copied into the bin folder and being utilised. 8

10 Installing on Linux We recommend you should have root permission or be the root user on Linux to install. Installing Move on Linux is a straight forward process of extracting the software from the archive and running a script which will prompt for required input at the appropriate time. The software can be installed anywhere, the following instructions assume it will be installed in /opt/mve. Extracting the software Move is bundled in compressed tar archive. To extract the software, follow these steps: 1. Go to destination directory: prompt# mkdir -p /opt/mve ; cd /opt/mve 2. Copy tgz file: prompt# cp USB_Drive/Move2014.2/Linux64/ move_2014.2_linux_64- bit.tgz. 3. Extract archive prompt# tar zxf move_2014.2_linux_64-bit.tgz This will create a Move folder containing the software. Running the setup scripts You now need to run the setup script which will complete the installation process. 1. Go to license_bin_utils directory: prompt# cd /opt/mve/move2014.2/license 2. Run FLEXnet License Service set-up script prompt#./install_fnp.sh 3. Go to bin directory: prompt# cd /opt/mve/move2014.2/bin 4. Run Move set-up script prompt#./setup.sh Do you wish to install Move in '/opt/mve/move2014.2/bin' [Y/n]? Do accept the terms of the license agreement [Y/n/v]? Do you wish to install the Move tutorials [Y/n]? Do you wish to clean up the intermediate files [Y/n]? 5. As shown above, you will be prompted for various information. The default answer is shown in upper case; hit the Return key to accept it. Otherwise, type y or n and hit the Return key to accept it. Confirm location Intermediary files (archives containing examples) can be removed to free up disk space. It may however be useful to keep them as end users may wish to install local copies elsewhere. 9

11 6. Once the setup script completes, it will display the installation log (saved in /opt/mve/move2014.2/install.log). Any errors will be saved in that file. 7. To start Move, please use the move script generated during the installation (do not run the Move application directly). prompt# /opt/mve/move2014.2/bin/move License Agreement To continue with installation accept the terms of the license agreement and click Next. License Manager Components The process outlined above will install a FLEXnet License Manager Service as part of the pre-install process using the setup_fnp.sh script. This service MUST be installed. If you wish to run Move from a network location, or script a custom Move set-up, then please contact Midland Valley for further instructions. Uninstalling Move on Linux Remove the entire installation directory using the following command: prompt# /bin/rm -rf /opt/mve/move Uninstalling Licensing Service on Linux Remove the entire installation directory using the following command depending on 32- bit or 64-bit: prompt# /bin/rm rf /usr/local/share/fnp/service64/ OR prompt# /bin/rm rf /usr/local/share/fnp/service/ Configuring OpenGL on Linux On systems using nvidia Quadro 4* series cards, the drive may need to be configured to disable VBlank and flipping. As illustrated below, open nvidia-settings application and make sure both check boxes are NOT ticked. 10

12 Installing on MacOS X MacOS distribution comes in three separate DMG archives. To install any one: Double click on the dmg file in Finder, Accept the terms of the licensing agreement, Drag and Drop the application in the new window to the /Applications folder. License Manager Component Move will require license configuration after first launch. See details in the Move Licensing Guide. If set it up is required manually, the install_fnp.sh script can be found in the DMG inside the Utilities/license folder. Uninstalling Move on MacOS X Drag and drop the Move application from the /Applications folder into the Trash. 11

13 4. Move licensing Please refer to the Move Licensing Guide which can be found on the release USB package and in the Client section of 12

14 5. Move Link for Petrel v The Move Link for Petrel provides a means for Petrel* users to share and transfer data with Midland Valley's Move product. *Mark of Schlumberger Once installed, the Link allows the Petrel user to specify objects within the input tree to send across to the Move application of the Move Suite. Once in Move, it is then possible to perform model building, editing and analysis or utilise functionality within the modelling modules to perform restoration, validation, balancing, geomechanical modelling, fracture modelling and sediment modelling on the transferred objects (if licenses for these modules have been purchased and are available). System Requirements Software To use the Move Link for Petrel (version ), users are required to have a valid licence of: Midland Valley s Move application Schlumberger s Petrel seismic to simulation software version 2013.x or 2012.x Move Link for Petrel version from Midland Valley. For clarification on compatibility please support@mve.com. Operating System Petrel is a Windows only product and therefore the Move Link for Petrel will only be available where all products are running on Windows. See the Move system requirements and the Petrel software system requirements for details. Installation As of Petrel 2011, Move Link for Petrel is installed via the Ocean Plugin manager. To install for Petrel 2013: Select Ocean Plugin Manager from the help menu. Select Install plugin. Browse to MoveLink.pip from the installation disk. Close down Petrel. When Petrel is restarted, the Move Link will be visible in the Processes pane. It is recommended that the plugin is installed using administrator privileges. 13

15 Move Version Petrel Version Move Link for Petrel Version (via pip or msi) (64-bit) 2013.x (64-bit) Move_2014.2_link_for_Petrel_2013_64-bit (64-bit) 2012.x (64-bit) Move_2014.2_link_for_Petrel_2012_64-bit 14

16 6. Move Link for OpenWorks R5000 Introduction The Move Link for OpenWorks R5000 provides a means for Landmark OpenWorks users to share and transfer data with Midland Valley's Move Application of the Move Suite. The Link allows the Move user to directly import objects within an OpenWorks R5000 database via the input tree to send them across to Move. Once in Move, it is then possible to perform model building, editing and analysis or utilise functionality within the modelling modules to perform restoration, validation, balancing, geomechanical modelling, fracture modelling and sediment modelling on the transferred objects (if licenses for these modules have been purchased and are available). Software To use the Move Link for OpenWorks R5000, users are required to have a licence of: Move Link for OpenWorks R5000 software from Midland Valley. Move software from version Move from Midland Valley. Linux - Landmark OpenWorks software from version back. Windows - Landmark OpenWorks software from version back. Oracle software version 11g onwards. For clarification on compatibility please support@mve.com. Operating System Please check to ensure you have at least the minimum specification before installing: Windows: Linux: Microsoft Windows Vista, Windows 7 (64-bit). Linux Red Hat Enterprise 5 and 6 (64-bit). Installation (client) The Link will work whether running Move from the same machine as OpenWorks is installed on or alternatively from a client machine on the network that can see the OpenWorks and Oracle installations. Linux Move clients should ensure that Oracle and OpenWorks installations are on your PATH and LD_LIBRARY_PATH and visible on the network. Optionally on Linux you can install a local client of Oracle software. Windows clients MUST install Oracle client and OpenWorks client software before you run Move. See the installation guides from these products for more information. Midland 15

17 Valley do not supply Oracle or Landmark OpenWorks clients; these can be obtained as part of your own OpenWorks installation - contact your own local OpenWorks administrator. Some environment variables that need to be set or will help set-up include: OWHOME, OW_ORACLE_USER OW_HOME_DIR 16

18 7. Contacting Midland Valley Support Licensing & Technical Geological Additional Licences address Contact Details Midland Valley Exploration Ltd +44 (0) West Regent Street +44 (0) Glasgow G2 1RW UNITED KINGDOM info@mve.com Copyright 2014 Midland Valley Move, 2DMove, 3DMove, FieldMove and MoveViewer are either registered trademarks or trademarks of Midland Valley Exploration Ltd. Petrel, *Mark of Schlumberger 17