LaserMatrix. Series 2400 Laser Printers Replacement Parts Catalog

Transcription

1 LaserMatrix Series 2400 Laser Printers Replacement Parts Catalog

2 COPYRIGHT 996, OUTPUT TECHNOLOGY CORPORATION All rights reserved. This document may not, in whole or in part, be copied, photocopied, reproduced, translated, reduced to any electronic medium or machine readable form without prior consent, in writing, from Output Technology Corporation. Output Technology Corporation 230 North Fancher Road Spokane, WA (509) We suggest you use genuine Output Technology parts and authorized service centers: Contact us at Voice: (509) Fax: (509) Output Technology maintains a Bulletin Board System (BBS) service. In the U.S.A., call (509) to access our BBS service for the very latest drivers, firmware, pricing, maintenance and troubleshooting aids, and application information. Also you can contact us at FTP: WWW: ftp.output.com/public/output CTS N Part No: Rev. C February 9, 998

3 GENERAL This catalog contains itemized lists of all servicing aids, supplies, expendables, and field replaceable parts for all models of the printer. Ordering information is provided for field replaceable units (FRUs). FRUs are illustrated at the end of this publication. Parts are listed in the following tables Customer Replaceable Units (CRUs) and Miscellaneous, Page 2 Field Service Tools, Page 3 Field Replaceable Units (FRUs), Page 4 FRU illustrated parts breakdown drawings Main and Lid Access, Pages 7, 8, and 9 Paper Path, Pages 0 and Fuser, Pages 2, 3, and 4 Right Side and Frame, Pages 5 and 6 Left Frame Assembly, Page 7 Engine Controller, Page 8 Raster Image Processor, Page 9 Low Voltage Power Supply, Page 20 ORDERING INFORMATION To order a field replaceable unit (FRU), proceed as follows:. Find the appropriate item number from the illustrations at the end of this publication. 2. From the FRU table on Page 4, match the item number to the FRU part number. 3. Obtain the serial number of your printer (on the right side of the printer). 4. If applicable, have your Visa or MasterCard number and expiration date ready, and then contact Output Technology Corporation by phone, fax, mail as instructed on the inside cover of this publication. Series /9/98

4 To order customer replaceable units (CRUs) or other miscellaneous items, select from the following table and then continue as directed in Step 4 above. CUSTOMER REPLACEABLE UNITS (CRUs) AND MISCELLANEOUS Order Number Customer Replaceable Units (CRUs) Description LM2400C0 LM2400C02 LM2400C03 LM2400C04 LM2400C06 LM2400C07 LM2400C XX Developer Kit, containing () Startup Toner Bottle () Toner Bottle Sprout () Developer Unit () Ozone Filter () Cleaning Kit ( XX) Drum Kit, containing () Drum Cartridge Toner Kit, containing (2) Toner Bottles () Toner Bottle Spout (2) Waste Toner Bottle (2) Felt Cleaning Pads Fuser Kit, 5 VAC Felt Cleaning Pad Kit (package of 0 felt pad assemblies) Fuser Kit, 230 VAC Fuser Kit, Label/Tag, 5 VAC,2 Starter Kit Consists of one fully assembled fuser heater and pressure assembly, including rollers, heat lamp, thermistor, thermal breaker, heat shield, felt pad, and felt pad cover. Same as LM2400C04 but with the thermistor mounted on the right end of the assembly rather than in the middle. In general, consider using LM2400C08 with printers dedicated to printing narrow labels and tags. Contains LM2400C0, LM2400C02, and LM2400C /9/98 Series 2400

5 Order Number Description CRUs (Continued) XX Cleaning Kit, containing (5) Wipes (5) Large-tipped swabs () Brush for cleaning corona wires Publications XX XX XX XX Manual, Installation Guide Manual, Operator's Guide Manual, Parts Catalog Manual, Maintenance 4 Shipping XX Ship Kit FIELD SERVICE TOOLS (Recommended) Screwdrivers - # Phillips - #2 Phillips Hex Allen wrench, 2.5 mm 0.74 mm feeler gauge Diagonal cutters Needle nose pliers Digital voltmeter Cable ties Toner vacuum cleaner 5 Varnish (for fixing small screws and adjustments) Cleaning kit ( XX). See "CRUs and Miscellaneous." 4 5 Includes Maintenance Manual LM000M05 and Parts Catalog XX. Such as 3M Model 497 (5 vac) with a standard toner filter. Series /9/98 3

6 FIELD REPLACEABLE UNITS (FRUs) Item Figure FRU Part No. Description XX Contact, Earth Ground 2 3a XX Guide, Paper, Top-Of-Form XX Housing, Ozone Filter, Plenum 4 a XX Cover, Tractor Sensor XX Lid Catch, Left XX Lid Catch, Right 7 6 & XX Latch, Developer, Retaining, Green XX Cover, Erase LED 9 a XX Cover, Right Inside 0 4a XX Heat Shield, Fuser, Lower a XX Cover, Lamp Connector 2 4b XX Cover, Fuser Felt Pad 3 4b XX Heat Shield, Fuser, Upper 4 b XX Cover, Bottom XX Cover, Hinge, Right XX Cover, Hinge, Left 7 3a XX Guide, Paper, Entrance 8 3a XX Guide, Paper, Exit 9 3a XX Roller, Pressure Exit 20 a XX Enclosure, Right Side 2 a XX Cover, Front (Front Door) 22 a XX Cable, Control Panel XX Cable, LSU XX Catch Release Assembly, LID XX Latch Pin Assembly, Top Cover, Right 26 3b XX Slide Arm Assembly XX Enclosure Release Button Assembly XX Erase LED Assembly 29 a XX Left Enclosure, With Mounting Bracket XX Laser Scan Unit XX Drive Assembly, Front-End 33 3a XX Guide, Paper, Main 34 3b XX Transfer Charger Assembly 35 3b XX Tractor Assembly Qty Per Printer /9/98 Series 2400

7 FIELD REPLACEABLE UNITS (FRUs) Item Figure FRU Part No. Description a 4a 2 4b 4b 4b 3b 3a a 4b 4b 4b 3a 3b 4a 4a XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX Frame Assembly, Right Frame Assembly, Left Fuser (Heater & Pressure) Assembly, 5 VAC 6 Fuser Base Top Cover Assembly, With Release Button Heat Roller Subassembly, Without Lamp Pressure Roller Subassembly Thermal Breaker Assembly Stepper Motor Assembly, Tractor Cover Assembly, Paper Exit Control Panel (Keypad) Assembly Fuser Heater Assembly, 5 VAC 7 Fuser Heater Assembly, 230 VAC Fuser Pressure Assembly Tension Roller Assembly High Voltage Power Supply Fuser (Heater & Pressure) Assembly, 230 VAC Fuser (Heat & Pres) Assy, Label/Tag, 5 VAC 8 Qty Per Printer 54 a XX Overlay, Keypad b c 5 3b XX XX XX XX XX XX XX XX XX PCB, Backplane PCB, Engine Controller (EC) 9 PCB, DIMM, RIP Firmware, LM2405 PCB, Raster Image Processor (RIP) 0 PCB, Toner Sensor PCB, Fuser Sensor PCB, Motor Controller PCB, Tractor Encoder PCB, DIMM, RIP Firmware, LM Order LM2400C04 (Page 2) which is a kit containing XX. (For printers dedicated to printing narrow labels and tags, consider using item XX.) For 5 vac printers dedicated to printing narrow labels and tags, consider using item XX. Order LM2400C08 (Page 2) which is a kit containing XX. Does not include firmware. See XX in this table. Also see XX. Series /9/98 5

8 FIELD REPLACEABLE UNITS (FRUs) Item Figure FRU Part No. Description Qty Per Printer XX EPROM, EC Firmware b b XX XX Kit, PCB,RIP Controller Low Voltage Power Supply, Modified XX XX XX Gear, Inner Transfer, Front-End Gear, Main Drive, Front-End Actuator, Drum Sensor 69 4c XX Clutch, Fuser c 4c XX XX XX XX Motor, Front-End Drive (With Gear) Fan, Ozone Fan, Fuser Cooling Motor, Fuser b XX Thermistor Assembly a 4b 4c 4b 4b XX XX XX XX XX XX XX Sensor, Paper Empty Halogen Heat Lamp, 5 VAC Sensor, Paper Jam Fuse, 25V, 5 A. (F3) 2 Thermal Breaker Halogen Heat Lamp, 230 VAC Fuse, 250V, 6.3 A., Time-Delay (F & F2) Contains RIP Controller PCB ( XX) plus standard-interface-connector (back) panel and optional-interface holder with cover plate. ¼ in. by ¼ in. F3 is used with a 5 vac halogen heat lamp 5 mm by 20 mm. F is the main fuse and F2 is used with a 230 vac halogen heat lamp. 6 2/9/98 Series 2400

9 Figure a. Main Upper Access PD-A Series /9/98 7

10 Figure b. Main Lower Access to LVPS & Backplane PD-B2 8 2/9/98 Series 2400

11 Figure 2. Lid Access PD-C Series /9/98 9

12 Figure 3a. Paper Path PD-D 0 2/9/98 Series 2400

13 Figure 3b. Paper Path PD-E Series /9/98

14 * See Figure 4c for disassembly of fuser base assembly. ** See Figure 4b for disassembly of fuser heater & pressure assemblies. Figure 4a. Fuser Assemblies PD-F 2 2/9/98 Series 2400

15 Figure 4b. Fuser Heater & Pressure Assembly PD-G Series /9/98 3

16 Figure 4c. Fuser Base Assembly PD-H 4 2/9/98 Series 2400

17 Figure 5. Right-Front Corner PD-I Series /9/98 5

18 Figure 6. Right Frame Assembly PD-J 6 2/9/98 Series 2400

19 Figure 7. Left Frame Assembly PD-K Series /9/98 7

20 * PCB does not contain firmware. Figure 8. Engine Controller PCB PD- M 8 2/9/98 Series 2400

21 * PCB does not contain firmware. ** See Figure 0 for firmware. Figure 9. RIP Controller PCB (Without Firmware) PD-N Figure 0. RIP Firmware (DIMM) PCB PD-O Series /9/98 9

22 Figure. Low Voltage Power Supply PD-L 20 2/9/98 Series 2400

23

24