imagerunner 3245/3235/3230/ Way Unit-A/2 Inner 2-Way Tray-D1 Cassette Feeding Unit-Y3 SERVICE MANUAL

Transcription

1 imagerunner 3245/3235/3230/ Way Unit-A/2 Inner 2-Way Tray-D1 Cassette Feeding Unit-Y3 SERVICE MANUAL DU JULY 2008

2 Contents Chapter 1 Introduction 1.1 System Construction System Configuration of Original Feeding Options System Configuration of Pickup/Delivery Options System Configuration of Print/Send Options Functions of Print/Send Options Product Specifications Names of Parts External View Cross-Section Using the Machine Turning On the Power Switch When Turning Off the Main Power Switch Control Panel User Mode Items Overview Common Settings Timer Settings Adjustment/Cleaning Report Settings System Settings Copy Settings Communications Settings* Mail Box Settings Address Book Settings* Maintenance by the User Routine Cleaning Inspection Safety Points to note at disassembly/assembly Safety of the Laser Light CDRH Regulations Handling the Laser Unit Safety of Toner Notes When Handling a Lithium Battery Product Specifications Methods/Functions Function List Printing Speed Paper Type Chapter 2 Installation

3 2.1 Making Pre-Checks Checking Installation Environment Points to Note Before Installation Combination Table of Accessories Checking the Contents Unpacking and Installation Unpacking and Removing Fixing Member Installing the Filter Installing Toner Container Installing Drum Unit Installing Other Parts Fixing the Host Machine Connecting the Cable Points to Note When Turning OFF the Main Power Stirring Toner Cassette Setting APVC Correction of Drum Auto Gradation Correction Screen Position Adjustment Checking the Connection to the Network Overview Ping Operation Procedure Checking Network with Remote Host Address When Not Using Network Connection Troubleshooting the Network Overview Check with Loopback Address Check with Local Host Address Checking the Images/Operations Checking the Image/Operation Installing the Card Reader Notice At Installation Checking the Contents Turning OFF the Power of the Host Machine Installation Procedure Installation Procedure in the imageware Accounting Manager (hereinafter referred to iwam) Environment Installing the Original Holder Notice At Installation Checking Components Installation Procedure Installing the Memory Checking the Contents Turning OFF the Power of the Host Machine Installation Procedure Installing the Memory (System upgrade memory) Checking the Contents Turning OFF the Power of the Host Machine Installation Procedure

4 2.10 Installing the Expansion Bus Kit Checking the contents Turning Off the Power of the Host Machine Installation Procedure Installing the Voice Guidance Kit Notice At Installation Checking the Contents Turning Off the Power of the Host Machine Installation Procedure Checking the Settings Operation Check Installing the Voice Operation Kit Notice At Installation Checking the Contents Turning Off the Power of the Host Machine Installation Procedure Checking the Settings Operation Check Installing the Wireless Network Interface Adapter Notice At Installation Checking the Contents Turning OFF the Power of the Host Machine Installation Procedure Attaching the Label Installing the IPSec Board Notice At Installation Checking the Contents Turning OFF the Power of the Host Machine Installation Procedure Chapter 3 Basic Operation 3.1 Construction Functional Construction Connecting the Main PCBs Basic Sequence Basic Sequence of Operation at Power-On Chapter 4 Main Controller 4.1 Construction Construction and Mechanisms Construction of the Electrical Circuitry Main Controller PCB HDD Start-Up Sequence Overview Shut-Down Sequence Overview...4-8

5 4.4.2 Flow of Operation Image Processing Overview of the Image Flow Construction of the Image Processing Module Reader Unit Input Image Processing Compression/Extension/Editing Block Printer unit Output Image Processing Flow of Image Data Flow of Image Data According to Copy Functions Flow of Image Data for the Box Function Flow of Image Data for the SEND Function Flow of Image Data for the Fax Transmission Flow of Image Data for the Fax Reception Function Flow of Image Data for the PDL Function Parts Replacement Procedure Image PCB Removing the Image PCB Main Controller PCB Before Removing the Main Controller PCB Removing the Main Controller PCB SDRAM Removing the SDRAM (for image processing) Removing the SDRAM (for system processing) HDD Removing the HDD Wireless LAN PCB Removing the Wireless LAN PCB IPSec PCB Removing the IPSec PCB PCI Bus Expansion PCB Before Removing the PCI Bus Expansion PCB Removing the PCI Bus Expansion PCB Voice Guidance PCB Removing the Voice Guidance PCB Voice Operation PCB Removing the Voice Operation PCB FAX Expansion PCB Removing the FAX Expansion PCB Chapter 5 Original Exposure System 5.1 Construction Specifications/controls/functions Major Components Configuration of Control System Reader Controller PCB Basic Sequence Basic Sequence at Power-On Basic Sequence at Start Key ON (book mode/1 original)

6 5.2.3 Basic Sequence at Start Key ON (ADF mode/1 original) Various Control Controlling the Scanner Drive System Overview Scanner Motor Control CCD Overview Enlargement/Reduction Magnifications in Main Scanning Direction Magnification in Sub Scanning Direction Detecting the Size of Originals Overview Control Details Detection Operation Overview Dirt Sensor Control Overview White Board Dust Detection Control Image Processing Overview CCD Drive Gain Correction and Offset Correction of CCD Output A/D Conversion of CCD Output Shading Correction (overview) Shading Adjustment Shading Correction Parts Replacement Procedure CCD Unit Removing the CCD Unit When Replacing the CCD Unit CCD Cover Unit Removing the CCD Cover Unit Copyboard glass Removing the Copyboard Glass When Replacing the Copyboard Glass Removing the ADF Reading Glass When Replacing the ADF Reading Glass Reader Controller PCB Points to Note Before Replacing the Reader Controller PCB Removing the Reader Controller PCB After Replacing the Reader Controller PCB LED Driver PCB Removing the LED Driver PCB Scanner Motor Removing the Scanner Motor Copyboard Cover Open/Close Sensor Removing the Copyboard Cover Open/Closed Sensor (Front/Rear) CCD HP Sensor Removing the CCD Unit HP Sensor Original Size Sensor

7 Removing the Original Size Sensor Reader Heater (option) Removing the Reader Heater (Right) Removing the Reader Heater (Left) Chapter 6 Laser Exposure 6.1 Construction Specifications/Controls/Functions Main Configuration Parts Control System Configuration Basic Sequence Basic Sequence Various Controls Controlling the Laser Activation Timing Laser ON/OFF Control Main Scanning Synchronous Control Controlling the Intensity of Laser Light APC Control Controlling the Laser Scanner Motor Laser Scanner Motor Control Controlling the Laser Shutter Laser Shutter Control Parts Replacement Procedure Laser Scanner Unit Before Removing the Laser Unit Removing the Laser Unit After Replacing the Laser Scanner Unit Chapter 7 Image Formation 7.1 Construction Specifications of the Image Formation System Major Components of the Image Formation System Image Formation Process Image Formation Process (outline) Image Formation Process (image formation) Basic Sequence Sequence of Operation (initial rotation) Sequence of Operation (copying) Sequence of Operation (last rotation) Image Stabilization Control Overview APVC Control ATVC Control PASCAL Control (image gradation) Drum Unit Outline of the Drum Unit Configuration

8 7.5.2 Charging Mechanism Controlling the Primary Charging Bias Primary Charging Roller Cleaning Mechanism Drum Cleaner Unit Photosensitive Drum Cleaning Developing Unit Configuration Controlling the Developing Bias Toner Container Configuration Route of Toner Supply Controlling the Drive of the Toner Cartridge Toner Supply Control Recovery Sequence Toner Level Detection Transfer Unit Outline of the Transfer Unit Outline Controlling the Transfer Bias Transfer Roller Bias Control Cleaning Transfer Roller Cleaning Mechanism Separation Mechanism Controlling the Static Eliminator Bias Transfer Mechanism Transfer Guide Bias Transfer Guide Bias Control Photosensitive Drum Cleaning Outline Collection of Waste Toner Checking the Waste Toner Box Parts Replacement Procedure Pre-Exposure Lamp Before Removing the Pre-Exposure Lamp Removing the Pre-Exposure Lamp Drum Unit Before Removing the Drum Unit Removing the Drum Unit After Replacing Drum Unit Hopper Assembly Before Removing the Hopper Unit Removing the Hopper Unit Sub Hopper Before Removing the Sub Hopper Removing the Sub Hopper Developing Assembly Before Removing the Developing Assembly Removing the Developing Assembly After Replacing Developing Assembly/Developing Cylinder

9 Developing Cylinder Before Removing the Developing Cylinder Removing the Developing Cylinder After Replacing Developing Assembly/Developing Cylinder Transfer Charging Roller Removing the Transfer Roller Waste Toner Box Removing the Waste Toner Container Toner Level Sensor Before Removing the Toner Level Sensor Removing the Toner Level Sensor Toner Feedscrew Motor Before Removing the Toner Feed Screw Motor Removing the Toner Feed Screw Motor Static Charge Eliminator Removing the Static Eliminator Chapter 8 Pickup/Feeding System 8.1 Construction Specifications, Controls, and Functions Division into Blocks Arrangement of Rollers Diagram of Paper Paths (w/ 3 Way Unit-A1/ copy tray) Diagram of Paper Paths (w/ Inbody Finisher/ copy tray) Diagram of Paper Paths (w/ Finisher/Saddle Finisher) Arrangement of Sensors Route of Drive Basic Sequence Basic Sequence Acceleration Intervals Detecting Jams Delay Jams Delay Jam Outside the Cassette Pickup Assembly Delay Jam in the Cassette Pickup Assembly Stationary Jams Common Stationary Jam Stationary Jam at Power-On Other Jams Door Open Jam Paper size mismatch JAM Error retry JAM Cassette Pick-Up Unit Overview Basic Sequence Identifying the Paper Size Setting Up the Universal Cassette Paper Level Sensor Manual Feed Pickup Unit

10 8.5.1 Overview Basic Sequence of Operation Identifying the Paper Size Paper Retaining Mechanism Registration Unit Overview Checking Horizontal Registration Duplex Feeding Unit Overview Sequence of Image Formation Flow of Paper Parts Replacement Procedure Pick-up Unit Before Removing the Pickup Unit Removing the Pickup Unit Pick-up Unit Before Removing the Pickup Unit Removing the Pickup Unit Pickup Roller Removing the Pickup Roller/Feed Roller/Separation Roller Sensor Mount Before Removing the Sensor Mounting Plate Removing the Sensor Mounting Plate Attaching the Sensor Mounting Plate Cassette Pick-up Motor Before Removing the Cassette Pickup Motor Removing the Cassette Pickup Motor Cassette Pick-up Motor Before Removing the Cassette Pickup Motor Removing the Cassette Pickup Motor Cassette Size Sensor Before Removing the Cassette Size Sensor Removing the Cassette Size Sensor Cassette Retry Paper Sensor Before Removing the Cassette Retry Paper Sensor Removing the Cassette Retry Paper Sensor Cassette Paper Sensor Before Removing the Cassette Paper Sensor Removing the Cassette Paper Sensor Cassette Paper Level Sensor (A/B) Before Removing the Cassette Paper Level Sensor (A/B) Removing the Cassette Paper Level Sensor (A/B) Slide Resistor Before Removing the Slide Resistor Removing the Slide Resistor Cassette Pickup Solenoid Before Removing the Cassette Pickup Solenoid Removing the Cassette Pickup Solenoid Manual Tray Assembly

11 Before Removing the Manual Feed Tray Unit Removing the Manual Feed Tray Unit When Replacing the Manual Feed Tray Manual Feed Unit Before Removing the Manual Feed Unit Removing the Manual Feed Unit Manual Pickup Roller Before Removing the Manual Feed Pickup Roller Removing the Manual Feed Pickup Roller Manual Feeder Pad Up/Down Solenoid Before Removing the Manual Feeder Pad Up/Down Solenoid Removing the Manual Feeder Pad Up/Down Solenoid (ir 3425/3235/3230) Removing the Manual Feeder Pad Up/Down Solenoid (ir 3225) Manual Pick-up Clutch Before Removing the Manual Feed Pickup Clutch (ir 3245/3235/3230) Removing the Manual Feed Pickup Clutch (ir 3245/3235/3230) Before Removing the Manual Feed Pickup Clutch (ir 3225) Removing the Manual Feed Pickup Clutch (ir 3225) Manual Separation Pad Before Removing the Manual Feed Separation Pad Removing the Manual Feed Separation Pad Registration Clutch Before Removing the Registration Clutch Removing the Registration Clutch Way Unit Before Removing the 3 Way Unit Removing the 3 Way Unit Feeding Roller Removing the Pickup Roller/Feed Roller/Separation Roller Vertical Path Roller Before Removing the Vertical Path Roller Removing the Vertical Path Roller Duplex Feed Roller Before Removing the Duplex Feed Roller Removing the Duplex Feed Roller Duplex Feed Motor Before Removing the Duplex Feed Motor (ir 3245/3235/3230) Removing the Duplex Feed Motor (ir 3245/3235/3230) Duplex Feed Sensor Before Removing the Duplex Feed Sensor Removing the Duplex Feed Sensor Duplex Feed Clutch Before Removing the Duplex Feed Clutch (ir 3225) Removing the Duplex Feed Clutch (ir 3225) Delivery Assembly Before Removing the Delivery Unit Removing the Delivery Unit Fixing/ Delivery Drive Assembly Before Removing the Fixing/Delivery Drive Unit

12 Removing the Fixing/Delivery Drive Unit Separation Roller Removing the Pickup Roller/Feed Roller/Separation Roller Chapter 9 Fixing System 9.1 Construction Specifications, Control Mechanisms, and Functions Major Components Basic Sequence Power-On Sequence Down Sequence Various Control Mechanisms Controlling the Speed of the Fixing Film Controlling the Fixing Film Speed in Response to Low Temperature Controlling the Fixing Film Speed Controlling the Fixing Film Temperature Controlling the Power Supply in Response to Low Temperature Controlling the Feeding in Response to Low Temperature Controlling the Power Supply at Start-Up Copying Temperature Control Changing the Fixing Film Control Temperature Temperature Control in Response to Automatic Double-Sided Copy Temperature Control in Response to Change of Paper Size Cleaning Fixing Film Cleaning Detecting the Passage of Paper Detecting the Passage of Paper Protective Functions Protective Functions Detecting an Error Parts Replacement Procedure Fixing Unit Before Removing the Fixing Unit Removing the Fixing Unit Pressure Roller Before Removing the Pressure Roller Removing the Pressure Roller Cleaning Roller Before Removing the Cleaning Roller Removing the Cleaning Roller Fixing Film Before Removing the Fixing Film Unit Removing the Fixing Film Unit Internal Delivery Sensor Before Removing the Internal Delivery Sensor Removing the Internal Delivery Sensor Fixing Film Sensor Before Removing the Fixing Film Sensor

13 Removing the Fixing Film Sensor Fixing Inlet Guide Before Removing the Fixing Inlet Guide Removing the Fixing Inlet Guide Chapter 10 External and Controls 10.1 Control Panel Overview LCD Indication Processing Adjusting the LCD Contrast Adjusting Fax Sound Volume USB Connection Function (USB connector (host) equipped) Functions of the Control Panel CPU Counters Overview Timing of Increasing the Count Fans Overview speed control Operation sequence Power Supply System Power Supply Power Supply Route Inside the Printer Power Supply Route in the Reader Unit Timing of Supply to the Reader Unit Connection to Options Heater operating condition Rated Output of the DC Power Supply PCB Rated Output of the 24V Power Supply PCB Rated Output of the 12V Power Supply PCB Rated Output of the Option Power Supply PCB Rated Output of the All-Night Power Supply PCB Protection Function Protective Functions Backup Battery Backup Battery Energy-Saving Function Overview Power Supply State SNMP Settings Parts Replacement Procedure External Covers Delivery Tray Delivery Tray Right Cover Delivery Tray Rear Cover Delivery Tray Rear Cover (Lower) Support Cover Support Cover (Right)

14 Right Cover (Lower Front) Right Cover (Rear) Inside Right Cover Inside Bottom Cover Front Cover Unit Rear Cover (Upper) Rear Cover (Lower) Left Cover Left Cover (Lower) Left Cover (Rear) Delivery Cover Toner Supply Cover Reader Left Cover Reader Right Cover Reader Front Cover Reader Rear Cover FAX Unit Cover Control Panel Inside Frame Control Panel Lower Cover Main Drive Assembly Before Removing the Main Drive Unit Removing the Main Drive Unit (ir 3245/3235/3230) Removing the Main Drive Unit (ir 3225) Power Supply Unit Before Removing the 12V Power Supply PCB Removing the 12V Power Supply PCB Before Removing the 24V Power Supply PCB Removing the 24V Power Supply PCB Control Panel Removing the Control Panel Unit Control Panel LCD Unit Before Removing the Control Panel LCD Removing the Control Panel LCD DC Controller PCB Removing the DC Controller PCB When Replacing DC Controller PCB Control Panel Inverter PCB Before Removing the Control Panel Inverter PCB Removing the Control Panel Inverter PCB Control Panel Key Switch PCB Before Removing the Control Panel KEY PCB Removing the Control Panel KEY PCB Control Panel CPU PCB Before Removing the Control Panel CPU PCB Removing the Control Panel CPU PCB Control Panel USB PCB Before Removing the Control Panel USB PCB Removing the Control Panel USB PCB FAX Unit

15 Removing the Fax Unit AC Driver PCB Before Removing the AC Driver PCB Removing the AC Driver PCB All Night Power Supply PCB Before Removing the All-Night Power Supply PCB Removing the All-Night Power Supply PCB Option Power Supply PCB Before Removing the Option Power Supply PCB Removing the Option Power Supply PCB Relay PCB Before Removing the Relay PCB Removing the Relay PCB High-Voltage PCB Before Removing the High-Voltage Power Supply PCB Removing the High-Voltage Power Supply PCB Power Supply Cooling Fan Before Removing the Power Supply Cooling Fan Removing the Power Supply Cooling Fan Exhaust Fan Removing the Exhaust Fan Fan Filter Removing the Exhaust Fan Filter Motor of Main Drive Assembly Before Removing the Main Motor (ir 3245/3235/3230) Removing the Main Motor (ir 3245/3235/3230) Before Removing the Main Motor (ir 3225) Removing the Main Motor (ir 3225) Fixing Driver Motor Removing the Fixing Driver Motor Right Door/Right Cover Releasing the Right Cover Removing the Right Cover Circuit Breaker Before Removing the Circuit Breaker Removing the Circuit Breaker Chapter 11 MEAP 11.1 MEAP Overview Changes Checking the Operating Environment Setting Up the Network Login to SMS Setting the method to login to SMS Checking Application List Starting and Stopping a MEAP Application Checking the Platform Information

16 MEAP Specifications MFID Checking the System Information of a MEAP Application with SMS Printing the System Information of a MEAP Application Reference (Application System Information) Installing an Application MEAP Enterprise Service Manager Adding a License File Disabling a License File (suspending a license) Downloading/Removing an Invalidated License File Reusable license License for forwarding Uninstalling an Application Login Service Changing Login Services Initializing the Password Creating a Backup for MEAP Application Area, Formatting the Hard Disk, Restoring the MEAP Application Area with the Backup, Using the SST (Service Support Tool) Replacing the Hard Disk Drive MEAP Safe Mode Setting HTTP port for MEAP application (level 2) USB keyboard support USB memory related functions(supported outside of Japan and Europe) Reference material Option for exclusive individual measure Chapter 12 e-maintenance/imageware Remote 12.1 e-maintenance/imageware Remote Overview Settings procedures Troubleshooting guide Service cautions Chapter 13 Maintenance and Inspection 13.1 Periodically Replaced Parts Overview Periodically Replaced Parts Durables and Consumables Overview ADF Reader Printer Unit Scheduled Servicing Basic Procedure Scheduled Servicing for Reader Unit Scheduled Servicing for the Printer Unit Cleaning Cleaning Fixing Entrance Guide

17 Cleaning the Mirror inside CCD Unit Cleaning Film Bias Static Eliminator Chapter 14 Standards and Adjustments 14.1 Image Adjustments Standards for Image Position Adjusting the Image Position Left End Margin Adjustment (each pickup position basis) Scanning System After Replacing the Reader Controller PCB or Initializing the RAM When Replacing the CCD Unit When Replacing the Copyboard Glass When Replacing the ADF Scanning Glass Laser Exposure System After Replacing the Laser Scanner Unit Image Formation System After Replacing Developing Assembly/Developing Cylinder After Replacing Drum Unit Electrical Components After Replacing the Hard Disk After Replacing the Main Controller When Replacing DC Controller PCB Pickup/Feeding System When Replacing the Cassette When Replacing the Duplex Unit When Replacing the Manual Feed Tray Registration of Paper Width Basic Value for Manual Feed Tray Chapter 15 Correcting Faulty Images 15.1 Making Initial Checks Installation Procedure Checking Paper Checking Paper Set Checking Consumables Checking Periodical Service Item Checking Each Unit/Each Function System Others Outline of Electrical Components Clutch/Solenoid Clutches and Solenoids (Reader) Clutches and Solenoids (Printer) Motor Motors (Reader) Motors (Printer) Fan Fans (Reader) Fans (Printer)

18 Sensor Sensors (Reader) Sensors (Printer) Switch Switches (Reader) Switches (Printer) Lamps, Heaters, and Others Lamps, Heaters, and Others (Reader) Lamps, Heaters, and Others (Printer) PCBs PCBs (Reader) PCBs (Printer) Connectors Connectors (1/6) Connectors (2/6) Connectors (3/6) Connectors (4/6) Connectors (5/6) Connectors (6/6) Variable Resistors (VR), Light-Emitting Diodes (LED), and Check Pins by PCB Variable Resistors (VR), Light-Emitting Diodes, and Check Pins by PCB Points to Note About the Leakage Breaker Chapter 16 Self Diagnosis 16.1 Error Code Details E000 to E197 (DC Controller) E202 to E248, E280 (Reader) E261 to E420 (DC Controller, Main Controller) E400, E413, E490 (ADF) E500 to E5F9 (Finisher) E602 (Error in HDD/encryption board) Detail in E E604 to E748 (Main Controller, DC Controller) E804 to E805 (DC Controller Control Fan) Error Code (SEND) Self-Diagnostic Display List of Error Codes without Messages Jam Code Jam codes (printer unit) Jam Code (ADF) Jam codes (Finisher) Alarm Code Alarm Code Chapter 17 Service Mode 17.1 Outline Construction of Service Mode

19 Starting Service Mode and Making Selections Ending Service Mode Back-Up Initial Screen nd/3rd Item Screen th Item Screen DISPLAY (Status Display Mode) COPIER COPIER > DISPLAY > VERSION COPIER > DISPLAY > ACC-STS COPIER > DISPLAY > ANALOG COPIER > DISPLAY > CST-STS COPIER > DISPLAY > JAM COPIER > DISPLAY > ERR COPIER > DISPLAY > HV-STS COPIER > DISPLAY > CCD COPIER > DISPLAY > SENSOR COPIER > DISPLAY > ALARM COPIER > DISPLAY > ENVRNT FEEDER FEEDER > DISPLAY I/O (I/O Display Mode) Outline <DC-CON> <R-CON> <FEEDER> <SORTER> <MN-CONT> ADJUST (Adjustment Mode) COPIER COPIER > ADJUST > AE COPIER > ADJUST > ADJ-XY COPIER > ADJUST > CCD COPIER > ADJUST > LASER COPIER > ADJUST > DEVELOP COPIER > ADJUST > DENS COPIER > ADJUST > BLANK COPIER > ADJUST > PASCAL COPIER > ADJUST > HV-PRI COPIER > ADJUST > HV-TR COPIER > ADJUST > FEED-ADJ COPIER > ADJUST > CST-ADJ COPIER > ADJUST > FIXING COPIER > ADJUST > MISC FEEDER FEEDER > ADJUST SORTER SORTER > ADJUST FUNCTION (Operation/Inspection Mode)

20 COPIER Points To Note When Operate The Service Mode (FUNCTION) COPIER > FUNCTION > INSTALL COPIER > FUNCTION > CCD COPIER > FUNCTION > DENS COPIER > FUNCTION > DPC COPIER > FUNCTION > CST COPIER > FUNCTION > FIXING COPIER > FUNCTION > PANEL COPIER > FUNCTION > PART-CHK COPIER > FUNCTION > CLEAR COPIER > FUNCTION > MISC-R COPIER > FUNCTION > MISC-P COPIER > FUNCTION > SYSTEM FEEDER FEEDER > FUNCTION OPTION (Machine Settings Mode) COPIER COPIER > OPTION > BODY (1/15) COPIER > OPTION > BODY (2/15) COPIER > OPTION > BODY (3/15) COPIER > OPTION > BODY (4/15) COPIER > OPTION > BODY (5/15) COPIER > OPTION > BODY (6/15) COPIER > OPTION > BODY (7/15) COPIER > OPTION > BODY (8/15) COPIER > OPTION > BODY (9/15) COPIER > OPTION > BODY (10/15) COPIER > OPTION > BODY (11/15) COPIER > OPTION > BODY (12/15) COPIER > OPTION > BODY (13/15) COPIER > OPTION > BODY (14/15) COPIER > OPTION > BODY (15/15) COPIER > OPTION > USER (1/7) COPIER > OPTION > USER (2/7) COPIER > OPTION > USER (3/7) COPIER > OPTION > USER (4/7) COPIER > OPTION > USER (5/7) COPIER > OPTION > USER (6/7) COPIER > OPTION > USER (7/7) COPIER > OPTION > CST COPIER > OPTION > ACC COPIER > OPTION > INT-FACE (1/2) COPIER > OPTION > INT-FACE (2/2) COPIER > OPTION > COMBO COPIER > OPTION > LCNS-TR FEEDER FEEDER > OPTION SORTER

21 SORTER > OPTION BOARD BOARD > OPTION TEST (Test Print Mode) COPIER COPIER > TEST > PG COPIER > TEST > NETWORK COPIER > TEST > NET-CAP COUNTER (Counter Mode) COPIER COPIER > COUNTER > TOTAL COPIER > COUNTER > PICK-UP COPIER > COUNTER > FEEDER COPIER > COUNTER > JAM COPIER > COUNTER > MISC COPIER > COUNTER > DRBL COPIER > COUNTER > DRBL Chapter 18 Upgrading 18.1 Outline Outline of Upgrading the Machine Outline of the Service Support Tool Points to Note at Time of Downloading Making Preparations Installing the System Software (System CD -> SST) Installing the System Software (SST -> USB) Making Connections (SST in use) Making Connections (USB device in use) Formatting the HDD Formatting All Partitions Formatting Selected Partitions Formatting Procedure Downloading System Software Downloading the System Software (ALL) Outline Downloading Procedure Downloading the System Software (Single) Downloading Procedure Downloading Dcon and Rcon Outline Downloading G3 FAX Outline Uploading and Downloading Backup Data Outline Uploading Procedure Downloading Procedure Version Upgrade using USB Overview of Menus and Functions

22 Points to Note Downloading/Writing the System Software (auto) Downloading the System Software (Confirmation execution when version is downed the same version) Downloading the System Software (all overwriting) Formatting the HDD Other Functions Chapter 19 Service Tools 19.1 Service Tools Special Tools Oils and Solvents

23 Finisher, Sorter, Delivery Tray 3-Way Unit-A1/A2 SERVICE MANUAL JULY 2008 REV. 0 COPYRIGHT 2008 CANON INC CANON 3-Way Unit-A1/A2 REV. 0 PRINTED IN U.S.A.

24 Finisher, Sorter, Delivery Tray Inner 2-Way Tray-D1 SERVICE MANUAL JULY 2008 REV. 0 COPYRIGHT 2008 CANON INC CANON Inner 2-Way Tray-D1 REV. 0 PRINTED IN U.S.A.

25 Cassette Feeding Unit-Y1/Y2/Y3 SERVICE MANUAL JULY 2008 REV. 0 COPYRIGHT 2008 CANON INC. CANON Cassette Feeding Unit-Y1/Y2/Y3 REV. 0 PRINTED IN U.S.A.

26 PARTS CATALOG ir3245/3235/3230/3225 Series Dec

27 NUMERICAL INDEX ir3245/3235/3230/3225 Series(Numerical Index) ir3245/3235/3230/3225 Series(Parts Catalog) A1 ASSEMBLY LOCATION DIAGRAM A2 OPTION PARTS CATALOG LIST ACCESSORIES EXTERNAL COVERS, PANELS, ETC MACHINE FRONT PLATE INTERNAL COMPONENTS INTERNAL COMPONENTS INTERNAL COMPONENTS MACHINE REAR PLATE MACHINE REAR PLATE MACHINE REAR PLATE RIGHT DOOR ASSEMBLY PAPER FEEDER FRAME ASSEMBLY CONTROL PANEL ASSEMBLY POWER CORD TERMINAL ASSEMBLY RIGHT LOWER DOOR ASSEMBLY MAIN DRIVE ASSEMBLY (ir3225 Series) MAIN DRIVE ASSEMBLY (ir3245/3235/3230 Series) DUPLEXING DRIVE ASSEMBLY (ir3245/3235/3230 Series) FIXING DELIVERY DRIVE ASSEMBLY CASSETTE CASSETTE PAPER PICK-UP ASSEMBLY PAPER PICK-UP ASSEMBLY MULTI FEED TRAY ASSEMBLY PAPER DELIVERY ASSEMBLY ND/3RD DELIVERY ASSEMBLY ND UPPER DELIVERY ASSEMBLY ND DELIVERY FRAME ASSEMBLY RD DELIVERY FRAME ASSEMBLY CASSETTE HEATER ASSEMBLY READER ASSEMBLY LASER SCANNER ASSEMBLY DRUM CARTRIDGE ASSEMBLY HOPPER ASSEMBLY

28 640 DEVELOPING ASSEMBLY FIXING ASSEMBLY CONTROLLER BOX ASSEMBLY MAIN POWER SUPPLY PCB ASSEMBLY DC CONTROLLER PCB ASSEMBLY READER CONTROLLER PCB ASSEMBLY MAIN CONTROLLER PCB ASSEMBLY IMAGE PCB ASSEMBLY RELAY DELIVERY CONT. PCB ASS'Y A01 DADF MOUNTING HARDWARE (ADF model) A10 INTERNAL COMPONENTS (ADF model) A11 BASE ASSEMBLY (ADF model) A12 PAPER PICK-UP COVER ASSEMBLY (ADF model) A13 DOCUMENT TRAY ASSEMBLY (ADF model) A21 DRIVE ASSEMBLY (ADF model) A41 FEEDER ASSEMBLY (ADF model) A90 ADF CONTROLLER PCB ASSEMBLY (ADF model) T21 ATTACHMENT PARTS (FAX model) T22 FAX ASSEMBLY (FAX model) T23 SPEAKER ASSEMBLY (FAX model)

29 FIGURE A1 ASSEMBLY LOCATION DIAGRAM MULTI FEED TRAY ASSMBLY RIGHT DOOR ASSEMBLY PAPER FEEDER FRAME ASSEMBLY 116 RIGHT LOWER DOOR ASSEMBLY 145 READER CONTROLLER PCB ASSEMBLY 931 READER ASSEMBLY 400 CONTROL PANEL ASSEMBLY 130 POWER CORD TERM NAL ASSEMBLY 140 CASSETTE CASSETTE

30 Canon imagerunner 3225, 3230, 3235, 3245 service manual Canon imagerunner 3225, 3230, 3235, 3245 service manual Canon imagerunner 3225, 3230, 3235, 3245 service manual Canon imagerunner 3225, 3230, 3235, 3245 service manual Canon imagerunner 3225, 3230, 3235, 3245 service manual Canon imagerunner 3225, 3230, 3235, 3245 service manual Canon imagerunner 3225, 3230, 3235, 3245 service manual Canon imagerunner 3225, 3230, 3235, 3245 service manual Canon imagerunner 3225, 3230, 3235, 3245 service manual