Overview Accessories Product System Version / Product Line Material Page

Transcription

1 09.1

2 Overview Product System Version / Product Line Material Page Serrated Screws Countersunk Machine Screw DIRAK Standard Parts POM, natrual PA, black Wire catch PA, black Key zinc die, untreated or PA, black NEW Multi Key zinc die, untreated Telescopic Cover Support long Telescopic Cover Support short Telescopic Cover Support Cover stay, nickel plated Telescopic Stay

3 Overview Product System Version / Product Line Material Page Wind stop Drawing pocket PS, impact proof Window Macrolon

4 6 040 Serrated screws Hexagon screw with underhead serrations with Phillips/slot head. Versions with powder locking dot on request. property class 5.8 or AISI 304 d L k D tool size Stainless steel version M5 6/ / / / M5 8/ / / / M6 6/ / / / * M6 7/ / / / M6 8/ / / / M6 10/ / / / M6 16/ / / / M6 20/ / / / M6 25/ / / / M6 30/ / / / M6 35/ / / / ** M6 40/ / / / M6 50/ / / / M8 10/ / / / * This screw is only available with hexagon head. ** As long as stock lasts, hexagon head property class

5 6 041 Countersunk machine Screw DIN 965, white Dimension zinc plated white (blue) Fe / Zn 6 cb M5 x M5 x M5 x M5 x M5 x M6 x M6 x M6 x M6 x M6 x M6 x M6 x M8 x M8 x M8 x M8 x M8 x M8 x Hex. nut DIN 934 8,8 zinc plated self locking Hex. nut DIN 985 8,8 zinc plated M M Minimum order quantity: 200 pieces 09.5

6 6 050 DIRAK Standard Parts a) Pin: POM b) Bushings: PA,natural c) Bushings: PA, black d) Roller: PA, black or e) Rivet: or stainless steel Length L mm / inch Part No. a) Hinge pin with self securing 31 / / / / b) Bushings c) Bushings, clip in Fitting bore Ø for Round Rods Ø Fitting bore Ø for Round Rods Ø d) Roller PA, black e) Rivet: L L1 D for Round Rods Ø8 20,5 / / Ø7,5 / Stainless steel for Round Rods Ø8 20,5 / / Ø7,5 / Steel, zinc plated for flat rods 3mm 15,5 / / Ø6 /

7 6 060 Wire catch Polyamide Wire-Catch for cable management inside cabinets. The Wire-Catches can be fitted onto pre-punched channels/profiles. Time-saving installation. Automatic, built-in catch device to prevent widening. Advantages: Easy installation in a suitable square hole by turning 45. The jamming of the bow parts in the range of the opening when the cable support is filled. In the end this increases the stability and possibly avoids a breaking. Installation: Enter the wire-catch in an angle of about 45 into the cutout and turn 45 clockwise. At this end position the special shape makes the wire-catch fixed in the cutout. PA, black Version Part No. a) Wire catch 9,5x9, b) Wire catch 12,5x10,5 (as drawn) Other cutouts and sheet thicknesses on request. 09.7

8 6 100 Key Keys for Quarter-Turns, 200 and 220 series and for inserts see page A), B), C) and F) Key: zinc die, untreated D) and E) Polyamide key: PA, black 09.8

9 6 100 Key Form Key type Size d Part No. A Double bit 3mm pin mm pin B Female key, hollow Square / Square / Square / Triangular / Triangular 6.5 CNOMO 14.2 / Triangular / Triangular / Triangular 9 EDF 15,9 / Hex Belcore 7/ / Daimler Benz type 11.5 / Crown type 15.9 / Crescent Czech 15.9 / Male key for insert socket square 6mm Male key for insert socket square 7mm Male key for insert socket square 8mm Male key 5/16 (8mm) with hole for 3mm pin (for inserts and , also for socket hex 8. without pin) Emergency key for dual-cylinder-handle (without drawing) For orders of 2000 pieces and over, we can supply this key with your logo. Please ask for more details. Order example: company name/logo C Female key, hollow Square 6mm Triangular For orders of 2000 pieces and over, we can supply this key with your logo. Please ask for more details. D Double bit 3mm pin mm pin E Double bit Square / Logo on both sides Square / * Square / * Triangular / Triangular / * Triangular / * Screwdriver type 10 x 1, For orders of 5000 pieces and over, we can supply this key with your logo. Please ask for more details. F Key FIAT *These female keys cannot be used with the safety quarter-turn page and hinged recessed handle page

10 Notes

11 6 101 Multi Key Multi Key for inserts. Triangular 8 Square 6 Square 8 Double bit 5 Multi Key zinc die, untreated Part No. Multi Key

12 Telescopic Cover Support long, steel zinc plated Telescopic Cover Support for covers and desk-leafs with automatic locking and release device. Extending the telescopic cover support completely, the concealed catch lever automatically gets into the locking position. A 3cm retraction makes the support engaging safely. Renewed extending, makes the catch lever getting into the free-run position and the telescopic cover support can be retracted. HD design: cam plates individually riveted and catch laver made of stainless steel. RH and LH application. Inner and outer rails, mounting angles and cam plates: Catch lever: stainless steel (cast) Version Length L, retracted Length L, extented, engaged Length L, extended Part No. Telescopic Cover Support, long 395±2 / ±2 / ±2 / see page Examples of application approx. Dimension a approx. Dimension b Angle / / Angle / / Angle / / Angle / / The stated dimensions are only valid in the shown assembly situation. (Hinge / 9302) Changing the assembly situation makes own tests necessary. Opening angle can be varied by changing dimensions a and b

13 Telescopic Cover Support short, steel zinc plated Telescopic Cover Support for covers and desk-leafs with automatic locking and release device. Extending the telescopic cover support completely, the concealed catch lever automatically gets into the locking position. A 3cm retraction makes the support engaging safely. Renewed extending, makes the catch lever getting into the free-run position and the telescopic cover support can be retracted. HD design: cam plates individually riveted and catch laver made of stainless steel. RH and LH application. Inner and outer rails, mounting angles and cam plates: Catch lever: stainless steel (cast) Version Length L, retracted Length L, extented, engaged Length L, extended Part No. Telescopic Cover Support, short 215±2 / ±2 / ±2 / see page Examples of application approx. Dimension a approx. Dimension b Angle / / Angle / / Angle / / Angle / / The stated dimensions are only valid in the shown assembly situation. (Hinge / 9302) Changing the assembly situation makes own tests necessary. Opening angle can be varied by changing dimensions a and b

14 6 174 Telescopic Cover Support Telescopic Cover support with automatic multiple stops and automatic relesase in the end position, for desk-leafs and covers. RH or LH application. Mounting examples see page Note: To release the mechanism, the cover stay has to be extended completely. a) and a1) Telescopic Cover Support: b) Mounting angle: Stop L extended L extended / / / / / / / / / / / / / / / Version Number Length L Length L of stops retracted extended Part No. a) Telescopic Cover Support, short / / a1) Telescopic Cover Support, long / / spacers for M6 srews included. b) Mounting angle with 1 screw and one selflocking nut

15 6 180 Cover stay steel, nickel plated Cover stay screw-on or weld-on Cover stay: steel, nickel plated Version Part No. RH (as drawn) LH (mirror view)

16 6 190 Telescopic Stay Telescopic stay for doors and lids. RH and LH application. For wide lids with 2 cover stays you can release the 2 stops by installing 2 eyelets connected by a steel wire. Dimensions X and Y determine the opening angle. An example is illustrated. a) and a1) Outer part: Inner part: Mounting angle: Snap lever: Snap spike: Spring: stainless steel Screws and washer: b) Eyelet: Version Length L, Length L, Dimension Dimension Opening Part No. see page retracted extended X Y angle a) Telescopic Stay 370/ / / / a1) Telescopic Stay 215/ / / / b) Eyelet Other length L on request. Stainless steel version

17 6 200 Wind stop Wind-Stop with automatic lock. RH or LH application. Wind stop: Fastening dimensions Dimension X mm / inch Dimension Y mm / inch minimal door width mm / inch see page Angle / / / Angle / / / Angle / / / Angle / / / Important: For other configurations: Y = X + min. 40 Part No. Wind stop Stainless steel version

18 6 220 Drawing Pocket Self adhesive drawing pocket for heavy duty applications. a) with two 6mm holes, A4 format b) with 9x6mm oblong holes a) and b) Drawing pocket: PS, impact proof Version A B C D Part No. a) grey 250 / / / / b) grey (RAL 7035) 320 / / / / orange (RAL 2000)

19 6 227 Window Makralon Window, clip-in, for door-thickness 0.8 to 2.5mm (0.031 to 0.098). Window: Macrolon Seal: NBR Version Part No. Window complete with seal Window without seal Seal

20 Notes 09.20

21 Zapirna tehnika 4226 ŽIRI, Bedrih 27 T/F M info@metalika-kacin.com ZAPIRAMO - ODPIRAMO - PODPIRAMO - POVEZUJEMO Široka izbira OKOVJA IN PRIBORA za proizvodnjo stikalnih in krmilnih omar, ohišij za elektroopremo, elektroniko, telekomunikacijsko, tehnološko, klimatsko in drugo tehniko, za vgradnjo pri izdelavi strojne opreme in vozil. Klju čavnice, zapirala, zapirni sistemi Tekalna kolesa - stabilna, vrtljiva Te čaji, klavirski šarnirji, spone Standardni vpenjalni elementi Ro čaji, pribor, zatezna zapirala Adapteri za polnjenje plinskih medijev Tesnilni gumijasti profili Plastični čepi, vijaki in elementi Plinske vzmeti, amortizerji Teleskopska kroglična vodila Transportni valjčki in transportna oprema Priporoča se ekipa Metalike Kacin. T/F 04 / info@metalika-kacin.com