CM - DCM GENERAL DATA. Applications. Constructions features
|
|
|
- Florence Thomasine Wood
- 5 years ago
- Views:
Transcription
1 CM - DCM GENERL DT pplications Circulating pups with IN-LINE connections, suitable for civil and industrial installations for heating, conditioning, refrigeration and clean and safe water. vailable in single and twin version. Constructions features Flanged suction and delivery connections in PN - PN with threaded holes for control pressure gauges. Cast iron pup casing and otor support, cast iron or technopolyer ipeller. Stainless steel otor sha. synchronous threephase otor, poles, closed and cooled with external ventilation. Three-phase otors should be protected with a suitable overload protection coplying with the regulations in force. Protection: IP - IP sulation class: F DB PUMPS reserves the right to ake odifications without notice. 9
2 TECNICL DT N. 7 PRTS* PUMP BODY SUPPORT IMPELLER SFT WIT ROTOR MECNICL SEL OR GSKET MTERILS CST IRON ISO UNI CST IRON ISO UNI CST IRON ISO UNI x CM ---- TECNOPOLYMER B x CM - STINLESS STEEL ISI X Cr Ni - UNI 9/7 CRBON/CERMICS EPDM RUBBER 7 * contact with the liquid. - Operating range: fro, to /h with head up to eters. - Liquid quality requireents: clean, free fro solids or abrasive substances, non viscous, non aggressive, non crystallized, cheically neutral, close to the characteristics of water - ax glycol % (for different glycol percentage please contact our technical service). - Liquid teperature range: - C + C (CM) - C + C (DCM) - Maxiu abient teperature: + C - Maxiu working pressure: CM /T - CM /T - CM /7T - CM /T PN DCM PN the rest of the range - Flanging: PN - Special versions on request: different voltages and/or frequencies - Classification index: (exaple) Twin execution D C M T Circulator C M BQE, Circulator -pole otor -pole otor (DN) noinal diaeter of the flanged connections (DN) noinal diaeter of the flanged connections Maxiu head (c) Maxiu head (c) - Cast iron ipeller B - Bronze ipeller Mechanical seal Three-phase otor P (otor - ) - stallation: with otor fitted horizontally or vertically as long as it s always above the pup. with otor fitted vertically for P > CM DCM DB PUMPS reserves the right to ake odifications without notice.
3 The perforance curves are based on kineatic viscosity values = /s and density equivalent to kg/. Tolerance of curves to ISO 99. CM Liquid teperature range: fro - C to + C fro - C to + C Maxiu teperature operating: + C P kpa 7 Q US gp Q IMP gp CM /T CM /T CM /7 CM /7 CM / CM / Counterflanges on request Q /h NPS NPS CM / CM / CM /T CM /7 CM /T CM /7 Q /h % CM / CM / CM /7 CM /T CM /T CM /7 Q /h P CM /T,,, CM /T,, CM /7 CM /7, CM /, CM / Q /h Q l/s Q l/in CM / T CM / T CM /7 T CM /7 T CM / T CM / T L L L B B B D D D D D PCKING DIMENSIONS L/ L/B PN, PN, PN fori, PN Ø, 7 PN 7, 7 PN 7, WEIGT Kg CM / T CM / T CM /7 T CM /7 T CM / T CM / T VOLTGE z r.p.. /in. P MX P NOMINL P Q /h,,,,, 7,, 9,,,, l/in 7 7 x- V,,7,,-,,,,,,,,,, x- V,,7,,-,,,,,,,,,, x- V,9,7,,-,,7,7,7,,,,,, x- V,,7,,-, (),7,7,,,,, 7,9 7, x- V,,,,-,,9,,,,,,, 9, 9, 9,, 7,, x- V,,9,,-,,,,,,,,7,,9,, 9,, DB PUMPS reserves the right to ake odifications without notice.
4 The perforance curves are based on kineatic viscosity values = /s and density equivalent to kg/. Tolerance of curves to ISO 99. DCM Liquid teperature range: fro - C to + C Maxiu teperature operating: + C P kpa 7 9 Q US gp 7 Q IMP gp DCM /T DCM /T DCM /T Counterflanges on request NPS Q /h Q /h η% DCM /T DCM /T DCM /T DCM /T DCM /T DCM /T Q /h P DCM /T,,, DCM /T,, DCM /T, 7 9 Q /h Q l/s NPS Q l/in DCM / T DCM / T DCM / T L L L B B B N D D D D D PCKING DIMENSIONS L/ L/B PN, fori PN, Ø PN, WEIGT Kg DCM / T DCM / T DCM / T VOLTGE z r.p.. /in. P MX P NOMINL P Q /h,,, 9, l/in 7 7 x- V,,,,-,,,7,,, x- V,,,,-, (),,,,, x- V,,,,-,,,,,,9, DB PUMPS reserves the right to ake odifications without notice.
5 The perforance curves are based on kineatic viscosity values = /s and density equivalent to kg/. Tolerance of curves to ISO 99. CM Liquid teperature range: fro - C to + C fro - C to + C Maxiu teperature operating: + C P kpa Q US gp 7 Q IMP gp CM /T CM /7T CM / 7 7 CM /7 CM / CM / Counterflanges on request Q /h NPS NPS CM / CM /7T CM /7 CM / CM /T CM / Q /h % CM / CM /7T CM /7 CM / CM / CM /T Q /h P, CM /T, CM /7T,, CM /, CM /7, CM / CM / Q /h Q l/s Ql/in CM / T CM / T CM /7 T CM / T CM /7 T CM / T L L L B B B D D D D D PCKING DIMENSIONS L/ L/B PN,, PN,, PN fori,, PN Ø,, 9 9 PN, 9 9 PN, WEIGT Kg CM / T CM / T CM /7 T CM / T CM /7 T CM / T VOLTGE z r.p.. /in. P MX P NOMINL P x- V,,7,,-,,,,,,, x- V,,7,,-,,,,,,,, Q /h,,, 7,, 9,,,, l/in 7 7 x- V 7,,7,,-, 7,7 7, 7, 7,,,, x- V 7,,7,,-, (),, 9, 9, 9,,, 7,, x- V,,,,-,,7,,,,7,,7,, 9,, x- V,,,,-,,,,9,7,,,,,7,, DB PUMPS reserves the right to ake odifications without notice.
6 The perforance curves are based on kineatic viscosity values = /s and density equivalent to kg/. Tolerance of curves to ISO 99. DCM Liquid teperature range: fro - C to + C Maxiu teperature operating: + C P kpa Q US gp Q IMP gp 9 9 DCM /T 7 7 DCM /T DCM /T Counterflanges on request Q /h NPS DCM /T NPS DCM /T DCM /T Q /h η% DCM /T DCM /T DCM /T Q /h P, DCM /T, DCM /T,, DCM /T, Q /h Q l/s 7 Q l/in DCM / T DCM / T DCM / T L L L B B B N D D D D D PCKING DIMENSIONS L/ L/B 7 7 PN,7 7 7 PN holes Ø,7 7 PN,9 WEIGT Kg DCM / T DCM / T DCM / T VOLTGE z r.p.. /in. P MX P NOMINL P Q /h 9,, l/in 7 x- V,,,,-,,,,,9,,, x- V,7,7, -, (),,,,,,, x- V,79,,7,-,,,, 7,7 7,,9,9 DB PUMPS reserves the right to ake odifications without notice.
7 The perforance curves are based on kineatic viscosity values = /s and density equivalent to kg/. Tolerance of curves to ISO 99. CM Liquid teperature range: fro - C to + C Maxiu teperature operating: + C CM -//BQE/, 7 M 7 9 7,, CM -//BQE/,7 7 M 7 9 7,, CM -//BQE/, 7 9 M 7 9 7, 7,9 CM -7//BQE/, 7 9 M 7 9 7, 7, CM -9//BQE/,7 7 9 M 7 9 7, 9,7 CM -//BQE/, 7 7 7, 7, M 7 9 7,, CM -//BQE/, , 7, M 7 9 7,,9 CM -//BQE/, , 7, M 7 9 7, 9, CM -//BQE/ , 7, M 7 9 7, 9, CM -//BQE/ , 7, M 7 9 7,,7 CM -//BQE/, x- V,,, MEC 7,-,,-,7,7 CM -//BQE/,7 x- V,,7, MEC 7,-,7,-,7,,7 CM -//BQE/, x- V,,,7 MEC,-,7,-,,,7 CM -7//BQE/, x- V 9,,,7 MEC,-,,-,,,7 CM -9//BQE/,7 x- V 9,,7 MEC,-,,- 7,7 CM -//BQE/, x- V,,, MEC,-,9-,9 7,77 CM -//BQE/, x- V,9, MEC 9L,-,7-7, 7,7 CM -//BQE/, x- V,, MEC 9L,7-, 7-7 7,7 CM -//BQE/ x V, MEC 7, 7,79 CM -//BQE/ x V,7, MEC,,, Star start ( Y ) is possible DIMENSIONS DB PUMPS reserves the right to ake odifications without notice. PCKING DIM. B B B C D D D S holes L L L M L\ L\B VOLTGE z r.p.. /in P MX P NOMINL P MOTOR SIZE I st. ax % WEIGT cos
8 The perforance curves are based on kineatic viscosity values = /s and density equivalent to kg/. Tolerance of curves to ISO 99. DCM Liquid teperature range: fro - C to + C Maxiu teperature operating: + C Q US gp Q IMP gp P kpa 9 9 DCM /9T DCM /T 7 7 DCM /7T Counterflanges on request NPS 7 Q /h 7 Q /h η% 7 DCM /7T DCM /9T DCM /T DCM /7T DCM /9T DCM /T 7 Q /h, DCM /9T P, DCM /T,, DCM /7T,, 7 Q /h Q l/s NPS Q l/in DCM /7 T DCM / T DCM /9 T L L L B B B N D D D D D PCKING DIMENSIONS L/ L/B PN, holes PN, Ø PN, 7 WEIGT Kg DCM /7 T DCM / T DCM /9 T VOLTGE z r.p.. /in. P MX P NOMINL P Q /h, 7 l/in x- V,79,,7,-,,7,,,,,, x- V,,7,- (),, 7,9 7,7 7,,,, x- V,,9,,-, 9,,9,,, 7,7 7,, DB PUMPS reserves the right to ake odifications without notice.
9 The perforance curves are based on kineatic viscosity values = /s and density equivalent to kg/. Tolerance of curves to ISO 99. CM Liquid teperature range: fro - C to + C Maxiu teperature operating: + C CM -//BQE/, M 9 7,, CM -//BQE/, M 9 7,, CM -7//BQE/, 7 7 M 7 9 7, 9, CM -9//BQE/, M 7 9 7, 9, CM -//BQE/, M 7 9 7, CM -//BQE/ M 7 9 7,, CM -7//BQE/ M 7 9 7,, CM -//BQE/, M 9,, CM -7//BQE/7, M 9, 9, CM -//BQE/ M 9, 9, CM -//BQE/, x- V 9,,,7 MEC,-,,-, 7,7 CM -//BQE/,7 x- V 9,,7 MEC,-,- 7,,7 CM -7//BQE/, x- V,,, MEC,-,9-,9 7,77 CM -9//BQE/, x- V,9, MEC 9L,-,7-7, 7,7 CM -//BQE/, x- V, MEC 9L,7-, 7-7 7,7 CM -//BQE/ x V MEC 7, 7,79 CM -7//BQE/ x V,, MEC,,, CM -//BQE/, x V,7, 7, MEC,7 7,, CM -7//BQE/7, x V,9 7, MEC M,, CM -//BQE/ x V MEC M, Star start is possible DIMENSIONS DB PUMPS reserves the right to ake odifications without notice. 7 PCKING DIM. B B B C D D D S holes L L L M L\ L\B VOLTGE z r.p.. /in P MX P NOMINL P MOTOR SIZE I st. ax % WEIGT cos
10 The perforance curves are based on kineatic viscosity values = /s and density equivalent to kg/. Tolerance of curves to ISO 99. DCM Liquid teperature range: fro - C to + C Maxiu teperature operating: + C Q US gp Q IMP gp P kpa 9 9 DCM /T DCM /T 7 7 DCM /7T DCM /T Counterflanges on request Q /h NPS NPS DCM /7T DCM /T DCM /T DCM /T Q /h η% 7 Q /h P DCM /T,, DCM /T DCM /T DCM /7T DCM /T DCM /T DCM /7T DCM /T Q /h Q l/s Q l/in DCM / T DCM /7 T DCM / T DCM / T L L L B B B N D D D D D PCKING DIMENSIONS L/ L/B 7 PN, 7 7 PN holes, 7 7 PN Ø, 79 7 PN, WEIGT Kg DCM / T DCM /7 T DCM / T DCM / T VOLTGE z r.p.. /in. P MX P NOMINL P Q /h 7 l/in 7 9 x- V,,7,-,,,9,,9,, x- V,,9,,-, 7, 7, 7,,,,,9 x- V,,,,-, (),,,,, 7,,,, x- V,9,,-,, 9,9 9, 9, 9,, 7,7, DB PUMPS reserves the right to ake odifications without notice.
11 The perforance curves are based on kineatic viscosity values = /s and density equivalent to kg/. Tolerance of curves to ISO 99. CM Liquid teperature range: fro - C to + C Maxiu teperature operating: + C CM -//BQE/,7 7 M 7 9 7, 99,9 CM -//BQE/, 7 M 7 9 7,,7 CM -//BQE/, M 7 9 7,, CM -//BQE/, M 7 9 7,, CM -//BQE/ M 7 9 7, 9, CM -//BQE/ M 7,9, CM -//BQE/, M 7,9, CM -//BQE/7, M 9, 9, CM -//BQE/ M 9,, CM -9//BQE/ M 9,, CM -//BQE/, M 9, CM -//BQE/ M 9, 9 CM -//BQE/,7 x- V,7 MEC,-,- 7, CM -//BQE/, x- V,,, MEC,-,9-,9 7,77 CM -//BQE/, x- V,9, MEC 9L,-,7-7, 7,7 CM -//BQE/, x- V, MEC 9L,7-, 7-7 7,7 CM -//BQE/ x V MEC 7, 7,79 CM -//BQE/ x V,, MEC,,, CM -//BQE/, x V,7, 7, MEC,7 7,, CM -//BQE/7, x V,9 7, MEC M,, CM -//BQE/ x V MEC M, CM -9//BQE/ x V 7 MEC L 7,7 9, CM -//BQE/, x V, MEC L, 9, CM -//BQE/ x V MEC L 99,, Star start is possible DIMENSIONS DB PUMPS reserves the right to ake odifications without notice. 9 PCKING DIM. B B B C D D D S holes L L L M L\ L\B VOLTGE z r.p.. /in P MX P NOMINL P MOTOR SIZE I st. ax % WEIGT cos
12 The perforance curves are based on kineatic viscosity values = /s and density equivalent to kg/. Tolerance of curves to ISO 99. DCM Liquid teperature range: fro - C to + C Maxiu teperature operating: + C Q US gp Q IMP gp P kpa DCM /T DCM /T 9 DCM /T 7 DCM /T Counterflanges on request Q /h NPS NPS DCM /T DCM /T DCM /T DCM /T Q /h η% DCM /T 7 DCM /T DCM /T DCM /T Q /h P DCM /T DCM /T DCM /T DCM /T Q /h 7 Q l/s Q l/in DCM / T DCM / T DCM / T DCM / T L L L B B B N D D D D D PCKING DIMENSIONS L/ L/B 9 7 PN, 9 7 PN holes, 9 7 PN Ø, 9 7 PN, WEIGT Kg DCM / T DCM / T DCM / T DCM / T VOLTGE z r.p.. /in. P MX P NOMINL P Q /h l/in x- V,9,,-,, 7, 7, 7,,, x- V,,,9-, 9,7 9,,9,, 7, 7,, x- V, -,9 (),7,,, 9,, 7 x- V,, -9,,,,,,,7, 9, DB PUMPS reserves the right to ake odifications without notice.
13 The perforance curves are based on kineatic viscosity values = /s and density equivalent to kg/. Tolerance of curves to ISO 99. CM Liquid teperature range: fro - C to + C Maxiu teperature operating: + C CM -7//BQE/ 9 7 M 9, 9, CM -7//BQE/, 77 M 9, 99,9 CM -//BQE/7, M 9,,9 CM -//BQE/ M 9, 9, CM -//BQE/ M 9,9, CM -//BQE/, M 9,9 79, CM -//BQE/ M 9,9, CM -//BQE/ M 9,9 CM -7//BQE/ x V,, MEC,,, CM -7//BQE/, x V,7, 7, MEC,7 7,, CM -//BQE/7, x V,9 7, MEC M,, CM -//BQE/ x V MEC M, CM -//BQE/ x V 7 MEC L 7,7 9, CM -//BQE/, x V, MEC L, 9, CM -//BQE/ x V MEC L 99,, CM -//BQE/ x V MEC L, 9, Star start is possible DIMENSIONS DB PUMPS reserves the right to ake odifications without notice. PCKING DIM. B B B C D D D S holes L L L M L\ L\B VOLTGE z r.p.. /in P MX P NOMINL P MOTOR SIZE I st. ax % WEIGT cos
14 The perforance curves are based on kineatic viscosity values = /s and density equivalent to kg/. Tolerance of curves to ISO 99. CM Liquid teperature range: fro - C to + C Maxiu teperature operating: + C CM -9//BQE/, M 9,7, CM -//BQE/7, M 9,7, CM -//BQE/ M 9,7 9, CM -9//BQE/ M 9,9, CM -//BQE/, M 9,9 7, CM -//BQE/ M 9,9,9 DIMENSIONS PCKING DIM. B B B C D D D S holes L L L M L\ L\B VOLTGE z r.p.. /in CM -9//BQE/, x V,7, 7, MEC,7 7,, CM -//BQE/7, x V 9 7, MEC M,, CM -//BQE/ x V MEC M, CM -9//BQE/ x V 7 MEC L 7,7 9, CM -//BQE/, x V, MEC L, 9, CM -//BQE/ x V MEC L 99,, P MX P NOMINL P MOTOR SIZE I st. ax % WEIGT cos Star start is possible DB PUMPS reserves the right to ake odifications without notice.
KVC / KVCX GENERAL DATA. motralec VERTICAL MULTISTAGE PUMPS
/ X VERTICL MULTISTGE PUMPS motralec rue Lavoisier. Z Lavoisier. ERBLY CEDEX Tel. :... / Fax. :... Demande de prix / e-mail : service-commercial@motralec.com www.motralec.com X GENERL DT pplications Vertical
KVC / KVCX - main advantages
/ X - ain advantages novative and odern design Easy and rapid aintenance Flexibility: suitable for various pup types igh perforance Coplete with entirely rust-proof coponents Robust construction Featuring
1-2-3 KVC PRESSURE BOOSTER SETS WITH VERTICAL AXIS MULTISTAGE CENTRIFUGAL PUMPS TECHNICAL DATA
E.BOX G 174 1-2-3 KVC BOOSTER SETS WIT 1-2 - 3 VERTICL XIS MULTISTGE CENTRIFUGL UMS TECNICL DT Operating range: fro 1 to 36 3 /h. uped liquid: clean, free of solids and abrasives, non viscous, non aggressive,
MATERIALS ORIENTATION OF THE SUCTION AND DELIVERY CONNECTORS: N. PARTS* MATERIALS CENTRIFUGAL ELECTRONIC PUMPS
ENTRIFUAL ELETRONI UMS KVE 3-6-1 VERTIAL AXIS MULTISTAE ENTRIFUAL UMS WIT ME/ INVERTER TENIAL ATA Operating range: fro 1,8 to 13,5 3 /h, with head up to 158 etres. Liquid teperature range: fro to 35 for
KE SINGLE-IMPELLER SINGLE-IMPELLER CENTRIFUGAL ELECTRIC PUMPS WITH MCE/P INVERTER
K SINL-IMLLR SINL-IMLLR NTRIFUL LTRI UMS WIT M/ INVRTR TNIL DT Operating range: fro 6 to 3 /h with head up to 6 etres. Liquid teperature range: fro - to + for K 36/ and K /, fro - to +8 for the other pups.
CENTRIFUGAL ELECTRONIC PUMPS TECHNICAL CATALOGUE
CENTRIFU EECTRONIC UMS TECNIC CTOUE CERTIFICTIONS CONTENTS CENTRIFU EECTRONIC UMS KE SINE-IMEER KVCE 3-5 - - E 3 E KE OUE-IMEER KVE 3 - - E E NKM-E / NK-E NKVE - 5 - - 3-5 - 5-95 E 9 E KNE E RUIC EFFICIENC
BC 35 DOUBLE-CHANNEL. Submersible pumps. PERFORMANCE RANGE Flow rate up to 1900 l/min (114 m3/h) Head up to 31 m
BC 5 Suersile pups DOUBLE-CHANNEL Sewage water Civil use Industrial use PERFORMANCE RANGE Flow rate up to 900 ( /h) Head up to APPLICATION LIMITS 0 axiu iersion depth (with a sufficiently long power cale)
Standardised EN 733 centrifugal pumps
F Standardised EN 733 centrifugal pumps PERFORMANCE RANGE Flow rate up to l/min (3 m³/h) Head up to 9 m APPLICATION LIMITS Manometric suction lift up to 7 m Liquid temperature between - C and +9 C Ambient
L P Linn-Pumpen GmbH. Submersible Vertical Electric pumps. SVI Series. with high efficiency PLM motors. SVI Series MARKET SECTORS INDUSTRIAL, CIVIL.
Submersible Vertical Electric pumps with high efficiency PLM motors MARKET SECTORS INDUSTRIAL, CIVIL. APPLICATIONS Pumping of coolants, lubrificants and condensate. Machine tools, welders, engine test
2CP. Centrifugal twin-impeller pumps
CP Centrifugal twin-impeller pumps Clean water Domestic use Civil use Industrial use PERFORMANCE RANGE Flow rate up to l/min (7 m³/h) Head up to m APPLICATION LIMITS Manometric suction lift up to 7 m Liquid
Standard Circulating Pumps
Product review Range: 1 1 3Q [ m³/h] Hz - North America 1 3 1 1 1.x1 1.x x x3 x 1 1 Q [ US gpm] >Single-head pumps: Seal-less circulator with flanged connection. Two speed, manually adjustable to match
Balancing valve PN 16 and PN 25 DN
STAF, STAF-SG Balancing valve PN and PN DN 0-00 Pressurisation & Water Quality Balancing & Control Thermostatic Control ENGINEERING ADVANTAGE A flanged, cast iron (STAF) and ductile iron (STAF-SG) balancing
Standard Circulating Pumps
Product review Range: 1 1 3Q [ m³/h] Hz - North America 1 3 1 1 1.x1 1.x x x3 x 1 1 Q [ US gpm] >Single-head pumps: Circulating pumps with flanged connection > Applications: Drinking-water circulation
CR, CRN high pressure
GRUNDFOS DATA BOOKLET CR, CRN high pressure Vertical multistage centrifugal pumps 5/6 Hz Contents Product Data Performance range 3 Product range 4 Applications 4 CRNE 1 and 3 HS 5 CRN 5, 1, 15, SF 6 x
STAF, STAF-SG, STAF-R, STAG
STAF, STAFSG, STAFR, STAG Balancing valves 0. Technical description Applications: STAF, STAFSG, STAG: Heating and cooling systems STAFR: Heating and cooling systems Tapwater systems Functions: Balancing
BARE SHAFT PUMPS AND MOTOR PUMPS
APPLICATIONS Air Conditioning Heating and ventilation Refrigeration Fire protection Plumbing Water Circulation Transfer and Irrigation Pressure Boosting Process Industries Water Treatment and Supply DESIGN
NM, NMD NM, NMD: Close Coupled Centrifugal Pumps with threaded ports
, D Contruction Cloecoupled, centriugl pup; electric otor ith extended ht directly connected to the pup. : ingleipeller D:ith to cktock ipeller (ith xil thrut lncing). Connection: threded port ISO / (S
EVOPLUS SMALL / EVOPLUS SMALL SAN WET ROTOR ELECTRONIC CIRCULATORS
ET ROTOR EECTRONIC CIRCUTORS in line with European irective Er 9//EC (forerly Eu) of EVOUS SM / EVOUS SM SN ET ROTOR EECTRONIC CIRCUTORS TECNIC T Operating range: fro a ³/h with head of up to etres. uped
SUBMERSIBLE VERTICAL ELECTRIC PUMPS SVI SERIES
SUBMERSIBLE VERTICAL ELECTRIC PUMPS SVI SERIES EDIZIONE 09-99 ISO 9001 (UNI - EN 29001) Lowara has obtained top level Quality System certification for the following production plants: Montecchio Maggiore
4" MULTISTAGE CENTRIFUGAL SUBMERSED PUMPS COMPLETE WITH MOTOR
NOCCHI SCM 4 PLUS Maximum rigidity and resistance to water hammer, Strong resistance to the abrasive action of sand, Excellent hydraulic efficiency SCM 4 PLUS submersible pumps consist of a multi-stage
TD End-Suction Pumps. Operating data Flow rates up to 300 l/sec Head up to 160 metres Temperature 20 0 C to C
TD End-Suction Pumps One of the broadest ranges of pumps available from any British manufacturer, with discharge sizes from mm to 0 mm. Widest choice of materials of construction and options to suit many
Stainless Steel Submersible Pumps DATA BOOKLET. ISO 9001 Company. 60 Hz. Pumping Solution
Stainless Steel Submersible Pumps DATA BOOKET ISO Company Pumping Solution Hz Photographs of a few Manufacturing Units Contents Stainless steel submersible bore well pumps Product data Introduction Operating
Data sheet: Wilo-Stratos 40/1-8
Data sheet: Wilo-Stratos 4/1-8 Pump curves 1 2 v 3 4 DN4 m/s,5 1, 1,5 2, 2,5 DN5 H/m Wilo-Stratos 4/1-8 p/kpa Wilo-Stratos 5/1-8 48 1 /min - 1 V 1~23 V - DN 4 / DN 5 8 8 P 1/W n= const 6 383 1 /min - 8
Data sheet: Wilo-Stratos 30/1-8
Data sheet: Wilo-Stratos 3/1-8 Pump curves 7 337 1 /min - 9 V 6 34 1 /min - 8 V 5 271 4 1 /min - 7 V 239 1 /min - 6 V 3 26 1 /min - 5 V 2 173 1 /min - 4 V 14 1 1 /min - 3 V 2 4 6 8,5 1, 1,5 2, 2,5 Q/l/s
B 201 A B C. dynamx variable flow-control valves, series DXMB_C. Dynamic Flow Networking. Description. Content
DXM2D032 dynamx variable flow-control valves, series DXM_ 2-port or 3-port flow control valves Pressure-independent variable flow-control Integrated flow & temperature measurement Power supply U v : 24Volt
Lenntech BMP GRUNDFOS DATA BOOKLET. High-pressure piston pumps 50/60 Hz
Lenntech GRUNDFOS DATA BOOKLET BMP High-pressure piston pumps 50/60 Hz Contents Product data Introduction Page 3 Features and benefits Page 3 Applications Page 3 Pumped liquids Page 3 key Page 4 Motor
NM, NMD 60 Hz NM, NMD. Close Coupled Centrifugal Pumps with threaded ports
, D z Cloe Coupled Centriugl up Contruction Cloecoupled, centriugl pup; electric otor ith extended h directly connected to the pup. : ingleipeller D: ith to cktock ipeller (ith xil thrut lncing). Connection:
Data sheet: Wilo-Stratos 50/1-9
Data sheet: Wilo-Stratos 5/1-9 Pump curves H/m 2 5 1 15 2 1 v 1 2 3 1 41 1 /min-1 V 8 3714 1 /min-9 V 3329 1 /min-8 V 6 4 57 1 /min-6 V 2 4 6 P 1/W n= const 4 8 V 2 H/m 2943 1 /min-7 V 2171 1 /min-5 V
Data sheet: Wilo-Stratos 50/1-10
Data sheet: Wilo-Stratos 5/1-1 Pump curves v,4,8 1,2 1,6 2, 2,4DN 4 m/s,4,8 1,2 DN 5 H/m p/kpa Wilo-Stratos 4/1-1 445 1 /min - 1 V Wilo-Stratos 5/1-1 1 1~23 V - DN 4, DN 5 8 P 1/W n= const 6 314 1 /min
2-PORT SEAT VALVES PN16 WITH FLANGED CONNECTIONS STAZ-16, STBZ-16, STCZ-52 DATASHEET
-PORT SEAT VALVES PN WITH FLANGED CONNECTIONS STAZ-, STBZ-, STCZ- DATASHEET In boiler, district heating and refrigeration plants, cooling towers, heating groups, in ventilation and air-handling units as
Easy Flow Indicator Magnetisch-Induktiver Durchflussmesser. Type 8024 For Insertion Fittings. Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI
Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI Advantages / Benefits Reduced costs of ownership up to 6% Economic integration in pipe systems without any additional piping Shows flow rate with a clear,
Close-coupled centrifugal pumps
CombiBloc Close-coupled centrifugal pumps CombiBloc CombiBloc is the premier solution for pumping clean thin liquids in a very cost-effective way. The pump is part of Johnson Pump s Combi-system, a modular
SITRANS F flowmeters SITRANS F US. Flowmeter SONO 3300/FUS060 4/177. Technical specifications. Overview
Overview The combination of sensor SONO 3300 sensor and FUS060 transmitter is ideal for applications within the general industry. Measurements are independent of liquid temperature, density, pressure and
Submersible Pumps. Pumping Solution. 50 Hz
Submersible Pumps Pumping Solution 0 Hz INTRODUCTION Submersible bore well pumps for (DN 0 mm), (DN 0 mm), (DN 0 mm), (DN 00mm), (DN 0 mm) and (DN 00 mm) wells. Sized for connection to the motor according
GRUNDFOS DATA BOOKLET. Dewatering pumps 50 Hz
GRUNDFOS DATA BOOKLET Dewatering pumps 50 Hz Table of contents 1. Introduction 3 Applications 3 Pumped liquids 3 Constructional features 3 2. Identification 5 Type key 5 3. Selection of pump Ordering a
3-PORT SEAT VALVES PN16 WITH EXTERNALLY THREADED CONNECTIONS STAZ-16, STBZ-16, STCZ-53 DATASHEET
-PORT SEAT VALVES PN WITH EXTERNALLY THREADED CONNECTIONS STAZ-, STBZ-, STCZ- DATASHEET In small or medium-sized heating, ventilating and air conditioning plants as a control or safety shutoff valve. For
CR, CRN. Vertical Multistage Centrifugal Pumps. 50 Hz TM
CR, CRN Vertical Multistage Centrifugal Pums 5 z TM1 151 198 Contents General Data CR, CRN Performance Range Page 3 Product Range Page Overview of Alications Page 5 CR, CR, CR 8 and CR 1 Page CR 3, CR
Screw-Type Flow Meter SVC
Screw-Type Flow Meter SVC Description Screw-type flow meters belong to the group of positive displacement flow meters. Two measuring spindles (pos. 2) with a screw-shaped profile engage with each other.
GENERAL CATALOGUE 50 Hz
GENERAL CATALOGUE 50 z 41.2017 CERTIFICATES FOR TE INSTALLER SIMPLE INSTALLATION MAXIMUM PUMP AND SYSTEM PROTECTION ALL INTEGRATED TE MOST ADVANCED RANGE OF INTEGRATED BOOSTER PUMP SYSTEMS AVAILABLE FOR
M3P..G/A, M3P..F/A Modulating control valves (PN16) for chilled and hot water systems
MP..G/A, MP..F/A Modulating control valves (PN) for chilled and hot water systems Three-way or straight-through valves with magnetic actuators for modulating control of chilled and hot water systems. Short
Float Flow Meter. Flow measurement for translucent liquids and gases DN10 to DN65 mm. Technical data Orifice DN 10 to 65
Float Flow Meter Flow measurement for translucent liquids and gases DN10 to DN65 mm If a medium sufficient flow rate flows from bottom to top through a vertically inserted measuring tube, then the floated
Screw-Type Flow Meter SVC
Screw-Type Flow Meter SVC Description Screw-type flow meters belong to the group of positive displacement flow meters. Two measuring spindles (pos. 2) with a screw-shaped profile engage with each other.
ABR Elettropompe autoadescanti / Self-priming electric pumps
ABR- 24V Corrente continua / Direct current ABR-M/T Corrente alternata / Alternating current DESCRIZIONE E APPLICAZIONI Elettropope autoadescanti in bronzo a giranti stellari ultistadio largaente utilizzate
NDP-50 Series Specifications
NDP-50 Series Specifications Port Dimensions Intake & discharge connection: Polypropylene (PPG) 2 50mm DIN DN80 PN10 Kynar (PVDF) 2 50mm DIN DN80 PN10 Aluminum (ADC-12) 2 50mm DIN DN80 PN10 (with tapped
JVMG* *NSF 61/Annex G Certification and Compliance with State Codes does not apply to JVMG Models
JVM, JVML SERIES Stainless Steel Construction Closed multi-stage impeller Flow: 4 to 38 GPM Head: to 82 ft. Range of HP: to HP Applications: Commercial booster system, Boiler feed, Jockey, Water Purification,
NEOSTAR AXIAL FAN CONDENSER COMMERCIAL AND INDUSTRIAL RANGE HFC. 18 > 1240 kw. NEOSTAR POWER The choice of performance and low space requirement.
AXIAL FAN CONDENSER COMMERCIAL AND INDUSTRIAL RANGE Hard Discount - Supermarkets - Hypermarkets Refrigerated storage and transit stocking - Dispatch centres Food processing - Canteen kitchens HFC 18 >
Lenntech GRUNDFOS DATA BOOKLET. CME 10. Horizontal, multistage centrifugal pumps 50/60 Hz
Lenntech info@lenntech.com www.lenntech.com GRUNDFOS DATA BOOKLET CME 1 Horizontal, multistage centrifugal pumps 5/6 Hz General description CME Stainless-steel version Fig. 2 Grundfos CME pumps Cast-iron
UPGRADE PROGRAM. V250 Series Pumps vs V301 Series Pumps. Technical Memo
UPGRADE PROGRAM V250 Series Pumps vs V301 Series Pumps Technical Memo INDEX Outline drawings ISO100 3 Outline Drawing CFF6 5 Technical Specification 7 Notes 8 Accessories 8 Controller comparison 9 Outline
FEATURES APPLICATIONS OPERATING DATA MATERIALS OF CONSTRUCTION. Flood control
APPLICATIONS FEATURES Flood control Irrigation Land drainage Pollution control Industry Water refineries Water parks Design OPERATING DATA Capacity:...up to.000 m/h Head:...up to m Max. water temperature:...0
CR, CRI, CRN, CRE, CRIE, CRNE
GRUNDFOS PRODUCT GUIDE CR, CRI, CRN, CRE, CRIE, CRNE Vertical multistage centrifugal pumps 6 z Contents Mission Product data Introduction 4 Product range 6 Applications 8 Pump 9 Motor 9 Terminal box positions
shop online:
Process systems Liquid ring vacuum pumps Single stage pumps 8 Alpha series single stage liquid ring vacuum pumps 9 AL series single stage liquid ring vacuum pumps 97 Two stage pumps 00 SHR series liquid
Customised Solutions. grundfos industry
Customised Solutions grundfos industry NBG/NKG PUMPS Mix and match to create the ideal for the job at hand 22 2 Motors Grundfos Blueflux technology represents the best from Grundfos within energy efficient
60 Ghz - Radar filling level sensor RFM 2000 C4 / R / MD
60 Ghz - Radar filling level sensor RFM 2000 C4 / R / MD Features measuring range RFM 2000 up to 20 meters low angle of radiation for distance, volume and filling level measurement for containers, open
JUMO PINOS L01. Calorimetric flow sensor. Brief description. Special features. Customer benefits. Data Sheet
sales@jumo.co.uk info.us@jumo.net Page 1/9 JUMO PINOS L01 Calorimetric flow sensor Brief description The JUMO PINOS L01 flow sensor serves the measuring and monitoring of flow velocities of water and aqueous
A Guide To Using. > WebCAPS. Grundfos International Version
A Guide To Using > WebCAPS Grundfos International Version Introduction... 4 General... 4 Who should use this program?... 4 Disclaimer... 5 What's new... 6 New Products... 6 What s new in WebCAPS 2010.01?...
CR, CRN high pressure
GRUNDFOS PRODUCT GUIDE CR, CRN high pressure Vertical multistage centrifugal pumps 6 z Contents Mission 3 Product overview Performance range Product range 5 Applications 6 CRNE 1 and 3 S 7 CRN 5, 1, 15,
DIMENSION/WEIGHT kpa. 0 to 20 m / 0 to 60 ft 0 to 2 bar / 0 to 29 psi. 0 to 50 m / 0 to 160 ft 0 to 5 bar / 0 to 72.5 psi
V161102 Liquid Level Sensor Sensor for measuring the level of liquid in a well or tank USE / PURPOSE The range of liquid level sensors use pressure to measure the liquid level in a well or tank. The sensors
HANKIA. DSV type. Single stage,vertical Axially split case double suction pump
DSV type Single stage,vertical Axially split case double suction pump High efficiency and low pulsation Wind performance range with up to 280m head Stable service and low maintenance Heavy duty design
NIVOSWITCH VIBRATING FORK LEVEL SWITCHES
For liquids and solids NIVOSWITCH VIBRATING FORK LEVEL SWITCHES OUR PROFESSION IS YOUR LEVEL LEVEL SWITCHES O U R P R O F E S S I O N I S NIVOSWITCH VIBRATING FORK LEVEL SWITCHES MAIN FEATURES and mini
AB13F DOUBLE FLANGED BUTTERFLY VALVES DN50 - DN2000 FEATURES TECHNICAL DATA OPTIONS ACCORDING TO
Quality BF LEVER OPERTED GERBOX OPERTED FETURES Designed and manufactured to S79. Vulcanized liner resists deformation. Rated to 00kpa from 0mm up to 00mm and 000kpa from 700mm up to 00mm. Stainless steel
HM, HMC, HMN. Horizontal Multistage Centrifugal Pump, 60Hz
HM, HMC, HMN Horizontal Multistage Centrifugal Pump, 60Hz Approvals CERTIFICATE IQNet and SQS hereby certify that the organization Swiss Pump Company AG CH-3645 Thun-Gwatt Certified area Whole company
Operating Instruction
Level and Pressure Operating Instruction VEGASWING 71 A Contents Contents Safety information... 2 1 Product description 1.1 Function and configuration... 3 1.2 Functional principle... 3 1.3 Technical data...
SUBMERSIBLE PUMPS SEWAGE RANGE
OPERATING LIMITS Flow rates up to: 00 m /h Head up to: 0 m CL Liquid temperature range: + to 0 C* Density of liquid:.0 max. ph of liquid: - Max. immersion depth: 0 m Max. particle size: Ø 0-0 mm ND discharge
selection of special materials is available to handle almost any fluid.
For Pressure Transmitters and Bourdon Tube Pressure Gauges Types 839 X Chemical Seals for Various Applications Advantages / Benefits Separation of medium and measuring device in difficult applications
Radiator Valves. Building Technologies HVAC Products. NF norm, for 2-pipe heating systems
6 EN - Straight valves VDN Angle valves VEN Reverse angle valves VUN Radiator Valves NF norm, for -pipe heating systems VDN VEN VUN Valve bodies made of brass, mat nickel-plated DN, DN and DN (VDN, VEN
ERP 2013 Regulation (EU) Compliant with. No. 327/2011. Heating / Air Conditioning Atlas ECM Unit Heaters. Cert. n 0545/5
Copliant with ERP 201 Regulation (EU) No. 2/20 Cert. n 0/ Heating / Air Conditioning Unit Heaters CONTENTS Introduction Page Construction features Page Identification code Page Diensions, Weight, Water
Series description: Wilo-MultiCargo HMC
Series description: -MultiCargo HMC H/m HMC 5 HMC -MultiCargo HMC 3../.. 1 3 5 7 /m³/h Design Self-priming water-supply unit Application Water supply Sprinkling Irrigation and spraying Pumping water from
RSK. Wafer Type Check Valve. Construction. Features. Advantages
Wafer Type Check Valve Construction The GEMÜ wafer type check valve is available in plastic or metal and the body, disc and seal can be chosen from various materials. The valve is clamped between two flanges
1. General introduction 2. MOUNTING ARRANGEMENT
1. General introduction OME series three phase asynchronous motor is high efficiency electric motor with cast iron housing. Its indicators are in line with the European standard. The high efficiency motor
IC Series Constant Pressure Inverter Control System
I Series onstant Pressure Inverter ontrol System racsystems PUMP ISO 0 ertified Explanation pplications: Suitable liquids: pplication onditions: Product Features: ode: Optional order: Installation Precautions
4W 50Hz 2900 RPM Noryl Pump
50Hz Noryl Pump DCODE Identification system for Pump x x x xxx x x xx Example :- No of Stage Design No Frequency 50= A /60=B Meter 3 / Hour Mix Flow / Radial Flow Material A=AISI316, B=AISI304 C=Bronze,
Pressure control valves type B
Pressure control valves type B Burner Components Catalogue 1 Contents Application... page 2 Design... page 2 Exploded view... page 2 Function... page 2 Technical data... page 3 p-q table... page 3 Dimension...
SUCTION FILTERS. PRESSURE (ISO :2002) Collapse, differential for the fi lter element (ISO 2941): 1 MPa (10 bar)
COMPONENTS SUCTION ILTERS SD MATERIALS Cover & housing: Anodized aluminium alloy or 6&6 only: Cover: anodized aluminium alloy Housing: steel ypass valve: Polyammide Seals: NR Nitrile (KM on request fl
HIGH EFFICIENCY UP TO 19 SEER VARIABLE SPEED HEAT PUMP WITH OBSERVER
HVH8 Product Specifications HIGH EFFICIENCY UP TO 19 SEER VARIABLE SPEED HEAT PUP WITH OBSERVER COUNICATING CONTROL SYSTE 2 THRU 5 TONS SPLIT SYSTE 208 230 Volt, 1 phase, 60 Hz REFRIGERATION CIRCUIT Variable
ZMD ZMDV. AXIALLY SPLIT, ONE-STAGE, BETWEEN-BEARINGS PUMPS 50/60 Hz. High reliability and efficiency. Wide range of material options
AXIALLY SPLIT, ONE-STAGE, BETWEEN-BEARINGS PUMPS 0/ Hz ZMD ZMDV High reliability and efficiency Wide range of material options Excellent suction capability due to low NPSH Simple installation and maintenance
FOR LIQUIDS AND SOLIDS
FOR LIQUIDS AND SOLIDS LEVEL SWITCHES VIBRATING FORK LEVEL SWITCHES O U R P R O F E S S I O N NIVOSWITCH VIBRATING FORK LEVEL SWITCHES MAIN FEATURES and mini compact type Rod extension up to 3 meters (10
FLS F3.00 PADDLEWHEEL FLOW SENSOR APPLICATIONS MAIN FEATURES
FLS F3.00 PADDLEWHEEL FLOW SENSOR APPLICATIONS The simple and reliable paddlewheel flow sensor type F3.00 is designed for use with every kind of solid-free liquids. The sensor can measure flow from 0.15
8 Submersible Motors Standard
Applications These motors are built for dependable operation in vertical 8 diameter or larger water wells. Basic Features Double Flanged NEMA mounting design Stainless steel splined shaft StatorShield
UPGRADE PROGRAM. V70 Series Pumps vs V81T Series Pumps
VARIAN vacuum technologies UPGRADE PROGRAM V70 Series Pumps vs V81T Series Pumps Technical Memo Technical Memo - 1 - V70 series vs V81-T INDEX Outline drawings ISO63 3 Outline drawings CF2-¾ 4 Outline
CHAPTER 1. Unit CHA/IK/WP CHA/CLK CHA/ML/ST CHA/ML/ST CHA/ML/ST 182-P 302-P 50-51
CHAPTER AIRCOOLED LIQUID CHILLERS AND HEAT PUMPS FOR RESIDENTIAL & LIGHT COMMERCIAL APPLICATION Unit Page CHA/IK/WP - CHA/CLK 8 - CHA/ML/ST - CHA/ML/ST 9 8-9 CHA/ML/ST 8-P 0-P 0 - FROM, KW TO KW. CHA/IK/WP
For latest prices and delivery to your door visit MyTub Ltd GRUNDFOS UP PUMPS THE PERFECT FIT...
GRUNFOS UP PUMPS TH PRFT FIT... Grundfos has the piece of the puzzle you need... When replacing a circulator pump, there is more to think about than simple mechanical dimensions. Like a jigsaw puzzle,
Mechanically Activated Device for Dry Run Protection in Applications with LORENTZ Solar Pump Systems
Well Probe Mechanically Activated Device for Dry Run Protection in Applications with LORENTZ Solar Pump Systems The switch can be used to detect the water level within a well. When the water level in the
Liquistation CSF22. Technical Information
Technical Information Liquistation CSF22 Automatic stationary sampler for liquid media Integrated multiparameter controller with Modbus RS485 communication Application Liquistation CSF22 is a stationary
glide glider kw R134a air cooled liquid chillers AND free cooling chillers FREE COOLING SHELL A C CLASS E C Energy Class RCGROUP SpA
99 glide air cooled liquid chillers ND free cooling chillers glider 178 1328 Energy Class More efficient + B C D E F G Less efficient R134a CLSS SHELL C E C FREE COOLING 100 air cooled liquid chiller and
Pressure reducing valve. Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI
Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI Pressure reducing valve ARI-PREDU - ANSI Pressure regulating valve, straight through with diaphragm actuator DMA Actuator with rolling
ASTRO CIRCULATORS. IRON BODY CONSTRUCTION Model No. Part No. Connection List Price Wt.ea.lbs. ASTRO
ASTRO CIRCULATORS ASTRO 3 Speed: IRON BODY CONSTRUCTION Model No. Part No. Connection List Price Wt.ea.lbs. ASTRO-30-3 110123-305 Replaced by 110223-305 (Astro 2) ASTRO-50-3 110123-307 Replaced by 110223-307
Dewatering pumps for raw water pumping GRUNDFOS DW RANGE. Dewatering pump kw
Dewatering pumps for raw water pumping GRUNDFOS DW RANGE Dewatering pump 0.7-20 kw efficient state-of-art dewatering pumps Unique user benefits The Grundfos DW pumps form part of a complete range of wastewater
ASTRO 2 CIRCULATORS. ASTRO 2 3-Speed Circulators (except Astro 286):
DATE: January 30, 015 DATE: January 5, 014 ASTRO 3-Speed Circulators (except Astro 86): ASTRO CIRCULATORS IRON BODY CONSTRUCTION (Includes Check Valve) Model No. Part No. Connection List Price Wt.ea.lbs.
FALCON High Flow. Circular ceiling air diffuser for supply air QUICK FACTS
Circular ceiling air diffuser for supply air QUICK FACTS Ceiling air diffuser for supply air in rooms with high ceiling Manual operated change of spread direction as standard Motor operated change of spread
AIR COOLED CHILLERS WITH SCREW COMPRESSORS AND AXIAL FANS
RAH 913 K AIR R-407C R-134a Series RAH... from 307 to 1879 kw - from 1 to 4 circuits The air cooled chillers of RAH series are extremely compact units so to reduce the installation spaces and weights.
Technical Specification _5.0. Concertor N/EA/DP
Technical Specification 886_. Concertor N/EA/DP Table of Contents Table of Contents System Description.... System overview..... Concertor N..... Concertor EA..... Concertor DP... Product Description...6.
Electromechanical pressure switches
Presentation Electromechanical pressure switches For control circuits, types ACW and ADW Presentation Pressure switches type ACW and ADW are switches for control circuits, with an adjustable differential.
SERIES 1300 Quality Design Features Assure Long, Trouble-Free Service
SERIES Quality Design Features Assure Long, Trouble-Free Service End Suction WIDE RANGE OF APPLICATIONS: Industrial Process Pollution Control General Pumping Spray Systems Deionized Water Waste Water Clear
Compact pressure switch for multiple actuators
Comct pressure switch for multiple actuators GW A GW A/.0 Printed in Germany Edition 0.0 Nr. 90 Technical description The GW A pressure switch is a comct pressure switch as r EN 8 for DUNGS multiple actuators.
NOVAZONE BALL MOTOR-DRIVEN BALL VALVE ADVANTAGES. Control of volume flows for different fluids in HVAC systems SYSTEM/BASIC DIAGRAM
OVAZOE BA OTOR-DRIVE BA VAVE ADVATAGES ovazone Ball up to " One potential-free auxiliary switch Short actuating times ever for manual operation ow maintenance -way with inversion of direction of operation
I ntroduction. RA Fast Running Electric Actuator. Features and Benefits
European Electronic Controls Catalogue Section E Product Bulletin RA-3100-8026 Issue Date 0303 RA-3100-8026 Fast Running Electric Actuator I ntroduction The RA-3100 series synchronous motor-driven reversible
Level. Guided Microwave. Overview 26 VEGAFLEX series Accessories 40
evel Guided Microwave Overview 26 VEGAFEX series 60 28 Accessories 40 25 Overview evel Application Measuring range Process fitting VEGAFEX 61 VEGAFEX 62 VEGAFEX 63 iquids, light-weight bulk solids Cable:
Electromotive actuators for combi valves
s 4 833 ACVATIX Electromotive actuators for combi valves For combi valves VPF43.. and VPF53.. SQV..P.. SQV91.. Operating voltage AC/DC 24 V, Positioning signal 3-position, DC 0-10 V, DC 4-20 ma Position
Pressure reducing valve. Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI
Pressure reducing valve in straightway form NPS 1-6 Pressure reducing valve Pressure regulating valve, straight through with diaphragm actuator DMA Actuator with rolling diaphragm Cast steel Fig. 701 Page
FB-Hygia.book Page 1 Monday, June 21, :58 PM GRUNDFOS PRODUCT GUIDE. Sanitary pumps. Centrifugal pumps 60 Hz
FB-ygia.book Page Monday, June, : PM GRUNDFOS PRODUCT GUIDE Sanitary pumps FB Centrifugal pumps z FB-ygia.book Page Monday, June, : PM Contents Mission Mission Introduction Grundfos sanitary pumps ygienic