PL Nickel-Plated Brass Spigot Fitting Range
|
|
- Verity Bruce
- 5 years ago
- Views:
Transcription
1 P Nickel-Plated Brass Spigot itting Range P nickel-plated Brass Spigot ittings Stud ittings BP 3BP 4BP BSPP 8BP Metric BP 3BP 4BP BSPP 8BP Metric RBP R3BP SBP S3BP Banjo itting Tube-to-Tube ittings omplementary itting OR4BP BSPP BP onnector BP onnector WBP Bulkhead onnector BPM Nut P nickel-plated Brass Spigot ittings Brass ompression ittings 5-41
2 P Nickel-Plated Brass Spigot ittings This range of Parker egris has a sealing system which guarantees excellent sealing and full flow. P fittings for flexible tubing are fully re-usable. They provide excellent compatibility with a wide variety of fluids. Product Advantages Rapid Assembly Performance Nut design allows hand tightening with soft tubing (PU, Pe etc.) Quick to assemble and disassemble ompatible with all fl exible tubes of hardness up to 90 shore A (polyurethane, polyamide, polyethylene, fl uoropolymers, etc.) Mechanical stop on the body to prevent overtightening Special spigot design ensures full flow and excellent tensile performance Reliable direct sealing system without the use of a seal or olive ow and medium pressure Nickel-plated for increased corrosion resistance ood Process Painting Pneumatic Systems hemical Welding aboratories Railway Applications Technical haracteristics ompatible luids ompressed air Other fluids: contact us omponent Materials Body: Working Pressure Vacuum to 40 bar Working Temperature -40 to +100 Tensile Performance (polyamide tubing) Ø 2.7/4 4/6 6/8 7.5/10 8/10 10/12 11/14 dan Reliable performance is dependent upon the type of fluid conveyed, component materials and tubing being used. Guaranteed for use with a vacuum of 755 mm g (99% vacuum). Installation Silicone-free Nut: utting the Tube Preparing the onnection onnecting the Tube inal Assembly ut the polymer tube square. Slide the nut onto the tube. Push the tube home into the body of the fi tting. Tighten the nut by hand (in the case of soft tubing) or using a spanner (for semirigid tubing) until it comes into contact with the end stop. 5-42
3 Stud ittings BP Stud itting, Male Thread 1 1 kg 2.7x4 1/8 BP2.7/4-1/ x6 1/8 BP4/6-1/ x6 1/4 BP4/6-1/4aV x8 1/8 BP6/8-1/ x8 1/4 BP6/8-1/ x10 1/4 BP8/10-1/ x10 3/8 BP8/10-3/ x12 3/8 BP10/12-3/ BP 4BP Stud itting, Male Thread Stud itting, Male BSPP Thread 1 1 kg 2.7x4 R1/8 3BP2.7/4-1/ x6 R1/8 3BP4/6-1/ x6 R1/4 3BP4/6-1/ x8 R1/8 3BP6/8-1/ x8 R1/4 3BP6/8-1/ x8 R3/8 3BP6/8-3/ x10 R1/4 3BP7.5/10-1/ x10 R3/8 3BP7.5/10-3/ x10 R1/4 3BP8/10-1/ x10 R3/8 3BP8/10-3/ x12 R3/8 3BP10/12-3/ x14 R3/8 3BP11/14-3/ kg 4x6 G1/8 4BP4/6-1/ x8 G1/4 4BP6/8-1/ Brass ompression ittings These fi ttings are supplied with a copper seal. 1 8BP Stud itting, Male Metric Straight Thread 1 kg 6x8 M10x1 8BP6/8M x8 M12x1.25 8BP6/8M These fi ttings are supplied with a copper seal. 1 itting Dimensions D: Tube O.D. (mm) : Metric Thread D1: Bore Diameter (mm) : ex (mm) : Tube Insertion ength (mm) 4x2.7 M6x x4 M9x x6 M11x x7.5 M13x x8 M13x x10 M15x x11 M18x P nickel-plated Brass Spigot ittings 5-43
4 Stud ittings BP Stud lbow, Male Thread kg 2.7x4 1/8 BP2.7/4-1/ x6 1/8 BP4/6-1/ x6 1/4 BP4/6-1/ x8 1/8 BP6/8-1/ x8 1/4 BP6/8-1/ x10 1/4 BP8/10-1/ x10 3/8 BP8/10-3/ x12 3/8 BP10/12-3/ BP Stud lbow, Male Thread kg 2.7x4 R1/8 3BP2.7/4-1/ x6 R1/8 3BP4/6-1/ x6 R1/4 3BP4/6-1/ x8 R1/8 3BP6/8-1/ x8 R1/4 3BP6/8-1/ x8 R3/8 3BP6/8-3/ x10 R1/4 3BP7.5/10-1/ x10 R3/8 3BP7.5/10-3/ x10 R1/4 3BP8/10-1/ x10 R3/8 3BP8/10-3/ x12 R3/8 3BP10/12-3/ x14 R3/8 3BP11/14-3/ BP Stud lbow, Male BSPP Thread, nbr 1 kg 6x8 G1/4 4BP6/8-1/ These fi ttings are supplied with nitrile seals. 1 8BP Stud lbow, Male Metric Straight Thread, nbr 1 kg 6x8 M10x1 8BP6/8M , x8 M12x1 8BP6/8M These fi ttings are supplied with nitrile seals
5 Stud ittings RBP Stud Run Tee, Male Thread kg 4x6 1/8 RBP4/6-1/ x6 1/4 RBP4/6-1/ x8 1/4 RBP6/8-1/ R3BP Stud Run Tee, Male Thread kg 4x6 R1/8 R3BP4/6-1/ x6 R1/4 R3BP4/6-1/ x8 R1/8 R3BP6/8-1/ x8 R1/4 R3BP6/8-1/ SBP Stud Branch Tee, Male Thread 1 1 kg 4x6 1/8 SBP4/6-1/ x6 1/4 SBP4/6-1/ x8 1/4 SBP6/8-1/ Brass ompression ittings S3BP Branch Tee, Male Thread 1 1 kg 4x6 R1/8 S3BP4/6-1/ x6 R1/4 S3BP4/6-1/ x8 R1/8 S3BP6/8-1/ x8 R1/4 S3BP6/8-1/ OR4BP Single Banjo, Male BSPP Thread kg 4x6 G1/8 OR4BP4/6-1/ x6 G1/4 OR4BP4/6-1/ x8 G1/8 OR4BP6/8-1/ x8 G1/4 OR4BP6/8-1/ These parts are supplied with peripheral seals. The banjo bolt is made of steel. P nickel-plated Brass Spigot ittings 5-45
6 P Tube-to-Tube and omplementary ittings BP qual Tube-to-Tube onnector 1 kg 2.7x4 BP2.7/ x6 BP4/ x8 BP6/ x10 BP8/ x12 BP10/ x14 BP11/ BP qual Tee 1 kg 2.7x4 BP2.7/ x6 BP4/ x8 BP6/ x10 BP7.5/ x10 BP8/ x12 BP10/ x14 BP11/ WBP qual Bulkhead onnector K ØT K max 1 T min 4x6 WBP4/ M9x x8 WBP6/ M11x x10 WBP8/ M13x x12 WBP10/ M15x x14 WBP11/ M18x kg BPM Nut kg 2.7x4 M6x0.75 BP4M x6 M9x0.75 BP6M x8 M11x0.75 BP8M x10 M13x1 BP10M x10 M13x1 BP10M x12 M15x1.25 BP12M x14 M18x1.5 BP14M
7 P Nickel-Plated Brass Spigot ittings Brass ompression ittings 5-47
LF 3600 Nickel-Plated Brass Instant Fittings
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding 00 Nickel-Plated Brass Instant ittings One fitting for all industrial
More information10 series (Pneufit) Push-in fittings Ø mm tube size, BSP threads
0 series (Pneufit) Push-in fittings Ø 4... 4 mm tube size, SP threads Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All SP taper threads pre-coated
More informationbrass compression fittings
compression fittings principle of universal compression fittings The range is called universal as it offers the maximum number of direct fitting alternatives with the minimum number of components. Tube
More informationpneumatic push-in fittings system LF 3000
pneumatic push-in fittings system LF 3000 Parker Legris connectic products are available from MARYLAND METRIS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
More information10 series (Pneufit) Push-in fittings Ø mm O/D tube, BSP threads
0 series (Pneufit) Push-in fittings Ø 4... 4 mm O/D tube, SP threads Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All SP taper threads pre-coated
More informationBSP & HOSE Fittings M5, 1/8... 1
SP & HOS Fittings M5, 1/8... 1 Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All taper threads pre-coated with non-ptf based sealant Straight Adaptors
More informationPNEUFIT 10 series Push-in fittings
PNUFIT 0 series > > Port size: Ø 4... 4 mm O/D tube, SP threads > > Very compact units > > asy tube insertion for rapid assembly of pneumatic circuits > > Straight adaptors feature internal hexagon for
More informationCompression fittings Metric and inch
Fittings Compression fittings Metric and inch Ø 4 to 28 mm tube Ø 3 /16" to È" tube Wide range of types and sizes. Rugged and durable. Suitable for use under extreme conditions of temperature and pressure.
More information15 and 16 Series BSP and hose fittings
SP and hose fittings > > Port size: M5, 1/8... 1 > > xtensive range of shapes and sizes including manifolds > > High temperature and pressure copper sealing washers supplied with ISO threads Technical
More informationLF3800 stainless steel push-to-connect fittings
3800 push-to-connect fittings principle of system 3800 push-to-connect fitting system The 3800 range provides the advantages of push-to-connect fittings instant connection and disconnection for a wider
More informationANACONDA MULTIFLEX CONDUIT TYPE UI
ANACONDA MULTIFLEX CONDUIT TYPE UI Very robust, extremely flexible and corrosion resistant Multifl ex type UI is the stainless steel version of type UIG. Extremely fl exible and robust, this fully interlocked,
More informationpush-to-connect fittings system LF3000
legris products are available from: MARYAD MTRIS push-to-connect fittgs system 3000 Order from: Maryland Metrics email: techfo@mdmetric.com ph. (800)638-1830 fx. (800)87-939 prciple of system 3000 legris
More informationCompression Fittings 34 Series Inch
4 Series /6" O/ l Wide range of types and sizes l Rugged and durable l Suitable for use under extreme conditions of pressure and temperature l Ideal for most general industrial applications Technical ata
More informationUNITED STATES MEXICO CANADA
www.legris.com Online catalog with technical information and training module to help you implement the right solution. Find technical data on your fitting and download a CAD in many different formats.
More informationQuality, Precision and Unbeatable Value!
PUSH IN FITTINGS 31 RX Push In Fittings 1 High quality Push In Fittings in composite materials or all nickel plated brass. 100% leak tested during production, these fittings are suitable for both pneumatic
More informationLF 3900 / LF New range of stainless steel instant. aerospace climate control electromechanical
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding 00 / 0 New range of stainless steel instant fittings Parker egris connectic
More information1COMPRESSION FITTINGS
SECTION 1COMPRESSION FITTINGS TECHNICAL INFORMATION Wade Couplings consistently produce cost effective, reliable leak-tight joints. All Wade couplings are specially designed for use with Wade nuts and
More informationCode Type I.D. (mm) O.D. (mm) Operating Pressure (PSI) Min. Burst Pressure (PSI)
411 Series Braided Teflon Hose Order by Phone +44 (0) 121 525 5800 Type 411 Teflon Smooth Bore Hose The exceptional resistance of Teflon to high temperatures, permeability, chemical attack, water absorption
More informationpneumatic function valves
pneumatic function valves Fluidline omponents, Inc lawson, MI 48017 www.legris.com flow control regulators meter out version meter in version bi-directional version fine adjustment screw locknut fine adjustment
More informationStainless One-touch Fittings. Applicable Tubing. Tube material Tube O.D. Specifications. Thread Nut Sealant (Thread portion) Component Materials
Stainless One-touch Fittings Series KG Guide Collet Chuck Accepts nylon, soft nylon and polyurethane tubes. as large retaining force. Chuck certainly bites tube and collet increases retaining force. Release
More informationPneufit C composite and Pneufit M fittings Inch Ø 1/8... 1/2 O/D tube
Pneufit composite and Pneufit M fittings Ø 1/8... 1/2 O/ tube Norgren Pneufit fittings are ready to use, offering fast assembly with no need for tools providing optimum flow. Pneufit offers a broad range
More informationM10 / M12 M12 / M16 M16 / M20 M20 M20 M25 M32 M40 M50 / M / 13,5 13,
Multitite F grey: Light and flexible. Type F is, among others, being used in the buildingindustry, connection of control panels and protection against rodents. F is applied for quick and easy mounting
More informationPNEUMATIC TUBING FITTING
2011 PNEUMATIC TUBING FITTING CATALOGUE FLYTECH ENGINEERING SDN BHD GENERAL INFORMATION Flytech had cooperated with ISAIAH GROUP from Taiwan to promote the Pneumatic Fitting & Tubing. The company takes
More informationComposite Push-In Fittings - NPTF/INCH
composite FITTINGS Composite Push-In Fittings - F/INCH Tube diameter: Ø /8", 5/32", /4", 5/6", 3/8", /2" Connections /8, /4, 3/8, /2 F These new models have been released in technopolymer, maintaining
More informationCompression Fittings
ompression Fittings TITN ompression Fittings are designed to comply with established industry standards. This economical fitting is available in a wide range of off-the-shelf sizes and styles. They are
More informationInsert Fittings. KF Series
Insert Fittings Series A reliable seal Holds the tube tightly Insert An insert mechanism can provide reliable retaining force on tubes made of a wide variety of materials ube grip (resin sleeve) ube is
More informationPNEUMATICS FITTINGS See easy to make a connection on page Technical Specification shown on pages
PNEUMATICS FITTINGS Super Speedfit Push-in fittings have been specially designed for miniature pneumatics applications. They provide a fast and secure way of connecting tubes and offer considerable advantages
More informationPRK. Plastic pipe couplings Suitable for PEL, PEH and PEM pipes
PRK Plastic pipe couplings Suitable for PEL, PEH and PEM pipes IMI TA / Couplings / PRK PRK This plastic pipe coupling is suitable for PEL, PEH and PEM pipes and can be used both above and underground.
More informationFlow control valves Series SCU, MCU, SVU, MVU, SCO, MCO
S E R I E S SCU MCU SVU MVU SCO Flow control valves Series SCU, MCU, SVU, MVU, SCO, Unidirectional and bidirectional banjo flow controllers Ports M, G1/8, G1/4, G3/8, G1/2 A U T O M A T I C These unidirectional
More informationInch-size One-touch Fittings. Applicable Tubing: Inch Size Connection Thread: UNF, NPT. How to Order. Applicable tubing O.D.
Inch- One-touch Fittings Series KQ Tubing: Inch Size Thread:, KQ 0 ow to Order S Symbol Nil ccessory Symbol KQN KQC KQ (KQ) roduct s color Body White Black One-touch s Release button Orange Red Name Nipple
More informationRev/02/ Flared T (SAE J514) ube Fittings
Rev/02/2013 37 lared Tube ittings (SA J514) Introduction PANAM has been in the field of manufacturing precision Tube ittings and Instrumentation valves since the last Two decades. With a team of dedicated
More informationCompressed Air Systems Pneumatic Fittings LLDPE Tube
John Guest Limited Horton Road, West Drayton, Middlesex UB7 8JL, England Tel: 01895 449233 Fax: 01895 420321. www.johnguest.com and are registered trademarks of John Guest International Limited Copyright
More informationIntru-Lok Flareless Bite Type Fittings
Intru-ok Flareless Bite Type Fittings The Fitting Authority 400 atalog Intru-ok Flareless Bite Type Fittings uts, Ferrules, Inserts BIP Knurled ut BI ut BTI ut and Ferrule TI Ferrule TIP Expander / Insert
More informationPoly-Tite Fittings. Order By part number and name.
oly-tite ittings Advantages A compact brass compression fitting designed to speed any installation. Body, nut and sleeve are furnished pre-assembled, ready for installation. An exclusive acetal copolymer
More informationPipe Fittings. ADVANTAGES Very easy to assemble. No special tools or extra parts are necessary. May be assembled/ disassembled numerous times.
Fittings TTON Fittings are manufactured with female R Series and male BST threads in accordance with AS1772. These robust fittings are available in a comprehensive range of sizes ranging from 1/8" to 1".
More informationJOHN GUEST SPEEDFIT FITTINGS
G6300 JOHN GUEST SPEEDFIT FITTINGS Grey acetyl copolymer construction with nitrile o-rings. FDA approved materials on all wetted surfaces. Meet NSF International Standards 51 and 61. Part Cross Pipe PRICE
More informationStandard Series Standard
Standard Series Standard Technical Data Coupler connector, cable connector and coupler connector rectangular housing Locking screw connection Protection IP 50 to IP 54 with conexil in the housing, flat-gasket
More informationFlareless Bite Type Fittings
Ferulok Flareless Bite Type Fittings Ferulok Flareless Bite Type Fittings 4300 atalog BU TU WLN HBU Nut Ferrules Bulkhead Locknut Union Nuts, Ferrules, Locknuts Straights 7 7 7 7 WBU F5BU FBU GBU TRBU
More informationSuction cups with connection attachments ESS/suction cups ESV
Suction cups with connection attachments ESS/suction cups ESV Suction cups with connection attachments ESS/suction cups ESV Product range overview Suction cup shape Suction cup design Suction cup or suction
More informationMini slides SLT/SLS/SLF
Mini slides SLT/SLS/SLF Precision, rigid guide Highly flexible Adjustable end position cushioning 03/10 Subject to change Products 04/05 1 / 1 Mini slides SLT/SLS/SLF Features SLS SLF SLT SLT/SLS/SLF SLT
More informationJOHN GUEST SPEEDFIT, AIR PRODUCTS & PLUMBING - CONTENTS
JOHN GUEST SPEEDFIT, AIR PRODUCTS & PLUMBING - CONTENTS Compressed Air Technical Information 518 Compressed Air Fittings 519 Brass Compressed Air Fittings 520 Compressed Air Pipe & Accessories 521 Accessories
More informationISO 9001 CERTIFIED. Vacuum Technology. Magic Suction Cup.
ISO 9001 CERTIFIED Vacuum Technology Magic Suction Cup Magic Suction Cup Bellows cartridge (B1.5/20, B1.5/40 B2.5/20, B2.5/40) No Bellow distortion by vacuum pressure when grab the object Sealing Lip X
More information/ Push-to-conect fittings/ V TOPRING. Push-to-connect fittings Tubings Mufflers
96.830 / Push-to-conect fittings/ V. 09.6.06 TOPRING Push-to-connect fittings s Mufflers TOPFIT POLYMER PUSH-TO-CONNECT FITTINGS SERIES 40 4 MAXFIT POLYMER PUSH-TO-CONNECT FITTINGS SERIES 44 46 TOPFIT
More informationClamps with RUBBER BUSHING
Clamps with RUER USHING Order Codes p 34 Dimensions p 34 CLAMPS WITH RUER USHING Mounting example p 37 STANDARD SERIES CLAMPS WITH RUER USHING Order Codes PIPE CLAMPS AND RUER USHING MATERIAL (two clamp
More informationFOR TUBE FITTINGS OR-910N OR-910NA 5/8" 7/8" ".097" 11/16".863".116" 318-A02-1C. STOCKED O-RINGS in SPECIAL COMPOUNDS
FOR TUBE FITTINGS O-Ring Seals - Nitrile / Neoprene oints toriques d'étanchéité nitrile / néoprène can supply the right NITRILE O-Ring to suit YOUR purpose. The Nitrile O-Rings listed below are made especially
More informationCompression Style Pneumatic
Compression Style Pneumatic Compression Economical U isted Thermoplastic / Soft etal Tubing Parker etru-ok Captive Sleeve etric Tubing PT, BSPT, BSPP, etric Threads Compress-lign Captive Sleeve Two piece
More informationSPH / MA and MA2 components MCS / MA multi-connections. Technical data sheet
SPH / MA and MA2 components MCS / MA multi-connections Technical data sheet SPH / MA and MA2 components for MCS / MA automatic multi-connections Nominal bore 04, 06, 08, 12, 15, 20, 25, 37, 50 and 75 mm
More informationJOHN GUEST SPEEDFIT, AIR PRODUCTS & PLUMBING. Compressed Air Technical Information 562. Compressed Air Fittings 563. Brass Compressed Air Fittings 564
JOHN GUEST SPEEDFIT, AIR PRODUCTS & PLUMBING Compressed Air Technical Information 562 Compressed Air Fittings 563 Brass Compressed Air Fittings 564 Compressed Air Pipe & Accessories 565 ELEVEN Accessories
More informationCorona 70,000 Ft. Permeability Risetime Degradation (Mated Pair) 2.0 max MH z
NDL Ultraminiature Triaxial Connectors Connector Specifications Interface Dimensions Ø.020 Ø.082 Ø.168 Ø.162 Electrical Specifications Dielectric Center contact to intermediate contact: 1000 Vrms min Withstanding
More informationFF Series (Steel) ISO Interchange
Eaton s FF Series flat face is specifically designed for those applications where quick and easy connections and no-spill performance are essential. The FF Series is ideal for use when global interchangeability
More informationApprox. 4 s, measured in oil, with a probe Ø of 10 mm made of stainless steel. Influential effect of the ambient temperature
sales@jumo.co.uk info.us@jumo.net Page/6 Dial Thermometer Type 608225 Special features Class Display ranges from -40 C to +600 C Temperature indicator as built-in or add-on device Stainless steel case
More information60 series, 2/2 or 3/2 Ball valve
>> Port size: Rp/..., /... >> Ideally suited for most general purpose applications >> Easy installation, simple operation and maintenance free >> -way ball valves with actuator interface conforming to
More informationBS EN Class H, BS 7430 UL467 (CR105) Tightening torque 15 Nm mm mm kg CR525
Rod to tape clamp (type A) Nominal rod Max. conductor 1 2 12.7 mm 26 x 12 mm 0.1 kg CR10 8 16 mm 26 x 12 mm 0.1 kg CR10 4 20 mm 26 x 10 mm 0.1 kg CR10 8 16 mm 0 x 2 mm 0.16 kg CR108 4 20 mm 0 x 2 mm 0.16
More informationCONDUIT SYSTEMS FOR ELECTRICAL WIRES AND CABLES: ANACONDA SPECIAL FITTING SOLUTIONS
ONDUIT SYSTMS FOR LTRIAL WIRS AND ALS: FITTING SOLUTIONS Fitting selection table Anaconda special fittings. Fitting Material Temperature ( ) Thread size range Shielding Approvals Protection Page Type Housing
More informationFluoropolymer Fittings Hyper Fitting / Flare Type
Fluoropolymer Fittings yper Fitting / Flare Series KK D S QR Flare type collet construction 00 compatible xcellent heat resistance ase of installation Triple-seal xcellent flow-through characteristics
More informationLF 3600 Nickel-Plated Brass Instant Fittings
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding 00 Nickel-Plated Brass Instant ittings One fitting for all industrial
More informationInch and Metric Flaring Tooling for 1025
Inch and Metric Flaring Tooling for 1025 Flaring Tools Parflange 1025 37 Flaring and Flanging Systems Parker s Parflange 1025 machine is designed to create 37 flared tube ends. For more detailed information
More informationClamps with RUBBER BUSHING
Clamps with RUBBER BUSHING Order Codes and dimensions Standard series DIN 3015, Part 1 p 34 Order Codes and dimensions Heavy series DIN 3015, Part 2 p 35-36 clamps with rubber bushing Mounting example
More informationFlow. (l/min) (ms) N/en
66, 87 Inline / & / spool valves electromagnetic actuated, indirectly controlled G / & G / For single and double operated actuators Manual override with and without detent imple design of soft seal spool
More informationSpeed Controller with Fixed Orifice
P.G.Information (Specialized product) SP043M-025E P: JO Speed Controller with Fixed Orifice AS****-X250 Feature 1: 0.12mm SMC CORPORATION 1-16-4 Shimbashi, Minato-ku Tokyo 105-0004, JAPAN URL: http://www.smcworld.com
More informationPureFlow PEX Crimp Fittings Most widely recognized fitting system in North America
PureFlow Fittings Most widely recognized fitting system in North America 176 PureFlow Stock Fittings PEX CRIMP RINGS These copper crimp rings provide a secure connection for the Viega system. Use only
More informationMating Interfaces 1,63 (.064) 3,45 (.135) Ø3,71 (.146) MAX Ø6,61 (.260) MAX Ø3,71 (.146) MAX
SMB / SMC Cannon's SMB Snap-on and SMC Screw-on subminiature coaxial connectors have been specifically engineered for high performance and high reliability applications in both military and commercial
More informationCannon 50 Ohm Connectors
SMB / SMC Cannon's SMB Snap-on and SMC Screw-on subminiature coaxial connectors have been specifically engineered for high performance and high reliability applications in both military and commercial
More informationElectrical Test voltage (Vrms) Service sea level at m M I II
Applications Compact profile and high density connectors for all military and aeronautical purposes Standards MIL-C 38999 Series II - QPL approved NFC 93422 HE 309 VG 96912 series II PAN 6433-1 BS 9522
More informationSpecialist Suppliers of Gas Analysis Equipment FITTINGS AND TUBING CATALOGUE. What You Measure, We Manage
Specialist Suppliers of Gas Analysis Equipment FITTINGS AND TUBING CATALOGUE What You Measure, We Manage ABOUT US ABOUT US DRM Technic is a global manufacturer and supplier of gas analysis solutions and
More informationCatalog 3501E Tube to ale PTF 169C-269C ale Elbow Union Tee Compression Style, Pneumatic 169P/269P 169P 169PS 169H 179C Elbow ale Elbow ong Elbow ale
Compression Style Pneumatic Compression Fittings... 5 Compress-lign Fittings... 13 Parker etru-ok Fittings... 20 Poly-Tite Fittings... 30 Hi-uty Flareless Tube Fittings... 42 The World Standard Catalog
More informationQuick Fitting Type Check Valve. Check Valve. Release ring (polyacetal) Metalic body (nickel-plated brass) Elastic sleeve (nitrile rubber)
Features The heck Valve permits the air flow in one direction but checks the flow in the opposite direction, thus keeping the output pressure at a constant level. The heck Valve can keep the service pressure
More informationSeries Variations. General Purpose Fittings Series. Fittings & Tubing. Fittings. One-touch Fittings KQ2 Series. One-touch Fittings KQ2 Series
& One-touch connection and release Possible to use in vacuum to 00 kpa ø2 Sealant/Gasket seal Metric size tube/m, R, Rc thread connection M3 M6 2 General Purpose Series Face seal Metric size tube/g thread
More informationFlow. Flow. N/en
/ poppet valves electromagnetic actuated, directly controlled G /4 or /4 NPT Working from 0 bar up Short switching times Suited for fine vacuum down to, 0 - mbar For a.c. solenoid systems with integrated
More informationWe provide superior performing compressed air & gas systems with engineered longevity to reduce operating costs and improve productivity.
We provide superior performing compressed air & gas systems with engineered longevity to reduce operating costs and improve productivity. ENGINEERED FOR SUPERIOR PERFORMANCE Compressed Air & Gas Systems
More informationDial Thermometer. Particularities. Brief description. Technical data. Page 1/6. Data Sheet
Dial Thermometer Data Sheet 608202 Page 1/6 - discontinued - Particularities Temperature indicator for panel mounting Class 2 IP53 front protection Housing sizes: 52 mm and 60 mm dia. Bezel: 48x48 mm,
More informationSeries PC 3.5 precision subminiature connectors
Series PC 3.5 precision subminiature connectors Description Content HUBER+SUHNER PC 3.5 connectors are precision connectors for use in microwave applications up to 26.5 GHz. They are especially suitable
More informationHow to Identify Fluid Ports and Connectors. A guide to North American, British, Japanese, German (DIN metric), and ISO connections
How to Identify Fluid Ports and Connectors A guide to North American, British, Japanese, German (DIN metric), and ISO connections How to measure threads Use a thread pitch gauge to determine the number
More informationG. S50T60. B3. S1. Suction cups/grippers pigrip Modular suction cups. Product Group. Lip. Bellows or Flat Cup. Support. pigrip.
Suction cups/grippers pigrip odular suction cups Product Group pigrip Lip Bellows or lat Cup Support Dimension & Type aterial & Durometer G S25 Ø 25 mm Standard lip B1 1 bellows S1 Support type 1 S35 S50
More information21D Allfluid pressure switch, electromechanically actuated
D > > 0,... 0, bar (0,... psi), G/, / NPT > > High accuracy > > High number of switching cycles > > Microswitch approved by UL and CSA > > Fixed or adjustable hysteresis > > Shock and vibration tested
More informationFloat Flow Meter. Flow measurement for translucent liquids and gases DN10 to DN65 mm. Technical data Orifice DN 10 to 65
Float Flow Meter Flow measurement for translucent liquids and gases DN10 to DN65 mm If a medium sufficient flow rate flows from bottom to top through a vertically inserted measuring tube, then the floated
More informationHERZ STRÖMAX GM/GML/GR STRÖMAX-GM/GML Circuit Control Valve with test points STRÖMAX-GR Circuit Control Valve Data sheet STRÖMAX GM/GML/GR, Issue 0215
HERZ STRÖMAX 7GM/GML/GR HERZ STRÖMAX GM/GML/GR STRÖMAX-GM/GML Circuit Control Valve with test points STRÖMAX-GR Circuit Control Valve Data sheet STRÖMAX GM/GML/GR, Issue 0 H Rp L SW L L Dimensions in mm
More informationG 1/2 30,5 A Brass NBR 0,8 3,
4/2 way poppet valves electromagnetic actuated, directly controlled /4 & /2 Working from 0 bar up Suitable for vacuum range down.33 0-2 mbar l/s Protection class : IP 65, Ex em, Ex d TEX approved (see
More informationAusPress. Install the staple plumbing material of copper using Australian sizes for water, gas or solar (high temperature). Copper.
M AusPress Install the staple plumbing material of copper using Australian sizes for water, gas or solar (high temperature). V profile DN DN to 00 s Press a DN fitting onto copper tube in under seconds.
More informationInsertion Flowmeter for compressed air and gases DN50 - DN700 (2-28 )
The flow meter is based on the thermal mass flow measurement and is ideal for measuring the flow of compressed air and gases in pipes from DN50 (2 ) to DN700 (28 ). With the, the consumption of compressed
More informationCONNECTED BY AVENTICS PNEUMATIC CONNECTION TECHNOLOGIES
CONNECTED BY AVENTICS PNEUMATIC CONNECTION TECHNOLOIES 2 Connected by AVENTICS Expertise A reliable connection with quick release Pneumatic tubing is just as easy to release as it is to securely connect
More informationFluoropolymer Piping Equipment
luoropolymer Piping quipment New luoropolymer ittings yper ittings Series LQ luoropolymer ittings yper ittings / lare Type Series LQ New have have also also been been added added! d! New P New P Needle
More informationPSI COMPAKT SEAL PRESSURE TIGHT UP TO 5 BAR SPECIAL VERSIONS FOR DIFFERENT PIPE SYSTEMS STAINLESS STEEL PRESSURE PLATES AS STANDARD
PSI COMPAKT SEAL PRESSURE TIGHT UP TO 5 BAR SPECIAL VERSIONS FOR DIFFERENT PIPE SYSTEMS STAINLESS STEEL PRESSURE PLATES AS STANDARD ALL SPLIT VERSIONS OF OUR STANDARD COMPAKT SEALS ARE FOLDABLE WWW.PSI-PRODUCTS.COM
More informationUniversal Compact Extruded Cylinders
Universal Compact Extruded Cylinders Clippard s new Compact, Extruded Body Cylinders are available in double acting, double rod, single acting spring return, and single acting spring extended models. Universally
More informationTILBURY STEEL SERVICE CENTRE
TILBURY STEEL SERVICE CENTRE 159 Queen Street North Tilbury, ON, N0P 2L0 Voice: 519-682-0000 Toll-Free: 1-800-565-1077 Fax: 519-682-0004 Email: tsales@tilburysteel.com STOCK BOOK & REFERENCE GUIDE Tilbury
More informationprecision pipe fittings
Precision Pipe Fittings 1 8 to 1 sizes 316 stainless steel, brass, and exotic materials NPT threads HOKE Inc. PO Box 4866 Spartanburg, SC 29305-4866 Phone (864) 574-7966 Fax (864) 587-5608 www.hoke.com
More informationThe Custom Interconnect Leader
SC Series.337.307.040.003.085.194 MIN FLARE TO MEET GAGE TEST.276 MIN.549.781 ELECTRICAL Nominal Impedance: Frequency Range: Voltage Rating: Dielectric Withstanding Voltage: Insulation Resistance: VSWR:
More informationFW FIELD TV. IEEE 1394 Connection System for Harsh Environments. Description. Applications
Description FW FIELD TV IEEE 1394 Connection System for Harsh Environments FW Field allows you to use a standard IEEE1394 connection in harsh environments: Sealed against fluids and dusts (IP67) Shock,
More informationNew Products 10/2016. New Products
New Products 10/2016 New Products Quick hange -hannel lamps Tubular lamps Remarks The brochure has been created with the most possible diligence. All details are based on experiential determined values,
More informationNon-Drip Quick Connect Couplings Modular constructions offering just the right coupling for every fluid application. non-drip
Non-Drip Quick Connect Couplings Modular constructions offering just the right coupling for every fluid application non-drip 2 Innovative Products for Demanding Applications Innovative Couplings for Fluid
More informationNickel Plated BSP & Hose Fittings
Nicke Pated SP & Hose ittings M3, M5, 1 8" 1 1 2" SP Suitabe for use in most genera industria appications right nicke pated brass ompact design Reiabe and corrosion resistant Washers incuded where necessary
More informationHow to Identify Fluid Ports and Connectors. A guide to North American, British, Japanese, German (DIN metric), and ISO connections
How to Identify Fluid Ports and Connectors A guide to North American, British, Japanese, German (DIN metric), and ISO connections How to measure threads Measure the thread diameter with an / caliper. When
More informationOperating pressure (bar) kv factor (m 3 /h) *3)
/ way poppet valves (stainless steel) electromagnetic actuated, directly controlled G /8, G /4 or /4 NPT Working from 0 bar up Assembled free of oil and grease Suited for fine vacuum down to,33 0 - mbar
More informationSemi-rotary drives DRVS
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch
More informationThe Custom Interconnect Leader
7-16 Series.354.276.843.811 ELECTRICAL Nominal Impedance: Frequency Range: Voltage Rating: Dielectric Withstanding Voltage: Insulation Resistance: VSWR: Intermodulation: 50 ohms DC to 7 GHz 2,700 volts
More informationOblong suction cups, series VPO
Oblong suction cups, series VPO Y E G Ø D X1 X Y1 Ø A2 Ø A3 Ø A4 2 2 lamping collar E G Ø D 1 Ø A 1 This range of suction cups is used for the handling of long products, such as pens, tubes and bottles,
More informationOperating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and gold plated contacts available High
Operating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and contacts available High performance insulation material General characteristics and technical
More informationKT Inserts, small. Product description. Assembly. Specification KT grey. Specification KT black
KT Inserts, small Description Type Order No Order No Clamping range PU grey black BTK BTK 41251 41351 Blind insert 10 KT cable inserts small are used with the following cable entry frames: KEL - Page 6-13
More informationMULTI ROTARY SWITCH MR50
MAIN FEATURES 1 / 2 " SELECTOR SWITCH Dimensions Ø ½ (12.7 mm) Switching mode: Shorting or non-shorting Selector switch positions up to 16 Switching torque up to 6 Ncm Gold plated contacts Rugged design
More informationContact Dial Thermometers
Data sheet 6852 Page 1/11 Contact Dial Thermometers FL 21 Special features Class 1.5 Display range -4 C to +6 C Temperature controller with actual value display as built-in or add-on device in a stainless
More information