pneumatic function valves
|
|
|
- Rosamond Mitchell
- 5 years ago
- Views:
Transcription
1 pneumatic function valves Fluidline omponents, Inc lawson, MI
2 flow control regulators meter out version meter in version bi-directional version fine adjustment screw locknut fine adjustment screw locknut fine adjustment screw locknut check valve check valve A B Legris flow control regulators control the speed of a pneumatic cylinder. In the one-way version, the exhaust or inlet air flow is controlled by an adjustable restrictor. The inlet or exhaust flow is unrestricted full bore. In a bi-directional version, they control air supply in both exhaust and supply flow. Depending upon the model, Legris flow regulators may be fitted on the cylinder or in the compressed air line. However, flow regulation (and therefore cylinder control speed) is more precise and constant when positioned near the cylinder. In this way, it is possible to avoid the elastic effect of the compressed air contained in the pipework between the control valve and cylinder. Direct mounting of the banjo flow regulator fitting onto the cylinder is therefore the optimum solution. specifications: suitable fluid: compressed air working pressure: 15 to 145 psi working temperature: 30 to 160 F the large range of Legris flow control regulators answers the specific needs of modern pneumatic applications for standard applications Which material? in glass reinforced nylon for manual adjustment with locking nut guaranteeing stability of adjustment Which type of adjustment? with external screw for use in severe conditions for use in severe conditions for connection to the cylinder or threaded control valve for connection to a cylinder or manifold fitted with cartridge connections for standard applications requiring full flow performance for very small sized cylinders requiring precise and accurate adjustment in metal in stainless steel Which type of fitting? with, UNF, BSP parallel and metric, BSP taper threads plug-in ompact or miniature? compact miniature for adjustment with screwdriver and prevention of unwanted adjustment for standard applications for vertical or angled tube exit where cylinder access is difficult or where another function valve is attached to the cylinder port knobless Which configuration? Our production process includes manufactured dating for all flow control regulators. This guarantees their quality and traceability. 90 degree swivel outlet in-line
3 lock-out valves with instant fitting with threaded fitting 7885 ØD(in) 1/4 1/ /4 1/ /8 3/ /2 1/ /8 1/ /4 1/ /8 3/ /2 1/ BSP parallel ØD(mm) 6 G1/ G1/ G1/ G3/ G3/ G1/ BSP parallel 1 2 G1/4 G1/ G1/4 G1/ G3/8 G3/ G1/2 G1/ BSP taper Visual identification of different threads = ØD(mm) = BSP parallel = BSP taper 6 R1/ R1/ R1/ R3/ R3/ R1/ BSP taper 1 2 R1/4 R1/ R1/4 R1/ R3/8 R3/ R1/2 R1/ Fluidline omponents, Inc lawson, MI check valves in-line for inch tube Visual identification of different threads = /UNF = BSP parallel = BSP taper ØD(in) 5/ / / / for metric tube ØD(mm) stainless steel - unidirectional, double-female 1/ / / / BSP version is also available with threaded fitting and UNF BSP taper Meter in version - green button Meter out version - red button ØD(in) Meter Out Meter In 5/ /32 1/ /4 1/ /4 1/ /8 1/ /8 3/ ØD(mm) Meter Out Meter In 4 M G1/ G1/ G1/ G1/ G1/ G3/ G3/ G1/ ØD(mm) Meter Out Meter In 4 R1/ R1/ R1/ R1/ R1/ R3/ R3/ R1/
4 flow control regulators nylon version miniature UNF and ØD Meter Out (A) Meter In (B) ØD Meter Out (A) Meter In (B) Bi-directional ( ) 3 M3x M5x M5x G1/ M5x G1/ G1/ G1/ G1/ G3/ BSP taper ØD Meter Out (A) Meter In (B) knobless, UNF and ØD(in) Meter Out (A) / /8 1/ / /32 1/ / /4 1/ /4 1/ R1/ R1/ R1/ R3/ R1/ R1/ R3/ / /8 1/ / /32 1/ / /4 1/ /4 1/ plug-in, for inch tube ØD Meter Out (A) Meter In (B) 1/ / / plug-in, for metric tube ØD Meter Out (A) Meter In (B) compact ØD Meter Out (A) Meter In (B) Bi-directional () 5/32 1/ /32 1/ /4 1/ /4 1/ /8 1/ /8 3/ BSP parallel ØD Meter Out (A) Meter In (B) Bi-directional () 4 G1/ G1/ G1/ G1/ G1/ G3/ G1/ G3/ G3/ G1/ BSP taper ØD Meter Out (A) Meter In (B) Bi-directional () R1/ R1/ R1/ R1/ R1/ R3/ R1/ R3/ R1/ R1/ R3/ R1/ plug-in, metric tube ØD Meter Out (A) Meter In (B) swivel outlet, ØD Meter Out (A) 1/4 1/ /4 1/ /8 1/ /8 3/ A B swivel outlet, UNF and ØD Meter Out (A) / /32 1/ swivel outlet, ØD Meter Out (A) Meter in (B) 4 M5x G1/ M5x G1/ swivel outlet, BSP taper ØD Meter Out (A) 4 R1/ R1/ swivel outlet, BSP parallel ØD Meter Out (A) Meter In (B) 6 G1/ G1/ G1/ G1/ G3/ G1/ G3/ G3/ G1/ swivel outlet, BSP taper ØD Meter Out (A) 6 R1/ R1/ R1/ R3/ R1/ R3/ R3/ R1/
5 flow control regulators nylon version knobless compact UNF and ØD Meter Out (A) Meter In (B) 1/ /8 1/ / /32 1/ / /4 1/ /4 1/ /16 1/ /16 1/ /8 1/ /8 3/ ØD Meter Out (A) Meter In (B) Bi-directional () 4 M5x G1/ M5x G1/ G1/ G1/ G1/ G3/ G1/ G3/ G1/ G3/ G1/ in-line for inch tube ØD One-way Bi-directional 5/ / / / / for metric tube ØD One-way Bi-directional panel mountable, for metric tube ØD One-way A B with threaded fitting, or BSP parallel () One-way (BSPP) One-way 1/ G1/ / G1/ / G3/ / G1/ flow control regulators metal version A B 7105 push-to-connect port, ØD Meter Out (A) 5/32 1/ /4 1/ /4 1/ /8 1/ /8 3/ push-to-connect port, BSP parallel ØD Meter Out (A) Meter In (B) 4 G1/ G1/ G1/ G1/ G1/ G3/ G1/ G3/ G3/ G1/ G1/ Fluidline omponents, Inc lawson, MI threaded port, Meter Out (A) 1/ / / / threaded port, BSP parallel Meter Out (A) Meter In (B) G1/ G1/ G3/ G1/ knobless with universal brass compression fitting, BSP parallel ØD Meter Out (A) 4 G1/ G1/ G1/ G1/ G1/ G1/ G3/ G1/ G3/ G1/ Quick identification of Legris flow control regulators To assist differentiation, each version is identified by the corresponding pneumatic symbol and a letter : one-way adjustment - meter out version : letter A - meter in version : letter B bi-directional adjustment : letter
6 pneumatic threshold sensor fittings with push-to-connect fitting UNF and ØD 5/ /32 1/ /32 1/ /32 3/ /32 1/ with threaded fitting 7808 Pilot Port / / / ØD 4 M5x G1/ G1/ G3/ G1/ Pilot Port M5 M5x M5 G1/ M5 G1/ M5 G3/ M5 G1/ /7829 electric, UNF and / / / / Visual identification of different threads = /UNF = BSP parallel 7828 electric, M5x G1/ G1/ G3/ G1/ flow control regulators - stainless steel 7810/7815/7812/7817 UNF and 7835 meter out bi-directional 10/ / / / / ØD meter out 5/32 1/ /32 1/ /4 1/ /4 1/ /8 1/ /8 3/ quick exhaust valve - nickel plated brass / / / / Fluidline omponents, Inc lawson, MI 48017
UNITED STATES MEXICO CANADA
www.legris.com Online catalog with technical information and training module to help you implement the right solution. Find technical data on your fitting and download a CAD in many different formats.
Compression fittings Metric and inch
Fittings Compression fittings Metric and inch Ø 4 to 28 mm tube Ø 3 /16" to È" tube Wide range of types and sizes. Rugged and durable. Suitable for use under extreme conditions of temperature and pressure.
pneumatic push-in fittings system LF 3000
pneumatic push-in fittings system LF 3000 Parker Legris connectic products are available from MARYLAND METRIS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
LF3800 stainless steel push-to-connect fittings
3800 push-to-connect fittings principle of system 3800 push-to-connect fitting system The 3800 range provides the advantages of push-to-connect fittings instant connection and disconnection for a wider
Quality, Precision and Unbeatable Value!
PUSH IN FITTINGS 31 RX Push In Fittings 1 High quality Push In Fittings in composite materials or all nickel plated brass. 100% leak tested during production, these fittings are suitable for both pneumatic
10 series (Pneufit) Push-in fittings Ø mm tube size, BSP threads
0 series (Pneufit) Push-in fittings Ø 4... 4 mm tube size, SP threads Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All SP taper threads pre-coated
push-to-connect fittings system LF3000
legris products are available from: MARYAD MTRIS push-to-connect fittgs system 3000 Order from: Maryland Metrics email: techfo@mdmetric.com ph. (800)638-1830 fx. (800)87-939 prciple of system 3000 legris
PNEUFIT 10 series Push-in fittings
PNUFIT 0 series > > Port size: Ø 4... 4 mm O/D tube, SP threads > > Very compact units > > asy tube insertion for rapid assembly of pneumatic circuits > > Straight adaptors feature internal hexagon for
Composite Push-In Fittings - NPTF/INCH
composite FITTINGS Composite Push-In Fittings - F/INCH Tube diameter: Ø /8", 5/32", /4", 5/6", 3/8", /2" Connections /8, /4, 3/8, /2 F These new models have been released in technopolymer, maintaining
10 series (Pneufit) Push-in fittings Ø mm O/D tube, BSP threads
0 series (Pneufit) Push-in fittings Ø 4... 4 mm O/D tube, SP threads Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All SP taper threads pre-coated
Pneufit C composite and Pneufit M fittings Inch Ø 1/8... 1/2 O/D tube
Pneufit composite and Pneufit M fittings Ø 1/8... 1/2 O/ tube Norgren Pneufit fittings are ready to use, offering fast assembly with no need for tools providing optimum flow. Pneufit offers a broad range
Flow control valves Series SCU, MCU, SVU, MVU, SCO, MCO
S E R I E S SCU MCU SVU MVU SCO Flow control valves Series SCU, MCU, SVU, MVU, SCO, Unidirectional and bidirectional banjo flow controllers Ports M, G1/8, G1/4, G3/8, G1/2 A U T O M A T I C These unidirectional
PNEUMATICS FITTINGS See easy to make a connection on page Technical Specification shown on pages
PNEUMATICS FITTINGS Super Speedfit Push-in fittings have been specially designed for miniature pneumatics applications. They provide a fast and secure way of connecting tubes and offer considerable advantages
15 and 16 Series BSP and hose fittings
SP and hose fittings > > Port size: M5, 1/8... 1 > > xtensive range of shapes and sizes including manifolds > > High temperature and pressure copper sealing washers supplied with ISO threads Technical
Compression Fittings 34 Series Inch
4 Series /6" O/ l Wide range of types and sizes l Rugged and durable l Suitable for use under extreme conditions of pressure and temperature l Ideal for most general industrial applications Technical ata
How to Identify Fluid Ports and Connectors. A guide to North American, British, Japanese, German (DIN metric), and ISO connections
How to Identify Fluid Ports and Connectors A guide to North American, British, Japanese, German (DIN metric), and ISO connections How to measure threads Use a thread pitch gauge to determine the number
BSP & HOSE Fittings M5, 1/8... 1
SP & HOS Fittings M5, 1/8... 1 Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All taper threads pre-coated with non-ptf based sealant Straight Adaptors
PL Nickel-Plated Brass Spigot Fitting Range
P Nickel-Plated Brass Spigot itting Range P nickel-plated Brass Spigot ittings Stud ittings BP 3BP 4BP BSPP 8BP Metric BP 3BP 4BP BSPP 8BP Metric RBP R3BP SBP S3BP Banjo itting Tube-to-Tube ittings omplementary
14 Pressure Measurement. Measuring Devices Description Pressure range Connection Device Page
Measuring Devices Pressure range Connection Device Page Digital display mounting, für niedrige Drücke 0 2. mbar / 2. bar 4 mm tube MPV, MPA.02 portable, hand-operated 0 1 mbar / 10 bar 4 mm tube MHA.03
INDUSTRIAL PNEUMATICS - valves
Ball valves Mini ball valve 6560 type Body material: Ball material: Ball seal: Spindle seal: Working temp.: Nickel-plated brass Chromium-plated brass PTFE NBR From -20 C up to +80 C General purpose valve
Q-Flow product information. Variable area flowmeters for gases and liquids
Q-Flow product information Variable area flowmeters for gases and liquids MyScale Air mm ALU Attractive design and price: Variable area flowmeters Q-Flow The proven variable area flowmeter with compact,
Easy Flow Indicator Magnetisch-Induktiver Durchflussmesser. Type 8024 For Insertion Fittings. Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI
Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI Advantages / Benefits Reduced costs of ownership up to 6% Economic integration in pipe systems without any additional piping Shows flow rate with a clear,
1COMPRESSION FITTINGS
SECTION 1COMPRESSION FITTINGS TECHNICAL INFORMATION Wade Couplings consistently produce cost effective, reliable leak-tight joints. All Wade couplings are specially designed for use with Wade nuts and
LF 3600 Nickel-Plated Brass Instant Fittings
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding 00 Nickel-Plated Brass Instant ittings One fitting for all industrial
Inch and Metric Flaring Tooling for 1025
Inch and Metric Flaring Tooling for 1025 Flaring Tools Parflange 1025 37 Flaring and Flanging Systems Parker s Parflange 1025 machine is designed to create 37 flared tube ends. For more detailed information
JOHN GUEST SPEEDFIT, AIR PRODUCTS & PLUMBING - CONTENTS
JOHN GUEST SPEEDFIT, AIR PRODUCTS & PLUMBING - CONTENTS Compressed Air Technical Information 518 Compressed Air Fittings 519 Brass Compressed Air Fittings 520 Compressed Air Pipe & Accessories 521 Accessories
Standardized valve series MI-01 Connection pattern according to ISO 5599/1, size 1, 5/2- and 5/3-way NG and 1700 Nl/min (1.636 and 1.
Standardized valve series MI-01 Connection pattern according to ISO 5599/1, size 1, 5/2- and 5/3-way NG 9 1610 and 1700 Nl/min (1.636 and 1.728 Cv) Order code Series and function 1) Plug socket see page
Code Type I.D. (mm) O.D. (mm) Operating Pressure (PSI) Min. Burst Pressure (PSI)
411 Series Braided Teflon Hose Order by Phone +44 (0) 121 525 5800 Type 411 Teflon Smooth Bore Hose The exceptional resistance of Teflon to high temperatures, permeability, chemical attack, water absorption
/ Push-to-conect fittings/ V TOPRING. Push-to-connect fittings Tubings Mufflers
96.830 / Push-to-conect fittings/ V. 09.6.06 TOPRING Push-to-connect fittings s Mufflers TOPFIT POLYMER PUSH-TO-CONNECT FITTINGS SERIES 40 4 MAXFIT POLYMER PUSH-TO-CONNECT FITTINGS SERIES 44 46 TOPFIT
JOHN GUEST SPEEDFIT FITTINGS
G6300 JOHN GUEST SPEEDFIT FITTINGS Grey acetyl copolymer construction with nitrile o-rings. FDA approved materials on all wetted surfaces. Meet NSF International Standards 51 and 61. Part Cross Pipe PRICE
How to Identify Fluid Ports and Connectors. A guide to North American, British, Japanese, German (DIN metric), and ISO connections
How to Identify Fluid Ports and Connectors A guide to North American, British, Japanese, German (DIN metric), and ISO connections How to measure threads Measure the thread diameter with an / caliper. When
Pressure sensors SPAN
Features At a glance Communication interface Convenient design Compact design 30x30 mm Degree of protection IP40 Reduced weight with QS4 Universal pressure measurement Pressure and vacuum 13 pressure measuring
EE771 Series. Flowmeter for compressed air and gases in Industrial Applications. EE771 Compact. EE771 remote probe
Series Flowmeter for compressed air and gases in Industrial Applications The flowmeter of the series, based on the measurement principle of thermal mass flow, is ideally suited for the measurement of flow
brass compression fittings
compression fittings principle of universal compression fittings The range is called universal as it offers the maximum number of direct fitting alternatives with the minimum number of components. Tube
Clamping Device, Series 2709
Electric Drives and Controls Hydralics Linear Motion and Assembly Technologies Pneumatics Service Clamping Device, Series 2709 Technical data Pneumatic Open mechanism Technical Data Type Power transmission
Insertion Flowmeter for compressed air and gases DN50 - DN700 (2-28 )
The flow meter is based on the thermal mass flow measurement and is ideal for measuring the flow of compressed air and gases in pipes from DN50 (2 ) to DN700 (28 ). With the, the consumption of compressed
Quick Fitting Type Check Valve. Check Valve. Release ring (polyacetal) Metalic body (nickel-plated brass) Elastic sleeve (nitrile rubber)
Features The heck Valve permits the air flow in one direction but checks the flow in the opposite direction, thus keeping the output pressure at a constant level. The heck Valve can keep the service pressure
accurate measurement of compressed air consumption and leakage detection Calibration certificates and continous calibration, OEKD calibration service
Series Flowmeter for compressed air and gases in Industrial Applications The flowmeter of the series, based on the measurement principle of thermal mass flow, is ideally suited for the measurement of flow
Pressure sensors SPAB, with display
Key features, product range overview At a glance Variants: Plug M8x1 with electric adapter SASC Plug, square design L1 Cable version with connecting cable NEBS Compact design 30 x 30 mm Multi-coloured,
red-y smart series product information Thermal Mass Flow Meters and Controllers for Gases
red-y smart series product information Thermal Mass Flow Meters and Controllers for Gases Reliable and accurate: Thermal Mass Flow Meters and Controllers Reliable technology and industry standard interfaces
Assembly and Maintenance
Assembly and Maintenance Assembly and Maintenance Test Pumps Pressure Test Pumps Tests all types of installations such as heating, compressed air and refrigeration systems, oil installations, fire lines
SPCH/ Big bottle blowing block
> > Blowing block for linear and rotating blow moulding machines > > Digital position indicator - counter with four decade from 000.0 to 00.0 > > Best suited for PET bottles from 5 up to 30 litres (up
VSG, VSL, VSKH and VSKV Two-line Metering Devices
VSG-KR These high quality, galvanized steel metering devices are designed for high-pressure (up to 400 bar) two-line systems. They can also be used in low to medium-pressure systems. They are available
Accessories for Lubrication Systems Product Catalogue
Accessories for Lubrication Systems Product Catalogue Productivity is key in today s global economy. Proper lubrication increases uptime and makes maintenance routines simple. Accessories for Lubrication
Semi-rotary drives DRVS
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch
PNEUMATIC TUBING FITTING
2011 PNEUMATIC TUBING FITTING CATALOGUE FLYTECH ENGINEERING SDN BHD GENERAL INFORMATION Flytech had cooperated with ISAIAH GROUP from Taiwan to promote the Pneumatic Fitting & Tubing. The company takes
Pneumatic Control/Feedback
897 /Feedback Type 897 can be combined with... Compact design Integrated pilot valve with manual override Internal control air routing Bright LED position indicator Automatic end position adjustment Type
Pneumatic Control/Feedback
897 /Feedback Type 897 can be combined with... Compact design Integrated pilot valve with manual override Internal control air routing Automatic end position adjustment With ATEX II cat. G/D and cat. D/G
PureFlow PEX Crimp Fittings Most widely recognized fitting system in North America
PureFlow Fittings Most widely recognized fitting system in North America 176 PureFlow Stock Fittings PEX CRIMP RINGS These copper crimp rings provide a secure connection for the Viega system. Use only
ISO*STAR (SXE, SXP) 5/2 & 5/3 Solenoid and pilot actuated glandless spool valves
*STR (SX, SXP) / & / > > Sub-base mounted, 99- s, or > > Specially coated glandless spool and sleeve for long trouble-free life > > Integral flow regulators available on and s for cylinder speed control
JOHN GUEST SPEEDFIT, AIR PRODUCTS & PLUMBING. Compressed Air Technical Information 562. Compressed Air Fittings 563. Brass Compressed Air Fittings 564
JOHN GUEST SPEEDFIT, AIR PRODUCTS & PLUMBING Compressed Air Technical Information 562 Compressed Air Fittings 563 Brass Compressed Air Fittings 564 Compressed Air Pipe & Accessories 565 ELEVEN Accessories
RMI and RMP multi-couplings for fast tool change on injection molding and die cast equipment
RMI-RMP L100.05 us B RMI and RMP multi-couplings for fast tool change on injection molding and die cast equipment STÄUBLI CORPORTION P.O. BOX 189 - DUNCN - S.C. 29334 PHONE 864/433-1980 TOLL-FREE NUMBER
SCHMIDT PneumaticPress
Maximum Pressing orce from 1.6 kn to 6 kn / 35 lbs. to 13,49 lbs. SCHMIDT PneumaticPresses consist of a modular system suitable for optimal transforming, joining and assembling operations within the pressing
MDT 2000 Magnetostrictive linear position transducer
Description MDT 2000 is a magnetostrictive linear displacement transducer. The position value is obtained by measuring the flight time elapsed between an electrical pulse, sent in a special waveguide,
Lift Up Floor Locks Multi-Directional Castor. W Series. M Series (full stainless steel) WHEELS & CASTORS
Lift Up Floor s Multi-Directional Castor K Series M Series O Series M Series (full stainless steel) W Series WHEELS & CASTORS WWW.SITECRAFT.COM.AU WHEELS & CASTORS Lift Up Floor s Used on warehouse trolleys,
Direct solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Series 55 Individual mounting Series inline 35 Sealed solenoid enclosure Manual operator 100 200 Ext. pilot port Ext. pilot Pilot filter Pilot exh. 55
Double piston cylinder, Series TWC Ø6-32 mm double-acting with magnetic piston cushioning: elastic
Bosch Rexroth AG Pneumatics Ambient temperature min./max. +0 C / +60 C Medium Compressed air Max. particle size 5 µm Oil content of compressed air 0 mg/m³ - 1 mg/m³ Pressure for determining piston forces
Electromechanical pressure switches
Presentation Electromechanical pressure switches For control circuits, types ACW and ADW Presentation Pressure switches type ACW and ADW are switches for control circuits, with an adjustable differential.
Cool Drawer Dual Sensor
The Cool Drawer Dual Sensor is designed for use in critical processes where it is desirable to have a second crystal in the vacuum chamber. Water cooled, cast stainless steel sensor body, two Cool Drawer
Pneumatic Control/Feedback
897 /Feedback Type 897 can be combined with... Compact design Integrated pilot valve with manual override Internal control air routing Bright LED position indicator Automatic end position adjustment Type
V03, V04 and V05 Series
V03, V04 and V05 Series / and 3/ Poppet Valves Electrically Actuated G 1 8, G 1 4, CNOMO and Interface Extensive range of power and orifice size options Removable coil Manifold rail for 1 to 0 valves Operating
Specialist Suppliers of Gas Analysis Equipment FITTINGS AND TUBING CATALOGUE. What You Measure, We Manage
Specialist Suppliers of Gas Analysis Equipment FITTINGS AND TUBING CATALOGUE What You Measure, We Manage ABOUT US ABOUT US DRM Technic is a global manufacturer and supplier of gas analysis solutions and
Test 12 Connection Thread S12,65 x 1,5. Test Coupling with Piston Valve. Fast Coupling for. Advantages. Working Pressure. Media.
Test 12 Connection Tread S12,65 x 1,5 Introduction SKK12 Test Coupling wit Piston Valve Test Coupling SKK12 Internal Piston Vibration Safety O-ring Spring Sealing at Port Connection Port Connection Fast
Pressure reducing valve. Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI
Pressure reducing valve in straightway form NPS 1-6 Pressure reducing valve Pressure regulating valve, straight through with diaphragm actuator DMA Actuator with rolling diaphragm Cast steel Fig. 701 Page
Series Variations. General Purpose Fittings Series. Fittings & Tubing. Fittings. One-touch Fittings KQ2 Series. One-touch Fittings KQ2 Series
& One-touch connection and release Possible to use in vacuum to 00 kpa ø2 Sealant/Gasket seal Metric size tube/m, R, Rc thread connection M3 M6 2 General Purpose Series Face seal Metric size tube/g thread
Diagnostics (Physical)
DeviceNet Spanner Rugged, Fully Potted Stations IP 67 Protection Communicate Between s Connect Two DeviceNet Networks FDN-DN1 Electrical Operating Current: 125 ma from segment A, 30 ma from segment B Power
Plumbing Brass Specification Guide
Plumbing Brass Specification Guide www.wattscanada.ca The Dial-ese Cartridge, a Standard in Canadian Plumbing for 0 Years Since its conception in the early 0s, the Dial-ese cartridge has proven to be one
V GM C4500 C5500
Illustrated Parts List for VMAC System System V900099 2008-2007 GM C4500 C5500 LMM Duramax 6.6L Diesel without dual alternators System V900098 2007-2006 GM C4500 C5500 Duramax 6.6L Diesel without dual
Direct solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Series 57 Individual mounting Series inline 35 To accumulator Sealed solenoid enclosure 100 200 Ext. pilot port Pilot valve Function plate From accumulator
More Precision. eddyncdt // Eddy current sensors for displacement and position
More Precision eddyncdt // Eddy current sensors for displacement and position 18 High precision eddy current displacement measurement eddyncdt 00 - Micrometer accuracy - Ideal for fast measurements: Bandwidth
Compressed Air Systems Pneumatic Fittings LLDPE Tube
John Guest Limited Horton Road, West Drayton, Middlesex UB7 8JL, England Tel: 01895 449233 Fax: 01895 420321. www.johnguest.com and are registered trademarks of John Guest International Limited Copyright
Flowtronic D 607 Series
Flowtronic D 607 Series Proportional Technology www.asco.com FLOW CONTROL: 607 SERIES FLOWTRONIC D Flowtronic D Flowtronic D is a digitally operated flow controller up to 70 SCFM (2000 Nl/min). The Flowtronic
Stainless One-touch Fittings. Applicable Tubing. Tube material Tube O.D. Specifications. Thread Nut Sealant (Thread portion) Component Materials
Stainless One-touch Fittings Series KG Guide Collet Chuck Accepts nylon, soft nylon and polyurethane tubes. as large retaining force. Chuck certainly bites tube and collet increases retaining force. Release
Compact Bellows Pumps
Compact Bellows Pumps Compact Bellows Metering Pumps were specifically designed for metering applications requiring low discharge pressures. Compact pumps have been successfully applied in photo, X-ray
Mini slides SLT/SLS/SLF
Mini slides SLT/SLS/SLF Precision, rigid guide Highly flexible Adjustable end position cushioning 03/10 Subject to change Products 04/05 1 / 1 Mini slides SLT/SLS/SLF Features SLS SLF SLT SLT/SLS/SLF SLT
CAMOZZI PNEUMATIC PRODUCTS. Mechanically Operated Valves. Manually Operated Valves. Flow Control Valves and Pressure. Switches
CAMOZZI PNEUMATIC PRODUCTS Filters 358 Mechanically Operated Valves 390 Pressure Regulators 359 Manually Operated Valves 392 Lubricators 360 Automatic Valves 395 Filter / Regulators 361 Flow Control Valves
FULL COLOR TAB #7 MSE, MSR
FULL COLOR TAB #7 MSE, MSR 117 MS - How to Order FORCE MULTIPLYING CYLINDERS SERIES MS : MULTI-STAGE The TRD MSE and MSR Series are double acting, single rod end cylinders that multiply the force output
T EN TROVIS Electropneumatic Positioner
T 8484-1 EN TROVIS 3730-1 Electropneumatic Positioner Application Single-acting positioner for attachment to pneumatic globe and rotary valves. Self-calibrating, automatic adaptation to valve and actuator.
Illustrated Parts List for VMAC System V Ford SuperDuty F250-F L Gas V8 Engine
Illustrated Parts List for VMAC System V900112 2014-2011 Ford SuperDuty F250-F350 6.2L Gas V8 Engine 1 - Kit Pack List... 2 2 - Fastener Pack, 3800735, V900112... 4 4 - Compressor Sub Components, P120004...
Direct solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Series 59 Individual mounting Series inline 35 100 Ext. pilot port Accumulator EXH. Pilot valve Function plate From accumulator Pilot exhaust To accumulator
80265 series, 3/2 Indirect solenoid actuated poppet valve
> > Port size: G/... G > > High flow rate > > Optionally air pilot operated > > High repeatability of switching time > > Variable valve solenoid combination Technical features Medium: Compressed air, filtered,
Direct solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Series 1300 Individual mounting Series sub-base plug-in 35 100 Pilot air accumulator Internal pilot supply check valve Moisture and dust seal Manual operator
This is trial version
s, s, Ejector coupling devices, Unscrewing components, Two-stage ejectors, Latch locking units, Mould slides-modular system 2.01 2.02 Ordering example : Z 40 / 1,6 x 40 Shaft Overall length Z02/... 2.1
Mini Slides DGSL Metric Series Overview
Mini Slides DGSL Metric Series Overview High load capacity and positioning accuracy Maximum flexibility thanks to eight sizes Guide unit with high linear and parallel precision Simple coarse adjustment
AHC System. Specifications. Series MA210 MA310 Positioning Max. transportable mass
AHC System Series Automatic exchange of robot hand tools, FMS (flexible manufacturing system) implemented for assembly lines. The robot hand tools change automatically to accommodate workpieces of different
KUHLMAN INSTRUMENT COMPANY 5000K WARRANTY
KUHLMAN INSTRUMENT COMPANY 5000K WARRANTY The 5000K is warranted for one year against defects in material or workmanship. This warranty does not cover water or physical damage, damage from over pressure
Temperature sensors and accessories for heat and cooling measurement points
Temperature sensors and accessories for heat and cooling measurement points Applications Temperature sensors are metrological components for heat or cold measuring points. They are used in pairs and measure
LB74G - EXCELON Modular System General purpose filter/regulator
LBG - EXCELON Modular System > Port size: /... / (ISO G/PFT) > Push to lock adjusting knob with optional tamper resistant accessory > Excelon design allows in-line installation or modular installation
FISCHER MINIMAX TM SERIES
TECHNICAL SPECIFICATIONS FISCHER TM SERIES Fischer Connectors SA All rights reserved Web version 1.0-03.2016 Changes without prior notice FISCHER TM SERIES KEY FEATURES The Fischer MiniMax Series increases
SMD 1B / SMD 2 / SMD 3 flow meters
1-3021-EN Modular design for oil circulating lubrication systems with gearwheel-type flow indicator and bypass system SMD 1B SMD 2 SMD 3 Example of SMD in a stainless steel cabinet Application Flow meters
HERZ STRÖMAX GM/GML/GR STRÖMAX-GM/GML Circuit Control Valve with test points STRÖMAX-GR Circuit Control Valve Data sheet STRÖMAX GM/GML/GR, Issue 0215
HERZ STRÖMAX 7GM/GML/GR HERZ STRÖMAX GM/GML/GR STRÖMAX-GM/GML Circuit Control Valve with test points STRÖMAX-GR Circuit Control Valve Data sheet STRÖMAX GM/GML/GR, Issue 0 H Rp L SW L L Dimensions in mm
6215L Inline & NAMUR series, 3/2 & 5/2 Indirect solenoid actuated spool valve
L Inline & NMUR series, / & / > Port size: / (ISO /NPT) or flanged with NMUR interface > Suited for outdoor use under critical environment conditions (see solenoid list) > Variable valve solenoid combination
Zone Pressure Touch (ZPT) Sensor - Standard Range
Product Identification BAPI s Touch Pressure Sensor is an accurate, rugged and economical solution for measuring and reporting duct/ building static pressure, room-to-room differential pressure or air
Speed Controller with Fixed Orifice
P.G.Information (Specialized product) SP043M-025E P: JO Speed Controller with Fixed Orifice AS****-X250 Feature 1: 0.12mm SMC CORPORATION 1-16-4 Shimbashi, Minato-ku Tokyo 105-0004, JAPAN URL: http://www.smcworld.com
V88 series Redundant valve manifold systems - Semi modular 1oo2 Safety, 2oo2 Availability and 2oo3 Safety and Availability
oo Safety, oo Availability and oo Safety and Availability > > Semi modular design - Maxseal valves > > Stainless steel visual indicators and exhaust guards as standard > > able terminations inside coil
ISO*STAR - ATEX version (SXE, SXP) 5/2 & 5/3 Solenoid and pilot actuated glandless spool valves
*STR - TX version (SX, SXP) / & / > > Sub-base mounted, 99- s, or > > Specially coated glandless spool and sleeve for long trouble-free life > > Integral flow regulators available on and s for cylinder
Valve terminal RE-10 with Multi-pin, AS-Interface or bus connection 4 12 valve stations, 300 Nl/min (0.305 Cv)
Type of connection = AS = B1 = B6 Order code RE-10/08-M-1-060 Series Number of stations Multi-pin: 4, 6, 8, 10, 12 Bus versions: 4, 8, 12 Electrical options M-1 = Multi-pin D-Sub plug AS3 = AS-Interface
21D Allfluid pressure switch, electromechanically actuated
D > > 0,... 0, bar (0,... psi), G/, / NPT > > High accuracy > > High number of switching cycles > > Microswitch approved by UL and CSA > > Fixed or adjustable hysteresis > > Shock and vibration tested
red-y smart series product information Thermal Mass Flow Meters and Controllers for Gases
red-y smart series product information Thermal Mass Flow Meters and Controllers for Gases Reliable and accurate: Thermal Mass Flow Meters and Controllers Reliable technology and industry standard interfaces
red-y industrial series product information Thermal Mass Flow Meters and Controllers for Gases with IP67 & Ex Protection
red-y industrial series product information Thermal Mass Flow Meters and Controllers for Gases with IP67 & Ex Protection High accuracy for heavy duties: Mass Flow Meters & Controllers with IP67 & Ex Protection