Operating pressure (bar) kv factor (m 3 /h) *3)
|
|
- Marilynn Fowler
- 5 years ago
- Views:
Transcription
1 / way poppet valves (stainless steel) electromagnetic actuated, directly controlled G /8, G /4 or /4 NPT Working from 0 bar up Assembled free of oil and grease Suited for fine vacuum down to, mbar For a.c. solenoid systems with integrated rectifier ( Hz) These solenoid valves are applicable in Ex protection class ATEX (categories II GD and II 3 GD) and other international approvals Approval depends on magnetic system, see pages to 5! Technical features Medium: For aggressive, gaseous and liquid fluids (with contaminated fluids, upstream installation of a dirt trap is recommended.) Operation: Direct solenoid operated poppet valves Operating pressure: bar Orifice:... 6 mm Port size: G /8, G /4, /4 NPT Mounting position: Optional, preferably with solenoid on top Ambient temperature: C (NBR) Depending on solenoid system Fluid temperature: C (FPM)- Water +95 C C (EPDM) C (PTFE) C (FFPM) Depending on seal materials Air supply must be dry enough to avoid ice formation at temperatures below + C. Materials: Housing: stainless steel.4404 (36 L) Seals: FPM, other see option selector Inner parts: stainless steel Technical data Switching function: Normally closed Symbol Port size Orifice (mm) Operating pressure (bar) min. max. kv factor (m 3 /h) *3) Weight without Solenoid (kg) No. Solenoid group *) G/ , 0,5 3D 9500 G/ , 0,5 3B 9500 G/ ,34 0, 6D 9540 /4 NPT 4 0 0,34 0, 6D G/ ,34 0, 6C 9540 /4 NPT ,34 0, 6C G/ ,5 0, 6D 9560 /4 NPT ,5 0, 6D G/ ,5 0, 6C 9560 /4 NPT ,5 0, 6C *) When ordering please indicate solenoid, voltage and current type (frequency). *) Technical data and ordering information see following pages. *3) Cv (US) ~ kv x, *) Option selector 95X X... Orifice Material seat seal EPDM FPM PTFE 3 FFPM 4 Frequency (Hz) At d.c. 00 At a.c. ( Hz) 50 Voltage 4 V d.c V a.c. 30 Solenoid operators See table 4/ f without notice, the specifications given in this document. 04 Norgren GmbH N/en
2 Solenoids group 3B, standard voltages Power consumption 4 V d.c. 30 V a.c. (W) (VA) Rated current 4 V d.c. 30 V a.c. (m A) (m A) IP-Protection class (to EN 6059) (ATEX-Category) Temperature Ambient/Fluid 8, , ( C) Electrical connection DIN EN , DIN EN , Weight Circuit diagram (kg) Nr. Nr. 0, , ,0 33 II3G 9, 40 II3G 6,9 89 IIG IID 8,7 34 IIG IID Ex td A T 0 C Ex td A T 0 C Ex mb IIC T4 Gb Ex mb IIIC T0 C Db IP 66 Ex mb IIC T4 Gb Ex mb IIIC T0 C Db IP Special connector DIN EN , 0, Special connector 0, DIN EN , Cable 3 m 0, Cable 3 m 0, ,9 6 IIG IID Ex tb IIIC T30 C Db M0 x,5 *6) 0, ,3 3 IIG IID Ex tb IIIC T30 C Db M0 x,5 *6) 0, ,9 6 IIG IID Ex tb IIIC T30 C Db /-4 NPT *6) 0, ,3 3 IIG IID Ex tb IIIC T30 C Db /-4 NPT *6) 0, ,9 6 IIG IID Ex tb IIIC T30 C Db M0 x,5 *6) 0, ,3 3 IIG IID Ex tb IIIC T30 C Db M0 x,5 *6) 0, ,5 8 XP/DIP, Div. & T3 (60 C) 5,9 6 XP/DIP, Div. & T3 (60 C) Datasheet ATEX IECEx FM 09x KEMA 0 ATEX 347 X N/en x, 38x EC-Declaration of Conformity N/en x, 38x CSA-LR N/en xx KEMA 98 ATEX 445 X IECEx KEM X N/en xx PTB 0 ATEX 085 X IECEx PTB.0094X N/en Flying leads Flying leads 0, , Standard voltages (±0%) 4 V d.c., 30 V a.c., other voltages on request. Design according to VDE 0580, EN 5004/ % duty cycle. *6) /cable gland not supplied, see table»accessories«attention: The protection class for coil series 46xx and 48xx is determined by the choice of cable gland. Example: if an ATEX-certified cable gland is used that has Ex d type of protection, the solenoid will have the protection class Ex d mb; if a cable gland with Ex e type of proteciton is used, the solenoid will have protection class Ex e mb. N/en without notice, the specifications given in this document. 04 Norgren GmbH f 4/4
3 Solenoids group 3D, standard voltages Power consumption 4 V d.c. 30 V a.c. (W) (VA) Rated current 4 V d.c. 30 V a.c. (m A) (m A) 6, , ,4 475 IIG IID 5, 66 IIG IID,4 475 IIG IID 5, 66 IIG IID,4 475 IIG IID 5, 66 IIG IID IP-Protection class (to EN 6059) (ATEX-Category) Ex tb IIIC T30 C Db Ex tb IIIC T30 C Db Ex tb IIIC T30 C Db Ex tb IIIC T30 C Db Ex tb IIIC T30 C Db Ex tb IIIC T30 C Db 3,6 567 XP/DIP, Div. & T3 (60 C) 5,7 68 XP/DIP, Div. & T3 (60 C) Temperature Ambient/Fluid Flying leads Flying leads DIN EN , 0, , DIN EN , M0 x,5 *6) 0, M0 x,5 *6) 0,5 6 7 / x 4 NPT *6) 0, / x 4 NPT *6) 0, / x 4 NPT *6) 0, M0 x,5 *6) 0, , , Standard voltages (±0%) 4 V d.c., 30 V a.c., other voltages on request. Design according to VDE 0580, EN 5004/ % duty cycle. *6) /cable gland not supplied, see table»accessories«attention: The protection class for coil series 46xx and 48xx is determined by the choice of cable gland. Example: if an ATEX-certified cable gland is used that has Ex d type of protection, the solenoid will have the protection class Ex d mb; if a cable gland with Ex e type of proteciton is used, the solenoid will have protection class Ex e mb. ( C) Electrical connection Weight (kg) Nr. Circuit diagram Nr. Datasheet ATEX IECEx FM 3x, 38x EC-Declaration of Conformity N/en x, 38x CSA-LR N/en xx KEMA 98 ATEX 445 X IECEx KEM X N/en xx PTB 0 ATEX 085 X IECEx PTB.0094X N/en / f N/en without notice, the specifications given in this document. 04 Norgren GmbH
4 Solenoids group 6C, standard voltages Power consumption 4 V d.c. 30 V a.c. (W) (VA) Rated current 4 V d.c. 30 V a.c. (m A) (m A) IP-Protection class (to EN 6059) (ATEX-Category) Temperature Ambient/Fluid 6, DIN EN , ( C) Electrical connection Weight Circuit diagram (kg) No. No. 0, , DIN EN , 0, ,6 46 II3G Ex td A T 0 C T4: Special connector DIN EN , ,9 369 IIG IID Ex tb IIIC T30 C Db T T M0 x,5 *6) 0, ,0 IIG IID Ex tb IIIC T30 C Db T T M0 x,5 *6) 0, ,9 369 IIG IID Ex tb IIIC T30 C Db T T / - 4 NPT *6) 0, ,0 IIG IID Ex tb IIIC T30 C Db T T / - 4 NPT *6) 0, ,9 369 IIG IID Ex tb IIIC T30 C Db T T M0 x,5 *6) 0, ,0 IIG IID Ex tb IIIC T30 C Db T T M0 x,5 *6) 0, ,9 369 XP/DIP, Div. & T3 (60 C) 9,5 4 XP/DIP, Div. & T3 (60 C) Flying leads Flying leads 0, , Standard voltages (±0%) 4 V d.c., 30 V a.c., other voltages on request. Design according to VDE 0580, EN 5004/ % duty cycle. *6) /cable gland not supplied, see table»accessories«attention: The protection class for coil series 46xx and 48xx is determined by the choice of cable gland. Example: if an ATEX-certified cable gland is used that has Ex d type of protection, the solenoid will have the protection class Ex d mb; if a cable gland with Ex e type of proteciton is used, the solenoid will have protection class Ex e mb. Datasheet ATEX IECEx FM 37x, 38x CSA-LR N/en xx KEMA 98 ATEX 445 X IECEx KEM X N/en xx PTB 0 ATEX 085 X IECEx PTB.0094X N/en N/en without notice, the specifications given in this document. 04 Norgren GmbH f 4/4
5 Solenoids group 6D, standard voltages Power consumption 4 V d.c. 30 V a.c. (W) (VA) Rated current 4 V d.c. 30 V a.c. (m A) (m A) IP-Protection class (to EN 6059) (ATEX-Category) Temperature Ambient/Fluid 6, , ( C) Electrical connection DIN EN DIN EN Weight Circuit diagram (kg) Nr. Nr. 0, , ,9 703 II3G 9,5 75 II3G,4 475 IIG IID 5, 66 IIG IID,4 475 IIG IID Ex td A T 30 C Ex td A T 30 C Ex tb IIIC T30 C Db Ex tb IIIC T30 C Db Ex tb IIIC T30 C Db Special connector DIN EN , 0, Special connector 0, DIN EN , M0 x,5 *6) 0, M0 x,5 *6) 0, / x 4 NPT *6) 0, , 66 IIG IID Ex tb IIIC T30 C Db / x 4 NPT *6) 0, ,4 475 IIG IID Ex tb IIIC T30 C Db M0 x,5 *6) 0, , 66 IIG IID Ex tb IIIC T30 C Db M0 x,5 *6) 0, ,6 567 XP/DIP, Div. & T3 (60 C) 5,7 68 XP/DIP, Div. & T3 (60 C) Datasheet ATEX IECEx FM 37x, 38x CSA-LR N/en xx KEMA 98 ATEX 445 X IECEx KEM X N/en xx PTB 0 ATEX 085 X IECEx PTB.0094X N/en Flying leads Flying leads 0, , Standard voltages (±0%) 4 V d.c., 30 V a.c., other voltages on request. Design according to VDE 0580, EN 5004/ % duty cycle. *6) /cable gland not supplied, see table»accessories«attention: The protection class for coil series 46xx and 48xx is determined by the choice of cable gland. Example: if an ATEX-certified cable gland is used that has Ex d type of protection, the solenoid will have the protection class Ex d mb; if a cable gland with Ex e type of proteciton is used, the solenoid will have protection class Ex e mb. 4/ f N/en without notice, the specifications given in this document. 04 Norgren GmbH
6 Accessories Cable gland Protection class Ex e, Ex d (ATEX), Page 98Thread Cable Ø Material Protection class (ATEX) M 0x,5 5,0...8,0 mm Nickel plated brass IIGD Ex e M 0x, mm Nickel plated brass IIGD Ex d /-4-NPT 7,5...,9 mm Nickel plated brass IIGD Ex d s Valves 66, ,5 ~ 8, Ports G/8 or /8 NPT M4 x 6 mm deep 3 Ports G/4 or /4 NPT N/en without notice, the specifications given in this document. 04 Norgren GmbH f 4/4
7 s Solenoid operators ,5 4,5 5,5 M6 X,5 8 9,5 7 M6 X, ,5 96,5 53, , M6 X, M6 x, ,5 64, ± 0, 4 9,5 63, ,5 can be indexed by 4x90 Ø 6 or 3 (with spacer tube) 3 M0 x,5 or / - 4 NPT 4/ f N/en without notice, the specifications given in this document. 04 Norgren GmbH
8 7 8 70,5 4,5 / - 4 NPT , , Ø 6 or 3 (with spacer tube) 3 M0 x,5 or / - 4 NPT 4 Flying leads AWG 8 ( long) Circuit diagrams T T Cable gland C B A D C B A D A B C ø D M0 x, M0 x, /-4 NPT ,5..., only Warning These products are intended for use in industrial compressed air and fluid systems only. Do not use these products where pressures and temperatures can exceed those listed under»technical features«. Before using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applications not within published specifications, consult NORGREN. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. N/en without notice, the specifications given in this document. 04 Norgren GmbH f 4/4
Flow. Flow. N/en
/ poppet valves electromagnetic actuated, directly controlled G /4 or /4 NPT Working from 0 bar up Short switching times Suited for fine vacuum down to, 0 - mbar For a.c. solenoid systems with integrated
More information95100, 2/2 (stainless steel) Direct solenoid actuated poppet valves
9500, / (stainless steel) > > Port size: G/8, G/4, /4 NPT > > Working from 0 bar up > > Assembled free of oil and grease > > Suited for fine vacuum down to,33 0 - mbar > > For a.c. solenoid systems with
More informationSeries 95000, 2/2 Direct solenoid actuated poppet valve
> Port size: /4 (ISO G or NPT), G/ > Working from 0 bar up > Short switching times > Suited for fine vacuum down to,33 x 0 - mbar > For a.c. solenoid systems with integrated rectifier (40... 60 Hz) > Variable
More informationOperating pressure. N/en/en
660, 8007 NAMUR /, / & / way spool valves electromagnetic actuated, indirectly controlled G / and NAMUR interface For single and double operated actuators Manual override with and without detent Simple
More information21023, 21025, 2/2 Direct solenoid actuated poppet valves
03, 05, / > > Port size: G/4, G/ > > Working from 0 bar up > > Suitable for mediumhigh vacuum down to.33 0 - mbar l/s > > Compact design > > Valves and solenoids are ATEX approved. Additional international
More information80265 series, 3/2 Indirect solenoid actuated poppet valve
> > Port size: G/... G > > High flow rate > > Optionally air pilot operated > > High repeatability of switching time > > Variable valve solenoid combination Technical features Medium: Compressed air, filtered,
More information97105 Inline 3/2, 5/2 & 5/3 way spool valves electromagnetic actuated, indirectly controlled G1/4, 1/4 NPT, G1/2, 1/2 NPT
70 Inline 3/, / & /3 way spool valves electromagnetic actuated, indirectly controlled G/, / NPT, G/, / NPT Main application: single and double operated actuators TÜV-approval based on type examination
More informationOperating pressure (bar)
/ poppet valves electromagnetic actuated, directly controlled G /4, /4 NPT, G /, / NPT or flanged with NAMUR Interface Main application: single operated actuators for plants Valves for safety systems up
More informationOperating pressure. N/en/en
660, 8007 NAMUR /, / & / spool valves electromagnetic actuated, indirectly controlled G / and NAMUR interface For single and double operated actuators Manual override with and without detent Simple design
More informationMaterial Seat seal. N/en
0 / poppet valves electromagnetic actuated, directly controlled G /, / NPT or flanged with NAMUR interface TÜV-approval based on IEC 6 8 Valves for safety systems up to SIL Standard NAMUR type - redundancy:
More information97105 Inline 3/2, 5/2 & 5/3 spool valves electromagnetic actuated, indirectly controlled G 1/4, 1/4 NPT, G 1/2, 1/2 NPT
705 Inline 3/, 5/ & 5/3 spool valves electromagnetic actuated, indirectly controlled G /, / NPT, G /, / NPT For single and double operated actuators Valves for safety systems up to SIL (IEC 6508) Crossover-free
More informationTechnical features. 12/ f. N/en
/, / & / way spool valves electromagnetic actuated, indirectly controlled G /, / NPT, G /, / NPT or flanged with NAMUR interface Main application: single and double operated actuators TÜV-approval based
More information3/2 Directional control valves Direct solenoid operated poppet valves Internal thread G 1/2, 1/2 NPT or flanged with NAMUR interface
9805 / Directional control valves Direct solenoid operated poppet valves Internal thread G /, / NPT or flanged with NAMUR interface Main application: single operated actuators for plants TÜV-approval based
More informationTechnical features. N/en
/, 5/ & 5/ spool valves electromagnetic actuated, indirectly controlled G /, / NPT, G /, / NPT or flanged with NAMUR interface For single and double operated actuators Exhaust air recirculation at way
More informationVALVES Inline 3/2-, 5/2- & 5/3 Spool valves electromagnetic actuated, indirectly controlled G 1/4, 1/4 NPT, G 1/2, 1/2 NPT
975 Inline 3/-, 5/- & 5/3 Spool valves electromagnetic actuated, indirectly controlled G /, / NPT, G /, / NPT For single and double operated actuators Closed crossover design Add-on manual override Rectified
More information24011 series, 3/2 Direct solenoid actuated poppet valve
0 series, / > Port size: / (ISO G or NPT), NAMUR Interface > Add-on manual override or inductive limit switches on request > Main application: Single and double acting actuators > TÜV-approval based on
More information/2 way indirect solenoid operated valves G 1/2, 1/2 NPT or flanged with NAMUR Interface
9805 / way indirect solenoid operated valves G /, / NPT or flanged with NMUR Interface Main application: single operated actuators for plants Valves for safety systems up to SIL (IE 6508) dd-on manual
More information26360, Inline. Technical data. Ordering information See page 2. For connector plugs see page 2 and data sheets N/en /2 5/2.
66, 87 Inline / and 5/ directional control valves NG 6 and Operation: elektromagnetic Indirectly controlled soft seal spool valves Port size: G /4 and G / For single and double operated actuators Manual
More informationG 1/2 30,5 A Brass NBR 0,8 3,
4/2 way poppet valves electromagnetic actuated, directly controlled /4 & /2 Working from 0 bar up Suitable for vacuum range down.33 0-2 mbar l/s Protection class : IP 65, Ex em, Ex d TEX approved (see
More information98025 NAMUR 3/2 poppet valves electromagnetic actuated, indirectly controlled G 1/2, 1/2 NPT or flanged with NAMUR Interface
9805 NMUR / poppet valves electromagnetic actuated, indirectly controlled G /, / NPT or flanged with NMUR Interface Main application: single operated actuators for plants Valves for safety systems up to
More information97105 NAMUR, 3/2, 5/2 & 5/3 Indirect electromagnetic actuated spool valves
970 NAMUR, /, / & / > > Port size: / or / ISO G/NPT > > Main application: single and double operated actuators > > TÜV-approval based on type examination DIN EN, DIN 9 and IEC 08 > > Valves for safety
More informationMaterial pressure (bar) (Cv (US) kv x 1,2 Seat
00 / poppet valves electromagnetic actuated, directly controlled G /, / NPT or flanged with NAMUR Interface TÜV-approval based on IEC 6 08, DIN V Valves for safety systems up to SIL Solenoid valve also
More information26360, NAMUR. Technical data
66, 87 NAMUR /-, /- and / directional control valves Operation: elektromagnetic Indirectly controlled soft seal spool valves Port size: G/ NAMUR-Interface For single and double operated actuators Manual
More informationFlow. (l/min) (ms) N/en
66, 87 Inline / & / spool valves electromagnetic actuated, indirectly controlled G / & G / For single and double operated actuators Manual override with and without detent imple design of soft seal spool
More information97100 NAMUR series, 3/2 & 5/2 Indirect solenoid actuated spool valve
9700 NAMUR series, / & / > > Port size: /4 (ISO G or NPT), NAMUR Interface > > Crossover-free switching > > Main application: Single and double acting actuators > > / way valve usable as / way valve >
More information26360, 80207, 3/2, 5/2 & 5/3 Indirect solenoid actuated spool valves
66, 87, /, 5/ & 5/ > > Port size: G/ & G/ > > Compact design > > Easily interchangeable solenoid > > tandard manual override > > ll valves available with Ex protected coils (TEX or other international
More information6215L Inline & NAMUR series, 3/2 & 5/2 Indirect solenoid actuated spool valve
L Inline & NMUR series, / & / > Port size: / (ISO /NPT) or flanged with NMUR interface > Suited for outdoor use under critical environment conditions (see solenoid list) > Variable valve solenoid combination
More information97105 NAMUR. Technical data. Ordering information and accessories See page 6 and 7
90 NAMUR /, / and / directional valves Actuation: electromagnetic Indirectly controlled soft seal spool valves Port size: G /, / NPT, G /, / NPT NAMUR-interface For single and double operated actuators
More information3/2 Directional control valves Indirect controlled solenoid operated poppet valves Internal thread G1/2, 1/2 NPT or flanged with NAMUR interface
9805 / Directional control valves Indirect controlled solenoid operated poppet valves Internal thread G/, / NPT or flanged with NMUR interface Main application: single operated process actuators TÜV-approval
More informationV87 series - Redundant valve manifold systems - Semi modular 1oo2 Safety, 2oo2 Availability and 2oo3 Safety and Availability
V87 series - Redundant valve manifold systems - Semi modular oo Safety, oo Availability and oo Safety and Availability > > Semi modular design - Herion valves > > Stainless steel visual status indicators
More information98015 series, 3/2 Direct solenoid actuated poppet valve
90 series, / > Port size: / & / (ISO G/NPT), NAMUR Interface > Main application: Single acting actuators > TÜV-approval based on type eamination DGRL 9//EG and IE 0, multichannel up to SIL > Optional add-on
More informationV88 series Redundant valve manifold systems - Semi modular 2oo2 Availability
oo Availability > > Semi modular design - Maxseal valves > > Stainless steel visual indicators and exhaust guards as standard > > able terminations inside coil housing > > International approvals > > Stainless
More informationV88 series Redundant valve manifold systems - Semi modular 1oo2 Safety, 2oo2 Availability and 2oo3 Safety and Availability
oo Safety, oo Availability and oo Safety and Availability > > Semi modular design - Maxseal valves > > Stainless steel visual indicators and exhaust guards as standard > > able terminations inside coil
More informationICO3S - 2/2, 3/2 or 5/2 poppet valves Electromagnetically actuated, direct solenoid operated
ICOS - /, / or / poppet valves > > Port size: /... / (ISO G / NPT) Namur or manifold > > Control of pneumatic or hydraulic operated equipment > > Direct acting solenoid valve > > High flow > > bar inlet
More information21D Allfluid pressure switch, electromechanically actuated
D > > 0,... 0, bar (0,... psi), G/, / NPT > > High accuracy > > High number of switching cycles > > Microswitch approved by UL and CSA > > Fixed or adjustable hysteresis > > Shock and vibration tested
More informationHERION SERIES Indirect solenoid actuated spool valves
HERION SERIES Indirect solenoid actuated spool valves for single and double acting actuators with NAMUR interface /2, /2, /, NC/APB, G/, G/2 Valves for safety systems up to SIL (IEC 08) Crossover-free
More informationSCVA08, SCVA10, SCVA20 & SCVA32, 3/2 Solenoid actuated safety valve
SCV0, SCV0, SCV & SCV, / > > Port size: /4, /, /4 and (ISO G, NPT) > > Range of sizes - DN, 0, and > > Redundant valve assembly, pneumatic self monitoring with integrated safety silencer > > Ensures safe
More informationICO4S 2/2, 3/2 or 5/2 poppet valves electromagnetic actuated, directly controlled
ICO4S /, / or 5/ poppet valves > > Port size: /4... /4 (ISO G/NPT) or manifold version > > Reliable and long life, ideal for a one time installation > > Direct acting solenoid valve for the control of
More informationPneumatic Control/Feedback
897 /Feedback Type 897 can be combined with... Compact design Integrated pilot valve with manual override Internal control air routing Bright LED position indicator Automatic end position adjustment Type
More informationPneumatic Control/Feedback
897 /Feedback Type 897 can be combined with... Compact design Integrated pilot valve with manual override Internal control air routing Automatic end position adjustment With ATEX II cat. G/D and cat. D/G
More informationSPCH/ Big bottle blowing block
> > Blowing block for linear and rotating blow moulding machines > > Digital position indicator - counter with four decade from 000.0 to 00.0 > > Best suited for PET bottles from 5 up to 30 litres (up
More information97105 Inline, 3/2 & 5/2 Direct pneumatically actuated spool valves
9705 Inline, 3/ & 5/ > > : /... / (ISO G/NPT) > > Main application: single and double operated actuators > > Valves for safety systems multi-channel up to SIL 3 > > Crossover-free switching > > TÜV-approval
More informationV03, V04 and V05 Series
V03, V04 and V05 Series / and 3/ Poppet Valves Electrically Actuated G 1 8, G 1 4, CNOMO and Interface Extensive range of power and orifice size options Removable coil Manifold rail for 1 to 0 valves Operating
More informationPneumatic Control/Feedback
897 /Feedback Type 897 can be combined with... Compact design Integrated pilot valve with manual override Internal control air routing Bright LED position indicator Automatic end position adjustment Type
More information60 series, 2/2 or 3/2 Ball valve
>> Port size: Rp/..., /... >> Ideally suited for most general purpose applications >> Easy installation, simple operation and maintenance free >> -way ball valves with actuator interface conforming to
More information26230, Inline 3/2, 5/2 and 5/3 way soft seal spool valves electromagnetic actuated, indirectly controlled G 1/4, G 1/2
/, / and / way soft seal spool valves electromagnetic actuated, indirectly controlled /, / traight-through flow, high v-factor tandard manual override ompact design asily interchangeable solenoid system
More informationISO*STAR (SXE, SXP) 5/2 & 5/3 Solenoid and pilot actuated glandless spool valves
*STR (SX, SXP) / & / > > Sub-base mounted, 99- s, or > > Specially coated glandless spool and sleeve for long trouble-free life > > Integral flow regulators available on and s for cylinder speed control
More informationStandardized valve series MI-01 Connection pattern according to ISO 5599/1, size 1, 5/2- and 5/3-way NG and 1700 Nl/min (1.636 and 1.
Standardized valve series MI-01 Connection pattern according to ISO 5599/1, size 1, 5/2- and 5/3-way NG 9 1610 and 1700 Nl/min (1.636 and 1.728 Cv) Order code Series and function 1) Plug socket see page
More informationISO*STAR - ATEX version (SXE, SXP) 5/2 & 5/3 Solenoid and pilot actuated glandless spool valves
*STR - TX version (SX, SXP) / & / > > Sub-base mounted, 99- s, or > > Specially coated glandless spool and sleeve for long trouble-free life > > Integral flow regulators available on and s for cylinder
More information97105 Inline direct pneumatically actuated 3/2 and 5/2 spool valves G 1/4.G1/2, 1/4 NPT 1/2 NPT
direct pneumatically actuated 3/ and 5/ spool valves G /.G/, / NPT / NPT For single and double operated actuators Valves for safety systems up to SIL () Crossover-free switching, switch-over function guaranteed
More informationBSP & HOSE Fittings M5, 1/8... 1
SP & HOS Fittings M5, 1/8... 1 Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All taper threads pre-coated with non-ptf based sealant Straight Adaptors
More informationPneumatic Control Unit for the integrated mounting on process valves
Pneumatic Control Unit for the integrated mounting on process valves Type 890 can be combined with Compact design Pilot valve with high air flow rate Internal control air channel Optical position indicator
More informationControl Head for the integrated mounting on process valves
Control Head for the integrated mounting on process valves Type can be combined with Compact stainless steel design Integrated analogue valve position registration (Teach function) Coloured illuminated
More informationM/60100/M, Slide units Magnet piston, double acting
M/000/M, Slide units > > Ø 0... 0 mm > > High quality sliding bearings ensure long durable life and high guidance performance > > Easy to install-reduces costly design time > > Double piston rod provides
More informationLB74G - EXCELON Modular System General purpose filter/regulator
LBG - EXCELON Modular System > Port size: /... / (ISO G/PFT) > Push to lock adjusting knob with optional tamper resistant accessory > Excelon design allows in-line installation or modular installation
More information15 and 16 Series BSP and hose fittings
SP and hose fittings > > Port size: M5, 1/8... 1 > > xtensive range of shapes and sizes including manifolds > > High temperature and pressure copper sealing washers supplied with ISO threads Technical
More informationRM/28000/M, ISO cylinder Magnetic piston, single acting
> > Ø 0... 5 mm > > Standard magnetic piston for full control system versatility > > Nose mounting nut and piston rod locknut as standard > > Conforming to ISO > > Optional port arrangement for compact
More informationDigital electropneumatic Positioner for the integrated mounting on process control valves
Digital electropneumatic Positioner for the integrated mounting on process s Type 8694 can be combined with Automatic teach function Contact-free position sensor Compact stainless steel design AS-Interface
More information10 series (Pneufit) Push-in fittings Ø mm O/D tube, BSP threads
0 series (Pneufit) Push-in fittings Ø 4... 4 mm O/D tube, SP threads Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All SP taper threads pre-coated
More informationPNEUFIT 10 series Push-in fittings
PNUFIT 0 series > > Port size: Ø 4... 4 mm O/D tube, SP threads > > Very compact units > > asy tube insertion for rapid assembly of pneumatic circuits > > Straight adaptors feature internal hexagon for
More informationControl Head for the integrated mounting on process valves
Control Head for the integrated mounting on process valves Type 8695 can be combined with Compact stainless steel design Integrated analog valve position registration (Teach function) Coloured illuminated
More informationR./57100/M, R./57300/M, Roundline cylinder Magnetic piston, single acting
R./700/M, R./700/M, Roundline cylinder > >... 0 mm > > Saves 0% space over the basic length of a corresponding ISO/ VDM cylinder > > Standard magnetic piston for full control system versatility > > Low
More informationDigital electropneumatic Positioner for the integrated mounting on process control valves
Digital electropneumatic Positioner for the integrated mounting on process control valves Type 8696 can be combined with Digital smart positioner Automatic teach function Contact-free position sensor Compact
More informationControl Head for the integrated mounting on process valves
Control Head for the integrated mounting on process valves Type 8691 can be combined with Compact stainless steel design Integrated analogue valve position registration (Teach function) Coloured illuminated
More informationApplication The DA03 serves as indicator of differential. Follow mounting instructions in accordance to application.
DA03 Differential Pressure Gauge / Differential Pressure Gauge and Switch Models for Assignment in Explosion-hazardous Areas per Directive 94/9/EC (ATEX) Application The DA03 serves as indicator of differential
More informationOld documentation - Only for your information! Product is not available anymore!
Double solenoid valve Control and safety combination valve Servo pressure controller - / 7. Printed in Germany Rösler Druck Edition 0.08 Nr. 09 8 Technical description The DUNGS multiple actuator DMV-SE...
More informationPTB 01 ATEX Example / Beispiel / Exemple. Type Operating Instructions
Device with II 2G EX i approval Geräte mit II 2G EX i Zulassung Appareils avec mode de protection II 2G EX i Example / Beispiel / Exemple Type 6106 Operating Instructions Bedienungsanleitung Manuel d utilisation
More informationSeries 3730 Type Electropneumatic Positioner
Series 3730 Type 3730-0 Electropneumatic Positioner Application Single-acting or double-acting positioner for attachment to pneumatic control valves Set point Travel 4 to 20 ma 5.3 to 200 mm The positioner
More informationDigital electropneumatic Positioner for the integrated mounting on process control valves
Digital electropneumatic Positioner for the integrated mounting on process control valves Type 8692 can be combined with Compact stainless steel design Graphic display with backlight Easy start-up Comprehensive
More informationElectropneumatic miniature control valves Mounting Connectors Minisolenoid valves Indicators LED seals LED Valve modules Poppet 3/2 single pilot 4/2 s
ElectroPneumatic Miniature Control Valves Order/Technical Support Tel: (800) 6773 / FAX: (800) 677386 / www.crouzetusa.com /47 Electropneumatic miniature control valves Mounting Connectors Minisolenoid
More informationB64G - Olympian Plus plug-in system Filter/regulator
BG - Olympian Plus plug-in system > > Port size: /... / (ISO G/PTF) > > High efficiency water removal > > Diaphragm and balanced valve design ensure good regulation characteristics > > on-rising adjusting
More information10 series (Pneufit) Push-in fittings Ø mm tube size, BSP threads
0 series (Pneufit) Push-in fittings Ø 4... 4 mm tube size, SP threads Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All SP taper threads pre-coated
More informationLMP 308. Separable Stainless Steel Probe. Stainless Steel Sensor. accuracy according to IEC 60770: standard: 0.35 % FSO option: 0.25 % FSO / 0.
LMP 08 Separable Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.25 % FSO / 0. % FSO Nominal pressure from 0... mh 2 O up to 0... 250 mh 2 O Output signals 2-wire:
More informationDigital electropneumatic Positioner for the integrated mounting on process control valves
Digital electropneumatic Positioner for the integd mounting on process control valves Type 8692 can be combined with Compact stainless steel design Graphic display with backlight Easy start-up by automatic
More informationDigital electropneumatic Positioner for the integrated mounting on process control valves
Digital electropneumatic Positioner for the integrated mounting on process s Type 8694 can be combined with Digital smart positioner Automatic teach function Contact-free position sensor Compact stainless
More informationSeries 3730 Type Electropneumatic Positioner
Series 3730 Type 3730- Electropneumatic Positioner Application Single-acting or double-acting positioner for attachment to pneumatic control valves. Self-calibrating, automatic adaptation to valve and
More informationTechnical Information Promonitor NRF560
TI00462G/08/EN/03.14 71264171 Products Solutions Services Technical Information For tank side monitor and control of Proservo NMS5 intelligent tank gauge Application is a monitoring unit for use with Proservo
More informationRM/92000/M, Short stroke cylinder Magnetic piston, double acting
> Ø... 00 mm > One third the basic length of a corresponding ISO/VDM model > Fully non-corrodible specification > Standard magnetic piston for full control system versatility > Low friction, long life
More informationTHERMASGARD TM 65. Immersion screw-in duct temperature measuring transducer, calibratable, with multi-range switching and active output TECHNICAL DATA
Patented quality product (Immersion sensor patent no. DE 10 2012 017 500.0) Calibratable temperature measuring transducer THERMASGARD with eight switchable measuring ranges, continuous linear output, enclosure
More informationInductive sensor BI1.5-EG08-Y1-H1341
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
More informationBVS 17 ATEX E 117 X / IECEx BVS X Types 3320, 3321, 3323, 3360, 3361, 3363 AE3320, AE3321, AE3323, AE3360, AE3361, AE3363
BVS 17 ATEX E 117 X / IECEx BVS 17.0100X Types 3320, 3321, 3323, 3360, 3361, 3363 AE3320, AE3321, AE3323, AE3360, AE3361, AE3363 Electromotive control valve with ATEX approval and IECEx approval Elektromotorisches
More informationCable Glands 757, BVE and 737 Series: Blanking Plugs, Adaptors and Reducers Increased Safety and Flameproof
757 Series Blanking Plugs 737 Series Adaptors and Reducers BVE Series Plastic Blanking Plugs & Sealing Washers Compliance Data: 757 Series Blanking Plugs: ATEX IECEx CE Ex d IIC or Ex e II Ex td A21 IP
More informationInductive sensor NI3-EG08K-Y1-H1341
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Threaded barrel, M8 x 1 Stainless steel, 1.4427 SO DC 2-wire, nom. 8.2 VDC Output acc. to DIN EN 60947-5-6 (NA- MUR)
More informationTechnical Data. General specifications. Rated operating distance s n 3 mm
0102 Model Number Features Direct mounting on standard actuators Compact and stable housing with terminal compartment connection ATEX & IECEX certifications Usable up to SIL 2 acc. to IEC 61508 Weatherproof
More informationInductive dual sensor For rotary actuators NI4-DSU35TC-2Y1X2/S933
ATEX category II 2 G, Ex zone 1 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Rectangular, housing DSU35 Plastic, PP-GF30-VO Two outputs for monitoring the position of rotary actuators Mounting
More informationBVS 17 ATEX E 117 X / IECEx BVS X Types 3320, 3321, 3323, 3360, 3361, 3363 AE3320, AE3321, AE3323, AE3360, AE3361, AE3363
BVS 17 ATEX E 117 X / IECEx BVS 17.0100X Types 3320, 3321, 3323, 3360, 3361, 3363 AE3320, AE3321, AE3323, AE3360, AE3361, AE3363 Electromotive control valve with ATEX approval and IECEx approval Elektromotorisches
More informationElectro-pneumatic control valves
Electropneumatic control valves 7 Miniature solenoid valves for alternating current Conform to the Low Voltage Directive or mounting on subbase or footprint in accordance with CNOMO recoendation E06620N
More informationLMP 308i. Separable Stainless Steel Probe Precision. Stainless Steel Sensor. accuracy according to IEC 60770: 0.1 % FSO.
LMP 08i Separable Stainless Steel Probe Precision Stainless Steel Sensor accuracy according to IEC 60770: 0. % FSO Nominal pressure from 0... mh O up to 0... 00 mh O Output signals wire:... 0 ma wire:
More informationSolConeX Wall-Mounted Socket, 16 A
SolConeX Wall-Mounted Socket, 16 A Operating instructions Additional languages www.stahl-ex.com General Information Contents 1 General Information...2 1.1 Manufacturer...2 1.2 Information Regarding the
More informationInductive sensor For rotary actuators NI4-DSU35TC-2Y1X2/S933
ATEX category II 2 G, Ex zone 1 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
More informationJUMO MIDAS C08. OEM Pressure Transmitter Basic. Applications. Brief description. Special features. Customer benefits
sales@jumo.co.uk info.us@jumo.net Page /0 JUMO MIDAS C08 OEM Pressure Transmitter Basic Applications compressors machinery and plant engineering industrial pneumatics commercial vehicles building technology
More informationGeneral Specifications
General Specifications Model RAGH Rotameter This type of Rotameter is designed for measurement of liquids and gases. The conical glass metering tube has a free rotating float. The mounting position is
More informationTerminal Boxes Series 8118
> Enclosure made of glass fibre reinforced polyester resin > sizes available > Terminals and cable glands fitted to order > Enclosure design with integrated metal bracket for metal cable glands. > Degree
More informationTubular Light Fitting with LED Series 6036
> Extremely robust luminaire design for rough ambient conditions > Very lightweight and vibration resistant LED light fitting > Extremely long service life due to LED used > High power LEDs including driver
More informationDMP 333 DMP 333. Industrial Pressure Transmitter For High Pressure. Stainless Steel Sensor. Pressure Transmitter. Industrial
DMP Industrial Pressure Transmitter For High Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO Industrial Pressure Transmitter DMP Nominal pressure
More informationInductive sensor BI1.5-EG08-Y1-H1341
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
More informationT EN TROVIS Electropneumatic Positioner
T 8484-1 EN TROVIS 3730-1 Electropneumatic Positioner Application Single-acting positioner for attachment to pneumatic globe and rotary valves. Self-calibrating, automatic adaptation to valve and actuator.
More informationLoad Disconnect Switches and Motor Switches
Load Disconnect Switches and Motor Switches 594 Load Disconnect Switches and Motor Switches Contents Load Disconnect Switches and Motor Switches Safety Switches made of Resin 10, 12/16, 16, 20, 25, 40,
More informationInductive sensor Dual sensors with extended temperature range NI4-DSU35TC-2Y1X2/S97
ATEX category II 2 G, Ex zone 1 ATEX category II 1 D, Ex-zone 20 for temperatures up to -25 C SIL2 acc. to IEC 61508 Rectangular, housing DSU35 Plastic, PP-GF30-VO Two outputs for monitoring the position
More informationSeries 3730 Electropneumatic Positioner Type
Series 3730 Electropneumatic Positioner Type 3730-0 Application Single-acting or double-acting positioner for attachment to pneumatic control valves Reference variable Travels 4 to 20 ma 5.3 to 200 mm
More information