Rodless cylinders Bellow actuator Rolling bellow, series BRB. Brochure
|
|
- Edward McDaniel
- 5 years ago
- Views:
Transcription
1 Rolling bellow, series R rochure
2 2 osch Rexroth Pneumatics Rolling bellow, series R 3 Part numbers marked in bold are available from the central warehouse in ermany, see the shopping basket for more detailed information Pneumatics catalog, online P, as of , osch Rexroth, subject to change
3 osch Rexroth Pneumatics 3 Version unctional principle Working pressure min./max. mbient temperature min./max. edium temperature edium Pressure for determining forces lexible rolling bellow Single-acting, retracted without pressure See table below -30 / / +90 ompressed air 6 bar aterials: ellow ront cover nd cover Piston hloroprene rubber Polyamide, fiber-glass reinforced Polyamide, fiber-glass reinforced Polyamide, fiber-glass reinforced a23 Technical Remarks ompliance with the min. height Hmin. () and max. stroke () must be ensured with end stops. Use at operating height Hmax: only permitted upon approval by osch Rexroth or information on vibration insulators, see Technical Information Rolling bellows cylinders may only be moved or pushed together under pressure; otherwise this can damage the bellows. reduced service life at a temperature greater than: 70 ompressed air Stroke over diameter in. installation space Working pressure min./max. aterial lamping ring Weight [kg] 1/ luminum / Steel / Steel / Steel / Steel / Steel / Steel / Steel orce min./max. ig. Note [kn] ig ig ig ig. 2 1) ig. 2 1) ig. 2 1) ig. 2 1) ig. 2 1) 1) delivery with lock nut 30x1.5 Part numbers marked in bold are available from the central warehouse in ermany, see the shopping basket for more detailed information Pneumatics catalog, online P, as of , osch Rexroth, subject to change
4 4 osch Rexroth Pneumatics ig. 1 I ompressed air I Ø Return force, min. [N] / ig. 2 Ø J H Part numbers marked in bold are available from the central warehouse in ermany, see the shopping basket for more detailed information Pneumatics catalog, online P, as of , osch Rexroth, subject to change
5 osch Rexroth Pneumatics 5 ompressed air / x1, / x1, / x1, / x1, / x1, Return force, min. [N] H J min Ø ig. 3 Ø Ø ompressed air Ø Return force, min. [N] / Part numbers marked in bold are available from the central warehouse in ermany, see the shopping basket for more detailed information Pneumatics catalog, online P, as of , osch Rexroth, subject to change
6 6 osch Rexroth Pneumatics ig. 4 Ø Ø ompressed air Ø Ø Return force, min. [N] / force-displacement diagram, force-displacement diagram, Part numbers marked in bold are available from the central warehouse in ermany, see the shopping basket for more detailed information Pneumatics catalog, online P, as of , osch Rexroth, subject to change
7 osch Rexroth Pneumatics 7 force-displacement diagram, force-displacement diagram, force-displacement diagram, force-displacement diagram, V [I] [kn] 2,0 10 H** H* 1,8 9 1,6 8 8 bar 1,4 V* 7 7 bar 1,2 6 6 bar 1,0 5 5 bar 0,8 4 4 bar 0,6 3 3 bar 0,4 2 2 bar 0,2 1 bar 1 0, H max =200 H H min = _a Part numbers marked in bold are available from the central warehouse in ermany, see the shopping basket for more detailed information Pneumatics catalog, online P, as of , osch Rexroth, subject to change
8 8 osch Rexroth Pneumatics force-displacement diagram, force-displacement diagram, V [I] [kn] 1,6 4,0 H** H* 1,4 V* 3,5 8 bar 1,2 3,0 7 bar 1,0 2,5 0,8 0,6 6 bar 5 bar 4 bar 2,0 1,5 0,4 3 bar 1,0 0,2 2 bar 0,5 1 bar 0,0 0, H max =200 H H min = _a Part numbers marked in bold are available from the central warehouse in ermany, see the shopping basket for more detailed information Pneumatics catalog, online P, as of , osch Rexroth, subject to change
9 osch Rexroth Pneumatics Ulmer Straße aatzen Phone ax Your contact: anada osch Rexroth anada orp ainway rive urlington, Ontario 7 18 Tel ax ustralia osch Rexroth Pty. td. 3 Valediction Road ings Park NSW 2148 Sydney Tel ax U.S.. osch Rexroth orp ercer Road exington, Y entucky Tel ax reat ritain osch Rexroth td. roadway ane South erney irencester, 7 5UH loucestershire Tel ax further contacts: The data specifi ed above only serve to describe the product. No statements concerning a certain condition or suitability for a certain application can be derived from our information. The information given does not release the user from the obligation of own judgment and verifi cation. It must be remembered that our products are subject to a natural process of wear and aging. This document, as well as the data, specifi cations and other informations set forth in it, are the exclusive property of osch Rexroth. Without their consent it may not be reproduced or given to third parties. Subject to modifi cations. Online-P
Rexroth AV03 Valve System New Generation, New Geometry, New Technology
Rexroth AV0 Valve System New Generation, New Geometry, New Technology 2 Rexroth AV0 valve system Ingenious A valve system with an innovative design The research and development experts at Bosch Rexroth
More informationClamping Device, Series 2709
Electric Drives and Controls Hydralics Linear Motion and Assembly Technologies Pneumatics Service Clamping Device, Series 2709 Technical data Pneumatic Open mechanism Technical Data Type Power transmission
More informationPiston rod cylinder Guide cylinders Series MSN. Brochure
Brochure 2 ini slide, narrow version Ø 6-6 mm double-acting with magnetic piston cushioning: elastic with integrated ball rail guide 3 overview overview 9 Sensors and sensor mountings, accessories Sensor,
More informationRodless cylinders Rodless cylinders Series RMC. Brochure
Brochure Bosch Rexroth AG Pneumatics -SB Ø 16-32 mm double-acting with magnetic piston Slide bearing guide cushioning: pneumatically, adjustable 4 -SB Ø 16-32 mm double-acting with magnetic piston long
More informationGripper and vacuum technology Vacuum suction grippers Series SGN. Brochure
ripper an vacuum technology Vacuum suction grippers Brochure 2 ripper an vacuum technology Vacuum suction grippers F = 1.5-35 N external iameter: 6.3-30 mm external threa 3 F = 1.5-35 N external iameter:
More informationDouble piston cylinder, Series TWC Ø6-32 mm double-acting with magnetic piston cushioning: elastic
Bosch Rexroth AG Pneumatics Ambient temperature min./max. +0 C / +60 C Medium Compressed air Max. particle size 5 µm Oil content of compressed air 0 mg/m³ - 1 mg/m³ Pressure for determining piston forces
More informationPiston rod cylinders Standard cylinders ISO 15552, Series ICL. Brochure
Brochure 2 Bosch Rexroth AG Pneumatics Profile cylinder, Ø 32-125 mm Ports: G 1/8 - G 1/2 double-acting with magnetic piston cushioning: pneumatically, adjustable Piston rod: external thread 4 Cylinder
More informationManifolds. Standard manifolds common cavity Standard manifolds special cavity Manifolds with emergency screw. Summary. General specifications
Manifolds RE 18325-85/01.11 1/16 Replaces: RE 18325-85/02.10 Standard manifolds common cavity Standard manifolds special cavity Manifolds with emergency screw Summary Description Standard manifold common
More informationSCHMIDT PneumaticPress
Maximum Pressing orce from 1.6 kn to 6 kn / 35 lbs. to 13,49 lbs. SCHMIDT PneumaticPresses consist of a modular system suitable for optimal transforming, joining and assembling operations within the pressing
More informationField bus connections Link structure BDC Link structure BDC, B-design. Brochure
Field bus connections, B-design Brochure Field bus connections, B-design Bus coupler with driver Direct field bus connection (BDC) Bus coupler with driver direct field bus connection Field bus protocol:
More informationField bus connections Link structure DDL Link structure DDL, bus coupler. Brochure
Brochure 2 Bus coupler with driver link structure DDL, S-design S-design Bus coupler with driver Field bus protocol: ControlNet / EtherNET/IP / MODBUS TCP / TCP/IP Stand-alone bus coupler link structure
More informationTH240g+Ko TH240g+Ko Pneumatic vise grip TH240g+2Ko Pneumatic vise grip TH240g + Ko TH240g + 2Ko Ordering information
Pneumatic vise grip Single pneumatic cylinder Sample size: 0 18 mm (depending on jaws) Weight: 1.55 kg each grip (without jaws) TH240g+2Ko Pneumatic vise grip Dual pneumatic cylinder Sample size: 0 18
More informationIndustrial Hydraulics FAQs
Industrial Hydraulics FAQs FAQ Title: Z versus K or K0 in model code Category: Proportional & Servo Valves Sub-Category: Directional Control Valves Bosch Rexroth Corporation Hydraulics 5 City Line Road
More informationRK E Frenco GmbH
RK E 04 2016 Frenco GmbH General Information Universal rotation measuring instruments are coordinate measuring devices for rotationally symmetric workpieces. The measurement is carried out by means of
More informationDraft sensor KMB series 30
Draft sensor KMB series 0 RE 95170 Edition: 09.201 Replaces: 04.2012 Sensor for draft measurement Features Draft sensor according to Category rear three-point attachment (ISO 70-1) Sensor element with
More informationPosition sensor PO1 series 20
Position sensor PO1 series 20 RE 95160 Edition: 09.2013 Replaces: 03.2012 Inductive sensor for position measurement Features Axially moving button with spring preload Inductive element according to the
More informationValve island VM10 with EtherNet/IP Interface 8, 10, 12 or 16 stations. Operation & Service Manual
Valve island VM10 with EtherNet/IP Interface 8, 10, 12 or 16 stations Operation & Service Manual Change history: The Change history reflects all changes of the, which were done after the initial release.
More informationRoller Rail Systems. (Additional roller runner blocks SNS R1822, SLS R1823, FXS R1854) R310EN 2315 ( ) The Drive & Control Company
Roller Rail Systems (Additional roller runner blocks SNS R18, SLS R183, FXS R1854) R31EN 315 (1.9) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems
More informationModular I/O system. Power module
2 Bosch Rexroth AG Electric Drives and Controls Documentation Supply module Connection: 1x M23 / 6x M12 The passive feed module is used to supply voltage to IndraControl S67 components. Thanks to options
More informationElectromechanical pressure switches
Presentation Electromechanical pressure switches For control circuits, types ACW and ADW Presentation Pressure switches type ACW and ADW are switches for control circuits, with an adjustable differential.
More informationG. S50T60. B3. S1. Suction cups/grippers pigrip Modular suction cups. Product Group. Lip. Bellows or Flat Cup. Support. pigrip.
Suction cups/grippers pigrip odular suction cups Product Group pigrip Lip Bellows or lat Cup Support Dimension & Type aterial & Durometer G S25 Ø 25 mm Standard lip B1 1 bellows S1 Support type 1 S35 S50
More informationUniversal Compact Extruded Cylinders
Universal Compact Extruded Cylinders Clippard s new Compact, Extruded Body Cylinders are available in double acting, double rod, single acting spring return, and single acting spring extended models. Universally
More informationFieldline. 4 digital inputs, 4 digital inputs/outputs RF-FLM DIO 8/4 M8
4 digital inputs, 4 digital inputs/outputs 2 Bosch Rexroth AG Electric Drives and Controls Documentation Technical data Local bus interface Designation Local bus M8 connector Supply for module electronics
More informationDIGICO 1 and 2 Electronic Indicators Both models are remarkable for their versatile functions, large measuring span and high accuracy.
DIGICO 1 and 2 Both models are remarkable for their versatile functions, large measuring span and high accuracy. LC display with colored background 6 digits plus minus sign.34" x.177"/ 9 x 4. mm digit
More informationAnalog input module. 4 inputs, voltage and current
2 Bosch Rexroth AG Electric Drives and Controls Documentation 4 inputs: M12, 0 to 20 ma, 4 to 20 ma, ±20 ma, 0 to 10 V, ±10 V Technical data S67-AI4-U/I-M12 Local bus interface Designation System bus M12
More informationMore Precision. wiresensor // Draw-wire displacement sensors
More Precision wiresensor // Draw-wire displacement sensors 44 Draw-wire aluminum sensor mechanics wiresensor - Use almost any encoder - Robust aluminum profile housing - High quality sensor components
More informationMating connectors and cable sets for valves and sensors in hydraulics
Mating connectors and cable sets for valves and sensors in hydraulics RE 08006/0. Replaces: 04. /4 Table of contents See page to 5 Features Mating connectors and cable sets for the electrical connection
More informationTemperature module. 4 inputs for thermocouples
2 Bosch Rexroth AG Electric Drives and Controls Documentation 4 inputs, M12 Thermocouples (TC) M12 Technical data S67-AI4-UTH-M12 Local bus interface Designation System bus M12 connector, B-coded, 5-pin,
More informationDual rod cylinder with guide function for pick & place applications.
ual Rod ylinder Series XS ø, ø, ø, ø, ø, ø32 ual rod cylinder with guide function for pick & place applications. Series XS Twice the thrust on-rotating accuracy ±. X TS Y Y G X - - ata all bushing bearings
More informationActuator LA31. Data sheet LINAK.COM/DESKLINE
Actuator LA31 Data sheet LINAK.COM/DESKLINE LA31 The LA31 actuator is a very quiet and powerful linear actuator desigend for a variety of desk applications ranging from kitchen applications to industrial
More informationULTRASONIC. Proximity Sensors. Series UX micro. Key-Features:
ULTRASONIC Proximity Sensors Series UX micro Key-Features: Content: Technical Data...2 Detection Beam.4 Technical Drawing.4 Connection & Applications...5 Order Code & Accessories...6 - Very small dimensions
More informationMechanical and adapters
Pneumatic expansion shafts Mechanical expansion shafts Expansion couplings Expansion chucks and adapters Friction and knife shafts Shaft handling Expansion chucks and adapters E X P A N S I O N U N I T
More informationIECEx Certificate of Conformity
IECEx Certificate of Conformity INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate No.:
More informationMore Precision. indusensor // Linear inductive displacement sensors
More Precision indusensor // Linear inductive displacement sensors 12 Long-stroke sensors for hydraulics & pneumatics indusensor EDS - Measuring ranges from 75... 630 mm - Linearity: ± 0.3 % FSO - Integrated
More informationDigital I/O modules. 8 inputs/outputs, M8
2 Bosch Rexroth AG Electric Drives and Controls Documentation Digital I/O module 8 inputs/outputs 0.5 A per channel M8 Technical data S67-DIO8-M8 Local bus interface Designation System bus M12 connector,
More informationMini slides SLT/SLS/SLF
Mini slides SLT/SLS/SLF Precision, rigid guide Highly flexible Adjustable end position cushioning 03/10 Subject to change Products 04/05 1 / 1 Mini slides SLT/SLS/SLF Features SLS SLF SLT SLT/SLS/SLF SLT
More informationInch / Cross Type Metric Section Style Material Page. Inch Deep Style 92 Durometer Urethane with 70 Durometer Nitrile Energizer
Hydraulic Seals Inch / Cross Type Metric Section Style Material Page Standard 92 Durometer Urethane 7-11 with 70 Durometer Nitrile Energizer Inch Deep Style 92 Durometer Urethane 12-16 with 70 Durometer
More informationPNEUMATIC CRIMPER PC 12-8B OPERATING MANUAL
PNEUMATIC CRIMPER PC 12-8B OPERATING MANUAL CONTENTS www.americanelectrical.com SAFETY BASIC INFORMATION... 1 SYMBOLS.1 OPERATION OF MACHINE & POSSIBLE DANGERS. 1 DESIGNATED USE. 2 DANGERS 2 PLACES FOR
More informationCommunication modules. Serial interface module
2 Bosch Rexroth AG Electric Drives and Controls Documentation 2 serial channels RS232, RS485/422 4 digital inputs/outputs M12 Technical data S67-RS-UNI-M12 Local bus interface Designation System bus M12
More informationEasyHandling Connection Technology 1.1
EasyHandling Connection Technology 1.1 2 EasyHandling Connection Technology 1.1 EasyHandling Connection Technology 1.1 3 Contents 4 Combination options for Grippers 5 Combination options for Rotary Compact
More informationGR Series Adjustable Angular Gripper
GR Series Adjustable Angular Gripper www.numatics.com Table of Contents GR90 Series Angular Grippers Features & Benefits 3 How to Order 3 Dimensions 4 Technical Specifications 5 Switch Information 6 Quick
More informationPL Nickel-Plated Brass Spigot Fitting Range
P Nickel-Plated Brass Spigot itting Range P nickel-plated Brass Spigot ittings Stud ittings BP 3BP 4BP BSPP 8BP Metric BP 3BP 4BP BSPP 8BP Metric RBP R3BP SBP S3BP Banjo itting Tube-to-Tube ittings omplementary
More informationService case with test unit for servo-valves without integrated electronics
Service case with test unit for servo-valves without integrated electronics RE 29681/05.11 Replaces: 06.10 1/6 Type VT-SVTSY-1 Series 1X H6100_d Table of contents Contents Page Features 1 Ordering code
More informationInductive Cylinder Position Sensors
Inductive Cylinder Position Sensors 4-Wire DC (NPN and PNP) 2-Wire AC/DC Weld immune 250, 000, and 3000 psi designs C-Series F-Series Rating (psi) Probe Diameter Inductive Cylinder Position Sensors Pepperl+Fuchs
More informationSPH/BA Motorsports. Clean-break couplings for high pressure circuits
SPH/BA Motorsports Clean-break couplings for high pressure circuits Choose SPH/BA couplings... Applications - shock absorbers, brake and hydraulic lines - lubrication and coolants Combine lightweight and
More informationUniversal Tristop Cylinder for Cam Brakes
Tristop for Cam Brakes 3rd Edition This publication is not subject to any update service. New versions are available in INFORM at www.wabco-auto.com Copyright WABCO 2006 Vehicle Control Systems An American
More informationThermal Mass Flowmeter Sensyflow FMT200-D
Data Sheet Thermal Mass Flowmeter Sensyflow FMT200-D Direct measurement of mass flow or standard volume flow of compressed air, nitrogen and biogas independent of media pressure and temperature Wide measuring
More informationGrounding Systems / Ground Monitoring Device Series 8146/5075 and 8125/5071
www.stahl.de > Monitored electrostatic grounding of tank containers and drums during loading > Continuous monitoring of correct grounding > Robust design > Weather-protected plastic enclosure (IP66) or
More informationFieldline. Fieldline Modular bus coupler, PROFIBUS, 8 digital inputs 24 V DC, M12 RF-FLM BK PB M12 DI 8 M12
Modular bus coupler, PROFIBUS, 8 digital inputs 24 V DC, M12 RF-FLM BK PB M12 DI 8 M12 2 Bosch Rexroth AG Electric Drives and Controls Documentation Technical data Local bus interface Designation Local
More informationComposite Push-In Fittings - NPTF/INCH
composite FITTINGS Composite Push-In Fittings - F/INCH Tube diameter: Ø /8", 5/32", /4", 5/6", 3/8", /2" Connections /8, /4, 3/8, /2 F These new models have been released in technopolymer, maintaining
More informationClamping Systems. PClamp. PClamp N. PClamp E. Gewährleistung. Inhalt. RotoClamp. DiskClamp. LinClamp. PClamp
Gewährleistung Inhalt N dvantages 1 Pneumatic clamping with high forces General information 2 Optimum safety clamping pneumatic failure locks the system The performance of hydraulic clamps will be achieved
More informationCONNECTED BY AVENTICS PNEUMATIC CONNECTION TECHNOLOGIES
CONNECTED BY AVENTICS PNEUMATIC CONNECTION TECHNOLOIES 2 Connected by AVENTICS Expertise A reliable connection with quick release Pneumatic tubing is just as easy to release as it is to securely connect
More informationCylinders. CGT Series. Compact Guide Slides. We re everywhere you need us to be! 141
We re everywhere you need us to be! CGT Series Compact Guide Slides Pneumatic-Catalogue-GB-28-1 www.numatics.com 141 CGT Series : CGT Series General Information CGT Series is ideal where high load and
More informationTemperature module. 4 inputs for resistance thermometers
2 Bosch Rexroth AG Electric Drives and Controls Documentation 4 inputs, M12 Resistance thermometer, resistors, potentiometer Technical data S67-AI4-RTD-M12 Local bus interface Designation System bus M12
More informationElectric Actuators Type 5824 (without fail-safe action) Type 5825 (with fail-safe action)
Electric Actuators Type 5824 (without fail-safe action) Type 5825 (with fail-safe action) Application Electric actuators designed for valves used in heating, ventilation and air-conditioning systems as
More informationVCB22, 5/2 Solenoid actuated In-line spool valves
, / olenoid actuated nline spool valves >> ort size:, /... / ( ) >> ew design for industrial automation >> igh flow rate >> onnector with light as standard >> aintenancefree >> ubbase system for easy assembly
More informationGoTo Europe Focused Delivery Program
GoTo Europe Focused Delivery Program Product Produktübersicht Overview Lineartechnik Motion Technology 2 GoTo Europe The products I need when I need them In today s global competition every day counts.
More informationPressure switch RE B/ Type HEDE10.../1/ Operating instructions
Pressure switch Type HEDE10.../1/ RE 30276-B/10.10 Replaces: 06.10 Operating instructions 2/20 Bosch Rexroth AG HEDE10.../1/ RE 30276-B/10.10 Contents 1 Overview of menu...3 2 Safety note... 4 3 Operating
More informationControl block EDC Modular Directional Valve Flow Sharing System
Control block EDC Modular Directional Valve Flow Sharing System 2 Control block EDC Modular Directional Valve Flow Sharing System osch Rexroth Oil Control S.p.. introduces the EDC size 06 dvantages directional
More informationLimit switches 3. with solenoid interlocking. Metal, type XCSE and XCSL. Page 6/284. Page 6/296
ntroduction, Specifi cations Limit switches with solenoid interlocking etal, type CSE and CSL Plastic, double insulated, type CSTE etal, type CSE and CSL Safety interlock switches with locking of the actuator
More informationB63/ NS MS. EtherNet/IP LINK
3 609 929 B63/ IMenip 2008-09 NS MS EtherNet/IP LINK 3 609 929 B63/2008-09 IMenip Bosch Rexroth AG 15/76 Table of Contents About this document................. 16 General safety instructions............
More informationThickness Gages SERIES 547, 7
Thickness Gages SERIES 547, 7 Thickness Gages offer a quick and efficient means of inspection with their convenient grip handle, thumb trigger and springloaded spindle. The various models cover a wide
More informationPneumatic Components for Automatic Systems
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Pneumatic Components for Automatic Systems The Drive & Control
More information35 t Plus series. PLUS 35 t
35 t Plus series PLASTICS TECHNOLOGY INJECTION MOLDING TECHNOLOGY PLUS 35 t BATTENFELD Injection Molding Machines special features of the PLUS range THE PLUS Compact, powerful, profitable! The keyword
More informationLimanda. Technical data
Polyamide hand held enclosures for data acquisition, MCR and automation engineering 2 sizes: 270 x 248 x 64 mm to 311 x 281 x 72 mm Large fitting area For installations and command devices mobile and stationary
More informationLimanda. Technical data
Polyamide hand held enclosures for data acquisition, MCR and automation engineering 2 sizes - 270 x 248 x 64 mm to 311 x 281 x 72 mm Large fitting area For installations and command devices mobile and
More informationType Differential pressure transducer
Homepage > Products > Control systems > Control system EASYLAB - LABCONTROL > Sensor systems > Type Differenzdrucktransmitter Type Differential pressure transducer FOR THE DIFFERENTIAL PRESSURE RECORDING
More informationSINGLE OR DOUBLE ACTING CYLINDERS, Ø 8 to 25 mm
SINGLE OR DOUBLE ACTING CYLINDERS, to mm CONFORMING WITH ISO 43 - CETOP - AFNOR STANDARDS ISOCLAIR - SERIES 435 - TYPES : C-AS, CC-AS P-GB-R5 ISOCLAIR AIR CYLINDERS to mm OPERATIONAL DIAGRAMS ( to mm)
More informationLASER WELDERS FOR MOLD REPAIR ULTRA-PRECISION, FAST RESULTS. Made in Italy. Supplied and Serviced by
LASER WELDERS FOR MOLD REPAIR ULTRA-PRECISION, FAST RESULTS Made in Italy. Supplied and Serviced by SWA Key Features: Weld Any Mold Size Sisma s Most Flexible Laser Welder Advanced Fiber Transport of Laser
More informationInstrument Prep & Pack Tables... Ergonomic/Hydraulic
Instrument Prep & Pack Tables... Ergonomic/Hydraulic KTW Medical offers the finest ergonomic solution with push button height adjustability. Designed to maximize productivity and reduce overexertion we
More informationRexroth IndraDrive Cs Multiprotocol-capable compact drives
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service Rexroth IndraDrive Cs Multiprotocol-capable compact drives Universal, intelligent and economical 2 Rexroth
More informationRotary Measuring Technology Absolute singleturn encoder shaft version
Highest shock resistance on the market ( 2500 m/s 2, 6 ms acc. to DIN IEC 68-2-27) SSI, parallel or current (4... 20 ma) interface Divisions: up to 16384 (14 bits), singleturn Housing Ø 58 mm IP 65 Various
More informationCordless Drill Driver A 18 M bl MaxiMAX in the MAFELL-MAX
Cordless Drill Driver A 18 M bl MaxiMAX in the MAFELL-MAX ref.no.: 91A040 EAN: 4032689193274 Transport and storage box MAFELL-MAX Technical data Collar diameter 43 mm Chuck capacity 13 mm Max. drilling
More informationSpare parts list. Handheld pneumatic pick hammers CP 0222 CHIT, CP 0222 CHIT BS, CP 0222 CHOT BS.
Spare parts list Handheld pneumatic pick hammers CP 0 CHIT, CP 0 CHIT, CP 0 CHOT www.cp.com CP 0 CHIT, CP 0 CHIT, CP 0 CHOT 9800 00 0 CP 0 CHIT, CP 0 CHIT, CP 0 CHOT Contents Contents General information...............................................................
More informationSoftware tools. CamBuilder
2 Bosch Rexroth AG Electric Drives and Controls Documentation Application description Easy creation of cams with the help of graphical objects Utilization of motion laws according to VDI 2143 Switching
More informationAUTOMATIC TENSION & COMPRESSION TESTING MACHINE
Product Code UTM-3000 Automatic 500 kn Tension and 1000 kn Compression Testing Machine Standards GENERAL PROPERTIES UTM-3000 automatic 500 kn tension and 1000 kn compression testing machine has been designed
More informationCompact operator panels " display IndraControl VCP 02, 05, 08, 11
3-3.8" display IndraControl VCP 02, 05, 08, 11 2 Bosch Rexroth AG Electric Drives and Controls Documentation Technical data VCP 02.2 VCP 05.2 VCP 08.2 VCP 11.2 VCP 11.2T Processor CPU RISC ARM9 200MHz
More informationProduct Information. Anti-collision and overload protection sensor OPR
Product Information OPR OPR Compliant. Highly responsive. Automatic reset. OPR collision and overload sensor Collision and overload protection with automatic reset for protecting robots and handling units
More informationCG - CRANKSHAFT GRINDING MACHINES
CG - CRANKSHAFT GRINDING MACHINES AZ spa MACHINE TOOLS model CG270-2000 CG300-2200 CG360-3300 HIGH SPEED AND WORKING QUALITY The crankshaft grinding machines model CG have peculiar characteristics that
More informationP.G.Information. (Specialized product)
P.G.Information (pecialized product) M orporation kihabara DX 15, 4-14-1, otokanda, hiyoda-ku, Tokyo 101-0021, JP RL http://www.smcworld.com 200 M orporation ll rights reserved. P05-015 Issued: May, 200
More informationProduct Information. Anti-collision and overload protection sensor OPR
Product Information OPR OPR Compliant. Highly responsive. Automatic reset. OPR collision and overload sensor Collision and overload protection with automatic reset for protecting robots and handling units
More informationFeatures and Benefits... 3 How To Order... 3 Dimensions and Specifications... 4 Switch Information... 5
Table of Contents PG6J80 Series 6 Jaw Gripper with Ejectors...3-5 Features and Benefits... 3 How To Order... 3 Dimensions and Specifications... 4 Switch Information.... 5 Numatics 2009 Rev. 1/09 2 PG6J80
More informationTightening system. Hand-held Nutrunners ErgoSpin SlimLine
Hand-held Nutrunners ErgoSpin SlimLine 2 Bosch Rexroth AG Electric Drives and Controls Documentation Instructions Right-angle nutrunner with slim angle head for high accessibility. Technical data Working
More information8 Series Pushbutton Switches
8 Series Pushbutton Switches Features. Contacts Silver or gold-plated contacts.. Epoxy resin case UL94V-0 self-extinguishing epoxy. 3. Actuator style Over 30 actuator variations. 4. Insulation between
More informationXDV-UDH UNI-DIRECTIONAL KNIFE GATE VALVES
UNI-DIRECTIONL KNIFE GTE VLVES FETURES Special L shaped replaceable seat. Roller bearings in SS housing on all all sizes. Fully lugged to suit S0 CL. Stainless steel stem protection tube included. Gearbox
More informationCAPACITIVE SENSORS KAS
CAPACITIVE SENSORS KAS SerieS 95 Sensors for industrial automation in the Agriculture Industry Feed Industry Filling Level Control Backlog Jam Indication Full / Empty Indication Registration No.: 1327-01
More informationpneumatic push-in fittings system LF 3000
pneumatic push-in fittings system LF 3000 Parker Legris connectic products are available from MARYLAND METRIS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
More informationCover plates Porting patterns to DIN form A and J4, ISO 4401, plugs and plug screws for valve bores
s Porting patterns to DIN 24340 form and J4, ISO 4401, plugs and plug screws for valve bores RE 48042/10.05 Replaces: 01.03 1/20 ype HS 4 to 35 series 3 and 4 Maximum operating pressure 315 bar able of
More informationInterface Connectors for Portable Terminal Devices
Interface Connectors for Portable Terminal Devices ST Series Strong locking mechanism Right Mating axial direction Overview The ST Series interface connectors are specifically designed for use as Input/Output
More informationSPOT WELDING GUNS MEDIUM & HEAVY DUTY kva
SPOT WL US U & VY UTY -7 kv SUSP SPOT WL US T. J. Snow stocks a variety of inventory and offers support services of all T portable and stationary resistance spot welding machinery. T s top of the line,
More informationT2 B Series. Compact Height Nitrogen Gas Springs
T2 B Series Compact Height Nitrogen Gas Springs ife in excess of 100,000 stroke meters. Cartridge design for easy maintenance. Oil pipe prevents oil leaving the springs in a hosed system and helps maintain
More informationMini Slides DGSL Metric Series Overview
Mini Slides DGSL Metric Series Overview High load capacity and positioning accuracy Maximum flexibility thanks to eight sizes Guide unit with high linear and parallel precision Simple coarse adjustment
More informationCompact Fluorescent Lampholders
Table of Contents GR14q 26.738 [03] 14, 15 GZ16q 26.739 [03] 16 G23 26.719 [03] 17-19 26.721 [03] 17, 18 GX23 / GX23-2 26.720 [03] 20, 21 Supports for TC-S lamps 26.719 [03] 22-24 G24 / GX24 26.745 [03]
More informationTEX. Spare parts list. Handheld pneumatic pick hammers 03PS Atlas Copco Construction Tools AB No
TEX 0PS Spare parts list Handheld pneumatic pick hammers 0 Atlas Copco Construction Tools AB No. 9800 0976 0 004 TEX 0PS Contents Contents General information................................................................
More informationLeveling Procedures using the Theodolite
Leveling Procedures using the Theodolite Technical Note 10100120 Rev. B 10100120 - B Matan Digital Printers Ltd. Page 1 of 18 Safety Procedures Before reading this Technical Note, please refer to the section
More informationSIZES FROM 1, ,000 Nm BACKLASH FREE, TORSIONALLY STIFF METALLIC BELLOWS COUPLINGS
BX ZA SIZES FROM 1,500-100,000 Nm BAKLASH FREE, TORSIONALLY STIFF METALLI BELLOWS OUPLINGS BELLOWS OUPLINGS BX ZA Optional: GENERAL INFORMATION ABOUT R+W BELLOWS OUPLINGS: SERVIE LIFE R+W bellows couplings
More informationCROWN CLIP Series Sockets
OWN LIP Series Sockets Product Facts ompact design High performance OWN BND contacts urrents to 350 mps 1 Mates with solid or laminated blades Supports true hot-plug (current interruption)2 Float-mount
More informationmicrosd Card Connectors
microsd Card Connectors DM Series Jan..08 Copyright 08 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features Common to the entire Series. Extremely small in size Small external dimensions and the above-the-board
More informationISO*STAR - ATEX version (SXE, SXP) 5/2 & 5/3 Solenoid and pilot actuated glandless spool valves
*STR - TX version (SX, SXP) / & / > > Sub-base mounted, 99- s, or > > Specially coated glandless spool and sleeve for long trouble-free life > > Integral flow regulators available on and s for cylinder
More informationDouce Hydro. Serie DHI - MT4 - Center trunnion mounting - 1 -
Standard specifications: Heavy duty hydraulic cylinders - 3000 PSI Square head industrial cylinders Mounting dimensions: NFPA specifications and ANSI/B93.1 191 Serie DHI - MT - Center trunnion mounting
More information