1492 XIM RF. No. Cable Connector Pins pins pins. Expander module. Module Type (all types do not configure a catalog number)

Transcription

1 Digital Interface Modules (XIMs) Relay Bulletin XIM RF a b c d Overview XIM RXIM XIMTR RXIMTR XIMTS RXIMTS a Modules Relay Interface Module with Fixed Relay Interface Module with Removable Mechanical High Density Relay Interface Module with Fixed Mechanical High Density Relay Interface Module with Removable Solid-State High Density Relay Interface Module with Fixed Solid-State High Density Relay Interface Module with Removable b No. Cable Connector Pins pins pins Blank Expander module c Module Type (all types do not configure a catalog number) F F-F F-F V relay coil x mm fuse holders with V blown fuse indication x mm fuse holders with V blown fuse indication D V relay coil V relay coil d Number of Field Side Wiring Terminals Blank d No. Cable Connector Pins terminals per point R R RF R relays relays fused relays relays One per I/O connection (Standard Two per I/O connection (Extra Three per I/O connection (Sensor Four per I/O connection (Special Terminal) Relay master and expander XIMs are available for Bulletin,,, and digital output modules. Relay Master XIM Provides or relay outputs for a digital output module. There are relays with fusing. Expander XIM In addition to the relay master XIM, an expander XIM provides eight additional outputs. There are three types of expander XIMs: eight-channel relays, eight-channel fusing, and eight-channel feed-through XIMs, sixteen channel relays, sixteen channel relays with fusing. Relay Master Relay Master with Fusing High Density Relay Master Relay Masters For -point: Cat. No. -XIM-R, -XIM-R, -XIM-R, -XIM-R For -point: Cat. No. -XIM-R Relay master XIMs feature field-replaceable relays with V or V rated coils. The field-side Form C contacts are rated V A (derated to A per adjacent pair on the XIM). The Form C relay output provides isolated output channels and a different voltage level from one output channel to the next. Other features include coil-side LED indicating the output module status, and transient suppression on each coil. In addition, some relay masters have x fuse holders so customers can fuse the output contacts. Available in pt or pt modules, the high density relay modules eliminate the need for extender relay modules. Available in easily replaceable plug-in style electromechanical or solid-state relays. LED indicator lights are provided for each output circuit with removable terminal blocks (RTB s) available as an option for connecting the field devices. -

2 Bulletin Overview Digital Relay Expander ( Outputs) Digital Relay Expander ( Outputs) with Fusing Relay Expander Cat. No. -XIM-R,-XIM-RF,-XIM-R Relay Masters with Fusing For -point: Cat. No. -XIM-RF, -XIM-RF For -point: Cat. No. -XIM-R Relay expander XIMs feature field-replaceable relays with V or V rated coils. The field-side Form C contacts are rated V A (de-rated to A per adjacent pair on the XIM). The Form C relay output provides isolated output channels and a different voltage level from one output channel to the next. Other features include coil-side LED indicating the output module status, and transient suppression on each coil. In addition, a relay expander can have x fuse holders so customers can fuse the output contacts. An expander cable is provided for connection to the mating module. Fusible Expanders Feed-Through Expanders Fused Expander Products Cat. No. -XIMF-, -XIMF-- The fusible expander modules feature eight x finger-safe fuse holders, blown fuse indicators, and extra terminals for landing two wires per field-side device. They are offered with eight fuse holders for both V and V applications. An expander cable is provided for connection to its mating module. Feedthrough Expander Products Cat. No. -XIMF- The feed-through expander modules feature eight channels with extra terminals for landing two wires per field-side device. An expander cable is provided for connection to its mating module. -

3 Bulletin Bulletin ControlLogix Modules Relay XIMs and Cables for Bulletin ControlLogix -point and -point I/O Modules [V] Term. per I/O Fixed Removable RTB Plugs -IAD -IA Bulletin ControlLogix I/O Module Cat. No. Cat. No. Cat. No. Digital Cable Cat. No. Suffix Relay Master, LED Indicating Relays -XIM-R X Relays -XIM-R X Relays w/fusing -XIM-RF X Relays -XIM-R X Relays -XIM-R X Relays w/fusing -XIM-RF X High Density Relay Master, LED Indicating Relays - Mechanical -XIMTR-R -RXIMTR-R X -RTB Relays - Solid-State -XIMTS-R -RXIMTS-R X Relay Expander, LED Indicating Relays -XIM-R -RXIM-R -RTB Relays -XIM-R -ch - blown fuse indication -ch - blown fuse indication Fusible Expander -XIMF-F- -XIMF-F- Feed-Through Expander -ch -XIMF- To order a Pre-wired Cable, add the appropriate letter from the selection table above to the end of the Cat. No. below..m Cable = -CABLE_.M Cable = -CABLE_.M Cable = -CABLE_.M Cable = -CABLE_ Custom Length Cable = -CABLEXXX_. See Catalog Number Explanation on page - for available Custom Length s to replace XXX in Cat. No. Order plugs separately (two plugs per catalog number). Plugs are available in screw style and push in style terminal types. To order, replace the in the catalog number with the code for the desired terminal style. The code for screw style is N and the code for push in style is P. Can have up to one () expander module depending upon master used (total outputs or less). An extender cable is provided. LED indicating PLC output status The voltage rating is relay control/coil voltage. For relay contact ratings, refer to page -. -IB -IC -IN -IV -OA -OAD -OAE -OA -OB -OBE -OC -ON -OVE -

4 Bulletin Bulletin CompactLogix Modules Relay XIMs and Cables for Bulletin CompactLogix -Point and -Point I/O Modules [V] Term. per I/O Fixed Removable RTB Plugs -IAI -IA Bulletin CompactLogix I/O Module Cat. No. Cat. No. Cat. No. Digital Cable Cat. No. Suffix Relay Master (LED Indicating) DC Relays -XIM-R E AC Relays -XIM-R H DC Relays -XIM-R E DC Relays w/fusing -XIM-RF E AC Relays -XIM-R H AC Relays w/ fusing -XIM-RF H High Density Relay Master, LED Indicating Relays - Mechanical -XIMTR-R -RXIMTR-R -RTB E Relays - Solid-State -XIMTS-R -RXIMTS-R E Relay Expander (LED Indicating) Expander w/ DC relays -XIM-R -RXIM-R -RTB Expander w/ DC relays -XIM-R Fusible Expander -ch w/ blown fuse LED -XIMF-F- -ch w/ blown fuse LED -XIMF-F- Feed-Through Expander -ch Expander -XIMF- To order a Pre-wired Cable, add the Suffix No. from the table above to the end of the Cat. No. below..m Cable = -CAB_.M Cable = -CAB_.M Cable = -CAB_.M Cable = -CAB_ Custom Length Cable = -CABXXX_. See Catalog Number Explanation on page - for available Custom Length s to replace XXX in Cat. No. Order plugs separately (two plugs per catalog number). Plugs are available in screw style and push in style terminal types. To order, replace the in the catalog number with the code for the desired terminal style. The code for screw style is N and the code for push in style is P. In the input module's sink mode only. One expander module is connected to a master to provide a total of outputs. An extender cable is included with each expander to connect it to the master. This IFM is not recommended for use the PLC I/O modules that have an off-state leadkage current exceeding. ma. Use a -IFMDN or - IFMDA- for inputs. Use -IFMD- for outputs. The LED indicates the PLC output status. The voltage rating is relay control/coil voltage. For relay contact ratings, refer to page -. -IQ -IQF -IM -OA -OA -OB -OB -OV -OW -OWI -OW -

5 Bulletin Specifications Analog IFM Specifications Analog IFM Cat. No. Range Max. Current (Per Circuit) [A] Max. Current (Per Module) [A] Dimensions (W x H x D) [in.] Indicator Circuit Current (Nominal) [ma] Label Card Cat. No. -AIFM-, -RAIFM- V DC. x. x. -- -AIFMC-F- V DC. x. x. -- -AIFMI-F- V DC. x. x. -- -AIFMS-, -RAIFMS- V AC/DC. x. x. -- -AIFMTC- V AC/DC. x. x. -- -AIFMCE V AC/DC. x. x. -- -AIFMCE-F V AC/DC. x. x. V DC V DC -- -AIFM-, -RAIFM- V AC/DC. x. x. --, -- -AIFM-F- V DC. x. x. --, -- -AIFM-F- V DC. x. x. -- -AIFM-F- V DC. x. x. -- -AIFMQS V DC. x. x. -- -AIFMPI V DC. x. x. -- -TAIFM-F- V DC. x. x. -- Ships with each module. For spare part, precede the part number with the letter "W." Add. in. to the width dimension for Bulletin -Rxxx modules. Relay Master/Expandable Interface Module Specifications Relay Master/Expandable XIM Cat. No. Range Max. Current (Per Circuit/Per Relay Pair) [A] Max. Current (Per Module) [A] Dimensions (W xh x D) [in.] Indicator Circuit Current (Nominal) [ma] Label Card Cat. No. -XIM-R, -RXIM-R V DC /. x. x. -- -XIM-R V DC /. x. x. -- -XIM-R V AC /. x. x. -- -XIM-R V AC /. x. x. -- -XIM-R, RXIM-R V AC /. x. x. -- -XIM-R V AC /. x. x. -- -XIM-R V DC /. x. x. -- -XIM-RF V DC /. x. x. -- -XIM-R V AC /. x. x. -- -XIM-RF V DC /. x. x. -- -XIM-RF V AC /. x. x. -- -XIMF- V AC/DC /NA. x. x. -- -XIMF-F- V DC /NA. x. x. -- -XIMF-F- V AC /NA. x. x. -- -XIM-RF V AC /. x. x. -- -XIMTR-R, -RXIMTR-R V DC. x. x. -- -XIMTR-R, -RXIMTR-R V DC. x. x. -- -XIMTS-R, -RXIMTS-R V DC.. x. x. -- -XIMTS-R, -RXIMTS-R V DC.. x. x. -- Ships with each module. For spare part, precede the part number with the letter "W." -