Bulletin 700H and 700S Description SLC 500 ControlLogix MircoLogix 1200 MicroLogix 1500 CompactLogix Flex PLC-5 PowerFlex Drive Product Selection

Size: px

Start display at page:

Download "Bulletin 700H and 700S Description SLC 500 ControlLogix MircoLogix 1200 MicroLogix 1500 CompactLogix Flex PLC-5 PowerFlex Drive Product Selection"

Alexia Cross
6 years ago
Views:

Bulletin Overview Analog Wiring Systems Digital Wiring Systems with Field-Removable Terminal Blocks Analog Wiring Systems Digital Wiring Systems with Fixed Terminal Blocks Bulletin Increases machine

for Modules and Cables culus: Hazardous Locations: Class I Div (all except modules with relays); Groups A, B, D, and D. Temperature : TC @ C. UL File No. E, Guide No.

NRAQ Agency Certification Modules Factory Mutual (FM): Hazardous Locations; Class I Div (all except modules with relays): Gouprs A, B, C, and D. Temperature Rating: TC @ C. FM file J.I. CE Certifications Compliant for all applicable directives Table of Contents Catalog Number Explanation.

1 Bulletin Overview Analog Wiring Systems Digital Wiring Systems with Field-Removable Terminal Blocks Analog Wiring Systems Digital Wiring Systems with Fixed Terminal Blocks Bulletin Increases machine building productivity Simplifies design and engineering time Reduces wiring time and wiring errors Benefits from quality-looking panels Standards Compliance and Certifications Agency Certifications for Modules and Cables culus: Hazardous Locations: Class I Div (all except modules with relays); Groups A, B, D, and D. Temperature : C. UL File No. E, Guide No. NRAG culus: Ordinary Locations; Module with relays; UL File No. E Guide No. NRAQ Agency Certification Modules Factory Mutual (FM): Hazardous Locations; Class I Div (all except modules with relays): Gouprs A, B, C, and D. Temperature Rating: C. FM file J.I. CE Certifications Compliant for all applicable directives Table of Contents Catalog Number Explanation... - Selection Tables... - Digital IFM Specifications... - Standards Compliance and Certifications, Continued UL UL CSA C. No. CSA C. No. EN/IEC - Bulletin Bulletin H and S SLC ControlLogix MircoLogix MicroLogix CompactLogix Flex PLC- PowerFlex Drive Product Selection Web Web - Information for this product is available on the Industrial Controls Catalog website: Publication A-CAA-EN-P -

Bulletin Overview Digital Interface Modules (IFMs) General Information Digital IFMs are available with either a - or -pin cable connector.

Not all combinations of fields are valid catalog numbers. Use this breakdown for verification and explanation only.

b Digital Cable Connector Size pins pins a Modules IFM Digital Interface Modules with Fixed Terminal Block RIFM Digital Interface Modules with Removable Terminal Block TIFM Digital Interface Module

Volt Volt Volt -pin Connection Interface Module Number of Field Side Wiring Terminals One per I/O connection Blank (Standard Terminals) Two per I/O connection (Extra Terminals) Three per I/O

2 Bulletin Overview Digital Interface Modules (IFMs) General Information Digital IFMs are available with either a - or -pin cable connector. This is determined by the number of connections required for the I/O module. Important: The following catalog number breakdown is for explanatory purposes only. It is not a product configurator. Not all combinations of fields are valid catalog numbers. Use this breakdown for verification and explanation only. The cables used for Relay Master/Expander XIMs are the same as those used for Digital I/O Modules with the exception of the Cat. No. -OA output module, which uses the -CABLE*CR cable. b Digital Cable Connector Size pins pins a Modules IFM Digital Interface Modules with Fixed Terminal Block RIFM Digital Interface Modules with Removable Terminal Block TIFM Digital Interface Module for SIL (Safety Integrity Level ) IFM F a b c d c Module Type (all types do not configure a catalog number) A Input Module F Feedthrough F Fused Volt F Fused Volt FS Fused Isolated D LEDs N Narrow Volt Volt Volt -pin Connection Interface Module Number of Field Side Wiring Terminals One per I/O connection Blank (Standard Terminals) Two per I/O connection (Extra Terminals) Three per I/O connection (Sensor Terminals) Four per I/O connection (Special Terminal) The number of terminals varies with the type of IFM from one to four terminals per I/O point. Standard terminal IFMs provide one field-side wiring terminal per programmable controller input or output point, as well as enough terminals for the I/O module power connections. The standard terminals are ideal for applications where the I/O device commons are terminated in the field or remotely from the I/O panel. d Standard Terminal Interface Module Extra terminal IFMs provide two or four field-side terminals per input or output point. Non-isolated IFMs have two terminals per input or output point. Isolated IFMs have two or four terminals per input or output. Isolated IFMs have terminals isolated into or groups, which allows each group of I/O devices to reference a different power source. The extra terminal IFMs are beneficial in applications where the I/O devices are terminated within the same panel as the I/O modules eliminating the need for many additional terminal blocks. Sensor IFMs provide three field-side terminals per input point. The middle and lower rows of the terminals are commoned together in groups of, and serve as power busses for -wire sensor types of devices eliminating additional terminals, blocks, and jumpering systems. Extra Terminal Interface Module Three-Level Sensor Terminal Interface Module Publication A-CAA-EN-P -

3 Bulletin Overview Digital Cables Pre-Wired Bulletin pre-wired cables are designed to minimize control wiring in a panel. Pre-wired cables, when used with an IFM, replace the point-to-point wiring between Allen-Bradley programmable controller I/O modules and individual terminal blocks. The pre-wired cables have a removable terminal block or wiring arm at the PLC end of the cable and a cable connector on the other end to connect to the IFM. All of the pre-wired cables use a # AWG wire and are % tested for continuity to make a perfect connection every time. The digital pre-wired cables are offered in four standard lengths of.,.,., and. m to fit a variety of applications. Other length cables are also available as build to order products. Pre-wired cables are available for many of the SLC I/O, ControlLogix I/O, Flex I/O, Compact I/O, MicroLogix base I/O, MicroLogix (-Lxx) embedded I/O, and PLC- I/O. I/O Module RTB Pre-Wired Cable Connector Interface Module (IFM) Factory-Wired Digital Cables I/O-Ready I/O-ready cables have an I/O removable terminal block or wiring arm factory-wired to one end to of the cable and free connectors on the other end for wiring into standard terminal blocks or other type of connectors. I/O-ready cables have individual color-coded conductors for quick wire-to-terminal coordination. The I/O-ready cables use # AWG conductors for higher current applications or longer cable runs. The I/O-ready cables are offered in standard lengths of.,., and. m to fit a variety of applications. Other cable lengths are also available as build-to-order products. Pre-wired cables are available for the Bulletin SLC I/O, Bulletin ControlLogix I/O, Bulletin Compact I/O, Flex I/O, MicroLogix base I/O, MicroLogix (-Lxx) embedded I/O, and Bulletin PLC- I/O. I/O Module RTB I/O Module-Ready Cable Terminal Block Field Wiri Digital Cables IFM-Ready IFM-ready cables have a cable connector that attached to the IFM factory wired to one end and free connectors ready to wire to I/O modules or other components on the other end. IFM-ready cables use # AWG wire and have individual color-coded conductors for quick wire-toterminal coordination. The digital IFM-ready cables are offered in standard lengths of.,., and. m to fit a variety of applications. Other cable lengths are also available as build-to-order products. I/O Module Factory-Wired I/O-Ready Cable and Standard Terminal Blocks Interface Module (IFM) IFM-Ready Cable Connector Factory-Wired IFM-Ready Cable and Interface Module Publication A-CAA-EN-P -

4 Bulletin Catalog Number Explanation Catalog Number Explanation Digital Cables for Bulletin,, and Important: Use the following tables as a product confiurator for pre-wired, and I/O module-ready cables for Bulletins,,,, and - I/O controller digital I/O cables. All combination of these fields make valid product catalog numbers. Refer to selection tables for IFM compatibility, additional cables, and ordering. CAB A a b c a Digital Interface Cable b Standard or Length Cables Length. m (. ft). m (. ft). m (. ft). m (. ft) m (... ft). m (. ft increments)... m (... ft). m (. ft increments)... m (... ft). m (. ft increments) Standard Length Length c For use with Bulletin MicroLogix Modules A, B Pre-wired cables for Bulletin I/O controllers X T A, B, C, F W T U A, B, C, D, E, F, G, H, J, K, L, M RTN RTN RTNI RTN A B G H I/O-ready cable for -LAWA, and -LBWA I/O-ready cable for -LAWA, -LBXB, and -LBWA outputs For use with Bulletin MicroLogix Modules Pre-wired cables for Bulletin I/O base units I/O-ready cable for -AWA, and -BWA base unit inputs I/O-ready cable for -AWA, -BWA base units outputs I/O-ready cable for -BXB base unit outputs For use with Bulletin, and Digital Modules Pre-wired cables for -, -, and -channel Bulletin digital I/O modules I/O-ready cable with Cat. No. -RTBN terminal block I/O-ready cable with Cat. No. -RTBN terminal block I/O-ready for -channel -IQ I/O-ready for -channel -OB For Use with Bulletin Flex I/O, Cat. Nos. - TBDS, and -TBDS base units Pre-wired cables for Bulletin Flex digital I/O using the Bulletin -TBDS base Pre-wired cables for Bulletin Flex digital I/O using the Bulletin -TBDS base Digital I/O-ready cable with Cat. No. -RTBN terminal block Digital I/O ready cable for digital I/O using the Bulletin TBDS base - Publication A-CAA-EN-P

5 Bulletin Digital Cables I/O Ready Digital Cables I/O-Ready for Bulletin ControlLogix Cable Cat. No. Cable Cat. No. Standard Cable Lengths -CABLE TBNH.,.,. m Yes -CABLE TBCH.,.,. m Yes Standard Cable Lengths Available No. of Conductors Mating I/O Module Cat. No. -CAB RTN.,.,. m Yes -OA, -OW, -OB -CAB RTN.,.,. m Yes -IAI, -IA, -IQ, IQF, -OA, -OB, -OV, -OW, -OWI, -IM, -OW, -B -CAB RTNI.,.,. m Yes -IQ -CAB RTNO.,.,. m Yes -OB -CABLE N.,.,. m Yes -IQT, -OBT, -OVT Cables are available in standard lengths of.,., and. m. To order, insert the code for the desired cable length into the cat. no. ( =. m, =. m, and =. m). Example: Cat. No. -CABRTN is for a. m cable with a wired Cat. No. -RTBN on one end. Use # AWG wire. Discrete I/O ready cables should not be used with PLC analog I/O modules as a cable shield and drain wire are not provided. Cable Cat. No. Standard Cable Lengths Available No. of Conductors Mating Controller I/O Cable Cat. No. -CAB P.,.,. m No -OBT and -OVT Output Expansion I/O -CAB U.,.,. m No -IQT Input Expansion I/O -CAB T.,.,. m Yes -LAWA Outputs, -LBWA Outputs, -LBXB Outputs -CAB X.,.,. m Yes -LAWA Inputs, -LBWA Inputs, -LBXB Inputs I/O ready cables are available in standard lengths of.,., and. m. To order, insert the code for the desired cable length into the cat. no. ( =. m, =. m, and =. m). Example: Cat. No. -CABT is for a. m cable that could be used to connect a catalog number -IFMF to a catalog number -LAWA Input. Cable Cat. No. Standard Cable Lengths Available No. of Conductors Mating Base I/O Cat. No. -CAB T.,.,. m Yes AWA Outputs, BWA Outputs -CAB U.,.,. m Yes BXB Outputs -CAB W.,.,. m Yes AWA Inputs, BWA Inputs -CAB X.,.,. m Yes BXB Inputs I/O ready cables are available in standard lengths of.,., and. m. To order, insert the code for the desired cable length into the cat. no. ( =. m, =. m, and =. m). Example: Cat. No. -CABT is for a. m cable that could be used to connect a catalog number -IFMF to a catalog number -AWA Input. Uses # AWG wire. Uses # AWG wire. Standard Cable Lengths Available No. of Conductors Mating I/O Module Cat. No. -IAD, -IA, -IB, -IC, -IN, -IV, -OA, -OAD, -OAE, - OA, -OB, -OBE, -OC, -ON, -OVE -IAI, -IA, -IBD, -IBI, -IB, -IV, -IHI, -IMI, -OAI, -OBEI, -OBD, -OBIS, -OBI, -OB, -OVE,-OHI, -OWI, -OXI Cables are available in standard lengths of. m,. m, and. m. To order, insert the code for the desired cable length into the cat. no. ( =. m, =. m, and =. m). Example: Cat. No. -CABLETBNH is for a. m cable with a pre-wired Cat. No. -TBNH RTB on one end. Discrete I/O read cables should not be used with PLC analog I/O modules as cable shield and drain wires are not provided. Digital Cables - I/O-Ready for Bulletin CompactLogix Digital Cables I/O-Ready for Bulletin MicroLogix Digital Cables I/O-Ready for Bulletin MicroLogix Digital Cables I/O-Ready for Bulletin Flex I/O Available No. of Conductors Mating I/O Module Cat. No. -CAB G.,.,. m Yes -IB, -IB, -IV, -OB, -OBP, -OB, -OBEP, -OV, OVP, - OW, -IBXOB -CAB H.,.,. m Yes -IBD, -IB, OBP, -IBXOBP Cables are available in standard lengths of.,., and. m. To order, insert the code for the desired cable length into the cat. no. ( =. m, =. m, and =. m). Example: Cat. No. -CABG is for a. m cable. Not available for Analog I/O Modules Publication A-CAA-EN-P -

6 Bulletin Specifications General Wiring System Specifications Agency Certifications: Modules and Cables Agency Certification Modules CE Certifications Catalog Number -... culus Listed: Hazardous Locations: Class I Div (all except modules with relays); Groups A, B, D, and D. Temperature : C. Standard UL File No. E, Guide No. NRAG/NRAG culus Standard Locations; Module with relays; UL File No. E, Guide No. NRAQ/NRAQ Factory Mutual (FM): Hazardous Locations; Class I Div (all except modules with relays): Groups A, B, C, and D. Temperature Rating: C. FM File J.I. Compliant for all applicable directives Maximum Peak Transient Voltage V Maximum Current (per circuit) A (except relays) Maximum Current (per module) A (except relays) Terminal Block Wire Range (Rated Cross Section) Wire Strip Length Recommended Terminal Block Screw Tightening Torque Fixed Screw Style: # # AWG (... mm) Removable Screw Style: # to # AWG... mm) Removable Push-in Style: # to # AWG (...mm) Fixed Screw Style:. in. (. mm) Removable Screw Style:. in. (. mm) Removable Push-in Style:. in. (. mm) Fixed Screw Style:.. lb-in. (.. Nm) Removable Screw Style:.. lb-in. (.. Nm) Removable Push-in Style: NA (See Push-in RTB Plug Specifications) Operating Temperature Range...+ C Storage Temperature Cables C Storage Temperature Modules C Operating Humidity Pollution Degree % non-condensing Max. AWG # # # # # # Max. No. of Wires per Terminal Cat. Nos. -IFMF-FAD- and -IFMF-FD- are rated at A. Maximum number of the same gauge stranded copper conductors allowed per wire funnel. Pollution Degree is an environment where normally only non-conductive pollution occurs, except for occasional temporary conductivity caused by condensation shall be expected. For transients >V, use UL Recognized suppression device rated at. kv withstand. For relay contact ratings, refer to page -. - Publication A-CAA-EN-P

Bulletin 700H and 700S Description SLC 500 ControlLogix MircoLogix 1200 MicroLogix 1500 CompactLogix Flex PLC-5 PowerFlex Drive Product Selection

Bulletin 700H and 700S Description SLC 500 ControlLogix MircoLogix 1200 MicroLogix 1500 CompactLogix Flex PLC-5 PowerFlex Drive Product Selection Bulletin Overview Analog Wiring Systems Digital Wiring Systems with Field-Removable s Analog Wiring Systems Digital Wiring Systems with Fixed Terminal Blocks Bulletin Increases machine building productivity