Load Feeders and Motor Starters for Use in the Control Cabinet

Transcription

1 Load Feeders and Starters for Use in the Control Cabinet rice groups G W, 4O, 30, 4, 50, 60, 4B, 4D, 4E, 4L, 4C, 4D, 4F, 47, 4N, 5K, 5K, 5N, 764, 5, 6 / Introduction SIRIUS 3RA load feeders /4 General data 3RA direct-on-line starters /6 For snapping onto standard mounting rails or for screw fixing /0 For 60 mm busbars 3RA reversing starters /4 For snapping onto standard mounting rails or for screw fixing / For 60 mm busbars /3 Accessories /40 3RV9 infeed system for load feeders SIRIUS 3RA load feeders /4 General data 3RA direct-on-line starters /46 For snapping onto standard mounting rails or for screw fixing /47 For busbar systems 3RA reversing starters /4 For snapping onto standard mounting rails or for screw fixing /49 For busbar systems /50 Accessories /54 Busbar accessories SIRIUS 3RA6 compact starters /55 General data 3RA6, 3RA6 compact starters /64 3RA6 direct-on-line starters /65 3RA6 reversing starters 3RA64, 3RA65 compact starters for IO-Link /66 3RA64 direct-on-line starters /67 3RA65 reversing starters /6 Accessories /74 Add-on s for AS-Interface /76 Infeed systems for 3RA6 ET 00S starters and safety starters /9 General data /05 starters /06 terminal s /0 High-Feature starters /0 High-Feature terminal s / ower s / ower terminal s /3 ET 00S Failsafe starters /5 Failsafe terminal s /6 Safety s local and ROFIsafe /5 Safety s local and ROFIsafe terminal s /7 Accessories /3 ET 00S interface s /40 ET 00S I/O s /50 ET 00S fail-safe I/O s /54 ET 00S IO-Link master s /55 ET 00S software Notes: The 3RA load feeders (sizes S00/S0 to S3) can be found - in the Catalog Add-On IC 0 AO 04 in the DVD box IC0 - in the catalog Add-On IC 0 AO 04 at the Information and Download Center - in the interactive catalog CA 0 - in the Industry Mall Conversion tool see SIRIUS 3RM starters /3 General data /9 3RM0 direct-on-line starters /90 3RM reversing starters /9 3RM Failsafe direct-on-line starters /9 3RM3 Failsafe reversing starters /93 Accessories Siemens Siemens IC 0 IC

2 Load Feeders and Starters Introduction Overview 3RA 0 3RA 0 3RA 30 SIRIUS 3RA load feeders The 3RA fuseless load feeders consist of the 3RV starter protector and the 3RT contactor. The starter protector and contactor are prewired and mechanically and electrically connected in pre-assembled assembly kits (link s, wiring kits and standard mounting rail or busbar adapters). sizes (S00, S0) Can be supplied for direct-on-line start or reversing duty as - complete unit or - for self-assembly Can be supplied with screw or spring-type terminals 3RA direct-on-line starters Rated control supply voltage 50/60 Hz 30 V AC and 4 V DC 3RA /6 for snapping onto standard mounting rails or for screw fixing 3RA direct-on-line starters for 60 mm busbars 3RA reversing starters for snapping onto standard mounting rails or for screw fixing 3RA reversing starters for 60 mm busbars Accessories for 3RA direct-on-line and reversing starters SIRIUS 3RA load feeders 3RA direct-on-line starters for snapping onto standard mounting rails or for screw fixing 3RA direct-on-line starters for busbar systems 3RA reversing starters for snapping onto standard mounting rails or for screw fixing 3RA reversing starters for busbar systems Accessories for 3RA direct-on-line and reversing starters Rated control supply voltage 50/60 Hz 30 V AC and 4 V DC 3RA /0 Rated control supply voltage 50/60 Hz 30 V AC and 4 V DC 3RA /4 Rated control supply voltage 50/60 Hz 30 V AC and 4 V DC 3RA / The 3RA fuseless load feeders consist of the 3RV starter protector and the 3RT contactor. The starter protector and contactor are prewired and mechanically and electrically connected in pre-assembled assembly kits (link s, wiring kits and standard mounting rail or busbar adapters). sizes (S, S3) Can be supplied for direct-on-line start or reversing duty as - complete unit or - for self-assembly Can be supplied with screw terminals Rated control supply voltage 30 V AC, 50 Hz and 4 V DC for 35 mm standard mounting rail or for screw fixing Rated control supply voltage 30 V AC, 50 Hz and 4 V DC for 40 and 60 mm busbar systems Rated control supply voltage 30 V AC, 50 Hz and 4 V DC for 35 mm standard mounting rail or for screw fixing Rated control supply voltage 30 V AC, 50 Hz and 4 V DC for 40 and 60 mm busbar systems age /3 3RA30 /46 Only for self-assembly Only for self-assembly Only for self-assembly /47 /4 /49 /50 Central and compact starter solutions Our range offers you many different possibilities for simple and practical starter solutions in the control cabinet. Features common to all our load feeders, compact starters and starters: Like all SIRIUS devices they are optimally coordinated with each other, have a very compact design and are particularly easy and quick to install and wire up. In addition there is a seamless range of SIRIUS 3RW soft starters available for soft starting in the control cabinet (see Chapter 6 "Soft Starters and Solid-State Switching Devices" "SIRIUS 3RW Soft Starters"). / Siemens IC 0 04

3 Load Feeders and Starters Introduction 3RA6 3RA6 3RA64 3RA65 3RA6 3RM 3RM3 3RK30 age SIRIUS 3RA6 compact starters Integrated functionality of a starter protector, contactor and solid-state overload relay and various functions of optional mountable accessories Can be used for direct starting of standard s up to 3 A 3RA6 direct-on-line starters Up to 5 kw/400 V, weld-free, wide setting range, removable terminals 3RA6 /64 3RA6 reversing starters Up to 5 kw/400 V, weld-free, wide setting range, removable terminals 3RA6 /65 3RA64 direct-on-line starters for IO-Link Up to 5 kw/400 V, weld-free, wide setting range, removable terminals 3RA64 /66 3RA65 reversing starters for IO-Link Up to 5 kw/400 V, weld-free, wide setting range, removable terminals 3RA65 /67 Accessories for 3RA6 direct-on-line and 3RA69 /6 reversing starters Add-on s for AS-Interface 3RA69 /74 Infeed systems for 3RA6 Modular expandability, up to 00 A, terminals up to 70 mm 3RA6 /76 SIRIUS 3RM starters For switching s up to 3 kw (at 400 V) and resistive loads up to 0 A at AC voltages up to 500 V under normal operating conditions Space-saving design (.5 mm wide) 3RM0 direct-on-line starters Direct-on-line starting with solid-state overload protection 3RM0 /9 3RM reversing starters Reversing functionality with solid-state overload protection 3RM /90 3RM Failsafe direct-on-line starters As 3RM0 plus safety-related shutdown 3RM /9 3RM3 Failsafe reversing starters As 3RM plus safety-related shutdown 3RM3 /9 Accessories for 3RM starters 3RM9 3-phase infeed system Device connectors, push-in lugs for wall mounting, spare terminals for main and control circuits 3RM9 3ZY /93 ET 00S starters and safety starters ET 00S starters Completely factory-wired starters for switching and protecting any AC loads, optionally as direct-on-line, reversing or soft starters /9 starters 3RK30 /05 High-Feature starters 3RK30 /0 ower s for ET 00S starters For infeed and monitoring the auxiliary voltages for starters 3RK903- / 0BA00 ET 00S Failsafe starters High-Feature direct-on-line and reversing starters 3RK30 /3 Terminal s for ET 00S starters Mechanical s in which the starter and expansion s are inserted 3RK903 terminal s /06 High-Feature terminal s /0 Failsafe terminal s /5 ower terminal s / Safety s local and ROFIsafe terminal s /5 Safety s local For safety category SIL 3/L e according to IEC 606 or ISO 349-3RK903 /6 Safety s ROFIsafe Sensor and actuator assignment are freely configurable (distributed safety concept) 3RK903 /6 Accessories /7 ET 00S interface s Interface s - With CU - With fail-safe CU - Without CU 6ES7 6AG /3 ET 00S I/O s ower s, reserve s, potential distributor s, digital/analog electronic s Technology s: SSI s, ULSE pulse generators, STE step s, positioning s, counter s, SI interface s, SIWAREX CS, SIMAREX CF, terminal s for power and electronic s 6ES7 6AG 7MH4 ET 00S fail-safe I/O s F power and F electronic s, F terminal s 6ES7 6AG ET 00S IO-Link master s IO-Link 4SI and SIRIUS 4SI electronic s 6ES7 3RK /40 /50 /54 Siemens IC 0 04 /3

4 General data Overview 3RA load feeders Behavior in the event of short circuit EN (VDE 0660 art 0) and IEC make a distinction between two different types of coordination (types "" and ""). Any short circuits that occur are cleared safely by both types of coordination. The only differences concern the extent of the damage caused to the device by a short circuit. Type of coordination "" The load feeder may be non-operational after a short circuit has been cleared. Damage to the contactor or to the overload release is permissible. Type of coordination "" There must be no damage to the overload release or to any other component after a short circuit has been cleared. The load feeder can resume operation without needing to be renewed. At most, welding of the contactor contacts is permissible if they can be disconnected easily without any significant deformation. 3RA reversing starters for snapping onto standard mounting rails or for screw fixing with screw terminals The 3RA fuseless load feeders consist of the 3RV starter protector and the 3RT electromechanical contactor. The devices are electrically and mechanically connected using preassembled assembly kits (link s, wiring kits and standard mounting rail or busbar adapters). Around 500 preassembled 3RA combinations of these innovative 3RT controls and 3RV protection equipment can be ordered for direct-on-line and reversing starting of standard s up to 3 A (approx.5 kw/400 V). In the 3RA load feeder, the 3RV starter protector is responsible for overload and short-circuit protection. Back-up protective devices, such as melting fuses or limiters, are superfluous here, as the starter protector is short-circuit proof up to 50 ka at 400 V. The 3RT contactor is particularly suitable for extremely complex switching tasks requiring the greatest endurance. The 3RA load feeders are available with setting ranges from 0.4 to 3 A in sizes S00 and S0: Tripping times The types of coordination are indicated in the corresponding tables by the symbols shown on orange backgrounds. All 3RA load feeders described here are designed for normal starting, in other words for overload tripping times of less than 0 s (CLASS 0). At rated-load operating temperature the tripping times are shorter, depending on the particular equipment and the setting range. The exact values can be derived from the tripping characteristics of the starter protectors. Connection methods For all 3RA feeders up to 3 A, spring-type connection is available as well as screw terminals. To connect two devices with spring-type terminals, there are plug-in connection s for sizes S00 and S0 which enable very quick mounting of the feeders and a vibration-resistant assembly. To connect a starter protector with screw terminals to a contactor with spring-type terminals there are special hybrid connection s for the sizes S00 and S0. Width Direct-on-line starters/ reversing starters Max. rated I n max mm A kw S00 45/ S0 45/ For threephase s up to The size of the 3RA load feeders is based on the size of the contactor: 3RA S00 S0 of 3RV starter protector S00 S00 ), S0 of 3RT contactor S00 S0 ) The combination of an S00 starter protector with an S0 contactor is possible only for screw connection versions. Operating conditions 3RA load feeders are climate-proof. They are intended for use in enclosed rooms in which no severe operating conditions (such as dust, caustic vapors, hazardous gases) prevail. Suitable covers must be provided for installation in dusty and damp locations. The terminals are indicated in the corresponding tables by the symbols shown on orange backgrounds. /4 Siemens IC 0 04

5 General data 3RA complete units The 3RA fuseless load feeders can be ordered as preassembled complete units for direct-on-line starting (3RA) or for reversing duty (3RA) with screw or spring-type connection. There are control supply voltages available of 50/60 Hz 30 V AC and 4 V DC. A distinction is also drawn between whether the feeder is mounted onto a 35 mm standard mounting rail, on a flat surface using screws, or on a 60 mm busbar 3RA load feeders in the size S0 must be configured on standard mounting rail adapters if high vibration and shock loads (railways, power generation,...) are involved. A vibration and shock kit is available for mounting on busbar adapters. Accessories As the 3RA fuseless load feeders are constructed from 3RV starter protectors and 3RT contactors, the same accessories such as auxiliary switches, undervoltage releases or door-coupling rotary operating mechanisms can be used for the 3RA fuseless load feeders as for these starter protectors and contactors. In particular, certain accessories have been optimized for the fuseless load feeders. They include the top-connected, transverse auxiliary switch on the starter protector, which is available with CO contact or NO contact + NC contact. Special auxiliary switch blocks that can be snapped on from below are available for the contactor. These two accessories enable the fuseless load feeders to be wired simply without having to route cables through the device. Incoming energy supply On the whole four different energy supply possibilities are available (see "3RV9 Infeed System for Load Feeders" on /40). Customer assembly of fuseless load feeders While the preassembled 3RA load feeders can be ordered up to 3 A, combinations up to 40 A (approx..5 kw/400 V) are possible for customer assembly without link s. The standard devices can be combined optimally in terms of both technical specifications and dimensions, thanks to the modular system of the SIRIUS series. The fuseless load feeders can thus be assembled easily by the customer. It is simply necessary to assemble the standard 3RV starter protector, the 3RT contactor and the appropriate assembly kit. For and assembly kits see the "Selection and ordering data" for 3RA direct-on-line starters and 3RA reversing starters. For assembly kits for direct-on-line starting or reversing duty for mounting onto standard mounting rails or busbars see "Selection and ordering data" at "Accessories". For reversing starters size S0 it is imperative to use a standard mounting rail adapter in order to ensure the necessary mechanical strength. A standard mounting rail adapter is not necessary if a busbar adapter is used. The 3RA fuseless load feeders can be used for fuseless load feeders between 3 A and 00 A. The SENTRON 3VL circuit breakers and the SIRIUS 3RT contactors are available for rated s >00 A. Special equipment for customer assembly can be ordered if other rated control supply voltages are required. Assembly kits can be used to facilitate assembly. Customers can also assemble tested combinations of starter protectors with solid-state controls (soft starters, solidstate contactors) and load feeders with additional monitoring and control devices (3RR monitoring relays, SIMOCODE 3UF). For the electrical and mechanical connection of protection equipment and controls there are preassembled assembly kits (link s, wiring kits and standard mounting rail or busbar adapters). The following types of configuration are possible: Direct-on-line/reversing starting (see preassembled 3RA combinations) Wye-delta starting (only customer assembly with link ) Solid-state/soft starting (only customer assembly with link ) For more information and assignment tables for combinations of the 3RA generation for self-assembly see the configuration manual : Self-assembly of fused load feeders The flexible, modular system of SIRIUS also enables the configuration of fused load feeders up to 40 A (approx..5 kw/400 V). Up to 3 A is also available for 45 mm installation widths. Compact 3NW7...- cylindrical fuse holders for IEC fuses size 0 x 3 mm, or 3NW7...-HG holders for Class CC UL fuses, can be used for this purpose. For more information about fuse systems, see Catalog LV 0 "Low-Voltage ower Distribution and Electrical Installation Technology" "SENTRON Safety, Switching, Measuring and Monitoring Devices". Siemens IC 0 04 /5

6 General data Communications integration using IO-Link Load feeders can also be assembled with IO-Link for connection to the higher-level control For each feeder this requires a communication-capable contactor onto which a 3RA7 function is plugged (various versions for direct-on-line, reversing and wye-delta starters). The design of the SIRIUS load feeders permits a group of up to 4 SIRIUS controls to be conveniently connected through the standardized open IO-Link system to a control system, thus reducing wiring work considerably compared to the conventional parallel wiring method. The electrical connection is made using only three standard cables. The function s perform not only the communication (contactor operation and feedback, ready signal) but also the electrical interlocking (for reversing and wye-delta starters) and the timing relay function (wye-delta reversing time). Communication information and control supply voltages are passed on through ribbon cables so that the complete control wiring on the feeder is no longer needed. The monitoring and maintenance of a plant is made considerably easier by transmitting diverse diagnostics data from the function s (e.g. missing main and auxiliary voltage, local disconnection ) through IO-Link to the higher-level control Also, feeders equipped for IO-Link can be conveniently controlled from the control cabinet door using the optional operator panel. More information: IO-Link see Chapter "Industrial Communication" 3RA7 function s see Chapter 3 "Switching Devices Contactors and Contactor Assemblies" "Function Modules". Communications integration through AS-Interface Connection of the load feeders to the higher-level control system is possible not only through IO-Link but also through AS-Interface. The AS-Interface connection is recommended wherever load feeders are used in distributed applications. This solution also requires a communication-capable contactor and a corresponding 3RA7 function (various versions for directon-line, reversing and wye-delta starters). The devices are implemented in A/B technology, making it easy to connect up to 6 feeders to an AS-i master (regardless of whether they are direct-on-line, reversing or wye-delta starters). This results in a significant reduction of wiring compared to the conventional parallel wiring method. The electrical connection is made using standard cables. The function s perform not only the communication (contactor operation and feedback, ready signal) but also the electrical interlocking (for reversing and wye-delta starters) and the timing relay function (wye-delta reversing time). Communication information and control supply voltages are passed on through ribbon cables so that the complete control wiring on the starter is no longer needed. More information: AS-Interface see Chapter "Industrial Communication" 3RA7 function s see Chapter 3 "Switching Devices Contactors and Contactor Assemblies" "Function Modules". Contactors with communication interface Contactors with a communication interface are required for configuring load feeders with a communication interface (AS-i/IO-Link). These contactors are not included as standard in the preassembled 3RA load feeders. A load feeder with communication interface must be assembled therefore from. Complete integration in the automation landscape As the result of the communication connection through IO-Link or AS-i, the SIRIUS load feeders are fully integrated in the automation landscape and can draw on all the advantages of TIA (e.g. integration in the TIA Maintenance Station). Mounting 3RA fuseless load feeders can be supplied: For assembly on TH 35 standard mounting rails according to EN 6075 (depth 5 mm) For assembly on busbar adapters (busbar center-to-center clearance 60 mm, busbar thickness 5 to 0 mm with beveled edges) The fuseless load feeders are also suitable for screw fixing using two 3RV9-0B push-in lugs. The 3RA fuseless load feeders can also be configured with the 3RV9 infeed system (see Chapter 7 "rotection Equipment" " Starter rotectors/circuit Breakers" "SIRIUS 3RV Starter rotectors/circuit Breakers up to 40 A" "Accessories" "3RV9 Infeed System"). /6 Siemens IC 0 04

7 General data Direct-on-line starting For standard rail mounting or screw fixing s S00 and S0 push-in lugs 3RV9-0B (only for screw mounting) push-in lugs 3RV9-0B (only for screw mounting) push-in lugs 3RV9-0B (only for screw mounting) starter protector S00/S0 starter protector S00/S0 starter protector S00/S0 Link 3RA9-DA00 (for S00) 3RA9-AA00 (for S0, AC contactor) 3RA9-BA00 (for S0, DC contactor) Link 3RA9-AA00 for S00 3RA9-AA00 for S0 Link 3RA9-FA00 for S00 3RA9-FA00 for S0 Contactor S00/S0 Contactor S00/S0 Contactor S00/S0 NSB0_009a Left: 3RA load feeder with screw terminals Center: 3RA load feeder with spring-type terminals Right: starter protector combination with screw terminals, with contactor with spring-type terminals push-in lugs 3RV9-0B (only for screw mounting) push-in lugs 3RV9-0B (only for screw mounting) starter protector S00/S0 starter protector S00/S0 / spring-type terminals Link 3RA9-BA00 for S00/S0 and screw terminals 3RA9-GA00 for S00 and spring-type terminals 3RA9-GA00 for S0 and spring-type terminals Link 3RA9-BA00 Solid-state switching device Soft starter S00/S0 / spring-type terminals NSB0_0090a Left: Right: starter protector combination with solid-state switching device with screw terminals starter protector combination with soft starter with spring-type terminals Siemens IC 0 04 /7

8 General data Direct-on-line starting For 60 mm busbar systems s S00 and S0 60 mm busbar adapter for screw terminals US5-5DS0 for S00 US5-5NT0 for S0 60 mm busbar adapter for spring-type terminals US5-5DT for S00 US5-5NT for S0 starter protector S00/S0 Link 3RA9-DA00 for S00 3RA9-AA00 for S0, AC contactor 3RA9-BA00 for S0, DC contactor starter protector S00/S0 Link 3RA9-AA00 for S00 ) 3RA9-AA00 for S0 Contactor S00/S0 Contactor S00/S0 NSB0_009b ) Additional 3RA9-CA00 spacer for height compensation on AC contactors size S0 with spring-type terminals. Left: Right: 3RA load feeder for direct-on-line starting with busbar adapter with screw terminals 3RA load feeder for direct-on-line starting with busbar adapter with spring-type terminals / Siemens IC 0 04

9 General data Reversing duty For standard rail mounting or screw fixing S00 push-in lugs 3RV9-0B (only for screw mounting) push-in lugs 3RV9-0B (only for screw mounting) starter protector S00 starter protector S00 Link 3RA9-DA00 for S00 Link 3RA9-AA00 for S00 3 contactors S00 3 NSB0_009b 4 4 Wiring kit 3RA93-AA Upper wiring Lower wiring 3 connecting clips 4 Mechanical interlock (can be removed if necessary) Left: Right: contactors S00 Wiring kit 3RA93-AA Upper wiring Lower wiring 3 connecting clips 4 Mechanical interlock (can be removed if necessary) 3RA load feeder with screw terminals with push-in lugs with contactors for reversing duty and 3RA93-AA wiring kit for connection of the contactors (incl. mechanical interlocking and connecting clips) 3RA load feeder with spring-type terminals with push-in lugs with contactors for reversing duty and wiring kit 3RA93-AA (incl. mechanical interlocking and connecting clips) Siemens IC 0 04 /9

10 General data Reversing duty For standard rail mounting S0 RH assembly kit for reversing duty and standard rail mounting in size S0 For screw terminals: 3RA93-BB For spring-type terminals: 3RA93-BB ) Comprising: wiring kit standard mounting rail adapters connecting wedges ) Also includes 3RA9-CA00 spacer for height compensation on AC contactors size S0 with spring-type terminals. starter protector S0 / spring-type terminals standard mounting rail adapters 3RA9-AA00 with connecting wedges US99-AA00 Link For screw terminals: 3RA9-AA00 (AC) 3RA9-BA00 (DC) For spring-type terminals: ) 3RA9-AA NSB0_0093c contactors S0 / spring-type terminals Wiring kit For screw terminals: 3RA93-AA For spring-type terminals: 3RA93-AA Upper wiring Lower wiring 3 connecting clips 4 Mechanical interlock (can be removed if necessary) ) Additional 3RA9-CA00 spacer for height compensation on AC contactors size S0 with spring-type terminals 3RA load feeder for reversing duty and standard rail mounting in size S0 (the version with screw terminals is shown in the picture) /0 Siemens IC 0 04

11 Reversing duty For 60 mm busbar systems s S00 and S0 General data RS assembly kit for reversing duty and busbar mounting Screw connection: 3RA93-DB for S00 3RA93-DB for S0 For spring-type connection: 3RA93-DB for S00 3RA93-DB for S0 ) Comprising: wiring kit busbar adapter device holder connecting wedges ) Also includes 3RA9-CA00 spacer for height compensation on AC contactors size S0 with spring-type terminals. 60 mm busbar adapter For screw terminals: US5-5DS0 for S00 US5-5NT0 for S0 For spring-type terminals: US5-5DT for S00 US5-5NT for S0 starter protector S00/S0 / spring-type terminals connecting wedges US99-AA00 Link For screw terminals: 3RA9-DA00 for S00 3RA9-AA00 for S0, AC contactor 3RA9-BA00 for S0, DC contactor For spring-type terminals: 3RA9-AA00 for S00 ) 3RA9-AA00 for S0 60 mm device holder US5-5AS0 4 3 NSB0_0094c contactors S00/S0 / spring-type terminals ) Additional 3RA9-CA00 spacer for height compensation on AC contactors size S0 with spring-type terminals. Wiring kit Screw connection: 3RA93-AA for S00 3RA93-AA for S0 Spring-type connection: 3RA93-AA for S00 3RA93-AA for S0 Upper wiring Lower wiring 3 connecting clips 4 Mechanical interlock (can be removed if necessary) 3RA load feeder for reversing duty and 60 mm busbar in size S00/S0 (the version with screw terminals is shown in the picture) Siemens IC 0 04 /

12 General data scheme Digit of the st - 3rd 4th 5th 6th 7th th 9th 0th th th 3th 4th SIRIUS feeders 3 R A SIRIUS nd generation Type of (direct-on-line starter =, reversing starter = ) (S00 =, S0 = for Design type and connection Rated power at 400 Integrated auxiliary switches of the Operating range/solenoid coil circuit Rated control supply Example 3 R A 0 0 B A 5 A 0 Note: The scheme is presented here merely for information purposes and for better understanding of the logic behind the article numbers. For your orders, please use the article numbers quoted in the catalog in the Selection and ordering data. Benefits The 3RA fuseless load feeders offer a number of benefits: Minimum planning and assembly work and far less wiring with the preassembled complete units (only one article number 3RA) lug-in connectors from the starter protector to all types of SIRIUS controls, for quicker and error-free assembly of feeders with screw and spring-type connection High planning reliability through consistent combination tests for fuseless (400 V according to IEC) and fused configuration (400 V, 500 V and 690 V according to IEC) Comprehensive approvals for use world-wide on request, see Chapter 6 "Appendix" "s and Approvals". High operational reliability through short-circuit breaking capacity of 50 ka with type of coordination "" and "" Uniform accessories for the two sizes S00 and S0 Spring-type connection possible throughout: Enhanced operational reliability (vibration-resistant wiring) and less wiring work thanks to plug-in connections ower loss 5 to 0 % smaller than for comparable devices, hence lower energy consumption Connection of feeders to the control system through standardized system connection (IO-Link and AS-i), for fast integration in TIA and less wiring work / Siemens IC 0 04

13 General data Technical specifications Direct-on-line starters/ reversing starters Mounting dimensions Direct-on-line starters 3RA. H W D Reversing starters 3RA. Connection methods Mounting Control voltage Width W Height H Depth D S00 3RA. S0 3RA. S00 3RA. S0 3RA. mm mm mm mounting rails AC/DC Busbar adapters AC/DC mounting rails AC/DC Busbar adapters AC/DC mounting rails AC DC Busbar adapters AC DC mounting rails AC/DC Busbar adapters AC/DC mounting rails AC/DC Busbar adapters AC/DC mounting rails AC/DC Busbar adapters AC/DC mounting rail AC adapters DC Busbar adapters AC DC mounting rail AC/DC adapters Busbar adapters AC/DC Type 3RA. 3RA. S00 S0 Number of poles 3 3 Mechanics and environment ermissible ambient temperature During operation C During storage and transport C Weight kg ermissible mounting position,5, NSB0_00369 Important: Acc. to DIN 4360 start command "I" at the right or top Shock resistance Acc. to IEC g/ms 6/ (sine pulse) Degree of protection Acc. to IEC I0 Siemens IC 0 04 /3

14 General data Type 3RA. 3RA. S00 S0 Number of poles 3 3 Electrical specifications s IEC , EN (VDE 0660 art 00) IEC , EN (VDE 0660 art 0) IEC , EN (VDE 0660 art 0) Max. rated I n max A 6 3 (= max. rated operational I e ) Rated operational voltage U e V 690 Rated frequency Hz 50/60 Rated insulation voltage U i (pollution degree 3) V 690 Rated impulse withstand voltage U imp kv 6 Trip class (CLASS) Acc. to IEC , EN (VDE 0660 art 0) 0 Rated short-circuit I q at 50/60 Hz 400 V AC according to IEC , EN (VDE 0660 art 0) Types of coordination according to IEC , EN (VDE 0660 art 0) ower loss v max of all main paths Dependent on the rated I n (upper setting range) ka 50 See "Selection and ordering data" Up to.5 A W A W A W A W A W A W A W ower consumption of the solenoid coils for contactors as a function of the standard of the (when coil is cold and U s 50 Hz) AC operation - Closing Up to 4 kw VA kw VA Up to 5.5 kw VA kw VA f Closed Up to 4 kw VA kw VA Up to 5.5 kw VA kw VA f DC operation Closing = W Closed Magnetic coil operating range for contactors x U s Low limit at 55 C 0. x U s -- At 60 C 0.5 x U s -- Endurance of the starter protector Mechanical endurance Operating cycles Electrical endurance Operating cycles Max. switching frequency per hour ( starts) /h 5 Endurance of contactor Mechanical endurance Operating cycles 30 million 0 million Electrical endurance Operating cycles See endurance characteristic curves of the contactors Chapter 3 "Switching Devices Contactors and Contactor Assemblies" Touch protection Acc. to EN 5074 Finger-safe hase failure sensitivity of the starter protector Isolating features of the starter protector Main control and EMER- GENCY-STO switch characteristics of the starter protector and accessories Acc. to IEC , EN (VDE 0660 art 0) Acc. to IEC , EN (VDE 0660 art 0) Acc. to IEC 6004-, EN (VDE 03 art ) Yes Yes Yes (with overvoltage releases of category under conditions of proper use) rotective separation between Acc. to EN , Appendix N V Up to 400 main and auxiliary circuits Mirror contacts for contactors Yes Yes, from main contact to auxiliary NC contact -- /4 Siemens IC 0 04

15 General data Type SIRIUS 3RA load feeders Connection type Conductor cross-sections for main conductors S00 starter protectors, contactors starter protectors, contactors Terminal screw M3, ozidriv size -- Operating devices mm x 0.5 and 3.5 x 0.5 rescribed tightening torque Nm Conductor cross-sections (min./max.), or conductors can be connected Solid and stranded mm x (0.5.5) ) only for contactors, mm x ( ) ), x ( ) mm max. x 4 Finely stranded without end sleeve mm -- x ( ) Finely stranded with end sleeves (DIN 46 T) mm x ( ) ). x ( ) mm x ( ) ) AWG cables, solid or stranded AWG x (0... 6) ) only for contactors, AWG x (... 4) ), x (0... ) AWG x Max. external diameter of the conductor insulation mm Conductor cross-sections for main conductors S0 starter protectors, contactors starter protectors, contactors Terminal screw M4, ozidriv size -- Operating devices mm x 0.5 and 3.5 x 0.5 rescribed tightening torque Nm Conductor cross-sections (min./max.), or conductors can be connected Solid and stranded mm x ( ) ), x ( ) mm x ( ) ) Finely stranded without end sleeve mm -- x ( ) Finely stranded with end sleeves (DIN 46 T) mm x ( ) ), x ( ) mm x ( ) ) mm max. x 0 AWG cables, solid or stranded AWG x (6... ) ), x (... ) AWG x (4... ) ) Max. external diameter of the conductor insulation mm Conductor cross-sections for auxiliary conductors S00/S0 ) If two different conductor cross-sections are connected to one clamping point, both cross-sections must be in the range specified. If identical cross-sections are used, this restriction does not apply. Contactors (basic unit), starter protectors (accessories), contactors (mountable accessories), overload relays Contactors S00 Contactors S0, starter protectors (accessories), contactors (accessories), overload relays Terminal screw M3, ozidriv size -- Operating devices mm x 0.5 and 3.5 x 0.5 rescribed tightening torque Nm Conductor cross-sections (min./max.), or conductors can be connected Solid and stranded mm x ( ) ), x ( ) x ( ) mm x ( ) ), mm Max. x 4 only for contactors S00 Finely stranded without end sleeve mm -- x ( ) x ( ) Finely stranded with end sleeve mm x ( ) ), x ( ) x ( ) mm x ( ) ) AWG cables, solid or stranded AWG x (0... 6) ), x (0... ) x (0... 4) AWG x (... 4) ), AWG x only for contactors S00 Max. external diameter of the conductor insulation mm Siemens IC 0 04 /5

16 3RA direct-on-line starters for snapping onto standard mounting rails or for screw fixing Selection and ordering data 3RA0 400 V AC 3) 3RA0 overload release Direct-on-line start starter protector + Contactor + Link Rated control supply voltage 50/60 Hz 30 V AC for S00, 50 Hz 30 V AC for S0 With screw terminals Screw fixing with push-in lugs each per load feeder is possible ) The starter protector and contactor are mechanically Auxiliary switches ) on the starter protector and Integrated auxiliary switches: Contactor size S00: NO, contactor size S0: NO + NC DT Fuseless load feeders U S* G Type of coordination "" at I q = 50 ka at 400 V (compatible with type of coordination "") 3RV0 3RT0 3RA ) ush-in lugs see "Accessories" on page /37. ) Auxiliary switches see "Accessories" on page /3. 3) The actual starting and rated data of the to be protected must be per U S BA0 5-A0 9 -DA00 A 3RA0-0BA5-A0 unit 4D CA0 A 3RA0-0CA5-A0 unit 4D DA0 A 3RA0-0DA5-A0 unit 4D EA0 A 3RA0-0EA5-A0 unit 4D FA0 A 3RA0-0FA5-A0 unit 4D GA0 A 3RA0-0GA5-A0 unit 4D HA0 A 3RA0-0HA5-A0 unit 4D JA0 A 3RA0-0JA5-A0 unit 4D KA0 A 3RA0-0KA5-A0 unit 4D AA0 A 3RA0-AA5-A0 unit 4D BA0 A 3RA0-BA5-A0 unit 4D CA0 A 3RA0-CA5-A0 unit 4D DA0 A 3RA0-DA5-A0 unit 4D EA0 A 3RA0-EA5-A0 unit 4D S FA0 4-A00 9 -AA00 A 3RA0-FA4-0A0 unit 4D GA0 A 3RA0-GA4-0A0 unit 4D HA0 A 3RA0-HA4-0A0 unit 4D JA0 A 3RA0-JA4-0A0 unit 4D KA0 A 3RA0-KA4-0A0 unit 4D AA0 6-A00 A 3RA0-4AA6-0A0 unit 4D BA0 B 3RA0-4BA7-0A0 unit 4D CA0 7-A00 A 3RA0-4CA7-0A0 unit 4D DA0 A 3RA0-4DA7-0A0 unit 4D EA0 A 3RA0-4EA7-0A0 unit 4D Type of coordination "" at I q = 50 ka at 400 V (the starter protector is compatible with type of coordination "") S00 For load feeders for lower s, see this table at type of coordination "" FA0 5-A0 9 -DA00 A 3RA0-FA5-A0 unit 4D GA0 A 3RA0-GA5-A0 unit 4D HA0 A 3RA0-HA5-A0 unit 4D JA0 6-A0 A 3RA0-JA6-A0 unit 4D KA0 7-A0 A 3RA0-KA7-A0 unit 4D AA0 -A0 A 3RA0-4AA-A0 unit 4D /6 Siemens IC 0 04

17 3RA direct-on-line starters for snapping onto standard mounting rails or for screw fixing 3RA0 400 V AC 3) 3RA0 overload release Direct-on-line start starter protector + Contactor + Link Rated control supply voltage 50/60 Hz 30 V AC for S00, 50 Hz 30 V AC for S0 With spring-type connection Screw fixing with push-in lugs each per load feeder is possible ) The starter protector and contactor are mechanically Auxiliary switches ) on the starter protector and Integrated auxiliary switches: Contactor size S00: NO, Contactor size S0: NO + NC DT Fuseless load feeders U S* G Type of coordination "" at I q = 50 ka at 400 V (compatible with type of coordination "") 3RV0 3RT0 3RA ) ush-in lugs see "Accessories" on page /37. ) Auxiliary switches see "Accessories" on page /3. 3) The actual starting and rated data of the to be protected must be per U S BA0 5-A0 9 -AA00 A 3RA0-0BE5-A0 unit 4D CA0 A 3RA0-0CE5-A0 unit 4D DA0 A 3RA0-0DE5-A0 unit 4D EA0 A 3RA0-0EE5-A0 unit 4D FA0 A 3RA0-0FE5-A0 unit 4D GA0 A 3RA0-0GE5-A0 unit 4D HA0 A 3RA0-0HE5-A0 unit 4D JA0 A 3RA0-0JE5-A0 unit 4D KA0 A 3RA0-0KE5-A0 unit 4D AA0 A 3RA0-AE5-A0 unit 4D BA0 A 3RA0-BE5-A0 unit 4D CA0 A 3RA0-CE5-A0 unit 4D DA0 A 3RA0-DE5-A0 unit 4D EA0 A 3RA0-EE5-A0 unit 4D S FA0 4-A00 9 -AA00 C 3RA0-FE4-0A0 unit 4D GA0 C 3RA0-GE4-0A0 unit 4D HA0 C 3RA0-HE4-0A0 unit 4D JA0 C 3RA0-JE4-0A0 unit 4D KA0 C 3RA0-KE4-0A0 unit 4D AA0 6-A00 A 3RA0-4AE6-0A0 unit 4D BA0 B 3RA0-4BE7-0A0 unit 4D CA0 7-A00 A 3RA0-4CE7-0A0 unit 4D DA0 A 3RA0-4DE7-0A0 unit 4D EA0 A 3RA0-4EE7-0A0 unit 4D Type of coordination "" at I q = 50 ka at 400 V (the starter protector is compatible with type of coordination "") S00 For load feeders for lower s, see this table at type of coordination "" FA0 5-A0 9 -AA00 A 3RA0-FE5-A0 unit 4D GA0 A 3RA0-GE5-A0 unit 4D HA0 A 3RA0-HE5-A0 unit 4D JA0 6-A0 A 3RA0-JE6-A0 unit 4D KA0 7-A0 A 3RA0-KE7-A0 unit 4D AA0 -A0 A 3RA0-4AE-A0 unit 4D Siemens IC 0 04 /7

18 3RA direct-on-line starters for snapping onto standard mounting rails or for screw fixing 3RA0 400 V AC 3) 3RA0 overload release Direct-on-line start starter protector + Contactor + Link Rated control supply voltage 4 V DC With screw terminals Screw fixing with push-in lugs each per load feeder is possible ) The starter protector and contactor are mechanically Auxiliary switches ) on the starter protector and Integrated auxiliary switches: Contactor size S00: NO, contactor size S0: NO + NC DT Fuseless load feeders U S* G Type of coordination "" at I q = 50 ka at 400 V (compatible with type of coordination "") 3RV0 3RT0 3RA ) ush-in lugs see "Accessories" on page /37. ) Auxiliary switches see "Accessories" on page /3. 3) The actual starting and rated data of the to be protected must be per U S BA0 5-BB4 9 -DA00 A 3RA0-0BA5-BB4 unit 4D CA0 A 3RA0-0CA5-BB4 unit 4D DA0 A 3RA0-0DA5-BB4 unit 4D EA0 A 3RA0-0EA5-BB4 unit 4D FA0 A 3RA0-0FA5-BB4 unit 4D GA0 A 3RA0-0GA5-BB4 unit 4D HA0 A 3RA0-0HA5-BB4 unit 4D JA0 A 3RA0-0JA5-BB4 unit 4D KA0 A 3RA0-0KA5-BB4 unit 4D AA0 A 3RA0-AA5-BB4 unit 4D BA0 A 3RA0-BA5-BB4 unit 4D CA0 A 3RA0-CA5-BB4 unit 4D DA0 A 3RA0-DA5-BB4 unit 4D EA0 A 3RA0-EA5-BB4 unit 4D S FA0 4-BB40 9 -BA00 A 3RA0-FA4-0BB4 unit 4D GA0 A 3RA0-GA4-0BB4 unit 4D HA0 A 3RA0-HA4-0BB4 unit 4D JA0 A 3RA0-JA4-0BB4 unit 4D KA0 A 3RA0-KA4-0BB4 unit 4D AA0 6-BB40 A 3RA0-4AA6-0BB4 unit 4D BA0 B 3RA0-4BA7-0BB4 unit 4D CA0 7-BB40 A 3RA0-4CA7-0BB4 unit 4D DA0 A 3RA0-4DA7-0BB4 unit 4D EA0 A 3RA0-4EA7-0BB4 unit 4D Type of coordination "" at I q = 50 ka at 400 V (the starter protector is compatible with type of coordination "") S00 For load feeders for lower s, see this table at type of coordination "" FA0 5-BB4 9 -DA00 A 3RA0-FA5-BB4 unit 4D GA0 A 3RA0-GA5-BB4 unit 4D HA0 A 3RA0-HA5-BB4 unit 4D JA0 6-BB4 A 3RA0-JA6-BB4 unit 4D KA0 7-BB4 A 3RA0-KA7-BB4 unit 4D AA0 -BB4 A 3RA0-4AA-BB4 unit 4D / Siemens IC 0 04

19 3RA direct-on-line starters for snapping onto standard mounting rails or for screw fixing 3RA0 400 V AC 3) 3RA0 overload release Direct-on-line start starter protector + Contactor + Link Rated control supply voltage 4 V DC With spring-type connection Screw fixing with push-in lugs each per load feeder is possible ) The starter protector and contactor are mechanically Auxiliary switches ) on the starter protector and Integrated auxiliary switches: Contactor size S00: NO, Contactor size S0: NO + NC DT Fuseless load feeders U S* G Type of coordination "" at I q = 50 ka at 400 V (compatible with type of coordination "") 3RV0 3RT0 3RA ) ush-in lugs see "Accessories" on page /37. ) Auxiliary switches see "Accessories" on page /3. 3) The actual starting and rated data of the to be protected must be per U S BA0 5-BB4 9 -AA00 A 3RA0-0BE5-BB4 unit 4D CA0 A 3RA0-0CE5-BB4 unit 4D DA0 A 3RA0-0DE5-BB4 unit 4D EA0 A 3RA0-0EE5-BB4 unit 4D FA0 A 3RA0-0FE5-BB4 unit 4D GA0 A 3RA0-0GE5-BB4 unit 4D HA0 A 3RA0-0HE5-BB4 unit 4D JA0 A 3RA0-0JE5-BB4 unit 4D KA0 A 3RA0-0KE5-BB4 unit 4D AA0 A 3RA0-AE5-BB4 unit 4D BA0 A 3RA0-BE5-BB4 unit 4D CA0 A 3RA0-CE5-BB4 unit 4D DA0 A 3RA0-DE5-BB4 unit 4D EA0 A 3RA0-EE5-BB4 unit 4D S FA0 4-BB40 9 -AA00 C 3RA0-FE4-0BB4 unit 4D GA0 C 3RA0-GE4-0BB4 unit 4D HA0 C 3RA0-HE4-0BB4 unit 4D JA0 C 3RA0-JE4-0BB4 unit 4D KA0 C 3RA0-KE4-0BB4 unit 4D AA0 6-BB40 A 3RA0-4AE6-0BB4 unit 4D BA0 B 3RA0-4BE7-0BB4 unit 4D CA0 7-BB40 A 3RA0-4CE7-0BB4 unit 4D DA0 A 3RA0-4DE7-0BB4 unit 4D EA0 A 3RA0-4EE7-0BB4 unit 4D Type of coordination "" at I q = 50 ka at 400 V (the starter protector is compatible with type of coordination "") S00 For load feeders for lower s, see this table at type of coordination "" FA0 5-BB4 9 -AA00 A 3RA0-FE5-BB4 unit 4D GA0 A 3RA0-GE5-BB4 unit 4D HA0 A 3RA0-HE5-BB4 unit 4D JA0 6-BB4 A 3RA0-JE6-BB4 unit 4D KA0 7-BB4 A 3RA0-KE7-BB4 unit 4D AA0 -BB40 A 3RA0-4AE-BB4 unit 4D Siemens IC 0 04 /9

20 3RA direct-on-line starters for 60 mm busbars 3RA0 400 V AC ) 3RA0 overload release Direct-on-line start starter protector + Contactor + Link + Busbar adapter Rated control supply voltage 50/60 Hz 30 V AC for S00, 50 Hz 30 V AC for S0 With screw terminals With busbar adapter The starter protector and contactor are mechanically Auxiliary switches ) on the starter protector and Integrated auxiliary switches: Contactor size S00: NO, Contactor size S0: NO + NC DT Fuseless load feeders U S* G Type of coordination "" at I q = 50 ka at 400 V (compatible with type of coordination "") 3RV0 3RT0 3RA ) Auxiliary switches see "Accessories" on page /3. ) The actual starting and rated data of the to be protected must be per U S BA0 5-A0 9 -DA00 A 3RA0-0BD5-A0 unit 4D CA0 + US 5- A 3RA0-0CD5-A0 unit 4D DA0 5DS0 A 3RA0-0DD5-A0 unit 4D EA0 A 3RA0-0ED5-A0 unit 4D FA0 A 3RA0-0FD5-A0 unit 4D GA0 A 3RA0-0GD5-A0 unit 4D HA0 A 3RA0-0HD5-A0 unit 4D JA0 A 3RA0-0JD5-A0 unit 4D KA0 A 3RA0-0KD5-A0 unit 4D AA0 A 3RA0-AD5-A0 unit 4D BA0 A 3RA0-BD5-A0 unit 4D CA0 A 3RA0-CD5-A0 unit 4D DA0 A 3RA0-DD5-A0 unit 4D EA0 A 3RA0-ED5-A0 unit 4D S FA0 4-A00 9 -AA00 A 3RA0-FD4-0A0 unit 4D GA0 + US 5- A 3RA0-GD4-0A0 unit 4D HA0 5DT0 A 3RA0-HD4-0A0 unit 4D JA0 A 3RA0-JD4-0A0 unit 4D KA0 A 3RA0-KD4-0A0 unit 4D AA0 6-A00 9 -AA00 A 3RA0-4AD6-0A0 unit 4D BA0 + US 5- B 3RA0-4BD7-0A0 unit 4D CA0 7-A00 5NT0 A 3RA0-4CD7-0A0 unit 4D DA0 A 3RA0-4DD7-0A0 unit 4D EA0 A 3RA0-4ED7-0A0 unit 4D Type of coordination "" at I q = 50 ka at 400 V (the starter protector is compatible with type of coordination "") S00 For load feeders for lower s, see this table at type of coordination "" FA0 5-A0 9 -DA00 A 3RA0-FD5-A0 unit 4D GA0 + US 5- A 3RA0-GD5-A0 unit 4D HA0 5DS0 A 3RA0-HD5-A0 unit 4D JA0 6-A0 A 3RA0-JD6-A0 unit 4D KA0 7-A0 A 3RA0-KD7-A0 unit 4D AA0 -A0 A 3RA0-4AD-A0 unit 4D /0 Siemens IC 0 04

21 3RA direct-on-line starters for 60 mm busbars 3RA0 400 V AC ) 3RA0 overload release Direct-on-line start starter protector + Contactor + Link + Busbar adapter Rated control supply voltage 50/60 Hz 30 V AC for S00, 50 Hz 30 V AC for S0 With spring-type connection With busbar adapter The starter protector and contactor are mechanically Auxiliary switches ) on the starter protector and Integrated auxiliary switches: Contactor size S00: NO, Contactor size S0: NO + NC DT Fuseless load feeders U S* G Type of coordination "" at I q = 50 ka at 400 V (compatible with type of coordination "") 3RV0 3RT0 3RA ) Auxiliary switches see "Accessories" on page /3. ) The actual starting and rated data of the to be protected must be 3) A 3RA9-CA00 spacer for height compensation on AC contactors size S0 with spring-type terminals is included in the scope of supply. per U S BA0 5-A0 9 -AA00 A 3RA0-0BH5-A0 unit 4D CA0 + US 5- A 3RA0-0CH5-A0 unit 4D DA0 5DT A 3RA0-0DH5-A0 unit 4D EA0 A 3RA0-0EH5-A0 unit 4D FA0 A 3RA0-0FH5-A0 unit 4D GA0 A 3RA0-0GH5-A0 unit 4D HA0 A 3RA0-0HH5-A0 unit 4D JA0 A 3RA0-0JH5-A0 unit 4D KA0 A 3RA0-0KH5-A0 unit 4D AA0 A 3RA0-AH5-A0 unit 4D BA0 A 3RA0-BH5-A0 unit 4D CA0 A 3RA0-CH5-A0 unit 4D DA0 A 3RA0-DH5-A0 unit 4D EA0 A 3RA0-EH5-A0 unit 4D S FA0 4-A00 9 -AA00 C 3RA0-FH4-0A0 unit 4D GA0 + US 5- C 3RA0-GH4-0A0 unit 4D HA0 5NT 3) C 3RA0-HH4-0A0 unit 4D JA0 C 3RA0-JH4-0A0 unit 4D KA0 C 3RA0-KH4-0A0 unit 4D AA0 6-A00 A 3RA0-4AH6-0A0 unit 4D BA0 B 3RA0-4BH7-0A0 unit 4D CA0 7-A00 A 3RA0-4CH7-0A0 unit 4D DA0 A 3RA0-4DH7-0A0 unit 4D EA0 A 3RA0-4EH7-0A0 unit 4D Type of coordination "" at I q = 50 ka at 400 V (the starter protector is compatible with type of coordination "") S00 For load feeders for lower s, see this table at type of coordination "" FA0 5-A0 9 -AA00 A 3RA0-FH5-A0 unit 4D GA0 + US 5- A 3RA0-GH5-A0 unit 4D HA0 5DT A 3RA0-HH5-A0 unit 4D JA0 6-A0 A 3RA0-JH6-A0 unit 4D KA0 7-A0 A 3RA0-KH7-A0 unit 4D AA0 -A0 A 3RA0-4AH-A0 unit 4D Siemens IC 0 04 /

22 3RA direct-on-line starters for 60 mm busbars 3RA0 400 V AC ) 3RA0 overload release Direct-on-line start starter protector + Contactor + Link + Busbar adapter Rated control supply voltage 4 V DC With screw terminals With busbar adapter The starter protector and contactor are mechanically Auxiliary switches ) on the starter protector and Integrated auxiliary switches: Contactor size S00: NO, Contactor size S0: NO + NC DT Fuseless load feeders U S* G Type of coordination "" at I q = 50 ka at 400 V (compatible with type of coordination "") 3RV0 3RT0 3RA ) Auxiliary switches see "Accessories" on page /3. ) The actual starting and rated data of the to be protected must be per U S BA0 5-BB4 9 -DA00 A 3RA0-0BD5-BB4 unit 4D CA0 + US 5- A 3RA0-0CD5-BB4 unit 4D DA0 5DS0 A 3RA0-0DD5-BB4 unit 4D EA0 A 3RA0-0ED5-BB4 unit 4D FA0 A 3RA0-0FD5-BB4 unit 4D GA0 A 3RA0-0GD5-BB4 unit 4D HA0 A 3RA0-0HD5-BB4 unit 4D JA0 A 3RA0-0JD5-BB4 unit 4D KA0 A 3RA0-0KD5-BB4 unit 4D AA0 A 3RA0-AD5-BB4 unit 4D BA0 A 3RA0-BD5-BB4 unit 4D CA0 A 3RA0-CD5-BB4 unit 4D DA0 A 3RA0-DD5-BB4 unit 4D EA0 A 3RA0-ED5-BB4 unit 4D S FA0 4-BB40 9 -BA00 A 3RA0-FD4-0BB4 unit 4D GA0 + US 5- A 3RA0-GD4-0BB4 unit 4D HA0 5DT0 A 3RA0-HD4-0BB4 unit 4D JA0 A 3RA0-JD4-0BB4 unit 4D KA0 A 3RA0-KD4-0BB4 unit 4D AA0 6-BB40 9 -BA00 A 3RA0-4AD6-0BB4 unit 4D BA0 + US 5- B 3RA0-4BD7-0BB4 unit 4D CA0 7-BB40 5NT0 A 3RA0-4CD7-0BB4 unit 4D DA0 A 3RA0-4DD7-0BB4 unit 4D EA0 A 3RA0-4ED7-0BB4 unit 4D Type of coordination "" at I q = 50 ka at 400 V (the starter protector is compatible with type of coordination "") S00 For load feeders for lower s, see this table at type of coordination "" FA0 5-BB4 9 -DA00 A 3RA0-FD5-BB4 unit 4D GA0 + US 5- A 3RA0-GD5-BB4 unit 4D HA0 5DS0 A 3RA0-HD5-BB4 unit 4D JA0 6-BB4 A 3RA0-JD6-BB4 unit 4D KA0 7-BB4 A 3RA0-KD7-BB4 unit 4D AA0 -BB4 A 3RA0-4AD-BB4 unit 4D / Siemens IC 0 04

23 3RA direct-on-line starters for 60 mm busbars 3RA0 400 V AC ) 3RA0 overload release Direct-on-line start starter protector + Contactor + Link + Busbar adapter Rated control supply voltage 4 V DC With spring-type connection With busbar adapter The starter protector and contactor are mechanically Auxiliary switches ) on the starter protector and Integrated auxiliary switches: Contactor size S00: NO, Contactor size S0: NO + NC DT Fuseless load feeders U S* G Type of coordination "" at I q = 50 ka at 400 V (compatible with type of coordination "") 3RV0 3RT0 3RA ) Auxiliary switches see "Accessories" on page /3. ) The actual starting and rated data of the to be protected must be per U S BA0 5-BB4 9 -AA00 A 3RA0-0BH5-BB4 unit 4D CA0 + US 5- A 3RA0-0CH5-BB4 unit 4D DA0 5DT A 3RA0-0DH5-BB4 unit 4D EA0 A 3RA0-0EH5-BB4 unit 4D FA0 A 3RA0-0FH5-BB4 unit 4D GA0 A 3RA0-0GH5-BB4 unit 4D HA0 A 3RA0-0HH5-BB4 unit 4D JA0 A 3RA0-0JH5-BB4 unit 4D KA0 A 3RA0-0KH5-BB4 unit 4D AA0 A 3RA0-AH5-BB4 unit 4D BA0 A 3RA0-BH5-BB4 unit 4D CA0 A 3RA0-CH5-BB4 unit 4D DA0 A 3RA0-DH5-BB4 unit 4D EA0 A 3RA0-EH5-BB4 unit 4D S FA0 4-BB40 9 -AA00 C 3RA0-FH4-0BB4 unit 4D GA0 + US 5- C 3RA0-GH4-0BB4 unit 4D HA0 5NT C 3RA0-HH4-0BB4 unit 4D JA0 C 3RA0-JH4-0BB4 unit 4D KA0 C 3RA0-KH4-0BB4 unit 4D AA0 6-BB40 A 3RA0-4AH6-0BB4 unit 4D BA0 B 3RA0-4BH7-0BB4 unit 4D CA0 7-BB40 A 3RA0-4CH7-0BB4 unit 4D DA0 A 3RA0-4DH7-0BB4 unit 4D EA0 A 3RA0-4EH7-0BB4 unit 4D Type of coordination "" at I q = 50 ka at 400 V (the starter protector is compatible with type of coordination "") S00 For load feeders for lower s, see this table at type of coordination "" FA0 5-BB4 9 -AA00 A 3RA0-FH5-BB4 unit 4D GA0 + US 5- A 3RA0-GH5-BB4 unit 4D HA0 5DT A 3RA0-HH5-BB4 unit 4D JA0 6-BB4 A 3RA0-JH6-BB4 unit 4D KA0 7-BB4 A 3RA0-KH7-BB4 unit 4D AA0 -BB40 A 3RA0-4AH-BB4 unit 4D Siemens IC 0 04 /3

24 3RA reversing starters for snapping onto standard mounting rails or for screw fixing Selection and ordering data 3RA0 400 V AC 3) 3RA0 overload release Reversing duty starter protectors + contactors + Link + Assembly kit RH 4) /Wiring kit Rated control supply voltage 50/60 Hz 30 V AC for S00, 50 Hz 30 V AC for S0 With screw terminals Screw fixing with push-in lugs each per load feeder is possible ) Without standard mounting rail adapter for size S00 With standard mounting rail adapters for size S0 for mechanical reinforcement (included in the scope of supply) The starter protector and contactor are mechanically Auxiliary switches ) on the starter protector and With the contactor S0, an integrated NO contact is still available for free use. DT Fuseless load feeders U S* G Type of coordination "" at I q = 50 ka at 400 V (compatible with type of coordination "") 3RV0 3RT0 3RA ) ush-in lugs see "Accessories" on page /37. ) Auxiliary switches see "Accessories" on page /3. 3) The actual starting and rated data of the to be protected must be 4) RH = assembly kit for reversing duty and standard rail mounting in size S0. per U S BA0 5-A0 9 -DA00 A 3RA0-0BA5-A0 unit 4D CA AA A 3RA0-0CA5-A0 unit 4D DA0 A 3RA0-0DA5-A0 unit 4D EA0 A 3RA0-0EA5-A0 unit 4D FA0 A 3RA0-0FA5-A0 unit 4D GA0 A 3RA0-0GA5-A0 unit 4D HA0 A 3RA0-0HA5-A0 unit 4D JA0 A 3RA0-0JA5-A0 unit 4D KA0 A 3RA0-0KA5-A0 unit 4D AA0 A 3RA0-AA5-A0 unit 4D BA0 A 3RA0-BA5-A0 unit 4D CA0 A 3RA0-CA5-A0 unit 4D DA0 A 3RA0-DA5-A0 unit 4D EA0 A 3RA0-EA5-A0 unit 4D S FA0 4-A00 9 -AA00 A 3RA0-FB4-0A0 unit 4D GA BB A 3RA0-GB4-0A0 unit 4D HA0 A 3RA0-HB4-0A0 unit 4D JA0 A 3RA0-JB4-0A0 unit 4D KA0 A 3RA0-KB4-0A0 unit 4D AA0 6-A00 A 3RA0-4AB6-0A0 unit 4D BA0 B 3RA0-4BB7-0A0 unit 4D CA0 7-A00 A 3RA0-4CB7-0A0 unit 4D DA0 A 3RA0-4DB7-0A0 unit 4D EA0 A 3RA0-4EB7-0A0 unit 4D Type of coordination "" at I q = 50 ka at 400 V (the starter protector is compatible with type of coordination "") S00 For load feeders for lower s, see this table at type of coordination "". S FA0 5-A0 9 -DA00 A 3RA0-FA5-A0 unit 4D GA AA A 3RA0-GA5-A0 unit 4D HA0 A 3RA0-HA5-A0 unit 4D JA0 6-A0 A 3RA0-JA6-A0 unit 4D KA0 7-A0 A 3RA0-KA7-A0 unit 4D AA0 -A0 A 3RA0-4AA-A0 unit 4D /4 Siemens IC 0 04

25 3RA reversing starters for snapping onto standard mounting rails or for screw fixing 3RA0 400 V AC 3) 3RA0 overload release ) ush-in lugs see "Accessories" on page /37. Reversing duty starter protector Type of coordination "" at I q = 50 ka at 400 V (compatible with type of coordination "") + contactors 3RV0 3RT0 3RA + Link + Assembly kit RH 4) /Wiring kit ) Auxiliary switches see "Accessories" on page /3. 3) The actual starting and rated data of the to be protected must be 4) RH = assembly kit for reversing duty and standard rail mounting in size S0. 5) The RH assembly kit also includes the 3RA9-CA00 spacer for height compensation on AC contactors size S0 with spring-type terminals. Rated control supply voltage 50/60 Hz 30 V AC for S00, 50 Hz 30 V AC for S0 With spring-type connection Screw fixing with push-in lugs each per load feeder is possible ) Without standard mounting rail adapter for size S00 With standard mounting rail adapters for size S0 for mechanical reinforcement (included in the scope of supply) The starter protector and contactor are mechanically Auxiliary switches ) on the starter protector and With the contactor S0, an integrated NO contact is still available for free use. DT Fuseless load feeders per U U S BA0 5-A0 9 -AA00 A 3RA0-0BE5-A0 unit 4D CA AA A 3RA0-0CE5-A0 unit 4D DA0 A 3RA0-0DE5-A0 unit 4D EA0 A 3RA0-0EE5-A0 unit 4D FA0 A 3RA0-0FE5-A0 unit 4D GA0 A 3RA0-0GE5-A0 unit 4D HA0 A 3RA0-0HE5-A0 unit 4D JA0 A 3RA0-0JE5-A0 unit 4D KA0 A 3RA0-0KE5-A0 unit 4D AA0 A 3RA0-AE5-A0 unit 4D BA0 A 3RA0-BE5-A0 unit 4D CA0 A 3RA0-CE5-A0 unit 4D DA0 A 3RA0-DE5-A0 unit 4D EA0 A 3RA0-EE5-A0 unit 4D S FA0 4-A00 9 -AA00 C 3RA0-FF4-0A0 unit 4D GA BB 5) C 3RA0-GF4-0A0 unit 4D HA0 C 3RA0-HF4-0A0 unit 4D JA0 C 3RA0-JF4-0A0 unit 4D KA0 C 3RA0-KF4-0A0 unit 4D AA0 6-A00 A 3RA0-4AF6-0A0 unit 4D BA0 B 3RA0-4BF7-0A0 unit 4D CA0 A 3RA0-4CF7-0A0 unit 4D DA0 7-A00 A 3RA0-4DF7-0A0 unit 4D EA0 A 3RA0-4EF7-0A0 unit 4D Type of coordination "" at I q = 50 ka at 400 V (the starter protector is compatible with type of coordination "") S00 For load feeders for lower s, see this table at type of coordination "". S FA0 5-A0 9 -AA00 A 3RA0-FE5-A0 unit 4D GA AA A 3RA0-GE5-A0 unit 4D HA0 A 3RA0-HE5-A0 unit 4D JA0 6-A0 A 3RA0-JE6-A0 unit 4D KA0 7-A0 A 3RA0-KE7-A0 unit 4D AA0 -A0 A 3RA0-4AE-A0 unit 4D S* G Siemens IC 0 04 /5

26 3RA reversing starters for snapping onto standard mounting rails or for screw fixing 3RA0 400 V AC 3) 3RA0 overload release Reversing duty starter protector + contactors + Link + Assembly kit RH 4) /Wiring kit Rated control supply voltage 4 V DC With screw terminals Screw fixing with push-in lugs each per load feeder is possible ) Without standard mounting rail adapter for size S00 With standard mounting rail adapters for size S0 for mechanical reinforcement (included in the scope of supply) The starter protector and contactor are mechanically Auxiliary switches ) on the starter protector and With the contactor S0, an integrated NO contact is still available for free use. DT Fuseless load feeders U S* G Type of coordination "" at I q = 50 ka at 400 V (compatible with type of coordination "") 3RV0 3RT0 3RA ) ush-in lugs see "Accessories" on page /37. ) Auxiliary switches see "Accessories" on page /3. 3) The actual starting and rated data of the to be protected must be 4) RH = assembly kit for reversing duty and standard rail mounting in size S0. per U S BA0 5-BB4 9 -DA00 A 3RA0-0BA5-BB4 unit 4D CA AA A 3RA0-0CA5-BB4 unit 4D DA0 A 3RA0-0DA5-BB4 unit 4D EA0 A 3RA0-0EA5-BB4 unit 4D FA0 A 3RA0-0FA5-BB4 unit 4D GA0 A 3RA0-0GA5-BB4 unit 4D HA0 A 3RA0-0HA5-BB4 unit 4D JA0 A 3RA0-0JA5-BB4 unit 4D KA0 A 3RA0-0KA5-BB4 unit 4D AA0 A 3RA0-AA5-BB4 unit 4D BA0 A 3RA0-BA5-BB4 unit 4D CA0 A 3RA0-CA5-BB4 unit 4D DA0 A 3RA0-DA5-BB4 unit 4D EA0 A 3RA0-EA5-BB4 unit 4D S FA0 4-BB40 9 -BA00 A 3RA0-FB4-0BB4 unit 4D GA BB A 3RA0-GB4-0BB4 unit 4D HA0 A 3RA0-HB4-0BB4 unit 4D JA0 A 3RA0-JB4-0BB4 unit 4D KA0 A 3RA0-KB4-0BB4 unit 4D AA0 6-BB40 A 3RA0-4AB6-0BB4 unit 4D BA0 B 3RA0-4BB7-0BB4 unit 4D CA0 7-BB40 A 3RA0-4CB7-0BB4 unit 4D DA0 A 3RA0-4DB7-0BB4 unit 4D EA0 A 3RA0-4EB7-0BB4 unit 4D Type of coordination "" at I q = 50 ka at 400 V (the starter protector is compatible with type of coordination "") S00 For load feeders for lower s, see this table at type of coordination "". S FA0 5-BB4 9 -DA00 A 3RA0-FA5-BB4 unit 4D GA AA A 3RA0-GA5-BB4 unit 4D HA0 A 3RA0-HA5-BB4 unit 4D JA0 6-BB4 A 3RA0-JA6-BB4 unit 4D KA0 7-BB4 A 3RA0-KA7-BB4 unit 4D AA0 -BB4 A 3RA0-4AA-BB4 unit 4D /6 Siemens IC 0 04

27 3RA reversing starters for snapping onto standard mounting rails or for screw fixing 3RA0 400 V AC 3) 3RA0 overload release ) ush-in lugs see "Accessories" on page /37. Reversing duty starter protector Type of coordination "" at I q = 50 ka at 400 V (compatible with type of coordination "") + contactors 3RV0 3RT0 3RA9 + Link + Assembly kit RH 4) /Wiring kit ) Auxiliary switches see "Accessories" on page /3. 3) The actual starting and rated data of the to be protected must be 4) RH = assembly kit for reversing duty and standard rail mounting in size S0. Rated control supply voltage 4 V DC With spring-type connection Screw fixing with push-in lugs each per load feeder is possible ) Without standard mounting rail adapter for size S00 With standard mounting rail adapters for size S0 for mechanical reinforcement (included in the scope of supply) The starter protector and contactor are mechanically Auxiliary switches ) on the starter protector and With the contactor S0, an integrated NO contact is still available for free use. DT Fuseless load feeders per U U S BA0 5-BB4 9 -AA00 A 3RA0-0BE5-BB4 unit 4D CA AA A 3RA0-0CE5-BB4 unit 4D DA0 A 3RA0-0DE5-BB4 unit 4D EA0 A 3RA0-0EE5-BB4 unit 4D FA0 A 3RA0-0FE5-BB4 unit 4D GA0 A 3RA0-0GE5-BB4 unit 4D HA0 A 3RA0-0HE5-BB4 unit 4D JA0 A 3RA0-0JE5-BB4 unit 4D KA0 A 3RA0-0KE5-BB4 unit 4D AA0 A 3RA0-AE5-BB4 unit 4D BA0 A 3RA0-BE5-BB4 unit 4D CA0 A 3RA0-CE5-BB4 unit 4D DA0 A 3RA0-DE5-BB4 unit 4D EA0 A 3RA0-EE5-BB4 unit 4D S FA0 4-BB40 9 -AA00 C 3RA0-FF4-0BB4 unit 4D GA BB C 3RA0-GF4-0BB4 unit 4D HA0 C 3RA0-HF4-0BB4 unit 4D JA0 C 3RA0-JF4-0BB4 unit 4D KA0 C 3RA0-KF4-0BB4 unit 4D AA0 6-BB40 A 3RA0-4AF6-0BB4 unit 4D BA0 B 3RA0-4BF7-0BB4 unit 4D CA0 7-BB40 A 3RA0-4CF7-0BB4 unit 4D DA0 A 3RA0-4DF7-0BB4 unit 4D EA0 A 3RA0-4EF7-0BB4 unit 4D Type of coordination "" at I q = 50 ka at 400 V (the starter protector is compatible with type of coordination "") S00 For load feeders for lower s, see this table at type of coordination "". S FA0 5-BB4 9 -AA00 A 3RA0-FE5-BB4 unit 4D GA AA A 3RA0-GE5-BB4 unit 4D HA0 A 3RA0-HE5-BB4 unit 4D JA0 6-BB4 A 3RA0-JE6-BB4 unit 4D KA0 7-BB4 A 3RA0-KE7-BB4 unit 4D AA0 -BB4 A 3RA0-4AE-BB4 unit 4D S* G Siemens IC 0 04 /7

28 3RA reversing starters for 60 mm busbars 3RA0 400 V AC ) 3RA0 overload release Reversing duty starter protector + contactors + Link + Assembly kit RS 3) /Wiring kit Rated control supply voltage 50/60 Hz 30 V AC for S00, 50 Hz 30 V AC for S0 With screw terminals With busbar adapter and device holder (included in the scope of supply) The starter protector and contactor are mechanically Auxiliary switches ) on the starter protector and With the contactor S0, an integrated NO contact is still available for free use. DT Fuseless load feeders U S* G Type of coordination "" at I q = 50 ka at 400 V (compatible with type of coordination "") 3RV0 3RT0 3RA ) Auxiliary switches see "Accessories" on page /3. ) The actual starting and rated data of the to be protected must be 3) RS = assembly kit for reversing duty and busbar mounting per U S BA0 5-A0 9 -DA00 A 3RA0-0BD5-A0 unit 4D CA DB A 3RA0-0CD5-A0 unit 4D DA0 A 3RA0-0DD5-A0 unit 4D EA0 A 3RA0-0ED5-A0 unit 4D FA0 A 3RA0-0FD5-A0 unit 4D GA0 A 3RA0-0GD5-A0 unit 4D HA0 A 3RA0-0HD5-A0 unit 4D JA0 A 3RA0-0JD5-A0 unit 4D KA0 A 3RA0-0KD5-A0 unit 4D AA0 A 3RA0-AD5-A0 unit 4D BA0 A 3RA0-BD5-A0 unit 4D CA0 A 3RA0-CD5-A0 unit 4D DA0 A 3RA0-DD5-A0 unit 4D EA0 A 3RA0-ED5-A0 unit 4D S FA0 4-A00 9 -AA00 A 3RA0-FD4-0A0 unit 4D GA DB A 3RA0-GD4-0A0 unit 4D HA0 A 3RA0-HD4-0A0 unit 4D JA0 A 3RA0-JD4-0A0 unit 4D KA0 A 3RA0-KD4-0A0 unit 4D AA0 6-A00 A 3RA0-4AD6-0A0 unit 4D BA0 B 3RA0-4BD7-0A0 unit 4D CA0 7-A00 A 3RA0-4CD7-0A0 unit 4D DA0 A 3RA0-4DD7-0A0 unit 4D EA0 A 3RA0-4ED7-0A0 unit 4D Type of coordination "" at I q = 50 ka at 400 V (the starter protector is compatible with type of coordination "") S00 For load feeders for lower s, see this table at type of coordination "". S FA0 5-A0 9 -DA00 A 3RA0-FD5-A0 unit 4D GA DB A 3RA0-GD5-A0 unit 4D HA0 A 3RA0-HD5-A0 unit 4D JA0 6-A0 A 3RA0-JD6-A0 unit 4D KA0 7-A0 A 3RA0-KD7-A0 unit 4D AA0 -A0 A 3RA0-4AD-A0 unit 4D / Siemens IC 0 04

29 3RA reversing starters for 60 mm busbars 3RA0 400 V AC ) 3RA0 overload release ) Auxiliary switches see "Accessories" on page /3. Reversing duty starter protectors Type of coordination "" at I q = 50 ka at 400 V (compatible with type of coordination "") + contactors 3RV0 3RT0 3RA ) The actual starting and rated data of the to be protected must be 3) RS = assembly kit for reversing duty and busbar mounting 4) The RS assembly kit also includes the 3RA9-CA00 spacer for height compensation on AC contactors size S0 with spring-type terminals. + Link + Assembly kit RS 3) /Wiring kit Rated control supply voltage 50/60 Hz 30 V AC for S00, 50 Hz 30 V AC for S0 With spring-type connection With busbar adapter and device holder (included in the scope of supply) The starter protector and contactor are mechanically Auxiliary switches ) on the starter protector and With the contactor S0, an integrated NO contact is still available for free use. DT Fuseless load feeders per U U S BA0 5-A0 9 -AA00 A 3RA0-0BH5-A0 unit 4D CA DB A 3RA0-0CH5-A0 unit 4D DA0 A 3RA0-0DH5-A0 unit 4D EA0 A 3RA0-0EH5-A0 unit 4D FA0 A 3RA0-0FH5-A0 unit 4D GA0 A 3RA0-0GH5-A0 unit 4D HA0 A 3RA0-0HH5-A0 unit 4D JA0 A 3RA0-0JH5-A0 unit 4D KA0 A 3RA0-0KH5-A0 unit 4D AA0 A 3RA0-AH5-A0 unit 4D BA0 A 3RA0-BH5-A0 unit 4D CA0 A 3RA0-CH5-A0 unit 4D DA0 A 3RA0-DH5-A0 unit 4D EA0 A 3RA0-EH5-A0 unit 4D S FA0 4-A00 9 -AA00 C 3RA0-FH4-0A0 unit 4D GA DB 4) C 3RA0-GH4-0A0 unit 4D HA0 C 3RA0-HH4-0A0 unit 4D JA0 C 3RA0-JH4-0A0 unit 4D KA0 C 3RA0-KH4-0A0 unit 4D AA0 6-A00 A 3RA0-4AH6-0A0 unit 4D BA0 B 3RA0-4BH7-0A0 unit 4D CA0 A 3RA0-4CH7-0A0 unit 4D DA0 7-A00 A 3RA0-4DH7-0A0 unit 4D EA0 A 3RA0-4EH7-0A0 unit 4D Type of coordination "" at I q = 50 ka at 400 V (the starter protector is compatible with type of coordination "") S00 For load feeders for lower s, see this table at type of coordination "". S FA0 5-A0 9 -AA00 A 3RA0-FH5-A0 unit 4D GA DB A 3RA0-GH5-A0 unit 4D HA0 A 3RA0-HH5-A0 unit 4D JA0 6-A0 A 3RA0-JH6-A0 unit 4D KA0 7-A0 A 3RA0-KH7-A0 unit 4D AA0 -A0 A 3RA0-4AH-A0 unit 4D S* G Siemens IC 0 04 /9

30 3RA reversing starters for 60 mm busbars 3RA0 400 V AC ) 3RA0 overload release Reversing duty starter protectors + contactors + Link + Assembly kit RS 3) /Wiring kit Rated control supply voltage 4 V DC With screw terminals With busbar adapter and device holder (included in the scope of supply) The starter protector and contactor are mechanically Auxiliary switches ) on the starter protector and With the contactor S0, an integrated NO contact is still available for free use. DT Fuseless load feeders U S* G Type of coordination "" at I q = 50 ka at 400 V (compatible with type of coordination "") 3RV0 3RT0 3RA ) Auxiliary switches see "Accessories" on page /3. ) The actual starting and rated data of the to be protected must be 3) RS = assembly kit for reversing duty and busbar mounting per U S BA0 5-BB4 9 -DA00 A 3RA0-0BD5-BB4 unit 4D CA DB A 3RA0-0CD5-BB4 unit 4D DA0 A 3RA0-0DD5-BB4 unit 4D EA0 A 3RA0-0ED5-BB4 unit 4D FA0 A 3RA0-0FD5-BB4 unit 4D GA0 A 3RA0-0GD5-BB4 unit 4D HA0 A 3RA0-0HD5-BB4 unit 4D JA0 A 3RA0-0JD5-BB4 unit 4D KA0 A 3RA0-0KD5-BB4 unit 4D AA0 A 3RA0-AD5-BB4 unit 4D BA0 A 3RA0-BD5-BB4 unit 4D CA0 A 3RA0-CD5-BB4 unit 4D DA0 A 3RA0-DD5-BB4 unit 4D EA0 A 3RA0-ED5-BB4 unit 4D S FA0 4-BB40 9 -BA00 A 3RA0-FD4-0BB4 unit 4D GA DB A 3RA0-GD4-0BB4 unit 4D HA0 A 3RA0-HD4-0BB4 unit 4D JA0 A 3RA0-JD4-0BB4 unit 4D KA0 A 3RA0-KD4-0BB4 unit 4D AA0 6-BB40 A 3RA0-4AD6-0BB4 unit 4D BA0 B 3RA0-4BD7-0BB4 unit 4D CA0 7-BB40 A 3RA0-4CD7-0BB4 unit 4D DA0 A 3RA0-4DD7-0BB4 unit 4D EA0 A 3RA0-4ED7-0BB4 unit 4D Type of coordination "" at I q = 50 ka at 400 V (the starter protector is compatible with type of coordination "") S00 For load feeders for lower s, see this table at type of coordination "". S FA0 5-BB4 9 -DA00 A 3RA0-FD5-BB4 unit 4D GA DB A 3RA0-GD5-BB4 unit 4D HA0 A 3RA0-HD5-BB4 unit 4D JA0 6-BB4 A 3RA0-JD6-BB4 unit 4D KA0 7-BB4 A 3RA0-KD7-BB4 unit 4D AA0 -BB4 A 3RA0-4AD-BB4 unit 4D /30 Siemens IC 0 04