Bulletin 1760, 1761, 1762, 1764, 1769, 1790, 1791 Programmable Controllers Quick Selection Table

Transcription

1 Bulletin 760, 76, 762, 764, 769, 790, 79 Quick Selection Table Bulletin No LSP 764-LRP Type MicroLogix 000 MicroLogix 200 MicroLogix 500 Memory User Program/Data Space K 4K / 2K (max) 3.6K / 4K (max) 0K / 4K (max) configurable configurable configurable Data Logging / Recipe Storage Recipe only (User Program) 48K bytes EEPROM Back-up Battery Back-up Back-up Memory Module Only through hand-held programmer I/O Up to 32 Embedded Embedded Embedded w/local Expansion Up to 28 Embedded w/local Exp. Embedded w/local Expansion Up to 256 Embedded w/local Expansion Thousands of I/O Local & Networked Expansion using 769-SDN Additional Functionality Analog Embedded Expansion Expansion Trim Potentiometers PID High-Speed khz 20 khz Real Time Clock Simple Motion: Pulse Width Modulated/Pulse Train 20 khz 20 khz Single Axis Servo Control Through embedded PTO Through embedded PTO Data Access Tool Data Logging Up to 48K bytes Recipe Storage Uses User Program Memory or 48K Program Memory Data Logging Memory Floating Point Math Programming Software Windows - RSLogix 500 & RSLogix 500 Starter Communications RS-232 Ports () - 8-pin Mini DIN () - 8-pin Mini DIN () - 8-pin Mini () - 8-pin Mini DIN & () DIN - isolated 9 pin D-shell DeviceNet Peer to Peer/Slave w/ 76-NET-DNI w/ 76-NET-DNI w/ 76-NET-DNI or 769-SDN DeviceNet Scanner w/ 769-SDN Ethernet w/ 76-NET-ENI w/ 76-NET-ENI w/ 76-NET-ENI DH-485 w/ 76-NET-AIC w/ 76-NET-AIC w/ 76-NET-AIC DF Half-Duplex Master/Slave Slave only SCADA RTU - Modbus RTU Slave only Slave only ASCII Operating Power 20/240V AC / Standards/Approvals UL, CSA or C-UL, CE, Class I Div. 2 UL, CSA or C-UL, CE, Class I Div. 2 Page Number Page 8 Page 82 Page Rockwell Automation

2 Bulletin 760, 76, 762, 764, 769, 790, 79 Quick Selection Table Type Features I/O Bulletin No D 79D Compact I/O Expansion I/O for MicroLogix 500 Unique, compact, modular, rackless design allowing front insertion and removal of the modules on DIN rail with easy to operate latches Easy change-out of modules due to unique patented bus connector Removable terminal blocks with finger-safe covers Individual point diagnostic LED's for ease of troubleshooting Software keying to prevent incorrect placing of module within the system DeviceNet network adapter supporting AutoBaud and Auto Device replacement ODVA conformance ensures high level of interoperability with other DeviceNet products DeviceNet scanner for cost effective OEM solutions Wide selection of I/O's Up to 30 modules per node 4/2/6 (Voltage & current, RTD, Thermocouple) CompactBlock LDX Distributed I/O CompactBlock I/O for DeviceNet Wide breadth of I/O types that can handle diverse applications Expandable up to 3 digital expansion blocks (64 I/O s) Universal sink/source inputs reduces the number of components to stock and allows flexibility of input types Selectable termination types (D-shell or screw) Easy to connect and configure using modular EDS files ODVA conformance ensures high level of interoperability with other DeviceNet products Analog DeviceNet bases for current, voltage, PT00 and thermocouple execution CompactBlock LDX I/O are also available for other network 24VDC, 20V AC and relay discrete blocks with built-in DeviceNet adapter Cyclic and change-of-state messaging increases network throughput, increases productivity Auto baud rate detection Up to 64 I/O with discrete bases and up to 36 I/O with analog bases 4 & 2 (Voltage /Current/RTD/Thermocouple) 0-30V DC device power accommodates a broad range of applications IEC/NEMA Type 3+ inputs offers widest range of compatible sensors Removable terminal blocks reduces maintenance cost Output short-circuit protection Hardware watchdog function Includes DeviceLogix Smart Component Technology enabling localized, simple control functions Compact size of I/O block Autobaud detection Rotary node address switches Selectable input filters Change-of-state operation ODVA conformance ensures high level of interoperability with other DeviceNet products RIO and other network bases are also available Up to 32 I/O with expansion block Analog Inputs/Outputs 4/2 (Voltage /Current) Software RSNetworx for DeviceNet RSNetworx for DeviceNet RSNetworx for DeviceNet Mounting Horizontal Panel or DIN rail Horizontal / Vertical Panel or DIN rail Horizontal / Vertical Panel or DIN mounted mounted rail mounted Operating Power 20V AC / 240V AC / 20V AC / Standards/Approvals UL/cUL Listed, CE certified UL/cUL Listed, CE certified UL/cUL Listed, CE certified Page Number Page 84 Page 89 Page 9 Rockwell Automation 79

3 Bulletin 760, 76, 762, 764, 769, 790, 79 Quick Selection Table Type Bulletin No. 760 Pico Controllers Simplicity, performs basic PLC functions, such as logic, timing and counting. Any user can write simple programs or make data adjustments Intelligent relay replacement, Changing system functions is a simple matter of reprogramming Pico. No rewiring necessary! Real-time clock functionality Features Analog inputs Programs are stored in non-volatile EEPROM memory Commisioning status display View the real-time analysis of the logic circuit Relay outputs, reduce panel space and system cost with high current relay outputs that eliminate interposing relays Memory EEPROM I/O Up to 38 I/O with expansion module Analog Inputs/Outputs 2 x 0 0V (Input) Real Time Clock Programming Software PicoSoft configuration software or via the LCD and Keypad Mounting DIN-rail or panel mounted, Operating Power 20V/240V AC / 2V and Standards/Approvals UL/cUL Listed, CE certified Page Number Page Rockwell Automation

4 MicroLogix 000 Bulletin 760, 76, 762, 764, 769, 790, 79 Product Selection: 76 Memory Size and Type: K EEPROM (approximately 737 instruction words, 437 data words) Data Elements: 52 internal bits, 40 timers, 32 counters, 6 control files, 05 integer files, 33 diagnostic status Throughput:.5 ms (for a typical 500-instruction program) Controller Power and I/O Configuration Line Power Inputs Outputs High Speed I/O Cat. No. PQ 20/240V AC (0) 20V AC (6) Relay N/A 76-L6AWA 20/240V AC (20) 20V AC (2) Relay N/A 76-L32AWA 20/240V AC (2) 20V AC, (4) Analog (8) Relay, () Analog N/A 76-L20AWA-5A 20/240V AC (6) (4) Relay () 6.6 khz input 76-L0BWA 20/240V AC (0) (6) Relay () 6.6 khz input 76-L6BWA 20/240V AC (2), (4) Analog (8) Relay, () Analog () 6.6 khz input 76-L20BWA-5A 20/240V AC (20) (2) Relay () 6.6 khz input 76-L32BWA 20/240V AC (20) 20V AC (0) Triac, (2) Relay ➊ N/A 76-L32AAA 20/240V AC (0) 24V ac or dc (6) Relay N/A 76-L6NWA (6) (4) Relay () 6.6 khz input 76-L0BWB (0) (6) Relay () 6.6 khz input 76-L6BWB (2) (8) Relay () 6.6 khz input 76-L20BWB-5A (2) Relay () 6.6 khz input 76-L32BWB (2) MOSFET sourcing, (2) relay ➊ () 6.6 khz input 76-L0BXB (4) MOSFET sourcing, (2) relay ➊ () 6.6 khz input 76-L6BBB (0) MOSFET sourcing, ( 2) relay ➊ () 6.6 khz input 76-L32BBB (0) 24V AC or DC (6) Relay N/A 76-L6NWB ➊ Two isolated relays per unit. Hand-Held Programmer and Connecting Cable The HHP allows you to create, edit, monitor, and troubleshoot Instruction List (Boolean) programs for your MicroLogix 000 controller. This device also allows you to store programs and to transfer programs through the use of an optional removable memory module. Description Length Cat. No. PQ Hand-Held Programmer 76-HHP-B30 Connecting Cable 2 m 76-CBL-HM02 Programming Software, Network Interface Devices and Cables see Page 87 See Publication 76-SO00A-US-P, Publication 76-TD00A-EN-P for complete product information Rockwell Automation 8

5 Bulletin 760, 76, 762, 764, 769, 790, 79 Product Selection: 762 MicroLogix 200 Memory Size and Type: 6K flash memory: 4K user program, 2K user data Data Elements: Configurable, user-defined file structure, 2K max. data size Throughput: 2 ms (for a typical K word user program) Controller Power and I/O Configuration Line Power Inputs Outputs High Speed I/O Cat. No. PQ 20/240V AC (4) 20V AC (0) Relay N/A 762-L24AWA 20/240V AC (24) 20V AC (6) Relay N/A 762-L40AWA 20/240V AC (0) Standard (4) Fast (0) Relay (4) 20 khz input 762-L24BWA (20) Standard 20/240V AC (6) Relay (4) 20 khz input 762-L40BWA (4) Fast (5) Relay (0) Standard (4) 20 khz input (4) Standard FET 762-L24BXB (4) Fast () 20 khz output () Fast FET Memory and Real-Time Clock Modules Expansion I/O Modules (20) Standard (4) Fast Memory Module Memory and Real-Time Clock Module Real-Time Clock Module (8) Relay (7) Standard FET () Fast FET (4) 20 khz input () 20 khz output Programming Software, Network Interface Devices and Cables see Page 87 See Publication 762-SO00A-US-P, Publication 762-TD00A-EN-P for complete product information 762-L40BXB User program and data back-up Program compare Data file protection Memory module write protection Removal/insertion under power Memory back-up and real-time clock combination module 762-MM 762-MMRTC 762-RTC 8-point 20V AC input 762-IA8 8-point sink/source input 762-IQ8 6-point sink/source input 762-IQ6 8-point AC triac output 762-OA8 8-point sourcing output 762-OB8 6-point sourcing output 762-OB6 8-point AC/DC relay output 762-OW8 6-point AC/DC relay output 762-OW6 4-channel analog voltage/current input 762-IF4 2-channel analog voltage/current input, 2-channel analog voltage/current output 762-IF2OF2 4-channel thermocouple/mv input module 762-IT4 4-channel RTD/resistance input module 762-IR4 82 Rockwell Automation

6 MicroLogix 500 Bulletin 760, 76, 762, 764, 769, 790, 79 Product Selection: 764 Memory Size and Type: If using 764-LSP processor: 7K user memory (total user program plus data). If using 764-LRP processor: 4K user memory (total user program plus data) Data Elements: Configurable, user-defined file structure, 4K max. data size Throughput: ms (for a typical K word user program) Base Unit with embedded I/O and Communication Port RS 232 (8-pin Mini DIN) Base Units: Controller Power and I/O Configuration Line Power Inputs Outputs High Speed I/O Cat. No. PQ 20/240V AC Processors (2) 20V AC (2) Relay, 2 isolated relays per unit N/A AWA (8) Standard (4) Fast (2) Relay, 2 isolated relays per unit (4) 20 khz input BWA (6) Relay, 2 isolated relays per unit (8) Standard 24V (8) 20 khz input (4) Standard 24V dc FET (8) Fast (2) 20 khz output (2) Fast 24V dc FET BXB Processor Unit with 4K User and 48K Data Logging Memory and 2nd Comms port (9-pin D-Shell) 764-LRP Processor Unit with 7K User Memory 764-LSP Memory and Real-Time Clock Modules User programs and data to be stored as backup Transport programs for use with other controllers Safety/security for press control and other critical applications Auto recovery, through a power cycle, after a controller fault Comparison of programs Data file and memory module write protection Real-Time Clock not applicable 764-RTC Memory Module 8K 764-MM Memory Module and Real-Time Clock 8K 764-MMRTC Memory Module 6K 764-MM2 ➊ Memory Module and Real-Time Clock 6K 764-MM2RTC ➊ Data Access Tool Direct access to 48 bit elements Direct access to 48 integer elements Two function keys Display of controller faults Removal/Insertion under Power 764-DAT ➊ For the 764-LRP processor to support larger program and data requirements Programming Software, Network Interface Devices and Cables see Page 87 See Publication 764-SO00A-US-P, Publication 764-TD00A-EN-P for complete product information Rockwell Automation 83

7 Bulletin 760, 76, 762, 764, 769, 790, 79 Product Selection: 769 Compact I/O Expansion I/O for MicroLogix 500 Compact Digital AC Input Modules ➊ Expansion I/O Modules for MicroLogix 500 Number of Inputs Voltage Category Commons per Module Bus Current Draw (max.) Cat. No. PQ ma at 5V DC 769-IA8I 00/20V AC 6 5 ma at 5V DC 769-IA /240V AC 00 ma at 5V DC 769-IM2 Compact Digital AC Output Modules ➊ Number of Outputs 8 6 Voltage Category Commons per Module V AC 2 Max. Current per Output 0.25A at 60 C 0.5A at 30 C Max. Current per Module 2.0 A at 60 C 4.0 A at 30 C 4.0 A at 60 C 8.0 A at 30 C Bus Current Draw (max.) Cat. No. 45 ma at 5V DC 769-OA8 225 ma at 5V DC 769-OA6 PQ Compact Digital DC Input Modules ➊ Number of Inputs Voltage Category/Type, Input Commons per Module Bus Current Draw (max.) Cat. No. PQ ma at 5V DC 769-IQ6 6, sinking or sourcing 2 00mA at 5V DC 769-IQ6F ma at 5V DC 769-IQ32 Compact Digital DC Output Modules ➊ Number of Voltage Category/ Commons Max. Current Max. Current Bus Current Draw Cat. No. Outputs Type, Input per Module per Output per Module (max.) C 60 C 45 ma at 5V DC 769-OB C 200 ma at 5V DC 769-OB6, 6 30 C sourcing 60 ma at 5V DC 769-OB6P 60 C 60 C ma at 5V DC 30 C 30 C, 60 C ma at 5V DC 769-OV6 sinking 30 C Compact Relay Output Modules ➊ Number of Voltage Category/ Max. Current per Max. Current per Bus Current Draw (max.) Outputs Type, Input Output Module at 5V DC at Cat. No C 6 A 25 ma 00 ma 769-OW8 30 C 6 A 25 ma 00 ma 769-OW8I A 20 A 205 ma 80 ma 769-OW6 ➊ Power Supply Distance Rating = 8. The maximum distance an I/O module may be located from the power supply is 8 modules. (Exception for 769-OB32 the Power Supply Distance Rating = 6) PQ PQ See Publication 769-SG002B-EN-P, Publication 769-TD00E-EN-P for complete product information 84 Rockwell Automation

8 Compact I/O Expansion I/O for MicroLogix 500, continued Combination Input and Output Modules ➊ Description DC (sink/ source) inputs AC/DC Relay outputs Voltage Category 5 265V AC 5 25V DC Number of I/O 6 inputs 4 outputs Commons per Module Bulletin 760, 76, 762, 764, 769, 790, 79 Max. Current per Output Max. Current per Module N/A N/A 2.5 A 8 A Product Selection: 769 Bus Current Draw (max.) Cat. No. PQ at 5V DC at 05 ma 50 ma 769-IQ6XOW4 Analog I/O Modules ➊ Description 4-bit current/ voltage input module 8-bit combination input/ output module Input Channels per Module Output Channels per Module Bus Current Draw (max.) at 5V DC at Cat. No. 4 differential or single-ended N/A 20 ma 60 ma 769-IF4 N/A 2 single-ended 20 ma 20 ma 769-OF2 4 differential or single-ended 2 single-ended 20 ma 60 ma 769-IF4XOF2 PQ Temperature and PT00 Input Modules ➊ Description Input Channels per Module Bus Current Draw (max.) Cat. No. PQ Supports thermocouple and millivolt signal measurement 2 CJC sensors 40 ma at 6 input channels plus 00 ma at 5V DC 769-IT6 Supports RTD and direct resistance 00 ma at 5V DC 6 input channels 769-IR6 signal measurement 45 ma at High-Speed Counter Module ➋ Description MHz High-Speed Counter/ Encoder Module Communication Modules ➋ Input Channels per Module (4) single-input counters, or (2) quadrature (ABZ) differential inputs -30 to +30V DC Output Channels per Module (4) 5 to 30V DC sourcing outputs Bus Current Draw (max.) Cat. No. 425 ma at 5V DC 769-HSC PQ Description Bus Current Draw (max.) Cat. No. PQ Compact DeviceNet Scanner Module 440 ma at 5V DC 769-SDN Compact DeviceNet Adapter Module 500 ma at 5V DC 769-ADN/B ➌ Power Supplies Power Supply Voltage Nominal Input Voltagity (0 55 C) Output Bus Current Capac- Cat. No. 85 to 265V AC (no jumper DIP switch required) 20V or 240V AC 2 5V DC 769-PA2 47 to 63 Hz to 3.2V DC 769-PB2 85 to 32V AC (70 to 265 or switch selectable) 20V or 240V AC 4 5V DC 769-PA4 9.2 to 3.2V DC PB4 ➊ Power Supply Distance Rating = 8. The maximum distance an I/O module may be located from the power supply is 8 modules. ➋ Power Supply Distance Rating = 4. The maximum distance an I/O module may be located from the power supply is 4 modules ➌ The series A 769-ADN adapter does not support the 769-OA6, 769-OW6, 769-IF4XOF2, or 769-HSC modules. See Publication 769-SG002B-EN-P, Publication 769-TD00E-EN-P for complete product information PQ Rockwell Automation 85

9 Bulletin 760, 76, 762, 764, 769, 790, 79 Product Selection: 769 Compact I/O Expansion I/O for MicroLogix 500 Vertical Orientation Horizontal Orientation Expansion I/O Bank CRRx ➊ Expansion Cable Expansion I/O Bank CRRx ➊ Expansion Cable Expansion I/O Bank 769-ECL End Cap Expansion I/O Bank ➊ The x in this catalog number can be either a or a 3 representing the length of the cable: = foot (305 mm) and 3 = 3.28 feet ( meter). Expansion Cables Cable Type Length Cat. No. PQ Right bank-to-right bank 305 mm 769-CRR Right bank-to-right bank m 769-CRR3 Right bank-to-left bank 305 mm 769-CRL Right bank-to-left bank m 769-CRL3 End Caps Right end cap Left end cap 769-ECR 769-ECL See Publication 769-SG002B-EN-P, Publication 769-TD00E-EN-P for complete product information 86 Rockwell Automation

10 Accessories for MicroLogix 000, 200 and 500 Bulletin 760, 76, 762, 764, 769, 790, 79 Accessories: 76, 762, 764 Programming Software The RSLogix 500 ladder logic programming package helps you maximize performance, save project development time, and improve productivity. This product has been developed to operate on Windows 98 and above operating system. RSLogix 500 can be used for programming both the SLC 500 and MicroLogix controller families. RSLogix 500 Standard Edition Programming Software for SLC 500 and MicroLogix controller families. (CD-ROM) 9324-RL0300ENE RSLogix 500 Starter Edition Progr. Software for MicroLogix controller families. (CD-ROM) 9324-RL000ENE RSLogix 500 Professional Edition. CD-ROM also includes RSLogix Emulate 500, RSNetworx for DeviceNet and RSNetworx for ControlNet RL0700NXENE Programming Cable for MicroLogix 000, 200, and 500 Channel 0 (8-pin Mini DIN) Cable to connect MicroLogix controller to an IBM compatible PC Description Length Cable Type Cat. No. PQ 2 m 8-pin Mini DIN to 9-pin D Shell 76-CBL-PM02 Programming Cable for MicroLogix 500 with 764-LRP Processor, Channel (9-pin RS-232) Description Length Cable Type Cat. No. PQ Cable to connect port to the 9-Pin DTE port of a personal computer Cable to connect the MicroLogix 500 base port to an IBM compatible PC 3 m 2 m 9-pin D Shell to 9-pin D Shell 747-CP3 9-pin D Shell to 8- pin Mini DIN 76-CBL-PM02 Rockwell Automation 87

11 Bulletin 760, 76, 762, 764, 769, 790, 79 Accessories: 76, 762, 764 Accessories for MicroLogix 000, 200 and 500, continued Network Interface Devices DH-485 RS Pin Mini DIN DeviceNet Ethernet RS Pin Mini DIN RS Pin D-Shell RS Pin Mini DIN 76-NET-AIC 76-NET-DNI 76-NET-ENI AIC+ Advanced Interface Converter: The AIC+ provides an interface to DH-485 networks from an RS-232 port. It can be used with all 76-NET-AIC MicroLogix controllers, SLC 5/03 and higher, and a number of PanelView terminals. DNI DeviceNet Interface: Peer-to-peer messaging between MicroLogix controllers and other devices using the DF Full-Duplex 76-NET-DNI protocol (real time communications no polling required) ENI Ethernet Interface: 76-NET-ENI The ENI provides EtherNet/IP connectivity for all MicroLogix controllers and other DF Full-Duplex devices. The ENIW provides also a basic level of Web Server functionality including: Ability to display dynamically updated data values 76-NET-ENIW Ability to label data values Ability to modify data values (password protected) Network Cable Use the communication cables listed below with MicroLogix 000, 200 and 500 controllers. Cables come in several lengths and connector styles to provide connectivity between MicroLogix controllers and other devices. Description Connectors Length Cat. No. PQ Used to connect MicroLogix controller to Port 2 of 76-NET-AIC+ or 76-NET-DNI or 76-HHP or PanelView Used to connect MicroLogix 500 Processor (LRP) or Port of 76-NET-AIC+ to 9-pin DTE of Personal Computer Used to connect MicroLogix controller to Port of 76-NET-AIC+ or MicroLogix controller to PC or PanelView's to MicroLogix controller 8-pin Mini DIN to 8-pin Mini DIN 9-pin D Shell to 9-pin D Shell 8-pin Mini DIN to 9-pin D Shell 0.5 m 76-CBL-AM00 2 m 76-CBL-HM02 5 m 27-CBL-HM05 0 m 27-CBL-HM0 0.5 m 76-CBL-AC00 3 m 747-CP3 0.5 m 76-CBL-AP00 2 m 76-CBL-PM02 5 m 27-CBL-PM05 0 m 27-CBL-PM0 88 Rockwell Automation

12 CompactBlock LDX I/O Blocks Discrete I/O DeviceNet Bases PROFIBUS Bases Expansion Block I/O Bulletin 760, 76, 762, 764, 769, 790, 79 Product Selection: 790D DNet LDX, 6 sourcing output base, D-shell connector 790D-0B6 DNet LDX,, 6 sinking output base, D-shell connector 790D-0V6 DNet LDX, 6 relay output base, D-shell connector 790D-0W6 DNet LDX,, 6 universal input base, D-shell 790D-6BV0 DNet LDX,, 8 univ In/8 source output base, D-shell 790D-8BV8B DNet LDX,, 8 univ In/8 sink output base, D-shell 790D-8BV8V DNet LDX,20V AC, 6 output base, terminal block 790D-T0A6 DNet LDX,, 6 source output base, terminal block 790D-T0B6 DNet LDX,, 6 sinking output base, terminal block 790D-T0V6 DNet LDX, 6 relay output base, terminal block 790D-T0W6 DNet LDX,, 6 universal input base, terminal block 790D-T6BV0 DNet LDX, 20V AC, 8 input base, terminal block 790D-T8A0 DNet LDX,, 8 univ in/8 source output base, terminal block 790D-T8BV8B DNet LDX,, 8 univ in/8 sink output base, terminal block 790D-T8BV8V PROFIBUS, 6 relay out base, terminal block 790P-T0W6 PROFIBUS,, 8 univ in/8 sink out base, terminal block 790P-T8BV8V PROFIBUS,, 8 univ in/8 source out base, terminal block 790P-T8BV8B LDX I/O,, 6 source out expansion, D-shell 790-0B6X LDX I/O,, 6 sink out expansion, D-shell 790-0V6X LDX I/O, 8 relay out, expansion, D-shell 790-0W8X LDX I/O,, 6 universal in expansion, D-shell 790-6BV0X LDX I/O,, 8 univ in/8 source out expansion, D-shell 790-8BV8BX LDX I/O,, 8 univ in/8 sink out expansion, D-shell 790-8BV8VX LDX I/O,20V AC, 8 output expansion module, terminal block 790-T0A8X LDX I/O,, 6 source out expansion, terminal block 790-T0B6X LDX I/O,, 6 sink out expansion, terminal block 790-T0V6X LDX I/O, 8 relay out, expansion, terminal block 790-T0W8X LDX I/O,, 6 universal in expansion, terminal block 790-T6BV0X LDX I/O,20V AC, 8 input expansion module, terminal block 790-T8A0X LDX I/O,, 8 univ in/8 source out expansion, terminal block 790-T8BV8BX LDX I/O,, 8 univ in/8 sink out expansion, terminal block 790-T8BV8VX See Publication 790-PP002C-EN-P, Publication 790D-TD00A-EN-P for complete product information Small, easy expandable block I/O products with universal sink/source inputs Digital bases support up to 3 discrete expansion blocks ( 64 I/O s) and analog bases support up to 2 discrete expansion blocks Cost-effective I/O product line for light industrial and commercial automation Selectable terminations (D-shell or screw terminations) Wide breadth of I/O s including discrete, analog, thermopcouple and RTD bases for different networks and discrete expansion blocks Rockwell Automation 89

13 Bulletin 760, 76, 762, 764, 769, 790, 79 Product Selection: 790D CompactBlock LDX I/O Blocks, continued Analog I/O DeviceNet Bases DNet LDX, 4 input RTD base, D-shell connector 790D-4R0 DNet LDX, 4 input thermocouple base, D-shell connector 790D-4T0 DNet LDX, 2 output analog current base, D-shell connector 790D-N0C2 DNet LDX, 2 output voltage analog base, D-shell connector 790D-N0V2 DNet LDX, 4 input analog current base, D-shell connector 790D-N4C0 DNet LDX, 4 input voltage analog base, D-shell connector 790D-N4V0 DNet LDX, 4 input RTD base, terminal block 790D-T4R0 DNet LDX, 4 input thermocouple base, terminal block 790D-T4T0 DNet LDX, 2 output analog current base, terminal block 790D-TN0C2 DNet LDX, 2 output voltage analog base, terminal block 790D-TN0V2 DNet LDX, 4 input analog current base, terminal block 790D-TN4C0 DNet LDX, 4 input voltage analog base, terminal block 790D-TN4V0 PROFIBUS Bases PROFIBUS, 4 input RTD base, terminal block 790P-T4R0 PROFIBUS, 4 input thermocouple base, terminal block 790P-T4T0 PROFIBUS, 2 output analog current base, terminal block 790P-TN0C2 PROFIBUS, 4 input analog current base, terminal block 790P-TN4C0 Optional Components LDX I/O replacement ribbon cable, 7cm (lots of 5) 790-7CMCBL LDX I/O longer ribbon cable, 5cm (lots of 5) 790-5CMCBL 5-position open style plug for DNet 799-DNETCON 5-position open style plug/locking screws for DNet 799-DNETSCON DNet 5-position open plug to 5-pin micro male connector, straight (lots of 5) 799-DNC5MMS See Publication 790-PP002C-EN-P, Publication 790D-TD00A-EN-P for complete product information 90 Rockwell Automation

14 Remote I/O Bases (RIO) PROFIBUS Bases Universal Expansion Blocks ➊ Optional Components Bulletin 760, 76, 762, 764, 769, 790, 79 ➊ Universal expansion blocks function with DeviceNet, RIO and PROFIBUS Bases expansion per base block. See Publication 79D-PP002D-EN-P, Publication 79D-TD00D-EN-P for complete product information for complete product information Product Selection: 79D CompactBlock I/O for DeviceNet Low Cost, Compact size Accommodates a broad range of I/O applications up to 32 I/O including analog expansion blocks Easy to install and use Removable terminal blocks to save maintenance cost Output short-circuit protection No software is needed to configure RIO blocks, done via DIP switches Includes DeviceLogix Smart Component Technology enabling localized, simple control functions for faster sense-to-actuation times Discrete I/O DeviceNet Bases DNet, CompactBlock I/O, 6 out source, base 79D-0B6P DNet, CompactBlock I/O, 8 out source, base 79D-0B8P DNet, CompactBlock I/O, 6 out sink, base 79D-0V6P DNet, CompactBlock I/O, 6 in sink, base 79D-6B0 DNet, CompactBlock I/O, 6 in source, base 79D-6V0 DNet, CompactBlock I/O, 4 in sink (not expandable) 79D-4B0 DNet, CompactBlock I/O, 4 in sink/4 out source, base 79D-4B4P DNet, CompactBlock I/O, 8 in sink/8 out source, base 79D-8B8P DNet, CompactBlock I/O, 8 in source/8 out sink, base 79D-8V8P RIO, CompactBlock I/O, 6 out source, base 79R-0B6P RIO, CompactBlock I/O, 6 in sinking, base 79R-6B0 RIO, CompactBlock I/O, 4 in sink/4 out source, base 79R-4B4P RIO, CompactBlock I/O, 8 in sink/8 out source, base 79R-8B8P RIO, CompactBlock I/O, 8 in source/8 out sink, base 79R-8V8P PROFIBUS, CompactBlock I/O, 6 out sourcing, base 79P-0B6P PROFIBUS, CompactBlock I/O, 6 in sinking, base 79P-6B0 PROFIBUS, CompactBlock I/O, 4 in sink/4 out source, base 79P-4B4P PROFIBUS, CompactBlock I/O, 8 in sink/8 out source, base 79P-8B8P PROFIBUS, CompactBlock I/O, 8 in source/8 out sink, base 79P-8V8P CompactBlock I/O Expansion, 6 out source 79D-0B6PX CompactBlock I/O Expansion, 6 out sink 79D-0V6PX CompactBlock I/O Expansion, 6 in sink 79D-6B0X CompactBlock I/O Expansion, 6 in source 79D-6V0X Analog CompactBlock I/O Expansion, 4 inputs, 2 outputs 79D-N4CV2X Block I/O longer ribbon cable, 5 cm 79D-5CMCBL Block I/O replacement ribbon cable, 4 cm 79D-4CMCBL Block I/O replacement terminal block, 2-pin NEMA 79D-RTBN2 RIO 6-position connector, lock screws 79R-RIOSCON Rockwell Automation 9

15 Bulletin 760, 76, 762, 764, 769, 790, 79 Product Selection: 760 Pico Controllers Controllers Line Power Expansion Modules Inputs Outputs Analog Outputs Real-Time Clock Display and Keypad Cat. No. Yes Yes 760-L2AWA 20/ 8 (20/240V AC) 4 (relay) ➌ No Yes 760-L2AWA-NC No 240V AC Yes No 760-L2AWA-ND 2 (20/240V AC 6 (relay) ➌ Yes Yes 760-L8AWA-EX ➊ Yes Yes 760-L2BWB 8 () ➋ 4 (relay) ➌ No Yes 760-L2BWB-NC 2 Yes No 760-L2BWB-ND (0 0V DC) ➎ 2 () 6 (relay) ➌ Yes Yes 760-L8BWB-EX ➊ 2V DC 8 (2V DC) 4 (relay) ➌ Yes Yes 760-L2DWD Line Power Inputs Outputs Cat. No. PQ 20/240V AC 2 (20/240V AC) 6 (relay) ➌ 760-IA2XOW6I ➏ 2 () ➋ 8 (transistor) ➍ 760-IB2XOB8 ➏ PQ Memory Modules For 2 I/O Pico Controller For 8 I/O Pico Controller 760-MM 760-MM2 Programming Software Configuration software included with processor 760-PICOSOFT Accessories Programming Cable to be used with 760-PICOSOFT configuration software 760-CBL-PM02 Replacement connector for expansion I/O module 760-RPLCONN Programming Cable 760-CBL-PM02 ➊ EX = suitable for use with expansion modules ➋ Current sinking ➌ Isolated ➍ Current sourcing ➎ Two digital inputs maybe used for analog ➏ May be used with either: 760-L8AWA-EX or 760-L8BWB-EX See Publication 760-PP00D-EN-P for complete product information 92 Rockwell Automation