DALI Sequencer. Datasheet. Control Module. DALI-control unit for automatic retrieval of sequences

Transcription

1 DALI Sequencer Datasheet Control Module DALI-control unit for automatic retrieval of sequences Art. Nr (back box) Art.Nr HS (dinrail) DALI Sequencer

2 2 DALI Sequencer Control Device Overview DALI control unit for automatic retrieval of sequences memory for up to 4 sequences types for back box and dinrail mounting din rail type provides 4 switching inputs for mains voltage Sequences (0-3) are started by recalling the corresponding scene or push the corresponding button (dinrail type only) A sequence can combine various command-sequences and scenerecalls One command-sequence can consist of up to 19 DALI-commands the Sequence can be retrieved single or cyclic the DALI Sequencer can be assigned to groups and can react to broadcast commands configuration via DALI-Cockpit software. multimaster capable, several modules can be installed in one DALI circuit the module is supplied by the DALIline Specification, Characteristics type DALI Sequencer article number HS electrical data: supply typ. current consumption DALI via DALI-line control DALI input DALI DALI 4 switching inputs (mains voltage) galvanic isolation - Yes (switching inputs / DALI) Technical data: function ambient temperature 2 ma programmable -10 C to +50 C protection class IP20 connecting wire cross section <1.5 mm 2 <2.5 mm 2 mounting back box dinrail, 1TE dimensions 58mm x 32mm x 15mm 98mm x 18mm x 56mm

3 3 connection plan back box geometry back box connection plan din rail geometry din rail

4 4 typical application: colour changing ambient lighting Installation The sequencer-module is connected directly to the DALI-line. It is supplied by the DALI-line directly and does not need any additional power supply (current consumption typically 2mA).. The connection to the DALI-line is polarity free and protected against overvoltage. The module for back box mounting fits into a standard installation box, the module for dinrail mounting provides 4 switching inputs for mains voltage and a LED, which indicates a running sequence by blinking. Function and Configuration The DALI Sequencer can send DALI commandsequences once or cyclic to the DALI-bus. The sequences can be configured with the DALI Cockpit Software and transferred to the module. The module is able to memorize 4 sequences (sequence 0 -sequence 3), but only one of them can be active at a given moment. To start one of the saved sequences a DALIaddress has to be assigened to the module with the DALI Cockpit Software. Afterwards the sequence can be recalled with GO TO SCENE commands directed to the modules address. Sequence command 0 GOTO SCENE 0 1 GOTO SCENE 1 2 GOTO SCENE 2 3 GOTO SCENE 3 Running sequences will be stopped if either an OFF-command is sent to the modules address or a new sequence is started with the GO TO scene-command. The DALI Sequencer-module can be assigned to groups. Sequences can be stopped with an OFF-command directed to the assigned groups or broadcast. Following commands are OFF-commands: OFF, Direct Arc Power, GOTO SCENE X, RECALL MIN und RECALL MAX. When using the dinrail type the sequences can be started as well by pressing the corresponding input button.

5 5 Sequences The DALI Cockpit supports 2 types of generating sequences. On the one hand predefined macros Dynamic Scenes on the other hand user defined command lists can be used. Predefined Macro Dynamic Scenes When using the Dynamic Scenes -macros the effective range and the order of up to 16 scenes can be defined For each scene recall the fade time and the delay (0 254s) to next scene recall can be configured. User Defined Macros To generate macros, load or safe them as files with the extension *.cot use following menupoint in the DALI-Cockpit Software: DALI-Bus -> DALI-commands-> commands over time. As an example: the scenes 0-3 addressed with A00 and A01 are retrieved with 1min delay each. For example a sequence for automatic color changing could look like as follows 1 : Saved files can be imported on the DALI Sequencer configuration-page: A user defined sequence can include up to 19 DALI-commands. 1 please note that the color values are already saved in the scenes of the RGBW-ballast.

6 6 Additional Information and Equipment DALI-Cockpit free configuration tool from Lunatone for DALI systems DALI-Cockpit.zip Lunatone DALI products Lunatone datasheets and manuals Contact Technical Support: Requests: Disclaimer Subject to change. Information provided without guarantee. The datasheet refers to the current delivery. The compatibility with other devices must be tested in advance to the installation.