Wind Turbine Training System

Transcription

1 Wind Turbine Training System LabVolt Series Datasheet Festo Didactic en 06/2018

2 Table of Contents General Description 2 PLC Compatibility 2 Features & Benefits 2 List of Equipment 2 List of Manuals 3 Table of Contents of the Manual(s) 3 Additional Equipment Required to Perform the Exercises 3 Optional Equipment 3 System 3 Equipment Description 4 Optional Equipment Description 5 General Description The Wind Turbine Training System uses a PLC to monitor the speed and direction of the wind and control the position of the wind turbine nacelle. PLC Compatibility Listed below are the PLC compatibilities with the Wind Turbine Training System, Model PLC Allen-Bradley MicroLogix 1500, Model : Full compatibility, but requires the Analog I/O Expansion Kit, Model PLC Allen-Bradley MicroLogix 1200, Model : Full compatibility, but requires the Analog I/O Expansion Kit, Model PLC Allen-Bradley MicroLogix 1100, Model 3240-A: Full compatibility PLC Siemens ET200S IM151-8, Model 3240-B: Full compatibility, but requires the Analog I/O Expansion Kit, Model 3244-B PLC Siemens ET200S IM151-8 (with Case), Model 3240-C: Full compatibility, but requires the Analog I/O Expansion Kit, Model 3244-C PLC Siemens S7-222, Model : Not recommended PLC Allen-Bradley MicroLogix 1100, Model : Full compatibility Features & Benefits System comprised of a Nacelle Simulator, Model 3297, and a Wind Generator, Model 3213 Small blower for generating air flow Nacelle equipped with dc motor and mechanical clutch Two limit switches with NO and NC contacts Analog position sensor for determining wind direction (0-10 V) Variable-frequency pulse-train signal for measuring wind speed (24 V dc) Requires an external 24 V power supply Accepts two 24 V dc control signals from the PLC for motor operation Includes job sheets List of Equipment 2 Festo Didactic

3 Qty Description Model 1 Wind Generator Nacelle Simulator List of Manuals Manual Description PLC Applications (Job Sheets - Student) PLC Applications (Job Sheets - Instructor) Table of Contents of the Manual(s) PLC Applications (Job Sheets - Student) ( ) 1 Familiarization with the Wind Turbine 2 Wind Tracking 3 Full Nacelle Operation 4 Troubleshooting Additional Equipment Required to Perform the Exercises Qty Description Model 1 Analog I/O Expansion Kit for Training on Wind Turbine PLC Applications, 0.3 day TF Optional Equipment Qty Description Model 1 Push Buttons and Lights Wiring Module Installation and Commissioning of a System IC System PLC Requirements - Inputs 24 V dc V dc / 4-20 ma 1 PLC Requirements - Outputs 24 V dc 2 Intended Location On a table 310 x 870 x 210 mm (12.2 x 34.3 x 8.3 in) TBE 1 Required only for the Programmable Logic Controller, Model Analog I/O Expansion Kits , -A, -B, and -C are available for the Programmable Logic Controller, Models , -A, -B, and -C, respectively. 2 Optional product training. Price provided on demand. For details and options, contact services.didactic@festo.com. 3 Installation and basic commissioning of the equipment in your classroom. Installer fees (flight, accommodation...) must be added to the price. The product (box(es) and/or pallet(s)) must already be in the classroom or extra charges will apply. For details or other options, contact "training.didactic.ca@festo.com". Festo Didactic 3

4 Equipment Description Wind Generator The Wind Generator includes a small blower producing a constant air flow. This sturdy and reliable device is designed to be used with the Wind Turbine Training System, Model Power Requirements Nominal Speed Maximum Air Flow 24 V dc A 2500 r/min 28.3 L/s (60 CFM) 207 x 186 x 230 mm (8.1 x 7.3 x 9.1 in) 3.0 kg (6.6 lb) Nacelle Simulator The Nacelle Simulator replicates the main functionalities of a wind turbine. It is designed to measure the speed and direction of the wind so that a PLC can control the position of the nacelle to optimize its operation. Two limit switches with NO and NC contacts allow monitoring of the of rotations of the nacelle. 4 Festo Didactic

5 Power Requirements Motor Ratings Power Max Speed Analog Wind Direction Output Wind Speed Output Turn Counter Switch Ratings Turn Limit Switch Ratings 24 V dc A 3.04 W 4.2 r/min 0-10 V dc 24 V dc 2 A - 24 V dc 0.1 A - 24 V dc 397 x 235 x 140 mm (15.6 x 9.3 x 5.5 in) 2.9 kg (6.4 lb) Optional Equipment Description Push Buttons and Lights (Optional) The Push Buttons and Lights module features two NO and one NC momentary push buttons, as well as three LED indicator lights. The module can be used to implement a Start/ Pause/Stop station with indicator lights. Contacts (Black Push-Buttons) Type Rating Contacts (Red Push-Button) Type Rating Lights Type Rating Momentary, 2 NO contact sets 3 A - 24 V dc Momentary, 1 NC contact set 3 A - 24 V dc LED (red, amber, green) 0.02 A - 24 V dc 80 x 110 x 150 mm ( 3.1 x 4.3 x 5.9 in) 0.8 kg (1.8 lb) Festo Didactic 5

6 Wiring Module (Optional) The Wiring Module allows easy interfacing between PLCs and PLC applications using 2 mm leads and jacks. The module can also be used to practice wiring skills using the terminal blocks. Number of Jacks 8 Number of Terminal Block Positions 8 76 x 70 x 170 mm (3.0 x 2.8 x 6.7 in) TBE Analog I/O Expansion Kit for (Optional) The Analog I/O Expansion Kit for is an expansion kit for the Programmable Logic Controller, Model , that adds analog inputs and outputs to the PLC. Analog Inputs/Outputs Dimensions (H W D) 2 inputs and 2 outputs; 0-10 V dc / 4-20 ma (12 bits resolution) mm ( in) 0.45 kg (1 lb) 6 Festo Didactic

7 Reflecting the commitment of Festo Didactic to high quality standards in product, design, development, production, installation, and service, our manufacturing and distribution facility has received the ISO 9001 certification. Festo Didactic reserves the right to make product improvements at any time and without notice and is not responsible for typographical errors. Festo Didactic recognizes all product names used herein as trademarks or registered trademarks of their respective holders. Festo Didactic Inc All rights reserved. Festo Didactic SE Rechbergstrasse Denkendorf Germany P. +49(0)711/ F. +49(0)711/ Festo Didactic Inc. 607 Industrial Way West Eatontown, NJ United States P F Festo Didactic Ltée/Ltd 675 rue du Carbone Québec QC G2N 2K7 Canada P F Festo Didactic 7