DIN RAIL TERMINAL BLOCKS

Transcription

1 2

2 Since 1984, Altech Corporation has grown to become a leading supplier of automation and industrial control components. Headquartered in Flemington, NJ, Altech has an experienced staff of engineering, manufacturing and sales personnel to provide the highest quality products with superior service. This is the Altech Commitment! With experienced Product Engineers and Customer Service personnel, Altech provides solutions to your most pressing application challenges. All with one thought in mind - to ensure that we solve your problem the first time! Altech s Commitment Altech s Automation and Control components meet applicable national and international standards, such as UL, NEC, CSA, IEC and VDE. Altech provides these products with superior customer service and delivery through a ISO 9001 Quality Management system, which stresses continuous process improvement. We perform these services with honesty and integrity. All Altech employees are trained in this Quality Management System and are dedicated to achieve these goals. Altech s quality system has been ISO approved since 1999.

3 TABLE OF CONTENTS DIN RAIL TERMINAL BLOCKS Screw Clamp Introduction...4 Selection Guide...5 Feed Through Single Level Multi Connection...9 Double Level Triple Level Ground/ Earth Fuse 5xmm/ 5x25mm Fuse Double Level Fuse Terminal x25.4mm (¼ x 1 ) Fuse...22 Component Carrier...23 Fuse Holder Disconnect & Test Slider Style , 30 Blade Style Lever Style...31 Power Distribution Multi I/O Hybrid Spring/ Screw...35 Distribution / Grounding System...36 Special Application 00V High Voltage...37 Thermocouple...38 Tab Connection...39 Spring Loaded Electronic Components Screw Stud/ Ring Lug Introduction... Selection Guide...51 Ring Lug Barrier Ring Lug Stud Ring Lug Hinge Ring Lug Power High Current Power...60 Stud/ Ring Lug...61 Spring Clamp Introduction...62 Selection Guide...63 CX Series Single Level Feed Through Multi Connection Ground/ Earth Double Level...71 Electronic Component xmm/ 5x25mm Fuse...74 Component Carrier...75 Disconnect...76 Side Entry...77 Pluggable...78 Hybrid Distribution...79 Angular Feed-Through...80 Multi-Connection...81 Multi-Level Ground/ Earth Spring Mini/ Panel Mount Introduction/ Selection Guide...88 Screw Clamp 15mm Mini Rail...89 Panel Mount...90 Spring Clamp 15mm Mini Rail...91 Panel/ DIN Rail Mount...92 Micro Panel Mount...93 High Temperature Ceramic...94 Terminal Strips Eurostrip Style Introduction/ Selection Guide V Flat Base, Feed Through V Standoff Feet, Feed Through Pluggable Middle Barrier, Feed Through Terminal Strips Mounting & Marking DIN Rail Support Brackets/ Mounting Clips...8 End Stops...9 Group Identification Markers...1 Marking Tags/ Warning Labels Plotter & Marking System Ferrules Introduction UL Ferrules Crimping Tools (UL Ferrules) DIN Standard Ferrules Crimping Tools (DIN Ferrules) INDEX TERMS & CONDITIONS Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

4 OVERVIEW SCREW TERMINAL BLOCKS INTRODUCTION SCREW CLAMP CONNECTION TECHNOLOGY Maximum wiring efficiency and reliability Supplied with open clamps ready to accept wires No wire preparation necessary (with/ without ferrule) Vibration resistant/ Gas-tight connection For very larger wire sizes (up to 2 kcmil) Designed for most stringent requirements Simple connection with standard flat head screwdriver E2514 MATERIAL SPECIFICATIONS Housing Screw Current Bar Terminal Clamp INSTALLATION GUIDELINES Current Carrying Metal Corrosion free material Clamp: zinc chromate passivated steel Screw: zinc chromate passivated steel Current Bar: nickel plated copper alloy / tin plated copper Terminal Block Housing Polyamide PA66 Housing Self-extinguishing High mechanical strength Specifications Upper Temperature Limit: 5 C Lower Temperature Limit: - C Flammability UL94: V2/ V0 Volume Resistivity: 12 Ω cm Surface Resistivity: Ω 1 2 Secure Connection 3 1 Insert Wire into open clamp 2 Tighten screw to specified torque 3 Remove Screwdriver, screw terminal is closed with locking feature for a reliable/ safe connection SCREW CLAMP ACCESSORIES AND FEATURES Internal Jumper Separator Plate Isolated Internal Jumper Shorting Screw Current Bar Shorting Sleeve End Plate Isolation Partition DIN Rail External Jumper End Stop Marking Tags 4 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

5 SELECTION GUIDE OVERVIEW SCREW TERMINAL BLOCKS Feed Through Up to 240A Multi-Connection Terminals Double Level Terminal Triple Level Terminals Ground Blocks Wide range of accessories All standard colors Feed Through page 6-8 Multi-Connection page 9 Double Level page -12 Triple Level page Ground / Earth page Fuse 1/4" x 1" Fuse 5xmm/ 5x25mm Fuse Double level versions Component Carrier for flexible requirements x38, CC, J-Type Fuse Holder 5xmm / 5x25mm CF4U / CF4SP page Double Lever DDFL4U page -21 1/4 x1 CAFL4U page 22 Component Carrier CCC4U page 23 Fuse Holder page Disconnect & Test Slider Style Blade/ Knife Style Lever Style and matching Feed Through terminals Slider Style CDS6U page Blade Style CKT4U page 28 Blade Style CKT4SP page 29 Slider Style CDTTU page 30 Lever Style CSDL4U page 31 Power Distribution Various I/O configurations Up to 1A Compact Hybrid Distribution Block CDB Series page CMDB Series page 34 Hybrid CXDB Series page 35 Distribution/Grounding page 36 Special Application Spring Loaded Terminals for high vibration applications 00V High Voltage Terminals Thermocouple Terminals Tab Connection Terminals Electronic Components Terminals 00V High Voltage CHV Series page 37 Thermocouple CTT2.5U Series page 38 Tab Connection CTC Series page 39 Spring Loaded USC Series page Electronic Components page Internal Jumpers (Uninsulated, Insulated) Endplates Partition/ Separator Plates Protective Covers End Stops Jumpers page 48 Endplates, Separators, End Stops, Covers, etc. page 49 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

6 FEED-THROUGH SCREW TERMINAL BLOCKS HIGHLIGHTS CTS2.5U-N SINGLE LEVEL TERMINAL BLOCKS CTS4U-N CTS6U FEATURES Altech CTS Series of Universal Screw Terminal Blocks featuring global standards Universal mounting foot for easy snap onto common DIN rail profiles Screw-type jumper system Current Ratings up to 240A APPLICATIONS Ex & IECEx approvals for use in potentially explosive areas Control, Automation applications Power Distribution Mounting Handle Mounting handle is used for mounting terminal blocks on a DIN rail, thus saving considerable time. Specially designed pins in the mounting handle grip the terminal blocks when pressed against entry. Terminal Block MH2.5 MH4 CTS2.5U-N CTS4U-N 1 1 Dimensions & Weight Height w DIN Rail 35 x 7.5 mm 5 mm Length 43 mm 43 mm 43 mm 46.2 mm 53.7 mm Wire Stripping Length 8 mm 8 mm 9 mm Screwdriver Flat Head 0.5 x 3.0 mm Flat Head 0.6 x 3.5 mm Flat Head 0.8 x 4.0 mm Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W CTS2.5U-N 0 CTS2.5U-N/R 0 CTS2.5U-N/BU 0 CTS2.5U-N/BL 0 CTS2.5U-N/O 0 CTS2.5U-N/G 0 CTS2.5U-N/Y 0 CTS2.5U-N/W mm 53.7 mm CTS4U-N 0 CTS4U-N/R 0 CTS4U-N/BU 0 CTS4U-N/BL 0 CTS4U-N/O 0 CTS4U-N/G 0 CTS4U-N/Y 0 CTS4U-N/W 0 8 mm 47.8 mm 55.5 mm Weight per piece 6.2 g 7.6 g 13.5 g E2514 E2514 E2514 Wire Size (solid / stranded) AWG mm AWG mm AWG Voltage Rating 600 V 00V AC/DC 600 V 00V AC/DC 600 V 00V AC/DC Current Rating 25 A 24 A 35 A 32 A A 41 A Torque 7 lb-in 0.4 Nm 7 lb-in 0.5 Nm 14 lb-in 0.8 Nm Insulation Material End Plate Partition Plate DIN Rail End Stop Internal Jumper pole 0 pole EP2.5/4UN PP2.5/4UN CA702 CA802 CA2 25 CA721/2 0 CA721/3 0 CA721/4 0 CA721/ CA721/0 External Jumper CA717/2 0 CA717/3 0 CA717/4 0 pole CA717/ Test Socket CA707/TS/01 0 EP2.5/4UN PP2.5/4UN CA702 CA802 CA2 25 CA722/2 0 CA722/3 0 CA722/4 CA722/ CA722/0 CA714/2 0 CA714/3 0 CA714/4 0 CA714/ CA707/TS/01 0 CTS6U 0 CTS6U/R 0 CTS6U/BU 0 CTS6U/BL 0 CTS6U/O 0 CTS6U/G 0 CTS6U/Y 0 CTS6U/W 0 EP6/U PP6/U Separator Plate SP2.5/4UN 0 SP2.5/4UN 0 SP6/U 0 Insulated Internal Jumper AEx ell Ex ell U pole 0 pole CA741/2 0 CA741/3 0 CA741/4 0 CA741/ CA741/0 CA742/2 0 CA742/3 0 CA742/4 0 CA742/ CA742/ CA702 CA802 CA2 25 CA723/2 0 CA723/3 CA723/4 CA723/ CA743/2 0 CA743/3 CA743/4 CA743/ CA7/2 0 CA7/3 CA7/4 CA7/ CA707/TS/05 0 Marking Tag MT5 1 Pk. (0 tags) MT6 1 Pk. (0 tags) MT8 1 Pk. (0 tags) 6 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

7 SINGLE LEVEL TERMINAL BLOCKS CTSU CTS16U FEED-THROUGH SCREW TERMINAL BLOCKS CTS25UN CTS35UN Dimensions & Weight mm Length 43 mm 43 mm 49 mm.5 mm Height w DIN Rail 35 x 7.5 mm 47.8 mm 55.5 mm CTSU 0 CTSU/R 0 CTSU/BU 0 CTSU/BL 0 CTSU/O 0 CTSU/G 0 CTSU/Y 0 CTSU/W mm 55.5 mm Weight per piece 16.5 g 25.5 g 35.5 g.5 g AEx ell Ex ell U Insulation Material Wire Stripping Length 11 mm 12 mm 14 mm 15 mm Screwdriver Flat Head 0.8 x 4.0 mm Flat Head 1.0 x 5.5 mm Flat Head 1.0 x 5.5 mm Flat Head 1.0 x 5.5 mm Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W 12 mm CTS16U CTS16U/R CTS16U/BU CTS16U/BL CTS16U/O CTS16U/G CTS16U/Y CTS16U/W 12 mm 57.2 mm 64.7 mm CTS25UN CTS25UN/R CTS25UN/BU CTS25UN/BL CTS25UN/O CTS25UN/G CTS25UN/Y CTS25UN/W mm 66.7 mm E2514 E2514 E2514 E2514 Wire Size (solid / stranded) 16-6 AWG 22-6 AWG 0.5- mm 2-4 AWG 22-6 AWG AWG 4-25 mm /0 AWG 4-35 mm 2 Voltage Rating 600 V 600 V 00V AC/DC 600 V 600 V 00V AC/DC 600 V 00V AC/DC 600 V 00V AC/DC Current Rating 65 A 65 A 57 A 85 A 70 A 76 A 5 A 1 A 1 A 125 A Torque 14 lb-in 14 lb-in 1.2 Nm 14 lb-in 14 lb-in 1.2 Nm 30 lb-in 2.0 Nm lb-in 2.5 Nm CTS35UN CTS35UN/R CTS35UN/BU CTS35UN/BL CTS35UN/O CTS35UN/G CTS35UN/Y CTS35UN/W End Plate EP6/U Partition Plate PP6/U PP25UN PP35UN Separator Plate SP6/U 0 SP6/U 0 DIN Rail End Stop Internal Jumper Insulated Internal Jumper pole 0 pole pole 0 pole CA702 CA802 CA2 25 CA724/2 0 CA724/3 CA724/4 CA724/ CA744/2 0 CA744/3 CA744/4 CA744/ CA702 CA802 CA2 25 CA751/2 CA751/3 CA751/4 CA751/ CA751/0 CA761/2 0 CA761/3 CA761/4 CA761/ CA761/0 External Jumper CA718/2 0 CA718/3 CA718/4 pole CA718/ Test Socket CA707/TS/05 0 CA707/TS/ CA702 CA802 CA2 25 CA725/2 CA725/3 CA725/4 CA725/ CA725/0 CA745/2 CA745/3 CA745/4 CA745/ CA745/0 CA707/TS/ CA702 CA802 CA2 25 CA771/2 CA771/3 CA771/4 CA771/ CA781/2 CA781/3 CA781/4 CA781/ CA707/TS/06 0 Marking Tag MT 1 Pk. (0 tags) MT12 1 Pk. (0 tags) MT12 1 Pk. (0 tags) MT16 1 Pk. (0 tags) Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

8 FEED-THROUGH SCREW TERMINAL BLOCKS SINGLE LEVEL POWER TERMINAL BLOCKS CTS/70N CTS/70NA CTS95/1N HIGHLIGHTS FEATURES DIN Rail and Panel mountable Voltage Rating 00V Current Rating up to 240A Hex Screw version for easier tightening (NA) Auxiliary block for easy plug in APPLICATIONS Power Distribution Solar Applications AUX6 auxiliary for indicator light or contactor Dimensions & Weight Height w DIN Rail 35 x 7.5 mm.5 mm 71.1 mm 78.1 mm Wire Stripping Length 22 mm 22 mm 24 mm Screwdriver Flat Head 1.0x7.5 mm Allen Wrench 5 mm Allen Wrench Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W CTS/70N CTS/70N/R CTS/70N/BU CTS/70N/BL CTS/70N/O CTS/70N/G CTS/70N/Y CTS/70N/W.5 mm 71.1 mm 78.1 mm CTS/70NA CTS/70NA/R CTS/70NA/BU CTS/70NA/BL CTS/70NA/O CTS/70NA/G CTS/70NA/Y CTS/70NA/W 27.0 mm Length 77.3 mm 77.3 mm 84.5 mm 83.0 mm 90.5 mm Weight per piece 93.8 g 95.0 g g CB SCHEME with Allen Screw E2514 E2514 E2514 Wire Size (solid / stranded) 8-2/0 AWG -70 mm 2 8-2/0 AWG -70 mm KCMIL 25-1 mm 2 Voltage Rating 00 V 00 V AC/DC 00 V 00 V AC/DC 00 V 00 V AC/DC Current Rating 175 A 192 A 175 A 192 A 240 A 269 A Torque 38 lb-in 3.0 Nm 38 lb-in 3.0 Nm 90 lb-in 6.0 Nm Insulation Material CTS95/1N CTS95/1N/R CTS95/1N/BU CTS95/1N/BL CTS95/1N/O CTS95/1N/G CTS95/1N/Y CTS95/1N/W with Allen Screw DIN Rail End Stop Marking Tag CA702 CA802 CA2 25 Shorting Link System CA628/2 CA628/3 MT16 1 Pk. (0 tags) CA702 CA802 CA2 25 CA628/2 CA628/3 MT16 1 Pk. (0 tags) CA702 CA802 CA2 25 CA629/2 CA629/3 MT16 1 Pk. (0 tags) Cat. No AUX6 Auxiliary Terminal Block Used for: CTS/70N CTS/70NA CTS95/1N In certain power circuits, there is a need to take an extra connection for an Auxiliary circuit like an indicating light or contactor. The AUX6 terminal easily plugs into the terminal and provides this extra connection point. Ratings IEC Voltage/Current: 00 V / 41 A Torque: 0.8 Nm IEC Voltage/Current: 630 V / 36 A Torque: 0.8 Nm UL-59 Voltage/Current: 600 V / A Torque: 14 lb-in CSA Voltage/Current: 600 V / A Torque: 14 lb-in Wire Range: 22-8 AWG x Length x Height: 8 x 53.6 x 29.4 mm : Marking Tag: MT8 8 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

9 FEED THROUGH MULTI-CONNECTION CMC1-2 CMC2-2 FEED-THROUGH SCREW TERMINAL BLOCKS CMCG4 HIGHLIGHTS Dimensions & Weight Height w DIN Rail 35 x 7.5 mm Length 46.5 mm 65.0 mm 65.0 mm 49.5 mm 56.5 mm Wire Stripping Length 9 mm 9 mm 9 mm Screwdriver Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W CMC1-2 0 CMC1-2/R 0 CMC1-2/BU 0 CMC1-2/BL 0 CMC1-2/O 0 CMC1-2/G 0 CMC1-2/Y 0 CMC1-2/W mm 60.5 mm CMC2-2 CMC2-2/R CMC2-2/BU CMC2-2/BL CMC2-2/O CMC2-2/G CMC2-2/Y CMC2-2/W 53.7 mm 60.9 mm Weight per piece 11.0 g 16.0 g 21.6 g E2514 E2514 E2514 Wire Size (solid / stranded) 22- AWG mm AWG mm AWG mm 2 Voltage Rating 600 V 630 V AC/DC 600 V 630 V AC/DC 600 V 00 V AC/DC Current Rating 35 A 32 A 35 A 32 A - - Torque 7 lb-in 0.5 Nm 7 lb-in 0.5 Nm 4.5 lb-in 0.5 Nm Insulation Material CMCG4 Yellow/Green FEATURES 3 to 4 connections Up to 2 connection points on each side 2 jumper channels on CMC2-2 for individual potential distribution CMCG4 same profile as regular feed-through version APPLICATIONS Connecting different type of wires with different wire sizes into a single terminal block Simple distribution applications End Plate EPCMC1-2 EPCMC2-2 EPCMC2-2 DIN Rail End Stop Internal Jumper Insulated Internal Jumper pole 0 pole pole 0 pole CA702 CA802 CA2 25 CA722/2 0 CA722/3 0 CA722/4 CA722/ CA722/0 CA742/2 0 CA742/3 0 CA742/4 0 CA742/ CA742/0 External Jumper CA713/2 0 CA713/3 0 CA713/4 0 pole CA713/ Test Socket CA707/TS/ CA702 CA802 CA2 25 CA722/2 0 CA722/3 0 CA722/4 CA722/ CA722/0 CA742/2 0 CA742/3 0 CA742/4 0 CA742/ CA742/0 CA713/2 0 CA713/3 0 CA713/4 0 CA713/ CA707/TS/ CA702 CA802 CA2 25 Marking Tag MT6 1 Pk. (0 tags) MT6 1 Pk. (0 tags) MT6 1 Pk. (0 tags) Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

10 DOUBLE LEVEL SCREW TERMINAL BLOCKS HIGHLIGHTS CDL4UN FEED THROUGH DOUBLE LEVEL CDL4UN(I.S) FEATURES Accommodates larger MT6 marking tags on both levels Independent and internally shorted version CDL4UN offers jumper channel on both levels Same profile Ground versions Grounding Level on CDLG4 is identified by green/yellow imprint APPLICATIONS High density writing applications Dimensions & Weight Length Height w DIN Rail 35 x 7.5 mm Weight per piece 57.0 mm 59.5 mm 67.2 mm 13.8 g E2514 E2514 Wire Size (solid / stranded) 22- AWG mm AWG mm 2 Voltage Rating 600 V 800 V AC/DC 600 V 800 V AC/DC Current Rating 35 A 32 A 35 A 32 A Torque 7 lb-in 0.5 Nm 7 lb-in 0.5 Nm Insulation Material Wire Stripping Length Screwdriver Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W End Plate 9 mm Flat Head 0.6 x 3.5 mm CDL4UN 0 CDL4UN/R 0 CDL4UN/BU 0 CDL4UN/BL 0 CDL4UN/O 0 CDL4UN/G 0 CDL4UN/Y 0 CDL4UN/W 0 EPCDL4UN 57.0 mm 59.5 mm 67.2 mm 15.6 g 9 mm Flat Head 0.6 x 3.5 mm CDL4UN(I.S) 0 CDL4UN(I.S)/R 0 CDL4UN(I.S)/BU 0 CDL4UN(I.S)/BL 0 CDL4UN(I.S)/O 0 CDL4UN(I.S)/G 0 CDL4UN(I.S)/Y 0 CDL4UN(I.S)/W 0 EPCDL4UN Separator Plate SPCDL4U 0 SPCDL4U 0 DIN Rail End Stop Internal Jumper pole 0 pole CA702 CA802 CA2 25 CA722/2 0 CA722/3 0 CA722/4 0 CA722/ CA722/ CA702 CA802 CA2 25 CA722/2 0 CA722/3 0 CA722/4 0 CA722/ CA722/0 Insulated Internal Jumper pole 0 pole CA742/2 0 CA742/3 0 CA742/4 0 CA742/ CA742/0 CA742/2 0 CA742/3 0 CA742/4 0 CA742/ CA742/0 External Jumper Test Socket pole CA714/2 0 CA714/3 CA714/4 CA714/ CA707/TS/01 0 CA714/2 0 CA714/3 CA714/4 CA714/ CA707/TS/01 0 Marking Tag MT6 1 Pk. (0 tags) MT6 1 Pk. (0 tags) Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

11 FEED THROUGH DOUBLE LEVEL DOUBLE LEVEL SCREW TERMINAL BLOCKS CDLG4(I.S) CDLG4 CDLG2.5 Dimensions & Weight Length Height w DIN Rail 35 x 7.5 mm Weight per piece 59.5 mm 67.2 mm 57.0 mm 57.0 mm 59.5 mm 67.2 mm 22.2 g.6 g 71.0 mm 53.0 mm 61.0 mm.2 g Wire Size (solid / stranded) Voltage Rating Current Rating Torque CB SCHEME E2514 E2514 E AWG mm AWG mm AWG mm 2 1 V 0 V AC/DC 1 V 0 V AC/DC 300 V 0 V A (upper level) 32 A 24 A 24 A 4.5 lb-in 0.5 Nm 4.5 lb-in 0.5 Nm 4.5 lb-in 0.4 Nm Insulation Material Wire Stripping Length Screwdriver Yellow/Green 8 mm 8 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm CDLG4(I.S) 0 CDLG4 0 9 mm Flat Head 0.5 x 3.0 mm CDLG2.5 0 End Plate EPCDL4UN EPCDL4UN EPCDLG2.5 Separator Plate SPCDL4U 0 SPCDL4U 0 SPCDLG2.5 0 DIN Rail End Stop Internal Jumper pole 0 pole CA702 CA802 CA2 25 CA722/2 0 CA722/3 0 CA722/4 CA722/ CA722/ CA702 CA802 CA2 25 CA722/2 0 CA722/3 0 CA722/4 CA722/ CA722/ CA702 CA802 CA2 25 CA627/2 0 CA627/3 0 CA627/4 0 CA627/ Insulated Internal Jumper pole 0 pole CA742/2 0 CA742/3 0 CA742/4 0 CA742/ CA742/0 CA742/2 0 CA742/3 0 CA742/4 0 CA742/ CA742/0 External Jumper pole CA714/2 0 CA714/3 CA714/4 CA714/ CA714/2 0 CA714/3 CA714/4 CA714/ CA715/2 0 CA715/3 0 CA715/4 0 CA715/ Test Socket CA707/TS/01 0 CA707/TS/01 0 CA707/TS/01 0 Marking Tag MT6 1 Pk. (0 tags) MT6 1 Pk. (0 tags) MT2G 1 Pk. (0 tags) Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

12 DOUBLE LEVEL SCREW TERMINAL BLOCKS FEED THROUGH OFFSET DOUBLE LEVEL ODL4U HIGHLIGHTS FEATURES Top Level is offset by half terminal width from lower level Offset allows better access to both levels even when fully wired Different Endplates for front and back side guarantee flush mounting to neighboring terminal blocks or end stops (EPODL4U and EP1ODL4U) Dimensions & Weight Length Height w DIN Rail 35 x 7.5 mm Weight per piece Wire Size (solid / stranded) 68 mm 65.0 mm 71.1 mm 14.5 g E AWG mm 2 ODL4U (without End Plates) Voltage Rating 600 V 800 VAC/DC APPLICATIONS High density writing applications Current Rating Torque Insulation Material Wire Stripping Length 35 A 32 A 7 lb-in 0.5 Nm 9 mm Screwdriver Flat Head 0.6 x 3.5 mm Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W End Plate ODL4U 0 ODL4U/R 0 ODL4U/BU 0 ODL4U/BL 0 ODL4U/O 0 ODL4U/G 0 ODL4U/Y 0 ODL4U/W 0 EPODL4U (Front) EP1ODL4U (Back) End Plate (Front) EPODL4U ODL4U (with End Plates) End Plate (Back) EP1ODL4U Separator Plate SPCDL4U 0 DIN Rail End Stop Internal Jumper Insulated Internal Jumper External Jumper Test Socket pole 0 pole pole 0 pole pole CA702 CA802 CA2 25 CA727/2 0 CA727/3 0 CA727/4 0 CA727/ CA727/0 CA747/2 0 CA747/3 0 CA747/4 0 CA747/ CA747/0 CA714/2 0 CA714/3 0 CA714/4 0 CA714/ CA707/TS/01 Marking Tag MT6 1 Pk. (0 tags) 12 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

13 FEED THROUGH DOUBLE LEVEL ODL2.5 ODL2.5(I.S) ODLG2.5 DOUBLE LEVEL SCREW TERMINAL BLOCKS ODLG2.5(I.S) Dimensions & Weight Length Height w DIN Rail 35 x 7.5 mm Weight per piece Wire Size (solid / stranded) Voltage Rating Current Rating Torque Insulation Material Wire Stripping Length Screwdriver Grey Stackable Clip-on Double Level with Offset 5 mm 63.0 mm 70.5 mm ODL2.5 ODL2.5A Double Level with Offset Internally Shorted Upper / Lower Level 5 mm 62.0 mm 62.0 mm 63.0 mm 70.5 mm 13.0 g 14.2 g AWG mm AWG mm V 800 V AC/DC 300 V 800 V AC/DC 25 A 24 A 25 A 24 A 4.5 lb-in 0.4 Nm 4.5 lb-in 0.4 Nm 8 mm 8 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm ODL2.5(I.S) ODL2.5A(I.S) Double Level with Offset Ground Connection 5 mm 62.0 mm 63.0 mm 70.5 mm 15.3 g UL UL UL UL AWG mm V 800 V AC/DC 25 A 24 A 4.5 lb-in 0.4 Nm 8 mm Flat Head 0.6 x 3.5 mm ODLG2.5 ODLG2.5A Double Level with Offset Internally Shorted / Ground Connection 5 mm 62.0 mm 63.0 mm 70.5 mm 17.0 g AWG mm V 800 V AC/DC 24 A 24 A 4.5 lb-in 0.4 Nm 8 mm Flat Head 0.6 x 3.5 mm ODLG2.5(I.S) ODLG2.5A(I.S) End Plate Front Side Back Side EPODL2.5 EP1ODL2.5 EPODL2.5 EP1ODL2.5 EPODL2.5 EP1ODL2.5 EPODL2.5 EP1ODL2.5 DIN Rail End Stop Shorting Link/ Jumpers Marking Tag 5 pole 6 pole 7 pole 8 pole pole CA702 CA802 CA2 25 JX2.5/2 0 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/ MT5 1 Pk. (0 tags) CA702 CA802 CA2 25 JX2.5/2 0 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/ MT5 1 Pk. (0 tags) CA702 CA802 CA2 25 JX2.5/2 0 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/ MT5 1 Pk. (0 tags) CA702 CA802 CA2 25 JX2.5/2 0 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/ MT5 1 Pk. (0 tags) Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

14 TRIPLE LEVEL SCREW TERMINAL BLOCKS HIGHLIGHTS CTL2.5U FEED THROUGH TRIPLE LEVEL CTL2.5U-H CTL2.5U(I.S) FEATURES 3 Feed through levels Marking Tag space on all 3 levels Independent Levels and internally shorted version CTL2.5U(I.S) LED versions to show switching indication in various voltages - CTL2.5U(L)/XX 3 Level terminal with additional grounding level CTLG2.5 APPLICATIONS Control Systems with sensor applications Actuator applications Motor applications Applications with high wire density Dimensions & Weight Length Height w DIN Rail 35 x 7.5 mm Weight per piece 84.0 mm 68.0 mm g E2514 E2514 E2514 Wire Size (solid / stranded) AWG mm AWG mm AWG mm 2 Voltage Rating 300 V 0 V AC/DC 300 V 0 V AC/DC 1 V 0 V AC/DC Current Rating 25 A 24 A 25 A 24 A 25 A 24 A Torque 4.5 lb-in 0.4 Nm 4.5 lb-in 0.4 Nm 4.5 lb-in 0.4 Nm Insulation Material Wire Stripping Length Screwdriver Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W 9 mm Flat Head 0.5 x 3.0 mm CTL2.5U CTL2.5U/R CTL2.5U/BU CTL2.5U/BL CTL2.5U/O CTL2.5U/G CTL2.5U/Y CTL2.5U/W 61.0 mm 68.0 mm g 9 mm Flat Head 0.5 x 3.0 mm CTL2.5U-H CTL2.5U-H/R CTL2.5U-H/BU CTL2.5U-H/BL CTL2.5U-H/O CTL2.5U-H/G CTL2.5U-H/Y CTL2.5U-H/W 84.0 mm 68.0 mm g 9 mm Flat Head 0.5 x 3.0 mm CTL2.5U(I.S) CTL2.5U(I.S)/R CTL2.5U(I.S)/BU CTL2.5U(I.S)/BL CTL2.5U(I.S)/O CTL2.5U(I.S)/G CTL2.5U(I.S)/Y CTL2.5U(I.S)/W End Plate EPCTL2.5U EPCTL2.5U-H EPCTL2.5U DIN Rail End Stop Internal Jumper pole 0 pole CA702 CA802 CA2 25 CA722/2 0 CA722/3 0 CA722/4 0 CA722/ CA722/ CA702 CA802 CA2 25 CA722/2 0 CA722/3 0 CA722/4 0 CA722/ CA722/0 External Jumper CA715/2 0 CA715/2 0 CA715/3 0 CA715/3 0 CA715/4 0 CA715/4 0 pole CA715/ CA715/ Test Socket CA707/TS/01 0 CA707/TS/ CA702 CA802 CA2 25 CA722/2 0 CA722/3 0 CA722/4 0 CA722/ CA722/0 CA715/2 0 CA715/3 0 CA715/4 0 CA715/ CA707/TS/01 0 Marking Tag MT2 1 Pk. (0 tags) MT2 1 Pk. (0 tags) MT2 1 Pk. (0 tags) 14 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

15 FEED THROUGH TRIPLE LEVEL TRIPLE LEVEL SCREW TERMINAL BLOCKS CTL2.5U-H(L)/XX CTL2.5U(L)/XX CTL2.5UH(I.S)D2 CTLG2.5 Dimensions & Weight Length 61.0 mm 84.0 mm 61.0 mm 87.5 mm Height w DIN Rail 35 x 7.5 mm 68.0 mm mm mm mm 74.0 mm Weight per piece 21.0 g 21.0 g 15.1 g 27.4 g Wire Size (solid / stranded) Voltage Rating Current Rating Torque Insulation Material Wire Stripping Length Screwdriver Grey LED Voltage 12 V LED Voltage 24 V LED Voltage 48 V LED Voltage 1 V LED Voltage 2 V E2514 E2514 E2514 E AWG mm AWG mm AWG mm AWG mm V 0 V AC/DC 300 V 0 V AC/DC 1 V 0 V AC/DC 300 V 440 V 25 A 24 A 25 A 24 A 25 A 24 A 24 A 24 A 4.5 lb-in 0.4 Nm 4.5 lb-in 0.4 Nm 4.5 lb-in 0.4 Nm 4.5 lb-in 0.4 Nm 9 mm 9 mm Flat Head 0.5 x 3.0 mm Flat Head 0.5 x 3.0 mm CTL2.5U-H(L)/12 CTL2.5U-H(L)/24 CTL2.5U-H(L)/48 CTL2.5U-H(L)/1 CTL2.5U-H(L)/2 CTL2.5U(L)/12 CTL2.5U(L)/24 CTL2.5U(L)/48 CTL2.5U(L)/1 CTL2.5U(L)/2 9 mm Flat Head 0.5 x 3.0 mm CTL2.5UH(I.S)D2 9 mm Flat Head 0.6 x 3.5 mm CTLG2.5 0 Yellow/Green End Plate EPCTL2.5U-H EPCTL2.5U EPCTL2.5U-H EPCTLG2.5 DIN Rail End Stop Internal Jumper pole 0 pole CA702 CA802 CA2 25 CA722/2 0 CA722/3 0 CA722/4 0 CA722/ CA722/ CA702 CA802 CA2 25 CA722/2 0 CA722/3 0 CA722/4 0 CA722/ CA722/ CA702 CA802 CA2 25 CA722/2 0 CA722/3 0 CA722/4 0 CA722/ CA722/ CA702 CA802 CA2 25 CA627/2 0 CA627/3 0 CA627/4 0 CA627/ External Jumper Test Socket pole CA715/2 0 CA715/3 0 CA715/4 0 CA715/ CA707/TS/01 0 CA715/2 0 CA715/3 0 CA715/4 0 CA715/ CA707/TS/01 0 CA715/2 0 CA715/3 0 CA715/4 0 CA715/ CA707/TS/01 0 CA715/2 0 CA715/3 0 CA715/4 0 CA715/ CA707/TS/01 0 Marking Tag MT2 1 Pk. (0 tags) MT2 1 Pk. (0 tags) MT2 1 Pk. (0 tags) MT2G 1 Pk. (0 tags) Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

16 GROUND SCREW TERMINAL BLOCKS GROUND/EARTH TERMINAL BLOCKS CGT4U CGT4N CGT6N HIGHLIGHTS FEATURES Yellow/Green color code as per industry standard Clamp mechanically on Rail by tightening middle screw Rail serves as grounding busbar to feed ground potential to all other grounding terminals CGT4N, CGT6N, CGTN and CGT16N have same profile as respective feed through blocks CGT4U, CGTU, and CGT35U mount on both 35mm and 32mm DIN-Rail APPLICATIONS Grounding Applications Dimensions & Weight Height w DIN Rail 35 x 7.5 mm Length 43 mm 54.2 mm 54.5 mm 49.5 mm 56.7 mm Wire Stripping Length 8 mm 8 mm 9 mm Screwdriver Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.8 x 4.0 mm 47.0 mm 54.4 mm 8 mm 48.2 mm 55.8 mm Weight per piece 21.5 g 22.0 g 27.0 g AEx ell Ex ell U E2514 E2514 E2514 Wire Size (solid / stranded) 22- AWG mm AWG mm AWG Voltage Rating 600 V 800 V AC/DC 600 V 00 V AC/DC 600 V 00 V AC/DC Current Rating Torque 7.0 lb-in 0.5 Nm 7 lb-in 0.5 Nm 14 lb-in 1.6 Nm Insulation Material Yellow/Green CGT4U CGT4N CGT6N End Plate EPCGT4U/Y DIN Rail Marking Tag MT6 1 Pk. (0 tags) MT6 1 Pk. (0 tags) MT8 1 Pk. (0 tags) Assembly example for single phase 3 wire circuits. 16 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

17 GROUND/EARTH TERMINAL BLOCKS GROUND SCREW TERMINAL BLOCKS CGTU CGTN CGT16N CGT35U Dimensions & Weight mm Length 45.0 mm 55.0 mm 55.0 mm 58.0 mm Height w DIN Rail 35 x 7.5 mm 51.0 mm 58.2 mm Weight per piece 30.5 g 35.2 g 39.6 g 2.0 g AEx ell Ex ell U E2514 E2514 E2514 E2514 IEC Wire Size (solid / stranded) 16-8 AWG 22-6 AWG 0.2- mm AWG 0.2- mm 2-4 AWG AWG mm 2 Voltage Rating 600 V 600 V 00 V AC/DC 600 V 00 V AC/DC 600 V 00 V AC/DC 600 V 00 V AC/DC Current Rating Torque 14 lb-in 14 lb-in 1.6 Nm 14 lb-in 1.6 Nm 14 lb-in 1.6 Nm 25 lb-in 2.8 Nm Insulation Material mm 48.5 mm 56.0 mm Wire Stripping Length 11 mm 11 mm 12 mm 15 mm Screwdriver Flat Head 0.8 x 4.0 mm Flat Head 0.8 x 4.0 mm Flat Head 1.0 x 5.5 mm Flat Head 1.0 x 5.5 mm Yellow/Green CGTU CGTN CGT16N CGT35U 12 mm 48.5 mm 56.0 mm mm 70.5 mm End Plate DIN Rail Marking Tag MT 1 Pk. (0 tags) MT 1 Pk. (0 tags) MT12 1 Pk. (0 tags) MT16 1 Pk. (0 tags) Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

18 FUSE BLOCKS SCREW TERMINAL BLOCKS FUSE BLOCKS, 5 x and 5 x 25 mm CF4U CF4U(L)/6-60V CF4U(L)/1-240V HIGHLIGHTS FEATURES CF4U Series accepts 5xmm/ 5x25mm fuse types Completely enclosed, no endplates CF4U(L) version with LED for blown fuse indication Large marking area No polarity required Blocks can be used for AC & DC Voltages APPLICATIONS Control systems with fuse protection Dimensions & Weight Height w DIN Rail 35 x 7.5 mm 8 mm.3 mm mm Length 57.0 mm 57.0 mm.3 mm 57. Weight per piece 14.8 g 15.4 g E E E Wire Size (solid / stranded) 22- AWG mm AWG mm AWG mm 2 Voltage Rating 600 V 800 V AC/DC 600 V 800 V AC/DC Current Rating A 6.3 A A 6.3 A Torque 7 lb-in 0.5 Nm 7 lb-in 0.5 Nm Insulation Material Fuse Specifications Fuse Type 5x mm / 5 x 25 mm 5x mm / 5 x 25 mm LED Indicator Voltage V AC/DC 27KΩ 2KΩ 8 mm 57.0 mm.3 mm g 600 V 800 V AC/DC A 6.3 A 7 lb-in 0.5 Nm 5x mm / 5 x 25 mm 1-240V AC/DC Wire Stripping Length 9.5 mm 9.5 mm Screwdriver Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Grey (standard) Blue BU Black BL CF4U CF4U/BU CF4U/BL DIN Rail External Jumper CA711/2 0 CA711/3 CA711/4 pole CA711/ CF4U(L)/6-60V CF4U(L)/6-60V/BU CF4U(L)/6-60V/BL CA711/2 0 CA711/3 CA711/4 CA711/ Marking Tag On Terminal MT8 1 Pk. (0 tags) MT8 1 Pk. (0 tags) On Fuse Carrier MT6 1 Pk. (0 tags) MT6 1 Pk. (0 tags) 9.5 mm Flat Head 0.6 x 3.5 mm CF4U(L)/1-240V CF4U(L)/1-240V/BU CF4U(L)/1-240V/BL CA711/2 0 CA711/3 CA711/4 CA711/ MT8 MT6 1 Pk. (0 tags) 1 Pk. (0 tags) Fuses 5 x mm Current Slow Blow Fast Blow Rating Cat. No Cat. No 0.1A 0.1M5xT 0.1M5xF 0.2A 0.2M5xT 0.2M5xF 0.5A 0.5M5xT 0.5M5xF 1.0A 1.0M5xT 1.0M5xF 2.0A 2.0M5xT 2.0M5xF 4.0A 4.0M5xT 4.0M5xF 5.0A 5.0M5xT 5.0M5xF 6.3A 6.3M5xT 6.3M5xF 8.0A 8.0M5xT 8.0M5xF.0A.0M5xT.0M5xF 18 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

19 FUSE BLOCKS, 5 x and 5 x 25 mm CF4SP CF4SP(L)/6-60V FUSE BLOCKS SCREW TERMINAL BLOCKS CF4SP(L)/1-240V HIGHLIGHTS Dimensions & Weight Height w DIN Rail 35 x 7.5 mm 70.0 mm 77.5 mm Length 58.5 mm 58.5 mm 70.0 mm 77.5 mm Weight per piece 16.9 g 17.4 g E E E Wire Size (solid / stranded) 24- AWG mm AWG mm AWG mm 2 Voltage Rating 600 V 00 V AC/DC 600 V 00 V AC/DC Current Rating A A A A Torque 4.5 lb-in 0.5 Nm 4.5 lb-in 0.5 Nm Insulation Material Fuse Specifications Fuse Type 5x mm / 5 x 25 mm 5x mm / 5 x 25 mm LED Indicator Voltage V AC/DC 27KΩ 2KΩ 58.5 mm 70.0 mm 77.5 mm 17.4 g 600 V 00 V AC/DC A A 4.5 lb-in 0.5 Nm 5x mm / 5 x 25 mm 1-240V AC/DC FEATURES CF4SP Series accepts 5xmm fuse types 6mm wide, compact design Internal shorting channel Completely enclosed, no endplates CF4SP(L) version with LED for blown fuse indication No polarity required APPLICATIONS Control systems with fuse protection Control Circuits with alternating configuration with (CF4SPFT, CKT4SP, etc...) Wire Stripping Length 8 mm 8 mm Screwdriver Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Grey (standard) Blue BU Black BL CF4SP CF4SP/BU CF4SP/BL CF4SP(L)/6-60V CF4SP(L)/6-60V/BU CF4SP(L)/6-60V/BL 8 mm Flat Head 0.6 x 3.5 mm CF4SP(L)/1-240V CF4SP(L)/1-240V/BU CF4SP(L)/1-240V/BL CF4SPFT DIN Rail Internal Jumper CA722/2 0 CA722/3 0 CA722/4 0 pole CA722/ 0 pole CA722/0 CA722/2 0 CA722/3 0 CA722/4 0 CA722/ CA722/0 CA722/2 0 CA722/3 0 CA722/4 0 CA722/ CA722/0 Feed Through Terminal Same Profile as CF4SP Insulated Internal Jumper pole 0 pole CA742/2 0 CA742/3 0 CA742/4 0 CA742/ CA742/0 External Jumper CA714/2 0 CA714/3 0 CA714/4 0 pole CA714/ CA742/2 0 CA742/3 0 CA742/4 0 CA742/ CA742/0 CA714/2 0 CA714/3 0 CA714/4 0 CA714/ Marking Tag On Terminal MT6 1 Pk. (0 tags) MT6 1 Pk. (0 tags) On Fuse Carrier MT6 1 Pk. (0 tags) MT6 1 Pk. (0 tags) CA742/2 0 CA742/3 0 CA742/4 0 CA742/ CA742/0 CA714/2 0 CA714/3 0 CA714/4 0 CA714/ MT6 MT6 1 Pk. (0 tags) 1 Pk. (0 tags) E AWG mm V 00 V 30 A 32 A 4.5 lb-in 0.5 Nm Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

20 FUSE BLOCKS SCREW TERMINAL BLOCKS DOUBLE LEVEL FUSE BLOCKS, 5 x / 5 x 25 mm DDFL4U DDFL4U(E)/XX HIGHLIGHTS FEATURES Top Level fuse link for 5xmm/ 5x25mm fuse types Bottom Level Feed through terminal DDFL4U(E) version with LED for blown fuse indication in various voltages Blocks can be used in AC & DC applications APPLICATIONS Tight space fuse applications No need for additional Feed through terminal Dimensions & Weight Height w DIN Rail 35 x 7.5 mm Grey LED Voltage 24V AC/DC LED Voltage 48V AC/DC LED Voltage 1V AC/DC LED Voltage 2V AC/DC LED Voltage 440V AC 8 mm 67.4 mm 74.3 mm DDFL4U 8 mm Length 88 mm 88 mm 67.4 mm 74.3 mm Weight per piece 28.0 g 27.0 g E2514 E2514 Wire Size (solid / stranded) 22- AWG mm AWG mm 2 Voltage Rating 600 V 800 V AC/DC 600 V 800 V AC/DC Current Rating (top) 6.3 A 6.3 A 6.3 A 6.3 A Current Rating (bottom) 35 A 32 A 35 A 32 A Torque 7 lb-in 0.5 Nm 7 lb-in 0.5 Nm Insulation Material Fuse Specifications Fuse Type 5x mm / 5 x 25 mm 5x mm / 5 x 25 mm LED Indicator Voltage - 24V, 48V, 1V, 2V, 440V Wire Stripping Length 9.5 mm 9.5 mm Screwdriver Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm DDFL4U(E)/24 DDFL4U(E)/48 DDFL4U(E)/1 DDFL4U(E)/2 DDFL4U(E)/440 End Plate EPDDFL4U EPDDFL4U DIN Rail End Stop Internal Jumper pole CA702 CA802 CA2 25 CA729/2 0 CA729/3 CA729/4 CA729/ CA702 CA802 CA2 25 CA729/2 0 CA729/3 CA729/4 CA729/ Insulated Internal Jumper pole CA749/2 0 CA749/3 CA749/4 CA749/ CA749/2 0 CA749/3 CA749/4 CA749/ External Jumper CA711/2 0 CA711/3 CA711/4 pole CA711/ Marking Tag on terminal on lever MT8 MT2 1 Pk. (0 tags) 1 Pk. (0 tags) CA711/2 0 CA711/3 CA711/4 CA711/ MT8 MT2 1 Pk. (0 tags) 1 Pk. (0 tags) Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

21 DOUBLE LEVEL FUSE BLOCKS, 5 x / 5 x 25 mm WITH 2 CONNECTION POINTS DDFL4ULR DDFL4U(E)LR/XX FUSE BLOCKS SCREW TERMINAL BLOCKS HIGHLIGHTS Dimensions & Weight Height w DIN Rail 35 x 7.5 mm 8 mm 67.4 mm 74.3 mm 67.4 mm 74.3 mm Weight per piece 24.5 g 27.0 g Wire Stripping Length 9.5 mm 9.5 mm Screwdriver Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Grey LED Voltage 24V AC/DC LED Voltage 48V AC/DC LED Voltage 1V AC/DC LED Voltage 2V AC/DC LED Voltage 440V AC DDFL4ULR 8 mm Length 88 mm 88 mm E2514 E2514 Wire Size (solid / stranded) 22- AWG mm AWG mm 2 Voltage Rating 600 V 800 V AC/DC 600 V 800 V AC/DC Current Rating (top) 6.3 A 6.3 A 6.3 A 6.3 A Torque 7 lb-in 0.5 Nm 7 lb-in 0.5 Nm Insulation Material Fuse Specifications Fuse Type 5x mm / 5 x 25 mm 5x mm / 5 x 25 mm LED Indicator Voltage - 24V, 48V, 1V, 2V, 440V DDFL4U(E)LR/24 DDFL4U(E)LR/48 DDFL4U(E)LR/1 DDFL4U(E)LR/ 2 DDFL4U(E)LR/440 FEATURES Modified version of DDFL4U with 2 equipotential DDFL4U(E) version with LED for blown fuse indication in various voltages Blocks can be used in AC & DC applications APPLICATIONS Control Circuits with multi wire fuse application End Plate EPDDFL4U EPDDFL4U DIN Rail End Stop Internal Jumper pole CA702 CA802 CA2 25 CA729/2 0 CA729/3 CA729/4 CA729/ CA702 CA802 CA2 25 CA729/2 0 CA729/3 CA729/4 CA729/ Insulated Internal Jumper pole CA749/2 0 CA749/3 CA749/4 CA749/ CA749/2 0 CA749/3 CA749/4 CA749/ External Jumper CA711/2 0 CA711/3 CA711/4 pole CA711/ Marking Tag on terminal on lever MT8 MT2 1 Pk. (0 tags) 1 Pk. (0 tags) CA711/2 0 CA711/3 CA711/4 CA711/ MT8 MT2 1 Pk. (0 tags) 1 Pk. (0 tags) Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

22 FUSE BLOCKS SCREW TERMINAL BLOCKS FUSE BLOCKS, 1/4 x 1 and 1/4 x 11/4 in. CAFL4U CAFL4U(L)/XX CAFL4U(N) HIGHLIGHTS FEATURES CAFL4U Series accepts 1/4 x 1-1/4 (6.3x32mm) fuse types CAFL4U(L) versions with LED for blown fuse indication (24V, 48V, 1V, 2V) CAFL4U(N) version with Neon bulb for blown fuse indication Large marking area Blocks can be used in AC & DC applications APPLICATIONS Control systems with 1/4 x 1-1/4 fuse protection Dimensions & Weight Height w DIN Rail 35 x 7.5 mm 9 mm Length 72 mm 72 mm 72 mm 55.3 mm 63.0 mm Wire Stripping Length 9.5 mm 9.5 mm 9.5 mm Screwdriver Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Fuse Specifications Fuse Type 1/4 x 1 (6.3 x 32 mm) 1/4 x 1 (6.3 x 32 mm) 1/4 x 1 (6.3 x 32 mm) LED/Neon Indicator Voltage - 24V, 48V, 1V, 2V 1V - 240V Grey (standard) Blue BU Black BL LED Voltage 24V AC/DC LED Voltage 48V AC/DC LED Voltage 1V AC/DC LED Voltage 2V AC/DC Neon Bulb 1-300V AC/DC CAFL4U 25 CAFL4U/BU 25 CAFL4U/BL 25 9 mm 55.3 mm 63.0 mm CAFL4U(L)/24 25 CAFL4U(L)/48 25 CAFL4U(L)/1 25 CAFL4U(L)/ mm 55.3 mm 63.0 mm Weight per piece.5 g.5 g.5 g E E E Wire Size (solid / stranded) 22- AWG mm AWG mm AWG mm 2 Voltage Rating 600 V 00 V 600 V 00 V 600 V 00 V Current Rating 16 A 6.3 A 16 A 6.3 A 16 A 6.3 A Torque 7 lb-in 0.5 Nm 7 lb-in 0.5 Nm 7 lb-in 0.5 Nm Insulation Material CAFL4U(N) 25 End Plate EPCAFL4U EPCAFL4U EPCAFL4U DIN Rail CA701-15/S End Stop CA702 CA802 CA2 25 External Jumper CA716/2 CA716/3 CA716/4 pole CA716/ Marking Tag MT9 1 Pk. (0 tags) CA702 CA802 CA2 25 CA716/2 CA716/3 CA716/4 CA716/ MT9 1 Pk. (0 tags) CA702 CA802 CA2 25 CA716/2 CA716/3 CA716/4 CA716/ MT9 1 Pk. (0 tags) Fuses 1/4 x 1-1/4 (6.3 x 32mm) Current Slow Blow Fast Blow Rating Cat. No Cat. No 0.1A 0.1M6.3x32T 0.1M6x32F 0.2A 0.2M6.3x32T 0.2M6x32F 0.5A 0.5M6.3x32T 0.5M6x32F 1.0A 1.0M6.3x32T 1.0M6x32F 2.0A 2.0M6.3x32T 2.0M6x32F Current Slow Blow Fast Blow Rating Cat. No Cat. No 4.0A 4.0M6.3x32T 4.0M6x32F 5.0A 5.0M6.3x32T 5.0M6x32F 6.3A 6.3M6.3x32T 6.3M6x32F 8.0A 8.0M6.3x32T 8.0M6x32F.0A.0M6.3x32T.0M6x32F 22 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

23 COMPONENT CARRIER TERMINAL BLOCKS CCC4U CPF FUSE BLOCKS SCREW TERMINAL BLOCKS CPFL6-60V CPFL1-240V 27KΩ 27KΩ Dimensions Length 58.5 mm 28 mm 28 mm 28 mm Height w DIN Rail 35 x 7.5 mm mm Weight per piece.2 g 3.8 g 3.8 g 4.2 g 35 mm 35 mm 35 mm Wire Size (solid stranded) mm AWG mm 2 Voltage Rating 00 V AC/DC 600 V 00V AC/DC Current Rating * 1 A 1 A Insulation Material Carrier Specifications Component Type Component carrier base Plug module with diode Diode Type IN4007 Wire Stripping Length 8 mm mm Screwdriver Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Grey (standard) CCC4U E2514 LED Indicator Voltage CPF E AWG mm V 00V AC/DC A A Plug module for 5x mm fuse mm Flat Head 0.6 x 3.5 mm CPFL6-60V E AWG mm V 00V AC/DC A A Plug module for 5x mm fuse with LED indicator 6-60V AC/DC 1-240V AC/DC mm Flat Head 0.6 x 3.5 mm CPFL1-240V DIN Rail CA701-15/S End Stop CA702 CA802 CA3 Internal Jumpers Marking Tag pole 0 pole CA722/2 0 CA722/3 0 CA722/4 0 CA722/ CA722/0 MT6 1 Pk. (0 tags) MT6 1 Pk. (0 tags) MT6 1 Pk. (0 tags) MT6 1 Pk. (0 tags) * Current Rating is based on plug used. Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

24 FUSE HOLDERS FUSE HOLDERS, x 38 mm and CC Type x38 Midget Fuse Holders Pole Without With LED Fuse Max Voltage & Current Drawing Configuration Indication Indication Size IEC UL No. PCF & PCF LED 1-pole x38 690V AC / 32A 600V AC/DC / 30A 1 1-pole+N x38 690V AC / 32A 600V AC/DC / 30A 1 2-pole x38 690V AC / 32A 600V AC/DC / 30A 1 3-pole x38 690V AC / 32A 600V AC/DC / 30A 1 3-pole+N x38 690V AC / 32A 600V AC/DC / 30A 1 E EFD & EFD LED 1-pole x38 690V AC/DC / 32A 600V AC/DC / 30A 2 1-pole+N x38 690V AC/DC / 32A 600V AC/DC / 30A 2 2-pole x38 690V AC/DC / 32A 600V AC/DC / 30A 2 3-pole x38 690V AC/DC / 32A 600V AC/DC / 30A 2 3-pole+N x38 690V AC/DC / 32A 600V AC/DC / 30A 2 CC Type and J Type Fuse Holders Pole Without With LED Fuse UL Rating Drawing Configuration Indication Indication Size SCR Voltage/Amp. No. PCF CC & PCF CC LED 1-pole CC Type 0 ka 600V AC/DC / 30A 1 2-pole CC Type 0 ka 600V AC/DC / 30A 1 3-pole CC Type 0 ka 600V AC/DC / 30A 1 EFD CC & EFD CC LED 1-pole CC Type 0 ka 600V AC / 30A 2 2-pole CC Type 0 ka 600V AC / 30A 2 3-pole CC Type 0 ka 600V AC / 30A 2 E EFD J30 DC & EFD J30 DC LED 1-pole J-TYPE 0 ka 600V AC/DC / 30A 3 2-pole J-TYPE 0 ka 600V AC/DC / 30A 3 3-pole J-TYPE 0 ka 600V AC/DC / 30A 3 PV Type Fuse Holders Pole Without With LED Fuse Max Voltage & Current Drawing Configuration Indication Indication Size IEC UL No. PCF DC & PCF DC LED 1-pole x38 00V DC / 25A 00V DC / 25A 1 2-pole x38 00V DC / 25A 00V DC / 25A 1 EFH DC & EFH DC LED 1-pole x38 00V DC / 25A 00V DC / 25A 2 2-pole x38 00V DC / 25A 00V DC / 25A 2 EFH 14 DC & EFH 14 DC LED 1-pole x51 00V DC / A 00V DC / A 3 2-pole x51 00V DC / A 00V DC / A 3 E E IEC Type Fuse Holders Pole Without With LED Fuse Max Voltage & Current Drawing Configuration Indication Indication Size IEC UL No. EFD 14 & EFD 14 LED 1-pole x51 690V AC / A 600V AC/DC / A 3 1-pole+N x51 690V AC / A 600V AC/DC / A 3 2-pole x51 690V AC / A 600V AC/DC / A 3 3-pole x51 690V AC / A 600V AC/DC / A 3 3-pole+N x51 690V AC / A 600V AC/DC / A 3 E EFD 22 & EFD 22 LED 1-pole x58 690V AC / 0A 600V AC/DC / 0A 4 1-pole+N x58 690V AC / 0A 600V AC/DC / 0A 4 2-pole x58 690V AC / 0A 600V AC/DC / 0A 4 3-pole x58 690V AC / 0A 600V AC/DC / 0A 4 3-pole+N x58 690V AC / 0A 600V AC/DC / 0A 4 24 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

25 FUSE HOLDERS, x 38 mm and CC Type FUSE HOLDERS PCF Type EFD and EFH Type EFD 14 Type 56.8 EFD 22 Type NOTE: All dimensions are shown in millimeters. To convert to inches multiply by for The Modular Type PCF, EFD and EFH Modular fuse holders have a unique user configurable feature. By using the modular snap kit (parts sold individually) a customer can configure any pole configuration by inserting the connecting element (3 per pole) into the slot in the side of the fuse holder and then pushing them together and inserting the connecting shaft into the handle. NOTE: 1 kit suffices for the assembly of sets. 2 Pole Connection Kits Model No. Usable with EFD 8, EFD, EFH, PCF 8, PCF, EFD CC, PCF CC EFD 14, EFH EFD 22, EFD J30 3 Pole Connection Kits Model No. Usable with EFD 8, EFD, PCF 8, PCF, EFD CC, PCF CC EFD EFD 22, EFD J30 Auxiliary Switches Model No. Usable with Type PCF 1NO/1NC EFD 14 1NO/1NC EFD 22 1NO/1NC For Auxiliary switches to operate, a fuse with striker pin must be used. Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

26 DISCONNECT & TEST SCREW TERMINAL BLOCKS DISCONNECT AND TEST TERMINAL BLOCKS CDS6U CDS6U/TS CDS6U/FT HIGHLIGHTS FEATURES Slider Style Disconnect Terminals CDS6U - Standard Slider Disconnect CDS6U/TS - Slider Disconnect with integrated testing points CDS6U/FT - Same profile Feed-Through Separate Testing points allow insertion of standard test probes Disconnect is achieved b operating sliding link wit screw driver SLS2, SLS4 slide shorting link system QJ8/2 - Shorting Plug APPLICATIONS (see following page) Disconnect & Test Applications Measuring / Control Circuits Utility Instruments an Transformer Applications Meter Replacement External Current Measurement Switch Boards Dimensions & Weight Length 82 mm 82 mm 82 mm Height w DIN Rail 35 x 7.5 mm 8 mm 51.0 mm 59.2 mm Wire Stripping Length mm mm mm Screwdriver Flat Head 0.8 x 4 mm Flat Head 0.8 x 4 mm Flat Head 0.8 x 4 mm Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W End Plate CDS6U/TS CDS6U/TS/R CDS6U/TS/BU CDS6U/TS/BL CDS6U/TS/O CDS6U/TS/G CDS6U/TS/Y CDS6U/TS/W 51.0 mm 59.2 mm Weight per piece 33.8 g 33.8 g 21.2 g CB SCHEME Slider Disconnect Terminal 8 mm 51.0 mm 59.2 mm Slider Disconnect Terminal Including Test Sockets E2514 E2514 E2514 Wire Size (solid / stranded) 22-8 AWG AWG AWG Voltage Rating 600 V 800 V 600 V 800 V 600 V 800 V Current Rating 45 A 41 A 45 A 41 A 45 A 41 A Torque 14 lb-in 0.8 Nm 14 lb-in 0.8 Nm 14 lb-in 0.8 Nm Insulation Material CDS6U CDS6U/R CDS6U/BU CDS6U/BL CDS6U/O CDS6U/G CDS6U/Y CDS6U/W EPCDS6U EPCDS6U Feed Through Terminal with CDS6U profile CDS6U/FT CDS6U/FT/R CDS6U/FT/BU CDS6U/FT/BL CDS6U/FT/O CDS6U/FT/G CDS6U/FT/Y CDS6U/FT/W EPCDS6U DIN Rail End Stop CA702 CA702 CA702 CA802 CA802 CA802 CA2 25 CA2 25 CA2 25 Internal Jumper CA723/2 0 CA723/2 0 CA723/2 0 CA723/3 CA723/3 CA723/3 CA723/4 CA723/4 CA723/4 pole CA723/ CA723/ CA723/ Slide Shorting Link SLS2 SLS2 SLS3 25 SLS3 25 SLS4 25 SLS4 25 Insulated Test Socket grey red yellow blue black TPSLS 0 TPSLSR 0 TPSLSY 0 TPSLSBU 0 TPSLSBK 0 Lock Out Cap LCCDS LCCDS Shorting Plug QJ8/2 25 QJ8/2 25 Marking Tag MT6 1 Pk. (0 tags) MT6 1 Pk. (0 tags) MT8 1 Pk. (0 tags) 26 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

27 Example for CDS6U Test & Disconnect Terminal Block DISCONNECT & TEST SCREW TERMINAL BLOCKS Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

28 DISCONNECT & TEST SCREW TERMINAL BLOCKS BLADE/KNIFE STYLE DISCONNECT TERMINAL BLOCKS CKT4U CKT4U/4 HIGHLIGHTS FEATURES Knife / Blade Style Disconnect Terminals CKT4U - Standard Knife Disconnect CKT4U/4-4 Connection Knife Disconnect Specially designed socket headed screws act as fast monitoring points APPLICATIONS Disconnect & Test Applications Dimensions & Weight Height w DIN Rail 35 x 7.5 mm 48.3 mm 56.0 mm 54.3 mm 62.0 mm Wire Stripping Length 8 mm 8 mm Screwdriver Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W CKT4U CKT4U/R CKT4U/BU CKT4U/BL CKT4U/O CKT4U/G CKT4U/Y CKT4U/W Length 46.3 mm 65.0 mm Weight per piece.5 g 16.6 g CB SCHEME E2514 E2514 Wire Size (solid / stranded) 22- AWG 22- AWG mm AWG mm 2 Voltage Rating 600 V 600 V 800 V 600 V 800 V Current Rating 35 A 16 A 28 A A 17.5 A Torque 7 lb-in 7 lb-in 0.5 Nm 7 lb-in 0.5 Nm Insulation Material Knife Style Disconnect 2 Connections Knife Style Disconnect 4 Connections CKT4U/4 CKT4U/4/R CKT4U/4/BU CKT4U/4/BL CKT4U/4/O CKT4U/4/G CKT4U/4/Y CKT4U/4/W End Plate EPCKT4U EPCKT4U/4 DIN Rail End Stop CA702 CA802 CA2 25 External Jumper CA714/2 0 CA714/3 0 CA714/4 0 pole CA714/ MT6 1 Pk. (0 tags) CA702 CA802 CA2 25 CA714/2* 0 CA714/3* 0 CA714/4* 0 CA714/* Marking Tag MT6 1 Pk. (0 tags) * Insulated External shorting links can be used only in the upper level clamping unit of the Terminal Block. 28 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

29 BLADE/KNIFE STYLE DISCONNECT TERMINAL BLOCKS CKT4SP CF4SPFT DISCONNECT & TEST SCREW TERMINAL BLOCKS CF4SP HIGHLIGHTS Dimensions & Weight Height w DIN Rail 35 x 7.5 mm 46.0 mm 53.5 mm 46.0 mm 53.5 mm Wire Stripping Length 8 mm 8 mm Screwdriver Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W CKT4SP CKT4SP/R CKT4SP/BU CKT4SP/BL CKT4SP/O CKT4SP/G CKT4SP/Y CKT4SP/W Length 58.5 mm 58.5 mm Weight per piece 27.2 g g CB SCHEME Knife Style Disconnect Same profile as CF4SP Fuse Block E2514 E2514 Wire Size (solid / stranded) 24- AWG mm AWG mm 2 Voltage Rating 600 V 00 V 600 V 00 V Current Rating 30 A 28 A 30 A 32 A Torque 4.5 lb-in 0.5 Nm 4.5 lb-in 0.5 Nm Insulation Material DIN Rail End Stop CA702 CA802 CA2 25 Internal Jumper CA722/2 0 CA722/3 0 CA722/4 0 pole CA722/ 0 pole CA722/0 Insulated Internal Jumper pole 0 pole CA742/2 0 CA742/3 0 CA742/4 0 CA742/ CA742/0 External Jumper CA714/2 0 CA714/3 0 CA714/4 0 pole CA714/ MT6 1 Pk. (0 tags) Feed-Through Terminal Same profile as CF4SP Fuse Block CF4SPFT CF4SPFT/R CF4SPFT/BU CF4SPFT/BL CF4SPFT/O CF4SPFT/G CF4SPFT/Y CF4SPFT/W CA702 CA802 CA2 25 CA722/2 0 CA722/3 0 CA722/4 0 CA722/ CA722/0 CA742/2 0 CA742/3 0 CA742/4 0 CA742/ CA742/0 CA714/2 0 CA714/3 0 CA714/4 0 CA714/ Marking Tag MT6 1 Pk. (0 tags) Fuse Block 5x mm Fuse Type 8 mm 57.0 mm.3 mm g E AWG mm V 00 V AC/DC A A 4.5 lb-in 0.5 Nm 8 mm Flat Head 0.6 x 3.5 mm CF4SP CF4SP/BU CF4SP/BL CA722/2 0 CA722/3 0 CA722/4 0 CA722/ CA722/0 CA742/2 0 CA742/3 0 CA742/4 0 CA742/ CA742/0 CA714/2 0 CA714/3 0 CA714/4 0 CA714/ MT6 1 Pk. (0 tags) FEATURES Knife Style Disconnect Terminal CF4SPFT same profile Feed Through Terminal CF4SP same profile as Fuse Terminal, 5 x mm Fuse Types APPLICATIONS Control Systems with Fuse Protection Fused Control Circuits with alternating configurations (CF4SP, CF4SPFT, CGT4SP) Switch Boards Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

30 DISCONNECT & TEST SCREW TERMINAL BLOCKS SLIDER STYLE DISCONNECT TERMINAL BLOCKS CDTTU CDTTU-SH CDTTUFT HIGHLIGHTS FEATURES Slider Style Disconnect Terminals CDTTU - Standard Slider Disconnect CDTTU-SH - Double Disconnect Terminal CDTTUFT - Same profile Feed-Through Specially designed socket headed screws act as fast monitoring points Disconnect is achieved by operating sliding link with screw driver Dimensions & Weight Height w DIN Rail 35 x 7.5 mm Slider Disconnect Terminal 8 mm 58.7 mm 65.7 mm Slider Double Disconnect Terminal 1 Length 63 mm 63 mm 58.7 mm 65.7 mm Weight per piece 28.5 g 59.2 g Feed Through Terminal Slider Disconnect Profile 8 mm 63 mm 58.7 mm 65.7 mm 27.1 g APPLICATIONS Disconnect & Test Applications CB SCHEME E2514 E2514 E2514 Wire Size (solid / stranded) 16-8 AWG 1.5- mm AWG 16-8 AWG 1.5- mm AWG 1.5- mm 2 Voltage Rating 600 V 800 V 300 V 300 V 160 V 600 V 800 V Current Rating 41 A 57 A 25 A 25 A A 41 A 57 A Torque 14 lb-in 1.2 Nm 14 lb-in 14 lb-in 1.2 Nm 14 lb-in 1.2 Nm Insulation Material Wire Stripping Length 12 mm 12 mm Screwdriver Flat Head 1.0 x 5.5 mm Flat Head 1.0 x 5.5 mm Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W CDTTU CDTTU/R CDTTU/BU CDTTU/BL CDTTU/O CDTTU/G CDTTU/Y CDTTU/W CDTTU-SH CDTTU-SH/R CDTTU-SH/BU CDTTU-SH/BL CDTTU-SH/O CDTTU-SH/G CDTTU-SH/Y CDTTU-SH/W 12 mm Flat Head 1.0 x 5.5 mm CDTTUFT CDTTUFT/R CDTTUFT/BU CDTTUFT/BL CDTTUFT/O CDTTUFT/G CDTTUFT/Y CDTTUFT/W End Plate EPCDTTU EPCDTTU EPCDTTU DIN Rail End Stop CA702 CA802 CA2 25 External Jumper CA7/2 0 CA7/3 CA7/4 pole CA7/ CA702 CA802 CA2 25 CA7/2 0 CA7/3 CA7/4 CA7/ CA702 CA802 CA2 25 Shorting Plug QJ8/2 25 QJ8/2 25 QJ8/2 25 CA7/2 0 CA7/3 CA7/4 CA7/ Shorting Plug QJ8/2 25 QJ8/2 25 Marking Tag MT8 1 Pk. (0 tags) MT8 1 Pk. (0 tags) MT8 1 Pk. (0 tags) 30 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

31 LEVER STYLE DISCONNECT TERMINAL BLOCKS CSDL4U DDDL4U DISCONNECT & TEST SCREW TERMINAL BLOCKS HIGHLIGHTS Dimensions & Weight Height w DIN Rail 35 x 7.5 mm Lever Style Disconnect 8 mm 44.5 mm 52.0 mm Lever Style Disconnect Bottom Level Feed Through 8 mm Length 58 mm 88 mm 67.4 mm 74.3 mm Weight per piece 15.0 g 27.0 g FEATURES Lever Style Disconnect Terminals CSDL4U - Standard Lever Disconnect DDDL4U - Lever Disconnect with Lower Level Feed-Through Same profile as CAFL4U APPLICATIONS Disconnect Applications Wire Size (solid / stranded) 22- AWG mm 2 Voltage Rating 600 V 00 V Current Rating Top 14 A A Bottom - - Torque 7 lb-in 0.5 Nm Insulation Material Wire Stripping Length 9.5 mm 9.5 mm Screwdriver Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W End Plate CB SCHEME E2514 CSDL4U 0 CSDL4U/R 0 CSDL4U/BU 0 CSDL4U/BL 0 CSDL4U/O 0 CSDL4U/G 0 CSDL4U/Y 0 CSDL4U/W 0 EPCSFL4U E AWG 22- AWG mm V 600 V 800 V 6.3 A 14 A A 35 A 32 A 32 A 7 lb-in 7 lb-in 0.5 Nm DDDL4U DDDL4U/R DDDL4U/BU DDDL4U/BL DDDL4U/O DDDL4U/G DDDL4U/Y DDDL4U/W EPDDFL4U Isolation Partition PPCSFL4U DIN Rail End Stop Internal Jumper pole CA702 CA802 CA2 Insulated Jumper pole External Jumper CA711/2 0 CA711/3 CA711/4 pole CA711/ Marking Tag on terminal MT8 1 Pk. (0 tags) on lever MT2 1 Pk. (0 tags) CA702 CA802 CA2 CA729/2 0 CA729/3 CA729/4 CA729/ CA749/2 0 CA749/3 CA749/4 CA749/ CA711/2 0 CA711/3 CA711/4 CA711/ 2 MT8 1 Pk. (0 tags) MT2 1 Pk. (0 tags) Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

32 DISTRIBUTION SCREW TERMINAL BLOCKS SIDE FEED DISTRIBUTION TERMINAL BLOCKS CDB4/X(1) HIGHLIGHTS FEATURES Distribution blocks with various output configurations Stud/Bolt to secure incoming wire Internally connected terminals Side/center feed versions up to 1A Protective shield for incoming wire APPLICATIONS Simplified distribution systems Phase distribution application INSTALLATION NOTES Sum of outgoing wires not to exceed incoming current Higher output currents should be connected close to the input Dimensions & Weight Length Height w DIN Rail 6 Outputs 8 Outputs Outputs 12 Outputs 14 Outputs 22 Outputs 24 Outputs 35 x 7.5 mm General Specifications Wire Stripping Length Screwdriver Grey (standard) 6 Outputs 8 Outputs Outputs 12 Outputs 14 Outputs 22 Outputs 24 Outputs DIN Rail CB SCHEME A Distribution Terminal Block Side Feed 52.0 mm 58.0 mm 64.0 mm 70.0 mm 76.0 mm 0.0 mm 6.0 mm 43 mm 46.2 mm 53.7 mm E2514 Voltage Rating 600 V 800 V AC/DC Insulation Material INPUT Wire Size (solid / stranded) -8 AWG Current Rating A 64 A Torque 26 lb-in 2.0 Nm Wire Stripping Length 8 mm Screwdriver Hex Nut Driver M8 OUTPUT Wire Size (solid / stranded) 22- AWG mm 2 Current Rating 35 A 64 A* Torque 7 lb-in 0.5 Nm 8 mm Flat Head 0.6 x 3.5 mm CDB4/2(1) CDB4/3(1) CDB4/4(1) CDB4/5(1) 5 CDB4/6(1) 5 CDB4/(1) 5 CDB4/11(1) End Stop CA702 CA802 Marking Tag MT6 1 Pk. (0 tags) Phase Distribution Application with CDB Terminals M1 M2 M3 * Total output current of system 32 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

33 CENTER FEED DISTRIBUTION TERMINAL BLOCKS CDB4/X CDB6/X DISTRIBUTION SCREW TERMINAL BLOCKS CDB/X CDB25/X Dimensions & Weight A Distribution Terminal Block Center Feed 0A Distribution Terminal Block Center Feed 130A Distribution Terminal Block Center Feed 1A Distribution Terminal Block Center Feed 4 Outputs 8 Outputs 12 Outputs 16 Outputs Outputs 24 Outputs 44.0 mm 56.0 mm 68.0 mm 80.0 mm 96.0 mm 8.0 mm 48.0 mm 64.0 mm 80.0 mm 96.0 mm mm 92.0 mm mm mm mm mm - - Length 43 mm 48 mm 48 mm 49 mm Height w DIN Rail 35 x 7.5 mm 46.2 mm 53.7 mm 47.8 mm 55.5 mm 47.8 mm 55.5 mm 57.2 mm 64.7 mm General Specifications Voltage Rating CB SCHEME E2514 E2514 E2514 E V 800 V AC/DC 600 V 800 V AC/DC 600 V 800 V AC/DC 600 V 800 V AC/DC Insulation Material INPUT Wire Size (solid / stranded) Current Rating Torque -8 AWG AWG 6-25 mm 2 A 64 A 0 A 82 A 26 lb-in 2.0 Nm 35 lb-in 3.0 Nm 8-1/0 AWG -35 mm 2 6-2/0 AWG - mm A 114 A 1 A 1 A 53 lb-in 6.0 Nm 53 lb-in 6.0 Nm Wire Stripping Length 8 mm 9 mm 11 mm 14 mm Screwdriver Hex Nut Driver M8 Hex Nut Driver M Hex Nut Driver M13 Hex Nut Driver M15 OUTPUT Wire Size (solid / stranded) Current Rating (per output) Torque Wire Stripping Length Screwdriver 22- AWG mm AWG AWG 1.5- mm AWG 6-25 mm 2 35 A 32 A A 41 A 65 A 57 A 75 A 75 A 7 lb-in 0.5 Nm 14 lb-in 0.8 Nm 14 lb-in 1.2 Nm 22 lb-in 2.0 Nm 8 mm 9 mm 11 mm 14 mm Flat Head 0.6 x 3.5 mm Flat Head 0.8 x 4 mm Flat Head 0.8 x 4 mm Flat Head 1.0 x 5.5 mm Grey (standard) 4 Outputs 8 Outputs 12 Outputs 16 Outputs Outputs 24 Outputs CDB4/1 CDB4/2 CDB4/3 CDB4/4 CDB4/5 5 CDB4/6 5 CDB6/1 CDB6/2 CDB6/3 CDB6/ CDB/2 CDB/3 CDB/ CDB25/1 CDB25/2 CDB25/3 CDB25/ DIN Rail End Stop CA702 CA802 CA702 CA802 CA702 CA802 CA702 CA802 Marking Tag MT6 1 Pk. (0 tags) MT8 1 Pk. (0 tags) MT 1 Pk. (0 tags) MT12 1 Pk. (0 tags) Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

34 DISTRIBUTION MULTI I/O DISTRIBUTION TERMINAL BLOCKS SCREW TERMINAL BLOCKS CMDB6/X CMDB4/X Dimensions CMDB/X CMDB25/X 35 A Distribution Terminal Block A Distribution Terminal Block 65 A Distribution Terminal Block 85 A Distribution Terminal Block 13.5 mm 19.5 mm 25.5 mm 61.5 mm 17.5 mm 25.5 mm 33.5 mm 81.5 mm 21.5 mm 31.5 mm 41.5 mm 1.5 mm 26.0 mm 38.0 mm.0 mm 62.0 mm 43 mm 48 mm 48 mm 49 mm 46.2 mm 53.7 mm 47.8 mm 55.5 mm 47.8 mm 55.5 mm 57.2 mm 64.7 mm pole Length Height w DIN Rail 35 x 7.5 mm E2514 CB SCHEME Wire Size (solid / stranded) E2514 E2514 E AWG mm 22-8 AWG AWG 1.5- mm 12-4 AWG mm2 600 V 00V AC/DC 600 V 00V AC/DC 600 V 00V AC/DC 600 V 800V AC/DC Voltage Rating Current Rating 35 A 32 A A 41 A 65 A 57 A 85 A 1 A Torque 7 lb-in 0.5 Nm 14 lb-in 0.8 Nm 14 lb-in 1.2 Nm 22 lb-in 2.0 Nm Insulation Material Wire Stripping Length Screwdriver 8 mm 9 mm 11 mm 14 mm Flat Head 0.6 x 3.5 mm Flat Head 0.8 x 4 mm Flat Head 0.8 x 4 mm Flat Head 1.0 x 5.5 mm 4 Outputs Grey (standard) Red R Blue BU Black BL 6 Outputs Grey (standard) Red R Blue BU Black BL 8 Outputs Grey (standard) Red R Blue BU Black BL Outputs Grey (standard) Red R Blue BU Black BL 34 CMDB4/2 CMDB4/2/R CMDB4/2/BU CMDB4/2/BL CMDB4/3 CMDB4/3/R CMDB4/3/BU CMDB4/3/BL CMDB4/4 CMDB4/4/R CMDB4/4/BU CMDB4/4/BL CMDB4/ CMDB4//R CMDB4//BU CMDB4//BL CMDB6/2 CMDB6/2/R CMDB6/2/BU CMDB6/2/BL CMDB6/3 CMDB6/3/R CMDB6/3/BU CMDB6/3/BL CMDB6/4 CMDB6/4/R CMDB6/4/BU CMDB6/4/BL CMDB6/ CMDB6//R CMDB6//BU CMDB6//BL CMDB/2 CMDB/2/R CMDB/2/BU CMDB/2/BL CMDB/3 CMDB/3/R CMDB/3/BU CMDB/3/BL CMDB/4 CMDB/4/R CMDB/4/BU CMDB/4/BL CMDB/ CMDB//R CMDB//BU CMDB//BL CMDB25/2 CMDB25/2/R CMDB25/2/BU CMDB25/2/BL CMDB25/3 CMDB25/3/R CMDB25/3/BU CMDB25/3/BL CMDB25/4 CMDB25/4/R CMDB25/4/BU CMDB25/4/BL CMDB25/ CMDB25//R CMDB25//BU CMDB25//BL DIN Rail CA701-15/S CA701-15/S CA701-15/S CA701-15/S End Stop CA702 CA802 CA702 CA802 CA702 CA802 CA702 CA802 Marking Tag MT6 1 Pk. (0 tags) MT 1 Pk. (0 tags) MT12 1 Pk. (0 tags) 1 Pk. (0 tags) MT8 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

35 COMPACT HYBRID DISTRIBUTION TERMINAL BLOCKS CXDB35/ CXDB35/A DISTRIBUTION SPRING TERMINAL BLOCKS HIGHLIGHTS Dimensions & Weight Length Height w DIN Rail Weight per piece 35 x 7.5 mm General Specifications CB SCHEME INPUT 1 Flat Head Screw Input 4 Spring Clamp Outputs mm 54.3 mm 53.2 g E2514 Voltage Rating 600 V 00V AC/DC Insulation Material 1 Hex Screw Input 4 Spring Clamp Outputs mm 54.3 mm 53.2 g 600 V 00V AC/DC with Allen Screw E2514 FEATURES Hybrid Distribution Terminal Block Screw input (115A) 4 spring clamp outputs (4 x41a) Modular system Standard slot & hex screw versions Expandable with standard CX Series jumpers and terminal blocks Easy Installation APPLICATIONS Miniature Circuit Breaker (MCB) distribution Limited space distribution Output Expansion CXDB35/A Wire Size (solid / stranded) 14-2 AWG mm AWG mm 2 Current Rating 115 A 125 A 115 A 125 A Torque 25 lb-in 2.5 Nm 25 lb-in 2.5 Nm Wire Stripping Length 17 mm 17 mm Screwdriver Flat Head 1.0 x 5.5 mm Hex Screw M5 OUTPUT Wire Size (solid / stranded) 24-8 AWG 0.2- mm AWG 0.2- mm 2 Current Rating 41 A 41 A 41 A 41 A Wire Stripping Length 15 mm 15 mm Screwdriver Flat Head 0.8 x 4 mm Flat Head 0.8 x 4 mm JX6/3 2 x CX6 (see page 64) MCB Distribution Example Grey CXDB35/ DIN Rail End Clamp Jumpers Marking Tag CA702 CA802 CA3 JX6/2 0 JX6/3 JX6/4 JX6/ MT16 1 Pk. (0 tags) CXDB35/A CA702 CA802 CA3 JX6/2 0 JX6/3 JX6/4 JX6/ MT16 1 Pk. (0 tags) Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

36 DISTRIBUTION GROUNDING SYSTEM HIGHLIGHTS CENC4 GROUNDING NEUTRAL CLAMPS CENC16 CENC35 FEATURES 3 Clamp Sizes Panel Mount NES NEB6 DIN Rail Mount CA2 NEB Tin Plated Copper Busbars Busbar Current rating 140A Standard Color: Green Various colors APPLICATIONS Grounding Solution Terminating Neutral an Grounding Wires to a single busbar Distribution Applications Dimensions & Weight 7.5 mm Wire Stripping Length 12 mm 1 Screwdriver Flat Head 0.8 x 4 mm Flat Head 1.0 x 5.5 mm Green (standard) Black BL Blue BU Grey GR Yellow Y CENC4 CENC4/BL CENC4/BU CENC4/GR CENC4/Y 9.8 mm Length 23.3 mm 23.3 mm Weight per piece 8 g.5 g CB SCHEME CENC16 CENC16/BL CENC16/BU CENC16/GR CENC16/Y 14.5 mm 27.3 mm E E E Wire Size (solid / stranded) AWG AWG AWG -6 AWG AWG 8-2 AWG -35 mm 2 Voltage Rating 600 V 600 V 800 V 600 V 600 V 800 V 600 V 600 V 800 V Current Rating A A A Torque 14 lb-in 14 lb-in 0.8 Nm 17.5 lb-in 17.5 lb-in 2.0 Nm 25 lb-in 25 lb-in 2.5 Nm Insulation Material g 1 Flat Head 1.0 x 5.5 mm CENC35 CENC35/BL CENC35/BU CENC35/GR CENC35/Y Mounting Panel Mount Busbar NEB6 1 m NEB6 1 m NEB6 1 m (6 x ) Plastic Support with Fixing Screw NES NES Marking Tag MT5 1 Pk. (0 tags) MT6 1 Pk. (0 tags) MT6 1 Pk. (0 tags) Mounting DIN Rail Mount Busbar ( x 3 mm) NEB 1 m NEB 1 m NEB 1 m End Clamp/Busbar support for rail mounting CA2 CA2 Marking Tag MT5 1 Pk. (0 tags) MT6 1 Pk. (0 tags) NES CA2 MT6 1 Pk. (0 tags) CENC16 Panel Mount Assembly Example DIN Rail Mount Assembly Example NEB Busbar CENC4 NEB6 Busbar NES Plastic Support CENC16 CA2 Mounting Support 36 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

37 HIGH VOLTAGE TERMINAL BLOCKS CHV4U CHV6U CHVU HIGH VOLTAGE SCREW TERMINAL BLOCKS HIGHLIGHTS Dimensions & Weight Height w DIN Rail 35 x 7.5 mm 63.4 mm 70.8 mm Weight per piece 11.0 g 16.0 g 21.6 g Wire Stripping Length 12 mm 14 mm 14 mm Screwdriver Flat Head 0.6 x 3.5 mm Flat Head 0.8 x 4 mm Flat Head 0.8 x 4 mm Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W CHV4U CHV4U/R CHV4U/BU CHV4U/BL CHV4U/O CHV4U/G CHV4U/Y CHV4U/W 8 mm 63.4 mm 70.8 mm CHV6U CHV6U/R CHV6U/BU CHV6U/BL CHV6U/O CHV6U/G CHV6U/Y CHV6U/W mm Length 52 mm 52 mm 52 mm CB SCHEME 63.4 mm 70.8 mm E2514 E2514 E2514 Wire Size (solid / stranded) 22- AWG mm AWG AWG 0.2- mm 2 Voltage Rating 00 V V AC/DC 00 V V AC/DC 00 V V AC/DC Current Rating 35 A 32 A A 41 A 65 A 57 A Torque 7 lb-in 0.5 Nm 14 lb-in 0.8 Nm 14 lb-in 1.2 Nm Insulation Material CHVU CHVU/R CHVU/BU CHVU/BL CHVU/O CHVU/G CHVU/Y CHVU/W FEATURES High Voltage Terminal Blocks 00V UL Rating V IEC DC Rating Same Profile on all Current Ratings APPLICATIONS Solar Applications High Voltage Applications End Plate EPUSC EPUSC EPUSC Separator Plate SP2.5/4UN SP2.5/4UN SP2.5/4UN DIN Rail End Stop Internal Jumper pole 0 pole CA702 CA802 CA2 25 CA623/2 0 CA623/3 0 CA623/4 0 CA623/ CA702 CA802 CA2 25 CA624/2 0 CA624/3 0 CA624/4 0 CA624/ CA702 CA802 CA2 25 CA625/2 0 CA625/3 0 CA625/4 0 CA625/ Marking Tag MT6 1 Pk. (0 tags) MT8 1 Pk. (0 tags) MT 1 Pk. (0 tags) Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

38 THERMOCOUPLE SCREW TERMINAL BLOCKS HIGHLIGHTS CTT2.5UK/J/T/E THERMOCOUPLE BLOCKS FEATURES Thermocouple terminal blocks are used to extend thermocouple compensating lines in measuring circuits The current bar of the terminal block is made of the same material as the thermocouple wire (As per EN 60584/DINEN 60584) No loss of potential at the connection points Available types: K Type - Chromel (NiCr), Alumel (Ni) J Type - Iron (Fe), Constantan (CuNi) T Type - Copper (Cu), Constantan (CuNi) E Type - Chromel (NiCr), Constantan (CuNi) APPLICATIONS Measurement applications Dimensions & Weight Length Height w DIN Rail Weight per piece 35 x 7.5 mm Wire Stripping Length Screwdriver Grey U Type J Type T Type G Type CB SCHEME mm 43 mm 46.2 mm 53.7 mm 12.4 g Wire Size (solid / stranded) AWG mm 2 Voltage Rating 00 V AC/DC Current Rating A Torque 7 lb-in / 0.4 Nm Insulation Material CTT2.5UX 8 mm Flat Head 0.5 x 3 mm CTT2.5UK CTT2.5UJ CTT2.5UT CTT2.5UG End Plate EP2.5/4UN Partition Plate PP2.5/4UN DIN Rail End Stop Marking Tag CA702 0 CA802 0 INCLUDED Typical Temperature Measuring Circuit Thermocouple Terminal Block Compensating Cable Supply Cable Thermocouple (Sensor) Measuring Instrument Thermocouple Terminal Block Reference Junction 38 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

39 TAB CONNECTION TERMINAL BLOCKS CTC4U TAB CONNECTION SCREW TERMINAL BLOCKS HIGHLIGHTS Dimensions & Weight Length Height w DIN Rail Weight per piece 35 x 7.5 mm 47 mm 51.2 mm 58.8 mm 8.0 g FEATURES Standard tab connection terminals Quick-Connect Tabs APPLICATIONS Transportation Railroad Applications CB SCHEME Wire Size (solid stranded) Voltage Rating Current Rating Tab (Blade) Size Wire Stripping Length Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W mm AWG 300 V 32 A 6.3 x 0.8 mm Insulation Material 9 mm CTC4U 0 CTC4U/R 0 CTC4U/BU 0 CTC4U/BL 0 CTC4U/O 0 CTC4U/G 0 CTC4U/Y 0 CTC4U/W 0 End Plate DIN Rail End Stop Test Socket EPCTC4U CA702 0 CA802 0 CA707/TS/01 Marking Tag MT6 1 Pk. (0 tags) Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

40 SPRING LOADED SCREW TERMINAL BLOCKS FEED-THROUGH TERMINAL BLOCKS CTS4USC CTS6USC CTSUSC HIGHLIGHTS FEATURES Feed Through Terminals with Springs below clamps High torque screws Built-in springs guarantee secure connection even when screw is not tight 4 mm,, mm terminal blocks with same size profile It is recommended to use hook type lugs/ ferrules for wire termination Both, high-torque screws and built-in spring Various disconnect terminals APPLICATIONS Vibration Applications Projects which follow the following safety regulations: Electric Supply Standard (ESI) British CEGB Standard NTPC standard Dimensions & Weight Height w DIN Rail 35 x 7.5 mm 63.4 mm 70.8 mm Weight per piece 13.0 g.0 g 12.6 g Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W CTS4USC CTS4USC/R CTS4USC/BU CTS4USC/BL CTS4USC/O CTS4USC/G CTS4USC/Y CTS4USC/W 8 mm 63.4 mm 70.8 mm CTS6USC CTS6USC/R CTS6USC/BU CTS6USC/BL CTS6USC/O CTS6USC/G CTS6USC/Y CTS6USC/W mm Length 52 mm 52 mm 52 mm CB SCHEME 63.4 mm 70.8 mm E2514 E2514 E2514 Wire Size (solid / stranded) 22- AWG mm AWG AWG 0.2- mm 2 Voltage Rating 600 V V AC/DC 00 V V AC/DC 00 V V AC/DC Current Rating 35 A 32 A A 41 A 65 A 57 A Torque 7 lb-in 0.5 Nm 14 lb-in 0.8 Nm 14 lb-in 1.2 Nm Insulation Material Feed Through Terminal Spring Loaded Feed Through Terminal Spring Loaded Wire Stripping Length 12 mm 14 mm Screwdriver Flat Head 0.6 x 3.5 mm Flat Head 0.8 x 4 mm Feed Through Terminal Spring Loaded 14 mm Flat Head 0.8 x 4 mm CTSUSC CTSUSC/R CTSUSC/BU CTSUSC/BL CTSUSC/O CTSUSC/G CTSUSC/Y CTSUSC/W End Plate EPUSC EPUSC EPUSC Separator Plate SP2.5/4UN SP2.5/4UN SP2.5/4UN DIN Rail End Stop Hook Type Lug / Ferrule Pre Assembled Jumpers Marking Tag CA702 0 CA702 0 CA702 0 CA802 CA802 CA802 CA2 CA2 CA2 1.5 mm 2 CA604/1 0 CA604/1 0 CA604/ mm 2 CA604/2 0 CA604/2 0 CA604/2 0 4 mm 2 CA604/5 0 CA604/5 0 CA604/5 0 2 CA604/4 0 CA604/4 0 mm 2 CA604/3 0 CA625/2 0 pole CA623/2 0 CA623/3 0 CA623/4 0 CA623/ MT6 1 Pk. (0 tags) CA624/2 0 CA624/3 0 CA624/4 0 CA624/ MT8 1 Pk. (0 tags) CA625/3 0 CA625/4 0 CA625/ MT 1 Pk. (0 tags) 40 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

41 DISCONNECT TERMINAL BLOCKS CKT4SPSC CDS6U/SC CDTTUSC SPRING LOADED SCREW TERMINAL BLOCKS CDTTUFTSC Dimensions & Weight Length Height w DIN Rail Weight per piece 35 x 7.5 mm Knife Disconnect Spring Loaded Terminal 46.0 mm 53.5 mm Slider Disconnect Spring Loaded Terminal 8 mm 51.0 mm 59.2 mm Slider Disconnect Spring Loaded Terminal 8 mm 58.5 mm 82 mm 63 mm 58.7 mm 65.7 mm 14.1 g 30.9 g 31.0 g Feed Through Terminal Same profile as CDTTUSC 8 mm 63 mm 58.7 mm 65.7 mm 25.4 g CB SCHEME E2514 E2514 E2514 E AWG 1.5- mm 2 Wire Size (solid / stranded) 24- AWG mm AWG AWG 1.5- mm 2 Voltage Rating 600 V 00V AC/DC 600 V 800V AC/DC 600 V 800V AC/DC Current Rating 30 A 28 A 45 A 41 A 41 A 57 A Torque 4.5 lb-in 0.5 Nm 14 lb-in 0.8 Nm 14 lb-in 1.2 Nm Insulation Material Wire Stripping Length 8 mm mm Screwdriver Flat Head 0.6 x 3.5 mm Flat Head 0.8 x 4 mm 12 mm Flat Head 1.0 x 5.5 mm 600 V 800V AC/DC 41 A 57 A 14 lb-in 1.2 Nm 12 mm Flat Head 1.0 x 5.5 mm Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W CKT4SPSC CKT4SPSC/R CKT4SPSC/BU CKT4SPSC/BL CKT4SPSC/O CKT4SPSC/G CKT4SPSC/Y CKT4SPSC/W CDS6U/SC CDS6U/SC/R CDS6U/SC/BU CDS6U/SC/BL CDS6U/SC/O CDS6U/SC/G CDS6U/SC/Y CDS6U/SC/W CDTTUSC CDTTUSC/R CDTTUSC/BU CDTTUSC/BL CDTTUSC/O CDTTUSC/G CDTTUSC/Y CDTTUSC/W CDTTUFTSC CDTTUFTSC/R CDTTUFTSC/BU CDTTUFTSC/BL CDTTUFTSC/O CDTTUFTSC/G CDTTUFTSC/Y CDTTUFTSC/W End Plate EPCDS6U EPCDTTU EPCDTTU DIN Rail End Stop Pre Assembled Jumpers pole 0 pole CA702 0 CA802 CA2 CA722/2 0 CA722/3 0 CA722/4 0 CA722/ CA722/0 Insulated Jumpers CA742/2 0 CA742/3 0 CA742/4 0 pole CA742/ 0 pole CA742/ CA702 0 CA802 CA2 CA723/2 0 CA723/3 CA723/4 CA723/ External Jumpers CA714/2 0 CA714/3 0 CA714/4 0 pole CA714/ CA702 0 CA802 CA2 CA7/2 0 CA7/3 CA7/4 CA7/ CA702 0 CA802 CA2 CA7/2 0 CA7/3 CA7/4 CA7/ Shorting Plug QJ8/2 25 Marking Tag MT6 1 Pk. (0 tags) MT8 1 Pk. (0 tags) MT8 1 Pk. (0 tags) MT8 1 Pk. (0 tags) Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

42 ELECTRONIC COMPONENTS SCREW TERMINAL BLOCKS DIODE CIRCUIT TERMINAL BLOCKS CDL4U(E)D1/D2 CDL4U(E)D3 CDL4U(E)DD1/DD2 HIGHLIGHTS FEATURES Various configurations of Electronic components soldered into CDL4U double level terminal block Various Diode / Resistor combinations 4 connection points for convenient wiring Terminal Block with open current bar CDL4U(O) can be individually soldered with electronic components Spacer CDL4USP can be used to cover overlapping components when soldered individually APPLICATIONS Reverse polarity protection Lamp testing CDL4U SPACER Dimensions & Weight Height w DIN Rail 35 x 7.5 mm Length 55.5 mm 55.5 mm 55.5 mm 55.7 mm 63.1 mm Electronic Component Specifications Diode Type 1N N N 4007 Diode Reverse Voltage / Current 00 V / 1 A 00 V / 1 A 00 V / 1 A Indicator Voltage Wire Stripping Length 9 mm 9 mm 9 mm Screwdriver Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Grey CDL4U(E)D1 0 CDL4U(E)D mm 63.1 mm CDL4U(E)D mm 63.1 mm Weight per piece 13.6 g 13.4 g 13.4 g End Plate CB SCHEME CDL4U(E)D CDL4U(E)D2 Arc Suppression circuit diode for contactors and solenoid valves E2514 E2514 E2514 Wire Size (solid / stranded) 22- AWG mm AWG mm AWG mm 2 Voltage Rating 600 V 300 V 0 V AC 600 V 300 V 0 V AC 600 V 300 V 0 V AC Current Rating 35 A 25 A 32 A 35 A 25 A 32 A 35 A 25 A 32 A Torque 7 lb-in 0.5 Nm 7 lb-in 0.5 Nm 7 lb-in 0.5 Nm Insulation Material EPCDL4U EPCDL4U CDL4U(E)DD1 0 CDL4U(E)DD2 0 EPCDL4U Spacer CDL4USP CDL4USP CDL4USP CDL4U(E)D3 Diode reverse polarity protection CDL4U(E)DD CDL4U(E)DD2 Diode circuit for lamp testing 2 2 DIN Rail End Stop CA702 CA CA702 CA CA702 CA802 Spacer to cover electronic components which stick out of CDL4U(O) Internal Jumper pole CA727/2 0 CA727/3 0 CA727/4 0 CA727/ CA727/2 0 CA727/3 0 CA727/4 0 CA727/ CA727/2 0 CA727/3 0 CA727/4 0 CA727/ CDL4USP Marking Tag MT2 1 Pk. (0 tags) MT2 1 Pk. (0 tags) MT2 1 Pk. (0 tags) 42 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

43 DIODE CIRCUIT TERMINAL BLOCKS CDL4U(E)DD3/DD4 CDL4U(E)D4 ELECTRONIC COMPONENTS SCREW TERMINAL BLOCKS CDL4U(E)DD CDL4U(E)DD Dimensions & Weight Height w DIN Rail 35 x 7.5 mm Length 55.5 mm 55.5 mm 55.5 mm 55.7 mm 63.1 mm Electronic Component Specifications Diode Type 1N N N 4007 Diode Reverse Voltage / Current 00 V / 1 A 00 V / 1 A 00 V / 1 A Indicator Voltage Wire Stripping Length 9 mm 9 mm 9 mm Screwdriver Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Grey CDL4U(E)DD3 0 CDL4U(E)DD mm 63.1 mm CDL4U(E)D4/12V 0 CDL4U(E)D4/24V mm 63.1 mm Weight per piece 13.6 g 13.6 g 13.6 g CB SCHEME CDL4U(E)DD4 Diode circuit for lamp testing CDL4U(E)D4 Diode circuit for lamp testing with LED series resistance CDL4U(E)DD5 Diode circuit for lamp testing with LED series resistance E2514 E2514 E2514 Wire Size (solid / stranded) 22- AWG mm AWG mm AWG mm 2 Voltage Rating 600 V 300 V 0 V AC 600 V 300 V 0 V AC 600 V 300 V 0 V AC Current Rating 35 A 25 A 32 A 35 A 25 A 32 A 35 A 25 A 32 A Torque 7 lb-in 0.5 Nm 7 lb-in 0.5 Nm 7 lb-in 0.5 Nm Insulation Material CDL4U(E)DD5/12V 0 CDL4U(E)DD5/24V 0 End Plate EPCDL4U EPCDL4U EPCDL4U Spacer CDL4USP CDL4USP CDL4USP DIN Rail End Stop CA702 CA CA702 CA CA702 CA802 Internal Jumper pole CA727/2 0 CA727/3 0 CA727/4 0 CA727/ CA727/2 0 CA727/3 0 CA727/4 0 CA727/ CA727/2 0 CA727/3 0 CA727/4 0 CA727/ Marking Tag MT2 1 Pk. (0 tags) MT2 1 Pk. (0 tags) MT2 1 Pk. (0 tags) Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

44 ELECTRONIC COMPONENTS SCREW TERMINAL BLOCKS HIGHLIGHTS CDL4U(E)N1 INDICATOR TERMINAL BLOCKS CDL4U(E)LD5 CDL4U(E)LD3 FEATURES Various configurations of Electronic components soldered into CDL4U double level terminal block Various Indicator options AC voltage indicator DC voltage indicator LED and Neon lamp versions 4 connection points for convenient wiring Terminal Block with open current bar CDL4U(O) can be individually soldered with electronic components Spacer CDL4USP can be used to cover overlapping components when soldered individually APPLICATIONS AC voltage indication DC voltage indication Dimensions & Weight Height w DIN Rail 35 x 7.5 mm Length 55.5 mm 55.5 mm 55.5 mm 55.7 mm 63.1 mm Electronic Component Specifications Diode Type 1N N N 4007 Diode Reverse Voltage / Current 00 V / 1 A 00 V / 1 A 00 V / 1 A Indicator Voltage 1, 2 VAC 24, 48, 1, 2 VAC 12, 24 VAC Wire Stripping Length 9 mm 9 mm 9 mm Screwdriver Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Grey CDL4U(E)N1/1V 0 CDL4U(E)N1/2V mm 63.1 mm CDL4U(E)LD5/24V 0 CDL4U(E)LD5/48V 0 CDL4U(E)LD5/1V 0 CDL4U(E)LD5/2V mm 63.1 mm Weight per piece 13.6 g 12.4 g 12.4 g E2514 E2514 E2514 Wire Size (solid / stranded) 22- AWG mm AWG mm AWG mm 2 Voltage Rating 600 V 300 V 0 V AC 600 V 300 V 0 V AC 600 V 300 V 0 V AC Current Rating 35 A 25 A 32 A 35 A 25 A 32 A 35 A 25 A 32 A Torque 7 lb-in 0.5 Nm 7 lb-in 0.5 Nm 7 lb-in 0.5 Nm End Plate CB SCHEME CDL4U(E)N1 AC Voltage indicator with Neon lamp 2 Insulation Material CDL4U(E)LD5 AC Voltage indicator with LED 3-4 EPCDL4U EPCDL4U +1 CDL4U(E)LD3 AC Voltage indicator with LED CDL4U(E)LD3/12V 0 CDL4U(E)LD3/24V 0 EPCDL4U Spacer CDL4USP CDL4USP CDL4USP DIN Rail End Stop CA702 CA CA702 CA CA702 CA802 Internal Jumper pole CA727/2 0 CA727/3 0 CA727/4 0 CA727/ CA727/2 0 CA727/3 0 CA727/4 0 CA727/ CA727/2 0 CA727/3 0 CA727/4 0 CA727/ Marking Tag MT2 1 Pk. (0 tags) MT2 1 Pk. (0 tags) MT2 1 Pk. (0 tags) 44 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

45 INDICATOR TERMINAL BLOCKS CDL4U(E)LD1/LD2 CDL4U(E)LD4 CDL4U(E)L1/L2 ELECTRONIC COMPONENTS SCREW TERMINAL BLOCKS CDL4U(O) CDL4U(E)LD CDL4U(E)L CDL4U(E)LD CDL4U(O) CDL4U(E)LD2 CDL4U(E)L2 Dimensions & Weight DC Voltage Indicator with LED AC Voltage indicator with LED DC Voltage Indicator with LED Terminal Block with open current to solder custom components Length 55.5 mm 55.5 mm 55.5 mm 55.5 mm Height w DIN Rail 35 x 7.5 mm 55.7 mm 63.1 mm 55.7 mm 63.1 mm Weight per piece 12.4 g 12.4 g 12.4 g 13.0 g E2514 E2514 E2514 E2514 Wire Size (solid / stranded) 22- AWG mm AWG mm AWG mm AWG mm 2 Voltage Rating 600 V 300 V 0 V AC 600 V 300 V 0 V AC 600 V 300 V 0 V AC 600 V 300 V 0 V AC Current Rating 35 A 25 A 32 A 35 A 25 A 32 A 35 A 25 A 32 A 35 A 35 A 32 A Torque 7 lb-in 0.5 Nm 7 lb-in 0.5 Nm 7 lb-in 0.5 Nm 7 lb-in 0.5 Nm Insulation Material Electronic Component Specifications Diode Type 1N N N N 4007 Diode Reverse Voltage / Current 00 V / 1 A 00 V / 1 A 00 V / 1 A 00 V / 1 A Indicator Voltage 12, 24 VAC 24, 48 VAC 6, 24 VAC - Wire Stripping Length 9 mm 9 mm 9 mm 9 mm Screwdriver Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm CB SCHEME Grey CDL4U(E)LD1/12V 0 CDL4U(E)LD1/24V 0 CDL4U(E)LD2/12V 0 CDL4U(E)LD2/24V 0 CDL4U(E)LD4/24V 0 CDL4U(E)LD4/48V mm 63.1 mm CDL4U(E)L1/6V 0 CDL4U(E)L1/24V 0 CDL4U(E)L2/6V 0 CDL4U(E)L2/24V mm 63.1 mm CDL4U(O) 0 End Plate EPCDL4U EPCDL4U EPCDL4U EPCDL4U Spacer CDL4USP CDL4USP CDL4USP CDL4USP DIN Rail End Stop CA702 CA CA702 CA CA702 CA CA702 CA802 Internal Jumper pole CA727/2 0 CA727/3 0 CA727/4 0 CA727/ CA727/2 0 CA727/3 0 CA727/4 0 CA727/ CA727/2 0 CA727/3 0 CA727/4 0 CA727/ CA727/2 0 CA727/3 0 CA727/4 0 CA727/ Marking Tag MT2 1 Pk. (0 tags) MT2 1 Pk. (0 tags) MT2 1 Pk. (0 tags) MT2 1 Pk. (0 tags) Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

46 ELECTRONIC COMPONENTS SCREW TERMINAL BLOCKS SURGE SUPPRESSOR TERMINAL BLOCKS CDL4U(E)LA CDL4U(E)3LA CDL4U(E)RC HIGHLIGHTS FEATURES Various solutions to protect single lines against surges Lightning Arrestors (CDL4U(E)LA) MOVs (CDL4U(E)MOV) RC Circuits (CDL4U(E)RC) Suppressor Diode (CDL4U(E)SD) APPLICATIONS Surge suppressor applications Equipment protection CB SCHEME Dimensions & Weight 18 mm 18 mm 18 mm Length 55.5 mm 55.5 mm 55.5 mm Height w DIN Rail 35 x 7.5 mm CDL4U(E)LA Lightning Arrestor to protect data and signal lines 55.7 mm 63.1 mm / Component Specifications Wire Size (solid / stranded) 22- AWG 22- AWG 22- AWG Insulation Material Nominal Current A 5 A - Peak Current - - 2kA-6.5kA (8/ms) Voltage Rating 75, 90, 230, 600, 00 V DC 90, 230, 3, 600 V DC 30, 60, 75, 130, 275, 460, 5, 625, 680 V AC Wire Stripping Length 9 mm 9 mm 9 mm Screwdriver Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Grey CDL4U(E)LA/75V CDL4U(E)LA/90V CDL4U(E)LA/230V CDL4U(E)LA/600V CDL4U(E)LA/00V CDL4U(E)3LA lightning arrestor to protect line / line and line / earth surges 55.7 mm 63.1 mm CDL4U(E)3LA/90V CDL4U(E)3LA/230V CDL4U(E)3LA/3V CDL4U(E)3LA/600V CDL4U(E)RC RC circuit to protect DC solenoid valves and contactors 55.7 mm 63.1 mm Weight per piece 30.0 g 34.2 g 22.4 g Nominal Discharge Current KA (8/ms) KA (8/ms) - Response Time 0 ns 0 ns < 25 ns Capacitance < 1.5 pf < 1.0 pf 0 -,000 pf 0.1 mf CDL4U(E)RC mf CDL4U(E)RC0.22 End Plate EPCDL4U EPCDL4U EPCDL4U Spacer CDL4USP CDL4USP CDL4USP DIN Rail End Stop CA702 CA CA702 CA CA702 CA802 Marking Tag MT2 1 Pk. (0 tags) MT2 1 Pk. (0 tags) MT2 1 Pk. (0 tags) 46 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

47 SURGE SUPPRESSOR TERMINAL BLOCKS CDL4U(E)MOV CTLG2.5(E)MOV ELECTRONIC COMPONENTS SCREW TERMINAL BLOCKS CDL4U(E)SD SDUA SDUK Dimensions & Weight CB SCHEME Height w DIN Rail 35 x 7.5 mm CDL4U(E)MOV MOV for voltage surge spike protection 12 mm 55.7 mm 63.1 mm / Component Specifications Wire Size (solid / stranded) 22- AWG 22- AWG 22- AWG Insulation Material Nominal Current - 5 A - Peak Current 2kA-6.5kA (8/ms) 2kA-6.5kA (8/ms) - Grey CDL4U(E)MOV30V CDL4U(E)MOV60V CDL4U(E)MOV75V CDL4U(E)MOV130V CDL4U(E)MOV275V CDL4U(E)MOV 460V CDL4U(E)MOV5V CDL4U(E)MOV625V CDL4U(E)MOV680V CTLG2.5(E)MOV MOV for voltage surge spike protection 66.0 mm 74.0 mm CTLG2.5(E)MOV30V CTLG2.5(E)MOV60V CTLG2.5(E)MOV75V CTLG2.5(E)MOV130V CTLG2.5(E)MOV275V 12 mm Length 55.5 mm 87.5 mm 55.5 mm 55.7 mm 63.1 mm Weight per piece 19.2 g 14.8 g 18.0 g Nominal Discharge Current - KA (8/ms) 1.5 KA Response Time < 25 ns < 25 ns 1 ns (D.C) / 5 ns (A.C) Capacitance 0 -,000 pf 0 -,000 pf - Voltage Rating 30, 60, 75, 130, 275, 460, 5, Up to 275V 30, 60, 75, 130, 275, 460, 625, 680 V AC 5, 625, 680 V AC Wire Stripping Length 9 mm 9 mm 9 mm Screwdriver Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm SDB Suppressor Diode to fine protect sensors, contacts, etc DC - Anode CDL4U(E)SDUA12VDC CDL4U(E)SDUA24VDC CDL4U(E)SDUA48VDC DC - Cathode CDL4U(E)SDUK12VDC CDL4U(E)SDUK24VDC CDL4U(E)SDUK48VDC AC CDL4U(E)SDB12VAC CDL4U(E)SDB24VAC CDL4U(E)SDB48VAC CDL4U(E)SDB160VAC End Plate EPCDL4U EPCTLG2.5 EPCDL4U Spacer CDL4USP CDL4USP DIN Rail End Stop CA702 CA CA702 CA CA702 CA802 Marking Tag MT2 1 Pk. (0 tags) MT2 1 Pk. (0 tags) MT2 1 Pk. (0 tags) Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

48 ACCESSORIES SCREW TERMINAL BLOCKS Internal Jumper Insulated Internal Jumper External Jumper JUMPER / SHORTING LINKS Current Bar Shorting Sleeve & Screws CTS2.5U-N CTS4U-N, CCC4U, CMC1-2, CMC2-2, CDL4UN, CDL4U(I.S) CDLG4, CDLG(I.S), CF4SP, CF4SP(L), CKT4U 1, CKT4SP CTS6U, CDS6U CDTTU 1, CDTTU-SH 1 CTSU CTS16U CTS25UN CTS35UN CTS/70N CTS95/1N CTL2.5U, CTL2.5U(L) CTL2.5U-H, CTL2.5U-H(L) CTL2.5U(I.S) ODL4U CDL4U(E) CMT4 CMB4 CDLG2.5 CTLG2.5 CF4U 1 CF4U(L) 1 DDFL4U, DDFL4U(E) DDFL4ULR, DDFL4ULR(E) CSDL4U 1, DDDL4U CAFL4U 1 CAFL4U(L) 1 CAFL4U(N) 1 CHV4U CTS4USC CHV6U CTS6USC CHVU CTSUSC Poles 2 Pole CA721/2 0 CA741/2 0 CA717/2 0 CA703/ Pole CA721/3 0 CA741/3 0 CA717/3 0 CA704/ Pole CA721/4 0 CA741/4 0 CA717/4 0 CA705/01 0 CA707/S/Q/01 0 Pole CA721/ CA741/ CA717/ CA731/ 0 0 Pole CA721/0 CA741/0 - - CA731/0 2 Pole CA722/2 0 CA742/2 0 CA714/2 0 CA703/1 0 3 Pole CA722/3 0 CA742/3 0 CA714/3 0 CA704/1 0 4 Pole CA722/4 0 CA742/4 0 CA714/4 0 CA705/1 0 CA707/S/Q/01 0 Pole CA722/ CA742/ CA714/ CA732/ 0 0 Pole CA722/0 CA742/0 - - CA732/0 2 Pole CA723/2 0 CA743/2 0 CA7/2 0 CA703/2 0 3 Pole CA723/3 CA743/3 CA7/3 CA704/2 0 4 Pole CA723/4 CA743/4 CA7/4 CA705/2 0 CA707/S/Q/1 0 Pole CA723/ CA743/ CA7/ CA733/ 2 Pole CA724/2 0 CA744/2 0 CA718/2 0 CA703/3 0 3 Pole CA724/3 CA744/3 CA718/3 CA704/3 0 4 Pole CA724/4 CA744/4 CA718/4 CA705/3 0 Pole CA724/ CA744/ CA718/ CA734/ 2 Pole CA751/2 CA761/2 - - CA703/8 0 3 Pole CA751/3 CA761/3 - - CA704/8 0 4 Pole CA751/4 CA761/4 - - CA705/8 0 Pole CA751/ CA761/ - - CA739/ 2 Pole CA725/2 CA745/2 - - CA703/4 0 3 Pole CA725/3 CA745/3 - - CA704/4 0 4 Pole CA725/4 CA745/4 - - CA705/4 0 Pole CA725/ CA745/ - - CA735/ 0 2 Pole CA771/2 CA781/2 - - CA703/ 0 3 Pole CA771/3 CA781/3 - - CA704/ 0 CA707/S/Q/1 0 CA707/S/Q/1 0 CA707/S/Q/2 0 4 Pole CA771/4 CA781/4 - - CA705/ 0 CA707/S/Q/2 0 Pole CA771/ CA781/ - - CA770/ 2 Pole CA628/ Pole CA628/ Pole CA629/ Pole CA629/ Pole CA722/ CA715/2 0 CA703/1 0 3 Pole CA722/ CA715/3 0 CA704/1 0 4 Pole CA722/ CA715/4 0 CA705/1 0 CA707/S/Q/01 0 Pole CA722/ - - CA715/ CA732/ 0 0 Pole 2 CA722/ CA732/0 2 Pole CA727/2 0 CA747/2 0 CA714/2 0 CA703/1 0 3 Pole CA727/3 0 CA747/3 0 CA714/3 0 CA704/1 0 4 Pole CA727/4 0 CA747/4 0 CA714/4 0 CA705/1 0 CA607/S/Q 0 Pole CA727/ CA747/ CA714/ CA732/ 0 0 Pole 2 CA727/0 CA747/0 - - CA732/0 2 Pole CA627/ CA715/2 0 CA703/1 0 3 Pole CA627/ CA715/3 0 CA704/1 0 4 Pole CA627/ CA715/4 0 CA705/1 0 CA611/S/Q 0 Pole CA627/ - - CA715/ CA732/ 2 Pole CA711/ Pole CA711/ Pole CA711/4 - - Pole CA711/ Pole CA729/2 0 CA749/2 0 CA711/2 0 CA703/6 0 3 Pole CA729/3 CA749/3 CA711/3 CA704/6 0 4 Pole CA729/4 CA749/4 CA711/4 CA705/6 0 CA707/S/Q/3 0 Pole CA729/ CA749/ CA711/ CA737/ 0 2 Pole CA716/ Pole CA716/ Pole CA716/4 - - Pole CA716/ Pole CA623/ Pole CA623/ Pole CA623/ Pole CA623/ Pole CA624/ Pole CA624/ Pole CA624/ Pole CA624/ Internal shorting - system - not available. - 2 Pole CA625/ pole strip - is breakable - into any - number of - poles needed. - 3 Pole CA625/ Pole CA625/ Pole CA625/ Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

49 VARIOUS ACCESSORIES ACCESSORIES SCREW TERMINAL BLOCKS ENDPLATES Terminal Block Dimensions CTS2.5U-N, CTS4U-N CTT2.5UK/J/T/E EP2.5/4UN 32 x 39 x 1.5mm CCTS6U, CTSU EP6/U 31 x 42.5 x 1.5mm CMC1-2 EPCMC x 46.5 x 2.5mm CMC2-2, CMCG4 EPCMC x 65 x 2.5mm CDL4UN, CDLG4 EPCDL4UN 47.5 x 57 x 1.5mm CDLG2.5 EPCDLG x 71.4 x 1.2mm CTLG2.5 EPCTLG x 87.5 x 1.2mm ODL4U EPODL4U (Front) 49 x 86 x 5.5mm EP1ODL4U (Back) 24 x 68 x 3mm CHV Series, CTSUSC Series EPUSC 52 x 48.5 x 1.5mm CTL2.5U Series EPCTL2.5U 55.5 x 84 x 1.5mm CTL2.5U-H Series EPCTL2.5U-H 55.5 x 61 x 1.5mm CAFL4U Series EPCAFL4U 32 x 72 x 1.5mm CDS6U EPCDS6U 37.2 x 82 x 1.5mm CKT4U EPCKT4U 30.5 x 46.5 x 2.5mm EPCKT4U EPCKT4U/4 65 x 38.3 x 1.5mm CDTTU Series EPCDTTU 41 x 63 x 3mm CSDL4U EPCSFL4U 28 x 55.5 x 1.6mm DDDL4U, DDFL4U EPDDFL4U 49 x 87.6 x 3mm CDL4U(E) EPCDL4U 43 x 55 x 2.4mm CTC4U EPCTC4U 34.5 x 47 x 2.5mm CMT4 EPCMT4 23 x 27 x 1.5mm CMB4 EPCMB4 27 x 27 x 7mm ODL2.5 Series EPODL x 59 x 4.6mm EP1ODL x 59 x 2.5mm END STOPS PARTITION PLATES Terminal Block Dimensions CTS2.5U-N, CTS4U-N CTT2.5UK/J/T/E CTS6U, CTSU CTS25UN CTS35UN CMT4 SEPARATOR PLATES PP2.5/4UN 37 x 44 x 1.6mm PP6/U 37.5 x 56 x 1.5mm PP25UN 42.5 x 62 x 1mm PP35UN x 64.5 x 1mm PPCMT4 32 x 37 x 1.6mm Terminal Block Dimensions CTS2.5U-N, CTS4U-N CTT2.5UK/J/T/E CTS6U, CTSU, CTS16U CSL4UN, CDL4UN(I.S.) CBM4 CDLG2.5 SP2.5/4UN 17.5 x 17.4 x 1.4mm 0 SP6/U 15.4 x 16.2 x 1.5mm 0 SPCDL4U 15.4 x 16.2 x 1.6mm 0 SPCMB x 12 x 1.5mm 0 SPCDLG x.5 x 1 0 CA2 CA802 CA702 CA2 Dimensions CA x x 9.5mm Dimensions CA x 32 x 8mm Dimensions CA x 45 x 9mm Dimensions CA2 80 x 46 x 9mm PROTECTIVE COVER CTSPC COVER SUPPORT PLATE Length Length CTSPC/40 40mm 2 CTSPC/90 90mm 2 CTSPC/0 0mm 2 CTSPC/ mm 2 CTSPC/1 1mm 2 CTSPC/0 0mm 2 CTSPC/ mm 2 CTSPC/ mm 2 CSP1 Assembled Block installed with Protective Cover Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

50 OVERVIEW LUG TYPE TERMINALS LUG/ STUD TYPE CONNECTION TECHNOLOGY INTRODUCTION Accepts Ring/ Fork Lug Cable Lugs Withstands severe vibration Reliable Gas-tight connection For very large wire sizes (up to 3 kcmil) High Torque values Secure connection Hinged cover featuring captive nut system guarantees quick and easy ring lug wiring E2514 MATERIAL SPECIFICATIONS Housing Stud/ Bolt Nut Current Bar INSTALLATION GUIDELINES Current Carrying Metal Corrosion free material Bolt: zinc chromate passivated steel Nut/ Screw: zinc chromate passivated steel Current Bar: nickel plated copper alloy/ tin plated copper Terminal Block Housing Polyamide PA66 Housing Self-extinguishing High mechanical strength Specifications Upper Temperature Limit: 5 C Lower Temperature Limit: - C Flammability UL94: V2/ V0 Volume Resistivity: 12 Ω cm Surface Resistivity: Ω 1 2 Secure Connection 3 1 Remove screw/ nut by using wrench/ hex nut driver 2 Place cable with ring/ fork cable lug on stud 3 Tighten screw/ nut to specified torque by using wrench/hex nut driver RING LUG TERMINAL CONNECTION TYPES AND FEATURES Slotted Hex Nut Terminal Phillips Screw Terminal Disconnect & Test Terminals Large Center Marking Area Hex Nut Power Terminal Hex Nut Terminal Hinge Type Captive Nut Terminal Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

51 SELECTION GUIDE OVERVIEW STUD / RING LUG TERMINALS Ring Lug Barrier Phillips Screw Slotted Hex Nut FEATURES Phillips Screw (CBS Series) Slotted Hex Nut (CSB Series) 22-4 AWG Up to 85A CBS Series page 52 CSB Series page 53 Ring Lug Stud Hex Nut Slotted Hex Nut FEATURES Hex Nut (CSTSN Series) Slotted Hex Nut (CSTSB Series) 22-2 AWG Up to 125A Ring Lug Hinge FEATURES Captive Nut Built-In Hinge Feed-Through Terminals Disconnect Terminals 22-2 AWG Up to 115A CSTSN Series page 54 Feed-Through page 56 CSTSB Series page 55 Disconnect page 57 Captive Nut Ring Lug Power FEATURES Nut/Bolt Connection Threaded Current Bar AWG - 3 kcmil up to 3A Nut/Bolt Connection CBB Series page Threaded Current Bar High Current Power FEATURES Captive Bolt System 8-4/0 AWG Up to 230A Protective Cover Stackable PTB Series page 60 page 61 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

52 CBS SERIES STUD / RING LUG TERMINALS BARRIER RING LUG TERMINAL BLOCKS - PHILLIPS SCREW CBS3U CBS4U CBS5U HIGHLIGHTS FEATURES Various sizes Wire size up to 4 AWG Current rating up to 85 A Suitable for standard fork type / ring lug connectors Version with standard Phillips Screw (CBS Series) Version with slotted nut (CSB Series) Compact design 2, 3, fork type and ring lug jumpers APPLICATIONS Applications with vibration Machinery Transportation Vehicles Provides solution when ring / fork lug is needed Compact / Space saving Panels Dimensions & Weight Height w DIN Rail 35 x 7.5 mm A Ring Lug Terminal Phillips Screw Head 9 mm 38 mm 45.5 mm 65 A Ring Lug Terminal Phillips Screw Head 13 mm Length 49 mm 49 mm 38 mm 45.5 mm Weight per piece 7.4 g 12.4 g E2514 E2514 Wire Size (solid / stranded) 22-8 AWG AWG 1.5- mm 2 Voltage Rating 600 V 00V AC/DC 600 V 00V AC/DC Current Rating A 41 A 65 A 57 A Torque 4.5 lb-in 0.5 Nm lb-in 1.2 Nm Insulation Material Wire Stripping Length Screwdriver Phillips #2 Phillips #2 13 mm 49 mm 38 mm 45.5 mm 13.8 g E AWG Screw / Stud Size M3 M4 M5 Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W CBS3U CBS3U/R CBS3U/BU CBS3U/BL CBS3U/O CBS3U/G CBS3U/Y CBS3U/W CBS4U CBS4U/R CBS4U/BU CBS4U/BL CBS4U/O CBS4U/G CBS4U/Y CBS4U/W 85 A Ring Lug Terminal Phillips Screw Head 600 V 00V AC/DC 85 A 76 A 25 lb-in 2.0 Nm Phillips #2 CBS5U CBS5U/R CBS5U/BU CBS5U/BL CBS5U/O CBS5U/G CBS5U/Y CBS5U /W End Plate EPCBS3U EPCBS3U EPCBS3U DIN Rail End Stop CA CA CA802 Insulated Jumper Fork Type CA514/ CA514/15-3 CA514/15-4 CA514/2-2 0 CA514/2-3 CA514/2-4 CA514/2-2 0 CA514/2-3 CA514/2-4 Insulated Jumper Ring Lug 2 Terminal 3 Terminal 4 Terminal 0 mm 0 mm 300 mm CA514/ CA514/17-3 CA514/17-4 Internal Jumper CA728/2 0 CA728/3 0 CA728/4 0 pole CA728/ Protective Cover CSTSPC2 CSTSPC2-1 CSTSPC1-2 CSTSPC1-3 CSTSPC1-4 CA514/4-2 0 CA514/4-3 CA514/4-4 CA772/2 0 CA772/3 0 CA772/4 0 CA772/ CSTSPC2 CSTSPC2-1 CSTSPC1-2 CSTSPC1-3 CSTSPC1-4 Marking Tag MT9 1 Pk. (0 tags) MT9 1 Pk. (0 tags) CA514/4-2 0 CA514/4-3 CA514/4-4 CA772/2 0 CA772/3 0 CA772/4 0 CA772/ CSTSPC2 CSTSPC2-1 CSTSPC1-2 CSTSPC1-3 CSTSPC1-4 MT9 1 Pk. (0 tags) 52 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

53 BARRIER RING LUG TERMINAL BLOCKS - SLOTTED NUT CSB3/N3U CSB3/N3UL CSB4/N4U CSB SERIES STUD / RING LUG TERMINALS CSB5/N5U Dimensions & Weight Height w DIN Rail 35 x 7.5 mm 9 mm 38 mm 45.5 mm 9 mm Length 49 mm 49 mm 38 mm 45.5 mm Weight per piece.2 g 11.7 g Wire Size (solid / stranded) 22-8 AWG AWG Voltage Rating 600 V 00V AC/DC 600 V 00V AC/DC Current Rating A 41 A A 41 A Torque 4.5 lb-in 0.5 Nm 4.5 lb-in 0.5 Nm Insulation Material Wire Stripping Length Screwdriver Hex Nut Driver 7 mm Flat Head 1.0 x 5.5 mm A Ring Lug Terminal Slotted Hex Nut A Ring Lug Terminal Long Slotted Hex Nut 13 mm 49 mm 38 mm 45.5 mm 19.0 g 16-6 AWG 1.5- mm 2 Screw / Stud Size M3 M3 M4 Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W 65 A Ring Lug Terminal Slotted Hex Nut E2514 E2514 E2514 E2514 CSB3/N3U CSB3/N3U/R CSB3/N3U/BU CSB3/N3U/BL CSB3/N3U/O CSB3/N3U/G CSB3/N3U/Y CSB3/N3U/W CSB3/N3UL CSB3/N3UL/R CSB3/N3UL/BU CSB3/N3UL/BL CSB3/N3UL/O CSB3/N3UL/G CSB3/N3UL/Y CSB3/N3UL/W 600 V 00V AC/DC 65 A 57 A lb-in 1.2 Nm Flat Head 1.0 x 5.5 mm CSB4/N4U CSB4/N4U/R CSB4/N4U/BU CSB4/N4U/BL CSB4/N4U/O CSB4/N4U/G CSB4/N4U/Y CSB4/N4U/W 13 mm 49 mm 38 mm 45.5 mm 19.0 g 16-4 AWG V 00V AC/DC 85 A 76 A 25 lb-in 2.0 Nm 85 A Ring Lug Terminal Slotted Hex Nut M5 Flat Head 1.0 x 5.5 mm CSB5/N5U CSB5/N5U/R CSB5/N5U/BU CSB5/N5U/BL CSB5/N5U/O CSB5/N5U/G CSB5/N5U/Y CSB5/N5U /W End Plate EPCBS3U EPCBS3U EPCBS3U EPCBS3U DIN Rail End Stop CA CA CA CA802 Insulated Jumper Fork Type Insulated Jumper Ring Lug pole CA514/ CA514/15-3 CA514/15-4 CA514/ CA514/17-3 CA514/17-4 Internal Jumper CA728/2 0 CA728/3 0 CA728/4 0 CA728/ Protective Cover 2 Terminal 3 Terminal CSTSPC2 4 Terminal CSTSPC2-1 0 mm CSTSPC1-2 0 mm CSTSPC mm CSTSPC1-4 CA514/ CA514/15-3 CA514/15-4 CA514/ CA514/17-3 CA514/17-4 CA728/2 0 CA728/3 0 CA728/4 0 CA728/ CSTSPC2 CSTSPC2-1 CSTSPC1-2 CSTSPC1-3 CSTSPC1-4 Marking Tag MT9 1 Pk. (0 tags) MT9 1 Pk. (0 tags) CA514/2-2 0 CA514/2-3 CA514/2-4 CA514/4-2 0 CA514/4-3 CA514/4-4 CA772/2 0 CA772/3 0 CA772/4 0 CA772/ CSTSPC2 CSTSPC2-1 CSTSPC1-2 CSTSPC1-3 CSTSPC1-4 MT9 1 Pk. (0 tags) CA514/2-2 0 CA514/2-3 CA514/2-4 CA514/4-2 0 CA514/4-3 CA514/4-4 CA772/2 0 CA772/3 0 CA772/4 0 CA772/ CSTSPC2 CSTSPC2-1 CSTSPC1-2 CSTSPC1-3 CSTSPC1-4 MT9 1 Pk. (0 tags) Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

54 CSTSN SERIES STUD / RING LUG TERMINALS HIGHLIGHTS STUD TYPE RING LUG TERMINAL BLOCKS CSTSN4U CSTSN5U CSTSN6U FEATURES Various sizes Wire size up to 2 AWG Current rating up to 125 A Suitable for standard fork type / ring lug connectors Version with standard Hex Nut (CSTSN Series) Version with slotted barrel (CSTSB Series) Compact design 2, 3, fork type and ring lug jumpers APPLICATIONS Applications with vibration Machinery Transportation Vehicles Provides solution when ring / fork lug is needed Compact / Space saving Panels Dimensions & Weight Height w DIN Rail 35 x 7.5 mm 17 mm 40.7 mm 48.0 mm 17 mm Length mm mm 40.7 mm 48.0 mm Weight per piece 21.5 g 23.4 g Wire Size (solid / stranded) 22-6 AWG 1.5- mm AWG Voltage Rating 600 V 00V AC/DC 600 V 00V AC/DC Current Rating 65 A 57 A 80 A 76 A Torque 14 lb-in 1.2 Nm 25 lb-in 2.0 Nm Insulation Material 65 A Bolt Terminal M4 Hex Nut 80 A Bolt Terminal M5 Hex Nut Wire Stripping Length Screwdriver Hex Nut Driver 7 mm Hex Nut Driver 8 mm End Plate EPCSTSU EPCSTSU 17 mm mm 40.7 mm 48.0 mm 30.4 g 22-2 AWG mm V 00V AC/DC 125 A 125 A 25 lb-in 3.0 Nm 125 A Bolt Terminal M6 Hex Nut Screw / Stud Size M4 M5 M6 Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W CB SCHEME E2514 E2514 E2514 CSTSN4U 0 CSTSN4U/R 0 CSTSN4U/BU 0 CSTSN4U/BL 0 CSTSN4U/O 0 CSTSN4U/G 0 CSTSN4U/Y 0 CSTSN4U/W 0 CSTSN5U 0 CSTSN5U/R 0 CSTSN5U/BU 0 CSTSN5U/BL 0 CSTSN5U/O 0 CSTSN5U/G 0 CSTSN5U/Y 0 CSTSN5U/W 0 Hex Nut Driver 9 mm CSTSN6U 0 CSTSN6U/R 0 CSTSN6U/BU 0 CSTSN6U/BL 0 CSTSN6U/O 0 CSTSN6U/G 0 CSTSN6U/Y 0 CSTSN6U /W 0 EPCSTSU DIN Rail End Stop CA802 CA802 CA802 Insulated Jumper Fork Type CA514/1-2 0 CA514/1-3 CA514/1-4 CA514/1-2 0 CA514/1-3 CA514/1-4 CA514/7-2 0 CA514/7-3 CA514/7-4 Jumper Ring Lug 2 Terminal 3 Terminal 4 Terminal 0 mm 0 mm 300 mm CA514/3-2 0 CA514/3-3 CA514/3-4 Protective Cover CSTSPC2 CSTSPC2-1 CSTSPC1-2 CSTSPC1-3 CSTSPC1-4 CA514/3-2 0 CA514/3-3 CA514/3-4 CSTSPC2 CSTSPC2-1 CSTSPC1-2 CSTSPC1-3 CSTSPC1-4 Marking Tag MT2B4 1 Pk. (0 tags) MT2B4 1 Pk. (0 tags) CA514/8-2 0 CA514/8-3 CA514/8-4 CSTSPC2 CSTSPC2-1 CSTSPC1-2 CSTSPC1-3 CSTSPC1-4 MT2B4 1 Pk. (0 tags) 54 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

55 STUD TYPE RING LUG TERMINAL BLOCKS CSTSB4U CSTSB5U CSTSB SERIES STUD / RING LUG TERMINALS Dimensions & Weight Length Height w DIN Rail Weight per piece 35 x 7.5 mm 65 A Bolt Terminal Slotted Barrel 17 mm mm 40.7 mm 48.0 mm 24 g 65 A Bolt Terminal Slotted Barrel 17 mm mm 40.7 mm 48.0 mm 25.5 g Wire Size (solid / stranded) 22-6 AWG 1.5- mm 2 Voltage Rating 600 V 00V AC/DC Current Rating 65 A 57 A Torque 14 lb-in 1.2 Nm Insulation Material End Plate EPCSTSU DIN Rail AWG V 00V AC/DC 80 A 76 A 25 lb-in 2.0 Nm Wire Stripping Length Screw / Stud Size M4 M5 Screwdriver Flat Head 1.0 x 5.5 mm Flat Head 1.0 x 5.5 mm Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W CB SCHEME E2514 E2514 CSTSB4U 0 CSTSB4U/R 0 CSTSB4U/BU 0 CSTSB4U/BL 0 CSTSB4U/O 0 CSTSB4U/G 0 CSTSB4U/Y 0 CSTSB4U/W 0 CSTSB5U 0 CSTSB5U/R 0 CSTSB5U/BU 0 CSTSB5U/BL 0 CSTSB5U/O 0 CSTSB5U/G 0 CSTSB5U/Y 0 CSTSB5U/W 0 EPCSTSU End Stop CA802 CA802 Insulated Jumper Fork Type CA514/1-2 0 CA514/1-3 CA514/1-4 CA514/1-2 0 CA514/1-3 CA514/1-4 Insulated Jumper Ring Lug CA514/3-2 0 CA514/3-3 CA514/3-4 CA514/3-2 0 CA514/3-3 CA514/3-4 2 Terminal 3 Terminal 4 Terminal 0 mm 0 mm 300 mm Protective Cover CSTSPC2 CSTSPC2-1 CSTSPC1-2 CSTSPC1-3 CSTSPC1-4 Marking Tag MT2B4 1 Pk. (0 tags) CSTSPC2 CSTSPC2-1 CSTSPC1-2 CSTSPC1-3 CSTSPC1-4 MT2B4 1 Pk. (0 tags) Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

56 STH SERIES STUD / RING LUG TERMINALS HINGE TYPE RING LUG TERMINAL BLOCKS STH3 STH4 STH6 HIGHLIGHTS FEATURES Bolt Feed Through Terminals Suitable for standard fork type / ring lugs Captive nut system Only standard flat head screw driver needed to tighten connection IP touch proof terminals with hinged plastic cover 2, 3, fork type and ring lug jumpers APPLICATIONS Applications with vibration Machinery Transportation Vehicles Provides solution when ring / fork lug is needed Dimensions & Weight Height w DIN Rail 35 x 7.5 mm 9 mm 47.3 mm 54.8 mm 11 mm 52.2 mm 59.0 mm 18 mm Length 47 mm 4 64 mm 63.1 mm 70. Weight per piece 15.0 g 62.5 g 57.8 g CB SCHEME Wire Size (solid / stranded) 22-8 AWG AWG AWG mm 2 Voltage Rating 600 V 00V AC/DC 600 V 00V AC/DC 600 V 00V AC/DC Current Rating A 41 A A 41 A 115 A 125 A Torque 4.5 lb-in 0.5 Nm 14 lb-in 1.2 Nm 25 lb-in 3.0 Nm Insulation Material E2514 E2514 E2514 Wire Stripping Length Screw / Stud Size M3 M4 M6 Screwdriver Flat Head 0.8 x 4 mm Flat Head 0.8 x 4 mm Flat Head 1.0 x 5.5 mm Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W STH3 0 STH3/R 0 STH3/BU 0 STH3/BL 0 STH3/O 0 STH3/G 0 STH3/Y 0 STH3/W 0 STH4 STH4/R STH4/BU STH4/BL STH4/O STH4/G STH4/Y STH4/W STH6 STH6/R STH6/BU STH6/BL STH6/O STH6/G STH6/Y STH6/W End Plate EPSTH3 EPSTH4 EPSTH6 DIN Rail End Stop Jumpers Fork Type CA702 0 CA802 CA2 CA512/ CA512/15-3 CA512/ CA702 0 CA802 CA2 CA512/ CA512/13-3 CA512/ CA702 0 CA802 CA2 Insulated Jumpers Fork Type CA514/ CA514/15-3 CA514/15-4 CA514/ CA514/13-3 CA514/13-4 Jumpers Ring Lug CA512/ CA512/17-3 CA512/17-4 CA512/ CA512/14-3 CA512/14-4 Insulated Jumpers Ring Lug CA514/ CA514/17-3 CA514/17-4 CA514/ CA514/14-3 CA514/14-4 Internal Jumpers Marking Tag pole CA773/2 0 CA773/3 CA773/4 CA773/ MT8 1 Pk. (0 tags) MT 1 Pk. (0 tags) CA774/2 0 CA774/3 CA774/4 MT16 1 Pk. (0 tags) 56 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

57 HINGE TYPE DISCONNECT & TEST TERMINAL BLOCKS STH4DT STH4DTSH STH4DTFT STH SERIES STUD / RING LUG TERMINALS HIGHLIGHTS Dimensions & Weight Height w DIN Rail 35 x 7.5 mm 11 mm 52.2 mm 59.0 mm 22 mm Length mm 59.0 mm Weight per piece 42.8 g 42.3 g CB SCHEME Wire Size (solid / stranded) 22-8 AWG AWG Voltage Rating 600 V 00V AC/DC 300 V 00V AC/DC Current Rating 35 A 41 A 25 A 34 A Torque 14 lb-in 1.2 Nm 14 lb-in 1.2 Nm Insulation Material Disconnect Terminal Block Hinge Type Wire Stripping Length Screwdriver Flat Head 0.8 x 4 mm Double Disconnect Terminal Block E2514 E2514 E2514 Screw / Stud Size M4 M4 Flat Head 0.8 x 4 mm Feed-Through Terminal Block Disconnect Profile 11 mm mm 59.0 mm 36.6 g 22-8 AWG V 00V AC/DC A 41 A 14 lb-in 1.2 Nm M4 Flat Head 0.8 x 4 mm FEATURES Bolt Disconnect Terminals Disconnect (STH4DT) 2 Shorted Disconnect Terminals (STH4DTSH) Feed-Through with same profile (STH4DTFT) Suitable for standard fork type / ring lugs Captive nut system IP touch proof terminals with hinged plastic cover 2, 3, fork type and ring lug jumpers APPLICATIONS Disconnect / Test Applications Measuring / Control Circuit Utility Instruments and Transformer Applications Meter Replacement External Current Measurement Grey STH4DT STH4DTSH 24 STH4DTFT 0 End Plate EPSTH4DT EPSTH4DT EPSTH4DT DIN Rail End Stop Jumpers Fork Type Insulated Jumpers Fork Type Jumpers Ring Lug Insulated Jumpers Ring Lug Insulated Alternate Jumpers CA702 0 CA802 CA2 CA512/ CA512/13-3 CA512/13-4 CA514/ CA514/13-3 CA514/13-4 CA512/ CA512/14-3 CA512/14-4 CA514/ CA514/14-3 CA514/14-4 CA514/14-3A CA514/14-4A CA702 0 CA802 CA2 CA512/ CA512/13-3 CA512/13-4 CA514/ CA514/13-3 CA514/13-4 CA512/ CA512/14-3 CA512/14-4 CA514/ CA514/14-3 CA514/14-4 CA514/14-3A CA514/14-4A CA702 0 CA802 CA2 CA512/ CA512/13-3 CA512/13-4 CA514/ CA514/13-3 CA514/13-4 CA512/ CA512/14-3 CA512/14-4 CA514/ CA514/14-3 CA514/14-4 CA514/14-3A CA514/14-4A Shorting Plug QJ11/2 25 QJ11/2 25 Disconnect / Test Application for Metering CT STH4DT Disconnect Terminal LCSTH4DT Lockout Cap QJ11/2 Shorting Plug CA514/14-3 Lock Out Cap LCSTH4DT 25 LCSTH4DT 25 Marking Tag MT 1 Pk. (0 tags) MT 1 Pk. (0 tags) MT 1 Pk. (0 tags) Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

58 CBB SERIES STUD / RING LUG TERMINALS HIGHLIGHTS CBB35/ CBB35/LS RING LUG POWER TERMINAL BLOCKS CBB70 CBB70LS CBB95 CBB95LS FEATURES High Current up to 3A Feed-Through Terminals Nut / Bolt version Version with threaded current bar (LS) for fast wiring without 2 wrenches Wire crimped into ring / fork lug on to the flat current bar Special Mounting foot design for tight fit on rail Protective Cover in various length 2, jumper bars APPLICATIONS High Current Power Applications Large size wires Power Distribution Feeding Applications Provides solution when ring / fork lug is needed Dimensions & Weight Height w DIN Rail 35 x 7.5 mm 32 mm 47.5 mm 54.5 mm 38 mm Length 75 mm 92 mm 47.5 mm 54.5 mm Weight per piece 82.0 g g E2514 E2514 E2514 Wire Size (solid / stranded) -1/0 AWG 6-.0 mm 2 8-2/0 AWG mm 2 8-4/0 AWG mm 2 Voltage Rating 600 V 00V AC/DC 600 V 00V AC/DC Current Rating 1 A 1 A 175 A 192 A Torque 27 lb-in 3.0 Nm 54.5 lb-in 6.0 Nm Insulation Material Wire Stripping Length Screwdriver 1 A Feed Through Power Terminal Wrench M6 Flat Head 1 x 5.5 mm 175 A Feed Through Power Terminal Wrench M8 Flat Head 1 x 1.5 mm 230 A Feed Through Power Terminal 38 mm 92 mm 47.5 mm 54.5 mm Screw / Stud Size M6 M8 M Grey Nut & Bolt configuration Threaded Current Bar CBB35/ CBB35/LS CBB70 CBB70LS g 600 V 00V AC/DC 230 A 232 A 90 lb-in.0 Nm Wrench M Flat Head 1 x 1.5 mm CBB95 CBB95LS Partition Plate PPCBB PPCBB DIN Rail End Stop CA2 CA2 Protective Cover for installing on PPCBB & PPCBB1 Permanent Jumper Bars 70 mm 80 mm 0 mm 130 mm 160 mm 0 mm 2 mm CBBPC1/70 CBBPC1/80 CTSPC2-1 CBBPC1/130 CBBPC1/160 CBBPC1/0 CBBPC1/2 CA790/2 CA790/3 CA2 CA2 CBBPC1/70 CBBPC1/80 CTSPC2-1 CBBPC1/130 CBBPC1/160 CBBPC1/0 CBBPC1/2 CA791/2 CA791/3 Marking Tag MT12 1 Pk. (0 tags) MT16 1 Pk. (0 tags) MT16 PPCBB1 CA2 CA2 CBBPC2/0 CBBPC2/160 CBBPC2/0 CBBPC2/2 CA791/2 CA791/3 1 Pk. (0 tags) 58 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

59 RING LUG TYPE POWER TERMINAL BLOCKS CBB1 CBB1LS CBB1 CBB1LS CBB185 CBB185LS CBB SERIES STUD / RING LUG TERMINALS Dimensions & Weight Height w DIN Rail 35 x 7.5 mm 255 A Feed Through Power Terminal 48 mm 47.3 mm 54.5 mm 285 A Feed Through Power Terminal 48 mm Length 0 mm 1 mm 47.3 mm 54.5 mm Weight per piece g g 3 A Feed Through Power Terminal 48 mm 1 mm 47.3 mm 54.5 mm g E2514 E2514 E2514 Wire Size (solid / stranded) 8-2 KCMIL 16-1 mm KCMIL 16-1 mm KCMIL mm 2 Voltage Rating 600 V 00V AC/DC 600 V 00V AC/DC Current Rating 255 A 269 A 285 A 309 A Torque 90 lb-in.0 Nm 127 lb-in 14.0 Nm Insulation Material Wire Stripping Length Screw / Stud Size M M12 M12 Screwdriver Grey Nut & Bolt configuration Threaded Current Bar Wrench M Flat Head 1 x 1.5 mm CBB1 CBB1LS Wrench M12 Flat Head 1 x 1.5 mm CBB1 CBB1LS 600 V 00V AC/DC 3 A 353 A 127 lb-in 14.0 Nm Wrench M12 Flat Head 1 x 1.5 mm CBB185 CBB185LS Partition Plate PPCBB1 PPCBB1 PPCBB1 DIN Rail End Stop Protective Cover for installing on PPCBB & PPCBB1 0 mm 160 mm 0 mm 2 mm CA2 CA2 CBBPC2/0 CBBPC2/160 CBBPC2/0 CBBPC2/2 CA2 CA2 CBBPC2/0 CBBPC2/160 CBBPC2/0 CBBPC2/2 CA2 CA2 CBBPC2/0 CBBPC2/160 CBBPC2/0 CBBPC2/2 Permanent Jumper Bars CA793/2 CA793/3 CA794/2 CA794/3 Marking Tag MT16 1 Pk. (0 tags) MT16 1 Pk. (0 tags) CA794/2 CA794/3 MT16 1 Pk. (0 tags) Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

60 PTB SERIES STUD / RING LUG TERMINALS HIGHLIGHTS FEATURES Panel / DIN Rail mountable High Current up to 230A Finger safe protective cover (PSPTBXX) Modular / stackable design 2, 3, jumper system APPLICATIONS High Current Power Applications Large size wires Power Distribution Feeding Applications Provides solution when ring / fork lug is needed Dimensions & Weight Length Height w DIN Rail Weight per piece 35 x 7.5 mm HIGH CURRENT POWER TERMINAL BLOCKS PTB35/ PTB35/SH 25 mm 113 / 169 mm 61.0 / 66.5 mm 68.3 / / g Wire Size (solid / stranded) 8-2 AWG 1.5- mm 2 Voltage Rating 600 V 00V AC/DC Current Rating 115 A 1 A Torque 27 lb-in 3.0 Nm Insulation Material Wire Stripping Length Screw / Stud Size M6 Grey PTB35/ PTB35/SH Marking Tag CB SCHEME MT9 PTB35/ Screwdriver Hex Nut Driver mm PTB35/SH E2514 E Pk. (0 tags) PTB70/95 PTB70/95SH 32 mm 130 / 192 mm 76.6 / 78.0 mm 84.5 / 86.0 mm / g 8-4/0 AWG mm V 00V AC/DC 230 A 232 A 87 lb-in.0 Nm PTB70/95 PTB70/95SH Protective Cover PSPTB35 PSPTB70 DIN Rail CA701-15/S End Stop CA2 CA2 Jumper System CA703/9 CA704/9 CA705/9 Hex Nut Driver 13 mm CA2 CA2 M8 PTB70/95 PTB70/95SH CA703/11 CA704/11 CA705/11 MT9 1 Pk. (0 tags) Marking Tag Holder MHPTB35 MHPTB35 Marking Tag Holder MHPTB35 Protective Cover PSPTB35 60 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

61 JUMPERS / SHORTING LINKS ACCESSORIES STUD / RING LUG TERMINALS Fork Type Jumper Insulated Fork Type Jumper Ring Lug Jumper Insulated Ring Lug Jumper Internal Jumper Alternate Jumper for STH4DT Series Terminal Block Series Poles CBS3U CSB3/N3U CSB3/N3UL STH3 CBS4U CBS5U CSB4/N4UL CSB5/N5U CSTSN4U CSTSN5U CSTSN6U CSTSB4U CSTSB5U CSTSN6U STH4 STH4DT STH4DTFT STH6 2 Pole 3 Pole 4 Pole Pole 2 Pole 3 Pole 4 Pole Pole 2 Pole 3 Pole 4 Pole 2 Pole 3 Pole 4 Pole 2 Pole 3 Pole 4 Pole 2 Pole 3 Pole 4 Pole CA512/15-2 CA512/15-3 CA512/15-4 CA512/2-2 CA512/2-3 CA512/2-4 CA512/1-2 CA512/1-3 CA512/1-4 CA512/7-2 CA512/7-3 CA512/7-4 CA512/13-2 CA512/13-3 CA512/13-4 N/A CA514/15-2 CA514/15-3 CA514/15-4 CA514/2-2 CA514/2-3 CA514/2-4 CA514/1-2 CA514/1-3 CA514/1-4 CA514/7-2 CA514/7-3 CA514/7-4 CA514/13-2 CA514/13-3 CA514/13-4 N/A CA512/17-2 CA512/17-3 CA512/17-4 CA512/4-2 CA512/4-3 CA512/4-4 CA512/3-2 CA512/3-3 CA512/3-4 CA512/8-2 CA512/8-3 CA512/8-4 CA512/14-2 CA512/14-3 CA512/14-4 N/A CA514/17-2 CA514/17-3 CA514/17-4 CA514/4-2 CA514/4-3 CA514/4-4 CA514/3-2 CA514/3-3 CA514/3-4 CA514/8-2 CA514/8-3 CA514/8-4 CA514/14-2 CA514/14-3 CA514/14-4 N/A CA728/2 CA728/3 CA728/4 CA728/ CA772/2 CA772/3 CA772/4 CA772/ N/A N/A N/A CA774/2 CA774/3 CA774/4 0 0 N/A N/A N/A N/A CA514/14-3A CA514/14-4A END STOPS CA802 CA707 CA2 Cat. No CA802 Dimensions 32 x 45 x 8 mm Cat. No CA702 Dimensions 34 x 45 x 9 mm Cat. No CA2 Dimensions 44.5 x x 9.5 mm ENDPLATES / PROTECTIVE COVERS For CBS, CSB, CSTS Series Terminal Block CBS Series CSB Series CSTSN Series CSTSB Series STH3 STH4 STH6 STH4DT Cat. No EPCBS3U EPCSTSU EPSTH3 EPSTH4 EPSTH6 EPSTH4DT Dimensions 26.2 x 49 x 1.5 mm 31 x x 1.5 mm 34 x 47 x 1.5 mm 39.5 x 46 x 1.5 mm 51 x 63.5 x 1.5 mm 37.5 x 86 x 1.5 mm Length 0mm CSTSPC1-2 0mm CSTSPC mm CSTSPC1-4 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

62 OVERVIEW SPRING TERMINAL BLOCKS INTRODUCTION SPRING CLAMP TECHNOLOGY Easy Installation Versatile and Vibration Proof Reliable Gas-tight connection Fail proof, safe connection NO torque requirements Maintenance free Terminals accept wires with/ without ferrules E2514 MATERIAL SPECIFICATIONS Housing Spring Current Bar Current Carrying Metal Corrosion free material Spring: Stainless Steel Current Bar: copper tin plated Terminal Block Housing Polyamide PA66 Housing Self-extinguishing High mechanical strength Specifications Upper Temperature Limit: 5 C Lower Temperature Limit: - C Flammability UL94: V2/ V0 Volume Resistivity: 12 Ω cm Surface Resistivity: Ω INSTALLATION GUIDELINES 1 2 a b Secure Connection 3 1 Insert Flat-Head Screw Driver into insertion space to open pre-loaded spring WATCH 2 (a) Insert Wire into opening in spring leg. (b) Remove screwdriver. 3 The spring force presses conductor against the current bar for a reliable/safe connection VIDEO CX SERIES FEATURES AND ADVANTAGES COMPACT DESIGN CX4 - MOST COMPACT IN THE INDUSTRY Knife Disconnect Fuse Terminal Push-In Jumper Technology Large Center Marking Area Partition Plate for Separation Unique Design for easy wire entry Side Entry Terminals 62 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

63 SELECTION GUIDE OVERVIEW SPRING TERMINAL BLOCKS CX Series FEATURES Extremely Compact Design CX4 is the most compact in the industry Push-In technology jumper system 2, 3, 4 5, 6, 7, 8, pole 2 independent jumper channels Easy breakout of jumper pins for alternate shorting of terminal blocks Felt tip pen marking option Center marking tag area Unique design in plastic housing for easy wire entry Individually mountable partition plates provide electrical and visual separation Test Plugs for Test & Measurement needs Feed-Though page Double Level page 71 Multi-Connection page Electronic Component page 72 Ground/Earth page Fuse page 74 Component Carrier page 75 Disconnect page 76 Side Entry page 77 Pluggable page 78 Hybrid Distribution page 79 Angular Series FEATURES 45 wire entry for easy installation 2.5mm to 8mm terminal blocks (up to A) Multi-Connection Terminals 2, 3, 4 connection ground terminals Feed-Through page 80 Multi-Connection page 81 Multi-Level page Ground/Earth page Jumpers page 86 End Plates, Partitions, End Stops, Test Plugs page 87 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

64 CX SERIES FEED THROUGH TERMINAL BLOCKS SPRING TERMINAL BLOCKS CX4 CX2.5 CX6 HIGHLIGHTS FEATURES Most compact in Industry 2, 3, 4, Pole Push-In Jumpers 2 Jumper Channels for multiple Jumper options 3 and 4 Connection Terminals 3 Marking Locations Many Colors APPLICATIONS High Vibration Environments Machines Elevator Cabinets Transport 2 Connection Feed-Through 2 Jumper Channels 2 Connection Feed-Through 2 Jumper Channels 2 Connection Feed-Through 2 Jumper Channels 5 mm 8 mm Length 49.7 mm 54.8 mm 62.1 mm Height w DIN Rail 35 x 7.5 mm 38.0 mm 45.5 mm 38.0 mm 45.5 mm 43.0 mm.5 mm 6.2 g 9.8 g 14.0 g Dimensions Weight per piece E2514 Wire Size (solid / stranded) E2514 E AWG mm 24- AWG mm 24-8 AWG Voltage Rating 600 V 00V AC/DC 600 V 00V AC/DC 600 V 00V AC/DC Current Rating A 24 A 30 A 32 A A 41 A Insulation Material 2 2 Wire Stripping Length Screwdriver mm 14 mm Flat Head 0.6 x 3.5 mm Flat Head 0.8 x 4 mm Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W CX2.5 CX2.5/R CX2.5/BU CX2.5/BL CX2.5/O CX2.5/G CX2.5/Y CX2.5/W CX4 CX4/R CX4/BU CX4/BL CX4/O CX4/G CX4/Y CX4/W CX6 CX6/R CX6/BU CX6/BL CX6/O CX6/G CX6/Y CX6/W End Plate EPCX2.5 EPCX4 EPCX6 Partition Plate PPCX4 PPCX4 PPCX DIN Rail CA701-15/S CA701-15/S CA701-15/S End Stop CA702 CA802 CA3 CA702 CA802 CA3 CA702 CA802 CA3 JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/ 0 JX4/2 JX4/3 JX4/4 JX4/8 JX4/ JX4/16 0 JX6/2 JX6/3 JX6/4 JX6/ 0 Test Plug TX2.5 TX4 TX6 Marking Tag Warning Label MT5 WLX2.5 Shorting Link/ Jumpers 64 mm Flat Head 0.5 x 3 mm 5 pole 6 pole 7 pole 8 pole pole 16 pole 1 Pk. (0 tags) 1 Pk. (0 tags) MT6 WLX4 1 Pk. (0 tags) 1 Pk. (0 tags) MT8 WLX6 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908) Pk. (0 tags) 1 Pk. (0 tags)

65 FEED-THROUGH/MULTI-CONNECTION TERMINAL BLOCKS CX CX SERIES SPRING TERMINAL BLOCKS CSC16T CX2.5/3 2 Connection Feed-Through 2 Jump Channels 2 Connection Feed-Through 2 Jump Channels 3 Connection Feed-Through 2 Jump Channels 4 Connection Feed-Through 2 Jumper Channels mm 12 mm 5 mm 5 mm Length 71.7 mm 82.0 mm 62.2 mm 74.7 mm Height w DIN Rail 35 x 7.5 mm 49.5 mm 57.0 mm mm 38.0 mm 45.5 mm 38.0 mm 45.5 mm 22.4 g 39 g 7.6 g 9.4 g Dimensions Weight per piece CX2.5/4 E2514 E2514 E2514 E AWG 0.2- mm AWG AWG mm AWG mm2 Voltage Rating 600 V 00V AC/DC 600 V 800V AC/DC 600 V 00 V AC/DC 600 V 00V AC/DC Current Rating 65 A 57 A 85 A 76 A A 24 A A 24 A Wire Size (solid stranded) 18 mm mm mm mm Flat Head 0.8 x 4 mm Flat Head 1.0 x 5.5 mm Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Insulation Material Wire Stripping Length Screwdriver Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W CX CX/R CX/BU CX/BL CX/O CX/G CX/Y CX/W CSC16T CSC16T/R CSC16T/BU CSC16T/BL CSC16T/O CSC16T/G CSC16T/Y CSC16T/W CX2.5/3 CX2.5/3/R CX2.5/3/BU CX2.53/BL CX2.5/3/O CX2.5/3/G CX2.5/3/Y CX2.53/W CX2.5/4 CX2.5/4/R CX2.5/4/BU CX2.5/4/BL CX2.5/4/O CX2.5/4/G CX2.5/4/Y CX2.5/4/W EPCX EPCSC16T EPCX2.5/3 EPCX2.5/4 Partition Plate PPCX PPCX4/3 PPCX4/4 DIN Rail CA701-15/S CA701-15/S CA701-15/S CA701-15/S End Stop CA702 CA802 CA3 CA702 CA802 CA3 CA702 CA802 CA3 CA702 CA802 CA3 JX/2 CA801/5 0 JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/ 0 JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/ 0 Test Plug TX TX2.5 TX2.5 Marking Tag Warning Label MT WLX 1 Pk. (0 tags) 0 MT5 WLX2.5 1 Pk. (0 tags) 0 5 pole 6 pole 7 pole 8 pole pole 16 pole End Plate Shorting Link/ Jumpers MT5 WLX2.5 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908) Pk. (0 tags) 0 65

66 CX SERIES MULTIPLE CONNECTION TERMINAL BLOCKS SPRING TERMINAL BLOCKS CX6/3 CX4/4 CX4/3 CX/3 3 Connection Feed-Through 2 Jumper Channels 4 Connection Feed-Through 2 Jumper Channels 3 Connection Feed-Through 2 Jumper Channels 4 Connection Feed-Through 2 Jumper Channels 8 mm mm Length 70.5 mm 86.2 mm 82.2 mm 97.0 mm Height w DIN Rail 35 x 7.5 mm 38.0 mm 45.5 mm 38.0 mm 45.5 mm 43.0 mm.5 mm 49.5 mm 57.0 mm.8 g 13.6 g 19.8 g 35.0 g Dimensions Weight per piece UL E2514 Wire Size (solid stranded) E2514 E2514 IEC 24- AWG mm2 24- AWG mm AWG AWG 0.2- mm2 Voltage Rating 600 V 00V AC/DC 600 V 00V AC/DC 600 V 00V AC/DC 600 V 00V AC/DC Current Rating 30 A 32 A 30 A 32 A A 41 A 65 A 57 A Insulation Material Wire Stripping Length Screwdriver mm 14 mm 18 mm Flat Head 0.6 x 3.5 mm Flat Head 0.8 x 4 mm Flat Head 0.8 x 4 mm Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W CX4/3 CX4/3/R CX4/3/BU CX4/3/BL CX4/3/O CX4/3/G CX4/3/Y CX4/3/W CX4/4 CX4/4/R CX4/4/BU CX4/4BL CX4/4/O CX4/4/G CX4/4/Y CX4/4/W CX6/3 CX6/3/R CX6/3/BU CX6/3/BL CX6/3/O CX6/3/G CX6/3/Y CX6/3/W CX/3 CX/3/R CX/3/BU CX/3BL CX/3/O CX/3/G CX/3/Y CX/3/W End Plate EPCX4/3 EPCX4/4 EPCX6/3 Partition Plate PPCX4/3 PPCX4/4 DIN Rail CA701-15/S CA701-15/S CA701-15/S CA701-15/S End Stop CA702 CA802 CA3 CA702 CA802 CA3 CA702 CA802 CA3 CA702 CA802 CA3 JX4/2 JX4/3 JX4/4 JX4/8 JX4/ JX4/16 0 JX4/2 JX4/3 JX4/4 JX4/8 JX4/ JX4/16 0 JX6/2 JX6/3 JX6/4 JX6/ 0 JX/2 Test Plug TX4 TX4 TX6 TX Marking Tag Warning Label MT6 WLX4 Shorting Link/ Jumpers 66 mm Flat Head 0.6 x 3.5 mm 5 pole 6 pole 7 pole 8 pole pole 16 pole 1 Pk. (0 tags) 1 Pk. (0 tags) MT6 WLX4 1 Pk. (0 tags) 1 Pk. (0 tags) MT8 WLX6 1 Pk. (0 tags) 1 Pk. (0 tags) EPCX/3 MT WLX Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908) Pk. (0 tags) 1 Pk. (0 tags)

67 MULTIPLE CONNECTION TERMINAL BLOCKS CX2.5/4P CX2.5/4(E)D1 CX SERIES SPRING TERMINAL BLOCKS Dimensions Double potential Terminal Block. 2 different voltage potentials. 2 Jumper Channels on one side 5 mm 4 connection spring Terminal Block. With built in Diode (1N4007) for reverse polarity protection to allow current only to flow in one direction 5 mm Length 74.7 mm 74.7 mm Height w DIN Rail 35 x 7.5 mm 38.0 mm 45.5 mm 38.0 mm 45.5 mm Weight per piece 9.6 g 9.4 g E2514 E2514 Wire Size (solid stranded) AWG mm AWG mm 2 Voltage Rating 600 V 00V AC/DC 600 V 00V AC/DC Current Rating Insulation Material Wire Stripping Length mm mm Screwdriver Flat Head 0.5 x 3 mm Flat Head 0.6 x 3 mm Grey (standard) CX2.5/4P CX2.5/4(E)D1 End Plate EPCX2.5/4 EPCX2.5/4 Partition Plate PPCX4/4 PPCX4/4 DIN Rail End Stop CA702 CA802 CA3 CA702 CA802 CA3 Shorting Link/ Jumpers 5 pole 6 pole 7 pole 8 pole pole 16 pole JX2.5/2 0 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/ JX2.5/2 0 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/ Test Plug TX2.5 TX2.5 Marking Tag Warning Label MT5 0 WLX2.5 0 MT5 0 WLX2.5 0 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

68 CX SERIES GROUND / EARTH TERMINAL BLOCKS SPRING TERMINAL BLOCKS CXG4 CXG2.5 CXG6 HIGHLIGHTS FEATURES 2, 3, 4 Connection Ground Terminals Yellow / Green Color as per Industry Standard Snap-On feet 3 Marking Locations 2 Connection Ground Terminal 2 Jumper Channels 2 Connection Ground Terminal 2 Jumper Channels 2 Connection Ground Terminal 2 Jumper Channels 5 mm 8 mm Length 49.7 mm 54.8 mm 62.1 mm Height w DIN Rail 35 x 7.5 mm 38.0 mm 45.5 mm 38.0 mm 45.5 mm 43.0 mm.5 mm 8.4 g 11.0 g.2 g Dimensions APPLICATIONS Grounding Applications Weight per piece E2514 Wire Size (solid stranded) E2514 E AWG mm2 24- AWG mm AWG Voltage Rating 600 V 00V AC/DC 600 V 00V AC/DC 600 V 00V AC/DC Current Rating Insulation Material mm mm 14 mm Flat Head 0.5 x 3 mm Flat Head 0.6 x 3.5 mm Flat Head 0.8 x 4 mm Wire Stripping Length Screwdriver Yellow / Green CXG2.5 0 CXG4 0 CXG6 0 End Plate EPCX2.5 EPCX4 EPCX6 Partition Plate PPCX4 PPCX4 PPCX DIN Rail CA701-15/S CA701-15/S CA701-15/S End Stop CA702 CA802 CA3 CA702 CA802 CA3 CA702 CA802 CA3 JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/ 0 JX4/2 JX4/3 JX4/4 JX4/8 JX4/ JX4/16 0 JX6/2 JX6/3 JX6/4 JX6/ 0 Test Plug TX2.5 TX4 TX6 Marking Tag Warning Label MT5 WLX2.5 0 MT6 WLX4 0 0 MT8 WLX6 0 0 Shorting Link/ Jumpers 68 5 pole 6 pole 7 pole 8 pole pole 16 pole Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

69 MULTIPLE CONNECTION GROUND / EARTH TERMINAL BLOCKS CX SERIES SPRING TERMINAL BLOCKS CXG2.5/4 CXG4/3 CXG CXG2.5/3 2 Connection Ground Terminal 2 Jumper Channels 3 Connection Ground Terminal 2 Jumper Channels 4 Connection Ground Terminal 2 Jumper Channels 3 Connection Ground Terminal 2 Jumper Channels mm 5 mm 5 mm Length 62.1 mm 62.2 mm 74.7 mm 70.5 mm Height w DIN Rail 35 x 7.5 mm 43.0 mm.5 mm 38.0 mm 45.5 mm 38.0 mm 45.5 mm 38.0 mm 45.5 mm 29.4 g.2 g 12.4 g 14.0 g Dimensions Weight per piece E2514 Wire Size (solid stranded) E2514 E2514 E AWG 0.2- mm AWG mm AWG mm2 24- AWG mm2 Voltage Rating 600 V 00V AC/DC 600 V 00V AC/DC 600 V 00V AC/DC 600 V 00V AC/DC Current Rating Insulation Material 18 mm mm mm mm Flat Head 0.8 x 4 mm Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Flat Head 0.6 x 3.5 mm Wire Stripping Length Screwdriver Yellow / Green CXG End Plate EPCX EPCX2.5/3 Partition Plate PPCX PPCX4/3 DIN Rail CA701-15/S End Stop CA702 CA802 CA3 CXG4/3 EPCX2.5/4 EPCX4/3 PPCX4/4 PPCX4/ CA701-15/S CA701-15/S CA701-15/S CA702 CA802 CA3 CA702 CA802 CA3 CA702 CA802 CA3 JX/2 JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/ 0 JX4/2 JX4/3 JX4/4 JX4/8 JX4/ JX4/16 0 JX6/2 JX6/3 JX6/4 JX6/ 0 Test Plug TX TX2.5 TX2.5 TX4 Marking Tag Warning Label MT WLX 0 0 MT5 WLX MT5 WLX MT6 WLX4 0 0 Shorting Link/ Jumpers 5 pole 6 pole 7 pole 8 pole pole 16 pole CXG2.5/3 0 CXG2.5/4 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

70 CX SERIES MULTIPLE CONNECTION GROUND / EARTH TERMINAL BLOCKS SPRING TERMINAL BLOCKS CXG6/3 CXG4/4 CXG/3 4 Connection Ground Terminal 2 Jumper Channels 3 Connection Ground Terminal 2 Jumper Channels 3 Connection Ground Terminal 2 Jumper Channels 8 mm mm Length 86.2 mm 82.2 mm 82.2 mm Height w DIN Rail 35 x 7.5 mm 38.0 mm 45.5 mm 43.0 mm.5 mm 43.0 mm.5 mm 17.2 g 26.0 g 35.0 g Dimensions Weight per piece UL E2514 Wire Size (solid stranded) E AWG mm AWG AWG 0.2- mm2 Voltage Rating 600 V 00V AC/DC 600 V 00V AC/DC 600 V 00V AC/DC Current Rating Insulation Material mm mm 18 mm Flat Head 0.6 x 3.5 mm Flat Head 0.8 x 4 mm Flat Head 0.8 x 4 mm Wire Stripping Length Screwdriver Yellow / Green CXG4/4 CXG6/3 CXG/3 EPCX4/4 EPCX6/3 Partition Plate PPCX4/4 DIN Rail CA701-15/S CA701-15/S CA701-15/S End Stop CA702 CA802 CA3 CA702 CA802 CA3 CA702 CA802 CA3 JX4/2 JX4/3 JX4/4 JX4/8 JX4/ JX4/16 0 JX6/2 JX6/3 JX6/4 JX6/ 0 JX/2 Test Plug TX4 TX6 TX Marking Tag Warning Label MT6 WLX4 0 0 MT8 WLX6 0 0 MT WLX pole 6 pole 7 pole 8 pole pole 16 pole End Plate Shorting Link/ Jumpers 70 EPCX/3 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

71 CX SERIES DOUBLE LEVEL TERMINAL BLOCKS CXDL2.5 SPRING TERMINAL BLOCKS CXDL2.5(I.S) CXDLG2.5 CXDLG2.5(I.S) Double Level Terminal Jumpers / Marking on both levels Double Level Terminal Internally Shorted Top Level Feed-Through Bottom Level Grounding Circuit 4 Connection Ground Terminal 5 mm 5 mm 5 mm 5 mm Length 71 mm 71 mm 71 mm 71 mm 49.5 mm 57 mm 49.5 mm 57 mm 49.5 mm 57 mm 49.5 mm 57 mm.4 g 11.0 g 13.2 g 13.8 g Dimensions Height w DIN Rail 35 x 7.5 mm Weight per piece E2514 Wire Size (solid stranded) E AWG mm AWG mm2 Voltage Rating 600 V 00V AC/DC 600 V Current Rating A 24 A A Insulation Material E2514 E AWG mm AWG mm2 00V AC/DC 600 V 00V AC/DC 600 V 00V AC/DC 24 A A (Top Level) 24 A (Top Level) - - mm mm mm mm Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Wire Stripping Length Screwdriver Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W CXDL2.5 CXDL2.5/R CXDL2.5/BU CXDL2.5BL CXDL2.5/O CXDL2.5/G CXDL2.5/Y CXDL2.5/W End Plate EPCXDL2.5 Partition Plate CXDL2.5(I.S) CXDL2.5(I.S)/R CXDL2.5(I.S)/BU CXDL2.5(I.S)/BL CXDL2.5(I.S)/O CXDL2.5(I.S)/G CXDL2.5(I.S)/Y CXDL2.5(I.S)/W EPCXDL2.5 CXDLG2.5 Yellow / Green EPCXDL2.5 CXDLG2.5(I.S) Yellow / Green EPCXDL2.5 DIN Rail CA701-15/S CA701-15/S CA701-15/S CA701-15/S End Stop CA702 CA802 CA3 CA702 CA802 CA3 CA702 CA802 CA3 CA702 CA802 CA3 JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/ 0 JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/ 0 JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/ 0 JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/ 0 Test Plug TX2.5 TX2.5 TX2.5 TX2.5 Marking Tag Warning Label MT5 WLX MT5 WLX MT5 WLX MT5 WLX Shorting Link/ Jumpers 5 pole 6 pole 7 pole 8 pole pole 16 pole Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

72 CX SERIES SPRING TERMINAL BLOCKS TERMINAL BLOCKS WITH ELECTRONIC COMPONENTS CXDL2.5(E)D1 CXDL2.5(E)D2 CXDL2.5(E)D3 HIGHLIGHTS FEATURES Various configurations of Electronic Components soldered into CXDL2.5 double level Terminal Block Various Diode/ Resistor combinations Various Indicator options 4 Connection points for convenient wiring Arc Suppression Circuit Diode Arc Suppression Circuit Diode Reverse Polarity Protection Diode 5 mm 5 mm 5 mm Length 72.7 mm 72.7 mm 72.7 mm Height w DIN Rail 35 x 7.5 mm 49.5 mm 57.0 mm 49.5 mm 57.0 mm 49.5 mm 57.0 mm.6 g.6 g.6 g Dimensions APPLICATIONS Reverse polarity protection Lamp Testing AC/ DC voltage Indication Weight per piece E2514 Wire Size (solid stranded) E AWG mm AWG mm2 Voltage Rating 600 V 00V AC/DC 600 V Current Rating Insulation Material E AWG mm2 00V AC/DC 600 V 00V AC/DC - A (Top Level) 24 A (Top Level) Electronic Component Specifications Diode Type Diode Reverse Voltage / Current 1N N N V / 1 A 00 V / 1 A 00 V / 1 A Indicator Voltage Wire Stripping Length Screwdriver mm mm Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Grey (standard) CXDL2.5(E)D1 CXDL2.5(E)D2 CXDL2.5(E)D3 End Plate EPCXDL2.5 EPCXDL2.5 EPCXDL2.5 DIN Rail CA701-15/S CA701-15/S CA701-15/S End Stop CA702 CA802 CA3 CA702 CA802 CA3 CA702 CA802 CA3 JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/ 0 JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/ 0 JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/ 0 MT5 0 MT5 0 MT5 0 Shorting Link/ Jumpers Marking Tag 72 mm Flat Head 0.5 x 3 mm 5 pole 6 pole 7 pole 8 pole pole 16 pole Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

73 CX SERIES TERMINAL BLOCKS WITH ELECTRONIC COMPONENTS SPRING TERMINAL BLOCKS CXDL2.5(E)DD1/DD2 CXDL2.5(E)DD3/DD4 CXDL2.5(E)LD1 DD1 CXDL2.5(E)TS1 DD3 Diode Circuit for lamp testing DD2 Diode Circuit for lamp testing DD4 Voltage Indicator PT0 Temperature Sensor 5 mm 5 mm 5 mm 5 mm Length 72.7 mm 72.7 mm 72.7 mm 72.7 mm Height w DIN Rail 35 x 7.5 mm 49.5 mm 57.0 mm 49.5 mm 57.0 mm 49.5 mm 57.0 mm 49.5 mm 57.0 mm.6 g.6 g.6 g 12.2 g Dimensions Weight per piece UL E2514 Wire Size (solid stranded) E2514 E AWG mm AWG mm AWG mm AWG mm2 Voltage Rating 600 V 00V AC/DC 600 V 00V AC/DC 600 V 00V AC/DC 600 V 00V AC/DC Current Rating Insulation Material 1N N N N V / 1 A 00 V / 1 A 00 V / 1 A 00 V / 1 A V / 1-240V - mm mm mm mm Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Electronic Component Specifications Diode Type Diode Reverse Voltage / Current Indicator Voltage Wire Stripping Length Screwdriver Grey (standard) CXDL2.5(E)DD1 CXDL2.5(E)DD2 CXDL2.5(E)DD3 CXDL2.5(E)DD4 CXDL2.5(E)LD1/6-60V CXDL2.5(E)LD1/1-240V CXDL2.5(E)TS1 End Plate EPCXDL2.5 EPCXDL2.5 EPCXDL2.5 EPCXDL2.5 DIN Rail CA701-15/S CA701-15/S CA701-15/S CA701-15/S End Stop CA702 CA802 CA3 CA702 CA802 CA3 CA702 CA802 CA3 CA702 CA802 CA3 JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/ 0 JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/ 0 JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/ 0 JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/ 0 MT5 0 MT5 0 MT5 0 MT5 0 Shorting Link/ Jumpers Marking Tag 5 pole 6 pole 7 pole 8 pole pole 16 pole Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

74 CX SERIES FUSE TERMINAL BLOCKS 5 x mm SPRING TERMINAL BLOCKS CXF4 CXF4(L)6-60V CXF4(L)1-240V HIGHLIGHTS FEATURES CXF4 Series accepts 5xmm / 5x25mm fuse types Completely enclosed, no endplates Version with LED for blown fuse indication AC and DC compatible Large marking area No polarity required APPLICATIONS Control systems with fuse protection 2KΩ 27KΩ Dimensions Length 65.4 mm 65.4 mm 65.4 mm Height w DIN Rail 35 x 7.5 mm 61.3 mm 68.8 mm 61.3 mm 68.8 mm 61.3 mm 68.8 mm 16 g 16 g 16 g Weight per piece E2514 CB SCHEME Wire Size (solid stranded) E2514 E AWG mm2 24- AWG mm2 24- AWG mm2 Voltage Rating 600 V 00V AC/DC 600 V 00V AC/DC 600 V 00V AC/DC Current Rating A A A A A A Insulation Material Fuse Specifications Fuse Type 5x mm 5x mm 5x mm 6-60V AC/DC 1-240V AC/DC mm mm mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm LED Indicator Voltage Screwdriver Grey (standard) Blue BU Black BL CXF4 CXF4/BU CXF4/BL CXF4(L)6-60V CXF4(L)6-60V/BU CXF4(L)6-60V/BL CXF(L)1-240V CXF4(L)1-240V/BU CXF4(L)1-240V/BL CA701-15/S CA701-15/S CA701-15/S JX4/2 JX4/3 JX4/4 JX4/8 JX4/ JX4/16 0 JX4/2 JX4/3 JX4/4 JX4/8 JX4/ JX4/16 0 JX4/2 JX4/3 JX4/4 JX4/8 JX4/ JX4/16 0 Test Plug TX4 TX4 TX4 Marking Tag Warning Label MT6 WLX4 0 0 MT6 WLX4 0 0 MT6 WLX4 0 0 DIN Rail Shorting Link/ Jumpers Fuses 5 x mm 74 Current Rating 0.1A 0.2A 0.5A 1.0A 2.0A 8 pole pole 16 pole Slow Blow Cat. No 0.1M5xT 0.2M5xT 0.5M5xT 1.0M5xT 2.0M5xT Fast Blow Cat. No 0.1M5xF 0.2M5xF 0.5M5xF 1.0M5xF 2.0M5xF Current Rating Slow Blow Cat. No Fast Blow Cat. No 4.0A 5.0A 6.3A 8.0A.0A 4.0M5xT 5.0M5xT 6.3M5xT 8.0M5xT.0M5xT 4.0M5xF 5.0M5xF 6.3M5xF 8.0M5xF.0M5xF Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908) Ø5mm (0.2 in.) mm (0.79 in.) Wire Stripping Length

75 CX SERIES COMPONENT CARRIER TERMINAL BLOCKS CXCC4 SPRING TERMINAL BLOCKS CPD1 CPF CPF(L) 27KΩ Dimensions Length 65.4 mm 28 mm 28 mm 28 mm Height w DIN Rail 35 x 7.5 mm 61.3 mm 68.8 mm 3.8 g 3.8 g 4.2 g Weight per piece.2 g E2514 CB SCHEME Wire Size (solid stranded) E2514 E2514 E AWG mm2 24- AWG mm2 24- AWG mm2 24- AWG mm2 Voltage Rating 600 V 00V AC/DC 600 V 00V AC/DC 600 V 00V AC/DC 600 V 00V AC/DC Current Rating * * 1A 1A A A A A Insulation Material Component carrier base Plug module with diode Diode Type IN V AC/DC 1-240V AC/DC mm Flat Head 0.6 x 3.5 mm Carrier Specifications Component Type LED Indicator Voltage Plug module for 5x mm fuse Plug module for 5x mm fuse with LED indicator Wire Stripping Length Screwdriver Grey (standard) CXCC4 CPD1 CPF CPF(L)6-60V CPF(L)1-240V DIN Rail CA701-15/S End Stop CA702 CA802 CA3 JX4/2 JX4/3 JX4/4 JX4/8 JX4/ JX4/16 0 Test Plug TX4 Marking Tag Warning Label MT6 SWL4 0 MT6 Shorting Link/ Jumpers 8 pole pole 16 pole 0 MT6 0 MT6 0 * Current rating is based on plug used. Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

76 CX SERIES DISCONNECT & TEST TERMINAL BLOCKS SPRING TERMINAL BLOCKS CXK2.5 CXK2.5/4 CXK4 2 Connection Disconnect 2 Jumper Channels 4 Connection Disconnect 2 Jumper Channels 2 Connection Disconnect 2 Jumper Channels 5 mm 5 mm Length 62.2 mm 74.7 mm 70.5 mm Height w DIN Rail 35 x 7.5 mm 38 mm 45.5 mm 38 mm 45.5 mm 38 mm 45.5 mm 8.65 g 11.9 g 11.2 g Dimensions Weight per piece E2514 CB SCHEME Wire Size (solid stranded) E2514 E AWG mm AWG mm AWG mm2 Voltage Rating 600 V 00V AC/DC 600 V 00V AC/DC 600 V 00V AC/DC Current Rating 16A A 16A A 22A 22A Insulation Material 2 2 Wire Stripping Length Screwdriver mm mm Flat Head 0.5 x 3 mm Flat Head 0.6 x 3.5 mm Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W CXK2.5 CXK2.5/R CXK2.5/BU CXK2.5/BL CXK2.5/O CXK2.5/G CXK2.5/Y CXK2.5/W CXK2.5/4 CXK2.5/4/R CXK2.5/4/BU CXK2.5/4/BL CXK2.5/4/O CXK2.5/4/G CXK2.5/4/Y CXK2.5/4/W CXK4 CXK4/R CXK4/BU CXK4/BL CXK4/O CXK4/G CXK4/Y CXK4/W End Plate EPCX2.5/3 EPCX2.5/4 Partition Plate PPCX4/3 PPCX4/4 PPCX4/3 DIN Rail CA701-15/S CA701-15/S CA701-15/S End Stop CA702 CA802 CA3 CA702 CA802 CA3 CA702 CA802 CA3 JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/ 0 JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/ 0 JX4/2 JX4/3 JX4/4 JX4/8 JX4/ JX4/16 0 Test Plug TX2.5 TX2.5 TX4 Marking Tag Warning Label MT5 WLX MT5 WLX MT6 WLX4 0 0 Shorting Link/ Jumpers 76 mm Flat Head 0.5 x 3 mm 5 pole 6 pole 7 pole 8 pole pole 16 pole Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

77 CX SERIES SIDE ENTRY FEED THROUGH TERMINAL BLOCKS CXS2.5 SPRING TERMINAL BLOCKS CXSG2.5, CXSG4 CXS4 HIGHLIGHTS FEATURES Side Entry Spring Terminals 5 mm Side Entry Feed Through Side Entry Feed Through 5 / Side Entry Ground Terminal 5 mm 5 / Length 43 mm 43 mm 43 mm 43.5 mm 51 mm 43.5 mm 51 mm 43.5 mm 51 mm 5.4 g g 8.4 g Dimensions Height w DIN Rail 35 x 7.5 mm Weight per piece UL Wire Size E2514 CB SCHEME CXS2.5 CXS4 regular CX Series 5mm and 6mm Feed Through Terminal 2 Connection Ground Blocks Low Height requirements APPLICATIONS Flat Cabinets Same wire entry as E AWG mm2-24- AWG mm AWG 24- AWG mm mm2 Voltage Rating 600 V 00V AC/DC 600 V 00V AC/DC 600 V 00V AC/DC Current Rating A 24A 30A 32A Insulation Material Compact Design Same Jumpers as 9 mm mm mm Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm regular screw terminals Wire Stripping Length Screwdriver Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W CXS2.5 CXS2.5/R CXS2.5/BU CXS2.5/BL CXS2.5/O CXS2.5/G CXS2.5/Y CXS2.5/W CXS4 CXS4/R CXS4/BU CXS4/BL CXS4/O CXS4/G CXS4/Y CXS4/W CXSG2.5 CXSG4 Yellow / Green End Plate EPCXS2.5 EPCXS2.5 EPCXS2.5 EPCXS2.5 DIN Rail CA701-15/S CA701-15/S CA701-15/S End Stop CA702 CA802 CA3 CA702 CA802 CA3 CA702 CA802 CA3 JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/ 0 JX4/2 JX4/3 JX4/4 JX4/8 JX4/ JX4/16 0 JX2.5/2 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/ 0 Test Plug TX2.5 Marking Tag Warning Label MT5 WLX MT5 WLX2.5 Shorting Link/ Jumpers 5 pole 6 pole 7 pole 8 pole pole 16 pole 0 0 MT5 WL Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

78 CX-PLUGGABLE SPRING TERMINAL BLOCKS PLUGGABLE FEED-THROUGH TERMINAL BLOCKS CX2.5/1B CX2.5PN CX2.5SN HIGHLIGHTS FEATURES Pluggable Pluggable Wire to DIN Rail connection (CX2.5/1B-CX2.5PN) Pluggable Wire to Wire Connection (CX2.5SN - CX2.5PN) Easy Clip multi-wire solution Polarizing plug with coding pin CXPOL 2/4 way strain relief (CXS2RN, CXS4RN) APPLICATIONS Wire harness for easy connection Pluggable wire to wire connection inside panels CXSR4N CX2.5PN CX2.5/1B CXLPN Dimensions & Weight Length Height w DIN Rail Weight per piece Wire Stripping Length Screwdriver 35 x 7.5 mm CB SCHEME Grey (standard) Start Element Last Element 5 pole 6 pole 5 mm.8 mm 38.2 mm 45.7 mm 6.6 g Wire Size (solid / stranded) AWG mm 2 Voltage Rating 300 V 800 V Current Rating A 24 A Insulation Material DIN Rail Base 8 mm Flat Head 0.5 x 3 mm CX2.5/1B 0 5 mm 17.5 mm 6.3 g AWG mm V 800 V A 24 A Stackable Terminal Plug 42.0 mm UL UL UL 8 mm Flat Head 0.5 x 3 mm CX2.5PN CX2.5PLN CX2.5PN/2 CX2.5PN/3 CX2.5PN/3 CX2.5PN/4 CX2.5PN/5 5 mm 18 mm 6.0 g AWG mm V 800 V A 24 A Stackable Terminal Socket 40.0 mm 8 mm Flat Head 0.5 x 3 mm CX2.5SN CX2.5SLN CX2.5SN/2 CX2.5SN/3 CX2.5SN/4 CX2.5SN/5 CX2.5SN/6 End Plate EPCX2.5 CX2.5PN DIN Rail CXSR2N End Clamp Shorting Link/ Jumpers DIN Mounting Foot 5 pole 6 pole 7 pole 8 pole pole CA702 CA802 CA3 JX2.5/2 0 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/ CA702 CA802 CA3 CA702 CA802 CA3 CXDIN 25 Locking Clip CXLPN 25 CXDIN Strain Relief 2 Way 4 Way CXSR2N 25 CXSR4N 25 CXSR2N 25 CXSR4N 25 Coding Pin CXPOL 25 CXPOL 25 CXPOL 25 Marking Tag MT5 1 Pk. (0 tags) MT5 1 Pk. (0 tags) MT5 1 Pk. (0 tags) 78 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

79 COMPACT HYBRID DISTRIBUTION TERMINAL BLOCKS CXDB35/ CXDB35/A CX-DISTRIBUTION SPRING TERMINAL BLOCKS HIGHLIGHTS Dimensions & Weight Length Height w DIN Rail Weight per piece 35 x 7.5 mm General Specifications CB SCHEME INPUT 1 Flat Head Screw Input 4 Spring Clamp Outputs mm 54.3 mm 53.2 g E2514 Voltage Rating 600 V 00V AC/DC Insulation Material 1 Hex Screw Input 4 Spring Clamp Outputs mm 54.3 mm 53.2 g 600 V 00V AC/DC with Allen Screw E2514 FEATURES Hybrid Distribution Terminal Block Screw input (115A) 4 spring clamp outputs (4 x41a) Modular system Standard slot & hex screw versions Expandable with standard CX Series jumpers and terminal blocks Easy Installation APPLICATIONS Miniature Circuit Breaker (MCB) distribution Limited space distribution Output Expansion CXDB35/A Wire Size (solid / stranded) 14-2 AWG mm AWG mm 2 Current Rating 115 A 125 A 115 A 125 A Torque 25 lb-in 2.5 Nm 25 lb-in 2.5 Nm Wire Stripping Length 17 mm 17 mm Screwdriver Flat Head 1.0 x 5.5 mm Hex Screw M5 OUTPUT Wire Size (solid / stranded) 24-8 AWG 0.2- mm AWG 0.2- mm 2 Current Rating 41 A 41 A 41 A 41 A Wire Stripping Length 15 mm 15 mm Screwdriver Flat Head 0.8 x 4 mm Flat Head 0.8 x 4 mm JX6/3 2 x CX6 (see page 64) MCB Distribution Example Grey CXDB35/ DIN Rail End Clamp Jumpers Marking Tag CA702 CA802 CA3 JX6/2 0 JX6/3 JX6/4 JX6/ MT16 1 Pk. (0 tags) CXDB35/A CA702 CA802 CA3 JX6/2 0 JX6/3 JX6/4 JX6/ MT16 1 Pk. (0 tags) Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

80 ANGULAR SERIES SPRING TERMINAL BLOCKS HIGHLIGHTS AS2.5 ANGULAR FEED-THROUGH AS4 AS6 FEATURES 45 Wire entry for easy installation 2.5mm to 8mm terminal blocks 22-8 AWG wire sizes 2, 3, and 4 Connection Ground Terminals APPLICATIONS Panels with limited wiring space Vibration Applications Elevator Cabinets People Movers Transportation Dimensions & Weight Height w DIN Rail 35 x 7.5 mm 5 mm 44.0 mm 51.0 mm 44.0 mm 51.0 mm Wire Stripping Length 11 mm 15 mm Screwdriver Flat Head 0.5 x 3mm Flat Head 0.6 x 3.5 mm Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W 2 Connection Feed-Through 2 Jumper Slots AS2.5 0 AS2.5/R 0 AS2.5/BU 0 AS2.5/BL 0 AS2.5/O 0 AS2.5/G 0 AS2.5/Y 0 AS2.5/W 0 Length 54 mm 61.5 mm Weight per piece 6.5 g 9.0 g CB SCHEME E2514 E2514 E2514 Wire Size (solid / stranded) AWG mm AWG mm AWG Voltage Rating 600 V 800V AC/DC 600 V 800V AC/DC 600 V 800V AC/DC Current Rating 25 A 24 A 35 A 32 A A 41 A Insulation Material 2 Connection Feed-Through 2 Jumper Slots AS4 0 AS4/R 0 AS4/BU 0 AS4/BL 0 AS4/O 0 AS4/G 0 AS4/Y 0 AS4/W 0 2 Connection Feed-Through 2 Jumper Slots 8 mm 74 mm 49.3 mm 57.0 mm 14.8 g 15 mm Flat Head 0.8 x 4 mm AS6 AS6/R AS6/BU AS6/BL AS6/O AS6/G AS6/Y AS6/W End Plate EPAS2.5 EPAS4 EPAS6 DIN Rail End Stop CA3 CA702 CA802 CA3 CA702 CA802 2 Pole Jumper CA801/1 0 CA801/2 0 CA3 CA702 CA802 CA801/3 0 Jumpers Alternate CA801/1-3 0 CA801/2-3 0 CA801/3-3 0 Push in wire jumper CA901/1 0 CA901/2 0 CA901/3 0 Step Down Jumper AS6 to AS4 AS6 to AS2.5 AS4 to AS2.5 AS6 to AS2.5 CA901/5 0 CA901/6 0 CA801/8 0 CA901/4 0 CA901/6 0 Marking Tag MT5 1 Pk. (0 tags) MT6 1 Pk. (0 tags) CA901/4 0 CA901/5 0 CA801/8 0 MT8 1 Pk. (0 tags) 80 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

81 MULTI-CONNECTION ANGULAR FEED-THROUGH AS2.5/3 AS2.5/4 AS4/3 ANGULAR SERIES SPRING TERMINAL BLOCKS AS4/4 Dimensions & Weight Height w DIN Rail 35 x 7.5 mm 3 Connection Feed-Through 2 Jumper Slots 5 mm 44.0 mm 51.0 mm 4 Connection Feed-Through 3 Connection Feed-Through 2 Jumper Slots Length 54 mm 54 mm 61.5 mm 5 mm 44.0 mm 51.0 mm 44.0 mm 51.0 mm Weight per piece 7.5 g 15.5 g 11.0 g 4 Connection Feed-Through 61.5 mm 44.0 mm 51.0 mm 12.6 g CB SCHEME E2514 E2514 E2514 E2514 Wire Size (solid / stranded) AWG mm AWG mm AWG mm AWG mm 2 Voltage Rating 600 V 800V AC/DC 600 V 800V AC/DC 600 V 800V AC/DC 600 V 800V AC/DC Current Rating 25 A 24 A 25 A 24 A 35 A 32 A 35 A 32 A Insulation Material Wire Stripping Length 11 mm 11 mm 15 mm Screwdriver Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Flat Head 0.6 x 3.5 mm Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W AS2.5/3 0 AS2.5/3/R 0 AS2.5/3/BU 0 AS2.5/3/BL 0 AS2.5/3/O 0 AS2.5/3/G 0 AS2.5/3/Y 0 AS2.5/3/W 0 AS2.5/4 0 AS2.5/4/R 0 AS2.5/4/BU 0 AS2.5/4/BL 0 AS2.5/4/O 0 AS2.5/4/G 0 AS2.5/4/Y 0 AS2.5/4/W 0 AS4/3 0 AS4/3/R 0 AS4/3/BU 0 AS4/3/BL 0 AS4/3/O 0 AS4/3/G 0 AS4/3/Y 0 AS4/3/W 0 15 mm Flat Head 0.6 x 3.5 mm AS4/4 0 AS4/4/R 0 AS4/4/BU 0 AS4/4/BL 0 AS4/4/O 0 AS4/4/G 0 AS4/4/Y 0 AS4/4/W 0 End Plate EPAS2.5 EPAS2.5 EPAS4 EPAS4 DIN Rail End Stop CA3 CA702 CA802 CA3 CA702 CA802 2 Pole Jumper CA801/1 0 DOES NOT ACCEPT JUMPERS CA3 CA702 CA802 CA801/2 0 CA3 CA702 CA802 DOES NOT ACCEPT JUMPERS Jumpers Alternate CA801/1-3 0 CA801/2-3 0 Push in wire jumper CA901/1 0 CA901/2 0 Step Down Jumper AS6 to AS4 AS6 to AS2.5 AS4 to AS2.5 AS6 to AS2.5 CA901/5 0 CA901/6 0 CA801/8 0 Marking Tag MT5 1 Pk. (0 tags) MT5 1 Pk. (0 tags) CA901/4 0 CA901/6 0 MT6 1 Pk. (0 tags) MT6 1 Pk. (0 tags) Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

82 ANGULAR SERIES SPRING TERMINAL BLOCKS AS6/3 DOUBLE LEVEL ANGULAR FEED-THROUGH ADL2.5(E)D1/D2 ADLG ADL2.5(E)D1 3 4 ADL2.5(E)D2 Dimensions & Weight Length Height w DIN Rail 35 x 7.5 mm Weight per piece 8 mm 74 mm 49.5 mm 57 mm 18.6 g Wire Size (solid / stranded) 22-8 AWG AWG mm AWG 0.34 mm 2 Voltage Range 600 V 800 V 300 V 800 V 600 V 800 V Current Rating A 41 A 25 A 24 A A 24 A Insulation Material Wire Stripping Length Screwdriver Grey (standard) Red Blue Black Orange Green Yellow White R BU BL O G Y W CB SCHEME 3 Connection Feed-Through 2 Jumper Slots E mm Flat Head 0.8 x 4 mm AS6/3 AS6/3/R AS6/3/BU AS6/3/BL AS6/3/O AS6/3/G AS6/3/Y AS6/3/W Double Level with built-in Diode for circuit protection 5 mm 79.5 mm 57.5 mm 65 mm 14.0 g E mm Flat Head 0.5 x 3 mm ADL2.5(E)D1 ADL2.5(E)D2 Double Level with additional snap-on grounding connection 5 mm 83.7 mm 64.8 mm 72.3 mm.9 g E2514 mm Flat Head 0.5 x 3 mm ADLG2.5 Yellow/Green End Plate EPAS6 EPADL2.5 EPADLG2.5 DIN Rail End Stop CA3 CA702 CA802 Jumpers Adjacent CA801/3 0 Jumpers Alternate CA801/3-3 0 Push in wire jumper CA901/3 0 CA3 CA702 CA802 CA801/1 0 CA801/1-3 0 CA901/1 0 CA3 CA702 CA802 Step Down Jumper AS6 to AS4 AS6 to AS2.5 AS4 to AS2.5 AS6 to AS2.5 CA901/4 0 CA901/5 0 CA801/8 0 CA901/5 0 CA901/6 0 CA901/8 0 Marking Tag MT8 1 Pk. (0 tags) MT5 1 Pk. (0 tags) MT2G 1 Pk. (0 tags) 82 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

83 TRIPLE LEVEL ANGULAR SPRING CLAMP ATL2.5 ATL2.5H ATLG2.5 ANGULAR SERIES SPRING TERMINAL BLOCKS Dimensions & Weight Height w DIN Rail 35 x 7.5 mm 5 mm Length 0 mm 76.1 mm 0 mm 75.0 mm 82.5 mm Wire Stripping Length mm mm mm Screwdriver Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W ATL2.5 0 ATL2.5/R 0 ATL2.5/BU 0 ATL2.5/BL 0 ATL2.5/O 0 ATL2.5/G 0 ATL2.5/Y 0 ATL2.5/W 0 5 mm 75.0 mm 82.5 mm ATL2.5H 0 ATL2.5H/R 0 ATL2.5H/BU 0 ATL2.5H/BL 0 ATL2.5H/O 0 ATL2.5H/G 0 ATL2.5H/Y 0 ATL2.5H/W 0 5 mm 75.0 mm 82.5 mm Weight per piece 19.4 g 12.2 g 23.6 g CB SCHEME Triple Level Spring Terminal Jumper Slot on each Level Triple Level with top level Feed-Through and mid/bottom level connections UL Triple Level with additional snap-on grounding connection E2514 E2514 Wire Size (solid / stranded) AWG mm AWG mm AWG mm 2 Voltage Rating 600 V 0 V - 0 V 600 V 0 V Current Rating A 24 A - 24 A A 24 A Insulation Material ATLG2.5 0 Yellow/Green End Plate EPATL2.5 EPATL2.5H EPATLG2.5 DIN Rail End Stop Push In Jumpers pole CA702 CA802 CA2 CA3 CA801/A2 0 CA801/A3 0 CA801/A4 0 CA801/A CA702 CA802 CA2 CA3 CA801/A2 0 CA801/A3 0 CA801/A4 0 CA801/A CA702 CA802 CA2 CA3 CA801/A2 0 CA801/A3 0 CA801/A4 0 CA801/A Marking Tag MT2G 1 Pk. (0 tags) MT2G 1 Pk. (0 tags) MT2G 1 Pk. (0 tags) Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

84 ANGULAR SERIES SPRING TERMINAL BLOCKS AGT2.5 GROUND / EARTH ANGULAR SPRING CLAMP AGT4 AGT6 AGT2.5/3 Dimensions & Weight Height w DIN Rail 35 x 7.5 mm 2 Connection Ground Terminal Feed-Through 5 mm Length 54 mm 61.5 mm 74 mm 49.5 mm 57 mm 2 Connection Ground Terminal Feed-Through 8 mm 55.5 mm 63 mm Weight per piece 13.5 g 12.0 g 19.0 g 49.5 mm 57 mm 2 Connection Ground Terminal Feed-Through 3 Connection Ground Terminal Feed-Through 5 mm 54 mm 49.5 mm 57 mm 14.5 g Wire Size (solid / stranded) AWG mm AWG mm AWG Voltage Rating 600 V 800V AC/DC 600 V 800V AC/DC 600 V 800V AC/DC Current Rating Insulation Material Wire Stripping Length 11 mm 15 mm 15 mm Screwdriver Flat Head 0.5 x 3 mm Flat Head 0.6 x 3.5 mm Flat Head 0.8 x 4 mm Yellow/Green AGT2.5 0 End Plate CB SCHEME E2514 E2514 E AWG mm V 800V AC/DC mm Flat Head 0.5 x 3 mm EPAS2.5 AGT4 0 EPAS4 EPAS6 E2514 AGT6 AGT2.5/3 0 EPAS2.5 DIN Rail Marking Tag MT5 1 Pk. (0 tags) MT6 1 Pk. (0 tags) MT8 1 Pk. (0 tags) MT5 1 Pk. (0 tags) 84 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

85 GROUND / EARTH ANGULAR SPRING CLAMP AGT2.5/4 AGT4/3 AGT4/4 ANGULAR SERIES SPRING TERMINAL BLOCKS AGT6/3 Dimensions & Weight 4 Connection Ground Terminal Feed-Through 3 Connection Ground Terminal Feed-Through 4 Connection Ground Terminal Feed-Through 3 Connection Ground Terminal Feed-Through 5 mm 8 mm Length 54 mm 61.5 mm 61.5 mm 74 mm Height w DIN Rail 35 x 7.5 mm 44.0 mm mm mm mm 57.0 mm Weight per piece 15.5 g 14.5 g 18.6 g 22.0 g CB SCHEME E2514 E2514 E2514 E2514 Wire Size (solid / stranded) AWG mm AWG mm AWG mm AWG Voltage Rating 600 V 800V AC/DC 600 V 800V AC/DC 600 V 800V AC/DC 600 V 800V AC/DC Current Rating Insulation Material Wire Stripping Length 12 mm 15 mm 15 mm 15 mm Screwdriver Flat Head 0.5 x 3 mm Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Flat Head 0.8 x 4 mm Yellow/Green AGT2.5/4 0 AGT4/3 0 AGT4/4 AGT6/3 0 End Plate EPAS2.5 EPAS4 EPAS4 EPAS6 DIN Rail Marking Tag MT5 1 Pk. (0 tags) MT6 1 Pk. (0 tags) MT6 1 Pk. (0 tags) MT8 1 Pk. (0 tags) Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

86 ACCESSORIES SPRING TERMINAL BLOCKS JUMPERS / SHORTING LINKS CX SERIES Push-In Technology Multipole Jumpers Terminal Block Series Poles 2 Pole JX2.5/2 0 CX2.5 Series CXG2.5 Series CXDL2.5 CXK2.5 CXS2.5 3 Pole JX2.5/3 4 Pole JX2.5/4 5 Pole JX2.5/5 6 Pole JX2.5/6 7 Pole JX2.5/7 8 Pole JX2.5/8 Pole JX2.5/ CX4 Series CXG4 Series CXF4 CXCC4 CXS4 2 Pole JX4/2 0 3 Pole JX4/3 4 Pole JX4/4 8 Pole JX4/8 Pole JX4/ 16 Pole JX4/16 Easy Breakout Felt-Tip Marking CX6 Series CXG6 Series CXDB35/ 2 Pole JX6/2 0 3 Pole JX6/3 4 Pole JX6/4 Pole JX6/ 2 Jumper Channels CX Series CXG Series 2 Pole JX/2 ANGULAR SERIES 2 Pole Adjectant Jumper Alternate Jumper Push-In Wire Jumper Alternate Jumper Push-In Wire Jumper 2 Pole Adjectant Jumper Terminal Block Series AS2.5 / ADL2.5 Series CA801/1 0 CA801/1-3 0 CA901/1 0 AS4 Series CA801/2 0 CA801/2-3 0 CA901/2 0 AS6 Series CA801/3 0 CA801/3-3 0 CA901/3 0 STEP DOWN JUMPERS Used for jumpering terminal blocks of different sizes. CX SERIES ANGULAR SERIES Jumper for CX to CX2.5 JXS/2.5 CX6 to CX2.5 JXS6/2.5 CX to CX4 JXS/4 CX6 to CX4 JXS6/4 Jumper for AS6 to AS2.5 CA901/5 0 AS6 to AS4 CA901/4 0 AS4 to AS2.5 CA901/ Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

87 ENDPLATES CX SERIES ANGULAR SERIES ACCESSORIES SPRING TERMINAL BLOCKS Terminal Block Dimensions CX2.5 CXG2.5 EPCX x 49.7 x 1.5mm CX4 CXG4 CX6 CXG6 CX CXG CX2.5/3 CXG2.5/3 CXK2.5 CX2.5/4 CXG2.5/4 CX4/3 CXG4/3 CXK4 CX4/4 CXG4/4 CX6/3 CXG6/3 CX/3 CXG/3 CXDL2.5 CXDLG2.5 CXS2.5 CXS4 EPCX x 54.8 x 1.5mm EPCX x 62.1 x 1.5mm EPCX 41.6 x 70 x 1.5mm EPCX2.5/ x 62.2 x 1.5mm EPCX2.5/ x 74.7 x 1.5mm EPCX4/ x 70.5 x 1.5mm EPCX4/ x 86.2 x 1.5mm EPCX6/ x 82.2 x 1.5mm EPCX/ x 95.3 x 1.5mm EPCXDL x 72.7 x 1.5mm EPCXS x 43 x 1.5mm EPCXS4 Terminal Block Dimensions AS2.5 AS2.5/XX AGT2.5 EPAS x 54 x 1.5mm AGT2.5/XX AS4 AS4/XX AGT4 EPAS x 61 x 1.5mm AGT4/XX AS6 AS6/XX AGT6 AGT6/XX ADL2.5 ADLG2.5 ATL2.5 ATL2.5H ATLG2.5 END STOPS CA802 EPAS x 74 x 1.5mm EPADL x 80 x 1.5mm EPADLG x 58 x 1.2mm EPATL2.5 0 x 69.7 x 1.2mm EPATL2.5H 77.3 x 69.7 x 1.2mm EPATLG2.5 0 x 68.7 x 1.2mm CA3 Screwless Snap On Dimensions CA3 35 x 41 x 6mm CA702 PARTITION PLATES Dimensions CA x 45 x 8mm Dimensions CA x 45 x 9mm CX SERIES TEST PLUGS Terminal Block Dimensions CX2.5, CXG2.5 CX4, CXG4 CX2.5/3, CXG2.5/3 CX4/3, CXK2.5 CX2.5/4, CXG2.5/4 CX4/4, CXK4/4 CX6, CX PPCX x 59 x 2mm PPCX4/ x 74.7 x 2mm PPCX4/ x 95 x 2mm PPCX x 76 x 1mm Terminal Block CX2.5, CXG2.5, CXDL2.5, CXG4, TX2.5 CXM2.5, CXMG2.5 CX4, CXG4, CX7, CXG6 TX4 CX6, CXDB TX6 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

88 OVERVIEW MINI / PANEL MOUNT TERMINALS INTRODUCTION SCREW CLAMP TECHNOLOGY Screw clamp & Spring Clamp Technology versions Extremely Compact wiring solution 15mm Mini Rail Terminals Modular easy snap together Panel Mount Terminals High Temperature Ceramic Solution Reliable Gas-tight connection E2514 MATERIAL SPECIFICATIONS Current Carrying Metal Screw Terminals Corrosion free material Clamp: Zinc Plated Steel Screw: Steel Current Bar: Brass/ Tin Plated Copper Spring Terminals Corrosion free material Spring: Stainless Steel Current Bar: Copper Alloy Terminal Block Housing Polyamide PA66 Housing Self-extinguishing High mechanical strength Specifications Upper Temperature Limit: 5 C Lower Temperature Limit: - C Flammability UL94: V2/ V0 Volume Resistivity: 12 Ω cm Surface Resistivity: Ω SELECTION GUIDE Screw Extremely Compact size Various mounting options 15mm Mini Rail Panel Mount Modular system Jumper Screw Clamp Technology 15mm Mini Rail CMT4 page 89 Panel Mount CMB4 page 90 Spring Clamp Extremely Compact size Various mounting options 15mm Mini Rail Panel Mount Modular Snap together Systems Spring Clamp Technology 15mm Mini Rail CXM2.5 page 91 Panel/DIN Rail CSCP Series page 92 Panel Mount CM Series page 93 High Temperature Ceramic High Temperatures up to 600 C Ceramic Material 3 sizes Up to 65A/ 300V Free floating or mounting hole option High Temperature CB Series page Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

89 MINI RAIL SCREW TERMINAL BLOCKS CMT4 CGMT4 MINI RAIL CMT SERIES MINI / PANEL MOUNT TERMINALS CF4U HIGHLIGHTS Dimensions & Weight Height w DIN15 Rail 15mm 30.4 mm 30.7 mm Weight per piece 5.5 g 9.5 g Wire Stripping Length 8 mm 8 mm Screwdriver Flat Head 0.6 x 3.5 mm Flat Head 0.6 x 3.5 mm Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W CMT4 0 CMT4/R 0 CMT4/BU 0 CMT4/BL 0 CMT4/O 0 CMT4/G 0 CMT4/Y 0 CMT4/W 0 Length 27 mm 27 mm E2514 Wire Size (solid / stranded) 22- AWG mm AWG mm 2 Voltage Rating 300 V 0 V AC/DC 300 V 0 V AC/DC Current Rating 35 A 32 A - - Torque 7 lb-in 0.5 Nm 7 lb-in 0.8 Nm Insulation Material 2 Connection Feed-Through Internal Jumper Provision 2 Connection Ground Terminal Internal Jumper Provision E2514 CGMT4 0 Yellow/Green 5 x mm Fuse Terminal 8 mm 57.0 mm.3 mm g E AWG mm V 800 V AC/DC A 6.3 A 7 lb-in 0.5 Nm 9.5 mm Flat Head 0.6 x 3.5 mm CF4U CF4U/BU CF4U/BL FEATURES Extremely Compact Size Screw Cage Clamp Mountable on DIN15 Mini Rail Feed Through Terminal Ground Terminal Internal Jumper possibility EX / IECEx approved APPLICATIONS Limited Space Panels High Density Wiring Solutions End Plate EPCMT4 Isolation Partition PPCMT4 DIN Rail 15mm CA601/S CA601/S CA601/S End Clamp CA602 0 CA602 0 Internal Jumper Insulated Internal Jumper pole pole CA727/2 0 CA727/3 0 CA727/4 0 CA727/ CA747/2 0 CA747/3 0 CA747/4 0 CA747/ External Jumper CA714/2 0 CA714/3 0 CA714/4 0 pole CA714/ Test Socket CA707/TS/03 0 CA714/2 0 CA714/3 0 CA714/4 0 CA714/ CA711/2 0 CA711/3 CA711/4 CA711/ CA707/TS/03 Marking Tag MT2 1 Pk. (0 tags) MT2 1 Pk. (0 tags) MT8 MT6 1 Pk. (0 tags) 1 Pk. (0 tags) Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

90 PANEL MOUNT CMB SERIES MINI / PANEL MOUNT TERMINALS PANEL MOUNT SCREW TERMINAL BLOCKS CMB4 HIGHLIGHTS FEATURES Extremely Compact Size Screw Cage Clamp Panel Mountable with any length M3 screw End / Mounting Section with M3 mounting holes Stackable design for flexible length configurations Modular snap-together design for quick assembly and installation Endplates with mounting holes Internal Jumper possibility EX / IECEx approved Pre-assembled Blocks available in all pole configurations and various colors APPLICATIONS Cost Effective Wiring Solutions Compact Wiring Solutions Panel Mount Designs High Density Wiring Dimensions & Weight Length Height Weight per piece Wire Stripping Length Screwdriver Mounting Screw Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W 27 mm 28 mm 5.5 g E2514 Wire Size (solid / stranded) 22- AWG mm 2 Voltage Rating 300 V 0 V AC/DC Current Rating 35 A 32 A Torque 7 lb-in 0.5 Nm Insulation Material 8 mm Flat Head 0.6 x 3.5mm Any length M3 screw may be used 2 Connection Feed Through CMB4 0 CMB4/R 0 CMB4/BU 0 CMB4/BL 0 CMB4/O 0 CMB4/G 0 CMB4/Y 0 CMB4/W 0 Pre-assembled No. of Poles Cat. No Total (a) Hole Spacing (b) 2 CMB4/2 2 (1.02 ) 19 mm (0.75 ) 3 CMB4/3 32 mm (1.26 ) 25 mm (0.98 ) 4 CMB4/4 38 mm (1. ) 31 mm (1.22 ) 5 CMB4/5 44 mm (1.73 ) 37 mm (1.46 ) 6 CMB4/6 mm (1.97 ) 43 mm (1.69 ) 7 CMB4/7 5 (2. ) 49 mm (1.93 ) 8 CMB4/8 62 mm (2.44 ) 55 mm (2.17 ) 9 CMB4/9 68 mm (2.68 ) 61 mm (2.40 ) CMB4/ 74 mm (2.91 ) 67 mm (2.64 ) 11 CMB4/11 80 mm (3.15 ) 73 mm (2.87 ) 12 CMB4/12 8 (3.39 ) 79 mm (3.11 ) 13 CMB4/13 92 mm (3.62 ) 85 mm (3.35 ) 14 CMB4/14 98 mm (3.86 ) 91 mm (3.58 ) 15 CMB4/15 4 mm (4.09 ) 97 mm (3.82 ) 16 CMB4/16 1 mm (4.33 ) 3 mm (4.06 ) 17 CMB4/17 11 (4.57 ) 9 mm (4.29 ) 18 CMB4/ mm (4.80 ) 115 mm (4.53 ) 19 CMB4/ mm (5.04 ) 121 mm (4.76 ) CMB4/ 134 mm (5.28 ) 127 mm (5.00 ) 21 CMB4/ mm (5.51 ) 133 mm (5.24 ) 22 CMB4/22 14 (5.75 ) 139 mm (5.47 ) 23 CMB4/ mm (5.98 ) 145 mm (5.71 ) 24 CMB4/ mm (6.22 ) 151 mm (5.94 ) b a Dimensions CMB4 End / Mounting Section EPCMB4 Separator Plate SPCMB4 Internal Jumper Insulated Internal Jumper External Jumper pole pole pole CA727/2 0 CA727/3 0 CA727/4 0 CA727/ CA747/2 0 CA747/3 0 CA747/4 0 CA747/ CA714/2 0 CA714/3 0 CA714/4 0 CA714/ Test Socket CA707/TS/01 0 CMB4 Terminal Block Mounting Section Dimensions EPCMB4 4 Pole Internal Jumper CA727/4 Marking Tag MT2 1 Pk. (0 tags) End / Mounting Section EPCMB4 90 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

91 MINI RAIL SPRING TERMINAL BLOCKS MINI RAIL CXM SERIES MINI / PANEL MOUNT TERMINALS CXM2.5 CXMG2.5 CMS2.5 HIGHLIGHTS Dimensions & Weight 5 mm Height w DIN Rail 15 x 5.5 mm 35 mm 35 mm Weight per piece 5.9 g.3 g Wire Stripping Length mm mm Screwdriver Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W CXM2.5 0 CXM2.5/R 0 CXM2.5/BU 0 CXM2.5/BL 0 CXM2.5/O 0 CXM2.5/G 0 CXM2.5/Y 0 CXM2.5/W 0 5 mm Length 37 mm 37 mm CB SCHEME E2514 E2514 Wire Size (solid / stranded) AWG mm AWG mm 2 Voltage Rating 600 V 00V AC/DC 600 V 00V AC/DC Current Rating A 24 A - - Insulation Material 2 Connection Feed Through 2 Jumper Channels 2 Connection Ground Terminal 2 Jumper Channels CXMG2.5 0 Yellow/Green 5 mm 31 mm mm 5.9 g AWG mm V 800V AC/DC A 24 A Side Entry Feed Through UL 9 mm Flat Head 0.5 x 3 mm CMS2.5 0 CMS2.5/R 0 CMS2.5/BU 0 CMS2.5/BL 0 CMS2.5/O 0 CMS2.5/G 0 CMS2.5/Y 0 CMS2.5/W 0 FEATURES Extremely Compact Size Spring Clamp Style Mountable on DIN 15 Mini Rail Feed Through Terminal Ground Terminal Side Entry Feed Through 2, 3, 4, 5, 6, 7, pole Push-In Jumpers EX / IECEx approved APPLICATIONS Limited Space Panels High Density Wiring Solutions Machine Control Panels High Vibration Applications End Plate EPCXM2.5 EPCXM2.5 EPCMS2.5 DIN Rail 15mm CA601/S CA601/S CA601/S End Clamp CA602 0 CA602 0 CA602 0 Jumper JX2.5/2 0 JX2.5/3 JX2.5/4 5 pole JX2.5/5 6 pole JX2.5/6 7 pole JX2.5/7 8 pole JX2.5/8 pole JX2.5/ Spring Clamp Actuator Marking Tag SCA2-5 1 MT5 1 Pk. (0 tags) JX2.5/2 0 JX2.5/3 JX2.5/4 JX2.5/5 JX2.5/6 JX2.5/7 JX2.5/8 JX2.5/ SCA2-5 1 MT5 1 Pk. (0 tags) MT5 1 Pk. (0 tags) Operating Tool for use with CXM2.5 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

92 PANEL MOUNT CSCP SERIES MINI / PANEL MOUNT TERMINALS PANEL MOUNT SPRING TERMINAL BLOCKS CSCP2.5T CSCP2.5T2 CXCP2.5/4 HIGHLIGHTS FEATURES Extremely Compact Size Screw Cage Clamp Panel Mountable with any screw Endplates with screw flange Stackable design for flexible length configurations Modular snap-together design for quick assembly and easy installation External Jumper possibility EX / IECEx approved Custom assemblies available in all pole configurations and various colors APPLICATIONS Cost Effective Panel Mount Designs Limited Space Panels High Density Wiring Solutions Machine Control Panels High Vibration Applications Operating Tool for use with CSCP2.5T2 Custom Assembly Example Dimensions & Weight Height w DIN Rail 35 x 7.5 mm 5 mm 21.3 mm (Panel Mount) 21.3 mm (Panel Mount) Weight per piece 5.0 g 9.5 g Wire Stripping Length 11 mm 11 mm Screwdriver Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Mounting Screw Any length M3 screw may be used Any length M3 screw may be used Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W CSCP2.5T 0 CSCP2.5T/R 0 CSCP2.5T/BU 0 CSCP2.5T/BL 0 CSCP2.5T/O 0 CSCP2.5T/G 0 CSCP2.5T/Y 0 CSCP2.5T/W 0 mm Length 35 mm 35 mm E Connection Spring Terminal Panel Mount 4 Connection Spring Terminal Panel Mount E2514 Wire Size (solid / stranded) AWG mm AWG mm 2 Voltage Rating 600 V 800 V AC/DC 600 V 800 V AC/DC Current Rating A 24 A A 24 A Insulation Material CSCP2.5T2 0 CSCP2.5T2/R 0 CSCP2.5T2/BU 0 CSCP2.5T2/BL 0 CSCP2.5T2/O 0 CSCP2.5T2/G 0 CSCP2.5T2/Y 0 CSCP2.5T2/W 0 End Section EPCSCP2.5T 25 EPCSCP2.5T 25 Insulated Jumpers CA803/1 0 CA803/1 0 () Marking Tag MT4 1 Pk. (0 tags) MT3 1 Pk. (0 tags) mm 35 mm 34.5 mm 42 mm 9.5 g E AWG mm V 800 V AC/DC A 24 A CXCP2.5/4 0 CXCP2.5/4/R 0 CXCP2.5/4/BU 0 CXCP2.5/4/BL 0 CXCP2.5/4/O 0 CXCP2.5/4/G 0 CXCP2.5/4/Y 0 CXCP2.5/4/W 0 CA803/1 0 MT3 4 Connection Spring Terminal DIN Rail Mount mm Flat Head 0.5 x 3 mm EPCXCP Pk. (0 tags) Operating Tool SCA2-5 1 SCA2-5 1 SCA2-5 1 EPCSCP2.5T PANEL MOUNT CSCP2.5T2 DIN RAIL MOUNT CSCP2.5T2 EPCSCP2.5T CSCP2.5T CXCP2.5/14 DIN Rail Mounting Foot CSCP2.5T SCREW FLANGE 92 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

93 MICRO PANEL MOUNT SPRING TERMINAL BLOCKS CM1.5S CM2.5S MICRO CM SERIES CM4S MINI / PANEL MOUNT TERMINALS HIGHLIGHTS CM1.5S CM2.5S CM4S CM1.5S2 CM2.5S2 CM4S2 FEATURES Extremely Compact Size Spring Clamp Style End Sections with screw flanges 3 wire sizes 2, 4 connection terminals All colors Dimensions 2 Connection 4 Connection CM1.5S2 5 mm 8 mm CM2.5S2 mm CM4S2 7 mm 12 mm Length 26.5 mm 30.0 mm 33.7 mm APPLICATIONS Transformer Terminal Blocks Very Limited Space Applications Machine Control Panels Height (Panel Mount) 2 Connections Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W 18.0 mm CM1.5S 0 CM1.5S/R 0 CM1.5S/BU 0 CM1.5S/BL 0 CM1.5S/O 0 CM1.5S/G 0 CM1.5S/Y 0 CM1.5S/W 0.0 mm Weight per piece 1.8 / 3.8 g 3.2 / 5.2 g g CB SCHEME CM2.5S 0 CM2.5S/R 0 CM2.5S/BU 0 CM2.5S/BL 0 CM2.5S/O 0 CM2.5S/G 0 CM2.5S/Y 0 CM2.5S/W mm E2514 E2514 E2514 Wire Size (solid / stranded) AWG mm AWG mm AWG mm 2 Voltage Rating 300 V 0V AC/DC 300 V 0V AC/DC 300 V 630V AC/DC Current Rating A 17 A A 24 A 26 A 32 A Insulation Material Wire Stripping Length 8 mm 9 mm 8 mm Screwdriver Flat Head 0.5 x 3 mm Flat Head 0.5 x 3 mm Flat Head 0.6 x 3.5 mm CM4S 0 CM4S/R 0 CM4S/BU 0 CM4S/BL 0 CM4S/O 0 CM4S/G 0 CM4S/Y 0 CM4S/W 0 4 Connections Grey (standard) Red R Blue BU Black BL Orange O Green G Yellow Y White W End Plate CM1.5S2 0 CM1.5S2/R 0 CM1.5S2/BU 0 CM1.5S2/BL 0 CM1.5S2/O 0 CM1.5S2/G 0 CM1.5S2/Y 0 CM1.5S2/W 0 EPCM1.5S CM2.5S2 0 CM2.5S2/R 0 CM2.5S2/BU 0 CM2.5S2/BL 0 CM2.5S2/O 0 CM2.5S2/G 0 CM2.5S2/Y 0 CM2.5S2/W 0 EPCM2.5S CM4S2 0 CM4S2/R 0 CM4S2/BU 0 CM4S2/BL 0 CM4S2/O 0 CM4S2/G 0 CM4S2/Y 0 CM4S2/W 0 EPCM4S Spring Clamp Actuator SCA2-5 1 SCA2-5 1 SCA2-5 1 Marking Tag 2 Connection 4 Connection MT4 MT7.5 1 Pk. (0 tags) 1 Pk. (0 tags) MT2 MT7.5 1 Pk. (0 tags) 1 Pk. (0 tags) MT6 MT12 1 Pk. (0 tags) 1 Pk. (0 tags) Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

94 EUROBLOCKS HIGH TEMPERATURE CERAMIC EUROBLOCKSTM PANEL MOUNT TERMINALS CB4 CB6 CB16 HIGHLIGHTS FEATURES Suitable for High Temperatures up to 600 C (1112 F) Temperature Rating -40 C C 3 Sizes 1, 2, 3, 4 Pole configurations Free floating or Panel Mount Up to 65A Material: Housing: Steatite Clamp: Brass Screws: Zinc Plated Steel E2514 Wire Size (solid / stranded) 22- AWG 22- AWG 18-6 AWG -6 AWG mm2 300 V 300 V 800 VAC/DC 300 V 300 V 800 VAC/DC 300 V 300 V 800 VAC/DC A 30 A 24 A 30 A 40 A 32 A 65 A 76 A 57 A Torque 6 lb-in 6 lb-in 0.4 Nm 6 lb-in 6 lb-in 0.5 Nm 12 lb-in 12 lb-in 1.2 Nm Ceramic Ceramic Ceramic 8 mm 8 mm 8 mm Wire Stripping Length Screwdriver Flat Head 0.5 x 3 mm Flat Head 0.8 x 4 mm Flat Head 0.8 x 4 mm Mounting Hole Size 3.5 mm 3.5 mm 3.5 mm Recommended Mounting Screw M3 x 16 M3 x 16 M3 x 1 pole free floating free floating with mounting holes free floating with mounting holes with mounting holes Weight g 18.0 g 26.1 g 30.1 g 42.3 g - CB4/1 CB4/2 CB4/2H CB4/3 CB4/3H - Weight CB6/1 CB6/2H CB6/3H CB6/4H 13.5 g 27.3 g 42.5 g 29.1 g Weight CB16/2H CB16/3H g 44.6 g - (All dimensions are shown in mm, to convert to inches please divide by 25.4) CB4/1 CB6/ CB4/2H CB6/2H CB6/3H CB16/3H CB6/4H CB4/3H CB4/ CB4/3 CB16/2H mm2 Current Rating 18.5 E2514 Voltage Rating Insulation Material Environments Furnaces Heaters Process Equipment Machinery AWG AWG mm2 APPLICATIONS High Temperature Dimensions E Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

95 OVERVIEW EUROSTRIPS TERMINAL STRIPS SCREW CLAMP CONNECTION TECHNOLOGY Quick and Efficient Wire-to-Wire connection solution Modern Replacement for traditional Double-Row Barrier Style Touch-proof design to eliminate shorts Available in 1s or precut to required number of poles Easy to cut to length by using hacksaw or utility knife Safe, Gas-tight connection Reliable connection utilizing a precision machined tubular screw clamp insert for convenient wire installation and usage E SELECTION GUIDE MATERIAL SPECIFICATIONS Insert HE SERIES with wire protector Current Carrying Metal Corrosion free material Insert: Tinned Brass Screw: Blue chromated steel Wire protector: Stainless Steel Terminal Block Housing Polyamide PA66 Housing Self-extinguishing High mechanical strength Specifications Upper Temperature Limit: 125 C Lower Temperature Limit: -30 C Flammability UL94: V0 Wire Protector HE Series Flat Base 300V page HEH Series Standoff Feet 600V page HE42 Series Pluggable 300V, 600V page 0-1 ATS SERIES with wire protector - Center Barrier MATERIAL SPECIFICATIONS Insert Center Barrier Wire Protector Current Carrying Metal Corrosion free material Insert: Nickel-plated copper alloy Screw: yellow chromated steel Wire protector: Stainless Steel Middle Barrier: Stainless Steel Terminal Block Housing Polyamide PA66 Housing Self-extinguishing High mechanical strength Specifications Upper Temperature Limit: 125 C Lower Temperature Limit: -30 C Flammability UL94: V0 ATS Series Flat Base 300V page 2 ATSF Series Standoff Feet 600V page 3 ACCESSORIES Jumpers, Separation Plates, Marking Pins, Imprinting page 4-5 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

96 EUROSTRIPS TERMINAL STRIPS FLAT BASE PANEL MOUNT 300 V - WIRE PROTECTOR HE1 HE4 HIGHLIGHTS FEATURES 300V up to 63A Cost effective reliable wire-to-wire solution Easy to use double-row terminal strips Panel mount or free float Finger safe metal parts Wire protector easy to cut to required pole configuration Pre cut version in stock Color: white APPLICATIONS HVAC Appliances Equipment Power Distribution Junction Boxes Cost effective alternative to barrier strips Dimensions & Weight Pitch Spacing 8 mm mm Weight per piece (1) 16.2 g 31.6 g Wire Size (solid / stranded) AWG mm 2 Voltage Rating 300 V 400 V Current Rating A 6 A Torque 4.4 lb-in 0.35 Nm Insulation Material /6 V0 Wire Stripping Length 5 mm Mounting Hole Diameter 3.0 mm 3. Terminal Screw Size M2.6 M3 Terminal Strips Length Length 5 pole 6 pole 7 pole 8 pole 9 pole pole 11 pole 1 E HE1WPR/ mm 0 HE1WPR/ mm 0 HE1WPR/ mm 0 HE1WPR/ mm 0 HE1WPR/ mm HE1WPR/ mm HE1WPR/ mm HE1WPR/ mm HE1WPR/ 77.2 mm HE1WPR/ mm HE1WPR/ mm E AWG mm V 400 V 30 A A 7.0 lb-in 0.4 Nm /6 V0 Insert Material Tinned Brass Tinned Brass Terminal Screw Material Blue Chromated Steel Blue Chromated Steel HE4WPR/ mm 0 HE4WPR/ mm 0 HE4WPR/ mm 0 HE4WPR/ mm 0 HE4WPR/ mm HE4WPR/ mm HE4WPR/ mm HE4WPR/ mm HE4WPR/ 96.4 mm HE4WPR/ mm HE4WPR/ mm External Jumpers HCL8-2 0 HCL-2 0 HCL8-3 0 HCL-3 0 HCL8-4 0 HCL HCL HCL Marking Plates Blank BS24E 25 No BS24EM No BS24EM mm HE1 DIMENSIONS M2.6 mm HE4 DIMENSIONS M3 5.2 mm 2.8 mm Ø5 mm Ø3 mm Mounting Hole M mm 3.5 mm Ø3. Mounting Hole 6.4 mm M3 Ø5.7 mm 8.5 mm 2.8 mm 6.5 mm 12.2 mm 3.2 mm 7.9 mm 14.9 mm 8 mm Ø2.8 mm L 16.2 mm mm Ø3.6 L mm (All dimensions are shown in mm, to convert to inches please divide by 25.4) 96 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

97 FLAT BASE PANEL MOUNT 300 V - WIRE PROTECTOR HE6 HE EUROSTRIPS TERMINAL STRIPS HE16 Dimensions & Weight Pitch Spacing Weight per piece (1) 12 mm 47.0 g 15 mm 95.5 g 15 mm 94.5 g Wire Size (solid / stranded) - AWG 4-2 Voltage Rating 300 V 400 V Current Rating 40 A 16 A Torque 7.0 lb-in 0.55 Nm Insulation Material /6 V0 Wire Stripping Length 7 mm 8.5 mm Mounting Hole Diameter 4.2 mm 4.5 mm Terminal Screw Size M3.5 M4 M5 Terminal Strips Length Length Length 5 pole 6 pole 7 pole 8 pole 9 pole pole 11 pole 1 E HE6WPR/ mm 0 HE6WPR/ mm 0 HE6WPR/ mm 0 HE6WPR/ mm 0 HE6WPR/ mm HE6WPR/ mm HE6WPR/ mm HE6WPR/ mm HE6WPR/ mm 25 HE6WPR/ mm 25 HE6WPR/ mm 25 E AWG 6- mm V 400 V A 25 A.6 lb-in 0.84 Nm /6 V0 HEWPR/ mm HEWPR/ mm HEWPR/ mm HEWPR/ mm HEWPR/ mm 25 HEWPR/ mm 25 HEWPR/ mm 25 HEWPR/ mm 25 HEWPR/ mm HEWPR/ mm HEWPR/ mm E AWG V 400 V 63 A 35 A 17.7 lb-in 1.4 Nm /6 V0 Insert Material Tinned Brass Tinned Brass Tinned Brass Terminal Screw Material Blue Chromated Steel Blue Chromated Steel Blue Chromated Steel 8.5 mm 4.5 mm HE16WPR/ mm HE16WPR/ mm HE16WPR/ mm HE16WPR/ mm HE16WPR/ mm 25 HE16WPR/ mm 25 HE16WPR/ mm 25 HE16WPR/ mm 25 HE16WPR/ mm HE16WPR/ mm HE16WPR/ mm External Jumpers HCL HCL HCL HCL HCL HCL HCL HCL Marking Plates Blank BS60E 25 BS16E 25 No BS60EM BS16EM No BS60EM BS16EM HCL HCL HCL HCL BS16E 25 BS16EM BS16EM HE6 DIMENSIONS HE DIMENSIONS HE16 DIMENSIONS 12 mm M mm M4 15 mm M5 7.7 mm 4.3 mm Ø6.3 mm Ø4.2 mm M mm 9.3 mm 5.7 mm Ø8.2 Ø4.5 M mm 5.7 mm 9.3 mm Ø4.5 Ø8.2 M mm 12 mm Ø4.1 mm L 4.0 mm 8.9 mm mm 15 mm L Ø5 mm 4.8 mm mm 21.9 mm 15 mm L Ø mm mm 21.9 mm (All dimensions are shown in mm, to convert to inches please divide by 25.4) Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

98 EUROSTRIPS TERMINAL STRIPS STANDOFF FEET PANEL MOUNT 600 V - WIRE PROTECTOR HE1H HE4HN HIGHLIGHTS FEATURES 600V up to 63A Cost effective reliable wire-to-wire solution Easy to use double-row terminal strips Panel mount or free float Finger safe metal parts Wire protector easy to cut to required pole configuration Pre cut version in stock Color: white APPLICATIONS HVAC Appliances Equipment Power Distribution Junction Boxes Cost effective alternative to barrier strips Dimensions & Weight Pitch Spacing 8 mm mm Weight per piece (1) 17.2 g 33.0 g Wire Size (solid / stranded) AWG mm 2 Voltage Rating 600 V 0 V Current Rating A 6 A Torque 4.4 lb-in 0.35 Nm Insulation Material /6 V0 Wire Stripping Length 5 mm Mounting Hole Diameter 3.0 mm 3. Terminal Screw Size M2.6 M3 Terminal Strips Length Length 5 pole 6 pole 7 pole 8 pole 9 pole pole 11 pole 1 E HE1HWPR/ mm 0 HE1HWPR/ mm 0 HE1HWPR/ mm 0 HE1HWPR/ mm 0 HE1HWPR/ mm HE1HWPR/ mm HE1HWPR/ mm HE1HWPR/ mm HE1HWPR/ 77.2 mm HE1HWPR/ mm HE1HWPR/ mm E AWG mm V 0 V 30 A A 7.0 lb-in 0.4 Nm /6 V0 Insert Material Tinned Brass Tinned Brass Screw Material Blue Chromated Steel Blue Chromated Steel HE4HNWPR/ mm 0 HE4HNWPR/ mm 0 HE4HNWPR/ mm 0 HE4HNWPR/ mm 0 HE4HNWPR/ mm HE4HNWPR/ mm HE4HNWPR/ mm HE4HNWPR/ mm HE4HNWPR/ 96.4 mm HE4HNWPR/ mm HE4HNWPR/ mm External Jumpers HCL8-2 0 HCL-2 0 HCL8-3 0 HCL-3 0 HCL8-4 0 HCL HCL HCL Marking Plates Blank No No Isolation Partition HEP4/6H 5 Mounting Pins H4 8 mm HE1H DIMENSIONS M2.6 mm BS24E 25 BS24EM BS24EM HE4HN DIMENSIONS M3 5.2 mm 2.8 mm Ø5 mm Ø3 mm Mounting Hole M mm 6.4 mm 3.5 mm Ø5.7 mm Ø3.6 Mounting Hole M3 8.5 mm 8 mm L Ø2.8 mm 6..3 mm.1 mm 16.2 mm 1 mm L Ø mm 12.1 mm 14.0 mm mm 19.1 mm (All dimensions are shown in mm, to convert to inches please divide by 25.4) 98 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

99 STANDOFF FEET PANEL MOUNT 600 V - WIRE PROTECTOR EUROSTRIPS TERMINAL STRIPS HE6H HEH HE16H Dimensions & Weight Pitch Spacing Weight per piece (1) 12 mm 49.1 g 15 mm 98.7 g 15 mm 99.3 g Wire Size (solid / stranded) - AWG 4-2 Voltage Rating 600 V 0 V Current Rating 40 A 16 A Torque 7.0 lb-in 0.55 Nm Insulation Material Isolation Partition HEP4/6H 5 Mounting Pins H6 12 mm M3.5 /6 V0 Wire Stripping Length 5 mm Mounting Hole Diameter 4.2 mm 4.5 mm Terminal Screw Size M3.5 M4 M5 Terminal Strips Length Length Length 5 pole 6 pole 7 pole 8 pole 9 pole pole 11 pole 1 E HE6HWPR/ mm 0 HE6HWPR/ mm 0 HE6HWPR/ mm 0 HE6HWPR/ mm 0 HE6HWPR/ mm HE6HWPR/ mm HE6HWPR/ mm HE6HWPR/ mm HE6HWPR/ mm 25 HE6HWPR/ mm 25 HE6HWPR/ mm mm E AWG 6- mm V 0 V A 25 A 7.6 lb-in 0.84 Nm M4 /6 V0 HEHWPR/ mm 40 HEHWPR/ mm 40 HEHWPR/ mm 40 HEHWPR/ mm 40 HEHWPR/ mm HEHWPR/ mm HEHWPR/ mm HEHWPR/ mm HEHWPR/ mm HEHWPR/ mm HEHWPR/ mm 15 mm E AWG V 0 V 63 A 35 A 17.7 lb-in 1.4 Nm /6 V0 Insert Material Tinned Brass Tinned Brass Tinned Brass Terminal Screw Material Blue Chromated Steel Blue Chromated Steel Blue Chromated Steel External Jumpers HCL HCL HCL HCL HCL HCL HCL HCL Marking Plates Blank BS60E 25 No BS60EM No BS60EM mm HE16HWPR/ mm 40 HE16HWPR/ mm 40 HE16HWPR/ mm 40 HE16HWPR/ mm 40 HE16HWPR/ mm HE16HWPR/ mm HE16HWPR/ mm HE16HWPR/ mm HE16HWPR/ mm HE16HWPR/ mm HE16HWPR/ mm M5 HCL HCL HCL HCL HE6H DIMENSIONS HEH DIMENSIONS HE16H DIMENSIONS 7.7 mm 4.3 mm Ø6.3 mm Ø4.2 M mm 9.3 mm 5.7 mm Ø8.2 Ø4.5 M mm 9.3 mm 5.7 mm Ø4.5 Ø8.2 M mm 12 mm L Ø4.1 9 mm 13.9 mm 15.0 mm mm 15 mm L Ø5 mm.7 mm 17.5 mm 25.1 mm 25.1 mm 27.8 mm 15 mm L Ø5..7 mm 17.5 mm mm (All dimensions are shown in mm, to convert to inches please divide by 25.4) 27.8 mm Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

100 EUROSTRIPS TERMINAL STRIPS PLUGGABLE PANEL MOUNT FLAT BASE - 300V HE42ST HE42BU HIGHLIGHTS FEATURES Plug & Socket Cost effective reliable wire-to-wire solution Easy to use double-row terminal strips Panel mount or free float Finger safe metal parts Wire protector easy to cut to required pole configuration Pre cut version in stock 300V / 600V up to 63A Color: white APPLICATIONS HVAC Appliances Equipment Power Distribution Junction Boxes Cost effective alternative to barrier strips Dimensions & Weight Pitch Spacing mm Weight per piece (1) 30.6 g 30.4 g Wire Size (solid / stranded) 24- AWG mm 2 Voltage Rating 300 V 400 V Current Rating A A Torque 7.0 lb-in 0.4 Nm Insulation Material /6 V0 mm Wire Stripping Length 7 mm Mounting Hole Diameter 3.0 mm 3. Terminal Screw Size M2.6 M3 Terminal Strips Length Length 5 pole 6 pole 7 pole 8 pole 9 pole pole 11 pole 1 E HE42ST/ mm 0 HE42ST/ mm 0 HE42ST/ mm 0 HE42ST/ mm 0 HE42ST/ mm HE42ST/ mm HE42ST/ mm HE42ST/ mm HE42ST/ 96.4 mm HE42ST/ mm HE42ST/ mm E AWG mm V 400 V A A 7.0 lb-in 0.4 Nm /6 V0 Insert Material Tinned Brass Tinned Brass Terminal Screw Material Blue Chromated Steel Blue Chromated Steel HE42BU/ mm 0 HE42BU/ mm 0 HE42BU/ mm 0 HE42BU/ mm 0 HE42BU/ mm HE42BU/ mm HE42BU/ mm HE42BU/ mm HE42BU/ 96.4 mm HE42BU/ mm HE42BU/ mm External Jumpers HCL-2 0 HCL-2 0 HCL-3 0 HCL-3 0 HCL-4 0 HCL HCL HCL Marking Plates Blank BS24E 25 No BS24EM No BS24EM HE42ST DIMENSIONS BS24E 25 BS24EM BS24EM HE42BU DIMENSIONS 6.4 mm [0.252 in] 3.65 mm [0.144 in] mm [0.394 in] mm [0.394 in] M3 M3 2. [0.2 in] Ø3 mm [0.118 in] 5.7 mm [0.224 in] mm [0.394 in] M3 3.5 mm [0.140 in] 6.4 mm [0.252 in] Ø3.6 [Ø0.142 in] Mounting Hole Ø5.7 mm [0.224 in] 3.2 mm [0.126 in] M mm [0.305 in] Ø3.5 mm [Ø0.138 in] L mm [0.394 in] 23 mm [0.91 in] 15 mm [0.59 in] mm [0.394 in] Ø3.6 [Ø0.142 in] L 7.9 mm [0.311 in] mm [0.787 in] 14.9 mm [0.587 in] (All dimensions are shown in mm, to convert to inches please divide by 25.4) 0 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

101 PLUGGABLE PANEL MOUNT STANDOFF FEET - 600V HE42SST HE42SBU EUROSTRIPS TERMINAL STRIPS Dimensions & Weight Pitch Spacing mm mm Weight per piece (1) 30.6 g 30.4 g Wire Size (solid / stranded) 24- AWG mm 2 Voltage Rating 600 V 0 V Current Rating A A Torque 7.0 lb-in 0.4 Nm Insulation Material /6 V0 Wire Stripping Length 7 mm Mounting Hole Diameter 3.0 mm 3. Terminal Screw Size M3.5 M4 Terminal Strips Length Length 5 pole 6 pole 7 pole 8 pole 9 pole pole 11 pole 1 E HE42SST/ mm 0 HE42SST/ mm 0 HE42SST/ mm 0 HE42SST/ mm 0 HE42SST/ mm HE42SST/ mm HE42SST/ mm HE42SST/ mm HE42SST/ 96.4 mm HE42SST/ mm HE42SST/ mm E AWG mm V 0 V A A 7.0 lb-in 0.4 Nm /6 V0 Insert Material Tinned Brass Tinned Brass Terminal Screw Material Blue Chromated Steel Blue Chromated Steel HE42SBU/ mm 0 HE42SBU/ mm 0 HE42SBU/ mm 0 HE42SBU/ mm 0 HE42SBU/ mm HE42SBU/ mm HE42SBU/ mm HE42SBU/ mm HE42SBU/ 96.4 mm HE42SBU/ mm HE42SBU/ mm External Jumpers HCL-2 0 HCL-2 0 HCL-3 0 HCL-3 0 HCL-4 0 HCL HCL HCL Marking Plates Blank BS24E 25 BS24E 25 No BS24EM BS24EM No BS24EM BS24EM HE42SST DIMENSIONS HE42SBU DIMENSIONS 6.4 mm [0.252 in] 3.65 mm [0.144 in] mm [0.394 in] mm [0.394 in M3 2. [0.2 in] Ø3 mm [0.118 in] mm [0.394 in] 5.7 mm [0.224 in] M3 M3 3.5 mm [0.140 in] 6.4 mm [0.252 in] Ø3.6 [Ø0.142 in] Mounting Hole Ø5.7 mm [0.224 in 6.7 mm [0.264 in] M mm [0.453 in] 18.5 mm [0.728 in] 12.1 mm [0.477 in] 19.1 mm [0.752 in] Ø3.5 mm [Ø0.138 in] L mm [0.394 in] 23 mm [0.91 in] mm [0.394 in Ø3.6 [Ø0.142 in] L 14.0 mm [0.551 in] mm [0.787 in] (All dimensions are shown in mm, to convert to inches please divide by 25.4) Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

102 EUROSTRIPS TERMINAL STRIPS TERMINAL STRIP 300V - CENTER BARRIER / WIRE PROTECTOR ATS1.5 ATS2.5 ATS6 HIGHLIGHTS FEATURES Center Barrier / Wire Protector 300V/600V up to 63A Cost effective reliable wire-to-wire solution Easy to use double-row terminal strips Panel mount or free float Finger safe metal parts Wire protector easy to cut to required pole configuration Pre cut version in stock Color: translucent white APPLICATIONS HVAC Appliances Equipment Power Distribution Junction Boxes Cost effective alternative to barrier strips Center Barrier Wire Protector Dimensions & Weight Pitch Spacing 8 mm mm Weight per piece (1) 22 g 34 g Insulation Material Polyamide 6.6 Polyamide 6.6 Polyamide pole 6 pole 7 pole 8 pole 9 pole pole 11 pole 1 Wire Stripping Length 5 mm (0.2 in.) (0.24 in.) 7 mm (0.28 in.) Mounting Hole Diameter 2.8 mm 3.5 mm 4.4 mm Terminal Screw Size M2.5 M3 M ATS1.5/ ATS1.5/ mm ATS1.5/ mm ATS1.5/ mm ATS1.5/ mm ATS1.5/ mm ATS1.5/ mm ATS1.5/ mm 40.0 ATS1.5/ 77.2 mm ATS1.5/ mm ATS1.5/ mm 40.2 ATS1.5/ mm ATS1.5/ mm ATS1.5/ mm ATS1.5/ mm ATS1.5/ mm 40.7 ATS1.5/ mm 40.8 ATS1.5/ mm 40.9 ATS1.5/ mm 40.2 ATS1.5/ 97.0 mm ATS1.5/ mm ATS1.5/ mm 12 mm 44 g ATS1.5/2.0 mm ATS1.5/ mm ATS1.5/ mm ATS1.5/ mm ATS1.5/ mm ATS1.5/ mm ATS1.5/ mm ATS1.5/9 4.0 mm 40.4 ATS1.5/ mm ATS1.5/ mm ATS1.5/ mm External Jumpers HCL8-2 0 HCL-2 0 HCL HCL8-3 0 HCL-3 0 HCL HCL8-4 0 HCL-4 0 HCL HCL HCL HCL Marking Plates E E Wire Size (solid / stranded) AWG AWG mm AWG AWG mm 2 Voltage Rating 300 V 300 V 400 V 300 V 300 V 400 V Current Rating A 15 A 15 A 30 A 30 A 26 A Torque 4.4 lb-in 0.5 Nm 5.3 lb-in 0.5 Nm Insert Material Nickel Plated Copper Alloy Nickel Plated Copper Alloy Terminal Screw Material Zinc Yellow Chromated Steel Zinc Yellow Chromated Steel BS24E 25 BS24EM BS24EM E AWG 18- AWG V 300 V 400 V 40 A 40 A 44 A 7 lb-in 0.5 Nm Nickel Plated Copper Alloy Zinc Yellow Chromated Steel Type L (mm) Pk. Type L (mm) Pk. Type L (mm) Pk. BS60E 25 BS60EM BS60EM ATS1.5 DIMENSIONS 8 mm M2.5 mm ATS2.5 DIMENSIONS M mm ATS6 DIMENSIONS M mm Ø2.8 mm Mounting Hole 6.4 mm 3.5 mm Ø3.5 mm Mounting Hole mm Ø4.4 mm Ø5.4 mm M mm Ø5.7 mm M3 9.5 mm Ø6.8 mm M mm 8 mm Ø3 mm L 2.5 mm 6.7 mm 18.2 mm 13.7 mm mm L Ø mm 8.0 mm 21.8 mm 15.5 mm 12 mm Ø4.2 mm L 4.3 mm 9.0 mm 23.0 mm 17.7 mm (All dimensions are shown in mm, to convert to inches please divide by 25.4) 2 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

103 7.4 mm 12 mm 19.4 mm TERMINAL STRIP 600V - CENTER BARRIER / WIRE PROTECTOR EUROSTRIPS ATSF1.5 ATSF2.5 ATSF6 ATSF16 Dimensions & Weight Pitch Spacing 8 mm mm Weight per piece (1) 30 g 36 g 12 mm g 15 mm 98 g Wire Size (solid / stranded) Voltage Rating Current Rating Torque Insulation Material Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 Wire Stripping Length 5 mm (0.2 in.) (0.24 in.) Mounting Hole Diameter 2.8 mm 3.5 mm 5 pole 6 pole 7 pole 8 pole 9 pole pole 11 pole 1 Type L (mm) Pk ATSF1.5/ ATSF1.5/ ATSF1.5/ ATSF1.5/ ATSF1.5/ ATSF1.5/ ATSF1.5/ ATSF1.5/ ATSF1.5/ ATSF1.5/ ATSF1.5/ Type L (mm) Pk ATSF2.5/ ATSF2.5/ ATSF2.5/ ATSF2.5/ ATSF2.5/ ATSF2.5/ ATSF2.5/ ATSF2.5/ ATSF2.5/ ATSF2.5/ ATSF2.5/ mm (0.28 in.) 4.4 mm Type L (mm) Pk ATSF6/ ATSF6/ ATSF6/ ATSF6/ ATSF6/ ATSF6/ ATSF6/ ATSF6/ ATSF6/ ATSF6/ ATSF6/ Polyamide 6.6 Terminal Screw Size M2.5 M3 M3.5 M5 External Jumpers HCL8-2 0 HCL-2 0 HCL HCL8-3 0 HCL-3 0 HCL HCL8-4 0 HCL-4 0 HCL HCL HCL HCL Isolation Partition HEP4/6H 5 HEP4/6H 5 Mounting Pins H4 H6 Marking Plates 8 mm M2.5 E mm AWG AWG mm V 600 V 400 V A 15 A 15 A 4.4 lb-in 0.5 Nm M3 E AWG AWG mm V 600 V 400 V 30 A 30 A 26 A 5.3 lb-in 0.6 Nm Insert Material Nickel Plated Copper Alloy Nickel Plated Copper Alloy Terminal Screw Material Zinc Yellow Chromated Steel Zinc Yellow Chromated Steel BS24E 25 BS24EM BS24EM mm BS60E 25 BS60EM BS60EM M mm Type L (mm) Pk ATSF16/ ATSF16/ ATSF16/ ATSF16/ ATSF16/ ATSF16/ ATSF16/ ATSF16/ ATSF16/ ATSF16/ ATSF16/ mm (0.32 in.) 4.2 mm M5 HCL HCL HCL HCL BS16E 25 BS16EM BS16EM ATSF1.5 DIMENSIONS ATSF2.5 DIMENSIONS ATSF6 DIMENSIONS ATSF16 DIMENSIONS E AWG 18- AWG V 600 V 400 V 40 A 40 A 44 A 7 lb-in 0.8 Nm Nickel Plated Copper Alloy Zinc Yellow Chromated Steel E AWG 18-6 AWG V 600 V 800 V 63 A 65 A 82 A lb-in 2.25 Nm Nickel Plated Copper Alloy Zinc Yellow Chromated Steel mm Ø2.8 mm Mounting Hole Ø5.35 mm M mm 6.4 mm 3.5 mm Ø5.7 mm Ø3.5 mm Mounting Hole M3 9.5 mm mm Ø6.8 mm Ø4.4 mm M mm Ø8 mm Ø4.2 mm M5 11 mm 8 mm L Ø3 mm 6.1 mm.1 mm 12 mm 18.2 mm 17 mm mm L Ø3. 14 mm 22.3 mm 12 mm L Ø4.2 mm 8.5 mm 12.5 mm 15.8 mm 23.0 mm.9 mm 15.1 mm Ø L.4 mm 16.5 mm 15.1 mm 26.3 mm 25.8 mm (All dimensions are shown in mm, to convert to inches please divide (All by dimensions 25.4) are shown in mm, to convert to inches please divide by 25.4) Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

104 EUROSTRIPS TERMINAL STRIPS ACCESSORIES HIGHLIGHTS EXTERNAL JUMPERS EXTERNAL JUMPERS Bus potential between poles on terminal Strips Eliminates Wire Jumpers Less wiring Time Material: Copper Alloy nickel plated (pins) (Insulation) Color: Black ISOLATION PARTITION Separation between adjectant poles of different potentials Visual separation of poles Better circuit Identification Increasing wiring efficiency Material: Color: black Technical Information External Jumper Eurostrip Pole Spacing Ordering Information 1 2 mm 4 mm 1 4 mm HCL8 HE1, HE1H 8 mm (0.315 in.) HCL mm 0 HCL8-3 mm 0 HCL mm 0 HCL mm 25 3 mm HCL HE4, HE4HN mm (0.394 in.) HCL-2 15 mm 0 HCL-3 25 mm 0 HCL-4 35 mm 0 HCL mm 25 HCL12 HE6, HE6H 12 mm (0.472 in.) HCL15 HE, HE16, HEH, HE16H 15 mm (0.591 in.) Length Length Length Length 1 3 mm 5 mm 5 mm L 6.5 mm 3 mm 1 3 mm HCL mm 0 HCL mm 0 HCL mm 0 HCL mm 25 L 6.5 mm 3 mm 17 mm HCL15-2 mm 0 HCL mm 0 HCL15-4 mm 0 HCL mm 25 HCL8 HCL HCL12 HCL15 3 mm 9 mm L 8 mm 3 mm L ISOLATION PARTITIONS For Eurostrip HE4HN, HE6H, TSF2.5, TSF6 Dimensions HEP4/16H 27 x 18.5 x 3.4 mm 5 (All dimensions are shown in mm, to convert to inches please divide by 25.4) 4 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

105 ACCESSORIES EUROSTRIPS MOUNTING PINS HIGHLIGHTS Technical Information Mounting Pins H4 H6 Eurostrip Type HE4HN HE6H Panel Thickness mm mm Drill Hole Size Ø4.2 mm Ø5.2mm Ordering Information H4 H6 MOUNTING PINS Faster Panel Mounting with snap-on mounting pins Installation 1) Insert Pin through drilled hole 2) Position Eurostrip on mounting pin 3) Snap Eurostrip onto Mounting Pins Use 2 or more pins per Eurostrip Material: Polycarbonate 21 mm 12. Ø 4.2 mm 8.5 mm MARKING PLATES 24 mm 14.7 mm Ø 5.2 mm 11 mm MARKING PLATES Install Mounting Plate under or on top of Eurostrip Easy identification of individual pole positions for more wiring efficiency Less installation time Blank marking plates for hand-marking Imprinted Marking Plates (No. 1-12, 13-24) Material: PVC Color: white with black imprint Dimensions & Weight Eurostrip Type Ordering Information Blank HE4, HE4HN BS24E 25 BS24EM BS24EM HE6, HE6H BS60E 25 BS60EM BS60EM HE, HEH, HE16, HE16H BS16E 25 BS16EM BS16EM Imprinting Mark individual pole positions Marking saves installation Time Marking on turret location Consecutive, identical or custom imprints Specify imprinting in part# Imprint: black ink, rub-resistant 0pcs MOQ IMPRINTING Imprint Example Order Examples Ordering Information Consecutive 1-6 Consecutive 8-1 Identical HEHWPR/06/1-6 0 HE1WPR/08/8-1 0 HE6WPR/12/1 0 HEHWPR/06/1-6 For custom imprints please contact Altech. (All dimensions are shown in mm, to convert to inches please divide by 25.4) Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

106 ACCESSORIES DIN RAIL & MOUNTING DIN RAIL HIGHLIGHTS DIN35 x 7.5 DIN35 x 15 FEATURES Altech DIN Rails comply with DIN EN60715, EN022, EN035, EN045 standards Easy mounting of terminal blocks, power supplies and other control components and devices into panel Space saving Reduces labor 35mm, 32mm and 15mm versions 1m and 2m standard length Custom length available Perforated, unperforated MATERIAL Zinc-plated steel 35x7.5mm 35x15mm 32mm 15mm Aluminum 35x7.5mm Stainless Steel (Type AISI 304) 35x7.5mm 35 mm x 7.5 mm deep Zinc Plated Steel Type Length Perforated m 25111/1M 1m Unperforated m 25111/1M 1m Stainless Steel Type Length Perforated m /1M 1m Unperforated m /1M 1m Aluminum Type Length Perforated m /1M 1m Unperforated m /1M 1m 35 mm x 15 mm deep Zinc Plated Steel Type Length Perforated CA701-15/S-2M 2m CA701-15/S 1m Unperforated CA M 2m CA m Dimensions Preforated Steel and Stainless 18 Preforated Steel 18 Preforated Aluminum Unpreforated Steel Unpreforated 6 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

107 DIN RAIL ACCESSORIES DIN RAIL & MOUNTING DIN32 DIN15 32 mm x 15 mm deep Zinc Plated Steel Type Length Perforated m /1M 1m Unperforated m 25111/1M 1m 15 mm x 5.5 mm deep Zinc Plated Steel Type Length Perforated CA601/S 1m Dimensions Preforated Steel Preforated Steel 18 Unpreforated Steel Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

108 ACCESSORIES DIN RAIL & MOUNTING MOUNTING ACCESSORIES HIGHLIGHTS SUPPORT BRACKETS Elevate DIN Rail away from panel Easier mounting of components Suitable for all mounting rails Increase wiring access 45 version for improved visibility Straight brackets available in 3 heights: MOUNTING Brackets mount with 2 screws to any panel or flat surface Tapped center hole for DIN Rail mounting SUPPORT BRACKETS CA603 48mm (1.89in) M6 60mm (2.36in) 74mm (2.91in) Ø7mm (.28in) CA UNIVERSAL DIN CLIPS D35CLIP 18mm (.71in) Ø6mm (.24 in.) M6 52mm(2.05 in.) 74mm(2.98 in.) 18mm(.71in.) Height CA703 1 in. 25 CA803 2 in. 25 CA903 3 in. 25 CMTB35 TSTW H Slot 6x15mm (.24x.59 in.) CA902 MATERIAL Zinc-plated yellow chromated Steel UNIVERSAL DIN CLIPS Clips on to any 35mm/32mm DIN Rail Flexible mounting solution Mount any component on 32mm/35mm DIN Rail Various mounting hole solutions Material: zinc-plated steel, Mounting Hole D35CLIP-M4 M4 0 D35CLIP-M5 M5 0 SPACER CASP Ø 5.5 x 2 58 Ø 4.3 x 4 18 Mounting Hole CMTB35 2x4.4 mm 2x5.5 mm CDL4U SPACER CA902 0 SPACER Increases creepage and clearance distance between terminal blocks Segregate different groups of terminal blocks WARNING LABELS Mounted on top of terminal block for visual identification Make entire terminal block assembly shock-proof Dimensions CASP 29 x 43 x 8 mm WARNING LABELS Dimensions CDL4USP 54 x 55.5 x Pack Strips Tags WLX2.5 CX2.5 Series, CXDL2.5, CXK2.5, CXM WLX4 CX4 Series, CXF Series, CXK4 1 0 WLX6 CX6 Series, CXDB Series 1 0 WLX CX Series 1 0 SWL4 CTS4U-N, CDB4, CMDB4 1 0 SWL CTS6U, CDB6U, CMDB Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

109 END STOPS ACCESSORIES END STOPS Selection Table DIN Rail Type CA2 CA2 CA702 CA802 CA3 CA602 CA302 CA402 CA2 35x7.5mm DIN Rail 35x15mm DIN Rail 32mm DIN Rail 15mm DIN Rail POLYAMIDE 66 CA702 CA802 CA2 HIGHLIGHTS MOUNTING PINS End Stops prevent Terminal Blocks and other DIN Rail components from moving on the rail Versions for 35x7.5mm Rail 35x15mm Rail 32mm Rail 15mm Rail Heavy Duty End stop CA2, CA2 Screwless End Stop CA3 (snap on) Material: Polyamide Steel Heavy Duty End Stop Dimensions CA x 44 x 9mm CA2 Dimensions CA x 45 x 8mm CA3 Dimensions CA x x 9.5mm CA602 Dimensions CA2 46 x x 9mm Screwless Snap-On Dimensions CA3 41 x 35 x 6mm Dimensions CA602 x 28 x 8mm STEEL CA302 CA402 CA2 Dimensions CA x 39.5 x 16mm Dimensions CA x 39.5 x 16mm Dimensions CA2 25 x 22.5 x 11.5mm Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

110 ACCESSORIES MARKING GROUP MARKERS HIGHLIGHTS FEATURES Group identification Holders fit standard MT8 marking tags GMH6, GMH7 mounted directly on DIN Rail GMH1, GMH2, GMH3, GMH4, GMH5, GMH8 mounted on End Stops MT1G, MT2G, can be used with all these holders or can be directly mounted on all end stops Material: DIN RAIL MOUNT GMH6 Dimensions GMH x 44.5 x 9.5mm GMH7 Dimensions GMH x 44.5 x 19.5mm MOUNT ON END STOP GMH1 GMH4 GMH5 Suitable for CA602 Suitable for CA802 Suitable for CA702 Dimensions GMH x 14.6 x 8mm 0 Dimensions GMH x 14 x 8mm 0 Dimensions GMH x 14 x 8mm 0 GMH2 / GMH3 GMH8 / GMH8N MTG1 / MTG2 Suitable for CA702 (GMH2) CA802 (GMH3) Suitable for CA3 Mountable on all End Clamps Dimensions GMH x 14 x 8mm 0 GMH3 23 x 14 x 8mm 0 Dimensions GMH x 31. x mm 0 GMH8N x 31. x 6mm 0 Dimensions MTG1 4.3 x 34 x 17.8mm MTG2 4.3 x 34 x 8mm Suitable for CXDL Series TM5 Dimensions TM5 38 x 17 x 5mm 1 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

111 MARKING TAGS Cost Effective MT marking system for quick and accurate identification Push-On Tags fit all Altech DIN Rail mount terminal blocks Inserted individually or as strips of Quick and easy marking ACCESSORIES MARKING Blank Marking Tags for customer marking Order with horizontal/ vertical imprint Standard imprints with consecutive or identical numbers/ characters Custom imprint with short lead time Supplied in packs of 0 tags/ strips BLANK MARKING TAGS Cat No./ Standard Packs Dimensions Type Pack Strips Tags H W MT mm 5.8mm MT mm.0mm MT mm 4.8mm MT mm 4.5mm MT mm 5.6mm MT mm 7.5mm MT mm 8.7mm MT 1 0.4mm 9.5mm MT mm 11.4mm MT mm 15.4mm MT2G mm 5.0mm MT2B mm 9.1mm Continuous Tags MT6F 1 9.5mm 60.0mm MT9F 1.3mm 90.0mm H W Blank Marking Tag Horizontal Imprint Vertical Imprint HOW TO ORDER IMPRINTED MARKING TAGS IMPRINT EXAMPLES FOR MT6 HORIZONTAL VERTICAL Imprint 1 MT6/H-1 2 MT6/H-2 3 MT6/H-3 4 MT6/H-4 5 MT6/H-5 6 MT6/H-6 7 MT6/H-7 8 MT6/H-8 9 MT6/H-9 MT6/H- 1- MT6/H MT6/H MT6/H MT6/H MT6/H MT6/H MT6/H MT6/H MT6/H MT6/H MT6/H MT6/H MT6/H Imprint MT6/H MT6/H MT6/H MT6/H MT6/H MT6/H MT6/H MT6/H MT6/H-1- A MT6/H-A B MT6/H-B C MT6/H-C L1 MT6/H-L1 L2 MT6/H-L2 L3 MT6/H-L3 N MT6/H-N R MT6/H-R S MT6/H-S X MT6/H-X Y MT6/H-Y Z MT6/H-Y Ground Symbol MT6/H-GRND Imprint 1 MT6/V-1 2 MT6/V-2 3 MT6/V-3 4 MT6/V-4 5 MT6/V-5 6 MT6/V-6 7 MT6/V-7 8 MT6/V-8 9 MT6/V-9 MT6/V- 1- MT6/V MT6/V MT6/V MT6/V MT6/V MT6/V MT6/V MT6/V MT6/V MT6/V MT6/V MT6/V MT6/V Imprint MT6/V MT6/V MT6/V MT6/V MT6/V MT6/V MT6/V MT6/V MT6/V-1- A MT6/V-A B MT6/V-B C MT6/V-C L1 MT6/V-L1 L2 MT6/V-L2 L3 MT6/V-L3 N MT6/V-N R MT6/V-R S MT6/V-S X MT6/V-X Y MT6/V-Y Z MT6/V-Y Ground Symbol MT6/V-GRND Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

112 ACCESSORIES PLOTTERS & ENGRAVERS MARKING SYSTEMS 112 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

113 MARKING SYSTEMS ACCESSORIES PLOTTERS PLOTTERS The Altech VP Series base unit is an auxiliary plotter that has to be connected to a PC via a USB connection. It is a high speed plotting device and enables plotting of different markers in one setting. The base unit is controlled through a PC with the help of Vario Sign software (sold separately). Manual available in English and Spanish. The special design of the VP Series enables it to hold different markers from various manufacturers at the same time. It is also possible to write on relatively large markers with a maximum height of.5 mm. PLOTTER VP 600 BASIC PLOTTER VP 600 A3 Ordering Information Cat No Professionally marking of connectors, wires, cables, equipment, cable ties, shrink tubing, labels and signs of different sizes and materials, as well as customerspecific items. Manual insertion of plotter pen Auto calibration Universal Power Supply 0-240V AC Control language HPGL Universal marking software (VarioSign) sold separately Marking area 273 x 305 mm Size: 18.5 x 18.9 x 6.1 in. (470 x 480 x 155 mm) Weight: 13.9 lbs. Ordering Information Cat No Basic features of plotter VP 600 Basic plus: Integrated and automated pen station. Holds 4 different pens at the same time, for fast and frequently changing applications. Built-in pen priming function Automatic recognition system for marking fixture / plates ensures faster and easier handing of frequently changing marking applications. Wide marking area 422 x 305 mm Size: 27.2 x 18.9 x 6.1 in. (690 x 480 x 155 mm) Weight: 18.3 lbs. ACCESSORIES PLOTTER PENS ALTECH FIXTURES SOFTWARE VARIOSIGN Description Tip Size Etching Plotter Pen (red) 0.18 mm Etching Plotter Pen (white) 0.25 mm Etching Plotter Pen (yellow) 0.35 mm Non-Etching Plotter Pen (red) 0.18 mm Non-Etching Plotter Pen (white) 0.25 mm Non-Etching Plotter Pen (yellow) 0.35 mm Description MT2G MT2, MT3, MT4, MT2B MT5, MT6, MT8, MT, MT12, MT MT MTG1, MTG2 * Fixtures for other Terminal Block Manufactures are available, please contact Altech for additional information. Description Variosign Software Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

114 FERRULES INTRODUCTION Ferrules insure reliable electrical connections when terminating stranded flexible wire in terminal blocks, circuit breakers or other control devices. Using ferrules offers several advantages: ELIMINATE CROSS SHORTING caused by unraveled stray wire strands. IMPROVE TERMINAL CONNECTIONS and reduce resistance by providing a solid surface at the point of connection. REDUCE INSTALLATION TIME by eliminating the need to dress loose wire strands and facilitating wire insertion into the terminal clamp. PREVENT CONDUCTOR BREAKAGE due to bending, wire stress or vibration. 114 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

115 Recommended Installation Procedure FERRULES Cutting and stripping the wire The wire should be cut as squarely and evenly as possible, taking care to avoid angular cuts or damage to the conductor. The strip length of the insulation will depend on the barrel length of the ferrule and the outside diameter of the wire. Ideally the wire insulation should be stripped to a length that allows the conductor end to reach flush to the tip of the ferrule, when inserted. The end of the conductor should not extend more than.5mm past the tip of the ferrule. <.5 mm After the insulation is stripped, the strands of the conductor should be dressed by slightly twisting them to insure that any stray strands are consolidated. The wire can then be inserted into the ferrule. The wire should be pushed in so that the insulation edge is fully covered by the plastic collar. The conductor should completely fill the metal tube and can extend up to.5mm past the tip. The ferrule and wire should be crimped with an appropriately sized ratcheted crimper. The ferrule should be inserted into the crimper die set and positioned so that only the metal tube is crimped. The crimping tool should be cycled completely to insure proper application. The finished installation should then be checked for any obvious flaws in processing. An occasional pull test should be preformed to check that the crimp tool is functioning properly. Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

116 FERRULES HIGHLIGHTS FEATURES Ferrules insure reliable electrical connections when terminating stranded flexible wire in terminal blocks, circuit breakers or other control devices. Insulated ferrules prevent conductor breakage due to bending, wire stress or vibration while facilitating wire insertion into the terminal clamp. Altech s UL insulated ferrules are color coded by conductor size for convenient identification. To ensure efficient ferrule crimping, always select the smallest ferrule diameter that fits the wire and use only professional crimping tools. In order meet the UL requirements only matching UL crimpers should be use. Standard Packaging AWG mm 2 L 2 Barrel Length (mm) UL RECOGNIZED SINGLE INSULATED FERRULES Industry Standard DIN Standard color color grey FII grey FII light blue FII light blue FII light blue FII turquoise FII turquoise FII turquoise FII orange FII06 white FID orange FII08 white FID orange FII white FID orange FII12 white FID white FII1806W grey FID1806GR white FII1808W grey FID1808GR white FII18W grey FID18GR white FII1812W grey FID1812GR yellow FII1806Y red FID1806R yellow FII1808Y red FID1808R yellow FII18Y red FID18R yellow FII1812Y red FID1812R red FII1606 black FID red FII1608 black FID red FII16 black FID red FII1612 black FID red FII1618 black FID yellow FII1408Y blue FID blue FID blue FID blue FID blue FID grey FID grey FID grey FID grey FID black FII12 yellow FID black FII18 yellow FID ivory FII0812 red FID ivory FII0818 red FID green FII0612 blue FID green FII0618 blue FID brown FII0416 yellow FID brown FII0418 yellow FID brown FII0422 yellow FID beige FII0216 red FID beige FII0218 red FID beige FII0225 red FID olive FII01 blue FID olive FII0125 blue FID olive FII0130 blue FID Smaller Package Sizes L 1 L 2 Dimensions (mm) D 1 S 1 D 2 S 2 Std. Pack D 2 S 2 L 1 L 2 D 1 S FII0812M FID0812M Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

117 UL RECOGNIZED TWIN INSULATED FERRULES FERRULES Standard Packaging HIGHLIGHTS FEATURES Ferrules insure reliable electrical connections when terminating stranded flexible wire in terminal blocks, circuit breakers or other control devices. Insulated ferrules prevent conductor breakage due to bending, wire stress or vibration while facilitating wire insertion into the terminal clamp. Altech s UL insulated ferrules are color coded by conductor size for convenient identification. Smaller Package Sizes To ensure efficient ferrule crimping, always select the smallest ferrule diameter that fits the wire and use only professional crimping tools. In order meet the UL requirements only matching UL crimpers should be use. A B D L 2 L 1 S 1 S 2 Pull-Out Force Minimum Values for DIN Minimum values of pull-out forces for FERRULES according to DIN EN :08, DIN EN :00 and DIN EN :04 Conductor AWG kcmil kcmil kcmil kcmil kcmil Cross Section mm² 0, 0,34 0, 0,75 1,0 1,5 2,5 4,0 6, Pull Out Force N Pull-Out Force Minimum Values for UL486F Conductor AWG Cross Section mm² 0, 0,34 0, 0,75 1,0 1,5 2,5 4,0 6, Pull Out Force N Pounds Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

118 FERRULES CRIMPERS FOR UL FERRULES These crimpers are specifically designed for use with ferrules and have been tested with our UL Recognized ferrules to insure proper termination. In order to meet the UL requires, the correct sized crimper from this range should be used. Crimpit F 4 Crimping tool for ferrules (according to DIN part 1 and 4) with or without plastic collars. Only one crimping profile for the entire cross-section range. Ferrules: 0,5 4 mm 2 ( 12 AWG) Twin Ferrules: 2 x x 2.5 mm 2 (2 x 2 x 14 AWG) : Crimpit F 4 Weight 448 g Crimpit F 6 Auto Crimping tool for ferrules (according to DIN part 1 and 4) with and without plastic collars. Feeding from front. Ferrules: 0,5 2 ( AWG) Twin Ferrules: 2 x x 2.5 mm 2 (2 x 2 x 14 AWG) : Crimpit F 6 Auto Weight 426 g Crimpit F 6 Gyra Crimping tool for ferrules (according to DIN part 1 and 4) with and without plastic collars. Rotatable crimp die for feeding from the front or the side. Ferrules: 0,14 2 (26 AWG) Twin Ferrules: 2 x x 4 mm 2 (2 x 2 x 12 AWG) : Crimpit F 6 Gyra Weight 428 g Crimpit F 6 EN Crimping tool for ferrules (according to DIN part 1 and 4) with and without plastic collars. Crimp conforms to EN Five crimping profiles for the rated conductor cross-sections. Registration in accordance with VG (Military designation VG T 14 A 0001). Ferrules: (24 AWG) Twin Ferrules: 2 x x 4 mm 2 (2 x 18 2 x 12 AWG) : Crimpit F 6 EN Weight 423 g Crimpit F 6 L Crimping tool for ferrules (conforming to DIN part 1 and 2) with and without insulating collar. Five crimping profiles depending on the wire cross-sections. Ferrules: ( AWG) Twin Ferrules: 2 x x 4 mm 2 (2 x 18 2 x 12 AWG) : Crimpit F 6 L Weight 335 g 118 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

119 CRIMPERS FOR UL FERRULES FERRULES Crimpit F 16 Crimping tool for ferrules (according to DIN part 1 and 4) with and without plastic collars. Crimp conforms to EN Three crimping profiles for the rated conductor cross-sections. Registration in accordance with VG (Military designation VG T 14 A 0002). Ferrules: ( 6 AWG) : Crimpit F 16 Weight 418 g Crimpit F 16 L Crimping tool for ferrules (according to DIN part 1 and 4) with and without plastic collars. Crimp conforms to EN Three crimping profiles for the rated conductor cross-sections. Ferrules: ( 6 AWG) : Crimpit F 16 L Weight 380 g Crimpit F 25 L Crimping tool for ferrules (according to DIN part 1 and 4) as well as for twin ferrules. Ferrules: 6 25 mm 2 ( 4 AWG) Twin Ferrules: 2 x 4 2 x mm 2 (2 x 12 2 x 8 AWG) : Crimpit F 25 L Weight 540 g Crimper Selection Guide Crimpit F L Crimping tool for ferrules (according to DIN part 1 and 4) as well as for twin ferrules. Ferrules: 35 mm 2 (2 1 AWG) Twin Ferrules: 2 x 1 2 (2 x 6 AWG) : Crimpit F L Weight 540 g Single Wire Dual Wire Crimpit Crimpit Crimpit Crimpit Crimpit Crimpit Crimpit Crimpit F4 F6 Gyra F6 EN F6 Auto F6L F16/F16L F25L FL AWG mm² AWG mm² x 22 2 x x 2 x x 18 2 x x 16 2 x x 14 2 x x 12 2 x x 8 2 x x 6 2 x Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

120 FERRULES CRIMPIT F MULTI AND CRIMPING MACHINES Cutter, Stripper and Crimper This one tool will cut and strip the wires and uses belt feed ferrules for fast and easy installation. Crimpit F Multi Multi-function tool. Stripping and cutting of wires. Crimping tool for insulated belt-strip ferrules according to DIN Cross-section: mm 2 ( 14 AWG) Ferrules: 0.5 x 2.5 mm 2 ( x 14 AWG) : Crimpit F Multi Weight 0 g UL Recognized Insulated Belt Strip Ferrules AWG mm 2 Barrel Length (mm) Industry Standard DIN Standard color color Std. Pack orange FII08B white FID08B x white FII1808WB grey FID1808GRB x yellow FII1808YB red FID1808RB x red FII1608B black FID1608B x blue FID1408B x AUTOMATED FERRULE CRIMPING MACHINES For technical and ordering information regarding Ferrule Crimping Machines please contact Altech. 1 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

121 ORIGINAL INDUSTRY STANDARD FERRULES FERRULES Original Industry Standard Ferrules HIGHLIGHTS 2672 C Tested According To: CSA Std C22.2 No Wire Connectors CSA Std C22.2 No. 188-M Splicing Wire and Cable Connectors ANSI/UL Std No. 486A - Wire Connectors and Soldering Lugs for Use with Copper Conductors ANSI/UL Std No. 486C - Splicing Wire Connectors Cat. Barrel Length (B) Ferrule Dimensions mm Std. AWG mm 2 Color No. mm A B C D Pack* Lt. Blue / Lt. Blue / Turquoise / Turquoise /0 0.5 Orange /0 0.5 Orange / White / White / Yellow / Yellow / Red / Red / Red / Blue / Blue / Blue / Gray / Gray / Gray Black Black Ivory Ivory Green Green Brown Brown Beige Beige Olive /0 70 Yellow /0 95 Red /0 1 Blue MCM 1 Yellow FEATURES Ferrules insure reliable electrical connections when terminating stranded flexible wire in terminal blocks, circuit breakers or other control devices. Insulated ferrules prevent conductor breakage due to bending, wire stress or vibration while facilitating wire insertion into the terminal clamp. Altech s standard insulated ferrules are color coded by conductor size for convenient identification. To ensure efficient ferrule crimping, always select the smallest ferrule diameter that fits the wire and use only professional crimping tools. Sleeve: polypropylene Tube: tin-plated copper CRIMPER SELECTOR GUIDE page 18 * Different standard packs are available as shown. To order the desired standard pack, please use the quantity required as a suffix to the cat. no. Example for 0 standard pack: 26.0/0 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

122 FERRULES ORIGINAL DIN STANDARD FERRULES HIGHLIGHTS Original DIN Standard Ferrules FEATURES Ferrules insure reliable electrical connections when terminating stranded flexible wire in terminal blocks, circuit breakers or other control devices Tested According To: CSA Std C22.2 No Wire Connectors CSA Std C22.2 No. 188-M Splicing Wire and Cable Connectors ANSI/UL Std No. 486A - Wire Connectors and Soldering Lugs for Use with Copper Conductors ANSI/UL Std No. 486C - Splicing Wire Connectors Insulated ferrules prevent conductor breakage due to bending, wire stress or vibration while facilitating wire insertion into the terminal clamp. Altech s DIN standard ferrules are in compliance with DIN requirements, making them ideal for export applications. They also have a specified color code convention that differs from the color code used for Altech s industry standard ferrules. To ensure efficient ferrule crimping, always select the smallest ferrule diameter that fits the wire and use only professional crimping tools. Sleeve: polypropylene Tube: tin plated copper CRIMPER SELECTOR GUIDE page 18 Cat. Barrel Length (B) Ferrule Dimensions mm Std. AWG mm 2 Color No. mm A B C D Pack* 0. White /0 0. White /0 0. White / Gray / Gray / Gray / Gray / Red / Red / Red / Red / Black / Black / Black / Black / Blue / Blue / Blue / Gray / Gray / Gray Yellow Yellow Red Red Blue Blue Yellow Yellow Red Red Blue * Different standard packs are available as shown. To order the desired standard pack, please use the quantity required as a suffix to the cat. no. Example for 0 standard pack: /0 122 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

123 ORIGINAL DUAL WIRE FERRULES FERRULES Original Dual Wire Ferrules HIGHLIGHTS 2672 Tested According To: CSA Std C22.2 No Wire Connectors CSA Std C22.2 No. 188-M Splicing Wire and Cable Connectors ANSI/UL Std No. 486A - Wire Connectors and Soldering Lugs for Use with Copper Conductors ANSI/UL Std No. 486C - Splicing Wire Connectors Wires Cat. Barrel Length (B) Ferrule Dimensions mm Std. x AWG mm 2 Color No. mm A B C D1 D2 Pack* 2x 2x0. White /0 2x18 2x0.75 Gray /0 2x18 2x0.75 Gray /0 2x18 2x1 Red /0 2x18 2x1 Red /0 2x16 2x1.5 Black /0 2x16 2x1.5 Black /0 2x14 2x2.5 Blue /0 2x14 2x2.5 Blue /0 2x12 2x4 Gray x 2x6 Yellow x8 2x Red X6 2x16 Blue / * Different standard packs are available for many ferrules. To order the desired standard pack, please use the quantity required as a suffix to the Example: /0 for a standard pack of 0 Ferrule Ferrule Ferrule Std. Qty. AWG mm 2 Color Type Pack AB1-S Industry Standard AB1-S Orange White Yellow Red Blue AB2-S Industry Standard AB2-S Gray Black Ivory Green AB1-D DIN Standard AB1-D White Gray Red Black Blue AB2-D DIN Standard AB2-D Gray Yellow Red Blue FEATURES Dual Wire Insulated Dual Wire Ferrules have larger diameters and special shaped sleeves that accept two conductors of the same or different size. They provide an efficient connection of multiple wires in the same terminal clamp or simplify wire jumpering between terminal clamps. They are color coded with the same convention as the insulated DIN standard ferrules. To ensure efficient ferrule crimping always select the smallest ferrule diameter that fits the wire and use only professional crimping tools. Sleeve: polypropylene Tube: tin plated copper INSULATED FERRULES Assortment Box Handy Assortment Boxes for convenient dispensing and storage of Industry and DIN Standard Insulated Ferrules. Types AB1-S and AB1-D are equipped with five different ferrule sizes. Types AB2-S and AB2-D are equipped with four different ferrule sizes. Contents of each box is listed. CRIMPER SELECTOR GUIDE page 18 AB1-S AB2-S Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

124 FERRULES ORIGINAL UNINSULATED FERRULES HIGHLIGHTS Original Uninsulated Ferrules FEATURES Ferrules insure reliable electrical connections when terminating stranded flexible wire in terminal blocks, circuit breakers or other control devices. Uninsulated ferrules prevent wire strands from fraying and breaking and are extremely cost effective. Their shorter lengths and uninsulated bodies offer advantages when making terminations in printed circuit board terminal blocks and in other terminal blocks with smaller clamps or narrow widths. To ensure efficient ferrule crimping, always select the smallest ferrule diameter that fits the wire and use only professional crimping tools. (Please refer to the ordering pages and the Crimper Selector Guide on page 18.) Tube: tin plated copper 2672 Tested According To: CSA Std C22.2 No Wire Connectors CSA Std C22.2 No. 188-M Splicing Wire and Cable Connectors ANSI/UL Std No. 486A - Wire Connectors and Soldering Lugs for Use with Copper Conductors ANSI/UL Std No. 486C - Splicing Wire Connectors Cat. Barrel Length (A) Ferrule Dimensions mm Std. AWG mm 2 No. mm A B (ID) C Pack* / / / / / / / / / / / / / / / / / / / / / / MCM MCM MCM CRIMPER SELECTOR GUIDE page 118, 119, 125 and 126 * Different standard packs are available as shown. To order the desired standard pack, please use the quantity required as a suffix to the cat. no. Example for 0 standard pack: /0 124 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

125 UNIVERSAL CRIMPERS FOR ORIGINAL FERRULES FERRULES Universal Ferrule Crimpers for Original Ferrules Front Conductor Entry One die crimps a wide range of insulated and uninsulated ferrule sizes. Three Universal Ferrule Crimpers are offered to crimp different ferrule and wire size ranges up to 16mm 2 (6 AWG). Positive ratcheting with spring return Trapezoidal crimp geometry Comfort grip plastic handle Hardened steel frame, matte black Universal Ferrule Crimper Universal Ferrule Crimper Universal Ferrule Crimper Part No. Wire/ Ferrule Std. AWG mm 2 Pack Part No. Wire/ Ferrule Std. AWG mm 2 Pack Part No. Wire/ Ferrule Std. AWG mm 2 Pack E E E Replacement Spring Set: Handle Spring Set Rachet Spring Ferrule Crimper Side Conductor Entry Individual crimp cavities conform to industry standard insulated and uninsulated ferrules from 25-mm 2 (4-1 AWG). Replacement Spring Set: Handle Spring Set Rachet Spring Positive ratcheting with spring return Emergency release Trapezoidal crimp geometry Comfort grip plastic handle Hardened steel frame, matte black Replacement Spring Set: Handle Spring Set Rachet Spring Ferrule Crimper Ferrule Crimper Vise Mount Ferrule Crimper Part No. Wire/ Ferrule Std. AWG mm 2 Pack Part No. Wire/ Ferrule Std. AWG mm 2 Pack Part No. Wire/ Ferrule Std. AWG mm 2 Pack E E / MCM Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

126 FERRULES PNEUMATIC CRIMPING TOOL FOR ORIGINAL FERRULES HIGHLIGHTS FEATURES Altech's pneumatic crimping tools speed the crimping process of insulated or uninsulated ferrules for a wide range of wire sizes up to 8 AWG. Altech pneumatic crimpers are simple and easy to use. Just install the ferrule over the end of the stripped wire and insert it into either the front or side tool opening. Then touch the actuating lever or push the foot switch pedal to initiate the crimp cycle. Once the head closes it will automatically reopen after crimping. The resulting crimp features a compact trapezoidal cross section which is mechanically very strong and provides a large surface to insure a highly efficient electrical contact. Crimp ferrules efficiently and economically. A unique dual crimping head provides convenient front or side wire entry, allowing crimping from multiple positions. This features makes crimping in tight places simple. Choose either lever actuated, hand held units or hands-free foot switch operated table top models, in two basic tool sizes. Hand held models feature a flexible coil airhose with 1/4" NPT interchange connector for quick hook-up with a standard push-toconnect coupler. The table top units also include a flexible coil air hose to the foot switch and a 1/4" NPT interchange located on the foot switch for one hand push-to-connect supply hook-up. They feature a sturdy metal base with integral table clamp and dual storage trays for quick access to the ferrule supply. The air release port on the foot switch has been quieted with a sintered bronze air silencer. The foot switch has a metal frame and a tough fiberglass shroud. Its spring return pedal provides for short actuating cycles. Pneumatic Crimping Tool for Original Ferrules Operates on psi air supply Crimp insulated and uninsulated ferrules Trapezoidal crimp geometry Flexible coil air hose with 1/4" NPT interchange Metal tool body and base Hardened steel crimp head Wire/ Ferrule Size Tool Wt. Std. Tool AWG mm 2 g (lbs.) Pack Hand Held Crimper with Actuating Lever (.95) 1 Crimp Insulated Ferrules and Uninsulated Ferrules Hand Held Crimper with Actuating Lever (.95) 1 Crimp Insulated Ferrules and Uninsulated Ferrules Table Top Crimper with Foot Switch and Storage Trays (2.) 1 Crimp Insulated Ferrules and Uninsulated Ferrules Table Top Crimper with Foot Switch and Storage Trays (2.) 1 Crimp Insulated Ferrules and Uninsulated Ferrules Magnetic Mounting Holder for hand held pneumatic crimpers Counterbalance for hand held pneumatic crimpers Optional items for the hand held crimper include a counterbalance for maximum control and a magnetic holder for storage. 126 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

127 ORIGINAL FERRULE AND WIRE SIZE BY CRIMPER TYPE FERRULES Original Ferrule and Wire Size by Crimper Type Use this Selector Guide to determine ferrule and wire sizes which can be crimped. Refer to following pages for selection and ordering information of crimpers. 1. Determine the wire size(s) to be used. 2. To insure efficient ferrule crimping, always select the smallest ferrule diameter that fits the wire. 3. Based on the ferrule size, choose the crimper type appropriate for use. 4. Select the crimper style best suited for your application. CRIMPER STYLES UNIVERSAL FERRULE CRIMPER PNEUMATIC FERRULE CRIMPER VISE MOUNT FERRULE CRIMPER Wire Size AWG Ferrule Size mm Crimper Type E1.000 E1.005 E1.0 E1.015 E * * /0 70 3/0 95 4/0 1 2MCM 1 Dual Wire Ferrules E1.000 crimper covers 2x to 2x12 AWG dual wire ferrules E1.0 crimper covers 2x to 2x8 AWG dual wire ferrules E1.015 crimper covers 2x6 AWG dual wire ferrules Key: = Cavity Range * Insulated ferrule/wire size range is shown, uninsulated ferrule range is AWG ( mm 2 ). Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

128 INDEX Page Page Page Page /1M /1M /1M /1M /1M /1M /1M /1M...7 ADL2.5(E)D ADL2.5(E)D ADLG AGT AGT2.5/ AGT2.5/ AGT AGT4/ AGT4/ AGT AGT6/ AS AS2.5/ AS2.5/ AS AS4/ AS4/ AS AS6/ ATL ATL2.5H...83 ATLG AUX6...8 BS16E...5 BS16EM BS16EM BS24E...5 BS24EM BS24EM BS60E...5 BS60EM BS60EM CA2...49, 9 CA3...87, 9 CA2...49, 61, 9 CA CA CA2...9 CA512/ CA512/ CA512/ CA512/ CA512/ CA512/ CA512/ CA512/ CA512/ CA512/ CA512/ CA512/ CA512/ CA512/ CA512/ CA512/ CA512/ CA512/ CA512/ CA512/ CA512/ CA512/ CA512/ CA512/ CA512/ CA512/ CA512/ CA512/ CA512/ CA512/ CA514/ CA514/ CA514/ CA514/ CA514/ CA514/ CA514/14/4A...61 CA514/ CA514/ CA514/14-3A...61 CA514/ CA514/ CA514/ CA514/ CA514/ CA514/ CA514/ CA514/ CA514/ CA514/ CA514/ CA514/ CA514/ CA514/ CA514/ CA514/ CA514/ CA514/ CA514/ CA514/ CA514/ Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

129 INDEX Page Page Page Page CA514/ CA601/S...7 CA CA CA607/S/Q...48 CA611/S/Q...48 CA623/...48 CA623/ CA623/ CA623/ CA624/...48 CA624/ CA624/ CA624/ CA625/...48 CA625/ CA625/ CA625/ CA627/...48 CA627/ CA627/ CA627/ CA628/2...8, 48 CA628/3...8, 48 CA629/2...8, 48 CA629/3...8, 48 CA CA701-15/S...6 CA701-15/S-2M...6 CA M...6 CA , 61, 87, 9 CA CA703/ CA703/ CA703/...48 CA703/ CA703/ CA703/ CA703/ CA703/ CA703/ CA703/ CA CA704/ CA704/ CA704/...48 CA704/ CA704/ CA704/ CA704/ CA704/ CA704/ CA704/ CA CA705/ CA705/ CA705/...48 CA705/ CA705/ CA705/ CA705/ CA705/ CA705/ CA705/ CA707/S/Q/ CA707/S/Q/ CA707/S/Q/ CA707/S/Q/ CA707/TS/ CA707/TS/ CA707/TS/ CA7/...48 CA7/ CA7/ CA7/ CA711/...48 CA711/ CA711/ CA711/ CA714/...48 CA714/ CA714/ CA714/ CA715/...48 CA715/ CA715/ CA715/ CA716/...48 CA716/ CA716/ CA716/ CA717/...48 CA717/ CA717/ CA717/ CA718/...48 CA718/ CA718/ CA718/ CA721/...48 CA721/ CA721/ CA721/ CA721/ CA722/...48 CA722/ CA722/ CA722/ CA722/ CA723/...48 CA723/ CA723/ CA723/ CA724/...48 CA724/ CA724/ CA724/ CA725/...48 CA725/ CA725/ CA725/ CA727/...48 CA727/ CA727/ CA727/ CA727/ CA728/...61 CA728/ CA728/ CA728/ CA729/...48 CA729/ CA729/ CA729/ CA731/...48 CA731/ CA732/...48 CA732/ CA733/...48 CA734/...48 CA735/...48 CA737/...48 CA739/...48 CA741/...48 CA741/ CA741/ CA741/ CA741/ CA742/...48 CA742/ CA742/ CA742/ CA742/ CA743/...48 CA743/ CA743/ CA743/ CA744/...48 CA744/ CA744/ CA744/ CA745/...48 CA745/ CA745/ CA745/ CA747/...48 CA747/ CA747/ CA747/ CA747/ CA749/...48 CA749/ CA749/ CA749/ CA751/...48 CA751/ CA751/ CA751/ CA761/...48 CA761/ CA761/ CA761/ CA770/...48 CA771/...48 CA771/ CA771/ CA771/ CA772/...61 CA772/ CA772/ CA772/ CA774/ Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

130 INDEX Page Page Page Page CA774/ CA774/ CA781/...48 CA781/ CA781/ CA781/ CA801/ CA801/ CA801/ CA801/ CA801/ CA801/ CA , 61, 87, 9 CA803/ CA901/ CA901/ CA901/ CA901/ CA901/ CA901/ CA CAFL4U...22 CAFL4U(L)/ CAFL4U(L)/ CAFL4U(L)/ CAFL4U(L)/ CAFL4U(N)...22 CASP...8 CB16/2H...94 CB16/3H...94 CB4/ CB4/ CB4/2H...94 CB4/ CB4/3H...94 CB6/ CB6/2H...94 CB6/3H...94 CB6/4H...94 CBB CBB1LS...59 CBB CBB1LS...59 CBB CBB185LS...59 CBB35/...58 CBB35/LS...58 CBB CBB70LS...58 CBB CBB95LS...58 CBS3U...52 CBS4U...52 CBS5U...52 CCC4U...23 CDB/ CDB/ CDB/ CDB25/ CDB25/ CDB25/ CDB25/ CDB4/ CDB4/(1)...32 CDB4/11(1)...32 CDB4/ CDB4/2(1)...32 CDB4/ CDB4/3(1)...32 CDB4/ CDB4/4(1)...32 CDB4/ CDB4/5(1)...32 CDB4/ CDB4/6(1)...32 CDB6/ CDB6/ CDB6/ CDB6/ CDL4U SPACER...8 CDL4U(E)3LA/230V...46 CDL4U(E)3LA/3V...46 CDL4U(E)3LA/600V...46 CDL4U(E)3LA/90V...46 CDL4U(E)D CDL4U(E)D CDL4U(E)D CDL4U(E)D4/12V...43 CDL4U(E)D4/24V...43 CDL4U(E)DD CDL4U(E)DD CDL4U(E)DD CDL4U(E)DD CDL4U(E)DD5/12V...43 CDL4U(E)DD5/24V...43 CDL4U(E)L1/24V...45 CDL4U(E)L1/6V...45 CDL4U(E)L2/24V...45 CDL4U(E)L2/6V...45 CDL4U(E)LA/00V...46 CDL4U(E)LA/230V...46 CDL4U(E)LA/600V...46 CDL4U(E)LA/75V...46 CDL4U(E)LA/90V...46 CDL4U(E)LD1/12V...45 CDL4U(E)LD1/24V...45 CDL4U(E)LD2/12V...45 CDL4U(E)LD2/24V...45 CDL4U(E)LD3/12V...44 CDL4U(E)LD3/24V...44 CDL4U(E)LD4/24V...45 CDL4U(E)LD4/48V...45 CDL4U(E)LD5/1V...44 CDL4U(E)LD5/2V...44 CDL4U(E)LD5/24V...44 CDL4U(E)LD5/48V...44 CDL4U(E)MOV130V...47 CDL4U(E)MOV275V...47 CDL4U(E)MOV30V...47 CDL4U(E)MOV460V...47 CDL4U(E)MOV5V...47 CDL4U(E)MOV60V...47 CDL4U(E)MOV625V...47 CDL4U(E)MOV680V...47 CDL4U(E)MOV75V...47 CDL4U(E)N1/1V...44 CDL4U(E)N1/2V...44 CDL4U(E)RC CDL4U(E)RC CDL4U(E)SDB12VDC.47 CDL4U(E)SDB160VDC47 CDL4U(E)SDB24VDC.47 CDL4U(E)SDB48VDC.47 CDL4U(E)SDUA12VDC47 CDL4U(E)SDUA24VDC47 CDL4U(E)SDUA48VDC47 CDL4U(E)SDUK12VDC47 CDL4U(E)SDUK24VDC47 CDL4U(E)SDUK48VDC47 CDL4U(O)...45 CDL4UN... CDL4UN(I.S)... CDL4USP...42 CDLG CDLG CDLG4(I.S)...11 CDS6U...26 CDS6U/FT...26 CDS6U/SC...41 CDS6U/TS...26 CDTTU...30 CDTTUFT...30 CDTTUFTSC...41 CDTTUSC...41 CDTTU-SH...30 CENC CENC CENC CF4PFT...19 CF4SP...19, 29 CF4SP(L)/1-240V...19 CF4SP(L)/6-60V...19 CF4SPFT...29 CF4U...18, 89 CF4U(L)/1-240V...18 CF4U(L)/6-60V...18 CGMT CGTN...17 CGT16N...17 CGT35U...17 CGT4N...16 CGT4U...16 CGT6N...16 CHVU...37 CHV4U...37 CHV6U...37 CKT4SP...29 CKT4SPSC...41 CKT4U...28 CKT4U/ CM1.5S...93 CM1.5S CM2.5S...93 CM2.5S CM4S...93 CM4S CMB CMC CMC CMCG4...9 CMDB/...34 CMDB/ Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

131 INDEX Page Page Page Page CMDB/ CMDB/ CMDB25/...34 CMDB25/ CMDB25/ CMDB25/ CMDB4/...34 CMDB4/ CMDB4/ CMDB4/ CMDB6/...34 CMDB6/ CMDB6/ CMDB6/ CMS CMT CMTB CPD CPF...23, 75 CPF(L)1-240V...75 CPF(L)6-60V...75 CPFL1-240V...23 CPFL6-60V...23 CSB3/N3U...53 CSB3/N3UL...53 CSB4/N4U...53 CSB5/N5U...53 CSC16T...65 CSCP2.5T...92 CSCP2.5T CSDL4U...31 CSP CSTSB4U...55 CSTSB5U...55 CSTSN4U...54 CSTSN5U...54 CSTSN6U...54 CSTSPC CSTSPC CSTSPC CTC4U...39 CTL2.5U...14 CTL2.5U(I.S)...14 CTL2.5U(L)/ CTL2.5U(L)/ CTL2.5U(L)/ CTL2.5U(L)/ CTL2.5U(L)/ CTL2.5U-H...14 CTL2.5UH(I.S)D CTL2.5U-H(L)/ CTL2.5U-H(L)/ CTL2.5U-H(L)/ CTL2.5U-H(L)/ CTL2.5U-H(L)/ CTLG CTLG2.5(E)MOV130V.47 CTLG2.5(E)MOV275V.47 CTLG2.5(E)MOV30V...47 CTLG2.5(E)MOV60V...47 CTLG2.5(E)MOV75V...47 CTSU...7 CTSUSC...40 CTS16U...7 CTS2.5U-N...6 CTS25UN...7 CTS35UN...7 CTS4U-N...6 CTS4USC...40 CTS/70N...8 CTS/70NA...8 CTS6U...6 CTS6USC...40 CTS95/1N...8 CTSPC...49 CTT2.5UG...38 CTT2.5UJ...38 CTT2.5UK...38 CTT2.5UT...38 CX...65 CX/ CX CX2.5/1B...78 CX2.5/ CX2.5/ CX2.5/4(E)D CX2.5/4P...67 CX2.5PLN...78 CX2.5PN...78 CX2.5SLN...78 CX2.5SN...78 CX CX4/ CX4/ CX CX6/ CXCC CXCP2.5/ CXDB35/...35, 79 CXDB35/A...35, 79 CXDIN...78 CXDL CXDL2.5(E)D CXDL2.5(E)D CXDL2.5(E)D CXDL2.5(E)DD CXDL2.5(E)DD CXDL2.5(E)DD CXDL2.5(E)DD CXDL2.5(E)LD CXDL2.5(E)TS CXDL2.5(I.S)...71 CXDLG CXDLG2.5(I.S)...71 CXF CXF4(L)1-240V...74 CXF4(L)6-60V...74 CXG...69 CXG/ CXG CXG2.5/ CXG2.5/ CXG CXG4/ CXG4/ CXG CXG6/ CXK CXK2.5/ CXK CXLPN...78 CXM CXMG CXPOL...78 CXS CXS CXSG CXSG CXSR2N...78 CXSR4N...78 D35CLIP-M4...8 D35CLIP-M5...8 DDDL4U...31 DDFL4U... DDFL4U(E)/1... DDFL4U(E)/2... DDFL4U(E)/24... DDFL4U(E)/ DDFL4U(E)/48... DDFL4U(E)LR/ DDFL4U(E)LR/ DDFL4U(E)LR/ DDFL4U(E)LR/ DDFL4U(E)LR/ DDFL4ULR...21 EP0DL EP0DL4U...49 EPDL EPDL4U...49 EP2.5/4UN...49 EP6/U...49 EPADL EPADLG EPAS EPAS EPAS EPATL EPATL2.5H...87 EPATLG EPCAFL4U...49 EPCBS3U...61 EPCDL4U...49 EPCDL4UN...49 EPCDLG EPCDS6U...49 EPCDTTU...49 EPCKT4U...49 EPCKT4U/ EPCM1.5S...93 EPCM2.5S...93 EPCM4S...93 EPCMB EPCMC EPCMC EPCMT4...49, 89 EPCSCP2.5T...92 EPCSFL4U...49 EPCSTSU...61 EPCTC4U...49 EPCTL2.5U...49 EPCTL2.5U-H...49 EPCTLG Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

132 INDEX Page Page Page Page EPCX...87 EPCX/ EPCX EPCX2.5/ EPCX2.5/ EPCX EPCX4/ EPCX4/ EPCX EPCX6/ EPCXDL EPCXM EPCXS EPCXS EPDDFL4U...49 EPSTH EPSTH EPSTH4DT...61 EPSTH EPUSC...49 GMH1...1 GMH2...1 GMH3...1 GMH4...1 GMH5...1 GMH6...1 GMH7...1 GMH8...1 GMH8N...1 GTU...17 H4...5 H6...5 HCL HCL HCL HCL HCL HCL HCL HCL HCL HCL HCL HCL HCL HCL HCL HCL HEHWPR/ HEHWPR/ HEHWPR/ HEHWPR/ HEHWPR/ HEHWPR/ HEHWPR/ HEHWPR/ HEHWPR/...99 HEHWPR/ HEHWPR/ HEWPR/ HEWPR/ HEWPR/ HEWPR/ HEWPR/ HEWPR/ HEWPR/ HEWPR/ HEWPR/...97 HEWPR/ HEWPR/ HE16HWPR/ HE16HWPR/ HE16HWPR/ HE16HWPR/ HE16HWPR/ HE16HWPR/ HE16HWPR/ HE16HWPR/ HE16HWPR/...99 HE16HWPR/ HE16HWPR/ HE16WPR/ HE16WPR/ HE16WPR/ HE16WPR/ HE16WPR/ HE16WPR/ HE16WPR/ HE16WPR/ HE16WPR/...97 HE16WPR/ HE16WPR/ HE1HWPR/ HE1HWPR/ HE1HWPR/ HE1HWPR/ HE1HWPR/ HE1HWPR/ HE1HWPR/ HE1HWPR/ HE1HWPR/...98 HE1HWPR/ HE1HWPR/ HE1WPR/ HE1WPR/ HE1WPR/ HE1WPR/ HE1WPR/ HE1WPR/ HE1WPR/ HE1WPR/ HE1WPR/...96 HE1WPR/ HE1WPR/ HE42BU/ HE42BU/ HE42BU/ HE42BU/ HE42BU/ HE42BU/ HE42BU/ HE42BU/ HE42BU/...0 HE42BU/ HE42BU/ HE42SBU/ HE42SBU/ HE42SBU/ HE42SBU/ HE42SBU/ HE42SBU/ HE42SBU/ HE42SBU/ HE42SBU/...1 HE42SBU/ HE42SBU/ HE42SST/ HE42SST/ HE42SST/ HE42SST/ HE42SST/ HE42SST/ HE42SST/ HE42SST/ HE42SST/...1 HE42SST/ HE42SST/ HE42ST/ HE42ST/ HE42ST/ HE42ST/ HE42ST/ HE42ST/ HE42ST/ HE42ST/ HE42ST/...0 HE42ST/ HE42ST/ HE4HNWPR/ HE4HNWPR/ HE4HNWPR/ HE4HNWPR/ HE4HNWPR/ HE4HNWPR/ HE4HNWPR/ HE4HNWPR/ HE4HNWPR/...98 HE4HNWPR/ HE4HNWPR/ HE4WPR/ HE4WPR/ HE4WPR/ HE4WPR/ HE4WPR/ HE4WPR/ HE4WPR/ HE4WPR/ HE4WPR/...96 HE4WPR/ HE4WPR/ HE6HWPR/ HE6HWPR/ HE6HWPR/ HE6HWPR/ HE6HWPR/ HE6HWPR/ HE6HWPR/ HE6HWPR/ HE6HWPR/...99 HE6HWPR/ HE6HWPR/ HE6WPR/ Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

133 INDEX Page Page Page HE6WPR/ HE6WPR/ HE6WPR/ HE6WPR/ HE6WPR/ HE6WPR/ HE6WPR/ HE6WPR/...97 HE6WPR/ HE6WPR/ HEP4/16H...4 JX/ JX2.5/...86 JX2.5/ JX2.5/ JX2.5/ JX2.5/ JX2.5/ JX2.5/ JX2.5/ JX4/...86 JX4/ JX4/ JX4/ JX4/ JX4/ JX6/...86 JX6/ JX6/ JX6/ JXS/ JXS/ JXS6/ JXS6/ LCCDS...26 LCSTH4DT...57 MH MH4...6 MHPTB MT MT MT MT MT2B MT2G MT MT MT MT MT6F MT MT MT9F MTG1...1 MTG2...1 NEB...36 NEB NES...36 ODL ODL2.5(I.S)...13 ODL4U...12 ODLG ODLG2.5(I.S)...13 PP2.5/4UN...49 PP25UN...49 PP35UN...49 PP6/U...49 PPCMT4...49, 89 PPCX PPCX PPCX4/ PPCX PSPTB PSPTB PTB35/...60 PTB35/SH...60 PTB70/ PTB70/95SH...60 Q11/ QJ8/ SLS SLS SLS SP2.5/4UN...49 SP6/U...49 SPCDL4U...49 SPCDLG SPCMB STH STH STH4DT...57 STH4DTFT...57 STH4DTSH...57 STH SWL...8 SWL4...8 TM5...1 TPSLS...26 TX TX TX WLX...8 WLX WLX4...8 WLX6...8 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

134 TERMS & CONDITIONS STANDARD TERMS AND CONDITIONS OF SALE TITLE - Title to the products of ALTECH shall remain with ALTECH until payment is made in full by Customer. Such reservation of title is for the purpose of securing the purchase price and shall not relieve Customer of the duty to inspect the products upon receipt, to notify ALTECH of any deficiencies or defects, and to exercise due care in the use, installation, operation, and maintenance of the products when on the premise of the Customer or under the control of the Customer. Notwithstanding any reservation of title by ALTECH, risk of loss shall pass to customer at any time of shipment. SHIPMENT AND DELIVERY - All orders for destination in the mainland United States (less Hawaii, Alaska and non-continental United States possessions) will be shipped F.O.B. Flemington, N.J. All destination, shipping and other charges shall be paid by the Customer in accordance with AL- TECH s then current shipping and billing practices. Delivery dates given in the acceptance of any order are approximate. ALTECH shall not be liable for delays in delivery or in performance due to causes beyond its reasonable control including acts of God, acts of Customer, acts of civil or military authority, fires, strikes or other labor disturbances, war, riot or delays in transportation. In the event of such delay, the date of delivery or performance shall be extended for a period equal to the time lost by reason of the delay. PRICE - PRICES in any ALTECH publication are subject to change without prior notification. Catalog prices are based on prices published in the current price list. All written quotations are valid for thirty (30) days from the date of quotation. Customer shall pay all sales, use, excise or similar taxes whenever ALTECH must itself pay and/or collect such tax from Customer arising out of the sale. PAYMENT - Customer agrees to make payment within thirty (30) days of date of the invoice from ALTECH. Customer agrees to pay a late payment charge of one and one-half percent (1.5% per month, or the maximum late payment charge permitted by applicable law, whichever is less, on any unpaid amount for each calendar month (or fraction thereof) that such payment is in default. Orders amounting to less than $0.00 will be billed at $0.00 plus freight. Full carton purchases are required. In the event of referral to an attorney for collection, reasonable attorney s fees for collection of the overdue amount shall be paid by Customer. In the event payment is not received within 30 days from the date of invoice, any discount shall be cancelled and the full list price will be due. LIMITED WARRANTY - ALTECH warrants to Customer that the equipment purchases shall be free from defects in material and workmanship under normal use and service for a period of one year from shipment. Written notice as an explanation of the circumstances of any claim that the equipment has proved defective in material or workmanship shall be given promptly by the Customer to ALTECH. ALTECH will not be liable for any misuse, improper operations, improper installation, improper maintenance, alteration, modification, accident or unusual degradation of the equipment or parts due to an unsuitable installation environment. No representation of other affirmation of facts, including but not limited to statements regarding capacity, suitability for use or performance of the equipment, shall be or be deemed to be a warranty or representation by ALTECH for any purpose, nor give rise to any liability or obligation of AL- TECH whatsoever. Customer s sole and exclusive remedy in the event of breach of warranty, as set forth herein, is expressly limited to (1) the correction of the defect by adjustment, repair, modification, or replacement, or (2) issuance of a credit or refund of the purchase price for the defective equipment at ALTECH s election and sole expense. EXCEPT AS SPECIFICALLY PROVIDED IN THIS AGREEMENT, THERE ARE NO OTHER WARRANTIES EXPRESSED OR IMPLIED IN- CLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY EXTENDS ONLY TO THE CUSTOMER FROM AL- TECH OR ITS AUTHORIZED DISTRIBUTOR. LIMITATION OF LIABILITY - IN NO EVENT, SHALL ALTECH BE LI- ABLE FOR LOSS OF PROFITS, INDIRECT, SPECIAL, CONSEQUEN- TIAL OR OTHER SIMILAR DAMAGES ARISING OUT OF ANY BREACH OF THIS AGREEMENT OR OBLIGATIONS UNDER THE AGREEMENT. ALTECH SHALL NOT BE LIABLE FOR ANY DAMAGES CAUSED BY DELAY IN SHIPMENT, INSTALLATION OR FURNISHING OF EQUIP- MENT OR SERVICES UNDER THIS AGREEMENT. No action arising out of any claimed breach of this Agreement may be brought by either party more than two (2) years after the cause of action has accrued. PATENT INDEMNITY - ALTECH shall defend or settle any suit or proceeding brought against Customer based on a claim that any equipment made to ALTECH design and furnished hereunder constitutes an infringement of any existing United States patent, provided (ALTECH) is notified promptly in writing and is given complete authorization and information required for the defense, and ALTECH shall pay all damages and costs awarded against Customer, but shall not be responsible for any costs, expense or compromise incurred or made by Customer without ALTECH s prior written consent. If any equipment is in ALTECH s opinion likely to or does become the subject of a claim for patent infringement, ALTECH may at its option and expense procure for Customer the right to continue using the device, modify it to become non-infringing, but in the event ALTECH is not reasonably able to modify, substitute, or otherwise procure for Customer the right to continue using it, ALTECH will remove such equipment and refund to Customer the amount paid in excess of a reasonable rental for past use. ALTECH shall not be liable for any infringement or claim based upon use of the equipment in combination with other equipment not supplied by ALTECH or with modifications made by Customer. The foregoing states the entire liability of ALTECH to Customer arising from patent infringement. SELLER S REMEDIES - Should Customer fail to make any payment within ten () days of its due date, or fail to perform any other of the Customer s obligation hereunder upon thirty (30) days written notice, or should Customer be or become insolvent or be a party to any bankruptcy receivership proceeding prior to full payment of all amounts payable hereunder, ALTECH may: (a) with or without demand or notice to customer declare the entire amount unpaid immediately due and payable; (b) enter upon the premises where the equipment may be found and remove it (Customer shall assemble the equipment and make it available to ALTECH at a place reasonably convenient to both parties and shall permit and assist ALTECH in effecting the retaking and removal of the equipment); and (c) sell any or all the equipment as permitted under applicable law, applying the proceeds of the sale to payment of the expenses of retaking, repairing and selling the equipment, reasonable attorney fees and to the satisfaction of all indebtedness then due and unpaid under this Agreement. Any surplus shall be paid to Customer and any deficiency shall be paid to ALTECH by Customer. The remedies provided herein shall be cumulative and in addition to all other remedies provided by law or equity or under the Uniform Commercial Code. GOVERNING LAW - This agreement will be governed by the Laws of the State of New Jersey. GENERAL - This Agreement shall only become effective and binding when either (a) it has been accepted and executed by an authorized representative of ALTECH, or (b) the equipment has been shipped to Customer, with or without acceptance in writing hereon. Notice of acceptance is hereby waived by Customer. Customer hereby acknowledges receipt of a true and complete copy hereof. No addition to or modification of any of the Terms and Conditions of Sale as they appear herein shall be binding upon ALTECH unless signed in writing by duly authorized representative of ALTECH in Flemington, N.J. Typographical and clerical errors in quotations, orders and acknowledgments are subject to correction. This Agreement is not assignable without the prior written consent of ALTECH. Any attempt to assign any of the rights, duties or obligations of this Agreement without such consent is void. If any provision or provisions of this Agreement shall be held to be invalid, illegal or unenforceable, the validity, legality and enforceability, of the remaining provisions shall not in any way be affected or impaired thereby. ALTECH is not responsible for failure to fulfill its obligation under this Agreement due to causes beyond its control, or except as agreed herein. THE CUSTOMER ACKNOWLEDGES THAT HE HAS READ THE AGREEMENT, UNDERSTANDS IT, AND AGREES TO BE BOUND BY ITS TERMS AND CONDITIONS. FURTHERMORE, THE CUSTOMER AGREES THAT IT IS THE COMPLETE AND EXCLUSIVE STATEMENT OF THE AGREEMENT BETWEEN THE PARTIES, WHICH SUPER- SEDES ALL PROPOSALS OR PRIOR AGREEMENTS, ORAL OR WRIT- TEN, EXPRESSED OR IMPLIED, AND ALL OTHER COMMUNICATIONS BETWEEN THE PARTIES RELATING TO THE SUBJECT MATTER OF THIS AGREEMENT. 134 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

135 ALTECH OFFERS A LARGE SELECTION OF AUTOMATION AND CONTROL COMPONENTS OTHER PRODUCTS Circuit Protection Devices Altech the market leader in UL8 Manual Motor Controllers/ Miniature Circuit Breakers now introduces UL489 Miniature Circuit Breakers and UL77 Supplementary Protectors. The UL489 versions are DIN rail mounted, 17.5mm wide, thermal magnetic, 240V, 480Y/277V AC, /60Hz, 125 and 2 VDC models, with short circuit interrupt capacity of ka, a positive trip indicator, and are line/load reversible. The UL77 versions are DIN rail mounted, 17.5mm wide, thermal magnetic, 480Y/277V AC, /60Hz, a short circuit withstand capacity ka, have a positive trip indicator. Altech Corp. 35 Royal Rd., Flemington, NJ FAX Industrial Enclosures Altech offers a broad selection of non-metallic and aluminum Industrial Enclosures to meet your diverse design requirements. Sizes range from 1.97 x 2.05 x 1.38 to x x 5.59 inches. Materials include polycarbonate, polystyrene, polypropylene, ABS or aluminum. Polycarbonate and aluminum series have been recently expanded. Protection up to IP67 (NEMA 4, 4X). Smooth sidewalls or sidewalls with knockouts. Enclosures can be mounted directly onto a panel, frame or other mounting surfaces. EMI / RFI Coating is available. Competitive cover printing is available. Hinge Kits. Customization available. Altech Corp. 35 Royal Rd., Flemington, NJ FAX Smart Relays Supports up to 48 I/Os (32 digital inputs & 16 digital outputs). DST Feature Available. Backlit LCD Screen for display & modification of preselected parameters of functional blocks, viewing I/O status and programming on the device. PC software for programming, online & offline simulation, documentation & printing. Designed for use in automation for commercial & Industrial sectors. Modbus Communication. UL 8 (UL File No. E352868), IEC and IEC ~11. 2 lines of ladder programming. 16 soft text messages, Time Switches, Compare Counters, Timers, Counters & 12 analog functions. Altech Corp. 35 Royal Rd., Flemington, NJ PCB Spring Clamp & Push-In New spring clamp printed circuit board terminal blocks with push-in technology. Fixed push-in PCB terminals, PCB power terminals push-in, tension spring terminals and push-in plugs. Altech Corp. 35 Royal Rd., Flemington, NJ Motor Disconnect Switches Altech s line of Motor Disconnect Switches are UL 8 listed as Manual Motor Controllers for AC Motor Starting Across-the-line and AC General use. This new 16 page catalog includes the 3 different handle designs, which are all available in gray/black or yellow/red housings. Electrical ratings are 25-1A / 600V. The switches are non-fused DIN Rail mountable. Neat features include: snap-on auxiliary switches, door mounting kit and a retrofit 30A fuse holder. Also featured are Enclosed Motor Disconnect Switches & Fused Enclosed Motor Disconnect Switch (30A) in plastic or stainless housings. Altech Corp. 35 Royal Rd., Flemington, NJ Power Supplies Altech DIN RAIL mountable power supplies have Universal AC input. They are suitable for industrial and automation applications. UL8 Listed or UL Recognized. Single and Three phases up to 960W. Outputs of 5V, 12V, 15V, 24V and 48V. Class 2 devices are available. Installed on DIN rail TS35/ 7.5 or 15. Protections of Short circuit / Overload / Overvoltage / Over temperature. Cooling by free air convection. All-In-One DC-UPS, battery based. Ultra Capacitor DC-UPS, no battery required. Worldwide approvals. 3 year warranty. Altech Corp. 35 Royal Rd., Flemington, NJ Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)

136 Altech Corporation 35 Royal Road Flemington, NJ P F Altech Corp K Printed 1 March 17