20 General technical data XI/ON

Transcription

1 20 General technical data XI/ON General technical information General technical data XI/ON Potential isolation Ambient temperature Operating temperature Storage temperature Relative humidity Noxious gas SO 2 H 2 S Resistant to vibration Operating conditions Resistant to shock Resistant to repetitive shock Topple and fall Protection class Electromagnetic compatibility (EMC) Tests via optocoupler 32 F to +131 F (0 to +55 C) -13 F to +185 F (-25 to +85 C) 5 to 95 % (indoor), Level RH-2, without condensation (storage at 45 C) 10 ppm (rel. humidity < 75 %, without condensation) 1.0 ppm (rel. humidity < 75 %, without condensation) according to EN according to EN according to IEC according to IEC according to IEC and free fall according to IEC IP 20 according to EN (Industry) Measurement data in TOP construction Insulation stripping length Crimpable wire Nominal diameter "e" solid core H 07V-U "f" flexible core H 07V-K "f" with ferrules according to DIN /1 (ferrules crimped gas-tight) Plug gauge according to IEC 947-1/1988 Protection class Approvals according to VDE 0611 Teil 1/8.92 / IEC /1989 tension clamp or screw connection 8 mm 1.5 mm to 2.5 mm to 1.5 mm to 1.5 mm 2 A1 IP 20 CE UL CSA

2 24 Ð power distribution modules Bus Refreshing module Module overview Supply XI/ON modules and gateway with a system nominal voltage of 5 V DC via the internal module bus Supply XI/ON modules with nominal voltage of Can be used to create potential groups are available with or without connections to C-rails LEDs for indicating system and field supply as well as diagnostics Bus Refreshing module with diagnostics Nominal voltage System supply U SYS for U SYS = for U SYS = 5 V DC Field suppy U L Ripple Residual ripple Maximum operating current I El Maximum system current supply I MB Number of diagnostic bits with gateway supply without gateway supply XN-BR-24VDC-D / 5 V DC 18 to 30 V DC 4.7 to 5.3 V DC (18 to 30 V DC) 1.5 A Connection for module bus light grey Connection for module bus yellow -B -B -B -B Only the modules XN-P3x-SBB or XN-P4x-SBBC (first module after the gateway) can be used to supply the gateway. Assignment of base modules: a Base module with gateway suply: light grey connection b Base module without gateway supply: yellow connection

3 Ð power distribution modules Bus Refreshing module Wiring diagram XN-P4x-SBBC with gateway supply XN-P4x-SBBC-B without gateway supply Module bus supply + Wiring diagram XN-P3x-SBB with gateway supply XN-P3x-SBB-B without gateway supply Module bus supply + 25 Field supply Field supply PE Ordering information Type XN-BR-24VDC-D -B -B -B -B Catalog number

4 26 Ð power distribution modules Power Feeding modules with diagnostics Module overview Supply the XI/ON I/O modules with a nominal voltage of or 120/230 V AC Can be used to create potential groups are available with or without connections to C-rails LEDs for indicating system and field supply as well as diagnostics Wiring diagram printed on the module lid Power Feeding module with diagnostics Nominal voltage Field suppy U L Nominal current from module bus I MB Ripple Residual ripple Maximum operating current I El Voltage anomalies Number of diagnostic bits XN-PF-24VDC-D 18 to 30 V DC (18 to 30 V DC) 28 ma according to EN and EN XN-PF-120/230VAC-D 120/230 V AC 120/230 V AC 25 ma according to EN and EN Ordering information Type s XN-PF-24VDC-D XN-PF-120/230VAC-D Catalog number

5 Ð power distribution modules Wiring diagrams: Power Feeding module Wiring diagram XN-P3x-SBB for XN-PF-24VDC-D Wiring diagram XN-P4x-SBBC for XN-PF-24VDC-D 27 Wiring diagram XN-P3x-SBB for XN-PF-120/230VCD-D Wiring diagram XN-P4x-SBBC for XN-PF-120/230VCD-D