(see also technical drawings) Width with inlay
|
|
|
- Harvey Campbell
- 5 years ago
- Views:
Transcription
1 Technical Data Sheet SEMIFLOW CO.65/xxxPI V2.0 The sensors SEMIFLOW CO.65/xxxPI V2.0 designed as clamp-on-sensors with inlay detect the flow rate of liquids in plastic tubes of different diameters within a few milliseconds. The sensors have no contact to the medium or product and are suitable for applications in fields with strict hygienic standards e.g. the medical technology, biotechnology and pharmaceutical industry as well as chemical and semiconductor industry. Due to the current, frequency and switching outputs industrial dosing applications can be supported. The RS485 interface allows bus operation of up to 12 sensors in rough industrial environments. The SEMIFLOW CO.65/xxxPI V2.0 sensors with complete built-in electronics can be installed in machines or apparatuses. General sensor specification Specification SEMIFLOW Order-No. Measuring channel (see also technical drawings) Width with inlay Tubing OD Dimensions (L x W x H) CO.65/080PI V mm 1/4 44 x 44 x 34 mm CO.65/120PI V mm 3/8 44 x 44 x 38 mm CO.65/160PI V mm 1/2 44 x 56 x 41 mm CO.65/190PI V mm 3/4" 50 x 76 x 54 mm CO.65/260PI V mm 1 50 x 76 x 60 mm Tubing properties Defined by customer: PFA To realize an acoustic coupling of the sensor, the customer specific tube is surrounded by a silicone inlay. NOTE! Recommended is the use of the delivered silicone inlay for coupling. Sensors are factory calibrated with customer tubing and silicone inlay. Sensors are calibrated att Medium = 23 C with water. 1
2 SEMIFLOW CO.65/xxxPI V2.0 Technical Data Sheet Accuracy With standard flow rate and standard tubing: Specification SEMIFLOW Flowrate Accuracy for water: adjusted at 23 C ± 2 K and 1 bar on standard tube CO.65/080PI V ml/min ml/min: ± 16 ml/min ml/min: ± 2 % CO.65/120PI V ml/min ml/min: ± 24 ml/min ml/min: ± 2 % CO.65/160PI V ml/min ml/min: ± 32 ml/min ml/min: ± 2 % CO.65/190PI V ml/min ml/min: ± 36ml/min ml/min: ± 2 % CO.65/260PI V ml/min ml/min: ± 80 ml/min ml/min: ± 2 % The sensors are calibrated to specific tubing. Please find the data in the sensor calibration report. Technical data SEMIFLOW CO.65/080 V2.0 Flow Sensor for liquids Measuring method Ultrasound, two sections of measurements, dry coupling, silicone inlay Calibration Sensors are factory calibrated for water at 23 C ± 2 K, tube end depressurized; other calibration on request Mounting Fixed installation with screws: 4 fixing holes CO.65/080PI V2.0 CO.65/160PI V2.0 CO.65/190PI V2.0, CO.65/260PI V2.0 M4, 8 mm deep M6, 10 mm deep Media Sensor materials Labeling Operating voltage Current consumption Electrical connection Shielding Water or other acoustically transparent liquids Measuring channel: PMMA black, silicone inlay Housing: PVCC, grey, screws: plastics See technical drawings VDC, maximum ripple 10 %, protection against reverse-polarity Maximum 30 ma (with open current, frequency and switching output) Fixed cable (10 m), 8-pin connector Required: Shield of cable has to be connected on side of machine 2
3 Technical Data Sheet SEMIFLOW CO.65/xxxPI V2.0 Interfaces (* not activated) Current output for flow rate Current output for flow rate: 0/4 20 ma Frequency output for flow rate: 0 20 khz, 5 V digital * RS485 interface: bus-capable * Switching output: configurable as PNP / NPN / Push-Pull, 0 30 V Digital input * NOTE: Load to GND. The max. load depends on the operating voltage: 12 V HOST +U B SENSOR +U B Input Current output Load Frequency output for flow rate * HOST Input SENSOR Frequency output 5 V Load min. 5 RS485 interface * Half-duplex operation / baud / 8 data bit / no parity / 1 stop bit / no handshaking NOTE: Please find the description of the serial protocol for details (upon request) or +5 V HOST SENSOR +3.3 V 10 k 10 k A recommended k B A B 10k 10 k Recommended electrical connection of the RS 485 interface. CAUTION! If the interface is not used the two pins A & B shall remain open. 3
4 SEMIFLOW CO.65/xxxPI V2.0 Technical Data Sheet RS485 Bus operation * Switching output Digital input * The sensor supports bus operation with max. 12 devices. The default address is #01. NOTE: The address can be changed with the help of the ABD Monitor. Permitted are addresses from #01 #12. Menu: Identification RS485 address Freely configurable as PNP / NPN / Push-Pull, 0 30 V for applications: adapting batch process (dosing) or threshold switch of flow or slow pulses of volume (max.. 20 Hz) Maximum 100 ma Freely configurable: for example for zero point calibration of flow or start dosing processes Voltage resistant up to 30 V HOST SENSOR Digital input Ambient- / Media temperature C, other temperatures available on request Storage temperature C Protection class Directives and standards Maintenance IP65 EMC directive 2014/30/EU RoHS: 2011/65/EU, exception: III 7cI/ IV 15 Acoustic emission: IEC Maintenance-free Scope of delivery SEMIFLOW CO.65/xxxPI V2.0 according to specification Silicone inly for each sensor Fixed cable (10 m), 8-pin connector Optional accessories SONOFLOW Monitor V2.0 for setting parameters and recording measurements consisting of USB Data Converter, type 013 for the connection to a computer Power supply unit (24 VDC) 8-pin connecting cable (for service) 10 m USB cable, type A-B, length 2 m CD with Software SONOFLOW Monitor and driver for Windows Optional Calibration protocol 4
5 Technical Data Sheet SEMIFLOW CO.65/xxxPI V2.0 Technical drawings 5
6 SEMIFLOW CO.65/xxxPI V2.0 Technical Data Sheet 6
7 Technical Data Sheet SEMIFLOW CO.65/xxxPI V2.0 7
8 SEMIFLOW CO.65/xxxPI V2.0 Technical Data Sheet 8
9 Technical Data Sheet SEMIFLOW CO.65/xxxPI V2.0 9
10 SEMIFLOW CO.65/xxxPI V2.0 Technical Data Sheet Electrical Connection 8-pole connector to 4-pole cable: Male connector (at the sensor) Female connector (at the cable) Connecting cable Pin Color Connection Assignment 1 White 2 Brown Operating voltage VDC 3 Green Current output (0/4 20 ma) 4 RS485 B 5 RS485 A 6 Frequency output 0 20 khz 7 Yellow Switching output: PNP / NPN / Push-Pull 8 Shield If available, should be connected on side of machine Drawings are not to scale. Information is subject to change without notice! HEADQUARTERS GERMANY AMERICAS SONOTEC Ultraschallsensorik Halle GmbH Nauendorfer Str Halle (Saale), Germany Tel.: +49 (0)345 / sales_eu@sonotec.de SONOTEC US Inc. 190 Blydenburgh rd Suite 8 2 nd floor Islandia, New York 11749, USA Phone: / sales@sonotecusa.com 10
Technical Data Sheet SONOFLOW CO.55/xxxSD(H) V2.0
Technical Data Sheet SONOFLOW CO.55/xxxSD(H) V2.0 The sensor series SONOFLOW CO.55/xxxSD V2.0 with stainless steel housing and display designed as clamp-on-sensors detect the flow rate of liquids in plastic
Flow Sensor SONOFLOW CO.55
Flow Sensor SONOFLOW CO.55 Operating Manual Device: Model: Type: Flow Sensor SONOFLOW CO.55 Manufacturer: SONOTEC Ultraschallsensorik Halle GmbH Nauendorfer Str. 2 06112 Halle (Saale), Germany Phone: +49
Minimum < 0.2 ms, maximum 2 ms, typical 1 ms; On request: Delays or holding times for bubble events % relative humidity (not condensing)
The air bubble detector is used to detect air or gas bubbles in plastic tubes filled with liquid and is intended to prevent air infusions. However, it can also be used as a wet/dry sensor. The sensor has
SONOFLOW Monitor Short Instructions. For SONOFLOW Sensors of the Series CO.55 V2.0
SONOFLOW Monitor Short Instructions For SONOFLOW Sensors of the Series CO.55 V2.0 Manufacturer: SONOTEC Ultraschallsensorik Halle GmbH Monitor model: SONOFLOW Monitor V02.xx For sensor types: Flow Sensors
SERIE 59. Rear clamp. Frontal clamp HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS
HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 50.000 pulses per turn External diameter 58 mm Hollow shaft from Ø 10 to 14 mm Protection class IP67 according
RS485 (S85- -Y13) Display (S85- -Y13) Setting push-buttons (S85- -Y03) Power supply Vdc 24 V +/- 20% PNP NPN Output Push pull
LASER distance sensor for precise measurement up to 20 m with a millimeter of resolution and repeatability through the Time of Flight technique Time of Flight technology Class 2 visible red LASER for an
Dimensions. Model Number. Electrical connection emitter. Features. Electrical connection receiver. Product information. Pinout OBE12M-R100-S2EP-IO-V31
OBEM-R00-SEP-IO-V Dimensions. 8.7. 7..9. M (x).. ø... 0 9.9 7. 7. Release date: 08-06-08 :0 Date of issue: 08-06-08 80998_eng.xml Model Number OBEM-R00-SEP-IO-V Thru-beam sensor with -pin, M8 x connector
ParCon and PosCon line sensors
and line sensors and line sensors Introduction 364 Overview product family measuring mode: edges, width measuring mode: edges, width measuring mode: sum of all dark areas, edges switchable measuring field
Sensors. Compact: S60 Series. Compact: S60 Series. Multifunction Optoelectronic Sensors
Multifunction Optoelectronic Long operating distance Sensitivity adjustment Independent NO-NC outputs M12 connection with standard NPN or PNP configuration The S60 sensors have a sensitivity adjustment
New! CleanStar SonicLine High Purity PFA Ultrasonic Flowmeters. Extended low flow measuring range ⅜" unit: l/min.
CleanStar SonicLine High Purity PFA Ultrasonic Flowmeters Product overview and technical data New! Extended low flow measuring range ⅜" unit: 0.03-6 l/min. VALVES, MEASUREMENT AN CONTROL SYSTEMS Synergy
Online data sheet WL9LG-3P2232 W9LG-3 SMALL PHOTOELECTRIC SENSORS
Online data sheet WL9LG-3P3 W9LG-3 A B C D E F Illustration may differ Ordering information Type Part no. WL9LG-3P3 05834 Other models and accessories www.sick.com/w9lg-3 H I J K L M N O P R S T Detailed
Delivery. Connection. C. AA+BB Helicoidal cable 2. Radial M12 8p CCW. 3. Radial M23 12p CCW
PROGRAMMABLE INCREMENTAL HOLLOW SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS Programmable incremental optical encoder from 1 to 65.536 pulses per rotation Programmable via USB, without an additional programming
Incremental encoders Solid shaft with clamping or synchro flange pulses per revolution
GI55, GI56 Features Encoder with solid shaft ø mm or ø6 mm Max. 6000 pulses per revolution Optical sensing method Clamping or synchro flange Industrial standard High rotation speed up to 000 rpm Optional
Inductive displacement measurement system model series IE25P with programmable analogue interface
Inductive displacement measurement system Document No.: IE 12781 BE Date: 05.01.16 Contactless, wear-free sensor system Analogue interface Measuring range programmable Measuring range up to 0 mm Stainless
SENSORS PHOTOELECTRIC S3Z SERIES MINIATURE SENSOR APPLICATIONS HIGHLIGHTS.
PHOTOELECTRIC MINIATURE SENSOR SENSORS S3Z SERIES The high operating distances and costeffective price, makes the S3Z series in the miniature format with dimensions and standard fixing affirmed in the
Absolute Encoders Multiturn
The multiturn encoders 6 and 8, with interface and combined optical and magnetic sensor technology, offer a maximum resolution of 5 bits. These encoders are programmable via the Ezturn software. The hollow
Level measurement CleverLevel LBFH Point level detection
Product highlights User benefi ts Safe detection of liquids, bulk solids and powders Short immersion length Ecellent cleanability Capable of differentiation between foam and liquid Insensitive to adherent
Trigger high-speed, retro-reflective sensors for bottles. Dimensioned drawing
Trigger high-speed, retro-reflective sensors for bottles Dimensioned drawing en 01-2013/11 50121192 10-30 V DC 0 3.6m 5 khz We reserve the right to make changes DS_PRK18BFX_en_50121192.fm Trigger high-speed,
Product description. The ability to teach up to four colors can lead to faster changeovers and shorter downtime. The CS8 series offers high
S8 OLOR SENSORS Product description The ability to teach up to four colors can lead to faster changeovers and shorter downtime. The S8 series offers high (85 µsec) enabling higher throughput. And, the
SENSORS SR23. Fork Sensors - SR23. High efficiency fork sensor for booklet and multilayer labels detection APPLICATIONS
Fork Sensors - SR23 SR23 High efficiency fork sensor for booklet and multilayer labels detection Multilayer labels detection Up to 0,5 mm of minimum size labels/gap 5 mm slot width 50 mm slot depth Dynamic
Diffuse reflection light scanner with background suppression. Dimensioned drawing
Specifications and description HRTR 3B Standard Dimensioned drawing We reserve the right to make changes DS_HRTR3B_Standard_en_51734.fm en 13-213/3 51734 1-3 V DC 1 khz A 2 LS 5 4mm 2mm with black-white
Basic Series 18 mm Diameter Cylindrical Sensors
Diffuse Mode See pages 384-385 Features: Light on/dark on mode determined by wiring Adjustable sensitivity Sensing Ranges: 2 mm, 5 mm Outputs: NPN, PNP Thru-Beam Mode See pages 387-388 Features: Laser
Online data sheet VTE18-4P4240 V18 CYLINDRICAL PHOTOELECTRIC SENSORS
Online data sheet VTE8-P0 V8 VTE8-P0 V8 A B C D E F Illustration may differ Ordering information Type Part no. VTE8-P0 606 Other models and accessories www.sick.com/v8 H I J K L M N O P Q R S T Detailed
MLV41 Series Miniature Sensors
MLV41 Series Miniature Sensors Diffuse Mode with Background Suppression See pages 5-53 Features: Etended sensing range compared to similar housings High insensitivity to target color Sensing Range: 35
XUK8TAKSMM12 photo-electric sensor - XUK - diffuse - Sn 5m 1Q auto PNP/NPN
Characteristics photo-electric sensor - XUK - diffuse - Sn 5m 1Q auto PNP/NPN Complementary Enclosure material Lens material Maximum sensing distance Output type Add on input Wire insulation material Status
Level measurement CleverLevel LBFI Point level detection
Product highlights User benefi ts Safe detection of liquids, bulk solids and powders Short immersion length Capable of differentiation between foam and liquid Insensitive to adherent or sticky media Status
The sensor fulfills the specifications of the EMC requirements, if the instructions in the manual are followed.
Assembly Instructions scancontrol 2600/2650/2900/2950 1. Warnings Connect the power supply and the display-/output device in accordance with the safety regulations for electrical equipment. The power supply
GSV-1A4 M12/2 M12/2. Highlights
GSV-1A4 M12/2 M12/2 Highlights Input sensitivity: 2mV/V; 4mV/V, 2 mv/v, 1mV/V, 0.5mV/V configurable via jumpers Output signals ±10V AND 12mA+-8mA on 15 pin Sub-D Integrated half and quarter bridge completion
Ferrous metal (The sensing distance decreases with non-ferrous metal.) Power supply voltage (operating voltage range)
Description The sensors provide excellent results even with difficult-to-detect objects, e.g. small or thin parts, wires or bright metals. A variety of types cover a wide range of individual requirements
Electrical connection
Energetic reflection light scanner Dimensioned drawing We reserve the right to make changes DS_ET5_en_50121955.fm en 04-2016/10 50121955 10-30 V DC A 2 LS 500 Hz 1 1000mm Energetic reflection light scanner
ML20 Series Long-Range Miniature Sensors
Diffuse Mode See pages 486-487 Features: Cross-talk immune for 2 units Divergent beam versions available Sensing Ranges: mm, 1 m Output: NPN, PNP Thru-Beam Mode See page 489 Features: Alignment in lens
Phone: Fax: Web: -
PHOTOELECTRIC miniature sensors S3Z SERIES The high operating distances and costeffective price, makes the S3Z series in the miniature format with dimensions and standard fixing affirmed in the market,
PRODUCT INFORMATION. G6 Global Sensor. Beyond the standard Global sensor the economic way to business class
PRODUCT INFORATION G6 Global Sensor Beyond the standard Global sensor the economic way to business class GTB6 Background suppression photoelectric sensor Sensing distance 25 mm Photoelectric proximity
OFP401P0189. Color Sensor. Operating Instructions
OFP401P0189 Color Sensor Operating Instructions Last update: 23 May 2013 2 Table of contents 1. Proper Use 4 2. Safety Precautions 4 3. EC Declaration of Conformity 4 4. Technical Data 5 4.1. Connection
RoHS. Shock / vibration resistant. Short circuit proof. Flexible. . XXXX e. . XXXX e
The Sendix multiturn encoders 5862 and 5882, with SSI or RS485 interface and combined optical and magnetic sensor technology, offer a maximum resolution of 25 bits. These encoders are programmable via
Installation Sensing distance Connection Output configuration Operation mode NO Operation mode NC
Standard (thin shape) Inductive Proximity Sensor Thin shape for space saving surface mounting Direct side wall mounting for bracket-less installation Ordering Information DC 3-wire Models Installation
E2A. Ordering Information. Cylindrical Proximity Sensor. Safe Mounting with Greater Sensing Distance. E2A Cylindrical Proximity Sensor 1
Cylindrical Proximity Sensor E2A Safe Mounting with Greater Sensing Distance Ensures a sensing distance approximately 1. to 2 times larger than that of any conventional OMRON Sensor. Problems such as the
NOVOHALL Rotary Sensor non-contacting. Series RSX-7900
NOVOHALL Rotary Sensor non-contacting Series RSX-7900 Special features very robust design to extreme environmental conditions high shaft load 300 N non-contacting, magnetic measuring angles up to 360 in
RoHS. High shaft load capacity. Shock / vibration resistant
Due to their sturdy bearing construction in Safety-Lock Design, the Sendix 5000 and 5020 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up
Mounting holes. Transmitter optics. 8-pol. fem. conn. Binder Series 712 (connection to PLC) Connecting cable: cab-las4/pc or cab-4/usb or cab-4/eth
L-LAS Series L-LAS-TB-50-CL - Line laser
Pressure sensors SDE1, with display
Product range overview Method of measurement Piezoresistive pressure sensor with display Operating voltage Measured variable Pressure measuring range Pneumatic connection Type of mounting Electrical output
Slot Style Photoelectric Sensors
HPV Series GL Series Slot Style Photoelectric Sensors FE5V Series FE8V Series GL Series See pages 622-623 Useful for edge detection and end of travel applications Simplified thru-beam mounting and beam
NOVOHALL Rotary Sensor non-contacting. Series RSC2800 digital SSI, SPI, Incremental
NOVOHALL Rotary Sensor non-contacting Series RSC2800 digital SSI, SPI, Incremental The contactless sensor utilizes the orientation of a magnetic field for the determination of the measurement angle. The
Optical distance sensors. Dimensioned drawing
Optical distance sensors Dimensioned drawing en 03-2012/11 50110829 120 1400mm 18-30 V DC We reserve the right to make changes DS_ODS96BMV61400S12_en_50110829.fm Reflection-independent distance information
ADVANCED ultrasonic sensors with 2 switching outputs. Dimensioned drawing
ADVANCED ultrasonic sensors with 2 switching outputs Dimensioned drawing en 4-214/12 5124879 25 4mm 15 13mm 15-3 V DC We reserve the right to make changes DS_HTU418BX3LT4_en_5124879.fm Function largely
SENSORS. TLμ. Contrast Sensors - TLμ. All registration mark detection applications. Teach-in, Remote settings. Red/green or white LED emission
TLμ All registration mark detection applications Teach-in, Remote settings Red/green or white LED emission Various interchangeable lenses and fiber-optic models Metal housing with orientable optics and
E3S-A. Built-in Amplifier Photoelectric Sensor (Medium Size) Ordering Information. Built-in Amplifier Photoelectric Sensors. Horizontal. 7 m.
Built-in Amplifier (Medium Size) ES-A Be sure to read Safety Precautions on page 0. Ordering Information Built-in Amplifier s Red light Infrared light Sensing method Appearance Connection method Sensing
Option 2. Nil. Note 1) Option 1. Note With waterproof seal and mounting screw. With waterproof seal and mounting screw. 48 conversion adapter
Series 0-PSE00 RoHS Remote Type Multi-Channel Digital Pressure Sensor Controller How to Order Clean series 0 PSE0 0 M Input/Output specifications 0 NPN 5 outputs + Auto shift input PNP 5 outputs + Auto
Distance and Position Sensors
Distance and Position Sensors SENSORS FOR DISTANCE AND POSITION Using various measuring techniques, HYDAC offers different distance and position sensors for a wide array of mobile and stationary applications.
DIGITAL DISPLAY. for Industry Applications. Series WAY-SSI. Key-Features:
DIGITAL DISPLAY for Industry Applications Series WAY-SSI Key-Features: Content: Technical Data.2 Technical Drawing...2 Electrical Connection...3 Description...4 Order Code & Accessories...6 - WAY-SSI-S:
The World s Smallest TOF Sensor lineup with analog output type
7 New model TOF type with built-in digital panel series The World s Smallest TOF Sensor lineup with analog output type Analog output type and -control-output type The world s smallest TOF sensor Built-in
Pressure sensors SDE1, with display
Product range overview Method of measurement Piezoresistive pressure sensor with display Operating voltage Measured variable Pressure measuring range Pneumatic connection Type of mounting Electrical output
Displays Transducers. Displays and transducers
JJ Displays JJ Transducers Displays and transducers DS_Displays_and_transducers 06/2016 225 Displays and transducers Our electronic devices for flow and volume measurement are suitable for all SIKA flow
ADVANCED ultrasonic sensors with 2 switching outputs. Dimensioned drawing
Dimensioned drawing en 2-214/2 5124879 25 4mm 15 13mm 15-3 V DC We reserve the right to make changes DS_HTU418BX3LT4_en_5124879.fm Largely surface-independent function, ideal for the detection of liquids,
Online data sheet VL18-4P3140 V18 CYLINDRICAL PHOTOELECTRIC SENSORS
Online data sheet VL8-P0 V8 VL8-P0 V8 A B C D E F Illustration may differ Ordering information Type Part no. VL8-P0 605 Other models and accessories www.sick.com/v8 H I J K L M N O P Q R S T Detailed technical
Flow measurement FlexFlow PF20S Flow sensor for industrial applications
Product highlights Parallel measurement of flow and temperature Flow measurement independent of the mounting position Large measuring range up to 400 cm/s Measurement at high media temperatures up to 125
4. Sensing Distance. 2: 2 mm. 4: 4 mm 8: 8 mm 15: 15 mm 16: 16 mm 20: 20 mm
Inductive Sensor Double Sensing Distance Model Number Legend SALIENT FEATURES IP - 7, Brass Housing Short - Circuit protection Reverse Polarity Protection Shielded and Non - Shielded Prewired and Connector
Operating Instruction for Turbine-wheel Flow Meter. Model: DRS
Operating Instruction for Turbine-wheel Flow Meter Model: DRS . Contents. Contents... 2 2. Note... 3 3. Instrument Inspection... 3 4. Regulation Use... 3 5. Operating Principle... 4 6. Mechanical Connection...
Incremental Encoder with Hollow Shaft
Incremental Encoder Type RI 36-H n miniature industry encoder for high number of pulses n short mounting length n easy mounting procedure n Application e.g.: - Motors - Machine tools - Packaging Machines
JUMO PINOS L01. Calorimetric flow sensor. Brief description. Special features. Customer benefits. Data Sheet
sales@jumo.co.uk info.us@jumo.net Page 1/9 JUMO PINOS L01 Calorimetric flow sensor Brief description The JUMO PINOS L01 flow sensor serves the measuring and monitoring of flow velocities of water and aqueous
Level sensor Stainless steel version Model RLT-1000, for industrial applications
Level measurement Level sensor Stainless steel version Model RLT-1000, for industrial applications WIKA data sheet LM 50.02 Applications Level measurement of liquids in machine building Control and monitoring
GS202 Encoder Switch
GS202 Encoder Switch 20:2 encoder switch 20 encoder inputs (TTL / RS422 standard) Input signals A, /A, B, /B, Z, /Z on each encoder input 2 x 6 control inputs (HTL / PNP) 2 encoder outputs (TTL / RS422
4/20: Analog output mA (instead of V) Sturdy aluminium housing, anodized in blue. 7-pole fem. connector.
A-LAS Series A-LAS-CON1 A-LAS-CON1-4/20 - Electronic control unit for control of max. two A-LAS sensors - 100%-check of objects (tolerance band check) - Object positioning and thickness control (in μm
Thread length. 27 (40) mm. 27 (44) mm. 27 (40) mm. 34 (50) mm. 34 (49) mm. 39 (60) mm. 39 (54) mm. 44 (65) mm. 44 (59) mm
Long Distance Cylindrical. Extra long for increased protection and sensing performance triple proximity sensors for flush mounting requirements. designed and tested for extra long life. Ordering Information
Assembly Instructions scancontrol 2700/2750 (500)
Assembly Instructions scancontrol 2700/2750 (500) 1. Warnings Connect the power supply and the display-/output device in accordance with the safety regulations for electrical equipment. The power supply
GPLS-25 DATASHEET Março 2012
GPLS-25 DATASHEET Março 2012 THRU-WALL LEVEL SWITCHES GPLS 25 For liquids limit level sensing on non-conductive (glass or plastic) gauge-pipes, tubes and tank walls Miniature performance in plastic housing
Energetic diffuse reflection light scanner. Dimensioned drawing
Energetic diffuse reflection light scanner Dimensioned drawing We reserve the right to make changes 93_c3gb.fm Part No. 51 1168 1-3 V DC 5 17mm 1mm Infrared light Background suppression through appropriate
Photoelectrics Diffuse-reflective Type PA18C.D..., DC
Photoelectrics Diffuse-reflective Type PA18C.D..., DC Miniature sensor range Range: 1 m (Axial), 0.8 m (Radial) Sensitivity adjustment by potentiometer Modulated, red light 625 nm Supply voltage: to 30
E2Q4 Square Proximity Sensor
Inductive Square Slim, compact size M2 Plug-in connection Integrated short circuit and reverse polarity protection Active face positioning: Y-axis 5, X-axis 90 incremets Ordering Information DC type Connection
Pressure sensors SDE3, with display
Pressure sensors SDE3 Key features At a glance SDE3- -M plug version, plug M8x1 and M12x1 SDE3- -FQ, cable with plug Fast H-rail, wall or surface mounting Fast front panel mounting High-contrast, two-colour
Linear Position Transducer HLT 1000-R2
Linear Position Transducer HLT 1000-R2 Description: The sensor works on the principle of magnetostriction. This measuring principle determines with high accuracy the position, distance and/or speed and
Product description. At a glance. performance in a metal housing coating available Precise autocollimation optics. sensors
-2 Laser Small photoelectric sensors High-performance photoelectric sensor family with laser optics Product description At a glance performance in a metal housing coating available Precise autocollimation
A-LAS Series A-LAS-CON1-FIO A-LAS-CON1-FIO-4/20. Design. A-LAS Series Analog Laser Light Barriers. Accessories: (p. 9-14) Product name:
A-LAS Series A-LAS-CON1-FIO A-LAS-CON1-FIO-4/20 - For control of max. two optical fibers (transmitted light or reflected light) - 100%-check of objects (tolerance band check) - Object positioning and thickness
OPT2011. High-performance distance sensor. Operating Instructions
OPT2011 High-performance distance sensor Operating Instructions Status: 15/07/2013 2 Table of Contents 1. Use for Intended Purpose 4 2. Safety Precautions 4 2.1. Safety Precautions 4 2.2. Laser/LED warning
LS 6600 Technical Datasheet
Technical Datasheet Switch for level detection and dry-run protection Optimised sensor geometry, easy to clean Measures products with dielectric constant > 1.5 Small and compact KROHNE 06/2011-4001367301
Miniature Inductive Prox TL-W
Miniature Inductive Prox Subminiature, Flat-Pack DC Sensor Fits Tight Spaces Watertight construction conforms to IP67 Space-saving mounting area, as small as 10 x 27 mm ( 0.39 x 1.06 in), is ideal for
PRELIMINARY EAMH 58 B / C - 63 A / D / E BIT PARALLEL - SSI SOLID SHAFT MULTITURN ABSOLUTE ENCODER ORDERING CODE BIT PARALLEL
EAMH 58 B / C - 63 A / D / E BIT PARALLEL - SSI SOLID SHAFT MULTITURN ABSOLUTE ENCODER MAIN FEATURES Industry standard multiturn absolute encoder for factory automation applications. Optical sensor technology
Pneumatic Control/Feedback
897 /Feedback Type 897 can be combined with... Compact design Integrated pilot valve with manual override Internal control air routing Automatic end position adjustment With ATEX II cat. G/D and cat. D/G
MPS-32. Pressure Sensors MPS-32 2-Color Panel Mount. Features. Green Display. MPS-32 Programming Options
Features MPS- Green Display MPS-VN-PC ure Sensors Features ure Ranges: Vacuum ure 0 to -0 inhg Positive ure 0 to 5 PSI Sensor : NPN or PNP Open Collector Transistor, 0VDC, 5mA Optional Analog, to 0mA Optional
Absolute Encoder Multiturn
Absolute Encoder Multiturn Features Resolution: Singleturn: up to 16,384 (14 Bit) steps per revolution Multiturn: up to 16,777,216 (24 Bit) revolutions Interface: SSI (synchron serial interface) or BiSS
Features. Sensing range 50 mm mm... Type of light. Light source 3) Wave length. Adjustment 2) PL80A.
-3-3 Detailed technical data Features WT18-3 WT18-3 Ex WL18-3 WL18-3 Ex WS/WE18-3 Reliable object detection for demanding applications Sensor principle Photoelectric proximity sensor Through-beam photoelectric
Linear Position Transducer HLT 1000-R2
7 Linear Position Transducer HLT 1000-R2 Description: The sensor works on the principle of magnetostriction. This measuring principle determines with high accuracy the position, distance and/or speed and
Fixed mount CCD bar code reader NFT Specification Ver. 1.0
Fixed mount CCD bar code reader NFT-2100 Specification Ver. 1.0 Version Control number : Model : SS05011 NFT-2100 Version Date Revisions Description Ver 1.0 2005/06/09 - First registration 1. About this
DATA SHEET ABSOLUTE ROTARY ENCODER SSI
Main Features - Compact and Robust Industrial Model - Synchronous Serial Interface SSI (RS-422 / TTL) - Optional Incremental Output RS-422 or Push-Pull (TTL, HTL compatible) - Standard 59 mm Housing -
ULTRASONIC. Proximity Sensors. Series UX micro. Key-Features:
ULTRASONIC Proximity Sensors Series UX micro Key-Features: Content: Technical Data...2 Detection Beam.4 Technical Drawing.4 Connection & Applications...5 Order Code & Accessories...6 - Very small dimensions
POSICHRON PCQA Mounting Sets
PCQA Mounting Sets Mounting set PCQA-BFS1 with mounting clamps Isolation sleeve 46 Isolation strip Mounting clamp P 58 Option -BFW Mounting brackets for PCQA22 and PCQA24 Note: The option -BFW can only
14 Pressure Measurement. Measuring Devices Description Pressure range Connection Device Page
Measuring Devices Pressure range Connection Device Page Digital display mounting, für niedrige Drücke 0 2. mbar / 2. bar 4 mm tube MPV, MPA.02 portable, hand-operated 0 1 mbar / 10 bar 4 mm tube MHA.03
Online data sheet. TiM TiM5xx 2D LIDAR SENSORS
Online data sheet TiM571-501 TiM5xx TiM571-501 TiM5xx A B C D E F H I J K L M N O P Q R S T Detailed technical data Features Field of application Light source Ordering information Type Part no. TiM571-501
Cylindrical Proximity Sensor
Cylindrical Proximity Sensor A New Series of Easy-to-use and Tough Models with a Yellow Indicator New series of TL-X2C1-GE models with improved performance over the previous TL-X-E models. Also, in addition
sks-15/cd Extract from our online catalogue: Current to:
Extract from our online catalogue: sks-15/cd Current to: 2018-09-13 microsonic GmbH / Phoenixseestraße 7 / 44263 Dortmund / Germany / T +49 231 975151-0 / F +49 231 975151-51 / E info@microsonic.de microsonic
Thread length (overall length)
Cylindrical Proximity Sensor E2A Safe Mounting with Greater Sensing Distance Ensures a sensing distance approximately 1. to 2 times larger than that of any conventional OMRON Sensor. Problems such as the
Draw wire sensors, draw wire sensors for displacement, position
Draw wire sensors, draw wire sensors for displacement, position Sensors based on potentiometer and encoder, for industrial and OEM applications for measurement of lengths, stroke, displacement, position,
Sturdy aluminium housing, aodized in black. LED red (-): Measuring value < lower tolerance threshold
L-LAS Series L-LAS-LT-85-RA-CL (Reduced Amplification) - Operates in an angle of total reflection - Suitable für high-glossy objects (e.g. glass) - Line laser
Compact Sensors - S8 Series. Compact size and high performance for the most challenging detection applications
Compact size and high performance for the most challenging detection applications Compact dimensions (14x42x25 mm) Background suppression for transparent and shiny objects High speed contrast sensor up
EAM 58 B / C - 63 A / D / E BIT PARALLEL - SSI
EAM 58 B / C - 63 A / D / E BIT PARALLEL - SSI SOLID SHAFT MULTITURN ABSOLUTE ENCODER MAIN FEATURES Industry standard multiturn absolute encoder for factory automation applications. Optical sensor technology
BTL6-A_10-M -A1-S115. Data Sheet. english
BT6-A_10-M -A1-S11 english Data Sheet Balluff GmbH Schurwaldstrasse 9 76 Neuhausen a.d.f. Germany Phone +49 (0) 71 8/1-0 Fax +49 (0) 71 8/0 10 Servicehotline +49 (0) 71 8/1-70 E-Mail: balluff@balluff.de
Mounting. possibilities. Transmitter optics. 8-pole fem. connector Binder Series 712 (PLC) Connecting cable: cab-las8/sps or cab-las8/sps-w
L-LAS Series L-LAS-TB-50 - Laser line sensor, 1 mw, class 2 laser product - Visible laser line (red light 670 nm), 50 mm light curtain - Measuring range typ. 48 mm - Resolution typ. 30 μm - Integrated
ML17 Series Tru-Vue TM Sensors
ML7 Series Tru-Vue TM Sensors Diffuse Mode with Background Suppression See page 44 Features: Ver low color sensitivit Tamper-proof housing with no eternal adjustments Sensing Range: 5 mm Output: 4-in-
Operating Instructions for Low Volume Rotating Vane Flow Meter. Model: DPL-1P... DPL-1V... DPL-1E...
Operating Instructions for Low Volume Rotating Vane Flow Meter Model: DPL-1P... DPL-1V... DPL-1E... 1. Contents 1. Contents... 2 2. Note... 3 3. Instrument Inspection... 3 4. Regulation Use... 3 5. Operating
More Precision. optoncdt // Laser displacement sensors (triangulation)
More Precision optoncdt // Laser displacement sensors (triangulation) 10 Smart laser triangulation displacement sensor optoncdt 1420 312Hz 375Hz 1000Hz Ideal for serial and OEM applications Compact design