Distribution Substation Manual (DSM) Section 6: Miscellaneous
|
|
|
- Bonnie Park
- 5 years ago
- Views:
Transcription
1 Distribution Substation Manual (DSM) Section 6: Miscellaneous Standard Number: HPC-5DA
2 Document Control Author Name: Viswa Easwaran Position: Standards Engineer Document Owner Name: Justin Murphy (May also be the Process Owner) Position: Manager Asset & Works Approved By * Name: Justin Murphy Position: Manager Asset & Works Date Created/Last Updated October 2013 Review Frequency ** 5 yearly Next Review Date ** October 2018 * Shall be the Process Owner and is the person assigned authority and responsibility for managing the whole process, end-to-end, which may extend across more than one division and/or functions, in order to deliver agreed business results. ** Frequency period is dependent upon circumstances maximum is 5 years from last issue, review, or revision whichever is the latest. If left blank, the default shall be 1 year unless otherwise specified. Revision Control Revision Date Description 0 14/10/2013 Original Issue Manager Assets & Works Manager Engineering Services STAKEHOLDERS The following positions shall be consulted if an update or review is required: Manager Engineering Systems Planning DM# Page 2 of 60 Print Date 14/10/2013
3 TABLE OF CONTENTS 1 PURPOSE SCOPE CONTENTS Index of Drawings REFERENCE DOCUMENT REVISION INFORMATION... 7 DM# Page 3 of 60 Print Date 14/10/2013
4 1 PURPOSE 2 SCOPE This Standard specifies the arrangements for Miscellaneous Items in relation to Distribution Substations used on Horizon Power Distribution networks. This Standard supersedes the Western Power Document (record DM# ] previously in use by Horizon Power since disaggregation. This Standard covers the following requirements: Substation Conduits ; Indoor Substation Exhaust Fans ; Schneider RM6 Switchgear Indoor Installation; Transformer Lifting Details ; Indoor Substation Trenching ; Outdoor Earthing ; Indoor Earthing ; and Screening. DM# Page 4 of 60 Print Date 14/10/2013
5 3 CONTENTS 3.1 Index of Drawings Drawing Number Drawing Title DSM-6-01 Substation Ducting Cross Sections - Civil Requirements DSM-6-02 Substation Exhaust Fans - Details DSM-6-03 Substation Exhaust Fan Sub - Distribution Board For Indoor Substation - Schematic DSM-6-04 Schneider RM6 Switchgear - Indoor Metering Switchgear Support Details DSM-6-05 Transformer Lifting Lug Details DSM-6-06 Schneider RM6 Connection Details DSM-6-07 Schneider RM6 Indoor Support Support Beam Fabrication Details DSM-6-08 Moved to DSM 7 DSM-6-09 Moved to DSM 7 DSM-6-10 Indoor Substation trench Details DSM-6-11 Outdoor Substation Earthing Requirements DSM-6-12 Indoor Substation Earthing Requirements DSM-6-13 Outdoor Substation Screening Arrangements DM# Page 5 of 60 Print Date 14/10/2013
6 4 REFERENCE DOCUMENT The following Reference Documents have been used to prepare this Standard: Doc Ref. Document Title Record No DM# AS AS/NZS AS 3008 Substations & high voltage installations Wiring Rules Cables for Alternating Voltages up to and Including 0.6/1 kv Distribution Substation Manual - Section 6 Miscellaneous (Superseded) Publisher SAI Global SAI Global SAI Global Horizon Power HPC-5DC HPC-5DA HPC-5DA HPC-5DA HPC-5DA HPC-5DA HPC-9DJ Distribution Design Manual: Volume Horizon Power Distribution Substation Manual Sect 1 Customer Supply Arrangements Distribution Substation Manual Sect 2 High Voltage Network Arrangements Distribution Substation Manual Sect 3 Substation Arrangements Distribution Substation Manual Sect 4 Equipment Installation Guide Distribution Substation Manual Sect 5 Substation Fire Protection Horizon Power Horizon Power Horizon Power Horizon Power Horizon Power Substation Installation Requirements Horizon Power Western Australian Distribution Connections Manual (WADCM) Western Australian Electrical Requirements Western Power and Horizon Power Office of Energy safety DM# Page 6 of 60 Print Date 14/10/2013
7 5 REVISION INFORMATION (Informative) Horizon Power has endeavoured to provide standards of the highest quality and would appreciate notification if any errors are found or even queries raised. Each Standard makes use of its own comment sheet which is maintained throughout the life of the standard, which lists all comments made by stakeholders regarding the standard. A comment sheet found in DM: , can be used to record any errors or queries found in or pertaining to this standard, which can then be addressed whenever the standard gets reviewed. Date Rev No. Notes 23/09/ Original Issue DM# Page 7 of 60 Print Date 14/10/2013
8 DM# Page 8 of 60 Print Date 14/10/2013
9 DM# Page 9 of 60 Print Date 14/10/2013
10 DM# Page 10 of 60 Print Date 14/10/2013
11 DM# Page 11 of 60 Print Date 14/10/2013
12 DM# Page 12 of 60 Print Date 14/10/2013
13 DM# Page 13 of 60 Print Date 14/10/2013
14 DM# Page 14 of 60 Print Date 14/10/2013
15 DM# Page 15 of 60 Print Date 14/10/2013
16 DM# Page 16 of 60 Print Date 14/10/2013
17 DM# Page 17 of 60 Print Date 14/10/2013
18 DM# Page 18 of 60 Print Date 14/10/2013
19 DM# Page 19 of 60 Print Date 14/10/2013
20 DM# Page 20 of 60 Print Date 14/10/2013
21 DM# Page 21 of 60 Print Date 14/10/2013
22 DM# Page 22 of 60 Print Date 14/10/2013
23 DM# Page 23 of 60 Print Date 14/10/2013
24 DM# Page 24 of 60 Print Date 14/10/2013
25 DM# Page 25 of 60 Print Date 14/10/2013
26 DM# Page 26 of 60 Print Date 14/10/2013
27 DM# Page 27 of 60 Print Date 14/10/2013
28 DM# Page 28 of 60 Print Date 14/10/2013
29 DM# Page 29 of 60 Print Date 14/10/2013
30 DM# Page 30 of 60 Print Date 14/10/2013
31 DM# Page 31 of 60 Print Date 14/10/2013
32 DM# Page 32 of 60 Print Date 14/10/2013
33 DM# Page 33 of 60 Print Date 14/10/2013
34 DM# Page 34 of 60 Print Date 14/10/2013
35 DM# Page 35 of 60 Print Date 14/10/2013
36 DM# Page 36 of 60 Print Date 14/10/2013
37 DM# Page 37 of 60 Print Date 14/10/2013
38 DM# Page 38 of 60 Print Date 14/10/2013
39 DM# Page 39 of 60 Print Date 14/10/2013
40 DM# Page 40 of 60 Print Date 14/10/2013
41 DM# Page 41 of 60 Print Date 14/10/2013
42 DM# Page 42 of 60 Print Date 14/10/2013
43 DM# Page 43 of 60 Print Date 14/10/2013
44 DM# Page 44 of 60 Print Date 14/10/2013
45 DM# Page 45 of 60 Print Date 14/10/2013
46 DM# Page 46 of 60 Print Date 14/10/2013
47 DM# Page 47 of 60 Print Date 14/10/2013
48 DM# Page 48 of 60 Print Date 14/10/2013
49 DM# Page 49 of 60 Print Date 14/10/2013
50 DM# Page 50 of 60 Print Date 14/10/2013
51 DM# Page 51 of 60 Print Date 14/10/2013
52 DM# Page 52 of 60 Print Date 14/10/2013
53 DM# Page 53 of 60 Print Date 14/10/2013
54 DM# Page 54 of 60 Print Date 14/10/2013
55 DM# Page 55 of 60 Print Date 14/10/2013
56 DM# Page 56 of 60 Print Date 14/10/2013
57 DM# Page 57 of 60 Print Date 14/10/2013
58 DM# Page 58 of 60 Print Date 14/10/2013
59 DM# Page 59 of 60 Print Date 14/10/2013
60 DM# Page 60 of 60 Print Date 14/10/2013
Manual: Distribution Substation Manual (DSM) Section 4: Equipment Installation Guide
Manual: Distribution Substation Manual (DSM) Section 4: Equipment Installation Guide Standard Number: HPC-5DA-07-0004-2012 Document Control Author Name: Viswa Easwaran Position: Standards Engineer Document
Manual: Distribution Substation Manual (DSM) Section 5: Substation Fire Protection Requirements
Manual: Distribution Substation Manual (DSM) Section 5: Substation Fire Protection Requirements Standard Number: HPC-5DA-07-0005- Document Control Author Name: Viswa Easwaran Position: Standards Engineer
Manual: Distribution Substation Manual (DSM) Section 1: Customer Supply Arrangements
Manual: Distribution Substation Manual (DSM) Section 1: Customer Supply Arrangements Standard Number: HPC-5DA-07-0001-2012 Document Control Author Name: Viswa Easwaran Position: Standards Engineer Document
HPC-9DJ
Guideline General Application of Switching Devices on Distribution Networks Standard Number: HPC-2AA-07-0001-2012 Document Control Author Name: Anthony Seneviratne Position: Senior Standards Engineer Document
Network Asset Design Standard HV SUBSTATION FEEDER EXIT CIRCUITS ISOLATION POLICY
Network Asset Design Standard HV SUBSTATION FEEDER EXIT CIRCUITS ISOLATION POLICY Original Issue: September 2007 Prepared by: Lee Chan & Rob Rogerson This Revision: 0 October 2007 Date For Next Review:
Distribution Substation Manual (DSM) Section 8 Distribution Automation
(DSM) Section 8 Distribution Automation July 2010 Document release information Client Project name Western Power Distribution Substation Manual Document number 8 Document title Revision status Distribution
MESP TECHNICAL SPECIFICATION FOR SCADA CABLING IN SUBSTATIONS
Engineering Specification Electrical Networks MESP 081000-01 TECHNICAL SPECIFICATION FOR SCADA CABLING IN Version: 1 Issued: March 2014 Owner: Electrical Networks Asset Manager Approved By: George Marulli
Specification Voltage Limiting Device
Engineering Specification Electrical Networks L1-CHE-SPE-152 Specification Voltage Limiting Device Version: 1 Issued: 20 th April 2018 Owner: Chief Engineer Approved By: Andrew Russack Head of Engineering,
ECP NORTROLL CABLETROLL 2350 FPI INSTALLATION AND COMMISSIONING PROCEDURE
Network(s): Summary: ENGINEERING COMMISSIONING PROCEDURE ECP 11-0521 NORTROLL CABLETROLL 2350 FPI INSTALLATION AND COMMISSIONING PROCEDURE EPN, LPN, SPN This document details the installation, testing
EDS SCADA NUMBERING SYSTEM
Document Number: EDS 05-9007 Network(s): Summary: EPN, LPN, SPN ENGINEERING DESIGN STANDARD EDS 05-9007 SCADA NUMBERING SYSTEM This standard describes the system for numbering SCADA wiring within switchgear
MTM DESIGN PRACTICE NOTE 110V AC SURGE PROTECTION IN SIGNAL EQUIPMENT ROOMS AND TRACKSIDE ZONE BOXES
SURGE PROTECTION IN SIGNAL Approval Amendment Record Approval Date Version Description 11/05/2016 1 Initial Issue under MTM PRINTOUT MAY NOT BE UP-TO-DATE; REFER TO METRO INTRANET FOR THE LATEST VERSION
CAPABILITY STATEMENT. A full list of our services.
CAPABILITY STATEMENT A full list of our services. About Us MVLV Power Solutions Pty Ltd is a privately owned Western Australian based company, specialising in the Design and Manufacture of Electrical Switchboards
Request for Qualifications
Request for Qualifications May 4, 2017 Request for Qualifications Quality information Prepared by Checked by Approved by Jessica R. Chevreaux Program Manager Revision History Revision Revision date Details
EDS MW AND MVAR TRANSDUCER CONNECTION
Document Number: EDS 05-5001 Network(s): Summary: ENINEERIN DESIN STANDARD EDS 05-5001 MW AND MVAR TRANSDUCER CONNECTION EPN, LPN, SPN This standard details the convention to be used when wiring MW and
1.0 Executive Summary
Statement of Work - 1 - Power and Cooling Assessment for Data Center Professional Services Service 1.0 Executive Summary Table of Contents 1.0 Executive Summary 2.0 Features & Benefits 3.0 Details of Service
ECS LUCY GEMINI 3 CONFIGURATION PROCEDURE
Document Number: ECS 05-9541 Network(s): Summary: ENGINEERING CONSTRUCTION STANDARD ECS 05-9541 LUCY GEMINI 3 CONFIGURATION PROCEDURE EPN, LPN, SPN This document details the configuration procedure for
SOUTHERN COMPANY DISTRIBUTION INTERCONNECTION POLICY
SOUTHERN COMPANY DISTRIBUTION INTERCONNECTION POLICY Inverter Based Generators 25 kw and This document contains the interconnection requirements for inverter based generators, 25 kw and smaller, that operate
Small Generator Interconnection Facilities Study Report. Completed for. ( Interconnection Customer ) Proposed Interconnection Pavant substation
Small Generator Interconnection Facilities Study Report Completed for ( Interconnection Customer ) Proposed Interconnection Pavant substation Original report dated February 17, 2016 Revised March 11, 2016
DESIGN PRACTICE NOTE NEGATIVE BUSBAR SHUNTS
Approval Amendment Record Approval Date Version Description 27/05/2013 1 Initial issue under MTM. PRINTOUT MAY NOT BE UP-TO-DATE; REFER TO METRO INTRANET FOR THE LATEST VERSION Page 1 of 6 Table of Contents
EOS LUCY SABRE 'A' RANGE SWITCHGEAR
Document Number: EOS 03-0027 Network(s): Summary: ENGINEERING OPERATION STANDARD EOS 03-0027 LUCY SABRE 'A' RANGE SWITCHGEAR EPN, LPN, SPN This standard details the installation, commissioning and operation
Presented by: Oscar Araujo Photovoltaic Solutions Manager. 4 th Canadian German Solar PV Conference March 2 nd 2011
Photovoltaic Solutions Make the most of your solar PV project Presented by: Oscar Araujo Photovoltaic Solutions Manager 4 th Canadian German Solar PV Conference March 2 nd 2011 Agenda Solutions for Renewable
ENGINEERING AND SERVICES FIRM THAT SPECIALIZES IN HYDROELECTRIC POWER AND CONTROL SYSTEM DESIGN, OUR TEAM OF PROFESSIONALS HAVE WORKED TOGETHER
smallhydro PRIME ENGINEERING LIMITED IS AN ELECTRICAL ENGINEERING AND SERVICES FIRM THAT SPECIALIZES IN HYDROELECTRIC POWER AND CONTROL SYSTEM DESIGN, IMPLEMENTATION AND MAINTENANCE. OUR TEAM OF PROFESSIONALS
SPI PowerNet requirements for the non-contestable Interface Works at Deer Park Terminal Station
SPI PowerNet requirements for the non-contestable Interface Works at Deer Park Terminal Station SPI PowerNet Reference: ZD23 Version: 1.1 Issue date: 15 May 2014 Contents 1 Scope... 3 2 Deer Park Terminal
UNDERGROUND CONSTRUCTION MANUAL SERVICES
UNDERGROUND CONSTRUCTION MANUAL ack to MAIN INDEX Go to SECTION INDEX CONSTRUCTION DESCRIPTION DWG CONSTRUCTION DESCRIPTION DWG Construction code guide - Underground service from overhead system 53 SERVICE
Sapphire Wind Farm 330/33kV Substation
Signature projects: Projects: Project Edison AusNet Sapphire Wind Farm 330/33kV Substation TransGrid Zinfra constructed 330/33kV substation and transmission line as part of the cut in works for the Sapphire
ECP SECONDARY SUBSTATION COMMISSIONING PROCEDURE
Document Number: ECP 11-0501 Network(s): Summary: ENGINEERING COMMISSIONING PROCEDURE ECP 11-0501 SECONDARY SUBSTATION COMMISSIONING PROCEDURE EPN, LPN, SPN This procedure details the end-to-end process
Package Substation. The efficient solution for your electrical distribution network
Package Substation The efficient solution for your electrical distribution network Why Prefabricated Substations? Biosco, safe and effective substations Safety: A fully tested electrical equipment > Much
EBB PILOT FOR THE LIVE CONNECTION OF UNMETERED EQUIPMENT TO OVERHEAD LINES
Network(s): Summary: ENGINEERING BULLETIN EBB 08-0061 PILOT FOR THE LIVE CONNECTION OF UNMETERED EQUIPMENT TO OVERHEAD LINES EPN, SPN This bulletin provides a framework for the pilot scheme for unmetered
Design Guidelines for SCADA & DSA
Design Guidelines for SCADA & 28 th February 2017 28 FEBRUARY 2017 ISSUE 4 PREPARED BY: PRINCIPAL ENGINEER SCADA & MANAGER AUTHORISED BY: MANAGER SECONDARY SYSTEMS DOCUMENT NUMBER: ISSUE 4 This plan is
Installation Service. 1.0 Executive Summary. Factory Trained Technician Train Customer Support Staff On Basic Operation Of The Equipment
Installation Service Statement of Work Start-up Service for Cooling Start-up - 1 - Service for Cooling Service 1.0 Executive Summary Table of Contents 1.0 Executive Summary 2.0 Features & Benefits 3.0
DESIGN STANDARD DS 28
Assets Delivery Group Engineering DESIGN STANDARD DS 28 VERSION 1 REVISION 7 JANUARY 2018 FOREWORD The intent of Design Standards is to specify requirements that assure effective design and delivery of
ELECTRICAL SAFETY INSPECTION REPORT
ELECTRICAL SAFETY INSPECTION REPORT CHITTAGONG FASHION WEAR LTD. SOUTH HALISHAHAR, CHITTAGONG, BANGLADESH Factory List: 1. Chittagong Fashion Wear Ltd. 2. H & W Apparels Inspected on May 5, 2014 SUMMARY
EDS LONDON 33KV DISTRIBUTION NETWORK DESIGN AND CUSTOMER SUPPLIES
Network(s): Summary: ENGINEERING DESIGN STANDARD EDS 08-0150 LONDON 33KV DISTRIBUTION NETWORK DESIGN AND CUSTOMER SUPPLIES LPN This standard provides guidelines for the development of the 33kV distribution
MESP TECHNICAL SPECIFICATION FOR A RECTIFIER UNIT CONTROL & PROTECTION SYSTEM FOR USE IN THE 1500V DC TRACTION SYSTEM
Engineering Specification Electrical Networks TECHNICAL SPECIFICATION FOR A RECTIFIER UNIT CONTROL & PROTECTION SYSTEM FOR USE IN THE 1500V Version: 1 Issued: March 2014 Owner: Electrical Networks Asset
EOS SCHNEIDER RINGMASTER 'C' RANGE SWITCHGEAR
Document Number: EOS 03-0018 Network(s): Summary: ENGINEERING OPERATION STANDARD EOS 03-0018 SCHNEIDER RINGMASTER 'C' RANGE SWITCHGEAR EPN, LPN, SPN This standard details the installation, commissioning
SECTION ELECTRIC METERING
SECTION 26 27 13 ELECTRIC METERING SPEC WRITER NOTES: Use this section only for NCA projects Delete between //----// if not applicable to project. Also delete any other item or paragraph not applicable
Recording and Reporting of High Voltage and Low Voltage Switching
1 SCOPE This document details the procedures to be adopted prior to, during, and on completion of Switching operations, and details the manner in which HV and LV Switching shall be recorded in order to
1.0 Executive Summary. 2.0 Features and Benefits
Table of Contents 1.0 EXECUTIVE SUMMARY 2.0 FEATURES AND BENEFITS 3.0 DETAILS OF SERVICE 4.0 Deliverable 5.0 Exclusions 6.0 SCOPE OF RESPONSIBILITY 7.0 PROJECT WORK DETAILS 8.0 ORDERING INFORMATION 9.0
MESP TECHNICAL SPECIFICATION FOR 22 kv METAL ENCLOSED SWITCHGEAR
Engineering Specification Electrical Networks TECHNICAL SPECIFICATION FOR 22 kv Version: 2 Issued: 19 th December 2016 Owner: Chief Engineer Approved By: Andrew Russack Head of Engineering - Electrical
Engineering Recommendation G87 Issue
PRODUCED BY THE OPERATIONS DIRECTORATE OF ENERGY NETWORKS ASSOCIATION Engineering Recommendation G87 Issue 2-2015 Guidelines for the Provision of Low Voltage Connections to Multiple Occupancy Buildings
MESP MODULAR SUBSTATION USER REQUIREMENTS
Engineering Specification Electrical Networks MODULAR SUBSTATION USER Version: 2 Issued: November 2015 Owner: Head of Engineering/Electrical Approved By: Head of Engineering/Electrical PRINTOUT MAY NOT
UNDERGROUND HV SUBSTATION DESIGN
3 for 2 Bundle Offer. SGD 2440 each for Team of 3! Topics Covered Underground Substations Overview Planning New Underground Substations S/S Design Overview Expert Course Faculty Leader In his 30 years
P216. Condenser fan speed controller. Product bulletin. Features
P216 Condenser fan speed controller Product bulletin These controllers are designed for speed variation of single phase motors, especially for fan speed control on air cooled condensers. Head pressure
Electric T&D Capacity, Reliability, UG Asset Bulletin
UTILITY OPERATIONS FOR IMMEDIATE RELEASE Date: 11/01/04 Title: Check all appropriate boxes X Electric T&D Capacity, Reliability, UG Asset Bulletin Secondary Spot Network System Requirements for Distributed
Memorandum. This memorandum requires Board action. EXECUTIVE SUMMARY
California Independent System Operator Corporation Memorandum To: ISO Board of Governors From: Keith Casey, Vice President, Market & Infrastructure Development Date: May 21, 2014 Re: Decision on interconnection
Our Power & Control line of Business offers solutions that safely distribute power to your home or business. Our product range includes Low/Medium
Our Power & Control line of Business offers solutions that safely distribute power to your home or business. Our product range includes Low/Medium Voltage Panels and Enclosures designed and built with
Name: Denis Deschamps Position: Maintenance Business Process Specialist Department: Base Metals
MPROC-2008 207-08-07 of 8 Training Code (If applicable): Document Owner: Name: Denis Deschamps Position: Maintenance Business Process Specialist Department: Base Metals Table of Contents.0 PURPOSE... 2
SECTION 5 -- EQUIPMENT LAYOUT & EQUIPMENT ENVIRONMENTS
SECTION 5 -- EQUIPMENT LAYOUT & EQUIPMENT ENVIRONMENTS CONTENTS PAGE 1. GENERAL... 5-1 1.1. Introduction... 5-1 1.2. Equipment Layout Requirements... 5-1 2. EQUIPMENT FRAMES... 5-2 2.1. Introduction...
Document C0. Use for:
Date: July 27, 2015 Document C0 Use for: Connection of Electric Generation that will operate with an Open Transition (Category 1) between the Ameren System and the Generator or operate with a Synchronized
INSTRUCTION MANUAL A141 High Level Audible Warning System
24V DC (18V to 30V DC range) 115 or 230VAC (90V to 264V AC range) Operating Temp: -20 to +55 C IP Rating: IP65 Marking: 3) Installation Requirements 1) Introduction The A141 high level audible warning
Engineering Document Control
Division / Business Unit: Function: Document Type: Enterprise Services All Disciplines Procedure Engineering Document Control Applicability ARTC Network Wide SMS Publication Requirement Internal / External
Distribution Code Review Panel Protection Engineer assessment Working Group. Draft Document for
Distribution Code Review Panel Protection Engineer assessment Working Group Draft Document for Procedure for Assessment of Protection Relay Testing Engineers INTRODUCTION Electrical Protection system testing
Title System Substation Commissioning Tests. Reference Number PCP 07 - (RIC Standard: EP SP)
Discipline Engineering Standard - NSW Category Electrical Title s Reference Number PCP 07 - (RIC Standard: EP 99 00 00 02 SP) Document Control Status Date Prepared Reviewed Endorsed Approved Mar 05 Standards
SECTION (16410) - ENCLOSED SWITCHES AND CIRCUIT BREAKERS
SECTION 26 28 16 (16410) - ENCLOSED SWITCHES AND CIRCUIT BREAKERS PART 1 GENERAL 1.01 SUMMARY A. Section Includes: 1. Individually Mounted Switches and Circuit Breakers Used for the following: a. Service
MF1 MOA4 S50. Contactless Chip Card Module Specification. This document gives specifications for the product MF1 MOA4 S50.
Rev. 3.2 19 December 2006 Product data sheet 083032 PUBLIC 1. General description 1.1 Addendum This document gives specifications for the product. The is the integrated circuit MF1 ICS50 in the package
Guideline for the Connection of Micro Embedded Generators to the TasNetworks Distribution Network
Tasmanian Networks Pty Ltd ABN 24 167 357 299 Guideline for the Connection of Micro Embedded Generators to the TasNetworks Distribution Network (AS4777 Compliant) NG R PD 09 Version 2.0 July 2014 TABLE
Remotely Operable 1500V DC Disconnector & Short-Circuit Switch Assembly
Specification Electrical Networks L1-CHE-SPE-128 Remotely Operable 1500V DC Disconnector & Short-Circuit Switch Assembly Version: 1 Issued: February 2016 Owner: Head of Engineering - Electrical Approved
Goddard Procedures and Guidelines
Goddard Procedures and Guidelines DIRECTIVE NO.: GPG 1410.1 APPROVED BY Signature: Original Signed by NAME: A. V. Diaz TITLE: Director Responsible Office: 230/Logistics Management Division Title: DIRECTIVES
Strategic Planning Electrical, Lighting and Communications October 24 th, 2017
Strategic Planning Electrical, Lighting and Communications October 24 th, 2017 Strategic Planning Process of defining an organization s strategy or direction, and making decisions on allocating its resources
PAN INDIA INFRAPROJECTS PRIVATE LIMITED VENDOR REGISTRATION FORM. Enlistment of contractor for Electrical / Civil / Miscellaneous works
Doc No. PUR/VRF/SERVICES Rev. No. 0 Rev. Date. 0 VENDOR REGISTRATION FORM Enlistment of contractor for Electrical / Civil / Miscellaneous works Please e-mail or print & fax the completed form to: Head
STCP Amendment Proposal Form
STCP Amendment Proposal Form PA036 1. Title of Amendment Proposal STCP 09-2 Incorporation material currently within SPT SCS and making standard for both TOs. 2. Description of the Proposed Amendment (mandatory
ADDENDUM # 3. To prospective Proposers on RFI # 55144: Solar Energy Development and Community Solar at JFK Long-Term Parking Lot:
PROCUREMENT DEPARTMENT 4 WORLD TRADE CENTER 150 GREENWICH STREET, 21ST FL. NEW YORK, NY 10007 12/7/2018 ADDENDUM # 3 To prospective Proposers on RFI # 55144: Solar Energy Development and Community Solar
Network Configuration Document Selection for New Substations Framework
Network Configuration Document Selection for New Substations Current version: 20/06/2018 EXTERNAL USE Page 1 of 14 Table of contents 1. Introduction... 3 1.1 Purpose... 3 1.2 Scope... 3 1.3 References...
Uncontrolled document when printed. Large Customer Connection Manual
Large Customer Connection Manual Table of Contents 1. Foreword... 1 2. Purpose and Scope... 1 3. Definitions, Abbreviations and Acronyms... 2 4. References... 4 5. Network Connection Principles... 5 6.
SECTION APPENDIX B SFC DOCUMENT SUBMITTAL SCHEDULE
SECTION 16262 - APPENDIX B SFC DOCUMENT SUBMITTAL SCHEDULE PART 1 - GENERAL 1.01 RELATED SECTIONS A. Section 01300 Submittals B. Section 16262 Static Frequency Converter C. Section 16262A Appendix A SFC
AWS D16.2M/D16.2:2007 An American National Standard. Guide for Components of Robotic and Automatic Arc Welding Installations
An American National Standard Guide for Components of Robotic and Automatic Arc Welding Installations An American National Standard Approved by the American National Standards Institute August 25, 2006
UL TEST REPORT AND PROCEDURE
Issue Date: 2014-01-24 Page 1 of 16 Report Reference # E135803-A74-UL UL TEST REPORT AND PROCEDURE Standard: Certification Type: CCN: Product: Model: UL 60950-1, 2nd Edition, 2014-10-14 (Information Technology
DRAWING INDEX UNIVERSITY OF NEW MEXICO VR - CLASSROOM UNIVERSITY OF NM CAMPUS MILTON HALL, ROOM 155
3 4 5 OWNER: DRAWING INDEX UNIVERSITY OF NEW MEXICO COVER G-SHEETS CONTACT: NIVIA FRANCO G00 COVER SHEET CONSULTANTS: CIVIL ENGINEERING ARCHITECTURAL A D0 FIRST FLOOR DIMENSIONED PLAN & WALL PARTITION
Substation Workshop. 7 th February 2018
Substation Workshop 7 th February 2018 1 Agenda Welcome and Introductions Antony White Substation Design Overview Andy Moore Question & Answer Session Break 1500kVA Transformers James Devriendt & Andy
EDS KV, GRID AND PRIMARY SYSTEM PROTECTION AND CONTROL SCHEMES
Network(s): Summary: ENGINEERING DESIGN STANDARD EDS 05-0001 132KV, GRID AND PRIMARY SYSTEM PROTECTION AND CONTROL SCHEMES EPN, LPN, SPN This engineering design standard describes the requirements for
Standards Update Notice (SUN) Issued: April 25, 2017
Standard Information Standard Number: UL 1951 Standard Name: Electric Plumbing Accessories Standard Edition and Issue Date: 2 nd Edition Dated July 22, 2011 Date of Revision: February 21, 2017 Date of
TruRead Plug and Play Pulse Splitter Type L4SK0. Document Version 1.02
Type L4SK0 Document Version 1.02 Introduction TruRead Plug and Play Pulse Splitter This document describes the requirements and considerations for installation of the L4SK0 Plug and Play Passive Pulse
EDS LV CUSTOMER UNMETERED SUPPLIES
Document Number: EDS 08-2102 Network(s): Summary: ENGINEERING DESIGN STANDARD EDS 08-2102 LV CUSTOMER UNMETERED SUPPLIES EPN, LPN, SPN This standard details the requirements for unmetered single-phase
CompactBlock Guard I/O EtherNet/IP Safety Modules
Installation Instructions CompactBlock Guard I/O EtherNet/IP Safety Modules Catalog Numbers 1791ES-IB8XOBV4, 1791ES-IB16 Topic Page Important User Information 2 North American Hazardous Location Approval
OC IEEE IAS/PES Meeting February 21, 2013
San Diego International Airport: Building For The Future, Through Underground Distribution Automation and SCADA OC IEEE IAS/PES Meeting February 21, 2013 1 Presenter: Randy Denton, PE Under Ground Utility
MARKET PROCEDURE: METER DATA SUBMISSIONS
MARKET PROCEDURE: METER DATA SUBMISSIONS PREPARED BY: Market Operations (WA) DOCUMENT REF: VERSION: 3.0 EFFECTIVE DATE: 30 November 2015 STATUS: FINAL Approved for distribution and use by: APPROVED BY:
QUALITY CONTROL Prepared: TenneT team Reviewed: M. Müller Approved: F. Wester BACKGROUND MATERIAL... 2
POSITION PAPER STAKE HOLDER CONSULTATION PROCESS OFFSHORE GRID NL Type: Position paper Work stream Technical Topic: T.8 SCADA, communication interface and data links Filename ONL 15-185-T8_SCADA, communication
Application Note on Modifying Disconnect Settings for Xantrex GT Series Single Phase Inverters and Conext TX Series Inverters
Application Note on Modifying Disconnect Settings for Xantrex GT Series Single Phase Inverters and Conext TX Series Inverters 976-0312-01-01 Revision A DANGER RISK OF FIRE, ELECTRIC SHOCK, EXPLOSION, AND
DRAFT. Application Note: Modbus/RS485 Wiring for Conext Core XC Series Inverters. 1.0 Introduction DANGER. 1.1 Related Documents
Application Note: Modbus/RS485 Wiring for Conext Core XC Series Inverters AP-XC-025 Revision B 1.0 Introduction DANGER RISK OF ELECTRIC SHOCK, EXPLOSION, ARC FLASH, AND FIRE This Application Note is in
ABB Digital medium-voltage switchgear
NAMIBIA AMEU/AEDU MARCH 2018 ABB Digital medium-voltage switchgear Barry Addinall UniGear Digital Contents 1. Digital switchgear 2. Complexity of Distribution networks 3. New technologies using digital
QUALITY CONTROL Prepared: TenneT team Reviewed: M. Müller Approved: F. Wester
POSITION PAPER STAKE HOLDER CONSULTATION PROCESS OFFSHORE GRID NL Type: Position paper Work stream Technical Topic: T.18 Data acquisition systems on offshore platform Filename ONL-TTB-03103 T18_Data acquisition
C-Bus Network Bridge 5500NB. Series. Installation Instructions REGISTERED DESIGN REGISTERED PATENT
C-Bus Network Bridge 5500NB Series Installation Instructions REGISTERED DESIGN REGISTERED PATENT Contents 1.0 Description...3 1.1 Capabilities...3 1.2 Status Indicators...4 2.0 C-Bus Network Connections...5
Sector Case Study Integration of MVDC Technology. Jonathan Berry Innovation Engineer
Sector Case Study Integration of MVDC Technology Jonathan Berry Innovation Engineer Agenda Innovation Programme Overview Case Study Flexible Power Link Key Learnings and Outcomes Western Power Distribution
GUIDELINES FOR SHARED TRANSMISSION CONNECTIONS IN VICTORIA
GUIDELINES FOR SHARED TRANSMISSION CONNECTIONS IN VICTORIA PREPARED BY: Transmission Services VERSION: 2.0 RELEASE DATE: 14 December 2011 FINAL Version Release History Version Date Approved 1.0 3 Jun 11
Ongoing conformance of the product with the standard is the responsibility of the certificate holder and the Australian manufacturer or importer.
1. Preface The (TECS) offered by Comtest Certification Body is based on a type test scheme, which is one where a representative sample is provided for testing and certification, and does not include any
An Urgent Bulletin from CSA Group
An Urgent Bulletin from CSA Group Photovoltaic Equipment No. 5 Date: September 21, 2015 See Attachment 1 for Effective Dates. See Attachment 1 for Application Due Dates Announcing: Publication of List
IMS INTERFACE MARKET PROCEDURE NETWORK OPERATORS AND AEMO
IMS INTERFACE MARKET PROCEDURE NETWORK OPERATORS AND AEMO PREPARED BY: System Management (WA) DOCUMENT REF: SO_OP_WA_3805 VERSION: 1.0 EFFECTIVE DATE: 13/10/2017 STATUS: FINAL Approved for distribution
National Grid UK Electricity Transmission plc NATIONAL SAFETY INSTRUCTION
National Grid UK Electricity Transmission plc NATIONAL SAFETY INSTRUCTION NSI 0 NATIONAL SAFETY INSTRUCTION INDEX Copyright National Grid plc 2016, all rights reserved. No part of this publication may
IMS INTERFACE MARKET PROCEDURE NETWORK OPERATORS AND AEMO
IMS INTERFACE MARKET PROCEDURE NETWORK OPERATORS AND AEMO PREPARED BY: System Management (WA) DOCUMENT REF: SO_OP_WA_3805 VERSION: 1.0 EFFECTIVE DATE: 13/10/2017 STATUS: DRAFT FOR CONSULTATION Approved
SAMPLE REPORT. Business Continuity Gap Analysis Report. Prepared for XYZ Business by CSC Business Continuity Services Date: xx/xx/xxxx
SAMPLE REPORT Business Continuity Gap Analysis Report Prepared for XYZ Business by CSC Business Continuity Services Date: xx/xx/xxxx COMMERCIAL-IN-CONFIDENCE PAGE 1 OF 11 Contact Details CSC Contacts CSC
National Certificate in Infrastructure Works (Infrastructure Pipelaying Technician) (Level 3) Level 3
NZQF NQ Ref 1282 Version 5 Page 1 of 9 National Certificate in Infrastructure Works (Infrastructure Pipelaying Technician) (Level 3) Level 3 Credits 114 This qualification has been reviewed. The last date
CAUTION This device is sensitive to ElectroStatic Discharge (ESD). Therefore care should be taken during transport and handling.
Rev. 2 28 September 2010 Product data sheet 1. Product profile 1.1 General description Hybrid high dynamic range amplifier module operating at a supply voltage of 24 V (DC) in an SOT115J package. The module
AS/NZS ISO/IEC/IEEE 42010:2013
ISO/IEC/IEEE 42010:2011, IDT Australian/New Zealand Standard Systems and software engineering Architecture description AS/NZS ISO/IEC/IEEE 42010:2013 This Joint Australian/New Zealand Standard was prepared
QUALITY CONTROL Prepared: TenneT team Reviewed: M. Müller Approved: F. Wester BACKGROUND MATERIAL... 2
POSITION PAPER STAKE HOLDER CONSULTATION PROCESS OFFSHORE GRID NL Type: Position paper Work stream Technical Topic: T.8 SCADA, communication interface and data links Filename ONL 15-185-T8_SCADA, communication
TECHNICAL SPECIFICATION FOR MEDIUM VOLTAGE METAL-CLAD SWITCHGEAR (15 KV)
1.1 DESCRIPTIONS OF WORK A. The Bidder shall furnish and install the equipment as specified herein and as shown on the contract drawings. B. The switchgear and circuit breakers shall be manufactured by
Solar Combiner Enclosure
Installation Instructions Solar Combiner Enclosure Catalog Numbers 1000-SB006, 1000-SB012 Topic Page Description 1 Important Safety Instructions 3 Nameplate Data 4 Planning for Installation 4 Install the
Series 8000 RF Signal Switch Solution
RF Signal Switch Solution Operation Manual Operation Manual, Part Number 07508000 006, Rev. B, Oct 7, 2014 All technical data and specifications in this publication are subject to change without prior
From: Dan Toon, EXECUTIVE MANAGER COMMERCIAL SERVICES. Date: 15 August 2007 (Supersedes the 06 March 2007 issue)
Memorandum To: Donna Ward, DEPOT FINANCIAL SERVICES SUPERVISOR From: Dan Toon, EXECUTIVE MANAGER COMMERCIAL SERVICES cc: Date: 15 August 2007 (Supersedes the 06 March 2007 issue) Re: Purchase Specification
Relevant Electrical Standards (RES) Grid Code Review Panel January 2014
Relevant Electrical Standards (RES) Grid Code Review Panel January 2014 Place your chosen image here. The four corners must just cover the arrow tips. For covers, the three pictures should be the same
Questions/queries: Feedback and suggestions welcomed: (+61)
RTO Code 41319 Course outline: 443 Telecommunications F102A (Elective option B) UEENEEF102A - Install maintain cabling for multiple access to telecommunication services Qualification: Applicable to: Unit