Distribution Substation Manual (DSM) Section 8 Distribution Automation
|
|
|
- Thomasine Byrd
- 6 years ago
- Views:
Transcription
1 (DSM) Section 8 Distribution Automation July 2010
2 Document release information Client Project name Western Power Distribution Substation Manual Document number 8 Document title Revision status Distribution Automation 6th Edition Document prepared by: Western Power ABN Prinsep Road, Jandakot Edition/Revision Number Revision History Issue Date Description Endorsed By Approved By First Edition June 1997 Distribution Substations Manual (DSM) issued NA NA Second Edition February 2002 Revised from First Edition Ed Wilcox Robert Rogerson Third Edition March 2007 DSM split into 10 Sections Introduction and Sections 1 to 9 Sandeep Magan Robert Rogerson Fourth Edition June 2009 Added DSM8-07 series Sandeep Magan Fifth Edition November 2009 Updated DSM8-07 series - rev A Sandeep Magan Robert Rogerson Robert Rogerson Sixth Edition July 2010 Updated DSM8-07 series and added DSM8-08 (UGFI) series Sandeep Magan Robert Rogerson Copyright of Western Power Any use of this material except in accordance with a written agreement with Western Power is prohibited. Sixth edition July 2010 Apart from any fair dealing for the purposes of study, research, criticism or review, as permitted under the Copyright Act, no part may be reproduced by any process without written permission. Inquiries should be made to Distribution Standards and Policy Manager, Asset Management Division, Western Power, 85 Prinsep Road, Jandakot 6164
3 8 Distribution Automation Index Of Drawings DRAWING NUMBER DSM-8-01 Sheet 1 of 16 Sheet 2 of 16 Sheet 3 of 16 Sheet 4 of 16 Sheet 5 of 16 Sheet 6 of 16 Sheet 7 of 16 Sheet 8 of 16 Sheet 9 of 16 Sheet 10 of 16 Sheet 11 of 16 Sheet 12 of 16 Sheet 13 of 16 Sheet 14 of 16 Sheet 15 of 16 Sheet 16 of 16 Common Drawings DRAWING TITLE Common drawings that are associated with the Automation of all Switchgear types. General Arrangement of SCADA Equipment Typical Block Arrangement Line Isolation Enclosure Arrangement and Termination Diagram Control Box General Arrangement Control Box Termination & Wiring Diagram Krone Termination Details Krone Termination Rack Notes Krone Label Details Almos Remote Terminal Unit (RTU) Termination Diagram Battery Charger Termination Diagram Magellan (Type) Battery Charger Termination Diagram Saft Nife (Type) Cannon Type Plug in Operating Station for Distant Operation Legend & Notes for Distribution Automation Labels for Distribution Automation Switchgear Position Identification Substation Distribution Board for Sole Use and Customer Owned Substations DSM-8-02 Alstom/Areva Drawings Drawings associated specifically to Alstom/Areva Ring Main Switchgear Sheet 1 of 10 Sheet 2 of 10 Sheet 3 of 10 Control Box Mounting Position of Alstom RMU Isolators Alstom RMU Isolators (2+1, 2+2) Control Box mounting bracket Cutout and Drilling Detail Schematic for Alstom RMU Isolators
4 DRAWING NUMBER Sheet 4 of 10 Sheet 5 of 10 Sheet 6 of 10 Sheet 7 of 10 Sheet 8 of 10 Sheet 9 of 10 Sheet 10 of 10 DRAWING TITLE X1 Control Box Termination & Wiring Diagram for Alstom RMU Isolators X2 Switchgear Termination & Wiring Diagram for Alstom RMU Isolators General Arrangement for Alstom Extensible Isolators Schematic Diagram for Alstom M24 Fluokit Extensible Isolators X2 S/g Termination & Wiring Diagram-Alstom M24 Fluokit Extensible Isolators S.Line, Control and Spare Contact Diagrams - Areva M24+ Fluokit Ext Isolators Termination & Wiring Diagram for Areva M24+ Fluokit Extensible Isolators DSM-8-03 F & G Drawings Drawings associated specifically to F&G Switchgear Sheet 1 of 4 Sheet 2 of 4 Sheet 3 of 4 Sheet 4 of 4 Control Box Mounting Position for F&G GE/GA Isolators Schematic of F&G GE/GA Isolators X1 Control Box Termination & Wiring Diagram for F&G GE/GA Isolators X2 Switchgear Termination & Wiring Diagram for F&G GE/GA Isolators DSM-8-04 Merlin Gerin Drawings Drawing associated specifically to Merlin Gerin Switchgear Sheet 1 of 10 Sheet 2 of 10 Sheet 3 of 10 Sheet 4 of 10 Sheet 5 of 10 Sheet 6 of 10 Sheet 7 of 10 Sheet 8 of 10 Sheet 9 of 10 Sheet 10 of 10 Isolation Switch Mounting Position of Merlin Gerin RM6 Isolators Schematic for Merlin Gerin RM6 Isolators X2 Control Box Termination & Wiring Diagram for Merlin Gerin RM6 Isolators X2 Switchgear Modification to Printed Circuit Board for Merlin Gerin RM6 Isolators Isolation Switch Mounting Position for Merlin Gerin IM6/VM6 Isolators Schematic for Merlin Gerin IM6/VM6 Isolators X2 Switchgear Termination & Wiring Diagram for Merlin Gerin RM6 Isolators Isolation Switch Mounting Position for Merlin Gerin SM6 Isolators Schematic for Merlin Gerin SM6 Isolators X2 Switchgear Termination & Wiring Diagram for Merlin Gerin SM6 Isolators DSM-8-05 Sheet 1 of 13 Long & Crawford Drawings Long and Crawford Schematic for Double Control Box to suit T4GF3, J4, R4
5 DRAWING NUMBER Sheet 2 of 13 Sheet 3 of 13 Sheet 4 of 13 Sheet 5 of 13 Sheet 6 of 13 Sheet 7 of 13 Sheet 8 of 13 Sheet 9 of 13 Sheet 10 of 13 Sheet 11 of 13 Sheet 12 of 13 Sheet 13 of 13 DRAWING TITLE Long and Crawford Schematic for Single Control Box to suit T4GF3, J4, R4 Long and Crawford Termination for Double Control Box to suit T4GF3, J4, R4 Long and Crawford Termination for Single Control Box to suit T4GF3, J4, R4 Long and Crawford Double Control Box Arrangement Long and Crawford Single Control Box Arrangement Long and Crawford Fabrication of J4 Actuator Mounting Bracket Long and Crawford Fabrication of R4 Actuator Mounting Bracket Long and Crawford Fabrication of T4GF3 Actuator Mounting Bracket Long and Crawford Fabrication of J4 Proximity Switch Mounting Bracket Long and Crawford Fabrication of T4GF3, R4 Proximity Switch Mounting Bracket Long and Crawford Fabrication of J4 Actuator Operating Handle Long and Crawford Fabrication of T4GF3, R4 Actuator Operating Handle DSM-8-06 ABB Drawings Drawings associated specifically to ABB Switchgear Sheet 1 of 1 ABB Schematic for RGB12 Switchgear DSM-8-07 Sheet 1 of 7 Schneider RM6 RMU, RTU, AC power supply, modem, antenna and fibre optic connection diagrams Schneider RM6 RMU - MPS Transformer AC power supply to RTU (located adjacent or closer to RMU) Installation details Sheet 2 of 7 Schneider RM6 RMU - Local Pillar AC power supply to RTU ( 200m) Installation details Sheet 3 of 7 Schneider RM6 RMU - SPUDS transformer AC power supply to RTU (> 200m) Installation details Sheet 4 of 7 Sheet 5 of 7 Sheet 6 of 7 Sheet 7 of 7 Schneider RM6 RMU - RTU, modem and antenna wiring diagram Schneider RM6 RMU - RTU, fibre optic modem & interface general wiring diagram Schneider RM6 RMU - RMU and RTU (T200H) connection drawing Schneider RM6 RMU - CT connection diagram
6 DRAWING NUMBER DSM-8-08 Sheet 1 of 6 DRAWING TITLE Fault Indicator (Horstmann Alpha E) Control Box, RMU, RTU, Fault Indicator and AC power supply connection diagrams Fault indicator control box block diagram (for retrofitting to RMUs) c/w drawing references of control box arrangement, Krone termination block connections, goanna GT-30 RTU, AC & DC distribution and terminations plus settings diagrams for Horstmann Alpha E fault indicator Sheet 2 of 6 Fault indicator RTU box mounted on existing RMU (Areva/Schneider) - Installation on piano lid kiosk Sheet 3 of 6 Sheet 4 of 6 Sheet 5 of 6 Sheet 6 of 6 Fault indicator (Horstmann Alpha E) fitted to existing RMU in kiosk Connection diagram Fault indicator (Horstmann Alpha E) fitted to existing RMU in kiosk (Retrofitted CTs) Connection diagram AC Supply to fault indicator from MPS transformer LV AC pillar located adjacent or close to RMU ( 20m) Installation details AC Supply to fault indicator RTU box from LV AC pillar located up to 200m to RMU ( 200m) Installation details
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
Manual: Distribution Substation Manual (DSM) Section 4: Equipment Installation Guide
Manual: Distribution Substation Manual (DSM) Section 4: Equipment Installation Guide Standard Number: HPC-5DA-07-0004-2012 Document Control Author Name: Viswa Easwaran Position: Standards Engineer Document
Network Asset Design Standard HV SUBSTATION FEEDER EXIT CIRCUITS ISOLATION POLICY
Network Asset Design Standard HV SUBSTATION FEEDER EXIT CIRCUITS ISOLATION POLICY Original Issue: September 2007 Prepared by: Lee Chan & Rob Rogerson This Revision: 0 October 2007 Date For Next Review:
Manual: Distribution Substation Manual (DSM) Section 1: Customer Supply Arrangements
Manual: Distribution Substation Manual (DSM) Section 1: Customer Supply Arrangements Standard Number: HPC-5DA-07-0001-2012 Document Control Author Name: Viswa Easwaran Position: Standards Engineer Document
Distribution Substation Manual (DSM) Section 6: Miscellaneous
Distribution Substation Manual (DSM) Section 6: Miscellaneous Standard Number: HPC-5DA-07-0006-2012 Document Control Author Name: Viswa Easwaran Position: Standards Engineer Document Owner Name: Justin
HPC-9DJ
Guideline General Application of Switching Devices on Distribution Networks Standard Number: HPC-2AA-07-0001-2012 Document Control Author Name: Anthony Seneviratne Position: Senior Standards Engineer Document
iswitch imotor Compact QR
PRODUCT DATA SHEET iswitch imotor Compact QR Features: Compact design Fit for purpose Suitable for 2 feeder switches Quick Release for manual operation High operation torque Operation monitoring (max.
Manual: Distribution Substation Manual (DSM) Section 5: Substation Fire Protection Requirements
Manual: Distribution Substation Manual (DSM) Section 5: Substation Fire Protection Requirements Standard Number: HPC-5DA-07-0005- Document Control Author Name: Viswa Easwaran Position: Standards Engineer
Title System Substation Commissioning Tests. Reference Number PCP 07 - (RIC Standard: EP SP)
Discipline Engineering Standard - NSW Category Electrical Title s Reference Number PCP 07 - (RIC Standard: EP 99 00 00 02 SP) Document Control Status Date Prepared Reviewed Endorsed Approved Mar 05 Standards
MESP TECHNICAL SPECIFICATION FOR A RECTIFIER UNIT CONTROL & PROTECTION SYSTEM FOR USE IN THE 1500V DC TRACTION SYSTEM
Engineering Specification Electrical Networks TECHNICAL SPECIFICATION FOR A RECTIFIER UNIT CONTROL & PROTECTION SYSTEM FOR USE IN THE 1500V Version: 1 Issued: March 2014 Owner: Electrical Networks Asset
Products for increased power system availability
Products for increased power system availability P R O D U C T G U I D E Fault detectors and protective relays Protrol s products are designed for reliable and cost-effective performance monitoring and
How smart can the grid really be?
How smart can the grid really be? by Dale Pudney, HVT Power Systems and Luo Wei, NR Electric With the improvement of electronic communications and computing technology, it becomes possible to integrate
ENGINEERING AND SERVICES FIRM THAT SPECIALIZES IN HYDROELECTRIC POWER AND CONTROL SYSTEM DESIGN, OUR TEAM OF PROFESSIONALS HAVE WORKED TOGETHER
smallhydro PRIME ENGINEERING LIMITED IS AN ELECTRICAL ENGINEERING AND SERVICES FIRM THAT SPECIALIZES IN HYDROELECTRIC POWER AND CONTROL SYSTEM DESIGN, IMPLEMENTATION AND MAINTENANCE. OUR TEAM OF PROFESSIONALS
ECS LUCY GEMINI 3 CONFIGURATION PROCEDURE
Document Number: ECS 05-9541 Network(s): Summary: ENGINEERING CONSTRUCTION STANDARD ECS 05-9541 LUCY GEMINI 3 CONFIGURATION PROCEDURE EPN, LPN, SPN This document details the configuration procedure for
EARTH-FAULT AND SHORT-CIRCUIT INDICATOR TYPE EKL8001 / EKL8002 surface mounted
EARTH-FAULT AND SHORT-CIRCUIT INDICATOR TYPE EKL8001 / EKL8002 surface mounted General description The earth-fault and short-circuit indicators type EKL8001 and type EKL8002 can be used in radial networks
SM100. On-Line Switchgear Condition Monitoring
On-Line Switchgear Condition Monitoring On-Line Switchgear Condition Monitoring Introduction Weis is a specialist company with over 40 years of experience in the commissioning, testing & maintenance of
MMLB 01/MMLB 02 Multi-finger Test Plug/ Single-finger Test Plug Technical Data MMLB_EN_TD_A
AUTOMATION MMLB 01/MMLB 02 Multi-finger Test Plug/ Single-finger Test Plug Technical Data MMLB_EN_TD_A GRID Note: The technical manual for this device gives instructions for its installation, commissioning,
MESP MODULAR SUBSTATION USER REQUIREMENTS
Engineering Specification Electrical Networks MODULAR SUBSTATION USER Version: 2 Issued: November 2015 Owner: Head of Engineering/Electrical Approved By: Head of Engineering/Electrical PRINTOUT MAY NOT
Title Substations - Base Safety & Operating Standards. Reference Number POP 07 - (RIC Standard: EP SP)
Discipline Engineering Standard - NSW Category Electrical Title Reference Number POP 07 - (RIC Standard: EP 99 00 00 04 SP) Document Control Status Date Prepared Reviewed Endorsed Approved Mar 05 Standards
File E Project 98NK15665A. Issued January 26, 1999 Revised December 21, 2016 REPORT
File E193475 Project 98NK15665A Issued January 26, 1999 Revised December 21, 2016 REPORT on TRIP DEVICES FOR USE IN LOW VOLTAGE AC POWER CIRCUIT BREAKERS Under The Classification Program Utility Relay
Small Generator Interconnection Facilities Study Report. Completed for. ( Interconnection Customer ) Proposed Interconnection Pavant substation
Small Generator Interconnection Facilities Study Report Completed for ( Interconnection Customer ) Proposed Interconnection Pavant substation Original report dated February 17, 2016 Revised March 11, 2016
3710 ACM 3750 PDC 3800 RTU. ISOCOM Communications Card Retrofit Instructions
3710 ACM 3750 PDC 3800 RTU ISOCOM Communications Card Retrofit Instructions Danger During normal operation of this device, hazardous voltages are present which can cause severe injury or death. These
AUSTRALIAN RAIL TRACK CORPORATION
AUSTRALIAN RAIL TRACK CORPORATION INFRASTRUCTURE, STRATEGY AND PERFORMANCE Engineering Standards and Documents The following recommendation, together with the attached supporting documentation, has been
Design Guidelines for SCADA & DSA
Design Guidelines for SCADA & 28 th February 2017 28 FEBRUARY 2017 ISSUE 4 PREPARED BY: PRINCIPAL ENGINEER SCADA & MANAGER AUTHORISED BY: MANAGER SECONDARY SYSTEMS DOCUMENT NUMBER: ISSUE 4 This plan is
SIGMA D++ / SIGMA D+ / SIGMA D Directional Fault Indicator
SIGMA D++ / SIGMA D+ / SIGMA D Directional Fault Indicator Product Features CT powered directional short-circuit and directional earth fault indicator for all distribution networks / neutral point treatments
Company Directive STANDARD TECHNIQUE: TP18A/1. Application of Connection Control Panels for Soft Intertrip and/or Voltage Constraint Schemes
Company Directive STANDARD TECHNIQUE: TP18A/1 Application of Connection Control Panels for Soft Intertrip and/or Voltage Constraint Schemes Summary This document provides guidance on the application of
ECP NORTROLL CABLETROLL 2350 FPI INSTALLATION AND COMMISSIONING PROCEDURE
Network(s): Summary: ENGINEERING COMMISSIONING PROCEDURE ECP 11-0521 NORTROLL CABLETROLL 2350 FPI INSTALLATION AND COMMISSIONING PROCEDURE EPN, LPN, SPN This document details the installation, testing
EOS LUCY GEMINI 3 TYPE E RTU
Document Number: EOS 05-9305 Network(s): Summary: ENGINEERING OPERATION STANDARD EPN, LPN, SPN EOS 05-9305 LUCY GEMINI 3 TYPE E RTU This standard details the application, installation and operation of
Presented by: Oscar Araujo Photovoltaic Solutions Manager. 4 th Canadian German Solar PV Conference March 2 nd 2011
Photovoltaic Solutions Make the most of your solar PV project Presented by: Oscar Araujo Photovoltaic Solutions Manager 4 th Canadian German Solar PV Conference March 2 nd 2011 Agenda Solutions for Renewable
Continuous level measurement Ultrasonic controllers
Siemens AG 0 Overview is a complete ultrasonic level controller for monitoring and control of water distribution and wastewater collection systems, with energy-saving algorithms. Benefits Monitoring and
ECP SECONDARY SUBSTATION COMMISSIONING PROCEDURE
Document Number: ECP 11-0501 Network(s): Summary: ENGINEERING COMMISSIONING PROCEDURE ECP 11-0501 SECONDARY SUBSTATION COMMISSIONING PROCEDURE EPN, LPN, SPN This procedure details the end-to-end process
NU-LEC. Loop Automation. Reclosers & Sectionalizers
NU-LEC Loop Automation Reclosers & Sectionalizers 1 NU-LEC LLC NU-LEC LLC is a wholly unit of NU-LEC Industries, Pty, Ltd. Sales and service center for United States, Canada, and the Caribbean. Warehouse
Rapier GX Gas Enclosed Load Break Switch and Sectionaliser up to 38kV with automation or remote control options ENGINEERING BRILLIANT SOLUTIONS
Rapier GX Gas Enclosed Load Break Switch and Sectionaliser up to 38kV with automation or remote control options ENGINEERING BRILLIANT SOLUTIONS RAPIER GX Gas Enclosed Switch Our new RAPIER GX, pole-mounted
Adaptors Busplug Low Voltage Switchboard Equipment
Busplug Adaptors Low Voltage Switchboard Equipment Publication BA 2012 CONTENTS Descriptive Advantages of Busplugs 2 General Description 3 Use of Busplugs Adaptors 3 Construction 4 Technical Standards
PG&E Transmission Interconnection Handbook. Update Section Date Added Figure G5-1 Simplified Flow Chart of Pre- Section G5 Aug.
Update History PG&E Transmission Interconnection Hbook Added Figure G5-1 Simplified Flow Chart of Pre- Section G5 Aug. 11, 2004 Parallel/Parallel Test Procedure. Addition of F-35 GE device to Table G2-4
CONTENTS... 2 COMTROLL SAS. SURVEILLANCE AND AUTOMATION SYSTEM...
GENERAL INFORMATION Contents CONTENTS... 2 COMTROLL SAS. SURVEILLANCE AND AUTOMATION SYSTEM... 3 COMMUNICATION... 4 BUILDING-BLOCKS... 5 NETTROLL AND NETDRAW... 5 NETALERT... 6 NETGRAPH... 7 COMTROLL OUTSTATIONS...
No actual trip output occurs if the upper paddle is removed first.
BE1-27/59 SCOPE This test procedure covers the testing of the Basler BE1-27/59 under/overvoltage relay. Refer to IM 9170600990 Rev. L (12/12) for testing support information and component level identification.
Level instruments. Continuous level measurement - Ultrasonic controllers SITRANS LUC500. 5/146 Siemens FI
SITRANS LUC00 Siemens AG 009 Overview SITRANS LUC00 is a complete ultrasonic level controller for monitoring and control of water distribution and wastewater collection systems, with energy-saving algorithms.
MV Network Managment Fault tracking, monitoring and control. Easergy Range Merlin Gerin
MV Network Managment Fault tracking, monitoring and control Easergy Range Merlin Gerin References Schneider Electric Industries SAS Postal address MV department F-38050 Grenoble Cedex 9 Tél. : +33 (0)4
Mounting and Connections
Receipt of the GPU-2000R When you receive the GPU-2000R, examine it carefully for shipping damage. If any damage or loss is evident, file a claim at once with the shipping agent and promptly notify the
URC Utility Relay Company
communications i-comm modbus / rs-485 AC-PRO Communicating Trip Units instruction manual ZERO-Hertz Communicating Trip Units URC Utility Relay Company Chagrin Falls, OH 44023 Phone: 888.289.2864 www.utilityrelay.com
INTERCONNECTION FACILITIES STUDY REPORT
Interconnection Request No. TI-08-0312 INTERCONNECTION FACILITIES STUDY REPORT Prepared by Tri-State Generation and Transmission Association, Inc. 1 of 7 DISCLAIMER OF WARRANTIES AND LIMITATION OF LIABILITIES
Teknisk specifikation REG-DP
REG-DP Only one code of the same capital letter is possible When the capital letter is followed by number 9, further details are necessary The code can be omitted when the capital letter is followed by
FT & RT Test Switches
GE Grid Solutions FT & RT Test Switches Key Benefits The FT Switches and FT Test Plugs have all the features necessary for applications involving the measurement of individual currents and voltages to
Sensaphone SCADA 3000 APPLICATION SUPPORT BULLETIN Single-Frequency Radio
Sensaphone SCADA 3000 APPLICATION SUPPORT BULLETIN Single-Frequency Equipment requirements for a typical Sensaphone SCADA 3000 application using licensed, single-frequency radio modems. The purpose of
Specification Voltage Limiting Device
Engineering Specification Electrical Networks L1-CHE-SPE-152 Specification Voltage Limiting Device Version: 1 Issued: 20 th April 2018 Owner: Chief Engineer Approved By: Andrew Russack Head of Engineering,
EOS LUCY SABRE 'A' RANGE SWITCHGEAR
Document Number: EOS 03-0027 Network(s): Summary: ENGINEERING OPERATION STANDARD EOS 03-0027 LUCY SABRE 'A' RANGE SWITCHGEAR EPN, LPN, SPN This standard details the installation, commissioning and operation
Session Five: IEC61850 Based Process Bus Protection Solution for Remote Located Power Transformers
Session Five: IEC61850 Based Process Bus Protection Solution for Remote Located Power 1. Abstract Dinesh Mithanthaya Design Manager, Horizon Power Higher capacity substation power transformers ( 5MVA),are
DNP3 Communication User's manual
MV Network Management Fault tracking Monitoring and Control Merlin Gerin Easergy Range T200 P, T200 I DNP3 Communication User's manual Summary General...2 Functionnalities...2 Characteristics...2 Connection
SIEMENS 8DJH 11/22 kv Ring Main Units
POWER AUTOMATION TECHNOLOGIES SIEMENS 8DJH 11/22 kv Ring Main Units Overview of Outdoor and Indoor solutions 01 02 Transformer Kiosk Indoor on Base Absorber Class A 03 07 Outdoor Class A Outdoor Class
QUALITY CONTROL Prepared: TenneT team Reviewed: M. Müller Approved: F. Wester BACKGROUND MATERIAL... 2
POSITION PAPER STAKE HOLDER CONSULTATION PROCESS OFFSHORE GRID NL Type: Position paper Work stream Technical Topic: T.8 SCADA, communication interface and data links Filename ONL 15-185-T8_SCADA, communication
GE Power Conversion T1930EN INSTRUCTION SHEET REV. 09 MV3000E DELTA MAINS VOLTAGE MONITOR UNIT MVC X 1. DESCRIPTION
GE Power Conversion T1930EN INSTRUCTION SHEET REV. 09 MV3000E DELTA MAINS VOLTAGE MONITOR UNIT 1. DESCRIPTION The Mains Voltage Monitor Unit (MVM Unit) is used to precisely monitor the mains voltage and
MNS Platform, low voltage systems Rear Access Power Motor Control Center. Alberto Carini, Global Product Manager
MNS Platform, low voltage systems Rear Access Power Motor Control Center Alberto Carini, Global Product Manager MNS Platform, low voltage systems Add Value to our customers Sales After sales Maximum safety;
B. System Design and Performance Requirements
Change History Date Description of Change Pages / Sections Modified Change Approver Initials 6/15/16 Updated division section from 16950 to 26 27 13, removed references to other section numbers 11/21/14
Safety Test Switch. Reference Handbook. STS-reference-en v
Safety Test Switch Reference Handbook STS-reference-en v.12 12 12 12 Copyright Notice All information provided in this document is the property of SECUCONTROL. SECUCONTROL grants its customers or potential
GRID/PRSHT/MU320/EN/1.2014/GBR/1894 ALSTOM All rights reserved.
GRID/PRSHT/MU320/EN/1.2014/GBR/1894 ALSTOM 2014. All rights reserved. GRID/PRSHT/MU320/EN/1.2014/GBR/1894 ALSTOM 2014. All rights reserved. MEASUREMENT PRODUCT SOLUTIONS Reason RPV311 Digital fault recorder
EOS REMSDAQ CALLISTO NX TYPE E RTU
Document Number: EOS 05-9306 Network(s): Summary: ENGINEERING OPERATING STANDARD EOS 05-9306 REMSDAQ CALLISTO NX TYPE E RTU EPN, LPN, SPN This standard details the application, installation and operation
POWER GRID AUTOMATION. Pág.. n. RMU Automation
POWER GRID AUTOMATION RMU Automation Distribution Network Non-Controlled Secondary Distribution Systems Distribution Network RMU Automation - Levels RMU Automation - RTU / FRTU SMART CONTROLLER Monitoring
SECTION ELECTRIC METERING
SECTION 26 27 13 ELECTRIC METERING SPEC WRITER NOTES: Use this section only for NCA projects Delete between //----// if not applicable to project. Also delete any other item or paragraph not applicable
Product Data Sheet. Hochiki 8 Way I/O Card. Features
Hochiki 8 Way I/O Card Product Data Sheet Features The Mxp-019 is a stand-alone fire system peripheral based on the Hochiki ESP protocol for use with the Mx-4000 range of panels. The unit connects to the
C-Bus Network Bridge 5500NB. Series. Installation Instructions REGISTERED DESIGN REGISTERED PATENT
C-Bus Network Bridge 5500NB Series Installation Instructions REGISTERED DESIGN REGISTERED PATENT Contents 1.0 Description...3 1.1 Capabilities...3 1.2 Status Indicators...4 2.0 C-Bus Network Connections...5
The right solution for every home
Domae Household switchboards The right solution for every home Household guide 2002 Building a New Electric World. Household switchboards Domae The right solution for every home Household guide 2002 Building
4. CIRCUIT BREAKERS. Functional Emergency Switching
4. CIRCUIT BREAKERS The circuit breaker/disconnector fulfils all of the basic switchgear functions, while, by means of accessories, numerous other possibilities exist. As shown in table H2-19 the circuit
Electrical Demand Specification (Reference SOP: )
Project: Equipment Description: Location: Equipment No.: Project No: Protocol No.: Content Index 1. GENERAL...3 Design Standards...3 1.1. Standards...3 2. DESIGN...3 2.1. Safety...3 2.2. Circuit protection...3
SPI PowerNet requirements for the non-contestable Interface Works at Deer Park Terminal Station
SPI PowerNet requirements for the non-contestable Interface Works at Deer Park Terminal Station SPI PowerNet Reference: ZD23 Version: 1.1 Issue date: 15 May 2014 Contents 1 Scope... 3 2 Deer Park Terminal
Model 2657A-LIM-3 LO Interconnect Module
Keithley Instruments, Inc. 28775 Aurora Road Cleveland, Ohio 44139 1-888-KEITHLEY http://www.keithley.com Model 2657A-LIM-3 LO Interconnect Module User's Guide Description The Model 2657A-LIM-3 LO Interconnect
EOS SCHNEIDER RINGMASTER 'C' RANGE SWITCHGEAR
Document Number: EOS 03-0018 Network(s): Summary: ENGINEERING OPERATION STANDARD EOS 03-0018 SCHNEIDER RINGMASTER 'C' RANGE SWITCHGEAR EPN, LPN, SPN This standard details the installation, commissioning
April 2010 Power Systems division A brief introduction. ABB Group August 25, 2011 Slide 1
April 2010 Power Systems division A brief introduction August 25, 2011 Slide 1 Facts about ABB 117,000 employees in about 100 countries $32 billion in revenue (2009) Formed in 1988 merger of Swiss and
Digital substations. Introduction, benefits, offerings
Digital substations Introduction, benefits, offerings Outline What is a digital substation? Benefits of digital substations ABB offering for digital substations Substation evolution June 26, 2017 Slide
Remote Real-Time Measurements of Voltage, Current and Energy
Remote Real-Time Measurements of Voltage, Current and Energy Chris Yakymyshyn Pam Hamilton Michael Brubaker yakymyshyn@fieldmetricsinc.com 727-319-0299 Slide 1 Outline Introduction FieldMetrics (FMI) Products
Protective Relay Application Guide Alstom
PROTECTIVE RELAY APPLICATION GUIDE ALSTOM PDF - Are you looking for protective relay application guide alstom Books? Now, you will be happy that at this time protective relay application guide alstom PDF
Enhancing Reliability of Legacy Systems with New Generation Low-Voltage Circuit Breaker Upgrades
Enhancing Reliability of Legacy Systems with New Generation Low-Voltage Circuit Breaker Upgrades May 2012 / 1910DB1202 by Hal Theobald, Product Manager, Schneider Electric Services and Reza Tajali, P.E.,
EDS MW AND MVAR TRANSDUCER CONNECTION
Document Number: EDS 05-5001 Network(s): Summary: ENINEERIN DESIN STANDARD EDS 05-5001 MW AND MVAR TRANSDUCER CONNECTION EPN, LPN, SPN This standard details the convention to be used when wiring MW and
Our Power & Control line of Business offers solutions that safely distribute power to your home or business. Our product range includes Low/Medium
Our Power & Control line of Business offers solutions that safely distribute power to your home or business. Our product range includes Low/Medium Voltage Panels and Enclosures designed and built with
Product Description. S&C IntelliNode Interface Module. Table of Contents. Instruction Sheet
S&C IntelliNode Interface Module Product Description Table of Contents Section Page Section Page Introduction Qualified Persons.......................... 2 Read this Instruction Sheet..................
CPU module for zone 2 Series 9442/35
> Supports PROFIBUS DP, PROFINET, Modbus TCP and Ethernet/IP; incl. HART transmission > RS-485 (max. 12 Mbps) and Ethernet (max. 100 Mbps) interfaces > Extensive diagnostics based on NE 107 > Support of
Power Quality and Recording Field Upgrade Available SEL-734, Standard Power Quality, 32 MB Memory SEL-734P, Advanced Power Quality, 128 MB Memory*
SEL-734 Advanced Metering System with ANSI and IEC Class 0.2 Accuracy Standard with: ANSI Type 2 Optical Port, 2 Rear EIA-232 Ports, ACSELERATOR QuickSet SEL-5030 Software, Modbus RTU Communications Protocol,
FTS / FTP Test Blocks & Plugs
FTS / FTP Test Blocks & Plugs Reference Handbook fts-reference-en v.154 Copyright Notice All information provided in this document is the property of SECUCONTROL. SECUCONTROL grants its customers or potential
Relion 615 series Line Differential Protection and Control RED615 Ver. 2.0 Technical Presentation
Relion 615 series Line Differential Protection and Control RED615 Ver. 2.0 Technical Presentation ABB Oy Distribution Automation July 1, 2009 1MRS756504 B Slide 1 Contents RED615 Technical Presentation
Zener Barriers Bulletin 937Z
Technical Data Zener Barriers Bulletin 937Z Topic Page Introduction 2 Mounting 2 Housing 3 Operating Principle 3 Specifications 6 Introduction Allen-Bradley Zener barriers are a cost-effective solution
Mehta Tech, Inc. TRANSCAN IED For Multi-Function, Multi-Speed Recording
Mehta Tech, Inc. TRANSCAN IED For Multi-Function, Multi-Speed Recording Two independent, simultaneously operating recorders in one package Triggering on input quantities and calculated values, such as
Sensus T866 MicroRTU. Remote Input/Output Control. Applications. Reporting Methods DATA SHEET
Sensus T866 MicroRTU Remote Input/Output Control The Sensus Distribution Automation (DA) T866 MicroRTU is a cost effective solution for monitoring, controlling, and operating remote equipment such as switches,
Document C0. Use for:
Date: July 27, 2015 Document C0 Use for: Connection of Electric Generation that will operate with an Open Transition (Category 1) between the Ameren System and the Generator or operate with a Synchronized
/ Charlie Hsu, Sales, PSAC, Power System Division, TWABB, June.2013 IEC The Approach and the Standard. ABB Group July 1, 2013 Slide 1
/ Charlie Hsu, Sales, PSAC, Power System Division, TWABB, June.2013 IEC 61850 The Approach and the Standard July 1, 2013 Slide 1 Agenda Introduction & revolution The key issues for IEC 61850 Logical Nodes
CABLETROLL 3 CABLETROLL CABLETROLL CABLETROLL CABLETROLL LED-2 5 CABLETROLL CABLETROLL REMOTE INDICATION 7
CABLETROLL 3 CABLETROLL 2310 4 CABLETROLL 2320 4 CABLETROLL 2330 5 CABLETROLL 2350 5 LED-2 5 CABLETROLL 2410 6 CABLETROLL 2440 6 REMOTE INDICATION 7 The CableTroll indicators are fault current detectors
satech TSB-14 MAIN FEATURES
satech TSB-14 ARTECHE satech TSB test block allows the testing of the protection relay, in a safe and easy way, ensuring isolation between the relay and field elements and eliminating any risk for the
DC Outdoor Power Supply/Chargers
DC Outdoor Power Supply/Chargers Installation Guide Models Include: WayPoint3 WayPoint7-2.5A @ 12VDC or 24VDC. - 6A @ 12VDC or 24VDC. - 115/230VAC input. - 115VAC input. WayPoint5 WayPoint7V - 4A @ 12VDC
Switch Disconnectors, Main and EMERGENCY-STOP Switches
General data Overview Siemens G 2010 1 2 3 NSE0_01931b 4 5 6 7 1 uxiliary switch (3SB for 3K; 3KX for 3KE) 2 IP20 terminal cover (Operator side) 3 3K switch disconnector 4 rcing contacts (only for 3KE)
Substation monitoring and control
Substation monitoring and control Part 3. Substation Automation Author Peter Johansen, www.jomitek.dk In the preceding 2 articles the topics of measurement techniques for voltage and current has been covered.
Fibre Modem - Single-mode
Revision 1.0 November. 2006 1 - Single-mode P/N: : 995087 Model 3000 / Access 4000 Optically Isolated Interface INSTALLATION GUIDE OVERVIEW: The Inner Range Single-mode provides 2 separate, optically isolated
MMLG 01, 02, 03, 04 MMLB01
MMLG 01, 02, 03, 04 MMLB01 Technical Data Test Blocks and Test Plugs Publication Reference: MMLG_MMLB/EN/TD/B - ALSTOM 2015. All rights reserved. Information contained in this document is indicative only.
New 30AA and 31AA Electronic Motor Protection Modules. Application Bulletin 128
New 30AA and 31AA Electronic Motor Protection Modules Application Bulletin 128 Application Bulletin Number: 128 Release EN: D09910 Date: 4/19/96 Revision EN: Z27301 Date: 10/2/15 Subject: New 30AA and
MESP TECHNICAL SPECIFICATION FOR 22 kv METAL ENCLOSED SWITCHGEAR
Engineering Specification Electrical Networks TECHNICAL SPECIFICATION FOR 22 kv Version: 2 Issued: 19 th December 2016 Owner: Chief Engineer Approved By: Andrew Russack Head of Engineering - Electrical
Arc protection relay. Features Three-phase overcurrent function. Application
Arc protection relay REA 10_ Page 1 Issued: May 1999 Status: New Data subject to change without notice Features Three-phase overcurrent function Loop-type or radial sensor fibre for arc detection Two high-speed
ITS / STP Test Blocks & Plugs
ITS / STP Test Blocks & Plugs Reference Handbook its-reference-en v.50 Copyright Notice All information provided in this document is the property of SECUCONTROL. SECUCONTROL grants its customers or potential
7415 x. Made in Germany. fluid sensors and diagnostic systems. position sensors and object recognition bus, identification and control systems
7 x Made in Germany 00 fluid sensors and diagnostic systems position sensors and object recognition bus, identification and control systems Easy adjustment and parameter setting. Clear CD display with
Solving your relay requirements since 1922
Expected Life @ 25 C: 100,000 operations minimum at rated loads Solving your relay requirements since 1922 C Series TDR Solid state analog circuitry Delay on operate timing mode Compact size Relay output
Lucy Switchgear. SKELEC Automation Project. John Barker Tim Spearing
Lucy Switchgear SKELEC Automation Project John Barker Tim Spearing Contents Lucy Switchgear Automation SKELEC Automation Project Why ABB MicroSCADA / DMS 600 Key facts Group Europe 16% 150m Turnover Americas
Agilent N2739A 1000 Series Oscilloscope Rack Mount Kit
Agilent N2739A 1000 Series Oscilloscope Rack Mount Kit Installation Guide Agilent Technologies Notices Agilent Technologies, Inc. 2008 No part of this manual may be reproduced in any form or by any means
Manual# Installation Manual. 200E Series. DCU 210E/208E Engine Panel RP 210E/220E Remote Panel
Manual# 1006495 Installation Manual 200E Series DCU 210E/208E Engine Panel RP 210E/220E Remote Panel Installation Manual for the Marine Pro 200E Series ~~~ DCU 210E/208E Diesel Engine Control Unit RP 210E/220E
Sicat CMS. siemens.com/mobility. Catenary monitoring system for overhead contact line systems
The contactless catenary monitoring system Sicat CMS continuously monitors the tensile forces in the contact wire and catenary wire and also acquires and evaluates the information. The filtered information