Step 1 Click the Get Started bu(on under Tester Registraon. Step 2 Enter Company informaon and Company Administrator Account informaon

Transcription

1 Due to feedback from Tesng Companies, each company will also have a Company Administrator Account that can Manage Company Informaon, add Testers and run reports on work performed. The Administrator does not need to be a tester, but if they are, they can always register as a tester by adding their Tester specific info to their User Account. Step 1 Click the Get Started bu(on under Tester Registraon Step 2 Enter Company informaon and Company Administrator Account informaon Step 3 Receive Administrator Approved from do-not-reply@gethydroso1.com with Login and Password. Step 4 Log in to view Company Dashboard. Tester accounts can be created from your Dashboard.

2 Open an Internet Browser and navigate to Click the Get Started button under Tester Registration Enter your Testing Company Information and create the login for the Tester Company Administrator Account. Administrator does not have to be a tester, but after the Admin Account is created and approved, it can be turned into a Tester Account too. Note: Fields Highlighted Orange are Required: Company Name, Contact Name, Primary Company , Address, City, State, ZIP, and Phone Number. (Continued on page 3) 2

3 (Continued from page 2) Your login name must be unique, and you can use your own address or the main address for your company. Accept the Terms and Conditions and click Register. We will review your account and approve it. Once Approved, you will receive an with your temporary password. You can login to update your Password, or company information. If the administrator is also a tester, you can update the Tester specific information under the administrator s User Account. Once images have been uploaded, we will be able to approve the tester side of the Admin account and you ll be able to input test forms. See the next page for how to add a tester record. 3

4 How to Add a Tester to your Testing Company 1. Click the Add Tester Button on your Dashboard 2. Enter the required information 3. HydroSoft will send an to the tester the Login Name you created for them and a temporary Password. You as the Administrator can access the same page simply by clicking the Select button next to the tester record. (Continued on page 5) 4

5 (Continued from page 4) 4. You can Change the temporary password, edit any of the tester information previously entered and upload the Certification Documents for your tester. Or the tester can log in with the credentials in the and update that information. 5. Click Choose Files to upload images of the Tester s Certification Card and Calibration for their test gauge. Uploaded images can be viewed and removed. (Continued on page 6) 5

6 (Continued from page 5) 6. When all of the information has been submitted, the Tester account can be approved. An will be sent to the tester when the account is approved. You as the Company Administrator can see that their account has been approved by checking their record on your dashboard. 6

7 The Dashboard consists of 3 Areas. 1. The Top section is your Company Information. 2. The 2nd Section is your list of Administrators and Testers already registered with HydroSoft. 3. The final section is a display of all of the test forms your company has entered this year. 7

8 There are 5 dynamic reports on the left and two tables on the right. The top table is an overall count of all backflow preventers all testers in your company have entered into the system. The table below that will show how many of each type of backflow preventer have been tested by each tester in your company. Use the drop down box to select a different tester. The Dynamic Reports on the left can be filtered by Start and End Date, of by selecting the City from the drop down. Facilities where testing is Complete is a listing of every facility where all testable assemblies have been tested for this year. Assemblies Failed is a listing of all Facilities where a Backflow Preventer has a failed test. Facilities will be removed from this report when all Backflow Preventers at that facility have passed. Facilities where Testing is not Complete is a listing of every facility where at least one Backflow Preventer has been tested, but there are others that have not be tested or have not been removed. These Facilities are going to receive additional testing notifications. Non-Compliant Facilities is a listing of Facilities your Company has tested, but that facility has outstanding Cross Connection Control Violations. Pending Test Forms is listing of test forms your Company have submitted but have not yet been approved. If we have questions regarding a test form and reach out to you for clarification, the record is very likely in that report. If you still require assistance, please contact: Ryan Hensley Backflow Prevention Assembly Tester Support, HydroCorp ASSE Certification #18184 # Surveyor # Program Administrator 8