Chapter 3 Device Monitoring Screen
|
|
|
- Mark Watkins
- 6 years ago
- Views:
Transcription
1 Chapter 3 Device Monitoring Screen
2 Chapter 3 Device) Device Monitoring Screen (Screen for checking the status of each Table of contents 3.1Device Monitoring Screen What is Device Monitoring Screen? Lamp Display Methods for Lamp Display3-5 How to Display Lamp (Settings of lamp)3-6 How to Place the Lamp3-8 How to Display Lamp (Settings of 4 State Lamp)3-10 How to Place the 4 State Lamp Message Display Methods to Display Messages3-15 How to Display Messages (Settings of Message Display)3-16 How to Place the Message Display3-18
3 Device Monitoring Screen The Lamp Display and Message Display indicating the status of the device is explained in this chapter.
4 3.1 Device Monitoring Screen What is Device Monitoring Screen? Why is it used? In the Device Screen, the screen where the ON/OFF status for each device or the I/O status for temperature/ pressure can be displayed using the lamp or message is created. Device Screen The Operation Status of each lamp is set in the lamp label. The operation status of Line D is set in the label of the 4 State lamp and displayed. The conditions of Line are displayed using the message display The power and speed data for each line is displayed using the meter or bar graph.
5 Lamp Display The lamp for displaying the status of the device will be explained in this chapter.
6 3.2 Lamp Display Methods for Lamp Display The lamp monitors the ON/OFF status of the bit address of PLC and switches the display. (1)Lamp Display Bit address is monitored and the display of the respective pictures (Labels) at the time of ON/OFF is switched. Examples of Lamp Display The labels of ON/OFF can be in different characters. Example)Normal / Abnormal Stopping /Running Etc. (2) 4 State Lamp Display Two Bit addresses are monitored and with the combinations of ON/OFF of respective Bits, the display of pictures(labels) of 4 status is switched State lamps display example The labels of ON/OFF can be in different characters. Example)Stop /Low speed / Medium speed / High speed Level 1/Level 2/Level 3/Level 4,etc. Hint! Even more displays can be switched by using message display (P3-16) and L tag (P8-16).
7 3.2 Lamp Display How to Display Lamp?(Lamp Settings) Depending on the PLC Bit Address status, lamp displays ON/OFF. (1) Selection method of Lamp Select Lamp from Parts in the Menu bar. Menu bar Or, Click the icon of Lamp Parts tool bar (2) General settings State: If ON/OFF is clicked, the picture of lamp is changed to ON/OFF status. Browser: The lamp picture can be selected if clicked. Set the Bit Address to be monitored.
8 3.2 Lamp Display (3) Shape/ Color Settings For the settings of color, depending on the picture selected in the browser there are pictures that can. Can not be changed. The first screen shot shows the dialog box where the color can not be changed and the screen shot below shows the dialog box where the color can be changed. State: If ON/OFF is clicked the picture of the lamp is changed to ON/OFF status. Browser: The lamp picture can be selected if clicked. When colors can be changed The color for the picture of the lamp is set. When colors can not be changed (4) Label Settings The characters displayed on lamp are set. ON/OFF for State is selected and the characters to be displayed are set for ON/OFF each For details refer P1-9
9 3.2 Lamp Display How to Place the Lamp The method of creating the lamp displaying the operation status of each line is explained in this section. Setup Flow 1. Open the base screen B Set/ Place Lamp. (1)How to select the Lamp Click the Lamp icon from the Parts tool bar. (2) Information settings Select the picture of the lamp to be placed Click Browser. Select Image_Orange_256 from Parts Palette. Select LM_img011o and click OK. Set M115 in Bit Address.
10 3.2 Lamp Display (3) Label Settings 1. Set State to Off 2. Select Direct and check Image Font. 3. Click Select Font and perform the following settings. Font Name: MS Gothic StyleRegular Size: 9 4. Click OK. 5. Enter Auto Running in Label (OFF) 6. Set Alignment to. 7. Click Copy to ON state. Click Copy to ON state and if the State is switched to On the label of State : Off are copied to State: On. (4) How to Place the Lamp Click Place and the Lamp is placed. On the right side of the lamp placed for Auto Running, Lamp is to be placed. The following settings are to be performed. Bit address: M116 Label: Auto Running Stopping Perform the other settings like the settings of Auto Running Lamp.
11 3.2 Lamp Display How to Display Lamp?(4 State Lamp Settings) Lamp Display of the 4 Bit addresses status is possible by referring to the status of 2 Bit addresses of PLC. (1) How to select 4 State Lamp Select Lamp from Parts of Menu bar. Menu bar Or, click the Lamp icon. Parts Tool bar (2) General Settings Lamp Address 1,Lamp Address 2:If ON/OFF is clicked, lamp picture changes to that status. Browser: The lamp picture can be selected if clicked. The Bit Address to be monitored is set. (3) Shape/ color settings Lamp Address 1, Lamp Address 2If ON/OFF is clicked, lamp picture changes to that status. Browser: The lamp picture can be selected if clicked. Color of the lamp picture is set.
12 3.2 Lamp Display (4) Label Settings The characters displayed on the lamp are set. Select ON/OFF for Lamp Address 1 Lamp Address 2 and set the characters to be displayed. For details refer P1-9
13 3.2 Lamp Display How to place the 4 State Lamp Setup Flow How to display the 4 State Lamp. 1. Open the base screen B Set/ Place the 4 State Lamp. (1) How to select 4 State Lamp Click the icon of 4 State Lamp from the Parts tool bar. (2) General settings Click Browser, and select the desired picture. Set M110 in Lamp address 1 and M111 in Lamp Address 2. (3) Shape/ Color Settings Switch ON/OFF of Lamp Address 1 and Lamp Address 2, And set the desired color for each status of lamp. After finishing the settings, click Place and place it on the screen. Does not function on Sample screen.
14 3.2 Lamp Display Hint! How to check the operation of the 4 state lamp on the screen editor? If the numbers of the Parts State Switch Tool Bar are clicked, it is possible to check the display of the 4 State Lamp.
15 Message Display The method of switching the display of the short messages will be explained here.
16 3.3 Message Display Methods for Message Display The display of the set message is switched by monitoring the status of the specified Bit Address and Word Address Message Display The created message is switched as per the change in data. There are two modes of operation, namely Bit and Word. When Operation mode is Bit, one Bit Address is monitored and like lamp, the two messages of ON/OFF are alternately displayed. When the Operation Mode is Word, 16 messages at maximum can be switched and displayed. When the Operation Mode is Word In 1 Word Address, the ON/OFF status of the lower 4 bits is monitored. Maximum 16 messages The Bit count used in 1 Word Address Hint! Switching up to 2 types and 4 types, is possible even with Lamp or 4 State Lamp. (Refer P3-5) and, in case of more than 17 types status are to be displayed, L tag (Indirect) is used.(p8-18)
17 3.3 Message Display How to Display Message? (Message Display Settings) Maximum 16 types of messages can be displayed alternately by referring to the change in the data of specified Bit/ Word Address. (1) How to Select Display Message? Select Message Display from the Parts on the Menu bar. Menu Bar Or click the icon of Message Display Parts Tool Bar (2) General Settings The picture of the currently message display is displayed If Browser is clicked, the picture of the message display can be selected. The address for changing the message is set.when the Mode is Bit, Bit Address is set and when it is Word, Word Address is set. The color of the border of the Message Display is set. When there are two messages, set as Bit, if 3-16, set as Word Alignment: The alignment of the message can be selected from Left/Center/Right Font Size: Set the font size of the message.
18 3.3 Message Display (3) Message Settings Direct: the characters to be displayed are directly input. Browse Text Table: The character string registered in the Text Table is selected and displayed (It is used when the language of the Display Screen is to be switched between Japanese and English) Displayed Character Count: The character count of the displayed message is set. The maximum count are 40 single byte characters. Message Registration: Message is registered here. Message Settings: The ON/OFF button of the specified Bit is selected and the respective message is registered. Comment Copy: The Text set in the Comment of Information is copied to Selected Message. Copy to all : The text registered in the current Selected Message is all copied to the Selected Message For each message the Text Style, Text Color and Plate Color is set. No. Of Messages: The number of messages to be switched and displayed is set. The message count can be selected from 2, 4, 8, 16. Display Characters: The character count for the displayed text is set. Maximum character count is single byte 40 characters. Message : The button only shows the number set in the message count. The number is selected and the respective messages are registered.
19 3.3 Message Display How to place the Message Display How to display the message display that displays the operation status of line. Setup Flow 1. Open the base screen B Set/ Place the Message Display. (1) How to select the Message Display Click the Message Display icon from Parts Tool Bar. (2) General Settings Click the Browser and select the desired picture. Set the Mode as Word and Address as D68. Set the desired Border Color Alignment and Character Size.
20 3.3 Message Display (3) How to set the message Select Direct and set the No. of Messages as 8 and Display Characters as 14. Select 0 for Message Settings. Enter Normal in Selected Message. And set the desired Character style and color. Change the Message Settings sequentially from 1 to 4 and register the following messages respectively.. Message Settings: 1 is Power Error Message Settings: 2 is Line clogged Message Settings: 3 is Maintenance Message Settings: 4 is Emergency Stop (4) How to place the Message Display Click Place, and place the Message Display on the screen. (5) How to operate the Message Display The actual working is as follows. Save 0 in Word Address Save 1 in Word Address Save 2 in Word Address Save 3 in Word Address Save 4 in Word Address Like 4 State Lamp, the display can be checked by Parts State Switchover Tool Bar. (Refer P3-13)
21 Hint! Modifications in the Label Alignment for Lamp or Message Display- Alignment - For e.g. if the label of the part has shifted, as shown on the right Specify by clicking the entire part. (The handle is displayed in the surrounding area) Then click on the shifted label as shown and select only the label part Right click on the label, go to Alignment option in the items of the Pull down menu and lastly click Center. The label is placed in the center of the frame. Alignments other than Center are also possible. It can also be used in parts like Switch or Numeric Display. If Align Others is used, multiple objects are selected in the specified range and they can be arranged on X and Y axis.( For the range specification refer P1-13) Example)
OtasukeGP! Chapter 10 Recipe Input Screen 10-0
Chapter 0 Index Chapter 0Recipe Input Screen (Write Data Registered in GP to PLC) 0. Recipe Input Screen What is a Recipe Input Screen? 0-3 0.2Recipe Input Settings Operating Filing 0-5 filing setting
Chapter 6. Input Settings Screen
Chapter 6 Input Settings Screen Table of contents Chapter 6 Input Settings Screen (Screen for Setting the Production Quantity and Speed, etc.) 6.1 Input Settings Screen What is an input settings screen?
Chapter 5. Set Value Input Screen. Otasuke GP-EX! Chapter 5 Set Value Input Screen 5-0. Set Value Input Screen 5-1. Let s Enter Target Value 5-2
Chapter 5 Set Value Input Screen Set Value Input Screen 5- Let s Enter Target Value 5- Let s Add/Subtract Speed Data 5-5 Let s Set Multiple Features to Single Switch 5-9 Let s Enter Product Name 5-3 5-0
Learning More About NetObjects Matrix Builder 1
Learning More About NetObjects Matrix Builder 1 NetObjects Matrix Builder is a service that hosts your Web site, makes it easy to update, and helps you interact with visitors. NetObjects Matrix Builder
Pressing the Print Button outputs a screenshot of the current screen to the printer. MICRO/I
4 Print Button HG2G-S HG2G-5S HG2G-5F HG3G HG4G HG1F HG2F HG2S HG3F HG4F 4.1 How the Print Button is Used Outputs a screenshot to a printer or a memory card. Pressing the Print Button outputs a screenshot
To Create Multiple Columns in a Word Document
To Create Multiple Columns in a Word Document To convert your standard single- (or no-) column Word document into one with multiple columns, simply choose the column format you want from the Columns menu.
13-1. This chapter explains how to use different objects.
13-1 13.Objects This chapter explains how to use different objects. 13.1. Bit Lamp... 13-3 13.2. Word Lamp... 13-5 13.3. Set Bit... 13-10 13.4. Set Word... 13-13 13.5. Function Key... 13-21 13.6. Toggle
Excel Select a template category in the Office.com Templates section. 5. Click the Download button.
Microsoft QUICK Excel 2010 Source Getting Started The Excel Window u v w z Creating a New Blank Workbook 2. Select New in the left pane. 3. Select the Blank workbook template in the Available Templates
Week 5 Creating a Calendar. About Tables. Making a Calendar From a Table Template. Week 5 Word 2010
Week 5 Creating a Calendar About Tables Tables are a good way to organize information. They can consist of only a few cells, or many cells that cover several pages. You can arrange boxes or cells vertically
Inspiration 9. Table of Contents
Table of Contents Diagram View 2 Outline View 3 Diagram View 4 Adding Ideas 4 Rapid Fire tool 5 Saving your work 5 Viewing Subtopics and Arranging symbols 5 Changing Symbols 6 Adding Symbols with no links
PowerPoint X. 1. The Project Gallery window with the PowerPoint presentation icon already selected. 2. Click on OK.
PowerPoint X Launching PowerPointX 1. Start PowerPointX by clicking on the PowerPoint icon in the dock or finding it in the hard drive in the Applications folder under Microsoft PowerPoint. PowerPoint
Center for Faculty Development and Support Making Documents Accessible
Center for Faculty Development and Support Making Documents Accessible in Word 2007 Tutorial CONTENTS Create a New Document and Set Up a Document Map... 3 Apply Styles... 4 Modify Styles... 5 Use Table
Recipes4Success. FileMakerPro6
Recipes4Success Compiled by: Florence McGee, Pinellas County 2008. All Rights Reserved. This Material is copyrighted under United States copyright laws. Tech4Learning, Inc. is the exclusive owner of the
Starting Excel application
MICROSOFT EXCEL 1 2 Microsoft Excel: is a special office program used to apply mathematical operations according to reading a cell automatically, just click on it. It is called electronic tables Starting
V-BOX Cloud Configuration
V-BOX Cloud Configuration Website: http://www.we-con.com.cn/en Technical Support: support@we-con.com.cn Skype: fcwkkj Phone: 86-591-87868869 QQ: 1043098682 Technical forum: http://wecon.freeforums.net/
Using Graphics. Digital Camera. Auto Shapes
AutoShape Using Graphics Internet The following graphic elements are available to enhance your presentation Clip Art AutoShapes Fill effects Shadow effects 3D effects Digital Camera WordArt Digital Camera
GIMP ANIMATION EFFECTS
GIMP ANIMATION EFFECTS Animation: Text Word by Word ANIMATION: TEXT WORD BY WORD GIMP is all about IT (Images and Text) BACKGROUND IMAGE Before you begin the text animation, you will download a public
DRAFT. Table of Contents About this manual... ix About CuteSITE Builder... ix. Getting Started... 1
DRAFT Table of Contents About this manual... ix About CuteSITE Builder... ix Getting Started... 1 Setting up... 1 System Requirements... 1 To install CuteSITE Builder... 1 To register CuteSITE Builder...
Exercise 4a: Creating and Editing XY Plots
Exercise 4a: Creating and Editing XY Plots This exercise uses the data file, LINACC. Step 1: Load the file LINACC and create multiple plots. 1. Open HyperWorks Desktop and set the application to HyperGraph
Word Getting Started The Word Window u vw. Microsoft QUICK Source. Creating a New Blank Document. Creating a New Document from a Template
Microsoft QUICK Source Word 2007 Getting Started The Word Window u vw x y z u Quick Access Toolbar contains shortcuts for the most commonly used tools. v Microsoft Office Button contains common file and
Device Monitor Screen 3-1. Let s Display Lamp 3-2. Let s Create Lamp to Display 4 States 3-6. Let s Display State of Device with Message 3-8
Chapter 3 Chapter 3 Device Monitor Screen Device Monitor Screen 3- Let s Display Lamp 3- Let s Create Lamp to Display 4 States 3-6 Let s Display State of Device with Message 3-8 Display Changes of Device
Exploring Microsoft Office Word 2007
Exploring Microsoft Office Word 2007 Chapter 3: Enhancing a Document Robert Grauer, Keith Mulbery, Michelle Hulett Objectives Insert a table Format a table Sort and apply formulas to table data Convert
GWXSlider ActiveX Control
M-Graphics User s Manual 17-1 Chapter 17 GWXSlider ActiveX Control Introduction The GWXSlider ia an ActiveX control that can be inserted into the M-Graphics application to display and modify analog data.
Unit 8. Lesson 8.1. Microsoft FrontPage. Introduction. Microsoft FrontPage-1. Microsoft FrontPage
Microsoft FrontPage Unit 8 Microsoft FrontPage Introduction Lesson 8.1 Microsoft FrontPage-1 A number of Software Packages are available in market for creating a website. Among popular software s are Dreamweaver,
Table of Contents. iii
ToolBook Concepts Table of Contents Welcome... 1 The Interface... 3 The Main Window... 3 The Menu Bar... 3 The Tool Bar... 4 View Descriptions of Icons on the Tool Bar... 5 Move and Resize the Tool Bar...
Word Select New in the left pane. 3. Select Blank document in the Available Templates pane. 4. Click the Create button.
Microsoft QUICK Word 2010 Source Getting Started The Word Window u v w x z Opening a Document 2. Select Open in the left pane. 3. In the Open dialog box, locate and select the file you want to open. 4.
From the Insert Tab (1), highlight Picture (2) drop down and finally choose From Computer to insert a new image
Inserting Image To make your page more striking visually you can add images. There are three ways of loading images, one from your computer as you edit the page or you can preload them in an image library
LAMPS CHAPTER Displaying Bit State Using Bit Lamps Displaying Word State Using Multi-state Lamps... 4
CHAPTER 6 LAMPS 6.1.Displaying Bit State Using Bit Lamps... 1 6.1.1. Basic Operations...1 6.1.2. Operation Options...1 6.1.3. Settings...1 6.1.4. General Settings...2 6.2. Displaying Word State Using Multi-state
Thermacam Reporter 2000 Professional Template Building Tutorial
Introduction: This tutorial will guide you step-by-step through the process of creating a new template using Thermacam Reporter 2000 Professional. The template consists of an item page with an IR image
Adding Pages. Adding pages to your website is simple and powerful! In just a few minutes you can create a page that: Highlights a special event
A STEP-BY-STEP A STEP-BY-STEP GUIDE GUIDE TO TO UPDATING ADDING PAGES NAVIGATION ACADEMY Adding Pages Adding pages to your website is simple and powerful! In just a few minutes you can create a page that:
University of Bahrain College of Applied Studies
University of Bahrain College of Applied Studies CSA 212: Human Interface and Design Activity 5: Front page 2003 Name : Student ID No : Section Instructor : : Demonstrator : Date : Total Marks : 10 Marks
How to Create an e-book. A Step-by-Step Illustrated Guide
How to Create an e-book A Step-by-Step Illustrated Guide 1 Table of Contents Introduction...3 Inserting or Changing an Image...6 Formatting the Default Paragraphs...14 Adding a Table of Contents...18 Setting
PowerPoint Tutorial 2: Adding and Modifying Text and Graphic Objects 2013
PowerPoint Tutorial 2: Adding and Modifying Text and Graphic Objects Microsoft Office 2013 2013 Objectives Insert a graphic from a file Insert, resize, and reposition clip art Modify the color and shape
Beginners Guide to Snippet Master PRO
Beginners Guide to Snippet Master PRO This document assumes that Snippet Master has been installed on your site. If not please contact the Bakas IT web team at webreg@bakasit.com.au. Initial Login Screen...
Create a Scrapbook Page
Create a Scrapbook Page You are now going to create a scrapbook page that will contain an arrangement of pictures and text. 1. Open Photoshop start > programs > Adobe Master Collection > Photoshop CS5
Zeppelin Website Content Manager User Manual
Zeppelin Website Content Manager User Manual 1. Introduction Zeppelin Website Content Manager is made for maintaining and editing the content of the website easily. Most of the contents inside the website
IX. Format Tips. Row & column autofit
IX. Row & column autofit Excel rows and columns have a standard height and width. You can check on the height of any row and the width of any column by clicking its header (or any cell) to select it and
Adding Dynamics. Introduction
M-Graphic s User s Manual 11-1 Chapter 11 Adding Dynamics Introduction This chapter explains how to make single or multiple dynamic connections from display objects to points from OPC data servers. This
/ off / off 3. Press the Power button on the back of the base to power on the lamp; hold on the power button in the middle of the navigation buttons to power on the digital photo frame. 1. Press Exit
Flowlogic. User Manual Version GraphLogic: Developed by scientists, for scientists. Graphing and Statistical Analysis.
Flowlogic Flow Cytometry Analysis Software Developed by scientists, for scientists User Manual Version 7.2.1 GraphLogic: Graphing and Statistical Analysis www.inivai.com TABLE OF CONTENTS GraphLogic Graphing
Microsoft Word (97, 98, 2000) Word Processing Instructions
Microsoft Word (97, 98, 2000) Word Processing Instructions Managing Toolbars Click on View. Select Toolbars. Click to select Standard, Formatting, and Drawing. Formatting Text 1. Once text is typed in,
Contact: Systems Alliance, Inc. Executive Plaza III McCormick Road, Suite 1203 Hunt Valley, Maryland Phone: / 877.
Contact: Systems Alliance, Inc. Executive Plaza III 11350 McCormick Road, Suite 1203 Hunt Valley, Maryland 21031 Phone: 410.584.0595 / 877.SYSALLI Fax: 410.584.0594 http://www.systemsalliance.com http://www.siteexecutive.com
Chromeleon software orientation
Chromeleon software orientation Upon opening of Chromeleon shortcut, a blue screen should appear (called control panel). If this does not occur, the green circled shortcut will open this screen. To ensure
1. Numerical Data Entry
. Numerical Data Entry Create a numerical data entry screen on which you can enter numerical data using a pop-up keypad. On this screen, the keypad is not shown normally, but is shown only when necessary.
AgWare ClickFORMS 7.0 Introductory Tutorial
AgWare ClickFORMS 7.0 Introductory Tutorial MAIN WINDOW If you have used Office 2007, our new layout will look familiar. Here is a screenshot of the new and improved AgWare ClickFORMS window: The Forms
#61-844SW ThermalVision Software Instruction Manual
ThermalVision Software Instruction Manual ND-7035-1 Page 1 of 23 Contents 1. Installing the ThermalVision software onto a PC... 3 2. Transferring saved images from the camera to the PC.... 3 2.1. Direct
PowerPoint Launching PowerPointX
PowerPoint 2004 Launching PowerPointX 1. Start PowerPoint by clicking on the PowerPoint icon in the dock or finding it in the hard drive in the Applications folder under Microsoft Office 2004. PowerPoint
Assignment #4: Creating New Layouts & Slides
Assignment #4: Creating New Layouts & Slides 1 In this lesson we will turn your database into a slideshow. You could make a slideshow out of the current layout, but you may want to create a different layout
URL for staff interface (bookmark this address on staff computers):
URL for public interface (link to this address): URL for staff interface (bookmark this address on staff computers): Application Name (for IIS): System Maintenance In the following Directory on your web
Create a Presentation with Microsoft Powerpoint
Create a Presentation with Microsoft Powerpoint Prepared by: Martin Soucy Provincial Service of RÉCIT in Vocational Training Copyright, Provincial Service of RÉCIT in Vocational Training 1 Objectives Learn
Desktop Publishing. MIT Computer Centre 5/1. Shortcut Key of UNDO is A) Ctrl + X B) Ctrl + H C) Ctrl + Y D) Ctrl + Z Correct Answer : D
Shortcut Key of UNDO is A) Ctrl + X B) Ctrl + H C) Ctrl + Y D) Ctrl + Z Desktop Publishing 2. What is the character to be shortened to its normal shape and display something below its location? A) Superscript
Chapter 11: Going All Out with FrontPage
Chapter 11: Going All Out with FrontPage Creating a Product Page Easy Web Design project, Chapter 11 Most store sites need at least one product page. On the Notebooks Web site, the Products page is divided
Creating a Flyer. Open Microsoft Publisher. You will see the list of Popular Publication Types. Click the Blank Page Sizes.
Creating a Flyer Open Microsoft Publisher. You will see the list of Popular Publication Types. Click the Blank Page Sizes. Double click on Letter (Portrait) 8.56 x 11 to open up a Blank Page. Go to File
FLIR Tools+ and Report Studio
Creating and Processing Word Templates http://www.infraredtraining.com 09-20-2017 2017, Infrared Training Center. 1 FLIR Report Studio Overview Report Studio is a Microsoft Word Reporting module that is
Introduction to Microsoft Word 2008
1. Launch Microsoft Word icon in Applications > Microsoft Office 2008 (or on the Dock). 2. When the Project Gallery opens, view some of the available Word templates by clicking to expand the Groups, and
A Frontpage Tutorial. Contents Page
A Frontpage Tutorial Contents Page Page 1-2 Things to do and know before we start Page 3.How to save your web pages Page 4.Opening an existing web page Page 5..Creating more web pages Page 6-8.Adding tables
Using Adobe Contribute 4 A guide for new website authors
Using Adobe Contribute 4 A guide for new website authors Adobe Contribute allows you to easily update websites without any knowledge of HTML. This handout will provide an introduction to Adobe Contribute
5 Control Reference! "! # $ # % " &
5 2 Control Definition Parts Reference Controls are the functional components of the parts which contain them. A control is called by either the Operation Parameter (must be enabled) or by a program. If
IMPORTING A DCS 2.0 FILE INTO CORELDRAW SOFTWARE
IMPORTING A DCS 2.0 FILE INTO CORELDRAW SOFTWARE This is an instructional guide for importing a CS2 file into CorelDRAW software. 1 Select New Graphic or go to the FILE MENU > NEW. 2 Go to the FILE MENU
QRG: Using the WYSIWYG Editor
WYSIWYG Editor QRG: Using the WYSIWYG Editor WYSIWYG stands for What You See Is What You Get. The WYSIWYG Editor is the reason you don t need to be an IT Programmer to write content for your web page.
WEEK NO. 12 MICROSOFT EXCEL 2007
WEEK NO. 12 MICROSOFT EXCEL 2007 LESSONS OVERVIEW: GOODBYE CALCULATORS, HELLO SPREADSHEET! 1. The Excel Environment 2. Starting A Workbook 3. Modifying Columns, Rows, & Cells 4. Working with Worksheets
Using Microsoft Word. Working With Objects
Using Microsoft Word Many Word documents will require elements that were created in programs other than Word, such as the picture to the right. Nontext elements in a document are referred to as Objects
Word 2013 Quick Start Guide
Getting Started File Tab: Click to access actions like Print, Save As, and Word Options. Ribbon: Logically organize actions onto Tabs, Groups, and Buttons to facilitate finding commands. Active Document
Starting ParTEST. Select Start, Programs ParTEST ParTEST Enter your User Name and password
Starting ParTEST User Login Select Start, Programs ParTEST ParTEST Enter your User Name and password If you still logged into ParTEST as the Administrator Select File, Logout. Enter your User name and
PEP Designer Operating Manual
PEP Designer Operating Manual FATEK AUTOMATION CORPORATION V1.0 Contents 1. Introduction...3 1.1 Operating Environment... 3 1.1.1 Operating systems... 3 1.1.2 Hardware requirements... 3 1.2 Functions and
Dreamweaver Basics Outline
Dreamweaver Basics Outline The Interface Toolbar Status Bar Property Inspector Insert Toolbar Right Palette Modify Page Properties File Structure Define Site Building Our Webpage Working with Tables Working
Chapter 5. Inserting Objects. Highlights
Chapter 5 Inserting Objects Highlights 5. Inserting AutoShapes, WordArts and ClipArts 5. Changing Object Position, Size and Colour 5. Drawing Lines 5.4 Inserting Pictures and Text Boxes 5.5 Inserting Movies
Web Publishing Basics II
Web Publishing Basics II Jeff Pankin Information Services and Technology Table of Contents Course Objectives... 2 Create a Site Definition... 3 The Dreamweaver CS4 Interface... 4 Panels are groups of icons
The Text scrap sheet is also needed for copying image and webpage URLs for easy access. Additionally you will use it to look at HTML when needed.
epro 2 Hints Always have open Word and Text scrap sheets so you can write your text, spell check etc. in Word. You MUST copy and paste your writings onto Text to remove formatting. The Text scrap sheet
Mastering EA Document Style Sheets
Mastering EA Document Style Sheets Introduction In order to provide a consistent look-and-feel to documents (RTF/DOCX/PDF) produced from Sparx Systems Enterprise Architect, Sparx Systems provided the facility
Display Systems International Software Demo Instructions
Display Systems International Software Demo Instructions This demo guide has been re-written to better reflect the common features that people learning to use the DSI software are concerned with. This
CPM-200 User Guide For Lighthouse for MAX
CPM-200 User Guide For Lighthouse for MAX Contents Page Number Opening the software 2 Altering the page size & Orientation 3-4 Inserting Text 5 Editing Text 6 Inserting Graphics 7-8 Changing the Colour
Finding your Pictures
Finding your Pictures Thursday, March 22, 2012 10:37 AM Image Quest Link 1. 2. Click on the Image Quest link Do a search for your pictures (THINK: KEYWORD) a. Click in the search box b. Type in your key
How to Add Text to an Animated Image
How to Add Text to an Animated Image In this tutorial, you ll learn how to create an inspirational animated file to use on social media using PhotoMirage and VideoStudio. We ll create an animated file
Label Design Program Label Artist-II Manual Rev. 1.01
Label Design Program Label Artist-II Manual Rev. 1.01 http://www.bixolon.com Contents 1. Introduction... 2 2. Supported Operating Systems... 2 3. Features... 3 3-1 Menu... 3 3-1-1 New... 3 3-1-2
Word Tips (using Word but these work with Excel, PowerPoint, etc) Paul Davis Crosslake Communications
Word Tips (using Word but these work with Excel, PowerPoint, etc) Paul Davis Crosslake Communications What tips are we going to discuss? First of all, HELP Fonts Tables Columns Pasting Images Mail Merge
Using Inspiration 7 I. How Inspiration Looks SYMBOL PALETTE
Using Inspiration 7 Inspiration is a graphic organizer application for grades 6 through adult providing visual thinking tools used to brainstorm, plan, organize, outline, diagram, and write. I. How Inspiration
Basic Concepts. Launching MultiAd Creator. To Create an Alias. file://c:\documents and Settings\Gary Horrie\Local Settings\Temp\~hh81F9.
Page 1 of 71 This section describes several common tasks that you'll need to know in order to use Creator successfully. Examples include launching Creator and opening, saving and closing Creator documents.
Microsoft PowerPoint 2002
Microsoft PowerPoint 2002 Creating a New Presentation Upon opening, PowerPoint 2002 will display a blank title slide for a new presentation. You can begin creating a PowerPoint presentation by typing the
ASIC-200 Version 5.0. integrated industrial control software. HMI Guide
ASIC-200 Version 5.0 integrated industrial control software HMI Guide Revision Description Date C Name change, correct where applicable with document 4/07 HMI Guide: 139168(C) Published by: Pro-face 750
4. If you are prompted to enable hardware acceleration to improve performance, click
Exercise 1a: Creating new points ArcGIS 10 Complexity: Beginner Data Requirement: ArcGIS Tutorial Data Setup About creating new points In this exercise, you will use an aerial photograph to create a new
Working With Images: Intermediate Photoshop
Working With Images: Intermediate Photoshop Viewing Information in the Layers Palette 1. Choose File > Open and open the Start.psd file in the Lesson01 folder located in the PS_Workshop folder on the desktop.
Simulator Instruction Manual
Simulator Instruction Manual RUN CHECKER Hakko Electronics Co., Ltd. Contents 1. Outline of Simulator...1 2. Composition of Simulator... 1 3. Operating the Simulator...2 3.1 Operation Flow... 2 To automatically
S7A Driver V 8.00 S7-1200/1500. Symbolic Addressing
Application Note S7A Driver V 8.00 connecting to a S7-1200/1500 via Symbolic Addressing Date: 10.08.2017 Author: J. Stähler, InCoSol - Industrial Communications Solutions Draft S7A Driver: Connecting to
Microsoft PowerPoint The Microsoft PowerPoint 2000 Screen. Leander ISD Technology Services CMB Title.
Microsoft PowerPoint 2007 The Microsoft PowerPoint 2007 Screen The Microsoft PowerPoint 2000 Screen Title Menu Bar Standard Formatting Toolbar Outline Pane Placeholders Slide Pane View Buttons Leander
ekaizen Lessons Table of Contents 1. ebook Basics 1 2. Create a new ebook Make Changes to the ebook Populate the ebook 41
Table of Contents 1. ebook Basics 1 2. Create a new ebook 20 3. Make Changes to the ebook 31 4. Populate the ebook 41 5. Share the ebook 63 ekaizen 1 2 1 1 3 4 2 2 5 The ebook is a tabbed electronic book
PJ-Net Organizer. Model No. POA-PN01A OWNER S MANUAL
PJ-Net Organizer Model No. POA-PN01A Preparation Installation Basic Setting and Operation Controlling the Projector Controlling the Multi-Projectors Controlling External Equipment Appendix OWNER S MANUAL
MELBOURNE LED LEDEDITOR 2016 SOFTWARE MANUAL
MELBOURNE LED LEDEDITOR 2016 SOFTWARE MANUAL Chapter 1: Introduction 1.1 Function Feature The LED Editor Version 2 has been upgraded to offer wider range of control and satisfy requirement of multi functions
How to use text. Adding a text frame
How to use text Because Adobe InDesign CS6 is a page layout tool, working with text is an important skill. With InDesign, you add all text (and all content) into frames. Frames are shapes (called paths)
The American University in Cairo. Academic Computing Services. Word prepared by. Soumaia Ahmed Al Ayyat
The American University in Cairo Academic Computing Services Word 2000 prepared by Soumaia Ahmed Al Ayyat Spring 2001 Table of Contents: Opening the Word Program Creating, Opening, and Saving Documents
2.1. Project Information and Protection Global Settings Working with Tags... 15
2.1. Project Information and Protection... 1 2.2. Global Settings... 3 2.2.1. Languages...4 2.2.2. Font Templates...5 2.2.3. Picture Database...6 2.2.4. Sound Database...10 2.2.5. Text Database...12 2.3.
More Skills 11 Format and Position Report Controls
= CHAPTER 5 Access More Skills 11 Format and Position Report Controls Controls can be aligned using buttons on the Ribbon. Using the Ribbon s alignment tools can be quicker and more accurate than positioning
Word 2010 Skills Checklist
S1 S2 Sharing and Maintaining Documents 1.1 Apply different views to a document Select zoom options Split windows Arrange windows Arrange document views Switch between windows Open a document in a new
Read Temperature Data
Read Temperature Data Exercise 5 Completed front panel and block diagram In this exercise, you will create a program using SensorDAQ s Analog Express VI to collect temperature data and display it on a
Altering Layouts. Changing Font. Universal Engraving Machine. Chapter 18 Altering Layouts
Universal Engraving Machine Changing Font Altering Layouts If you want to change the Font Style of your text. Left Click On the line you wish to change. If you wish to change more than one line, draw a
Visio Core Essentials
Visio 2013 - Core Essentials Prerequisites Windows Vista, Windows 7, or Windows 8 Overview This first level workshop shows participants how to get the most out of Microsoft Visio 2013. The course includes
FAPT PICTURE & FPAssist
FAPT PICTURE & FPAssist For Windows OPERATOR S MANUAL No part of this manual may be reproduced in any form. All specifications and designs are subject to change without notice. In this manual we have tried
EDITOR GUIDE. Button Functions:...2 Inserting Text...4 Inserting Pictures...4 Inserting Tables...8 Inserting Styles...9
EDITOR GUIDE Button Functions:...2 Inserting Text...4 Inserting Pictures...4 Inserting Tables...8 Inserting Styles...9 1 Button Functions: Button Function Display the page content as HTML. Save Preview
IT153 Midterm Study Guide
IT153 Midterm Study Guide These are facts about the Adobe Dreamweaver CS4 Application. If you know these facts, you should be able to do well on your midterm. Dreamweaver users work in the Document window
This section provides an overview of the features available within the Standard, Align, and Text Toolbars.
Using Toolbars Overview This section provides an overview of the features available within the Standard, Align, and Text Toolbars. Using toolbar icons is a convenient way to add and adjust label objects.