Mini-B Connectors, SMT mount receptacles meeting requirements of USB 2.0 Standard

Transcription

1 NEW Mini-B Connectors, SMT mount receptacles meeting requirements of USB 2.0 Standard UX60S Series Meets requirements of USB 2.0 Standard USB 2.0 certified Features. USB 2.0 Standard data transmission rate Max. data transmission rate of 480 Mbps. 2. Reduced size less board space Reduction in the overall length (as compared with other HRS versions) of the receptacle (7.0 mm) translates into less board mounting space.. Board placement with automatic equipment Flat top areas and packaging on tape-and-reel allows use of vacuum pick-up nozzles. Versions with heat resistant pick-up tape can be also supplied. 4. RoHS compliant All components and materials comply with the requirements of EU Directive 2002/95/EC Applications Personal computer peripheral equipment, data terminals, portable terminals, digital cameras, and MP players and other devices requiring use of Mini-B receptacles complying with all requirements of USB 2.0 Standard. Smaller size 9mm 7mm Other HRS version 22% Volume Reduction Ideal for the connection of personal computer peripherals

2 UX60S Series Mini-B Connectors, SMT mount receptacles meeting requirements of USB 2.0 Standard Specifications Ratings Voltage rating 5 V AC Operating temperature range -0 to +75ç Current rating A Storage temperature range -40 to +85ç (Note ) Item Specification Conditions. resistance 2.Insulation resistance.withstanding voltage 4.Capacitance 50 mø max. 00 Mø min. No flashover or insulation breakdown 2 pf max. 00 ma 00 V DC 00 V AC / one minute Measure between adjacent contacts at,000 ±0Hz 5.Total insertion/ withdrawal force Insertion force Withdrawal force : 5 N max. : 7 N min. Measure with an applicable connector. 6.Durability (mating/unmating) 7.Vibration 8.Random vibration 9.Shock 0.Heat Shock.Temperature cycle 2.Salt spray.solderablity With corresponding HRS connector. resistance: 70 mø max. Withdrawal force: N min. No electrical discontinuity of μs or longer No damage, cracks or parts dislocation. resistance: 70 mø max. Insulation resistance: 0 Mø min. (when dry) resistance: 70 mø max. Wet state, solder coverage area 95% min. 5,000 cycles Frequency 0 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the axial directions Frequency 50 to 2,000 Hz, directions for 5 minutes each. Acceleration of 490m/s 2, ms continuous time, sine half-wave, cycles in each of the 6 directions Temperature:-55ç / +20ç to 5ç / +85ç / +20ç to 5ç Time: 0min. / 2 to min. / 0 min. / 2 to minutes 0 cycles 7 cycles (68 hours) at -0 to 65ç, humidity of 90 to 98% 48 hours, 5% solution of salt water Solder temperature 245ç, immersion time 2 to seconds Note : The term storage refers to connectors stored for a long period of time prior to mounting and use. Materials and Finish Part Material Finish Remarks Insulator Synthetic resin Color: Black UL94V-0 s Copper alloy area: Gold plated Lead area: Gold plated Shell Copper alloy Tin plated

3 UX60S Series Mini-B Connectors, SMT mount receptacles meeting requirements of USB 2.0 Standard Ordering information UX60S C - MB - 5 S T Series name UX60S (Mini - USB, Receptacle, reduced size) Mating side configuration C : Standard A : With interface entry angle Connector style MB : Mini-B receptacle Number of contacts 5 type S : Female Shell termination style T : SMT 8 : Solder, through hole (solder tab length mm) Latest Engineering Drawings containing more information may be requested using exact part numbers from individual pages of this catalog.

4 All non-rohs UX60S products Series Mini-B have been discontinued, Connectors, or will be discontinued SMT soon. mount Please receptacles check the products meeting status on requirements the Hirose website RoHS of USB search 2.0 at Standard or contact your Hirose sales representative. Receptacle -With interface entry angle Part No. CL No. RoHS UX60SA-MB-5ST YES Note : Tape and reel packaging (,000 pieces/reel). Order by number of reels. (.5).8 BRecommended PCB mounting pattern () 5. Vacuum pick-up area : No conductive traces No. 9.9 (8.7) No.5.9 (4.9) (0.64) PCB edge Outline of the connector Recommended clearance areas Dimensions shown in the shaded areas (in the illustrations below) must be free of any materials or components, as this may interfere with the free movement of the ground contacts. A 5MIN.MIN A-A 0.4MIN 4.7 MIN 2.MIN 0.5MIN A Section A-A BMated Assembly Receptacle - with interface entry angle Shown for Reference (.5) (6) Receptacle Plug 4

5 All non-rohs products have been discontinued, or will be discontinued UX60S soon. Series Mini-B Please check the products Connectors, status the SMT Hirose website mount RoHS receptacles search at meeting requirements or contact of your USB Hirose 2.0 sales Standard representative. Receptacle - Standard Shell SMT Part No. CL No. RoHS UX60SC-MB-5ST YES Note : Tape and reel packaging (,000 pieces/reel). Order by number of reels. BRecommended PCB mounting pattern (.5) (). 5. Vacuum pick-up area 0.5 : No conductive traces No. 9.8 No PCB edge Outline of the connector Receptacle - Standard - Shell through Hole Part No. CL No. RoHS UX60SC-MB-5S YES Note : Tape and reel packaging (,000 pieces/reel). Order by number of reels. (.5) BRecommended PCB mounting pattern () Vacuum pick-up area PCB edge Outline of the connector R0.55(Land) R0.5 (Through hole). 0.7(Through hole).(land) : No conductive traces.7.2 (Through hole).6 (Land) No No

6 All non-rohs UX60S products Series Mini-B have been discontinued, Connectors, or will be discontinued SMT soon. mount Please receptacles check the products meeting status on requirements the Hirose website RoHS of USB search 2.0 at Standard or contact your Hirose sales representative. Recommended clearance areas Dimensions shown in the shaded areas (in the illustrations below) must be free of any materials or components, as this may interfere with the free movement of the ground contacts MIN MIN 5MIN.MIN 0.5MIN 0.4MIN BMated Assembly Receptacle Shown for Reference (.5) Receptacle Plug 6

7 All non-rohs products have been discontinued, or will be discontinued UX60S soon. Series Mini-B Please check the products Connectors, status the SMT Hirose website mount RoHS receptacles search at meeting requirements or contact of your USB Hirose 2.0 sales Standard representative. BPackaging Specifications Embossed carrier tape dimensions 2 2 Ø Unreeling direction Reel Dimensions (0.4) (Ø) Unreeling direction (24.4) (Ø80) BRecommended temperature profile Lead-free solder paste Temperature:(ç) ±0ç 80~0S 20ç min. MAX 50S HRS test condition Solder composition : Paste Cu/ 96.5% Sn/.0% Ag/0.5% Test board : Glass epoxy 5mm 5mm mm thick ç min. MAX 80S The temperature profile is based on the shown conditions. In individual applications the temperature may vary, depending on solder paste type, volume/thickness and board size/thickness. Consult your solder paste and equipment manufacturer for specific recommendations. 0 Average slope 2ç / sec. Time (Seconds) 7