0.4mm Contact Pitch, 1.5mm above the board, Board-to-Board / Board-to-FPC Connectors DF18 Series

Transcription

1 0.4mm Contact Pitch, 1.5mm above the board, BoardtoBoard / BoardtoFPC Connectors F18 Series Low profile Boardtoboard distance of 1.5 mm FPC Stiffener Board FPC Stiffener Board Features 1. llows higher mounting density of board components xtremely small board mounting pattern and low abovetheboard profile makes the connector suitable for small device applications. 2. High Contact Reliability espite it s small size and low profile the contacts have large deflection distance, guaranteeing reliable electrical performance. 3. Good Mating Characteristics Large leadin distance of 0.33 mm in horizontal directions and tactile click confirms fully mated condition of connectors. 4. Optional dditional Board Retention For applications requiring extrastrong hold of connectors to the board connectors can be ordered with optional metal holddown. 5. utomatic Board Placement Connectors have large flat width (Plug: 1.4 mm, Receptacle: 1.44mm) to accommodate pickup with automatic placement machines. High Contact Reliability ffective connection wipe of 0.4 mm Male contact Plug Receptacle Female contact Selfalignment distance: 0.33 mm 0.33mm lectrical connec tion wipe :0.4mm 1.5mm above the board pplications igital video cameras, igital still cameras, cellular phones, miniature displays, cameras portable equipment and other applications requiring small reliable boardtoboard and FPCtoBoard connections

2 Product Specifications Rating Current rating Voltage rating V C Operating temperature range Operating humidity range 35 o C to +85 o C (Note 1) 40 o C to 80 o C (Note 2) Storage temperature range Storage humidity range 10 o C to +60 o C (Note 2) 40 o C to 70 o C (Note 2) Item 1. Insulation resistance 2. Withstanding voltage 3. Contact resistance 4. Vibration 5. Humidity 6. Temperature cycle 7. urability (insertion/ withdrawal) 8. Resistance to soldering heat Specification 50 M ohms min. No flashover or insulation breakdown. 60 m ohms max. No electrical discontinuity of 1 ms or more. Contact resistance: 60 m ohms max. Insulation resistance: 25 M ohms min. Contact resistance: 60 m ohms max. Insulation resistance: 50 M ohms min. Contact resistance: 60 m ohms max. No deformation of any component. No affect on contacts. Conditions 100 V C 100 V C / one minute 1 m C, 20mv max., 1KHz Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours / 3 axis. 96 hours at temperature of o C and humidity of 90 to 95% Temperature: 55 o C> +15 o C to +35 o C> +85 o C> +15 o C to +35 o C uration: 30 > 2 to 3 > 30 > 2 to 3 (Minutes) 5 cycles 50 cycles Reflow: t the recommended temperature profile Manual soldering: 300 o C for 3 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers nonconducting condition of installed connectors in storage, shipment or during transportation. Materials Product Part Material Finish Remarks Receptacles Plugs Insulator Contacts LCP Copper alloy Color: Black Gold plated UL94V0 Metal fittings Brass Tin plated Ordering Information Receptacles / Plugs Series name: F18 3 : 20, 30, 40, 50, 60, 70, 80, 100, Terminal type V: SMT vertical mounting type 2 Holddown bracket type B: With metal holddown (receptacles only) C: With added holddown contacts(plug only), without metal holddown (receptacle only) : With added holddown contacts,increased Removal Force Type(plug only) : With added holddown contacts,increased Removal Force Type(plug only) 4 5 Connector type S: oublerow receptacle P: oublerow plug Contact pitch 0.4 mm 7 Packaging type (51): Plug,embossed tape packaging (2,000 pieces per reel) (81): Receptacle,embossed tape packaging (2,000 pieces per reel) 2

3 Receptacles (with metal holddown) PCB mounting pattern Unit: mm F18B 20S0.4V (81) F18B 30S0.4V (81) F18B 40S0.4V (81) F18B 50S0.4V (81) F18B 60S0.4V (81) F18B 70S0.4V (81) F18B 80S0.4V (81) F18B100S0.4V (81) F18B120S0.4V (81) Reserved for product expansion Reserved for product expansion B C Note: mbossed tape reel packaging(2,000 pieces/reel) Order by the number of reels. 3

4 Receptacles (without metal holddown) Note: Please specify metal fittings when connecting rigid PCB s. PCB mounting pattern Unit: mm F18C 20S0.4V (81) F18C 30S0.4V (81) F18C 40S0.4V (81) F18C 50S0.4V (81) F18C 60S0.4V (81) F18C 70S0.4V (81) F18C 80S0.4V (81) F18C100S0.4V (81) F18C120S0.4V (81) Note: mbossed tape reel packaging (2,000 pieces/reel) Order by the number of reels. 4

5 Plugs (with metal holddown terminals) C 0.04 P= B t= Note 1 Note 1 PCB mounting pattern Note 1 Note (C1.6) 0.02 P= dded holddown contacts , Note 1: The terminals located at each of the 4 corners provide additional hold to the board s mounting surface and are not part of electrical connection. When counting the terminal leads the number of actual electrical circuits is lower by 4. xample: Connector with 24 terminal leads will have 20 actual electrical connections when mated with corresponding part. Note 2: Please note that mounting of parts within the area of the broken lines will prevent the connector from mating. : When the corresponding connector is F18B S0.4V ( ) : When the corresponding connector is F18C S0.4V ( ) Plugs (with metal holddown terminals, increased Removal Force) F1820P0.4V (51) F1830P0.4V (51) B C Plugs (with metal holddown terminals, increased Removal Force) F1840P0.4V (51) F1850P0.4V (51) B C Plugs (with metal holddown terminals) F18C 60P0.4V (51) F18C 70P0.4V (51) F18C 80P0.4V (51) F18C100P0.4V (51) F18C120P0.4V (51) B C

6 mbossed Carrier Tape imensions Receptacles P= J 0.1 H 0.1 G 0.3 F F ( 6) ( 4.2) F F Unreeling direction Reel dimensions Part number label ( 80 ) K +2 0 (K+6)MX F18B 20S0.4V F18C 20S0.4V F18B 30S0.4V F18C 30S0.4V F18B 40S0.4V F18C 40S0.4V F18B 50S0.4V F18C 50S0.4V F18B 60S0.4V F18C 60S0.4V F18B 70S0.4V F18C 70S0.4V F18B 80S0.4V F18C 80S0.4V F18B100S0.4V F18C100S0.4V F18B120S0.4V F18C120S0.4V G H J K Note: Bottom side feed holes are added to embossed tape when G = 32.0 or greater. 6

7 Plugs P= H 0.1 G 0.1 F 0.3 (4.18) Unreeling direction Reel dimensions Part number label ( 80 ) K +2 0 (K+6)MX F18 20P0.4V F18 30P0.4V F18 40P0.4V F18 50P0.4V F18C 60P0.4V F18C 70P0.4V F18C 80P0.4V F18C100P0.4V F18C120P0.4V F G H K Note: Bottom side feed holes are added to embossed tape when F = 32.0 or greater. 7

8 Usage Recommendations 1. Recommended temperature profile Temperature 250 o C 200 o C IR Reflow Preheating: 150 o C 30 to 90 sec. Soldering: o C for 10 sec. Max. 220 o C min. for 10 to 20 sec. 240 o C max. 220 o C 150 o C 100 o C 50 o C Preheating Soldering 0 o C 0 sec. 50 sec. 100 sec. 150 sec. Time Note 1: Up to 2 cycles of reflow soldering are possible under the same conditions, provided that there is a return to normal temperature between the first and second cycle. Note 2: The temperature profile indicates the board surface temperature at the point of contacts with the connector terminals (for surface mounted plug assembly). 2. Recommended soldering conditions Soldering temperature: o C, soldering time: within 2 sec. 3. Recommended screen thickness and open area ratio (Pattern area ratio) Thickness: 0.12 mm Open area ratio: 70% 4. Board warping Maximum of 0.03mm at the connector center section, with both ends of the connector as reference points. 5. Cleaning conditions Refer to "Nylon Connector Use Handbook". 6. Precautions xcessive twisting when mating/unmating may cause damage to the connectors. Specify receptacles with the metal holddown when connecting rigid (non flexible) printed circuit boards. US: HIROS LCTRIC U.S.., INC Westhills Court, Simi Valley, C Phone : Fax : UNIT KINGOM: HIROS LCTRIC UK LT. Crownhill Business Centre 22 Vincent venue Crownhill, Milton Keynes MK8 OB Phone : Fax : HONG KONG: HIROS LCTRIC CO., LT. Unit 506, nergy Plaza. 92 Granville Road, Tsim Sha Tsui ast, Kowloon Phone : Fax : GRMNY: HIROS LCTRIC GmbH Zeppelinstrasse Ostfildern Kemnat Phone : Fax : KOR: HIROS KOR CO., LT. (#2N311,Shihwa Industrial Complex), , Jeoungwhangong, ShihungCity, Kyunggio Phone : , 7352 Fax : TIWN: HIROS LCTRIC TIWN CO., LT. No.28 Lane 247 Sec. 2 Yen Ping N,Rd.Taipei Phone : , 7352 Fax : TH NTHRLNS: HIROS LCTRIC B.V. Beechavenue PV SchipholRijk Phone : Fax : CHIN: HIROS LCTRIC TRING(SHNGHI) CO., LT. 3705,Bund Center,222 Yan n Road(), Shanghai Phone : Fax : SINGPOR: HIROS LCTRIC CO., LT. 10 nson Road #3413 International Plaza Phone : Fax : HIROS LCTRIC CO., LT. 523,OSKI 5CHOM,SHINGWKU,TOKYO ,JPN PHON: , FX: The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of product improvements.