Assembly Instructions

Transcription

1 Assembly Instructions MKG_NA_Instructions_H-line_V13_ But also...

2 for choosing Thank you,

3 Table of Contents GREY YELLOW PINK GREEN PURPLE DARK GREEN LIGHT BLUE ORANGE BLUE Identification of the Crate 4 Assembly Guidelines 5 Smart, optimized storage 6 Module Color-Coding and Chronology (Example) 7 Connecting Frames 8 Standard Lightbox Module 10 Angled Module 11 Storage Module (38x38) and Closet 12 Storage Module (38x76) 13 Shelving Module 14 Multimedia Module 15 Arch Module 16 Console Module 18 Header Module 19 Signage Module 21 Counter Module 22 Counter Module (Door) 22 Connection Module 23 Finishing Touches 24 Feet Profile Covers Shelves 25 Hanging Rod Free-Standing Shelf 26 LED Lights Power Supply Attachment 27 Graphics 28 3

4 Identification of the Crate H3 CRATE CONNECTORS ACCESSORIES FURNISHINGS 4

5 Assembly Guidelines Do not disassemble the frame or remove the graphic Do not place the frame on the ground graphic side down

6 Smart, optimized storage 38" 9.5" 19" FRAME CONNECTION Console Module Counter Module Angled pole storage 19" Header Module Some frames are connected during shipping Standard Module 19" To disconnect the frames, refer to the corresponding modules (see table of contents) Standard Module 9.5" 6

7 Module Color-Coding and Chronology (Example) Start Here PINK 1. Find the "Start Here" arrow on your booth rendering Look at module colors on your booth rendering and refer to the corresponding pages. 23 BLUE Locate frames in the crate using the numbering system 3. Look at the frame's color 4. Locate the page with the corresponding color in the instructions 5. Assemble your stand following the chronological order 7

8 Connecting Frames 1 Open completely Connector Insert 2 3 Lock 1/4 turn 8

9 Connecting Lightbox Frames Standard frame / lightbox connection Connector Open completely 1/4 turn Insert Lock Lightbox / lightbox connection Connector Open completely Insert 1/4 turn Lock 9

10 Standard Lightbox Module 1 Rotate feet 2 Plug (optional) GREY 10

11 Angled Module 1 Identify 2 Attach 3 Connect GREY YELLOW x4 Angled pole 11

12 Storage Module (38x38) and Closet 1 Attach the door 2 Connect the frames 3 Snap profile covers into place PINK Black inside graphics See storage accesories (p25) x8 Open door Lock door for transport x2 12

13 Storage Module (38x76) 1 Attach the door 2 Connect the frames 3 Snap profile covers into place PINK Black inside graphics See storage accesories (p25) 2 Open door Lock door for transport x2 13

14 Shelving Module 1 Rotate feet 2 Insert shelves GREY YELLOW PINK GREEN 3 Adjust level 22 lbs 14

15 Multimedia Module 1 Rotate feet 2 Attach TV 3 Insert lock PURPLE Side View Rear View TV wires Push lightly on the graphic Location for lock 15

16 Arch Module 1/2 1 Rotate feet 2 Position yourself where the canopy will go 3 Place the canopy frame so that the edge straddles the vertical panel DARK GREEN x2 16

17 Arch Module 2/2 4 Connect 5 Position the arch 6 Snap profile covers into place DARK GREEN Front canopy attachment Rear canopy attachment x2 x4 17

18 Console Module 1 Disconnect the frames 2 Connect the frames 3 Snap profile covers into place x2 4 Insert console top Attach console top GREY YELLOW PINK 1 GREEN PURPLE DARK GREEN LIGHT BLUE 2 x5 Transport position 18

19 Header Module 1/2 1 Disconnect the frames 2 Insert the connection tubes 3 Insert 4 Add ORANGE x6 x8 Transport position 19

20 Header Module 2/2 5 Lock 6 Position 7 Lock 8 Snap ORANGE x8 x4 20

21 Signage Module 1 Connect the attachment bar or GREY YELLOW PINK GREEN PURPLE DARK GREEN LIGHT BLUE ORANGE 19" x 47" vertical rectangle 19" x 47" horizontal rectangle 19" x 19" square x4 2 Attach to frame Different attachment positions For the backlit version, refer to page 27 21

22 Counter Module 1 Connect at an angle 2 Position shelf 3 Snap profile covers into place GREY YELLOW PINK GREEN PURPLE DARK GREEN LIGHT BLUE ORANGE BROWN BLUE x4 x6 With door 3b Attach door Snap profile covers into place x4 5 Place countertop Door x4 22

23 Connection module Double straight counter Connect the two counters to the connection module Double corner counter 1 Connect at an angle GREY YELLOW PINK GREEN PURPLE DARK GREEN 2 Connect the counters LIGHT BLUE ORANGE BROWN BLUE x6 3 Place the countertop 0 23

24 Finishing Touches Single-sided feet Profile covers Snap Closed position for transport Open and locked position Free-standing position Double-sided feet Click Click 24

25 Finishing Touches Shelves 1 Identify Locate pierced areas on graphics Hanging rod 1 Insert hanging rod Only for HMR038, HMR138, HMR019, HMR119 2 Insert 2 Hang 3 Adjust Hangers included Load < 22 lbs Header position 25

26 Finishing Touches Free-standing shelves LED light Assemble 1 2 x4 x4 2 x4 3 26

27 Finishing Touches Power supply attachment for backlit signage module Insert 1/4 turn Lock Open completely Attaches anywhere 27

28 Graphics Multi-panel option For: changing graphics rear graphics or multi-panel options Ensure that your frames are connected and the extremities are free Silicone edge insertion orientation Graphic orientation 1 Position corners 2 Insert silicone edges in the center 3 Repeat at the center of each segment 4 Finish with small pushes 28

29 Demand the original This will guarantee that you are in compliance with the fireproofing standards of your country