RSS10. Installation Manual. Document Code: IM

Transcription

1 IM

2 The copyright in this document is the property of Eldes. The document is supplied by Eldes on the express understanding that it is to be treated as confidential and that it may not be copied, used or disclosed to others in whole or in part for any purpose except as authorized in writing by Eldes. Eldes s.r.l. Via di Porto 2/B 50018, Scandicci, Firenze Italy Page 2 of 34 Proprietary Information IM

3 Summary 1. Introduction Generality Minimum system requirements RSS10 Installation RSS10 Server Installation Preliminary steps RSS10 installation Post-installation steps RSS10 Client Installation Preliminary steps RSS10 installation Post-installation steps RSS10 Setup RSS10 first post-installation start GestProc multi-database Installation and Configuration of Windows components Firewall configuration FTP Service installation and configuration IM Proprietary Information Page 3 of 34

4 List of Figures Fig. 3-1 Installation Welcome Fig. 3-2 Software selection Fig. 3-3 Installation path Fig. 3-4 Menu start folder Fig. 3-5 Begin installation Fig. 3-6 Installation Complete Fig. 4-1 Language selection Fig. 4-2 Password selection Fig. 4-3 Configuration program main window Fig. 4-4 Connections configuration Fig. 4-5 New connection wizard Fig. 4-6 Server Settings Fig. 4-7 Communication port settings Fig. 4-8 Database connection settings Fig. 4-9 Connection name Fig Connection creation complete Fig GestProc Fig. 5-1 Windows Firewall access Fig. 5-2 Windows Firewall settings Fig. 5-3 Windows Firewall disabling Fig. 5-4 Turn Windows features on or off Fig. 5-5 Windows IIS - FTP Server Fig. 5-6 Windows Administrative Tolls - IIS Manager Fig. 5-7 IIS Manager panel Fig. 5-8 IIS Manager - Add FTP Site Fig. 5-9 FTP Site name and path Fig Binding and SSL Settings Fig Authentication and Authorization Fig IIS Manager - Menu Edit Permissions Fig IIS Manager - User Permissions Page 4 of 34 Proprietary Information IM

5 Revisions record sheet RSS10 Document Code : IM March 2011 First issue: aligned to ver. 5.6 Rev. 01 March 2012 Revised: Aligned to ver SR1 Rev. 02 IM Proprietary Information Page 5 of 34

6 Page Blank Page 6 of 34 Proprietary Information IM

7 List of Acronyms Acronym CD IIS PC RSS10 Meaning Compact Disk Internet Information Services Personal Computer Radar Supervision System IM Proprietary Information Page 7 of 34

8 Blank Page Page 8 of 34 Proprietary Information IM

9 1. Introduction 1.1. Generality This manual describes the procedure for correctly installing and configuring the RSS10 software. The RSS10 software suite is composed of: RSS10 Server RSS10 Client 1.2. Minimum system requirements For a correct operation, the PC where the RSS10 Server is installed must be configured with one of the following Operating System : Windows XP Professional Windows 2003 Windows 2008 Windows 7 IM Proprietary Information Page 9 of 34

10 Page Blank Page 10 of 34 Proprietary Information IM

11 2. RSS10 Installation In this chapter the procedure to install the RSS10 is described RSS10 Server Installation Here the procedure to install the RSS10 Server pack is described Preliminary steps Install and configure the FTP Service as described in the par Make sure the graphic card is correctly installed and configured. Install and configure a modem. Properly configure the firewall as described in par RSS10 installation Run the installation package of RSS10 and proceed as described in chapter Post-installation steps Restart the PC. Configure the system as described in chapter 4. IM Proprietary Information Page 11 of 34

12 2.2. RSS10 Client Installation Here the procedure to install the RSS10 Client pack is described Preliminary steps Make sure the graphic card is correctly installed and configured RSS10 installation Run the installation package of RSS10 and proceed as described in chapter Post-installation steps Restart the PC. Configure the system as described in chapter 4. Page 12 of 34 Proprietary Information IM

13 3. RSS10 Setup In this chapter, the installation of the RSS10 package is described. Insert the RSS10 installation CD in the CD drive and proceed as follows: Click on the RSS10 installation icon. The Fig. 3-1 appears. Click Next to continue. Fig. 3-1 Installation Welcome IM Proprietary Information Page 13 of 34

14 The Fig. 3-2 asks for the software selection to install: select RSS10-SRV and click Next. Fig. 3-2 Software selection The following figure shows the installation path: it is possible to select the installation folder for the software RSS10 by clicking on button Browse... (default setting C:\RSS10\... ). Click Next to continue. Fig. 3-3 Installation path Page 14 of 34 Proprietary Information IM

15 Through the Fig. 3-4 select the menu start folder (default RSS10) and click Next to continue. Fig. 3-4 Menu start folder On the Fig. 3-5 click Install to begin the installation. Fig. 3-5 Begin installation IM Proprietary Information Page 15 of 34

16 When the installation is complete the Fig. 3-6 appears. RSS10 Fig. 3-6 Installation Complete Page 16 of 34 Proprietary Information IM

17 4. RSS10 first post-installation start Once the RSS10 is installed it is necessary to create a new archive and then to make a first configuration of the system according to the following steps: From Program menu, select the folder RSS10 (or whatever configured) and run the SysCfg, in order to configure for the first time the RSS10 archives. The application asks for the language selection as shown in Fig. 4-1: Fig. 4-1 Language selection To access the archives the password is required. The default password is rss10md where m is for current month (January = 1, February = 2, do not add zeros to the month number) and d is for current day (from 1 to 31, do not add zeros to the day number). Fig. 4-2 Password selection If the correct password is entered, the first window of the configuration program will appear (see Fig. 4-3). IM Proprietary Information Page 17 of 34

18 Fig. 4-3 Configuration program main window Select the tab Connections and click on Add to create a new connection (see Fig. 4-4). Fig. 4-4 Connections configuration Page 18 of 34 Proprietary Information IM

19 The Fig. 4-5 appears: click on Avanti to continue. Fig. 4-5 New connection wizard Configure the name of the server where the archive resides. - In case of RSS10 Server, leave the default setting localhost (that is the database will be created on the PC where we are installing the software). - In case of RSS10 Client enter the IP address or the name of the PC where the RSS10 archive is present. Clicking on Ping it is possible to verify if the entered address is reachable. - Click Next to continue. Fig. 4-6 Server Settings IM Proprietary Information Page 19 of 34

20 On the following window click Next to continue leaving all default settings. Fig. 4-7 Communication port settings On the Fig. 4-8 execute the following operation, depending on the version of the software installed: - RSS10 Server Select Local Connection; Select Create Database and DSN; Insert in the field Data Base the name you want to give to the database to be created (default rss10 ); Insert in the field Engine the name you want to give to the Database engine (default rss10 ). - RSS10 Client Select Remote Connection; Insert in the field Data Base the name of the Database present on the Server; Insert in the field Engine the name of the database engine present on the Server. Page 20 of 34 Proprietary Information IM

21 Fig. 4-8 Database connection settings Insert a name for the connection that has just been created and then click on Finish. Fig. 4-9 Connection name IM Proprietary Information Page 21 of 34

22 In case of no errors a message of successful database creation will appear and the connection details will appear on the Connection tab, see Fig Fig Connection creation complete Now make the GestProc run and, as soon as the Fig is shown, it is possible to make the ClientMap run. Page 22 of 34 Proprietary Information IM

23 4.1. GestProc multi-database GestProc provides the possibility to start more databases at the same time on the same machine. To be able to do that, it is necessary that the database of local connections defined in the SysCfg are configured to use the same engine. Run the GestProc, select from the list the connections you need to start and then click on the button Connect. Fig GestProc All of the selected databases will be loaded in the same engine (whose name is specified in the column Engine). Note Since the databases are manually run, when the GestProc is closed, the database server will still be running. To close it, go to the Windows application bar, click with right-hand mouse button on the relative icon and select Exit. IM Proprietary Information Page 23 of 34

24 Page Blank Page 24 of 34 Proprietary Information IM

25 5. Installation and Configuration of Windows components In this chapter the procedure to configure Windows 7 is shown. In case of another operating system, for more specific information, please refer to the relative Windows guide and manuals Firewall configuration To set the Firewall in order the make the communication between the peripheral and the centre possible proceed as follows: From Control Panel menu select System and Security and then the item Windows Firewall. Fig. 5-1 Windows Firewall access IM Proprietary Information Page 25 of 34

26 On the left panel, select Turn Windows Firewall on or off. RSS10 Fig. 5-2 Windows Firewall settings Page 26 of 34 Proprietary Information IM

27 Disable the firewall by checking the relative options, see Fig Fig. 5-3 Windows Firewall disabling IM Proprietary Information Page 27 of 34

28 5.2. FTP Service installation and configuration The FTP service can be installed during the operating system installation (Internet Information Services). It can also be installed later, according to the following procedure: From Control Panel select Programs and Features - Turn Windows features on or off. Fig. 5-4 Turn Windows features on or off If you expand the Internet Information Services tree node, you can see that there are a lot of options beneath it. Check FTP Server and the sub-options FTP Service and FTP Extensibility. Fig. 5-5 Windows IIS - FTP Server Page 28 of 34 Proprietary Information IM

29 On the Control Panel - Administrative Tools check the availability of the IIS Manger and double click on it (see Fig. 5-6). Fig. 5-6 Windows Administrative Tolls - IIS Manager The IIS Manager Panel appears as shown in Fig Fig. 5-7 IIS Manager panel IM Proprietary Information Page 29 of 34

30 Click on the Sites and select Add FTP Site. Fig. 5-8 IIS Manager - Add FTP Site Set the FTP site name and the path as shown in Fig Fig. 5-9 FTP Site name and path Page 30 of 34 Proprietary Information IM

31 On the Fig set No SSL. Fig Binding and SSL Settings On the Fig set Anonymous authentication and Read and Write permission. Click Finish to complete the FTP site creation. Fig Authentication and Authorization IM Proprietary Information Page 31 of 34

32 On the IIS Manager panel, right click on the Default FTP Site and select Edit Permission. Fig IIS Manager - Menu Edit Permissions Select the Security Tab, select Users group and click on Edit button: allow Full control option. Page 32 of 34 Proprietary Information IM

33 Fig IIS Manager - User Permissions IM Proprietary Information Page 33 of 34

34 Page Blank Page 34 of 34 Proprietary Information IM